Block 1, of mass m1
m
1
= 0.500 kg
k
g
, is connected over an ideal (massless and frictionless) pulley to block 2, of mass m2
m
2
, as shown. For an angle of θ
θ
= 30.0 ∘
∘
and a coefficient of kinetic friction between block 2 and the plane of μ
μ
= 0.400, an acceleration of magnitude a
a
= 0.450 m/s2
m
/
s
2
is observed for block 2.
Find the mass of block 2, m2
m
2
.

The process of charging an object without touching it is called induction charging.

The process of charging a sphere by touching it with a charged rod is called charging by conduction..

When an uncharged object brings into the contact of the charged object but not touching the object directly, the uncharged object gets charged. This process of charging is called Induction Charging.

When an uncharged object brings in to the contact of the charged object by touching it directly, the uncharged object gets charged, This process of charging is called Conduction Charging.

When a charged rod touches the metal sphere, sphere gets same charged as the rod. The process of charging a sphere by touching it with a charged rod. is called conduction charging.

For more details about the conduction and induction charging, follow the link given below.

https://brainly.com/question/13599143.

Answer:

induction and conduction or 3,2 or c and b

Explanation:

edge 2022

The total momentum of the system is conserved and the momentum did not change.

The given parameters:

The initial momentum of the system is calculated as follows;

[tex]P_i = m_1 u_1 + m_2 u_2\\\\P_i = 0.17 \times 4 \ + \ 0.16(0)\\\\P_i = 0.68 \ kg m/s[/tex]

The final momentum of the system is calculated as follows;

[tex]P_f = m_1 v_1 + m_2 v_2 \\\\P_f = 0.17 (0) \ + 0.16(4.25)\\\\P_f = 0.68 \ kg m/s[/tex]

Thus, the total momentum of the system is conserved and the momentum did not change.

Learn more about conservation linear momentum here: https://brainly.com/question/7538238

When the speed of a car increases by a factor of 50%, the minimum braking distance will also be increased by a factor.

Braking distance will increase by a factor  2.25

Solution

From Newton's equation of motion, we can say that;

v² = u² + 2as

Where initial velocity is zero, we have;

v² = 2as

s = v²/2a

s is the distance and v is the final speed.

50% increase in speed means it has increased by a factor of 1.50

Hence we have

1.50²v² is directly proportional to the 1.50²d

Distance = 1.50²v² = 2.25d

Hence, breaking distance will increase by a factor 3.0625

Learn more about speed and distance:

https://brainly.com/question/26046491

Answer:it was lifted

Explanation:

by me lifting it because i can life it very high

Answer:

Variable- not consistent or having a fixed pattern; liable to change

Data- facts and statistics collected together for reference or analysis

Control- a group or individual used as a standard of comparison for checking the results of a survey or experiment

Technology- the application of scientific knowledge for practical purposes, especially in industry

Hypothesis- a supposition or proposed explanation made on the basis of limited evidence as a starting point for further investigation

Physical Science- the sciences concerned with the study of inanimate natural objects, including physics, chemistry, astronomy, and related subjects

Experiments- a scientific procedure to make a discovery, test a hypothesis, or demonstrate a known fact

Explanation:

The new gravitational force of the two objects will be 432 N.

The given parameters:

The gravitational force between the two objects is calculated by applying Newton's law of universal gravitation;

[tex]F = \frac{Gm_1m_2}{r^2} \\\\G = \frac{Fr^2}{m_1m_2}\\\\G = \frac{Gm_1m_2}{r^2} \\\\G = \frac{18r^2}{m_1m_2}[/tex]

[tex]\frac{18r^2}{m_1 m_2 } = \frac{F_2(\frac{1}{2}r)^2 }{2m_1 \times 3m_2} \\\\\frac{18r^2}{m_1 m_2 } = \frac{F_2 \times r^2}{4 \times 2m_1 \times 3m_2} \\\\\frac{18r^2\times 4 \times 2m_1 \times 3m_2}{m_1 m_2\times r^2 } = F_2\\\\432 \ N = F_2[/tex]

Thus, the new gravitational force of the two objects will be 432 N.

Learn more about Newton's law of universal gravitation here: https://brainly.com/question/9373839

Answer:

true

Explanation:

negative positive horizontal vertical gravity, friction and more

Answer:

25.48

Explanation:

Answer:

0.784m

Explanation:

This is a projectile motion problem so we analyze the horizontal and vertical motions separately. Since the question is asking for the height of the desk, it shows we need to analyze the vertical motion.

Gravitational force is responsible for how magma flows and rocks stack up on top of one another.

Hence, it is the gravitational force that is responsible for how magma flows and rocks stack up on top of one another.

Learn more about gravitational force: https://brainly.com/question/24783651

Answer:

5m/s

Explanation:

equation for momentum is mass times velocity

25 x 5 = 125

Answer:

We know that ΔK = Kf - Ki = 1/2 m Vf^2 - 1/2 m Vi^2 = 1/2m(Vf^2-Vi^2) = 1/2 m ΔV^2.

The mass remains the same, just calculate the difference of squared velocities and multiply it by half of the mass.

Answer:

the answer is 69.7687j

Explanation:

W =F sin Φ

Answer:

18:equilibrium

19:10.8

20:separating the surfaces with a layer of air

21:it remains motionless

22:cm/s

The specific heat capacity of tungsten given the data from the question is 0.17 J/gºC

Mass of tungsten (M) = 100 g

Temperature of tungsten (T) = 100 °C

Mass of water (Mᵥᵥ) = 200 g

Temperature warm water (Tᵥᵥ) = 20 °C

Specific heat capacity of the water (Cᵥᵥ) = 4.184 J/gºC

Equilibrium temperature (Tₑ) = 21.6 °C

Specific heat capacity of tungsten (C) = ?

Heat loss = Heat gain

MC(T – Tₑ) = MᵥᵥCᵥᵥ(Tₑ – Tᵥᵥ)

100 × C × (100 – 21.6) = 200 × 4.184(21.6 – 20)

100 × C × 78.4 = 1338.88

Divide both sides by 100 × 78.4

C = 1338.88 / (100 × 78.4 )

C = 0.17 J/gºC

Learn more about heat transfer:

brainly.com/question/6363778

#SPJ2

Answer:

hi there !

1 hour -------> 620 miles

3 1/2 ---------> ?

the number of miles the airplane travels in 3 1/2 hours

= 3 1/2 × 620 = "2170" miles

Answer:

A.synrhesis reaction

#carryonlearning

Answer:

A dependent variable is a variable that is tested in an experiment. An independent variable is that can be modified. Depending on what you are testing, the dependent variable will change accordingly to the dependent variable.

- I'm reading this back and it doesn't make much sense, if you want me to reword this I can

Answer:

D

Explanation:

Answer:

[tex]{ \rm{F=ma}} \\ [/tex]

Explanation:

Answer:

Please thank, answer below

Explanation:

Acceleration = (Final velocity - starting velocity)/time

Or, Force = mass * accelartion, which can be rewritten to be Accelaration = Force/mass

Answer:

6736 J

Explanation:

Knowing that Q = cmΔT:

Q = 4.184 J/(g·°C) · 28.6g · (78.3 °C - 22.0 °C) = 6736 J.

Answer:

This is the answer that I got.

Explanation:

Hope it is right.

The wavelength is 2m.

Hence, Option c) 2m is the correct answer

Given that;

Frequency; [tex]f = 30Hz[/tex]

Speed; [tex]v = 60m/s[/tex]

Wavelength; [tex]\lambda =\ ?[/tex]

using the expression for the relations between wavelength, frequency and speed of wave:

[tex]\lambda = \frac{v}{f}[/tex]

Where [tex]\lambda[/tex] is wavelength, f is frequency and v is speed.

We substitute our given values into the equation

[tex]\lambda = \frac{60m/s}{30Hz}\\\\\lambda = \frac{60m/s}{30s^{-1}}\\\\\lambda = 2m[/tex]

The wavelength is 2m.

Hence, Option c) 2m is the correct answer.

To learn more about wavelength, click here: https://brainly.com/question/1347107

The frequency of the moving wave is 30 Hz and if it is moving at the speed of 60 m/s then the wavelength will be equal to 2 m.

The distance between two identical locations (adjacent crests) in successive cycles is known as the wavelength, and it is used to describe waveform signals that are transmitted over wires or into space. Typically, in wireless systems, this length is specified in meters (m), centimeters (cm), or millimeters (mm).

The wavelength is more frequently described in nanometers (nm), which are units of 10⁻⁹ m, or angstroms, which are units of 10⁻¹⁰ m, for infrared (IR), visible light (UV), and gamma radiation.

As per the provided given data in the question,

Frequency, f = 30 Hz

Speed, v = 60 m/s

Then, the wavelength of the moving wave will be,

λ = v/f

= 60/30

λ = 2 meters.

Therefore, the wavelength will be 2 meters.

To know more about Wavelength:

https://brainly.com/question/13533093

#SPJ2

Answer:

Let L be the length of the wire.

N λ = M L      where N is the number of wavelengths λ. Also, M and are integers and L is the length of the wire

There must be nodes at the ends of the wire and anti-nodes at the points of zero displacement - λ/2, λ, 3λ/ 2, etc.

The simplest would be 2 λ = L   or L = λ / 2

In such a situation one would have

N-A-N    or node-antinode-node

There is a 180 degree phase change upon reflection of the wave creating the standing wave

The distance between nodes or anti-nodes must be λ/2 and there must  be nodes at the ends of the wire

Answer:

TRUE !!

Explanation:

An atom is the smallest particle of an element

Answer:

Explanation:

The work done by an object can be found by using the formula

workdone = force × distance

From the question we have

workdone = 30 × 0.5 = 15

We have the final answer as

Hope this helps you

The amount of work done by Pravat if he exerts a force of 30 N to lift a bag of groceries 0.5m is 15J.

The work done by a body can be calculated by multiplying the force exerted by the distance moved. That is;

Work done = force (F) × distance (m)

According to this question, Pravat exerts a force of 30N to lift a bag of groceries 0.5 m. The work done is calculated as follows:

Work done = 30N × 0.5m

Work done = 15J

Therefore, the amount of work done by Pravat if he exerts a force of 30 N to lift a bag of groceries 0.5m is 15J.

Learn more about work done at: https://brainly.com/question/8119756?referrer=searchResults