at constant temperature, 7.72 l of cl2 at 458 mm hg is compressed to 3.75 l. what is the final pressure of cl2

Answers

Answer 1

At constant temperature, 7.72 L of cl2 at 458 mmHg is compressed to 3.75 L. The final pressure of Cl₂ is 942.86 mmHg.

To calculate the final pressure we can use the boyle's law

Boyle's Law:

According to Boyle's Law, the relationship between a gas's volume and pressure is inverse. In other words, it says that as long as the number of gas moles remains constant, the product of pressure and volume for an ideal gas at constant temperature remains constant. P1V1=P2V2, where P1 is the first pressure, V1 is the first volume, P2 is the second pressure, and V2 is the second volume, is one way to state it.

So, the final pressure of Cl₂ can be calculate as follows:

P1V1=P2V2

458mmHg x 7.72 L = P2 x 3.75 L

P2 = 458mmHg x 7.72

                 3.75 L

P2 = 942.86 mmHg

Therefore, at constant temperature, 7.72 L of cl2 at 458 mmHg is compressed to 3.75 L. The final pressure of Cl₂ is 942.86 mmHg.

Learn more about Boyle's Law at https://brainly.com/question/1437490

#SPJ4


Related Questions

what is the name of the compound below? multiple choice trans-3-bromocyclohexanecarboxylic acid cis-3-bromocyclohexanecarboxylic acid trans-5-bromocyclohexanecarboxylic acid cis-5-bromocyclohexanecarboxylic acid

Answers

The compound is called cis-3-bromocyclohexanecarboxylic acid. Out of the available possibilities, this is the best decision.

What is a carboxylic acid?

The most significant functional group in C=O is the carboxylic acids. Some carboxylic acids, such citric acid, lactic acid, or fumaric acid, are produced through fermentation; the majority of these types of carboxylic acids are used in the food sector. This class of organic molecules can be obtained through several methods.

The significance of carboxylic acids in organic chemistry?

Carboxylic acids play a significant role in organic chemistry and are used to create a variety of derivatives, including esters, acid anhydrides, acid chlorides, amides, etc. They are organic substances with one or more carboxyl groups in the molecules of their molecules.

To learn more about carboxylic acid visit:

brainly.com/question/4721247

#SPJ4

An atom Y ha atomic number 13. It loe 3 electron in order to be table. What i the proton number and electron number of the atom
(a)before it loe electron
(b) after loing electron
(ii) name the of ion formed by the atom when it loe three electron. Show by illutration

Answers

In the following question the number of protons and electrons before it

a)lose electron are proton number= 13 electron =13

b) after losing electrons proton number=10 electron =10

c)the type of ion it becomes is a cation as it has a positive charge on it

What is atomic number?

The number assigned to a chemical element according to its atomic number in the periodic system, which places the elements in ascending order of the number of protons in their nuclei.

In the first scenario before loses electrons the number of protons and electrons in the atom before loses electron is 13, as given atomic number is 13.In second scenario After it loses 3 electrons Number of elctrons in the atom is 10 and number of protons is 13, as protons are present in the nucleus.

Therefore the number of protons is same i.e. 13 within the atom and no. of electrons after losing 3 electrons is 10 and it becomes a cation.

To know more about atomic number from the given link

https://brainly.com/question/11353462

#SPJ4

if 3.8 g of cu3(po4)2(s) was recovered from step 1, what was the approximate [cu2 ] in the original solution? (the molar mass of cu3(po4)2 is 381 g/mol.)

Answers

If 3.8 g of Cu₃(PO₄)₂(s) was recovered from step 1, the approximate [Cu²⁺ ] in the original solution is 0.3 M

The approximate [Cu²⁺ ] in the original solution can be calculate as follows

first we should calculate the moles of Cu₃(PO₄)₂ by dividing the mass with its molar mass

Moles of Cu₃(PO₄)₂ = mass/ mass molar

Moles Cu₃(PO₄)₂ = 3.8 g /  381 g/mol = 0.1 moles

we know the balance reaction of this reaction is

3Cu²⁺ + 2Na₃PO₄ ⇒ Cu₃(PO₄)₂ + 6 Na⁺

with unitary method we can conclude 3 Cu²⁺ produce 1 Cu₃(PO₄)₂ so we can calculate the 3Cu²⁺

mol Cu²⁺ = 3/1 x mol Cu₃(PO₄)₂

mol Cu²⁺ = 3x 0.1 = 0.3 M

Your question is incomplete but most probably the full question attached below

To learn more about Molar Mass refer to:

brainly.com/question/21334167

#SPJ4

After the equation below has been balanced for a reaction in an acidic solution, what will the coefficients of the reactants and products be, in order?

H2O2 + FeSO4 + H2SO4 →Fe2(SO4)3 + H2O
a. 1,2,1,1,2
b. 2,2,2,2,2
c. 2,1,2,2,1
d. 1,2,1,1,1

Answers

Answer:

c

Explanation:

english please im just guessing

350cubic centimetres of dilute hydrochloric acid in an experiment, what is this in dm3

Answers

350 cubic centimetres of dilute hydrochloric acid will be equivalent to 0.35 [tex]dm^3[/tex].

Volume Conversion

The problem here has to do with converting the volume of a liquid from cubic centimetres to [tex]dm^3[/tex].

Recall that:

1 centimetre = 0.1 dm

Thus:

1 cubic centimetre = 0.001 cubic decimetre or [tex]dm^3[/tex]

In this case, we are to convert 350 cubic centimetres to cubic decimetres.

If, 1 cubic centimetre = 0.001 cubic decimetre, then

350 cubic centimetres = 350 x 0.001

                                     = 0.35 [tex]dm^3[/tex]

In other words, 350 cubic centimetres of dilute hydrochloric acid would be equivalent to 0.35 [tex]dm^3[/tex] of the dilute acid.

More on volume conversion can be found here: https://brainly.com/question/13259295

#SPJ1

Granite has a specific heat of 800 J/g x °C. What mass of granite is needed to store 150,000 J of heat
if the temperature of the granite is to be increased by 15.5 °C?
O 12.1 g
O 745.3 J
O 12.1 Celsius degress
O 745.3 g

Answers

Plugging in the given values gives m = 745.3 g.

What is specific heat?

Specific heat is the quantity of heat required to raise the temperature of a unit mass of a substance by one degree Celsius. It is measured in units of energy per unit mass per degree Celsius (J/ kg-K). The specific heat of a substance is determined by its physical and chemical properties. Typically, substances with higher specific heats require more energy to heat them up, meaning they are more resistant to changes in temperature. For example, water has a higher specific heat than most other substances, and therefore it takes a lot of energy to raise its temperature.

To find the mass of granite needed to store 150,000 J of heat, we need to use the formula for specific heat: q = m * c * ΔT. Rearranging this formula to solve for m gives m = q / (c * ΔT). Plugging in the given values gives m = 150,000 J / (800 J/g x °C * 15.5 °C) = 745.3 g.

To learn more about specific heat
https://brainly.com/question/28490764
#SPJ1

If a package has 3 servings and one serving has 300 calories. How many calories are you eating if you eat the whole package?.

Answers

If you eat the whole package, you would be eating a total of 900 calories.

What is calorie?
Calories
are a measure of energy. Two main meanings of "calorie" are frequently used due to historical factors. The amount of heat required to increase the temperature of one kilogramme of water by one degree Celsius was the original definition of the huge calorie, food calorie, as well as kilogramme calorie (or one kelvin). The amount of heat required to produce the same rise in one gramme of water was known as the small calorie or gramme calorie. As a result, 1000 small calories are equal to 1 large calorie. The term "calorie" and the symbol "cal" almost always refer to the large unit in food and nutrition science.

If you eat the whole package, you would be eating a total of 900 calories (3 servings x 300 calories per serving = 900 calories).

To learn more about calorie
https://brainly.com/question/1061571
#SPJ4

12) a. Calculate the mass defect in Fe-56 if the mass of
an Fe-56 nucleus is 55.921 amu. The mass of a
proton is 1.00728 amu and the mass of a neutron
is 1.008665 amu.

Show work

b. Determine the binding energy of an O-16
nucleus. The O-16 nucleus has a mass of 15.9905
amu. A proton has a mass of 1.00728 amu, a neutron has a mass of 1.008665 amu, and 1 amu is equivalent to 931 MeV of energy.

Show work

c. What percentage of a radioactive substance
remains after 7.00 half-lives have elapsed?

Show work

d. Carbon-11 is used in medical imaging. The half-
life of this radioisotope is 20.4 min. What
percentage of a sample remains after 60.0 min?

show work

Answers

The mass defect in fe-56 is 0.528.

Binding energy  -  quantity of energy required to split a particle from a machine of debris or to disperse all of the debris of the system. Binding power is particularly applicable to subatomic debris in atomic nuclei, to electrons bound to nuclei in atoms, and to atoms and ions certain collectively in crystals.

Binding energy is the minimal quantity of electricity required to free an item from a sure machine and escape from its place of have an impact on (i.e. break out to infinity). inside the given case, it's miles the energy required through the satellite to depart its orbit around the earth and break out to infinity.

Learn more about Binding energy here:-

brainly.com/question/23020604

#SPJ4

Which reaction will most likely take place based on the activity series?

Li > K > Ba > Ca > Na > Mn > Zn > Cr > Fe > Cd > Ni > H > Sb > Cu > Ag > Pd > Hg > Pt

Pt + FeCl3 Right arrow.
Mn + CaO Right arrow.
Li + ZnCO3 Right arrow.
Cu + 2KNO3 Right arrow.

Answers

According to the reactivity series, Lithium is more reactive than Zinc therefore, Li + ZnCO₃ reaction will most likely take place. Therefore, option (C) is correct.

What is reactivity series?

The reactivity series or the activity series can be defined as the arrangement of metals or elements in the descending order of their reactivities.

The metals at the top of the reactivity series are powerful reducing agents and can be readily oxidized and easily corrode. The reducing ability of metals becomes weaker while moving down the reactivity series.

Lithium is more reactive than Zn so it can displace Zinc from zinc carbonate therefore, Li + ZnCO₃ reaction will most likely take place. Pt is less reactive than Fe so it can not displace Fe from FeCl₃ therefore, Pt + FeCl₃ reaction will not take place.

Learn more about the reactivity series, here:

brainly.com/question/13960839

#SPJ1

Answer:

c

Explanation:

edge 2023

To estimate the molar mass of the unknown gas based on the molar mass of argon, which assumptions should be made?.

Answers

The molar mass of the unknown gas is 100.4 g/mol

What is Molar mass?

Molar mass of argon = 39.95 g/mol

After filling with argon the flask gained 3.221 grams

After filling with an unknown gas, the flask gained 8.107 grams

The gas with the higher molar mass will have the higher density.

Ar - 3.224 g; molar mass = 39.95 g/mol

X = 8.102 g; molar mass = ??

Molar mass of the unknown gas = 8.102g X *(39.95 g/mol  / 3.224 g)

                                                    = 100.4 g/mol

The molar mass of the unknown gas is 100.4 g/mol

We all wish to know how many molecules are present in a given substance. Atoms and molecules are incredibly small in both size and mass. One sample mole's weight is the molar mass. To determine the molar mass, connect the atomic masses (atomic weights) of each atom in the molecule. Using the mass listed in the Periodic Table or Atomic Weight Table, determine the atomic mass for each element.

Learn more about Molar Mass from given link

https://brainly.com/question/837939

#SPJ4

How many grams of Ag2S2O3 form
when 125.0 g AgBr reacts completely
according to the reaction below?
2AgBr + Na2S2O3 → Ag2S2O3 + 2NaBr
Ag2S2O3: 327.74 g/mol
AgBr: 187.70 g/mol
[ ? ] g Ag₂S2O3

Answers

A) Molar mass of AgBr,

MM = 1*MM(Ag) + 1*MM(Br)

= 1*107.9 + 1*79.9

= 187.8 g/mol

mass of AgBr = 0.45 g

mol of AgBr = (mass)/(molar mass)

= 0.45/1.878*10^2

= 2.396*10^-3 mol

B) According to balanced equation,

mol of Na2S2O3 formed = (2/1)* moles of AgBr

= (2/1)*2.396*10^-3

= 4.792*10^-3 mol

Answer: 4.79*10^-3 mol

B) Using: number of mol = M(Na2S2O3)*V(Na2S2O3)

4.792*10^-3 mol = 0.02 M * V

V = 0.240 L

V = 240 mL

To know more about Mole concept, visit:

https://brainly.com/question/16488605

#SPJ1

Answer:

Explanation:

it's 109.13 g Ag2S2O3 . i have it when i was in school :)

calculate the ph of a buffer in which the concentration of hocl is 6.50 x 10-4 m and that of naocl is 7.50 x 10-4 m. the ka of hocl is 3.0 x 10-8. show work. pay attention to significant figures.

Answers

The pH of a buffer in which  the concentration of HOCl is 6.50 x 10⁻⁴ M and that of  NaOClis 7.50 x 10⁻⁴ M( the ka of HOCl is 3.0 x 10⁻⁸) is 7.51.

We can find out the pH of the buffer solution by Henderson-Hasselbalch equation, derived by Lawrence Joseph Henderson and Karl Albert Hasselbalch. It is given as:

pH = pKa + log [A⁻] / [HA]

Here,

pH is the acidity of the solution

pKa is the negative logarithm of Ka (ionization constant of acid)

[A⁻]  is the concentration of salt/ conjugate base

and [HA] is the concentration of acid.

given,

concentration of NaOCl, [A⁻] = 7.50× 10⁻⁴ M

concentration of HOCl [HA] = 6.50 × 10⁻⁴ M

Ka of HOCl = 3.0 × 10⁻⁸

∵ pKa = -log(Ka)

pKa = -log(3.0 × 10⁻⁸)

pKa= 7.45

Putting these values in Henderson-Hasselbalch equation:

pH = 7.45 + log 7.50× 10⁻⁴ M/6.50 × 10⁻⁴ M

pH = 7.45 + log 7.50/6.50

pH = 7.45 + log 1.15

pH = 7.45 + 0.06

pH = 7.51

Thus,  the pH of the buffer is 7.51.

To know more about pH of a buffer here

https://brainly.com/question/14748875

#SPJ4

Four metal cubes, each at a different starting temperature, are placed in contact with each other. Which of the following describes the most likely flow of thermal energy in this situation? A Cube #4 to Cube #2 B Cube #1 to Cube #2 C Cube #3 to Cube #4 D Cube #1 to Cube #3

Answers

The answer should go like...

Cube #1 to Cube #3

Cube #2 to Cube #1

Cube #2 to Cube #4

Cube #4 to Cube #3.

In double replacement reactions, why will two metals not combine with each other when products are formed?.

Answers

When pieces of two ionic compounds are exchanged, creating two new compounds, this reaction is known as a double replacement reaction (also known as a double displacement, exchange, or metathesis reaction).

What is Double Displacement Reaction?

When one reactant is partially replaced by another, the reaction is referred to as a twofold displacement reaction.

Double displacement reactions can be described as follows:

AD = CB + CD + AB

In a double replacement process, the ions in two reactant ionic compounds are exchanged for the same ions in two new product compounds.

When two reactants swap cations or anions to produce two new products, the process is known as a double replacement reaction.

Double displacement reactions and metathesis reactions are other names for double replacement processes.

Double replacement reactions include neutralisation, precipitation, and gas production.

Learn more about Double Displacement Reaction from given link

https://brainly.com/question/23918356

#SPJ4

the atomic mass and abundance of Si-28 is 27.977 amu and 92.2%. The atomic mass and abundance of Si-29 is 28.976 amu and 4.7%. The atomic mass and abundance of Si-30 is 29.974 amu and 3.1%. which is the average atomic mass of silicon?​

Answers

The average atomic mass of silicon has a natural abundance of Si-28 of 92.23% and Si-30 of 3.1%.

If the mass number of an atom of silicon, Si, is 28, how many neutrons does that atom contain?

Because the amount of protons and electrons in a neutral substance is equal, silicon also contains 14 electrons. 28 - 14 protons equals 14 neutrons since the mass number is equal to the sum of the protons and neutrons.

With abundance and amu, how do you determine atomic mass?

Unknown. By dividing by 100, convert each percentage of abundance to a decimal. This value should be multiplied by the isotope's atomic mass. Get the average atomic mass for each isotope by adding everything up.

To know more about mass number visit:-

https://brainly.com/question/4408975

#SPJ1

which type of test should be used to determine if lab 1 is reporting lower cholesterol levels, on average, than lab 2?

Answers

A cholesterol test is a blood test that quantifies your blood's levels of cholesterol and certain fats. Every cell in your body, including the ones that make up your blood, contains cholesterol, a waxy, fatty-like substance.

What are the most common chemistry tests?

Elevated blood ammonia (BUN) and creatinine are measured during kidney function testing, often known as renal panels. Aspartate analyzer (ALT), alkaline phosphatase (ALP), transaminase (AST), bilirubin, albumin, and total protein are all measured in liver function tests.

Why are lab tests necessary?

In patients suffering from viral infections or immunological disorders, scientific tests are particularly helpful in establishing a diagnoses, predicting clinical symptoms, and tracking disease progression. In the management of diseases, timely diagnostic evaluation and the use of accurate tests are crucial.

To know more about Lab test visit:

https://brainly.com/question/2718557

#SPJ4

So if you have a non-coated iron nail in water and the conditions do not change does it rust at the same rate every day. will the weight of the nail change in a constant pattern, for example, the weight of the nail to start would be 5.5 and the end weight would be 6.1 and it sits in the water for 5 days. would the nail gain all 0.6 grams of rust weight in a constant pattern of 0.1

Answers

Check the nails every day for the development of rust. Both the nails submerged in water should rust after three weeks, while the nail submerged in vinegar should rust after about one week.

What do you mean by Rust ?

Rust is a similar coating created on a metal other than iron by corrosion. It is a reddish brittle coating that forms on iron especially when chemically attacked by damp air and is constituted primarily of hydrated ferric oxide.

Rust is a result of the reaction of iron with both air and water. Rust is a powder that forms from the oxygen in the air. Rusting is the process of rust creation. Rust is a reddish-orange flaky material. The metal surface is where rusting is more prone to happen because it is an oxidation process.

To know more about Rust please click here ; https://brainly.com/question/1477535

#SPJ1

Abbreviations along with the explanation are shown. Which set used in chemical equations is correct?
O (g). grams
O (aq), dissolved in water
O (1), liters
O, a gas is evolved

Answers

Answer:

B and D

Explanation:

Answer D, look like you're missing (g) which stands for gas

so answer B (which is aq) and answer D (which is g) are correct.

Grams and litters are not used in the chemical equations but used in calculation of the quantities of reactants and products.

when 0.485 g of compound x is burned completely in a bomb calorimeter containing 3000 g of water, a temperature rise of 0.285°c is observed. what is δu of the reaction for the combustion of compound x? the hardware component of the calorimeter has a heat capacity of 3.81 kj/°c. the specific heat of water is 4.184 j/g·°c. the molar mass of compound x is 56.0 g/mol.

Answers

For 56 g/mol of the compound, change in the internal energy is calculated to be -539 kJ/mol.

What is calorimeter?

Calorimeter is a device that is used to calculate the amount of heat involved in a chemical or physical process.

As, ΔU = Heat of calorimeter + Heat of solution

And we know, Heat = heat capacity * temperature

Given, 0.485 g compound

Then, ΔU  = 3.81  0.285 + 4.184  3000  0.285

so, ΔU = 4.67 kJ

For 56 g/mol,

ΔU =  (energy/ mass) * (moles/1)

ΔU = (4.67/0.485) *56

ΔU = 539 kJ/mol

As there is a rise in temperature in the reaction, therefore the negative sign is given to the internal energy, i.e. -539kJ/mol.

To know more about calorimeter, refer

https://brainly.com/question/2963957

#SPJ4

What are the values of δs for the water, the surroundings, and the universe for the evaporation of water from an open pan at 25°c?.

Answers

The Entropy(ΔS) (water) is positive, and ΔS (surrounding) is negative, Water does evaporate, so the process is spontaneous, which means ΔS (universe) > 0 according to the Second Law of Thermodynamics.

What is Entropy (ΔS)?

The measure of a system's disorder is called entropy. It is a thermodynamic system's extensive attribute, which means that the amount of matter in the system affects how much it is worth. Entropy is typically represented in equations by the letter S and has units of joules per kelvin (J/K1) or (kg/m2/s2K1). Low entropy describes a highly ordered system.

What is the Second law of thermodynamics?

The entropy will either rise or stay the same in every cyclic process, according to the Second Law of Thermodynamics. Entropy, sometimes known as the "direction of time's arrow," provides information on how an isolated system evolves through time. If two separate pictures of the same system show one state that is more disordered than the other, it may be assumed that this state emerged later in time. In the case of an isolated system, the flow of events leads to a state where the system is more disordered or has the higher entropy.

Hence, ΔS (water) is positive, and ΔS (surrounding) is negative, Water does evaporate, so the process is spontaneous, which means ΔS (universe) > 0 according to the Second Law of Thermodynamics.

To know more about Entropy, check out:

https://brainly.com/question/6364271

#SPJ4

Radiation Exposure from Dental X-rays Dental X-rays expose patients to about 5.00 μSv of radiation. 4th attempt Part 1 (I point) Feedback Given an RBE of 1.00 for X-rays, how many micrograys of radiation does 5.00 μSv represent?

Answers

The energy of radiation exposure from dental X-rays per given weight is 272.5 μJ.

The dental assistant can respond to this patient's concerns by telling the patient that the amount of radiation coming from the x-ray is minimal and will have no negative effect.

Given,

mass = 54.5 kg

Radiation = 5 μSv

Now

Energy per kg = 5 μSv *10⁻⁶ Sv / 14 Sv * 1 J/Kg/ 1 Sv

Energy per kg = 5 * 10⁻⁶ J/Kg

Then,

Energy per given weight of 54.5 kg

Energy per given weight = (54.5 kg)*(5*10⁻⁶)

Energy per given weight = 272.5 * 10⁻⁶ J

Therefore, energy of radiation exposure from dental X-rays per given weight is 272.5 μJ.

To know more about Dental X-ray, refer: https://brainly.com/question/29157665

#SPJ4

what is the maximum bond order that is possible for a bond between elements in the first two rows of the periodic table?

Answers

The Mo and W diatoms symbolize the greatest bond order attained between two atoms in the periodic table, which is six.

Can a bond order have more than three bonds?

Bond order is the number of electron bonding pairs that exist between two atoms. A quadruple bond is a form of chemical relationship that involves eight electrons between two atoms. This bond is a variation on the more common double and triple bonds.

The number of bonds that an atom may make is frequently predicted by the number of electrons required to achieve an octet (eight valence electrons); this is notably true .

When three pairs of electrons come together, they create a triple bond.

learn more about W diatoms refer

https://brainly.com/question/1213876

#SPJ4

Vinegar has a concentration of 0.87mol/L acetic acid to make a 100ml solution it is diluted by a factor of 10 how do u find the original volume of vinegar and the concentration of acetic acid in the diluted solution

Answers

To find the original volume of vinegar, we can use the following formula:

Original volume of vinegar = Diluted volume * Dilution factor

In this case, the diluted volume is 100 ml and the dilution factor is 10, so the original volume of vinegar is:

Original volume of vinegar = 100 ml * 10 = 1000 ml

To find the concentration of acetic acid in the diluted solution, we can use the following formula:

Diluted concentration of acetic acid = Original concentration of acetic acid / Dilution factor

In this case, the original concentration of acetic acid is 0.87 mol/L and the dilution factor is 10, so the diluted concentration of acetic acid is:

Diluted concentration of acetic acid = 0.87 mol/L / 10 = 0.087 mol/L

This means that the diluted solution has a concentration of 0.087 mol/L acetic acid.

Please give me brainliest for more high quality answers! - longstretch

If you dissolve 10. 0 g of compound x in 100. 0 ml of distilled water, the liquid turns red. The temperature of the liquid stays at 24 °c for 10 minutes. Why would you not want to sell a cold pack made with compound x?.

Answers

so the company hire company B because it pays not more than 85 cents.

Why would you not want to sell a cold pack made with compound x?

1. Technically it depends upon the temperature of your hand: if we assume the body temperature is 37 C then your hand is warmer than the beaker and the beaker will feel cold.

2. This is an endothermic reaction.

3.  If the beaker changes from 25 C to 5 C the energy is lower.

1.5g x (20/5) = 6.0 grams.

Cost of 6.0 g is

$184.04 x (6.0/1000) = about $1.10 each.

its cost = 110 cents

Compound B the same way.

1.0g x (20/2.5) = 8.0 grams.

Cost of 8.0 g is

$97.13 x (8.0/1000) = about $0.777 each.

its cost 77.7 cents.

so the company hire company B because it pays not more than 85 cents.

To know more about endothermic reaction, check out:

https://brainly.com/question/1447631

#SPJ4

a ph of 7.20 is slightly alkaline, yet a blood ph of 7.20 is called acidosis. why do you think it is called this?

Answers

As the normal pH of blood is around 7.35, a lower pH of 7.20 is considered to be an indicator of acidosis.

For the normal metabolic function of the human body, the pH of the blood in the arteries is maintained between 7.35 and 7.45 through a complex feedback system between the various systems.

Acidosis occurs when an excess of Carbonic acid formed due to the reaction of carbon dioxide with water, is present in the body. The two main organs responsible for maintaining the pH are the kidneys and lungs. Even though a pH of 7.2 is normally considered alkaline, it is acidic relative to the normal pH of the blood.

To learn more about pH :

https://brainly.com/question/12609985

How many grams of PbSO4 would
be produced from the complete
reaction of 23.6 g PbO2?
Pb+ PbO2 + 2H2SO4
PbO2: 239.2 g/mol
PbSO4: 303.27 g/mol

2PbSO4 + 2H2O
{? ] g PbSO4

Answers

One mole or 239.2 g of PbO₂ or 239.2 g gives two moles or 606.5  of lead sulphate. Thus, 23.6 g of lead oxide will give 59.84 g of lead sulphate.

What is lead oxide?

Lead oxide is an ionic compound formed by the ionic bonding between the transition metal lead and oxygen by losing two electrons from lead to oxygen. It reacts with sulphuric acid giving lead sulphate PbSO₄.

As per the given balanced reaction, one mole of lead oxide gives two moles of lead sulphate.

Molar mass of PbO₂ = 239.2 g/mol

Molar mass of  PbSO₄ = 303.27 g/mol

2 moles of  PbSO₄ = 2 × 303.27  = 606.54 g.

Thus, 239.2 g of lead oxide gives 606.54 g of PbSO₄. The mass of PbSO₄ produced from 23.6 g of lead oxide is:

= (23.6 × 606 .54 )/ 239.2 g

= 59.84 g.

Therefore, the mass of PbSO₄ produced from 23.6 g of PbO2 is 59.84 g.

To find more on lead oxide, refer here:

https://brainly.com/question/13264277

#SPJ1

if there were any other acids other than acetic acid present in vinegar, how would this affect your results

Answers

It would be challenging to calculate the percentage of simply acetic acid in vinegar if other acids were also present since they would mix with it.

Describe acid.

A chemical that creates salts when it combines with specific metals while also releasing hydrogen atoms into water. Acids have a sour taste and give some colors, a reddish tint. Acids generated by the body, such stomach acid, can assist organ function. One type of acid is hydrochloric acid.

Where does acid come from?

For instance, they can be used as an essential component in the chemical industry, like an electrolyte in a wet-cell battery (like a car battery), and to remove rust from metals.

To know about acid visit:

https://brainly.com/question/1512259

#SPJ4

How many grams of CO would be
required to generate 635 g CO2?
Fe2O3 + 3CO → 2Fe + 3CO2
CO: 28.01 g/mol
CO2: 44.01 g/mol
[?] g CO₂

Answers

404.14 grams of CO will be needed to produce 635 g of CO₂ in this scenario.

The definition of stoichiometric co-efficient.

The stoichiometric coefficient is the number put in front of the atoms, ions, and molecules in a chemical reaction to balance the amount of each element on the reactant and product sides of the equation.

In most cases, it is favorable for products and unfavorable for reactants. The stoichiometry of a chemical reaction is determined by stoichiometric coefficients.

Let's start by obtaining the reaction's equation:

The given reaction: Fe₂O₃ + 3CO → 2Fe + 3CO₂

We can see from the equation that the mole ratio of CO to CO2

The mole ratio of CO to that of CO₂= 3:3

The mole ratio of CO to that of CO₂= 1:1

Given that,

635 g of CO₂ is to be generated.

Mole of 635 g CO₂ = mass/molar mass = 635/44.01 = 14.43 moles

Thus, the equivalent mole of CO required will also be 14.43 moles.

Mass of 14.43 moles of CO = moles x molar mass

Mass of 14.43 moles of CO = 14.43 x 28.01

Mass of 14.43 moles of CO = 404.14 gm.

To produce 635 g of CO2, 404.14 gm of CO will therefore be needed.

To know more about Fe₂O₃ visit:

https://brainly.com/question/8993935

#SPJ1

s the electrical conductivity of carbonated water better than, worse than or similar to the electrical conductivity of pure water?

Answers

A poor conductor of electricity is pure water. The electric conductivity of regular distilled water is around 10 times when it is in equilibrium with atmospheric carbon dioxide.

Does carbonated water have more conductivity?

On the other hand, it was discovered that different types of water had significantly varying conductivities, which indicate the overall amount of dissolved solids. And as predicted, pure water had the lowest conductivity while carbonated water had the greatest.

Does carbonation affect conductivity in any way?

When the graphene content is less than 2.0%, it is discovered that electrical conductivity increases with increasing carbonation depth. In this instance, the cement matrix, which can be improved by carbonation product through filling pores, determines the electrical conductivity of the composite.

To know more about electric conductivity visit:-

https://brainly.com/question/5759256

#SPJ4

at constant temperature and pressure, 5.0 l of so2 is combined with 3.0 l of o2 according to the equation: 2 so2(g) o2(g) --> 2 so3(g) after the so3 formation is complete, what is the volume of the mixture?.

Answers

The volume of the mixture is 5 L

What is limiting reagent ?

The limiting reagent is the one that is completely consumed during a reaction. Reagents that are entirely consumed by a chemical reaction are known as limiting reagents. They are additionally known as limiting reactants or limiting agents.

Reactants in a chemical reaction are referred to as surplus reagents if they are still present at the end of the reaction. Because its quantity restricts the number of products that can be generated, the reagent that is totally consumed or reacted is known as the limiting reagent.

We should first use the mole ratio, and SO 2 as the limiting reagent .

That would yield 5.0 L or 2 moles of SO3, but that is not one of your options. Since the temperature and pressure are both constant, the volume is equal to the number of moles since n/v = p/rt.

TO know more about mole concept you may visit the link:

https://brainly.com/question/22540912

#SPJ4

Other Questions
T/F In the past it was common for the marketing function and PR function to be handled by different departments in a firm. Consider the following incomplete code: public class Test { public static void main(String[] args) { System.out.println(f(5)); } public static int fint number) { // Missing body } } The missing method body should be A) return "number"; B) System.out.println(number); C) System.out.println("number"); D) return number; Elian is placing a rectangle in the coordinate plane. He knows that the shorter side of the rectangle is half the length of the longer side. He places the longer side on the x-axis. What coordinates should he assign to the top-left vertex of the rectangle? enter your answer in the boxes. ( , ). Why would the majority of volcanoes and earthquakes be found on or around plate boundaries all of the following terms are generally associated with the definition of corporate social responsibility except In Scene 4 Anne describes the first thing each of the people in the secret annex would like to do after getting out of the hidden quarters. If you were free after many months of hiding, what would be the first thing you would like to do? WHY? What value of x is in the solution set of the inequality 9(2x + 1) < 9x 18? Joshua earns $.50 for each delivery he makes plus an additional $10.00 per day. Write and solve an inequality to represent the number of packages Joshua has to deliver so that he can make more than $20.00 each day. In paragraph 4, how does the author use flashback?A to create tensionB to create mysteryC to create a humorous toneDto create a mood of nostalgia Please select the word from the list that best fits the definition. smoking contributes to air pollution.a. Too narrowb. Too broadc. Just right if the gametes of a flamingo contains 15 chromosomes how many chromosomes would normally be present in the bone cells of a flamingo You will now gather and evaluate sources. Complete the table below with source information, type, and evidence relevantto your research paper. Refer to page three of the Research Project Planning Guide. Be sure to print or save a copy to beaccessed and developed throughout the unit. A roller-coaster goes over an 13 m tall hill then approaches a 26 m hill. What is the minimum velocity the roller-coaster would need when going over the 13 m hill to make it to the top of the 26 m hill? A player spins two spinners. The outcome of each spinner is 1, 2, or 3. Each outcome isequally likely. Define the random variable X to be the maximum of the two numbers on thespinners. What is E[X]? An oven with a convection setting has a fan and vent system that keeps air moving around inside of the oven. Conventional ovens do not have this type of system. Joelle claims that convection ovens cook food more quickly and evenly.A) Construct an explanation for this claimB) suggest how you could test this claim and support your explanation. Which variables would you control? If a strike will endanger the safety andhealth of the United States, managementmay seek which of the following legaldevices?O MediationO InjunctionO SanctionO Permit an agitated client diagnosed with schizophrenia and the client's family arrive in the psychiatric unit for admission. which action should the nurse perform first? 7. The population of Ludwigville has been steadily declining by 15% each year. If this trend continues, and the population is now 5,000 , what will the population be 12 years from now?A. 711B. 0C. 4250D. 42898. Evaluate e, Round to the nearest ten thousandth.A. 147.9068B. 148.1236C. 149.4200D. 148.41329. Simplify 6e (8e)/12eA. 4eB. 4eC. 36eD. 2e What role does gravity play in the orbit of planets? Find the:Domain:Range:Local maximum:Local minimum:Increasing interval:Decreasing interval:Constant interval: