Answer:
1) The time it takes the diver to move off the end of the diving board to the pool surface, [tex]t_w[/tex], is approximately 1.392 seconds
2) The horizontal distance from the edge of the pool to where the diver enters the water, [tex]d_w[/tex], is approximately 5.76 meters
Explanation:
1) The given parameters are;
The height of the diving board above the pool's surface, h = 9.5 m
The length by which the diving board over hangs the pool L = 2 m
The speed with which the diver runs horizontally along the diving board, v₀ = 2.7 m/s
Taking [tex]t_w[/tex] = The time it takes the diver to move off the end of the diving board to the pool surface
Therefore, we have from the equation of free fall;
h = 1/2 × g × [tex]t_w[/tex]²
Where;
g = The acceleration due to gravity = 9.81 m/s²
Substituting the values, gives;
9.5 = 1/2 × 9.81 × [tex]t_w[/tex]²
[tex]t_w[/tex] = √(9.5/(1/2 × 9.81)) ≈ 1.392 s
The time it takes the diver to move off the end of the diving board to the pool surface = [tex]t_w[/tex] ≈ 1.392 s
2) The horizontal distance, [tex]d_w[/tex], in meters from the edge of the pool to where the diver enters the water is given as follows;
[tex]d_w[/tex] = L + v₀ × [tex]t_w[/tex] = 2 + 2.7× 1.392 ≈ 5.76 m
∴ The horizontal distance from the edge of the pool to where the diver enters the water ≈ 5.76 meters.
Silver has a mass of 10.5 grams and a volume of 19.3 cm3. What is its density?
Answer:
The answer is 0.54 g/cm³Explanation:
The density of a substance can be found by using the formula
[tex]density = \frac{mass}{volume} \\ [/tex]
From the question we have
[tex]density = \frac{10.5}{19.3} \\ = 0.54404145...[/tex]
We have the final answer as
0.54 g/cm³Hope this helps you
I WILL GIVE BRAINLIEST!!!
The Earth's diameter at the equators is ____ its diameter at the poles.
equal to
less than
greater than
41. A statue weighs 1,000N and exerts a pressure of 20,000 Pa. How big is
the base of the statue in square meters?
please help
Answer:
The answer is 0.05 m²Explanation:
The area of the base of the statue can be found by using the formula
[tex]a = \frac{f}{p} \\ [/tex]
f is the force
p is the pressure
From the question we have
[tex]a = \frac{1000}{20000} = \frac{1}{20} \\ [/tex]
We have the final answer as
0.05 m²Hope this helps you
A dart is thrown horizontally at a target's center that is 5.00\,\text m5.00m5, point, 00, start text, m, end text away. The dart hits the target 0.150\,\text m0.150m0, point, 150, start text, m, end text below the target's center.What was the initial horizontal velocity of the dart?
Answer:
Explanation:
Given
the range = 5.00m (distance moved in horizontal direction)
Height = 0.150m
Required
Initial velocity of the dart
Using the formula for calculating range of a projectile;
R = U√2H/g
5 = U√2(0.15)/9.8
5 = U√0.0306
5 = 0.1749U
U = 5/0.1749
U = 28.59m/s
Hence the initial horizontal velocity of the dart is 28.59m/s
Answer:
28.59
Explanation:
khan academy
What must follow the division of the nucleus to complete the process of binary fission
Answer:
Replication of the DNA must occur. Segregation of the "original" and its "replica" follow. Cytokinesis ends the cell division process. Whether the cell was eukaryotic or prokaryotic, these basic events must occur.
40 POINTS!
A 2,200 kg SUV is traveling at 25 m/s. What is the magnitude of its momentum?
A. 55,000 kg·m/s
B. 550 kg·m/s
C. 2,200 kg·m/s
D. 88 kg·m/s
Answer:55,000 kg•m/s
Explanation:
What two factors are a part of thermohaline circulation
Answer:
These deep-ocean currents are driven by differences in the water's density, which is controlled by temperature (thermo) and salinity (haline). This process is known as thermohaline circulation.
Explanation:
can a chemical change be undone?
Answer:
no
Explanation:
because it will bind together in the molecular level
A system has both thermal energy and chemical potential energy. According
to the law of conservation of energy, which statement describes the total
energy of this system?
O A. It will decrease over time as chemical potential energy is
transformed into thermal energy.
B. It will decrease as thermal energy is transferred out of the system.
C. It will remain constant because the total amount of thermal energy
plus chemical potential energy stays the same.
OD. It will increase as thermal energy is created from chemical
potential energy
Answer:
C. It will remain constant because the total amount of thermal energy plus chemical potential energy stays the same.
Explanation:
According to the law of conservation of energy, the total energy of this system will remain constant because the total amount of thermal energy plus chemical potential energy stays the same.
The law of conservation of energy states that "energy is neither created nor destroyed in system but transformed from one form to another". Total energy in a system will always be conserved. It will remain constant.An insulated rigid tank initially contains 1.4-kg saturated liquid water and water vapor at 200°C. At this state, 25 percent of the volume is occupied by liquid water and the rest by vapor. Now an electric resistor placed in the tank is turned on, and the tank is observed to contain saturated water vapor after 20 min. Determine:
(a) the volume of the tank
(b) the final temperature
(c) the electric power rating of the resistor
Solution:
Mass of liquid water and water vapor in the insulated tank initially = 1.4 kg
Temperature = 200 °C
And 25% of the volume by liquid water is steam.
State 1
[tex]$m=\frac{V}{v}$[/tex]
[tex]$m=m_f+m_g$[/tex]
[tex]$1.4=\frac{0.25V}{v_f}+\frac{0.75V}{v_g}$[/tex]
[tex]$1.4=\frac{0.25V}{1.1565 \times 10^{-3}}+\frac{0.75V}{0.1274}$[/tex] (taking the value of [tex]$v_g$[/tex] and [tex]$v_g$[/tex] at 200°C )
[tex]$V=6.304 \times 10^{-3}$[/tex]
Now quality of vapor
[tex]$x=\frac{m_g}{m}$[/tex]
[tex]$=3.377 \times 10^{-3}$[/tex]
Internal energy at state 1 can be found out by
[tex]$u_1=u_f+xu_{fg}$[/tex]
[tex]$=850.65+3.377\times10^{-3}\times 1744.65$[/tex]
= 856.54 kJ/kg
After heating with the resistor for 20 minutes, at state 2, the tank contains saturated water vapor [tex]$v_2=v_g \text { and }\ x=1$[/tex]
Tank is rigid, so volume of tank is constant.
[tex]$v_g=v_2=\frac{V}{m}$[/tex]
[tex]$v_g=\frac{6.304\times 10^{-3}}{1.4}$[/tex]
[tex]$v_g=4.502 \times 10^{-3} \ m^3 /kg$[/tex]
Now interpolate the value to get temperature at state 2 with specific volume value to get final temperature
[tex]$T_2=360+(374.14-360)\left(\frac{0.004502-0.006945}{0.003155-0.006945}\right)$[/tex]
= 369.11° C
Internal energy at state 2
[tex]$u_2=2154.9 \ kJ/kg$[/tex]
Now power rating of the resistor
[tex]$P=\frac{m(u_2-u_1)}{t}$[/tex]
[tex]$P=\frac{1.4(2154.9-856.54)}{20 \times 60}$[/tex]
= 1.51 kW
Please help I will give brainliest
Answer:
ask questions that the findings bring up
Explanation:
hope this helps :)
Answer:
ask questions that the findings bring up
Which reaction is an acid-base neutralization reaction?
A. Mg + 2HCl → MgCl2 + H2
B. HCl + NaOH → NaCl2 + H2O
C. SiCl4 → Si2 + 2Cl2
D. N2 + 3H2 → 2NH3
Answer:
option B is correct
Explanation:
neutralization is the reaction between acid and base to produce water and salt therefore option B is correct
!!ill give brainliest!
Explain why !
PLEASE HELP ME QUICKLY!!!!!!!!!!!!!!
Answer:
I think thats the correct answer
Explanation:
4. Describe the forces acting on a softball after it leaves the pitcher's hand. Ignore the effects of
air resistance.
Answer:
Drag, which is a force preventing the ball from going faster than it was thrown, this increases as velocity increases. Gravity, which Is pulling down on the ball.
Explanation:
A box sitting still on the ground by itself has a Normal Force of 700N, what is the mass? (gravity’s acceleration is 9.80 m/s²)
Answer:
Mass, m = 71.42 kg
Explanation:
Given that,
Normal force acting on a box, F = 700 N
We need to find the mass of a box. Let it is m. Normal force acting on an object is balanced by its weight such that,
F = mg
Where m is the mass of the box
[tex]m=\dfrac{F}{g}\\\\m=\dfrac{700\ N}{9.8\ m/s^2}\\\\m=71.42\ kg[/tex]
So, the mass of the box is 71.42 kg.
A stone is thrown at an angle of 34.0° above the horizontal from the top edge of a cliff with an initial speed of 18.3 m/s. A stopwatch measures the stone's trajectory time from the top of the cliff to the bottom at 2.6 s. What is the height of the cliff?
Answer:
Explanation:
Using the formula for calculating the maximum height in projectile
H = u²sin²theta/2g
u is the initial velocity = 18.3m/s
g is the acceleration due to gravity = 9.8m/s²
theta = 34°
Substitute
H = u²sin²theta/2g
H = 18.3²(sin34)²/2(9.8)
H = 334.89(0.5592)²/19.62
H = 5.337m
Hence the height of the cliff is 5.337m
What is another name for an alpha particle? Include the atomic number and mass number
Answer:
Alpha particles are Helium nuclei consisting of 2 protons and two neutrons (mass number 4, atomic number 2, no electrons and so carry a 2+ charge).
Explanation:
A student determines the density ρ of steel by taking measurements from a steel wire
Mass- 6.2 +-0.1g
Length- 25.0 +-0.1m
Diameter- 2.00 +-0.01mm
He uses the equation ρ= 4m/πd^2l
What is the percentage uncertainty in his calculated value of density ?
Answer:
The percentage uncertainty in his calculated value of density is [tex]\pm 0.713\,\%[/tex].
Explanation:
We can estimate the absolute uncertainty by the definition of total differential. That is:
[tex]\Delta \rho \approx \frac{\partial \rho}{\partial m}\cdot \Delta m + \frac{\partial \rho}{\partial d}\cdot \Delta d + \frac{\partial \rho}{\partial l}\cdot \Delta l[/tex] (1)
Where:
[tex]\frac{\partial \rho}{\partial m}[/tex] - Partial derivative of the density with respect to mass, measured in [tex]\frac{1}{mm^{3}}[/tex].
[tex]\frac{\partial \rho}{\partial d}[/tex] - Partial derivative of the density with respect to diameter, measured in grams per cubic milimeter.
[tex]\frac{\partial \rho}{\partial l}[/tex] - Partial derivative of the density with respect to length, measured in grams per cubic milimeter.
[tex]\Delta m[/tex] - Mass uncertainty, measured in grams.
[tex]\Delta d[/tex] - Diameter uncertainty, measured in milimeters.
[tex]\Delta l[/tex] - Length uncertainty, measured in milimeters.
[tex]\Delta \rho[/tex] - Density uncertainty, measured in grams per cubic milimeters.
Partial derivatives are, respectively:
[tex]\frac{\partial \rho}{\partial m} = \frac{4}{\pi\cdot d^{2}\cdot l}[/tex] (2)
[tex]\frac{\partial \rho}{\partial d} = -\frac{8\cdot m}{\pi\cdot d^{3}\cdot l}[/tex] (3)
[tex]\frac{\partial \rho}{\partial l} = - \frac{4\cdot m}{\pi\cdot d^{2}\cdot l^{2}}[/tex] (4)
And we expand (1) as follows:
[tex]\Delta \rho \approx \frac{4\cdot \Delta m}{\pi\cdot d^{2}\cdot l} - \frac{8\cdot m\cdot \Delta d}{\pi\cdot d^{3}\cdot l}-\frac{4\cdot m\cdot \Delta l}{\pi\cdot d^{2}\cdot l^{2}}[/tex]
[tex]\Delta \rho \approx \left(\frac{4}{\pi\cdot d^{2}\cdot l}\right)\cdot \left(\Delta m -\frac{m\cdot \Delta d}{d}-\frac{m \cdot \Delta l}{l} \right)[/tex] (5)
If we know that [tex]d = 2\,mm[/tex], [tex]l = 25\,mm[/tex], [tex]m = 6.2\,g[/tex], [tex]\Delta m = \pm 0.1\,g[/tex], [tex]\Delta d = \pm 0.01\,mm[/tex] and [tex]\Delta l = \pm 0.1\,mm[/tex], then the absolute uncertainty is:
[tex]\Delta \rho \approx \pm\left[\frac{4}{\pi\cdot (2\,mm)^{2}\cdot (25\,mm)} \right]\cdot \left[(0.1\,g)-\frac{(6.2\,g)\cdot (0.01\,mm)}{2\,mm} -\frac{(6.2\,g)\cdot (0.1\,mm)}{25\,mm} \right][/tex]
[tex]\Delta \rho \approx \pm 5.628\times 10^{-4}\,\frac{g}{mm^{3}}[/tex]
And the expected density is:
[tex]\rho = \frac{4\cdot m}{\pi\cdot d^{2}\cdot l}[/tex] (6)
[tex]\rho = \frac{4\cdot (6.2\,g)}{\pi\cdot (2\,mm)^{2}\cdot (25\,mm)}[/tex]
[tex]\rho \approx 78.941\times 10^{-3}\,\frac{g}{mm^{3}}[/tex]
The percentage uncertainty in his calculated value of density is:
[tex]\%e = \frac{\Delta \rho}{\rho}\times 100\,\%[/tex] (7)
If we know that [tex]\Delta \rho \approx \pm 5.628\times 10^{-4}\,\frac{g}{mm^{3}}[/tex] and [tex]\rho \approx 78.941\times 10^{-3}\,\frac{g}{mm^{3}}[/tex], then the percentage uncertainty is:
[tex]\%e = \frac{\pm 5.628\times 10^{-4}\,\frac{g}{mm^{3}} }{78.941\times 10^{-3}\,\frac{g}{mm^{3}} }\times 100\,\%[/tex]
[tex]\%e = \pm 0.713\,\%[/tex]
The percentage uncertainty in his calculated value of density is [tex]\pm 0.713\,\%[/tex].
what do humming birds eat? and how do they get their food?
help pls!!! this is worth 30 points, can someone pls help even if u can only give a few answers it would be helpful.
Answer:
1. potential 2. kinetic 3. potential 4. kinetic 5. kinetic 6. kinetic 7. kinetic 8. kinetic. potential
how we will solve this question?
36.45cL=______=μL
Answer:
0.364
I believe... Good luck!
Newton's first law of motion states than an object's motion will not change
unless?
Answer:
it is hit by an external force
Explanation:
5,000 joules of thermal energy were applied to 1-kg aluminum bar. What was the temperature increase?
Answer:
ΔT = 4.9°C
Explanation:
The thermal energy of the bar can be given as follows:
Thermal Energy = mCΔT
where,
m = mass of bar = 1 kg
C = specific heat capacity of aluminum = 1020 J/kg.°C
ΔT = Change in Temperature = ?
Therefore,
5000 J = (1 kg)(1020 J/kg.°C)ΔT
ΔT = (5000 J)/(1020 J/°C)
ΔT = 4.9°C
Grade 8 Science Admin. May 2018 Released
37 A physics teacher performed a demonstration for a science class by pulling a crate across the
floor and measuring the force with a spring scale. While she pulled, a student measured the
acceleration of the crate with a handheld electronic device. The results of three trials are
shown below
Motion
F = 900 N
Actual Acceleration
of Crate
Trial
1
140 kg
Acceleration
(m/s)
0.36
0.34
0.38
0.36
2
3
Average
The teacher asked the class to calculate the acceleration of the crate based on the crate's
mass and the force she applied. What conclusion can be made about the difference between
the calculated acceleration and the actual acceleration that occurred in the trials?
A Another force in the direction of the motion produced a lower acceleration than calculated.
B An opposing force caused by friction produced a lower acceleration than calculated.
C Another force in the direction of the motion produced a higher acceleration than
calculated.
D An opposing force caused by friction produced a higher acceleration than calculated,
Answer:
B. An opposing force caused by friction produced a lower acceleration than calculated
Explanation:
Answer:
An opposing force caused by friction produced a lower acceleration than calculated.
Explanation:
a car starts from rest and accelerates to a speed of 30 m/s in a time of 3 seconds. the average acceleration of the car is
Answer:
10m/s²
Explanation:
v=u+at
30=0+a(3)
∴a=10m/s²
Answer:
10m/s^2. Just curious, what kind of car is it? Is it a lamborghini
Explanation:
Gravitational potential energy is potential energy based on what?
a. temperature
b.height
c. length
d. volume
Answer:
Height
Explanation:
the more height the more gravitational energy
Hand washing is important especially in this time of pandemic
Which two staments explain how a cell's parts help it get nutrients
Answer:
I think it's A and D.
what is an isoelectronic series
Answer:
A comparison of the dimensions of atom an ions that have the same number of electron but different nuclear charges is called isoelectronic series
Answer:
A comparison of the dimensions of atoms or ions that have the same number of electrons but different nuclear charges, called an isoelectronic series, shows a clear correlation between increasing nuclear charge and decreasing size