Your lawsone will be in the upper, aqueous layer during the 0.1 M NaOH extraction process.
Liquid-liquid extraction is a technique used to separate components in a mixture based on their relative solubilities in two immiscible liquids, typically an organic solvent and an aqueous solvent. When the 0.1 M NaOH is added, it forms an aqueous layer that mixes with the pigments and lawsone.
Lawsone, being an organic compound, will preferentially dissolve in the aqueous NaOH layer due to the formation of a soluble ion when it reacts with the base.
As a result, the lawsone will be found in the upper, aqueous layer while other pigments and compounds that are not soluble in the aqueous layer will remain in the lower, organic layer. This separation allows for the isolation of lawsone from the other pigments before running the column.
To know more about Liquid-liquid extraction click on below link:
https://brainly.com/question/13345735#
#SPJ11
the central atom in xef2 ion has [ select ] bonding groups of electrons and [ select ] lone pairs of electrons. the electron geometry of the molecule [ select ] , and the molecular geometry is
The central atom in XeF2 ion has two bonding groups of electrons and three lone pairs of electrons. The electron geometry of the molecule is trigonal bipyramidal.
This means that the total number of electron groups around the central atom is five. The electron geometry of the molecule is trigonal bipyramidal because the five electron groups are arranged in a way that maximizes the distance between them. The two bonding pairs are located in the equatorial plane, while the three lone pairs are located in the axial positions.
The molecular geometry of XeF2 is linear because the two bonding pairs repel each other and move away from each other to the maximum distance possible, creating a straight line. The three lone pairs occupy the equatorial plane, but they do not affect the molecular geometry because they are not involved in bonding.
In summary, XeF2 has a trigonal bipyramidal electron geometry due to the presence of five electron groups around the central atom, and a linear molecular geometry due to the repulsion between the two bonding pairs. The three lone pairs occupy the equatorial plane but do not affect the molecular geometry.
For more about trigonal bipyramidal:
https://brainly.com/question/30185738
#SPJ11
A volume of 500.0 mL500.0 mL of 0.170 M0.170 M NaOHNaOH is added to 615 mL615 mL of 0.250 M0.250 M weak acid (Ka=8.93×10−5).(Ka=8.93×10−5). What is the pHpH of the resulting buffer?
HA(aq)+OH−(aq)⟶H2O(l)+A−(aq)
To solve this problem, we can use the Henderson-Hasselbalch equation, which relates the pH of a buffer solution to the pKa and the ratio of the concentrations of the conjugate acid [tex]pH = pKa + log([A-]/[HA])[/tex]. he pH of the resulting buffer is 4.90
First, we need to determine the concentrations of the weak acid (HA) and its conjugate base (A-) after mixing with NaOH. This is a neutralization reaction, and the number of moles of NaOH added is equal to the number of moles of H+ in the weak acid: moles H+ = (0.615 L)(0.250 mol/L) = 0.154 mol H+
To neutralize this amount of H+, we need the same amount of OH-, which can be calculated using the concentration and volume of the NaOH solution: moles OH- = (0.500 L)(0.170 mol/L) = 0.085 mol OH-
The concentration of the weak acid and its conjugate base can be calculated using the volumes of the solutions and the moles of each species: [HA] = moles HA / total volume = 0.109 mol / (0.615 L + 0.500 L) = 0.107 M
[A-] = moles A- / total volume = 0.085 mol / (0.615 L + 0.500 L) = 0.083 M Now we can use the Henderson-Hasselbalch equation to find the pH of the buffer: [tex]pH = pKa + log([A-]/[HA])[/tex]
[tex]pH = -log(8.93×10^-5) + log(0.083/0.107)[/tex]
pH = 4.90
Therefore, the pH of the resulting buffer is 4.90
Know more about conjugate acid here:
https://brainly.com/question/31229565
#SPJ11
what is the ph of a saturated solution of ni(oh)2? ni(oh)2 has ksp = 2.0 x 10^–15A) 4.80 B) 8.90C) 5.10 D) 9.20 E) 7.00
To determine the pH of a saturated solution of Ni(OH)2 with a Ksp of 2.0 x 10^-15, we'll follow these steps:
1. Write the dissociation equation for Ni(OH)2: Ni(OH)2(s) ⇌ Ni2+(aq) + 2OH-(aq)
2. Set up the expression for Ksp: Ksp = [Ni2+][OH-]^2
3. Let x be the concentration of Ni2+ and 2x be the concentration of OH-. Then, Ksp = (x)(2x)^2.
4. Plug in the given Ksp value and solve for x: 2.0 x 10^-15 = x(2x)^2.
5. Calculate the concentration of OH- ions (2x).
6. Use the OH- concentration to find the pOH using the formula: pOH = -log[OH-].
7. Convert pOH to pH using the relationship: pH + pOH = 14.
So, the pH of the saturated solution of Ni(OH)2 is approximately 9.20 (Option D).
for more questions on pH of saturated solution: https://brainly.com/question/31325727
#SPJ11
To determine the pH of a saturated solution of Ni(OH)2 with a Ksp of 2.0 x 10^-15, we'll follow these steps:
1. Write the dissociation equation for Ni(OH)2: Ni(OH)2(s) ⇌ Ni2+(aq) + 2OH-(aq)
2. Set up the expression for Ksp: Ksp = [Ni2+][OH-]^2
3. Let x be the concentration of Ni2+ and 2x be the concentration of OH-. Then, Ksp = (x)(2x)^2.
4. Plug in the given Ksp value and solve for x: 2.0 x 10^-15 = x(2x)^2.
5. Calculate the concentration of OH- ions (2x).
6. Use the OH- concentration to find the pOH using the formula: pOH = -log[OH-].
7. Convert pOH to pH using the relationship: pH + pOH = 14.
So, the pH of the saturated solution of Ni(OH)2 is approximately 9.20 (Option D).
for more questions on pH of saturated solution: https://brainly.com/question/31325727
#SPJ11
Buchner Use an online MSDS source for this question. What is the formula weight of alum, KAl(SO4)2-12 H2O? Enter your answer to three sig figs. Chemicals Name/ Your Answer: KOH Answer units A 0.4754 g sample of aluminum reacts according to our experiment to produce alum. 5.3287 g of dried alum crystals are recovered. What is the percent yield of the experiment? Your Answer: Answer units
percent yield = 2337%. The formula weight of alum, KAl(SO4)2·12H2O can be calculated by adding the atomic weights of all the elements present in the compound.
Here's the calculation:
K = 39.098 g/mol
Al = 26.982 g/mol
S = 32.065 g/mol (x 2 = 64.130)
O = 16.00 g/mol (x 12 = 192.00)
H = 1.008 g/mol (x 24 = 24.192)
Formula weight of alum = 39.098 + 26.982 + 64.130 + 192.00 + 24.192 = 346.402 g/mol
For the per cent yield, we'll first determine the theoretical yield of alum:
0.4754 g Al × (1 mol Al / 26.982 g Al) × (1 mol alum / 1 mol Al) × (346.402 g alum / 1 mol alum) = 6.0961 g alum (theoretical yield)
Now, we can calculate the per cent yield using the recovered alum mass:
Per cent Yield = (Recovered Alum Mass / Theoretical Yield) × 100
Percent Yield = (5.3287 g / 6.0961 g) × 100 = 87.4%
So, the per cent yield of the experiment is 87.4%.
The formula weight of alum, KAl(SO4)2-12H2O, is 474.39 g/mol (according to the MSDS source).
To calculate the per cent yield of the experiment, we need to use the following formula:
percent yield = (actual yield / theoretical yield) x 100%
The theoretical yield is the amount of alum that should be produced based on the amount of aluminium used in the experiment. We can calculate the theoretical yield using stoichiometry:
2 Al + K2SO4 + 2 H2SO4 + 24 H2O → KAl(SO4)2-12H2O + 3 H2
From this equation, we can see that 2 moles of aluminium react to produce 1 mole of alum. Therefore, the theoretical yield of alum is:
theoretical yield = (5.3287 g / 474.39 g/mol) x (2 mol Al / 1 mol alum) x (26.98 g/mol Al) = 0.2277 g
Now we can calculate the per cent yield:
percent yield = (5.3287 g / 0.2277 g) x 100% = 2337%
This is an unrealistic per cent yield, likely due to an error in measurement or calculation. It is important to always check and double-check calculations to ensure accuracy in experimental results.
Learn more about atomic weights here: brainly.com/question/13000210
#SPJ11
the ph of a 0.02 m solution of an unknown weak acid is 8.1. what is the pka of this acid
The pKa of the unknown weak acid is 5.8.
To find the pKa of the unknown weak acid, we need to use the Henderson-Hasselbalch equation:
pKa = pH + log([A-]/[HA])
Where [A-] is the concentration of the conjugate base and [HA] is the concentration of the acid.
Since the solution is weak, we can assume that the majority of the acid has not dissociated and that [HA] ≈ [H+] ≈ 10^-8.1.
The concentration of the conjugate base [A-] can be calculated using the acid dissociation constant (Ka):
Ka = [H+][A-]/[HA]
Therefore, [A-] = Ka/[H+] = 10^-14/Ka
Substituting these values into the Henderson-Hasselbalch equation:
pKa = 8.1 + log(10^-14/Ka / 10^-8.1)
pKa = 8.1 - log(Ka) + log(10^6.9)
pKa = 14 - 8.1 + log(10^6.9) = 5.8
Therefore, the pKa of the unknown weak acid is 5.8.
Learn more about acid here:
https://brainly.com/question/14072179
#SPJ11
what is the purpose of each reagent in the experiment? group of answer choices acetanilide [ choose ] sodium bromide [ choose ] sodium hypochlorite [ choose ] acetic acid [ choose ] ethanol [ choose ]
The purpose of each reagent can vary widely depending on the context of the experiment.
What will be the purpose of each reagent?Without knowing the specific experiment being referred to, it is difficult to provide a definitive answer. However, here are some common uses for each of the reagents mentioned:
Acetanilide: a white solid used as a precursor in the synthesis of many pharmaceuticals and dyes
Sodium bromide: a salt that can be used as a sedative, anticonvulsant, or to prepare other bromine compounds
Sodium hypochlorite: a bleaching agent and disinfectant commonly used in household cleaning products
Acetic acid: a weak organic acid commonly used in food and beverage production, as well as in the manufacture of textiles, plastics, and other chemicals
Ethanol: a colorless, flammable liquid commonly used as a fuel, solvent, and in the manufacture of personal care products and pharmaceuticals.
Learn more about reagent.
brainly.com/question/31228572
#SPJ11
Calculate the freezing point of a 2.2 m aqueous sucrose solution. (Assume that Kf for water is 1.86∘C/m.)Express the temperature to two significant figures and include the appropriate units.freezing point = _____
The freezing point is -4.1°C.
To calculate the freezing point of a 2.2 m aqueous sucrose solution, you can use the formula:
ΔTf = Kf × m
where ΔTf is the change in freezing point, Kf is the molal freezing-point depression constant for water (1.86°C/m), and m is the molality of the solution (2.2 m).
ΔTf = 1.86°C/m × 2.2 m = 4.092°C
Since the normal freezing point of water is 0°C, the new freezing point will be:
Freezing point = 0°C - 4.092°C = -4.092°C
Expressed to two significant figures and with appropriate units, the freezing point is -4.1°C.
Know more about Freezing Point here:
https://brainly.com/question/40140
#SPJ11
iron (as fe2 ) is a) toxic at all concentrations. b) safe at all concentrations. c) toxic at high concentrations, essential at low concentration. d) toxic at high concentration, not known to be essential
Iron (as Fe²⁺) is toxic at high concentrations and essential at low concentrations.
Iron is an essential micronutrient required for many biological processes, such as oxygen transport, energy production, and DNA synthesis. However, excessive iron accumulation can cause oxidative stress and damage to cells, leading to various diseases, iron can become toxic, leading to a condition called iron overload. Therefore, maintaining a balance of iron is crucial for health. Iron toxicity can occur at high concentrations and can lead to symptoms such as abdominal pain, vomiting, and even death.
However, at low concentrations, iron is essential for normal physiological functioning. For example, iron deficiency can lead to anemia and impaired cognitive function. Therefore, it is important to ensure adequate iron intake, but also to avoid excessive iron consumption.
Learn more about anemia here:
https://brainly.com/question/29423004
#SPJ11
If you added 5.0 mL of 2.0M NaOH to 45.0 mL of pure water what would the resulting ApH of the solution be? (Hint: Kw =[H30+][OH]) 5
6.30 7 14
The resulting pH of the solution would be 14, as the addition of 5.0 mL of 2.0M NaOH to 45.0 mL of water completely dissociates into OH- ions, resulting in a concentration of 2.0M OH- ions.
When 5.0 mL of 2.0 M NaOH is added to 45.0 mL of pure water, the resulting solution will have a diluted concentration of NaOH. To find the new concentration, use the formula:
C1V1 = C2V2
Where C1 and V1 are the initial concentration and volume of NaOH, and C2 and V2 are the final concentration and volume of the solution. In this case:
(2.0 M)(5.0 mL) = C2(50.0 mL)
C2 = 0.2 M NaOH
Since NaOH is a strong base, it dissociates completely in water, resulting in an equal concentration of OH- ions. So, [OH-] = 0.2 M.
Next, use the ion product of water (Kw) to find the concentration of H3O+ ions. Kw = [H3O+][OH-] = 1.0 x 10^(-14) at 25°C.
[H3O+] = Kw / [OH-] = (1.0 x 10^(-14)) / (0.2) = 5.0 x 10^(-14) M
Finally, to find the pH of the solution, use the formula:
pH = -log[H3O+]
pH = -log(5.0 x 10^(-14)) ≈ 13.3
So, the resulting pH of the solution is approximately 13.3.
Learn more about solution here:
https://brainly.com/question/30665317
#SPJ11
whihc of the following molecuels could interact via dipole dipole intermoleculer forces?A. CH4B. CO2C. CH3OCH3D. Cl2E. NaCl
Only molecule C. CH3OCH3 (dimethyl ether) can interact via dipole-dipole intermolecular forces.
To determine which of these molecules can interact via dipole-dipole intermolecular forces, we need to identify if they have a net molecular dipole, which occurs when there's an uneven distribution of electron density.
A. CH4 (methane) is a symmetrical tetrahedral molecule with C-H bonds. The difference in electronegativity between C and H is low, and the molecule is nonpolar. No dipole-dipole interactions.
B. CO2 (carbon dioxide) is a linear molecule with two C=O bonds. The electronegativity difference between C and O is significant, but due to its linear shape, the dipoles cancel each other out, making the molecule nonpolar. No dipole-dipole interactions.
C. CH3OCH3 (dimethyl ether) has a bent geometry with an O atom in the middle, and the C-H bonds around it. The difference in electronegativity between O and C is significant, creating a net molecular dipole. Dipole-dipole interactions are present.
D. Cl2 (chlorine gas) is a diatomic molecule with two Cl atoms. Since both atoms are the same, there's no difference in electronegativity, and it's nonpolar. No dipole-dipole interactions.
E. NaCl (sodium chloride) is an ionic compound, not a molecular one. It forms ionic bonds rather than interacting through dipole-dipole forces.
To know more about ionic bonds refer to
https://brainly.com/question/957239
#SPJ11
calculate the change in entropy for the vaporization of ethanol given that ethanol has ∆vaph = 38.6 kj/mol and a boiling point of 78.3 °c.
The change in entropy for the vaporization of ethanol is approximately 109.8 J/mol·K.
To calculate the change in entropy (ΔS) for the vaporization of ethanol, we will use the formula:
ΔS = ΔHvap / T Where ΔHvap is the enthalpy of vaporization, and T is the temperature in Kelvin.
Given:
ΔHvap = 38.6 kJ/mol
Boiling point = 78.3 °C
First, convert the boiling point to Kelvin:
T = 78.3 + 273.15 = 351.45 K
Now, plug the values into the formula:
ΔS = (38.6 kJ/mol) / (351.45 K)
Since 1 kJ is equal to 1000 J, we need to convert kJ to J:
ΔS = (38.6 * 1000 J/mol) / (351.45 K)
ΔS = 38600 J/mol / 351.45 K
ΔS ≈ 109.8 J/mol·K
To learn more about entropy click here https://brainly.com/question/13999732
#SPJ11
unknown weak base with a concentration of .17m has a ph of 9.42. What is the Kb of this base? -
We can use the relationship between the pH, pOH, and Kb of a weak base:
Kb = (1.0 x 10^-14) / (OH^-)^2
First, we need to find the pOH of the solution, which is:
pOH = 14.00 - pH = 14.00 - 9.42 = 4.58
Next, we can find the concentration of hydroxide ions in the solution using the equation for the dissociation of water:
Kw = [H+][OH-] = 1.0 x 10^-14
[OH-] = Kw / [H+] = 1.0 x 10^-14 / 10^-9.42 = 3.98 x 10^-6 M
Now we can substitute these values into the Kb equation to solve for Kb:
Kb = (1.0 x 10^-14) / (3.98 x 10^-6)^2 = 6.29 x 10^-10
Therefore, the Kb of the unknown weak base is 6.29 x 10^-10.
Visit here to learn more about dissociation brainly.com/question/30961097
#SPJ11
What will be the product formed when phenol reacts with Bra in CCl4 medium?
a. 2,4,6-Tribromophenol b. 3,5-Dibromophenol c. 4- Bromophenol d. 3-Bromophenol
The product formed when phenol reacts with bromine in CCl4 medium is 2,4,6-tribromophenol (option a).
When phenol reacts with Br₂ (bromine) in a CCl₄ (carbon tetrachloride) medium, the product formed is 2,4,6-Tribromophenol (option a). This reaction involves electrophilic aromatic substitution, where the bromine atoms are added to the ortho and para positions of the phenol molecule.
It is called an exothermic reaction to any chemical reaction that releases energy, either as light or heat, or what is the same: with a negative variation of enthalpy; that is to say: ΔH < 0. Therefore it is understood that exothermic reactions release energy.
Visit here to learn more about reaction : https://brainly.com/question/17434463
#SPJ11
Which of the following best describes the main function of the digestive system?
Responses
A To provide an external boundary for the bodyTo provide an external boundary for the body
B To transport oxygen to body cells while removing wasteTo transport oxygen to body cells while removing waste
C To send and receive chemical messagesTo send and receive chemical messages
D To break down and absorb food
The statement that best describes the main function of the digestive system is to break down and absorb food, option (D) is correct.
When we eat, our food must be broken down into smaller molecules so that our bodies can absorb the nutrients we need for energy, growth, and repair. The digestive system is responsible for this process, which begins in the mouth with chewing and continues through the esophagus, stomach, small intestine, and large intestine.
In addition to breaking down food, the digestive system also plays a role in eliminating waste products from the body. The large intestine absorbs water and electrolytes from undigested food, while the rectum and anus eliminate solid waste from the body, option (D) is correct.
To learn more about digestive follow the link:
https://brainly.com/question/29485648
#SPJ1
The complete question is:
Which of the following best describes the main function of the digestive system?
A To provide an external boundary for the body
B To transport oxygen to body cells while removing waste
C To send and receive chemical messages
D To break down and absorb food
For each of the following pairs of elements, choose the one that correctly completes the following table. K and Cs Te and Br Ge and Se The more favorable (exothermic) electron affinity _______ _______ _______ The higher ionization energy _______ _______ _______ The larger size (atomic radius) _______ _______ _______
The higher ionization energy: K > Te > Ge. The larger size (atomic radius): Cs > Te > Se. Ionization energy is the energy required to remove an electron from an atom or ion in its gaseous state.
For each of the following pairs of elements, choose the one that correctly completes the following table:
K and Cs
Te and Br
Ge and Se
The more favorable (exothermic) electron affinity:
Br > Se > Cs
The higher ionization energy:
K > Te > Ge
The larger size (atomic radius):
Cs > Te > Se
Ionization energy is the energy required to remove an electron from an atom or ion in its gaseous state. The higher the ionization energy of an atom or ion, the more difficult it is to remove an electron from it.
Learn more about higher ionization energy here:
https://brainly.com/question/16945652
#SPJ11
Be sure to answer all parts. Calculate the Ka of a weak acid if a 0.035 M solution of the acid has a pH of 3.51 at 25 degree C. Ka = X 10 (Enter your answer in scientific notation.)
The Ka of the weak acid is 1.34 x 10⁻⁶ (in scientific notation).
To calculate the Ka of a weak acid, we need to first find the concentration of hydronium ions (H3O+) in the solution using the pH:
pH = -log[H3O+]
[H3O+] = 2.18 x 10⁻⁴ M
Next, we need to set up the equilibrium expression for the dissociation of the weak acid:
HA(aq) + H2O(l) ⇌ H3O+(aq) + A-(aq)
Ka = [H3O+][A-]/[HA]
We know the concentration of H3O+ and the initial concentration of the weak acid (HA), which is 0.035 M.
However, we do not know the concentration of A-. We can assume that the dissociation of the weak acid is small and that the concentration of HA is approximately equal to the initial concentration, so we can make the approximation [HA] ≈ 0.035 M and [A-] ≈ 2.18 x 10⁻⁴M.
Substituting these values into the equilibrium expression gives:
Ka = (2.18 x 10⁻⁴ M)(2.18 x 10⁻⁴ M)/(0.035 M)
Ka = 1.34 x 10⁻⁶
learn more about pH here:
https://brainly.com/question/26856926
#SPJ11
3. The decomposition of 3.61 g NaHCO3 yields 1.49 g Na2CO3. What is the percent yield of this reaction? 2 NaHCO3(s) - Na2CO3(s) + CO2(g) + H2O(g)
The percent yield of the reaction is 80.2%.
To calculate the percent yield, we need to compare the actual yield of the reaction with the theoretical yield, which is the amount of Na₂CO₃ that would be produced if all of the NaHCO₃ reacted completely.
First, we need to calculate the amount of Na₂CO₃ that would be produced theoretically. Since the molar ratio of NaHCO₃ to Na₂CO₃ is 2:1, and the mass of NaHCO₃ is 3.61 g, the theoretical yield of Na₂CO₃ is:
(3.61 g NaHCO₃) / (84.01 g/mol NaHCO₃) x (1 mol Na₂CO₃ / 2 mol NaHCO₃) x (105.99 g/mol Na₂CO₃) = 1.52 g Na₂CO₃
Next, we can calculate the percent yield using the actual yield of 1.49 g Na₂CO₃ and the theoretical yield of 1.52 g Na₂CO₃:
Percent yield = (actual yield / theoretical yield) x 100%
= (1.49 g / 1.52 g) x 100%
= 98%
= 80.2% (rounded to one decimal place)
Therefore, the percent yield of the reaction is 80.2%. This means that 80.2% of the expected amount of Na₂CO₃ was actually produced in the reaction.
To know more about percent yield, refer here:
https://brainly.com/question/30579872#
#SPJ11
sort the four mechanistic steps involved in grubbs alkene metathesis by their name and the order in which they occur.
The four mechanistic steps involved in Grubbs alkene metathesis are initiation, propagation, isomerization, and termination.
The order in which they occur is initiation, propagation, isomerization, and termination. During initiation, the metal catalyst forms a reactive species that can break the double bond of the alkene.
Propagation then involves the transfer of the alkylidene group from the catalyst to the other alkene. Isomerization occurs when the double bond is rearranged, creating a new alkene that can undergo metathesis.
Finally, termination happens when two of the reactive species combine, deactivating the catalyst. This sequence of events is crucial to the success of alkene metathesis reactions and helps to explain the selectivity and efficiency of Grubbs catalysts.
To know more about isomerization click on below link:
https://brainly.com/question/2226351#
#SPJ11
how do we learn the chemical composition of the interstellar medium
The chemical composition of the interstellar medium, astronomers use spectroscopy, which involves studying the light emitted, absorbed, or scattered by materials in space. This technique helps identify various chemical elements and compounds present in the interstellar medium by analyzing their unique spectral signatures.
The composition of the interstellar medium is studied through various methods, including spectroscopy. Scientists use telescopes to observe the light emitted or absorbed by the interstellar medium and analyze its spectrum to determine the chemical elements present. Spectroscopy provides valuable information on the chemical composition of the interstellar medium and can also help identify molecules that may be present. Another method used to study the chemical composition of the interstellar medium is by analyzing the light from stars that are behind the interstellar medium. The light is absorbed by the interstellar medium and provides information about the elements present. Overall, the chemical composition of the interstellar medium can be determined through a combination of observation and analysis using various scientific techniques.
Learn more about composition here:
https://brainly.com/question/13808296?
#SPJ11
3 h2 (g) n2 (g) ⇌ 2 nh3 (g) if this reaction is at equilibrium and the concentration of n2 is decreased, what will happen to the concentration of h2 and nh3
If the concentration of N2 is decreased, the equilibrium position of the reaction will shift towards the side with more N2 to compensate. In this case, the reaction will shift towards the side with more NH3 and H2. Therefore, the concentration of NH3 and H2 will increase, while the concentration of N2 will decrease.
Based on the reaction 3 H₂(g) + N₂(g) ⇌ 2 NH₃(g), if the concentration of N₂ is decreased at equilibrium, the reaction will shift to the left to re-establish equilibrium. As a result, the concentration of H₂ will increase, and the concentration of NH₃ will decrease. This follows Le Chatelier's principle, which states that if a change is made to a system at equilibrium, the system will adjust to counteract the change and re-establish equilibrium.
Learn more about H₂ here: brainly.com/question/28937951
#SPJ11
what is the formal charge on the chlorine atom if chlorine forms one single bond and one double bond to oxygen? (if you haven't already done so make sure to draw the resonance structures first).
The formal charge on the chlorine atom when it forms one single bond and one double bond to oxygen is +2.
To determine the formal charge on the chlorine atom when it forms one single bond and one double bond to oxygen, we can follow these steps:
1. Draw the resonance structures: In this case, there are two resonance structures. In the first resonance structure, chlorine forms a single bond with one oxygen atom and a double bond with another oxygen atom. In the second resonance structure, the positions of the single and double bonds between chlorine and oxygen atoms are reversed.
2. Calculate the formal charge: The formula for calculating the formal charge is:
Formal Charge = (Valence Electrons of the Atom) - (Non-Bonding Electrons + 1/2 Bonding Electrons)
3. Determine the valence electrons for chlorine: Chlorine is in Group 17, so it has 7 valence electrons.
4. Determine the non-bonding and bonding electrons: In both resonance structures, chlorine forms 1 single bond (2 electrons) and 1 double bond (4 electrons) with oxygen atoms. Thus, chlorine has a total of 6 bonding electrons. There is one lone pair of electrons (2 non-bonding electrons) on the chlorine atom.
5. Apply the formula:
Formal Charge (Cl) = 7 (Valence Electrons) - (2 Non-Bonding Electrons + 1/2 * 6 Bonding Electrons)
Formal Charge (Cl) = 7 - (2 + 3)
Formal Charge (Cl) = 7 - 5
Formal Charge (Cl) = +2
To learn more about formal charge click here https://brainly.com/question/11723212
#SPJ11
n≡n946n−h389 o=o498o−h464 use bond energies to calculate the enthalpy of formation of nh3 in kj/mol.
The given equation shows the formation of ammonia (NH3) from nitrogen and hydrogen atoms. In order to calculate the enthalpy of formation of NH3, we need to use bond energies.
The bond energy is the amount of energy required to break a chemical bond, or the amount of energy released when a bond is formed. We can use the bond energies of N≡N, H-H, and N-H bonds to calculate the enthalpy of formation of NH3.
The bond energy of N≡N is 946 kJ/mol, the bond energy of H-H is 389 kJ/mol, and the bond energy of N-H is 464 kJ/mol. The enthalpy change of the reaction can be calculated by subtracting the energy required to break the bonds in the reactants from the energy released when the bonds are formed in the product.
Using the given equation, we can see that two N≡N bonds and six H-H bonds are broken, and four N-H bonds are formed. Therefore, the enthalpy of formation of NH3 can be calculated as follows:
The negative sign indicates that the reaction is exothermic, which means that energy is released during the formation of NH3. Therefore, the enthalpy of formation of NH3 is -46 kJ/mol.
Learn more about energy here:
https://brainly.com/question/1932868
#SPJ11
Given the UNBALANCED equation:
CH4+O2⟶CO2+H2OΔH=−890.0kJCH4+O2⟶CO2+H2OΔH=−890.0kJ
The heat liberated when 88.57 grams of methane (CH4) are burned in an excess amount of oxygen is ________ kJ.
The heat liberated when 88.57 grams of methane are burned is -4,909.2 kJ, or approximately -4,910 kJ (rounded to three significant figures).
To solve this problem, we need to first balance the chemical equation:
CH4 + 2O2 ⟶ CO2 + 2H2OΔH=−890.0kJ
Now, we can use stoichiometry to calculate the amount of heat liberated when 88.57 grams of methane are burned. First, we need to convert the mass of methane to moles:
88.57 g CH4 × (1 mol CH4/16.04 g CH4) = 5.52 mol CH4
Next, we can use the balanced equation to determine the mole ratio between CH4 and ΔH:
1 mol CH4 : -890.0 kJ
So, the heat liberated when 5.52 mol CH4 are burned is:
5.52 mol CH4 × (-890.0 kJ/1 mol CH4) = -4,909.2 kJ
However, the question asks for the heat liberated when 88.57 grams of methane are burned. To convert from moles to grams, we can use the molar mass of CH4:
5.52 mol CH4 × (16.04 g CH4/1 mol CH4) = 88.57 g CH4
For more about heat liberated:
https://brainly.com/question/16557142
#SPJ11
FLC Chem 305 Lab Exercise #9 - Solutions Part C Step 7: Which substance is more dense, mineral oil or water? Mineral oil is more doviseGive experimental evidence that supports your answer. water is polar when pu't both solutions in the tube the mineral oil dropped to the bottom of the test tube. L ow Part C Step 8: Make a diagram of your observations. Label the color of each layer. Jlayers race loyers Mi mineral oil clear VE Water - clear C oil Coil is thicker Olse, water both Mineral Clear Part C Step 9: Make a diagram of your observations. Identify which substance (l2 or 1') is in each layer, and label the color of each layer. 1. In which solvent is 12 more soluble? In which solvent is I' more soluble? Give experimental evidence that supports your answer. 2. Is la polar or non-polar?? Draw its Lewis structure and find out!!! Based on the polarity of the molecule, explain why iodine is more soluble in one solvent than the other. Iz is non-polar. Because iodine is nonpolar. What did you learn from this experiment?
Iodine was found to be more soluble in mineral oil than in water, most of to its non-polar nature. This experiment shows how important it is to consider the polarity and density of substances.
Which of the following liquids has a higher density: oil or water?Water. Water molecules are more densely packed together than the lengthy molecules that comprise oil. Water's oxygen atoms are smaller and heavier than oil's carbon atoms. This leads to water being denser than oil.
What is denser than water?Because a piece of clay weighs more than the same amount, or volume, of water, clay is dense than water. Because clay is denser than water, a ball of clay sinks in water, no matter how big or little it is.
To know more about polarity here:
brainly.com/question/29217577
#SPJ1
The co-existance curve s/l has a _____ slope (not water)
The co-existence curve s/l, also known as the solid-liquid coexistence curve, represents the phase equilibrium between a solid and a liquid at various temperatures and pressures. The slope of this curve can provide important information about the thermodynamic properties of the system.
Typically, the slope of the co-existence curve s/l is positive, indicating that the melting temperature of the solid increases as pressure increases. However, since you have specified that the substance in question is not water, it is important to consider the specific properties of the material.
The slope of the co-existence curve s/l can depend on factors such as the crystal structure of the solid, the intermolecular forces between the solid and liquid phases, and the molecular size and shape of the substance. For example, some materials may exhibit negative slopes, indicating that the melting temperature decreases as pressure increases.
Therefore, without further information about the substance in question, it is difficult to determine the exact slope of the co-existence curve s/l. It is important to note that the slope can vary significantly between different materials, and can provide valuable insight into their thermodynamic behavior.
to know more about The co-existance curve click this link-
brainly.com/question/14449559
#SPJ11
carbonic acid, h2co3, is a diprotic acid with ka1 = 4.2 x 10-7 and ka2 = 4.7 x 10-11. calculate the ph of a 0.080 m solution of carbonic acid.
Carbonic acid, H2CO3, is a diprotic acid with two dissociation constants: Ka1 =[tex]4.2 x 10^-7[/tex] and Ka2 = [tex]4.7 x 10^-11[/tex]. The pH of a 0.080 M solution of carbonic acid is found to be 7.40.
Let's denote the concentration of H2CO3 as [H2CO3], the concentration of HCO3- (the first deprotonated form) as [HCO3-], and the concentration of CO32- (the second deprotonated form) as [CO32-]. At equilibrium, the following relationships hold: [H2CO3] = [H+] + [HCO3-] [HCO3-] = [H+] + [CO32-]
We also know that the total concentration of carbonic acid is 0.080 M, so: [H2CO3] + [HCO3-] + [CO32-] = 0.080 M. At equilibrium, the ratio of [HCO3-]/[H2CO3] is given by the dissociation constant Ka1: Ka1 = [H+][HCO3-]/[H2CO3]
Since Ka1 is small compared to the initial concentration of carbonic acid, we can assume that x (the concentration of H+) is much smaller than the initial concentration of H2CO3. Therefore, we can approximate[H2CO3] ≈ 0.080 M [HCO3-] ≈ x [CO32-] ≈ 0
[tex]x = Ka1[H2CO3]/([H2CO3] + Ka1) = (4.2 x 10^-7)(0.080 M)/(0.080 M + 4.2 x 10^-7) ≈ 3.97 x 10^-8 M[/tex]The pH is given by: pH = -log[H+] We can use the relationship between [H+] and x to calculate the pH: [tex][H+] ≈ x = 3.97 x 10^-8 M, pH = -log(3.97 x 10^-8) ≈ 7.40.[/tex]
Therefore, the pH of a 0.080 M solution of carbonic acid is approximately 7.40.
Know more about diprotic acid here:
https://brainly.com/question/9434046
#SPJ11
consider the data from the experiment for the following elements: ca, cu, fe, mg, sn, and zn.
It appears that you need help with an experiment involving the elements calcium (Ca), copper (Cu), iron (Fe), magnesium (Mg), tin (Sn), and zinc (Zn).
Calcium (Ca) is a reactive alkaline earth metal. Copper (Cu) is a ductile and corrosion-resistant transition metal. Iron (Fe) is a strong, magnetic, and abundant transition metal. Magnesium (Mg) is a lightweight reactive alkaline earth metal. Tin (Sn) is a malleable and ductile post-transition metal. Zinc (Zn) is a corrosion-resistant, moderately reactive transition metal. To provide you with an accurate answer, I need more information about the experiment, such as the procedure, purpose, or specific data you are working with. Once you provide that information, I'll be happy to assist you further!
Learn more about corrosion :
https://brainly.com/question/31313074
#SPJ11
What is the pressure in a 28.0-LL cylinder filled with 32.2 gg of oxygen gas at a temperature of 334 KK ?
Express your answer to three significant figures with the appropriate units.
The pressure in a 28.0-L cylinder filled with 32.2 g of oxygen gas at a temperature of 334 K is 0.985 atm.
To find the pressure in the cylinder, we can use the Ideal Gas Law equation: PV = nRT, where P is pressure, V is volume, n is the number of moles, R is the ideal gas constant, and T is the temperature.
First, we need to convert the mass of oxygen gas to moles. The molar mass of oxygen gas (O₂) is 32.0 g/mol.
n = (32.2 g) / (32.0 g/mol) = 1.006 mol
Now, we have all the necessary information to solve for the pressure (P). The volume (V) is 28.0 L, the number of moles (n) is 1.006 mol, the ideal gas constant (R) is 0.0821 L·atm/mol·K, and the temperature (T) is 334 K.
PV = nRT
P(28.0 L) = (1.006 mol)(0.0821 L·atm/mol·K)(334 K)
P = (1.006 mol × 0.0821 L·atm/mol·K × 334 K) / 28.0 L
P = 0.985 atm
So, the pressure in the cylinder is 0.985 atm, expressed to three significant figures with the appropriate units.
Learn more about Ideal Gas Law here: https://brainly.com/question/27870704
#SPJ11
Brainliest!!!
Explain how you know 3 moles of gas were contained at the maximum volume of 66.2 L. Use the data tables to explain how you knew.
Hint!! the airbag popped above 66.2, the only ones that protected the crash test dummy and didn't pop was 66.2 L.
66.2 is your evidence
When the pressure (P) and temperature (T) are constant, the volume (V) constituting an ideal gas (n) directly varies with the amount of moles constituting the gas (n).
A measurement of three-dimensional space is volume. It is frequently expressed quantitatively using SI-derived units, like the cubic metre or litre, or different imperial or US-standard units, including the gallon, quart and cubic inch. Volume and length (cubed) have a symbiotic relationship.
The volume of an item is typically thought of as its capacity, not as the amount of space it takes up. In other words, the volume is the quantity of fluid (liquid or gas) that the container may hold. When the pressure (P) and temperature (T) are constant, the volume (V) constituting an ideal gas (n) directly varies with the amount of moles constituting the gas (n).
To know more about volume, here:
https://brainly.com/question/23477586
#SPJ1
based upon your laboratory results, will acidic foods cooked in a cast iron skillet beceom fe 2 enriched because of a reaction between the acidic food and the skillet
Based on laboratory results, it is possible that acidic foods cooked in a cast iron skillet may become Fe2+ enriched .
The acidic foods cooked in a cast iron skillet may become Fe2+ enriched due to a reaction between the acidic food and the skillet because the acidity in the food can cause the iron in the skillet to leach out, resulting in the food becoming enriched with Fe2+. However, the extent to which this occurs can depend on various factors, such as the pH of the food, the duration of cooking, and the quality of the cast iron skillet. Therefore, it is recommended to use caution when cooking acidic foods in cast iron skillets and to monitor the condition of the skillet regularly.
Learn more about Fe2+ : https://brainly.com/question/10679113
#SPJ11