(b) The cylinder shown in figure 2 is fitted with a freely sliding piston containing an ideal gas of mass 13g and volume 1.0×10⁴ cm⁵ . The tempreture of the gas is 25°C and it is initially at atmospheric pressure.

(i) The gas is heated to a Tempreture of 400°C . what is the new volume of the gas?​

Answer:

When the obstacle is fixed, the law of action and reaction, makes the reflected wave is inverted.

When the obstacle is mobile, he mobile point, it moves in the direction of the wave, therefore there is no inversion of it.

Explanation:

Waves when they reach an obstacle behave like a shock, therefore if we use the conservation of momentum the wave must reverse its speed, this explains that the speed changes sign, the wave is reflected.

When the obstacle is fixed, the wave when it reaches the obstacle exerts a force on the point, by the law of action and reaction the point exerts on the wave a force of equal magnitude but in the opposite direction, this reaction force which makes the reflected wave is inverted.

When the obstacle is mobile, this is without friction, when the wave arrives it exerts a force on the mobile point, it moves in the direction of the wave, reaching the maximum amplitude of the incident wave, when it is reflected the point begins to go down along with the wave, therefore there is no inversion of it.

the angle of incidence is always equal to the angle of reflection,

Explanation:

Important Information. When light is reflected from a surface, the angle of incidence is always equal to the angle of reflection, where both angles are measured from the path of the light to the normal to the surface at the point at which light strikes the surface. This equality is known as the law of reflection.

Answer:

It is the angle the incident ray makes with a line drawn perpendicular to the reflecting surface

Answer:

Explanation:

Answer:

1. 960

2. 16.6666

3. 0.41666666666

4. 10

Explanation:

A*V=W

A*120=50

V=I*R

R being resistance

(I'm not a 100% sure on 2 & 3)

Answer:

A. Both open and close

Explanation:

just took the test

Answer:

When sunlight shines through an orange solution, the violet, blue and green wavelengths are absorbed. The other colors pass through.

Answer:

The sand absorbed more heat than the soil.

Explanation:

your welcome

Answer:

The particles are held rigidly in place by all the other particles around them so they can't slip past one another or move apart. This gives solids a fixed shape and a fixed volume.

Explanation:

On earth,

g=10 m/s^2

When M=2 kg,

weight on earth=2×10

=20N

When M=3.5 kg,

weight on Earth=3.5×10

=35N

When M=5kg,

weight on Earth=5.25×10

=52.5N

Answer:

D - 3/5r

Explanation:

Khan Academy

Answer:

3600

Explanation:

90 of 120 is 3/4 so 4800 - 1200 is 3600.

[tex]\huge{\textbf{\textsf{{\color{pink}{An}}{\red{sw}}{\orange{er}} {\color{yellow}{:}}}}}[/tex]

ㅤ1,111+1,102

ㅤ= 2,213

Answer:

A microwave

Explanation

The human retina can only detect incident light that falls in waves 400 to 720 nanometers long, so we can't see microwave or ultraviolet wavelengths. This also applies to infrared lights which has wavelengths longer than visible and shorter than microwaves, thus being invisible to the human eye.

Answer:

C.) Microwave

Explanation:

USAtestprep

Answer:

picture isn't rlly clear :/

Answer:

Don't know this but I will do research

Answer:

1 it could have been the way he put them in and 2it could be the directions there in.

Answer:

3.43 A

Explanation:

Applying,

V = IR'.............. Equation 1

Where V = Voltage, I = current, R' = Total resistance

Make I the subject of the equation

I = V/R'........... Equation 2

From the question

Given: V = 120 volt, R' = (12+23) = 35 0hm

Substitute these values into equation 2

I = 120/35

I = 3.43 A

Answer:

1240000 kg * m/s

Explanation:

p = momentum

p = mass * velocity in kg* m/s

62,000 kg * 20 m/s = 1240000 kg * m/s

Answer:

Explanation:

Probably the most famous force of all is gravity. We humans on earth think of gravity as an apple hitting Isaac Newton on the head. Gravity means that stuff falls down. But this is only our experience of gravity. In truth, just as the earth pulls the apple towards it due to a gravitational force, the apple pulls the earth as well. The thing is, the earth is just so massive that it overwhelms all the gravity interactions of every other object on the planet. Every object with mass exerts a gravitational force on every other object. And there is a formula for calculating the strengths of these forces, as depicted in the diagram below:

Diagram of gravitational forces between two spheres

Diagram of gravitational forces between two spheres

Let’s examine this formula a bit more closely.

F refers to the gravitational force, the vector we ultimately want to compute and pass into our applyForce() function.

G is the universal gravitational constant, which in our world equals 6.67428 x 10^-11 meters cubed per kilogram per second squared. This is a pretty important number if your name is Isaac Newton or Albert Einstein. It’s not an important number if you are a ProcessingJS programmer. Again, it’s a constant that we can use to make the forces in our world weaker or stronger. Just making it equal to one and ignoring it isn’t such a terrible choice either.

m_1m  

1

​  

m, start subscript, 1, end subscript and m_2m  

2

​  

m, start subscript, 2, end subscript are the masses of objects 1 and 2. As we saw with Newton’s second law (\vec{F} = M\vec{A}  

F

=M  

A

F, with, vector, on top, equals, M, A, with, vector, on top), mass is also something we could choose to ignore. After all, shapes drawn on the screen don’t actually have a physical mass. However, if we keep these values, we can create more interesting simulations in which “bigger” objects exert a stronger gravitational force than smaller ones.

\hat{r}  

r

^

r, with, hat, on top refers to the unit vector pointing from object 1 to object 2. As we’ll see in a moment, we can compute this direction vector by subtracting the location of one object from the other.

r^2r  

2

r, squared refers to the distance between the two objects squared. Let’s take a moment to think about this a bit more. With everything on the top of the formula—G, m_1m  

1

​  

m, start subscript, 1, end subscript, m_2m  

2

​  

m, start subscript, 2, end subscript—the bigger its value, the stronger the force. Big mass, big force. Big G, big force. Now, when we divide by something, we have the opposite. The strength of the force is inversely proportional to the distance squared. The farther away an object is, the weaker the force; the closer, the stronger.

Hopefully by now the formula makes some sense to us. We’ve looked at a diagram and dissected the individual components of the formula. Now it’s time to figure out how we translate the math into ProcessingJS code. Let’s make the following assumptions.

We have two objects, and:

Each object has a PVector location: location1 and location2.

Each object has a numeric mass: mass1 and mass2.

There is a numeric variable G for the universal gravitational constant.

Given these assumptions, we want to compute a PVector force, the force of gravity. We’ll do it in two parts. First, we’ll compute the direction of the force \hat{r}  

r

^

r, with, hat, on top in the formula above. Second, we’ll calculate the strength of the force according to the masses and distance.

Remember when we figured out how to have an object accelerate towards the mouse? We're going to use the same logic.

Answer:

4.7 is 10 as much as the number 0.47.

If you multiply 0.47 x 10 it will equal 4.7

Explanation:

Answer:

Bb can be an example

Explanation:

That is Because brown is dominated, so it is in Capital.

Answer:

More energy is transferred in situation A

Explanation:

Each of the situations are analyzed as follows;

Situation A

The temperature of the cup of hot chocolate = 40 °C

The temperature of the interior of the freezer in which the chocolate is placed = -20 °C

We note that at 0°C, the water in the chocolate freezes

The energy transferred by the chocolate to the freezer before freezing is given approximately as follows;

E₁ = m×c₁×ΔT₁

Where;

m = The mass of the chocolate

c₁ = The specific heat capacity of water = 4.184 kJ/(kg·K)

ΔT₁ = The change in temperature from 40 °C to 0°C

Therefore, we have;

E₁ = m×4.184×(40 - 0) = 167.360·m kJ

The heat the coffee gives to turn to ice is given as follows;

E₂ = m·[tex]H_f[/tex]

Where;

[tex]H_f[/tex] = The latent heat of fusion = 334 kJ/kg

∴ E₂ = m × 334 kJ/kg = 334·m kJ

The heat required to cool the frozen ice to -20 °C is given as follows;

E₃ = m·c₂·ΔT₂

Where;

c₂ = The specific heat capacity of ice = 2.108 kJ/(kg·K)

Therefore, we have;

E₃ = m × 2.108 ×(0 - (-20)) = 42.16

E₃ = 42.16·m kJ/(kg·K)

The total heat transferred = (167.360 + 334 + 42.16)·m kJ/(kg·K) = 543.52·m kJ/(kg·K)

Situation B

The temperature of the cup of hot chocolate = 90 °C

The temperature of the room in which the chocolate is placed = 25 °C

The heat transferred by the hot cup of coffee, E, is given as follows;

E = m×4.184×(90 - 25) = 271.96

∴ E = 271.96 kJ/(kg·K)

Therefore, the total heat transferred in situation A is approximately twice the heat transferred in situation B and is therefore more than the heat transferred in situation B

Energy transferred in situation A = 543.52 kJ/(kg·K)

Energy transferred in situation B = 271.96 kJ/(kg·K)

Energy transferred in situation A ≈ 2 × Energy transferred in situation B

∴ Energy transferred in situation A > Energy transferred in situation B.

Oil is used in industrial hydraulic systems, because It is environmentally safe. Option C is correct.

Hydraulic systems work and accomplish tasks by utilizing a pressured fluid. Another way to say it is that the pressurized fluid makes everything operate.

Because of the tremendous power of liquid fuel in hydraulics, hydraulics are often utilized in heavy machinery.

Oil is used in industrial hydraulic systems, because It is environmentally safe.

Hence,option C is correct.

To learn more about hydraulic systems, refer:

https://brainly.com/question/9439349

#SPJ2

Answer: [tex]7312.76\ J[/tex]

Explanation:

Given

Mass of crate is m=574 kg

The crate is raised up to a height of 1.3 m

time taken t=2 s

Work done to raise the crate is equal to the change in its potential energy

[tex]\Rightarrow \text{Work done W=}mgh\\\Rightarrow W=574\times 9.8\times 1.3\\\Rightarrow W=7312.76\ J[/tex]

Answer:

Crown glass. The material which the velocity of light greatest is AIR. Because the speed of light in crown glass is the speed of light in a vacuum divided by the index of refraction of crown glass, which is 1.52. This works out to 1.97 times 10 to the 8 meters per second is the speed of light in crown glass.

Answer:

a current will be induced.

Explanation:

Answer:

Explanation:Sample Response: A current will not be induced because the wire is not part of a closed circuit. The electrons have no place to flow to.

What did you include in your response? Check all that apply.

A current will not be induced.

The wire is not part of a closed circuit.