Boron has five protons and six neutrons. What is the atomic mass of boron?

A. 11
B. 10
C. 12
D. 1

Electron configurations

Valence electrons are electrons used in forming bonds and are in the outer shell of an element.  

The bond that occurs can be either an ionic bond or a covalent bond  

Valence electron determination using electron configurations.  

The main group elements usually have valence electron configurations in the s and p subshells  

While the transition elements in the subshells (n-1) d  

Further explanation

The location of the elemental groups in the periodic system is determined by the number of valence electrons filling the last sub-shell  

The period of an element is determined from the valence shell (the biggest main quantum number (n) )

In an atom, there are levels of energy in the shell and subshell  

This energy level is expressed in the form of electron configurations.  

Writing electron configurations starts from the lowest to the highest sub-shell energy level. There are 4 sub-shells in the shell of an atom, namely s, p, d, and f. The maximum number of electrons for each subshell is  

s: 2 electrons  

p: 6 electrons  

d: 10 electrons and  

f: 14 electrons  

Charging electrons in the subshell uses the following sequence:  

1s², 2s², 2p⁶, 3s², 3p⁶, 4s², 3d¹⁰, 4p⁶, 5s², 4d¹⁰, 5p⁶, 6s², etc.  

Answer. First things first... Balance the Chemical Equation

2FeCl3 + 3(NH4)2CO3 ---------> 6NH4Cl + Fe2(CO3)3

Its balanced Now.

200g of FeCl3 ---Given this... We can get jts reacting Moles

Mole = Mass/Molar Mass

Molar Mass of FeCl3 = 56 + (35.5)x3=162.5gmol-¹

Mole=200/162.5 =1.231moles of FeCl3

From the equation of Reaction

When 2mole of FeCl3 reacts.... It produces 1mole of Iron III carbonate [Fe2(CO3)3]

Since Mole ratio of reaction between both is 2:1

Therefore When 1.231moles of FeCl3 react....

1.231/2 moles of Fe2(CO3)3 will be produced.

= 1.231/2 = 0.616moles.

0.616Moles of Fe2(CO3)3 will be produced

Recall MASS =MOLE X MOLAR MASS

MOLAR MASS OF FE2(CO3)3= 56(2) + (60)(3)=292gmol-¹

MASS = 0.616 x 292 =179.872g ~ 180g of Fe2(CO3)3 Will Be Produced.

OPTION A SEEMS TO BE THE CLOSEST. THAT SHOULD BE OUR ANSWER. I MAY HAVE MISSED IT A BIT BECAUSE OF SOME APPROXIMATIONS.

BYE!

Answer:

[tex]FeCl₃ + (NH₄)₂CO₃ → NH₄Cl + Fe₂(CO₃)₃[/tex]

first balance the chemical equation

first balance the chemical equation[tex]2FeCl₃ + 3(NH₄)₂CO₃ → 6NH₄Cl + Fe₂(CO₃)₃[/tex]

2FeCl₃=2*162=324g

6NH₄Cl=6*53.5=321g

324 g of FeCl₃ gives 321 g of NH₄Cl

200g of FeCl₃ gives 321/324*200=198.14 g of NH₄Cl

in nearest value it is 198g/mole

The number of grams of ammonium chloride (NH4Cl) that will be produced is C.198___ grams.

Answer:

[tex]m_{Al}=9.42gAl[/tex]

Explanation:

Hello there!

In this case, according to the given chemical reaction:

2 Al + 3 Cl2 --> 2 AlCl3

Whereas there is a 2:3 mole ratio of aluminum to chlorine; it will be possible for us to calculate the required grams of aluminum by using the equality 22.4 L = 1 mol, the aforementioned mole ratio and the atomic mass of aluminum (27.0 g/mol) to obtain:

[tex]m_{Al}=11.727LCl_2*\frac{1molCl_2}{22.4LCl_2}*\frac{2molAl}{3molCl_2} *\frac{27.0gAl}{1molAl} \\\\m_{Al}=9.42gAl[/tex]

Regards!

Answer:

40

Explanation:

because the atomic number is how many electrons

Answer:

7 is the mass number of li and 3 is the atomic number

a 3

b 7

c 3

d 4

Answer:

K = 0.0396

Explanation:

Based on the reaction:

A + 2B ⇄ 3C + 2D

Where equilibrium constant, K, is:

K = [C]³[D]² / [A] [B]²

The initial concentrations of A and B are:

[A]₀ = 0.050M * (45.0mL / 70.0mL) = 0.0321M

[B]₀ = 0.100M * (25.0mL / 70.0mL) = 0.0357M

As [C] = 0.0410M, the molar concentration of D is:

0.0410M * (2mol D / 3mol C) = 0.0273M = [D]

And the concentration of A and B that reacted was:

0.0410M * (2mol B / 3mol C) = 0.0273M B

0.0410M * (1mol A / 3mol C) = 0.0137M A

Equilibrium concentration B and A:

0.0357M - 0.0273M = 0.0084M = [B]

0.0321M - 0.0137M = 0.0184M = [A]

And K is:

K = [0.0410M]³[0.0273M]² / [0.0184M] [0.0084M]²

The question is incomplete. The complete question is :

C. Balance these fossil-fuel combustion reactions. (1 point)

C8H18(g) + 12.5O2(g) →    ____CO2(g) + 9H2O(g) + heat

CH4(g) + ____O2(g) →     ____CO2(g) + ____H2O(g) + heat

C3H8(g) + ____O2(g) →    ____CO2(g) + ____H2O(g) + heat

C6H6(g) + ____O2(g)  →   ____CO2(g) + ____H2O(g) + heat

Solution :

C8H18(g) + 12.5O2(g) →    __8__CO2(g) + 9H2O(g) + heat

When 1 part of octane reacts with 12.5 parts of oxygen, it gives 8 parts of carbon dioxide and 9 parts of water along with liberation of energy.

CH4(g) + __2__O2(g) →     __1__CO2(g) + __2__H2O(g) + heat

When 1 part of methane reacts with 2 parts of oxygen, it gives 1 part of carbon dioxide and 2 parts of water along with liberation of energy.

C3H8(g) + __5__O2(g) →    __3__CO2(g) + __4__H2O(g) + heat

When 1 part of propane reacts with 5 parts of oxygen, it gives 3 part of carbon dioxide and 4 parts of water along with liberation of energy.

C6H6(g) + __1/2__O2(g)  →   __6__CO2(g) + __3__H2O(g) + heat

When 1 part of propane reacts with 1/2 parts of oxygen, it gives 6 part of carbon dioxide and 3 parts of water along with liberation of energy.

Answer:

I think the answer would be A.

A solution is prepared by mixing 50.00 mL of 0.100 M HNO3 and 100.00 ml of 0.200 M Ca(NO3)2. The molarity of the nitrate ion in the final solution is 0.1667 M.

The amount of a substance in a specific volume of solution is known as its molarity (M). The number of moles of a solute per liter of a solution is known as molarity. The molar concentration of a solution is another name for molarity.

Molarity (M), which is determined by dividing the solute's mass in moles by the volume of the solution in liters, is the most widely used unit to express solution concentration: liters of solution/moles of solute equals M. One liter of a solution with a 1.00 molar concentration (1.00 M) contains 1.00 moles of solute.

50.0 mL x 0.100 M

= 5.00 millimoles of HNO3

=0.00500 moles

100.0 mL x 0.200 M

= 20.0 millimoles of HNO3

=0.0200 moles

The whole solution has a volume of 150.0 mL

= 50.0+100.0

= 150

The whole solution contains 25.0 millimoles of HNO3

= 5.00+20.0

= 25

millimoles / mL = Molarity

25.0 / 150.0

= 0.1667 M

moles / Liters = Molarity

0.0250 / 0.1500

= 0.1667 M

Thus, The molarity of the nitrate ion in the final solution is 0.1667 M.

To learn more about molarity, follow the link;

https://brainly.com/question/8732513

#SPJ2

Answer:

They are compounds.

Explanation:

..........

Answer:

compounds!!

Explanation:

...........

Answer:

2 mL.

Explanation:

From the question given above, the following data were obtained:

Volume of water = 8 mL

Volume of water + solid = 10 mL

Volume of solid =?

The volume of the solid can be obtained as follow:

Volume of solid = (Volume of water + solid) – (Volume of water)

Volume of solid = 10 – 8

Volume of solid = 2 mL

Therefore, the volume of the solid is 2 mL

Answer: There are 0.0637 moles present in 85.0 mL of 0.750 M KOH.

Explanation:

Given: Volume = 85.0 mL (1 mL = 0.001 L) = 0.085 L

Molarity = 0.750 M

It is known that molarity is the number of moles of solute present in liter of a solution.

Therefore, moles present in given solution are calculated as follows.

[tex]Molarity = \frac{moles}{Volume (in L)}\\0.750 M = \frac{moles}{0.085 L}\\moles = 0.0637 mol[/tex]

Thus, we can conclude that there are 0.0637 moles present in 85.0 mL of 0.750 M KOH.

Answer:buckled railroad tracks on a hot day

Explanation: i just did it

Answer:

Place a glass rod in the solution, if the crystallisation point has been reached, you should notice small crystals formed on it.

Answer: 63.96%.

Explanation:

In 111g of Calcium chloride, there is 40g of Calcium and 71g of Chlorine. Percentage Composition of Chlorine is 63.96%.

Hope This Helps!

Answer:

The particles begin to move faster as the gas is heated. Since the gas remains at a constant pressure and volume, the particles are not able to spread out, so they move around the container even faster.

Explanation:

its just what happens

When a. certain volume of gas is heated at constant pressure, the speed of motion of the gas increases with temperature increase.

Anontons law states that If the temperature is increased, the average speed and kinetic energy of the gas molecules increase. If the volume is held constant, the increased speed of the gas molecules results in more frequent and more forceful collisions with the walls of the container, therefore increasing the pressure.

Read more on Kinetic Molecular Theory:

https://brainly.com/question/2901837

#SPJ2

Answer:

The correct solution is "[tex]0.480 \ J/g^{\circ}C[/tex]".

Explanation:

Given:

q = 103 J

Mass,

m = 12.6 grams

Temperature,

[tex]T_1=22.4[/tex]

[tex]T_2=39.4[/tex]

[tex]\Delta T=T_2-T_1[/tex]

      [tex]=39.4-22.4[/tex]

      [tex]=17^{\circ}C[/tex]

Now,

⇒  [tex]C=\frac{q}{m\times \Delta T}[/tex]

⇒      [tex]=\frac{103}{12.6\times 17}[/tex]

⇒      [tex]=\frac{103}{214.2}[/tex]

⇒      [tex]=0.480 \ J/g^{\circ}C[/tex]

Answer:

more electron deficient

Explanation:

The nitro group is an electron withdrawing group. It withdraws electrons from the pyridine ring by resonance.

This electron withdrawal by resonance makes the pyridine ring less electron rich or more electron deficient.

Hence, the nitro group makes the pyrinde ring more electron deficient

Answer:

It's 23.14 percent

Explanation:

First, the mass of all the elements are:

N = 14

O = 16

Fe = 56

In this molecule you have 3 atoms of N, and 9 atoms of O, so:

3•14 = 42

16•9 = 144

The whole mass of the molecule is:

56 + 42 + 144 = 242

242/100 = 2.42, so 1% is 2.42

56/2.42 = 23.14%

Peptide is the name of the molecule formed when two amino acids join together. Therefore, the correct option is option A.

Short strands of amino acids connected by peptide bonds are called peptidides. A polypeptide is a peptide chain that is longer, continuous, and unbranched. Proteins are polypeptides with a molecular weight of 10,000 Dalton or higher. Oligopeptides, which comprise dipeptides, tripeptides, and tetrapeptides, are chains of fewer than twenty amino acids.

Peptides, along with nucleic acids, oligosaccharides, carbohydrates, and others, belong to the vast chemical families of biological polymers or oligomers. Proteins are made up of one or even more polypeptides structured in a biologically useful manner. They are frequently coupled to other proteins, other macromolecules like DNA or RNA, or ligands like coenzymes and cofactors. Peptide is the name of the molecule formed when two amino acids join together.

Therefore, the correct option is option A.

To know more about peptide, here:

https://brainly.com/question/14351838

#SPJ7

Answer:

The balanced equation will be your greatest asset in Solving this.

The Balanced Equation is

3Cl2 + 8NH3---> N2 + 6NH4Cl

So

From this reaction...

3 moles of NH3 is required to produce 6 moles of NH4Cl

Now the question asked.... How Many Moles of NH3 will be needed to produce 12moles of NH4Cl?...

The answer is simply 6moles of NH3.

Why?

Since 3moles of NH3 produce 6 moles of NH4Cl

It makes sense that

6moles of NH3 will produce 12moles of NH4Cl.

Its a simple Ratio.

Hope this helps...

I'm Open to questions if you have any.

Have a great Day!

Answer:

d

Explanation:did test

Answer:

The solution with [OH-] = 3.2x10-3 M will have an [H+] of 3.09x10–12 M.Explanation:

Answer:

I say the correct answers are primary and secondary and teriary.

Explanation:

I say you are right!!

Answer:

Volume = 4614 m³

Explanation:

The volume of a pyramide is given by the following formula:

We are already given all the required information to calculate the volume by inputting the data:

The pyramid's volume is 4614 cubic meters.

Answer:

1. Kc = [NO]⁴ [H₂O]⁶ / [NH₃]⁴ [O₂]⁵

2. Kc = [I₂]²

3. Kc = 1/[NH₃] [HCl]

Explanation:

The equilibrium constant (Kc) is equal to the product of the concentrations of the products raised to their stoichiometric coefficients divided by the product of the concentrations of the reactant raised to their stoichiometric coefficients. It only includes gases and aqueous species.

1. 4 NH₃(g) + 5 O₂(g) ↔ 4 NO(g) + 6 H₂O(g)

Kc = [NO]⁴ [H₂O]⁶ / [NH₃]⁴ [O₂]⁵

2. ZrI₄(s) ↔ Zr(s) + 2 I₂(g)

Kc = [I₂]²

3. NH₃(g) + HCl(g) ↔ NH₄Cl(s)

Kc = 1/[NH₃] [HCl]

Answer:

c. The N2 molecules collide more frequently with the walls of the flask than do the Ar atoms.

Explanation:

The statements are:

a. There are more molecules of N2 present than atoms of Ar. FALSE. Because 1 mol of molecules of N2 = 28g and 1 mol of molecules of Ar = 40g. As there are equal MASSES, you will have more molecules of N2 than Ar molecules

b. The pressure is greater in the Ar flask. FALSE

Because pressure is directly proportional to amount of molecules. As molecules N2 > Molecules Ar. The pressure is greater in N2 flask

c. The N2 molecules collide more frequently with the walls of the flask than do the Ar atoms. TRUE

The collision probability of N2 is higher because there are more molecules presents

Answer:A

Explanation:

1. [tex]^{222}Rn_{86}[/tex] → [tex]^{218}Po_{84} + ^{4}He_{2}[/tex]

What is a spontaneous decay?

Learn more:

brainly.com/question/1898040