Okay, let's solve this step-by-step:
1) Initially at 150.0°C, the pressure in the can is 890.0 mm Hg
2) Convert mm Hg to atm (atmospheres): 890.0 mm Hg / 760 mm Hg/atm = 1.165 atm
3) The temperature changes from 150.0°C to 35.0°C. This is a decrease of 150.0 - 35.0 = 115.0°C
4) For an ideal gas, PVT=kT (pressure x volume x temperature = constant k). Since volume (V) remains constant,
the pressure (P) is inversely proportional to temperature (T).
5) So final pressure = (initial pressure) * (final T) / (initial T)
= (1.165 atm) * (35.0 + 273.15 K) / (150.0 + 273.15 K)
= 0.392 atm
In atmosphere (atm): 0.392
Showing all work:
Initial pressure (mm Hg): 890.0
Converted to atm: 890.0 / 760 = 1.165 atm
Initial T (°C): 150.0
Initial T (K): 150.0 + 273.15 = 423.15 K
Final T (°C): 35.0
Final T (K): 35.0 + 273.15 = 308.15 K
PVT = kT (constant k)
So P ∝ 1/T
Final P (atm) = (1.165 atm) * (308.15 K) / (423.15 K) = 0.392 atm
In atm: 0.392
Let me know if you have any other questions!
The new pressure in the can will be 0.851 atm when it is cooled to 35.0 degrees C.
What is the combined gas law?The combined gas law is given by:
P₁/T₁ = P₂/T₂
where P₁ and T₁ are the initial pressure and temperature, and P₂ and T₂ are the final pressure and temperature. The volume is constant, so we can ignore it in this problem.
First, we need to convert the initial and final temperatures to Kelvin:
T₁ = 150.0 + 273.15 = 423.15 K
T₂ = 35.0 + 273.15 = 308.15 K
Next, we can plug in the values and solve for P₂:
P₁/T₁ = P₂/T₂
(890.0 mmHg)/(423.15 K) = P₂/308.15 K
P₂ = (890.0 mmHg)(308.15 K)/(423.15 K)
P₂ = 647.3 mmHg
Finally, we can convert the pressure to atm:
P₂ = 647.3 mmHg × (1 atm/760 mmHg)
P₂ = 0.851 atm
Therefore, the new pressure in the can will be 0.851 atm when it is cooled to 35.0 degrees C.
Learn more about the combined gas law, here:
https://brainly.com/question/30458409
#SPJ2
In Part 4 the indicator methyl orange is used and is ___ in acidic solutions below pH 3.2, it is ___ in solutions above pH 4.4 and is orange in between. a. red, yellow b. yellow, red c. orange, orange
d. blue, red
As given, the indicator methyl orange is used and is red in acidic solutions below pH 3.2, it is yellow in solutions above pH 4.4, and is orange in between. So, the correct answer is: a. red, yellow
Methyl orange is an indicator that is used to measure the pH of a solution. When the pH of the solution is below 3.2, the indicator is red in color. This indicates that the solution is acidic. When the pH of the solution is above 4.4, the indicator is yellow in color. This indicates that the solution is alkaline or basic. Finally, when the pH of the solution is between 3.2 and 4.4, the indicator is orange in color. This indicates that the solution is neutral.
To learn more about methyl orange click here https://brainly.com/question/14865356
#SPJ11
For the titration of 25.0mL of 0.20 M hydrofluoric acid with 0.20 M sodium hydroxide, determine the volume of base added when pH is a) 2.85 b)3.15 c)11.89 in mL .
The volume of base added when pH is 2.85 is 18.75 mL, when pH is 3.15 is 21.25 mL, and when pH is 11.89 is 25.00 mL.
These values can be determined using the equivalence point of the titration. At the equivalence point, the moles of acid and base are equal, resulting in a neutral pH. Using the balanced chemical equation of the reaction, the moles of hydrofluoric acid can be determined from its initial concentration and volume.
From there, the volume of base needed to reach the equivalence point can be calculated using its concentration and the calculated moles of acid.
Finally, using the pH values given, the volumes of base needed to reach those pH values can be determined by comparing the pH to the equivalence point pH and using stoichiometry to adjust the volume of base added accordingly.
To know more about equivalence point click on below link:
https://brainly.com/question/31375551#
#SPJ11
how does electron domain geometry differ from molecular geometry? briefly explain in your own words.
The key difference between electron domain geometry and molecular geometry is that the former takes into account all electron pairs, while the latter only considers the atoms in the molecule.
Electron domain geometry refers to the arrangement of electron pairs around the central atom of a molecule or ion, regardless of whether the electron pairs are bonding or nonbonding. On the other hand, molecular geometry refers to the spatial arrangement of only the atoms in a molecule or ion, and not the non-bonding electron pairs.
It takes into account all the electron pairs around the central atom, including lone pairs and bonding pairs. On the other hand, molecular geometry refers to the spatial arrangement of only the atoms in a molecule or ion, and not the non-bonding electron pairs.
To know more about electron domain geometry and molecular geometry here:
https://brainly.com/question/18612295#
#SPJ11
what is the net ionic equation (nie) when naoh is added to the h2a/kha buffer system?
The [tex]H_{2} A/KHA[/tex] buffer system consists of the weak acid [tex]H_{2} A[/tex] and its conjugate base KHA.
When NaOH is added to the buffer solution, it reacts with the weak acid to form water and the conjugate base KHA. The balanced chemical equation for this reaction is:
[tex]H_{2} A + OH^{-}[/tex] → [tex]KHA + H_{2} O[/tex]
To write the net ionic equation (NIE), we only include the species that undergo a chemical change in the reaction. The spectator ions (ions that do not change their oxidation state) are omitted from the equation. In this case, the NIE is:
[tex]H_{2} A + OH^{-}[/tex] → [tex]KHA + H_{2} O[/tex]
where [tex]OH^{-}[/tex] is the hydroxide ion obtained from the dissociation of NaOH.
Learn more about ionic equation
https://brainly.com/question/15466794
#SPJ4
Be sure to answer all parts. Draw Lewis structures, including all lone pair electrons, for the molecules below. Then, identify whether the central atom obeys the octet rule. Part 1 out of 2 BrF3 draw structureoctet rule: a. obeyed b. disobeyed
Since the central atom has 10 electron in outermost outermost shell which disobeyed the octet rule. octet rule -> disobeyed. and the diagram is attached below:
What is atom?Atom is a free and open source text editor created by the development team at Github. It is a modern and customizable cross-platform text editor that supports syntax highlighting, auto-completion, code folding and more. Atom is designed to be extremely user-friendly and to provide an environment for both novice and expert users. Atom also has a package manager that allows users to easily find and install packages that extend the functionality of the editor. Additionally, Atom has a vibrant community of developers and users that are continuously creating and updating packages for the editor. Atom is an excellent choice for writing code and text, as it provides an efficient, intuitive, and customizable environment.
To learn more about atom
https://brainly.com/question/25674345
#SPJ1
how many milliliters of concentrated hcl(aq) (36.0y mass; density = 1.18 g/ml) are required to produce 12.5 l of a solution with a ph = 2.10.
The volume in milliliters of concentrated HCl required to produce 12.5 L of a solution with a pH of 2.10 is 8.52 mL.
To determine the volume of concentrated HCl needed to produce 12.5 L of a pH = 2.10 solution, convert pH to H⁺ concentration, calculate the number of moles of H⁺ ions needed, and determine the concentration of concentrated HCl.:
1. Convert pH to H⁺ concentration: H⁺ concentration = 10^(-pH) = 10^(-2.10) = 0.00794 mol/L.
2. Calculate the moles of H⁺ ions needed: moles = H⁺ concentration × volume = 0.00794 mol/L × 12.5 L = 0.0993 mol.
3. Determine the concentration of concentrated HCl: mass = 36.0% × density = 0.36 × 1.18 g/mL = 0.425 g/mL. As HCl has a molar mass of 36.461 g/mol, the molar concentration is 0.425 g/mL / 36.461 g/mol = 0.01165 mol/mL.
4. Calculate the volume of concentrated HCl needed: volume = moles / concentration = 0.0993 mol / 0.01165 mol/mL = 8.52 mL.
Therefore, 8.52 mL of concentrated HCl(aq) (36.0% mass; density = 1.18 g/mL) are required to produce 12.5 L of a solution with a pH = 2.10.
Learn more about pH here: https://brainly.com/question/26424076
#SPJ11
The Ksp for barium chromate is 1.2×10−10. Will barium chromate precipitate upon mixing 10 mL of 1.0×10−5 M barium nitrate solution with 10 mL of 1.0×10−3 M potassium chromate solution?
Ag₂CrO₄ 2Ag + + CrO₄ 2 - [Ag +] = 2s, CrO₄ 2 is a form of silver chromate. Ag₂SO₄ has a solubility product of 7.0 105. 10 mL of a 0.010 M silver nitrate solution and 10 mL of a 0.020 M sodium solution are combined by a lab student.
Strontium chromate, with a Ksp of 3.6 10-5, and barium chromate, with a Ksp of 1.2 10-10, can both separate a combination of metal ions in a solution. Ksp = [Ba2+] = 1.1 x 10-10[SO4. 2-]. 1.1 x 10-10 = (x)(x). 1 x 10-5 M = x. BaSO4 dissolves in 1 x 10-5 moles/liter of water. Not so with barium sulphate. BaSO(4)'s ionic byproduct is 3.0xx10(-11). A saturated solution of one litre. If 5 is 1.05 x 10-5 moles, then.
To know more about silver nitrate, click here:
https://brainly.com/question/29627918
#SPJ4
Please help! The file is attached below.
Pressure and volume have an inverse relationship, which means that as pressure increases, volume decreases and vice versa. This relationship is described by Boyle's law, which states that at a constant temperature, the product of pressure and volume is a constant: P1V1 = P2V2.
How to explain the relationshipb. Pressure and the number of moles have a direct relationship, which means that as the number of moles increases, pressure also increases and vice versa. This relationship is described by the ideal gas law, which states that the pressure of a gas is proportional to the number of moles of the gas and the temperature of the gas, while inversely proportional to the volume of the gas: PV = nRT.
c. Pressure and temperature have a direct relationship, which means that as temperature increases, pressure also increases and vice versa. This relationship is described by the Gay-Lussac's law, which states that at a constant volume, the pressure of a gas is directly proportional to its temperature: P1/T1 = P2/T2. This law is applicable only for a fixed amount of gas or constant number of moles.
Learn more about pressure on
https://brainly.com/question/28012687
#SPJ1
explain the relationship between:
a. pressure and volume
b. pressure and number of moles
c. pressure and temperature
a substance has a vapor pressure of 28. torr at 22. oc. calculate its vapor pressure at 65 oc. δhvap = 23.0 kj/mol enter your answer as an integer.
We can use the Clausius-Clapeyron equation to relate the vapor pressures of a substance at two different temperatures:
ln(P2/P1) = -δHvap/R * (1/T2 - 1/T1)
where P1 and P2 are the vapor pressures at temperatures T1 and T2, respectively, δHvap is the heat of vaporization, R is the gas constant, and ln is the natural logarithm.
We can rearrange this equation to solve for P2:
P2 = P1 * exp[-δHvap/R * (1/T2 - 1/T1)]
Plugging in the values given in the problem, we get:
P1 = 28.0 torr
T1 = 22°C = 295 K
T2 = 65°C = 338 K
δHvap = 23.0 kJ/mol
R = 8.314 J/(mol*K)
[tex]P2 = 28.0 * exp[-23.010^3/(8.314338) * (1/338 - 1/295)][/tex]
P2 ≈ 131 torr
Therefore, the vapor pressure of the substance at 65°C is approximately 131 torr.
Learn more about Clausius-Clapeyron
https://brainly.com/question/29414397
#SPJ4
What is the role of the aniline in the synthesis of Vaska's complex?
Aniline plays a crucial role in the synthesis of Vaska's complex as it serves as a reducing agent to convert the palladium(II) chloride precursor to the desired palladium(II) complex.
Aniline reduces the palladium(II) chloride to palladium(0), which then coordinates with carbon monoxide and the other ligands to form Vaska's complex. This reaction is commonly referred to as the "Vaska's reaction" and is a widely used method for the synthesis of various palladium complexes.
The role of aniline in the synthesis of Vaska's complex is as a solvent and coordinating ligand. Aniline helps to dissolve the reactants and facilitate the formation of Vaska's complex, which is a transition metal carbonyl compound with the formula trans-IrCl(CO)(PPh3)2. During the synthesis, aniline coordinates with the metal center, and then it is replaced by the desired ligands to form the final Vaska's complex.
Visit here to learn more about Aniline:
brainly.com/question/31081529
#SPJ11
Half life period of first order reaction is 20 minutes. The amount of reactant left after one hour will be
After one hour the amount of reactant left of first order reaction has a half-life of 20 minutes:
For a first-order reaction, the amount of reactant remaining after a certain time can be calculated using the equation:
[tex]N(t) = N₀ * e^(-kt)[/tex] N(t) = N₀ * e^(-kt)
where N(t) is the amount of reactant remaining at time t, N₀ is the initial amount of reactant, k is the rate constant, and e is the mathematical constant approximately equal to 2.71828.
The half-life period of the reaction is given as 20 minutes. The half-life is the time taken for the concentration of the reactant to reduce to half of its initial value. Therefore, we can use the half-life to determine the rate constant as follows:
[tex]t(1/2) = (ln 2)/k20 minutes = (ln 2)/kk = (ln 2)/20k = 0.034657[/tex]
t(1/2) = (ln 2)/k
20 minutes = (ln 2)/k
k = (ln 2)/20
k = 0.034657
Using this rate constant, we can calculate the amount of reactant remaining after one hour (60 minutes):
[tex]N(60) = N₀ * e^(-kt)N(60) = N₀ * e^(-0.034657 * 60)N(60) = N₀ * e^(-2.07942)N(60) = 0.126 * N₀[/tex]
N(60) = N₀ * e^(-kt)
N(60) = N₀ * e^(-0.034657 * 60)
N(60) = N₀ * e^(-2.07942)
N(60) = 0.126 * N₀
Therefore, the amount of reactant remaining after one hour will be 0.126 times the initial amount of reactant.
To know more about half-life and first-order reaction:
https://brainly.com/question/14228544
https://brainly.com/question/14203005
a sample of n2 gas has a volume of 27.0 l at a pressure of 1.50 atm and a temperature of 23°c. what volume in liters, will the gas occupy at 3.50 atm and 266°c? assume ideal behavior. show your work.
Assuming ideal behavior, the volume the gas will occupy at 3.50 atm and 266°C is approximately 21.07 liters.
To solve this problem, we can use the combined gas law formula, which is (P₁V₁)/T₁ = (P₂V₂)/T₂, where P represents pressure, V represents volume, and T represents temperature in Kelvin.
First, we need to convert the given temperatures to Kelvin:
T₁ = 23°C + 273.15 = 296.15 K
T₂ = 266°C + 273.15 = 539.15 K
Now, we can plug the given values into the formula:
(1.50 atm * 27.0 L) / 296.15 K = (3.50 atm * V₂) / 539.15 K
Next, we'll solve for V₂:
V₂ = (1.50 atm * 27.0 L) * 539.15 K / (296.15 K *3.50 atm)
V₂ ≈ 21.07 L
So, the gas will occupy a volume of approximately 21.07 liters at 3.50 atm and 266°C, assuming ideal behavior.
Learn more about combined gas law here: https://brainly.com/question/29341891
#SPJ11
Use thermodynamic tables to determine the theoretical values of the thermodynamic parameters. The theoretical values of the thermodynamic parameters for dissolving of Ca(OH)2(s) in water are (show each calculation): ΔH° = _______________________ kJ/mol ΔS° = ______________________ J/mol-K
The theoretical values of the thermodynamic parameters for dissolving Ca(OH)₂(s) in water are: ΔH° = 20.4 kJ/mol and ΔS° = -222.7 J/mol-K.
How to find the thermodynamic values?The thermodynamic values for the dissolution of Ca(OH)₂(s) in water can be determined using the following equations:
ΔG° = ΔH° - TΔS°
ΔG° = -RTln(K)
where R is the gas constant (8.314 J/mol-K), T is the temperature in Kelvin, and K is the equilibrium constant for the reaction. At standard conditions (25°C or 298 K, 1 atm), the equilibrium constant for the reaction is 2.74x[tex]10^-^6[/tex].
Using the second equation and the given value of K, we can solve for ΔG°:
ΔG° = -RTln(K)
ΔG° = -(8.314 J/mol-K)(298 K)ln(2.74x[tex]10^-^6[/tex])
ΔG° = 68.2 kJ/mol
Now we can use the first equation to solve for ΔH° and ΔS°:
ΔG° = ΔH° - TΔS°
68.2 kJ/mol = ΔH° - (298 K)(ΔS°)
ΔH° = ΔS°(298 K) + 68.2 kJ/mol
To determine ΔS°, we can use the relationship between ΔG° and K:
ΔG° = -RTln(K)
ΔS° = -ΔG°/Tln(K)
Substituting the given values, we get:
ΔS° = -(68.2 kJ/mol)/(298 K)ln(2.74x[tex]10^-^6[/tex])
ΔS° = -222.7 J/mol-K
Therefore, the theoretical values of the thermodynamic parameters for the dissolution of Ca(OH)₂(s) in water are:
ΔH° = 20.4 kJ/mol
ΔS° = -222.7 J/mol-K
Learn more about Thermodynamic values
brainly.com/question/28441348
#SPJ11
For each of the following solutions, calculate the initial pH and the final pH after adding 0.010 mol of NaOH.
For 300.0mL of pure water, calculate the initial pH and the final pH after adding 0.010 mol of NaOH.
For 300.0mL of a buffer solution that is 0.240M in HCHO2 and 0.280M in KCHO2, calculate the initial pH and the final pHafter adding 0.010 mol of NaOH.
For 300.0mL of a buffer solution that is 0.305M in CH3CH2NH2 and 0.285M in CH3CH2NH3Cl, calculate the initial pHand the final pH after adding 0.010 mol of NaOH.
(a) Pure water has an initial pH of 7.00. moles NaOH = 0.010 [OH-] = 0.270 L = 0.037 M = - log pOH 0.037 = 1.43 pH = 14 - pOH = 14 - 1.43 Final pH is 12.57. (b) Ka = 1.8 x 10-4 pKa = 3.74 pH = 3.74 + log 0.285 / 0.215 = 3.86.
(b) clean water: Initial pH is 7.00. moles NaOH = 0.010 [OH-] = 0.270 L = 0.037 M = - log pOH 0.037 = 1.43 pH = 14 - pOH = 14 - 1.43 pH = 12.57.
(c) Acid buffer pH equals pKa plus (salt / acid).The Henderson-Hasselbalch equation, also referred to as the Henderson equation, is the equation at issue.
(d) As we predicted, the solution is acidic since its pH is 4.74. The following formula can be used to determine the buffer solution's acidic pH.
pH = pKa + log[salt][acid]
[salt]=50×0.175=0.067 M.
[acid]=25×0.275=0.067 M.
To know more about Henderson-Hasselbalch, click here:
https://brainly.com/question/13423434
#SPJ4
Part A
For the following systems at equilibrium
A:B:2NOCl(g)H2(g)+I2(g)??2NO(g)+Cl2(g)2HI(g)
classify these changes by their effect.
Drag the appropriate items to their respective bins.
a) system A - increase container size
b) system A - decrease container size
c) system B- increase container size
d) system B- decrease container size
a) System A - Increase container size
b) System B - Decrease container size
a) If the container size of system A is increased, it will lead to a decrease in the pressure inside the container. According to Le Chatelier's principle, the system will shift in the direction that minimizes the change in pressure, which in this case is towards the side with more moles of gas.
Since the forward reaction has 2 moles of gas on the left side (2NOCl) and the reverse reaction has 3 moles of gas on the right side (2NO + Cl2), the equilibrium will shift towards the left, favoring the formation of more NOCl.
b) If the container size of system B is decreased, it will result in an increase in pressure inside the container. According to Le Chatelier's principle, the system will shift in the direction that minimizes the change in pressure, which in this case is towards the side with fewer moles of gas.
Since the forward reaction has 3 moles of gas on the right side (2NO + Cl2) and the reverse reaction has 2 moles of gas on the left side (2NOCl), the equilibrium will shift towards the right, favoring the formation of more NO and Cl2.
For more questions like Reaction click the link below:
https://brainly.com/question/30086875
#SPJ11
Rank each of the following sets from the most reactive (#1) to the least reactive (#4) a) NHAc b) Cl Cl C) CH3 OCH3 CN CN CN CN
The reactivity of a molecule depends on various factors, such as the presence of functional groups, bond strengths, and electron distribution.
Based on these factors, the given sets can be ranked from the most reactive to the least reactive as follows:
[tex]Cl Cl[/tex]
[tex]CN CN CN CN[/tex]
[tex]NHA_{c}[/tex]
[tex]OCH_{3} CN CN CN CN[/tex]
The ranking from the most reactive (#1) to the least reactive (#4):
1)[tex]OCH_{3} CN CN CN CN[/tex] This group has electron-withdrawing cyano (CN) groups, which make the molecule highly reactive as it stabilizes negative charge in reactions.
2)[tex]NHA_{c}[/tex]: The presence of nitrogen makes this molecule moderately reactive, as it can participate in hydrogen bonding and other reactions.
3) Cl Cl: This group is moderately reactive, as the halogen atoms (Cl) can engage in reactions such as electrophilic aromatic substitution and nucleophilic substitution.
4) [tex]CH_{3}[/tex]: This is the least reactive group among the given options, as it is an alkyl group and does not have any strongly electron-donating or withdrawing properties.
To know more about nucleophilic substitution:
https://brainly.com/question/16172504
#SPJ11
The solid borax reagent is contaminated with a water-soluble substance that does not react with hydrochloric acid. As a result of this contamination, will Ksp of the borax be reported as too high, too low, or unaffected?
If the solid borax reagent is contaminated with a water-soluble substance that does not react with hydrochloric acid, the measured value of Ksp of borax will be reported as too high.
What is contamination?
Contamination refers to the presence of unwanted or harmful substances in a material or environment. It can occur in many different contexts, including in food and water, laboratory experiments, and manufacturing processes.
The reason for this is that the contaminating substance will dissolve in the water, increasing the total concentration of ions in the solution. This will cause the observed solubility of borax to be higher than it actually is, because the concentration of borax ions will be mixed with the concentration of ions from the contaminant. As a result, the measured value of Ksp will be too high because it is calculated using the observed solubility.
It's worth noting that this assumes the contaminating substance does not interact with borax in any way that could affect its solubility. If the contaminant does interact with borax, or if it interferes with the ability to measure the solubility accurately, the effect on the reported Ksp may be more complicated.
To know more about contamination, visit:
https://brainly.com/question/14703209
#SPJ1
Complete question is: The solid borax reagent is contaminated with a water-soluble substance that does not react with hydrochloric acid. As a result of this contamination, will Ksp of the borax be reported as too high.
what is the maximum amount of useful work that the reaction of 2.02 moles of h2o(l) is capable of producing in the surroundings under standard conditions? if no work can be done, enter none.
The maximum amount of useful work that the reaction of 2.02 moles of H2O(l) is capable of producing in the surroundings under standard conditions is none.
This is because the reaction of water under standard conditions is not spontaneous and requires an external source of energy to proceed. Therefore, no useful work can be obtained from this reaction under standard conditions. The maximum amount of useful work that the reaction of 2.02 moles of H2O(l) can produce in the surroundings under standard conditions can be calculated using Gibbs free energy change (ΔG) and the equation ΔG = -n * F * E°. However, since H2O(l) is in its stable liquid state and not undergoing any reaction, no work can be done. Therefore, the answer is none.
Learn more about H2O here: brainly.com/question/13278693
#SPJ11
11. explain the observed temperature change in terms of heat being lost or gained by the system or surroundings.
An observed temperature change in a system is explained by the transfer of heat between the system and its surroundings. When the system gains heat, the temperature increases, and the surroundings lose heat. Conversely, when the system loses heat, the temperature decreases, and the surroundings gain heat.
To explain the observed temperature change in terms of heat being lost or gained by the system or surroundings, let's first understand the terms involved:
1. System: The part of the universe being studied or observed, such as a chemical reaction, a container with a substance, etc.
2. Surroundings: Everything outside the system that can exchange energy with it.
3. Temperature change: The difference in temperature between the initial and final states of a system or surroundings.
Now, let's discuss heat transfer between the system and surroundings:
When the temperature of the system increases, it means the system has gained heat. This heat could be due to an exothermic reaction, external heating, or other factors. In this case, the surroundings are losing heat to the system.
On the other hand, when the temperature of the system decreases, it means the system is losing heat. This heat loss could be due to an endothermic reaction, cooling, or other factors. In this case, the surroundings are gaining heat from the system.
To know more about "Endothermic reaction" refer here:
https://brainly.com/question/2487822#
#SPJ11
δg°' for the formation of udp–glucose from glucose-1-phosphate and utp is about zero. yet the production of udp–glucose is highly favorable. what is the driving force for this reaction?
The driving force for the formation of UDP-glucose from glucose-1-phosphate and UTP is the hydrolysis of the pyrophosphate bond in the reaction.
Although the standard free energy change (ΔG°') for the reaction is close to zero, the hydrolysis of the pyrophosphate bond provides a large negative ΔG value, which makes the overall reaction highly favorable. This energy released during the hydrolysis of the pyrophosphate bond is used to drive the formation of the UDP-glucose. Therefore, the hydrolysis of the pyrophosphate bond acts as the driving force for the formation of UDP-glucose.
Learn more about UDP-glucose: https://brainly.com/question/14925272
#SPJ11
a syringe containing 1.51 mlml of oxygen gas is cooled from 90.0 ∘c∘c to 0.8 ∘c∘c . what is the final volume vfvf of oxygen gas? (assume that the pressure is constant.)
The first step to solving this problem is to use the ideal gas law, PV = nRT, where P is the pressure, V is the volume, n is the number of moles of gas, R is the universal gas constant, and T is the temperature in Kelvin.
Since the pressure is constant, we can rewrite the ideal gas law as V1/T1 = V2/T2, where V1 is the initial volume, T1 is the initial temperature, V2 is the final volume and T2 is the final temperature.
To solve for V2, we need to convert the temperatures to Kelvin, which is done by adding 273.15 to the Celsius temperature. Thus, the initial temperature is 363.15 K and the final temperature is 273.95 K.
We also need to find the number of moles of oxygen gas. To do this, we can use the equation n = PV/RT, where P is the pressure, V is the volume, R is the universal gas constant (8.31 J/mol.K), and T is the temperature in Kelvin. Since the pressure is not given, we can assume that it is constant and cancel it out.
n = (1.51 mL/1000 mL/L) / (8.31 J/mol.K x 363.15 K)
n = 5.96 x 10^-5 mol
Now we can solve for V2:
V1/T1 = V2/T2
1.51 mL/363.15 K = V2/273.95 K
V2 = 1.13 mL
Therefore, the final volume of oxygen gas is 1.13 mL.
Learn more about ideal gas law here:
https://brainly.com/question/4147359
#SPJ11
160.0 mL of 0.23 M HF with 225.0 mL of 0.31 M NaF
The Ka of hydrofluoric acid is 6.8 x 10−4.pH = ___
The pH of the hydrofluoric acid is 3.4451.
What is pH?
A pH is a quantitative measure of the acidity or basicity of aqueous solutions. The pH scale has a range of 0 to 14. A pH of 7 is considered neutral. A pH of less than 7 indicates acidity. A pH greater than 7 indicates that the solution is basic.
What is Ka?
Ka or acid dissociation constant (Ka) measures how much an acid dissociates in solution and hence its strength.
Given,
Ka of hydrofuoric acid= 6.8 × 10⁻⁴
To find pKa,
pKa= -log₁₀Ka
= -log 6.8×10⁻⁴
= 4 - 0.8325
= 3.1675
pH = pKa + log (A⁻)/(HA)
= 3.1675 + log (0.31×225)/(0.23×160)
= 3.1675 + log 1.895
= 3.1675 + 0.2776
= 3.4451
Therefore, the pH of hydrofluoric acid is 3.4451.
To learn more about pH, click here:
https://brainly.com/question/2288405
#SPJ12
determine if the ratio of the volume of titrant required to raise the ph of each buffer 1 unit (vb/va) is directly related to the ratio of the buffer concentrations (concentrationb/concentrationa)
The ratio of Vb/Va is directly related to the ratio of the buffer concentrations. A ratio is a mathematical comparison of two or more quantities, expressed as the quotient of one quantity divided by another.
To determine if the ratio of the volume of titrant required to raise the pH of each buffer 1 unit (Vb/Va) is directly related to the ratio of the buffer concentrations (Concentrationb/Concentrationa), you'll need to perform a titration experiment. In this experiment, you will carefully add a titrant to each buffer solution and measure the volume required to achieve a 1 unit increase in pH. Once you have the volumes of titrant for each buffer, calculate the ratio Vb/Va. Similarly, calculate the ratio of buffer concentrations, Concentrationb/Concentrationa. If these two ratios are equal or have a consistent relationship, it indicates that the volume of titrant required to raise the pH of each buffer is directly related to the ratio of the buffer concentrations.
Learn more about ratio here:
https://brainly.com/question/28300765
#SPJ11
the addition of fe(no3)3 can be used to detect what group? hcl triple bond phenol −oh
The addition of Fe(NO3)3 can be used to detect the presence of the phenol (-OH) group.
This is because Fe(NO3)3 can form a complex with the phenol group, resulting in a purple coloration. The other groups mentioned in the question, HCl and a triple bond, are not related to the detection of phenol.
The addition of Fe(NO3)3, or ferric nitrate, can be used to detect the presence of phenol groups in a compound. When Fe(NO3)3 is added to a solution containing a phenol, the hydroxyl group (-OH) in the phenol reacts with the ferric ions, forming a colored complex.
This reaction is specific to phenols and helps in identifying the presence of the phenolic group in the compound.
To learn more about phenol click here
brainly.com/question/30650792
#SPJ11
If the SQL WHERE clause specifies a primary key, then the query can return ____. Chose all that apply.
0 records
many records
this can't be done
1 record
If the SQL WHERE clause specifies a primary key, then the query can return only 1 record.
This is because the primary key uniquely identifies each record in a table, and therefore only one record can match the specified criteria.
It is not possible to return 0 records because a primary key guarantees the existence of at least one record. It is also not possible to return many records as primary keys are unique identifiers.
Therefore, when querying with a primary key in the WHERE clause, the result will always be limited to one record.
To know more about primary key click on below link:
https://brainly.com/question/13437797#
#SPJ11
Provide the major organic product which results when PhCHO is treated with the following sequence of reagents: 1) CH3CH2MgBr; 2). H3O+ ; 3). Na2Cr2O7, H2SO4
The major organic product formed when PhCHO is treated with the given sequence of reagents is PhCH(OH)CH₂CH₃.
To explain the reaction:
1. PhCHO reacts with CH₃CH₂MgBr (an organometallic Grignard reagent) through a nucleophilic addition, leading to the formation of a magnesium alkoxide intermediate.
2. This intermediate is then protonated by H₃O⁺ to form an alcohol, specifically PhCH(OH)CH₂CH₃.
3. However, the presence of Na₂Cr₂O₇ and H₂SO₄ in the final step indicates an oxidizing condition. Since the alcohol formed in step 2 is a secondary alcohol, it is not oxidized further under these conditions, and the final product remains PhCH(OH)CH₂CH₃.
To know more about Grignard reagent click on below link:
https://brainly.com/question/30144052#
#SPJ11
Draw the major organic product of the Claisen condensation of ethyl pentanoate in the presence of sodium ethoxide. - You do not have to consider stereochemistry. - Assume the reaction is carried out with an acidic work-up. - Do not draw organic or inorganic by-products.
The resulting beta-ketoester undergoes acid-catalyzed hydrolysis to give the final product, 3-oxoheptanoic acid.
What is the role of sodium ethoxide in the Claisen condensation reaction?The Claisen condensation reaction involves the formation of a carbon-carbon bond between two esters or one ester and a ketone.
In this case, ethyl pentanoate will react with sodium ethoxide to give a beta-ketoester intermediate, which will undergo acid-catalyzed hydrolysis to form the final product.
The major organic product of the Claisen condensation of ethyl pentanoate in the presence of sodium ethoxide and acidic work-up is:
The beta-ketoester intermediate is formed by the nucleophilic attack of the enolate ion of ethyl pentanoate on the carbonyl carbon of another molecule of ethyl pentanoate.
The resulting beta-ketoester undergoes acid-catalyzed hydrolysis to give the final product, 3-oxoheptanoic acid.
Learn more about hydrolysis
brainly.com/question/29439050
#SPJ11
Explain why each compound is aromatic, antiaromatic, or nonaromatic
(a) Isoxazole
(b) 1,3-thiazole
(c) Pyran
(d) Pyrylium ion
(e) γ - pyrone
(f) 1,2-Dihydropyridine
(g) Cytosine
(h)
(a)
Isoxazole
(Aromatic)
(b)
1,3-thiazole
(Aromatic)
(c)
Pyran
(Nonaromatic)
(d)
Pyrylium ion
(Aromatic)
(e)
γ - pyrone
(Aromatic)
(f)
1,2-Dihydropyridine
(Nonaromatic)
(g)
Cytosine
(Aromatic)
(h)
Antiaromatic
The compounds
Isoxazole, 1,3-thiazole, pyrylium, γ-pyrone and Cytosine is aromatic.
Pyran and 1,2-Dihydropyridine is nonaromatic
(a) Isoxazole is aromatic because it has a continuous conjugated system of p-orbitals, a planar ring structure, and obeys Hückel's rule (4n+2 π electrons, where n is an integer), with 6 π electrons.
(b) 1,3-thiazole is aromatic due to its continuous conjugated p-orbital system, planar structure, and following Hückel's rule with 6 π electrons.
(c) Pyran is nonaromatic because, while it has a conjugated system and planar structure, it does not follow Hückel's rule, possessing only 4 π electrons.
(d) The pyrylium ion is aromatic because it contains a continuous conjugated p-orbital system, has a planar ring structure, and obeys Hückel's rule with 6 π electrons.
(e) γ-pyrone is aromatic, as it has a continuous conjugated p-orbital system, a planar ring structure, and follows Hückel's rule with 6 π electrons.
(f) 1,2-Dihydropyridine is nonaromatic due to its lack of a continuous conjugated p-orbital system, disrupting the aromaticity.
(g) Cytosine is aromatic because it has a continuous conjugated system of p-orbitals, a planar ring structure, and obeys Hückel's rule with 10 π electrons.
(h) A compound is classified as antiaromatic when it has a continuous conjugated p-orbital system and a planar structure but does not follow Hückel's rule. Instead, it has 4n π electrons, making it energetically unstable compared to aromatic and nonaromatic compounds.
For more such questions on Compounds.
https://brainly.com/question/30630680#
#SPJ11
the solubility of ag3po4 is measured and found to be 1.93×10-3 g/l. use this information to calculate a ksp value for silver phosphate.
The solubility of ag3po4 is measured and found to be 1.93×10-3 g/l. The Ksp value for silver phosphate is approximately 1.21×10-20.
To calculate the Ksp value for silver phosphate (Ag3PO4), we use the equation:
Ag3PO4 ⇌ 3Ag+ + PO43-
Ksp = [Ag+]3[PO43-]
We know that the solubility of Ag3PO4 is 1.93×10-3 g/L. We can use this to calculate the concentration of Ag+ and PO43- ions in solution.
Ag3PO4 ⇌ 3Ag+ + PO43-
1.93×10-3 g/L = 3x [Ag+]
[Ag+] = 6.44×10-4 mol/L
1.93×10-3 g/L = [PO43-]
[PO43-] = 6.61×10-6 mol/L
Now we can substitute these values into the Ksp expression:
Ksp = [Ag+]3[PO43-]
Ksp = (6.44×10-4)3 (6.61×10-6)
Ksp = 1.43×10-17
Therefore, the Ksp value for silver phosphate is 1.43×10-17.
To calculate the Ksp value for silver phosphate (Ag3PO4) using the given solubility information (1.93×10-3 g/L), follow these steps:
1. Determine the molar mass of Ag3PO4: (3 × Ag) + P + (4 × O) = (3 × 107.87) + 30.97 + (4 × 16.00) = 418.57 g/mol.
2. Convert the solubility to moles per liter (mol/L): (1.93×10-3 g/L) / (418.57 g/mol) = 4.61×10-6 mol/L.
3. Write the dissociation equation for Ag3PO4: Ag3PO4(s) ↔ 3Ag+(aq) + PO4^(3-)(aq).
4. Determine the equilibrium concentrations: [Ag+] = 3 × (4.61×10-6 mol/L) = 1.38×10-5 mol/L and [PO4^(3-)] = 4.61×10-6 mol/L.
5. Calculate the Ksp value: Ksp = [Ag+]^3 × [PO4^(3-)] = (1.38×10-5)^3 × (4.61×10-6) ≈ 1.21×10-20.
Therefore, the Ksp value for silver phosphate is approximately 1.21×10-20.
To learn more about solubility, click here:
brainly.com/question/28170449
#SPJ11
The solubility of ag3po4 is measured and found to be 1.93×10-3 g/l. The Ksp value for silver phosphate is approximately 1.21×10-20.
To calculate the Ksp value for silver phosphate (Ag3PO4), we use the equation:
Ag3PO4 ⇌ 3Ag+ + PO43-
Ksp = [Ag+]3[PO43-]
We know that the solubility of Ag3PO4 is 1.93×10-3 g/L. We can use this to calculate the concentration of Ag+ and PO43- ions in solution.
Ag3PO4 ⇌ 3Ag+ + PO43-
1.93×10-3 g/L = 3x [Ag+]
[Ag+] = 6.44×10-4 mol/L
1.93×10-3 g/L = [PO43-]
[PO43-] = 6.61×10-6 mol/L
Now we can substitute these values into the Ksp expression:
Ksp = [Ag+]3[PO43-]
Ksp = (6.44×10-4)3 (6.61×10-6)
Ksp = 1.43×10-17
Therefore, the Ksp value for silver phosphate is 1.43×10-17.
To calculate the Ksp value for silver phosphate (Ag3PO4) using the given solubility information (1.93×10-3 g/L), follow these steps:
1. Determine the molar mass of Ag3PO4: (3 × Ag) + P + (4 × O) = (3 × 107.87) + 30.97 + (4 × 16.00) = 418.57 g/mol.
2. Convert the solubility to moles per liter (mol/L): (1.93×10-3 g/L) / (418.57 g/mol) = 4.61×10-6 mol/L.
3. Write the dissociation equation for Ag3PO4: Ag3PO4(s) ↔ 3Ag+(aq) + PO4^(3-)(aq).
4. Determine the equilibrium concentrations: [Ag+] = 3 × (4.61×10-6 mol/L) = 1.38×10-5 mol/L and [PO4^(3-)] = 4.61×10-6 mol/L.
5. Calculate the Ksp value: Ksp = [Ag+]^3 × [PO4^(3-)] = (1.38×10-5)^3 × (4.61×10-6) ≈ 1.21×10-20.
Therefore, the Ksp value for silver phosphate is approximately 1.21×10-20.
To learn more about solubility, click here:
brainly.com/question/28170449
#SPJ11
At what temperature would CO2 molecules have an rms speed equal to that of H2 molecules at 15°C?
At a temperature of -195.8°C, CO₂ molecules would have an rms speed equal to that of H₂ molecules at 15°C.
This is because the average kinetic energy of the molecules follows the relationship of K.E. = 3/2kT. Here, k is the Boltzmann constant and T is the temperature in Kelvin. Since the two molecules have different masses, the average kinetic energy of the two molecules at a given temperature will also differ.
Since the average kinetic energy of the molecules is directly proportional to the rms speed, the rms speed of the two molecules at a given temperature will also differ. To equate the rms speed of two molecules, the temperature must be adjusted. Thus, the temperature of -195.8°C is required to equalize the rms speed of CO₂ molecules with that of H₂ molecules at 15°C.
know more about Boltzmann constant here
https://brainly.com/question/30639301#
#SPJ11