Answer:
E = 7.11 × [tex]10^{-7}[/tex] Cal
Explanation:
given data
efficiency = 25 %
solution
first we get here E by the power that is express as
p = [tex]\frac{E}{t}[/tex] ...........1
E = p × t
E = 1 × 2 × [tex]\frac{1hp}{746w} \times \frac{1hr}{3600 s}[/tex]
E = 7.447 × [tex]10^{-7}[/tex] J
and
Ein is get by efficiency
Ein = [tex]\frac{Eout}{\eta }[/tex] ..................2
Ein = [tex]\frac{7.447 \times 10^{-7}}{.25 }[/tex]
Ein = 29.788 × [tex]10^{-7}[/tex] J
so required energy is
E = 29.788 × [tex]10^{-7}[/tex] × [tex]\frac{1Cal}{4.184J}[/tex]
E = 7.11 × [tex]10^{-7}[/tex] Cal
Dribbling a basketball harder into the floor makes it bounce higher is an example of what newton's law?
Number
850095
Scientific
Notation
0-2
What is the scientific notation to 850095? Is it 8.5 x10^4
Answer:
8.50095 x 10^5
Explanation:The purpose of scientific notation is for scientists to write very large, or very small, numbers with ease.
Calculating scientific notation for a positive integer is simple, as it always follows this notation:
a x 10b
Follow the steps below to see how 850,095 is written in scientific notation.
Step 1
To find a, take the number and move a decimal place to the right one position.
Original Number: 850,095
New Number: 8.50095
Step 2
Now, to find b, count how many places to the right of the decimal.
New Number: 8 . 5 0 0 9 5
Decimal Count: 1 2 3 4 5
There are 5 places to the right of the decimal place.
Step 3
Building upon what we know above, we can now reconstruct the number into scientific notation.
Remember, the notation is: a x 10b
a = 8.50095
b = 5
Now the whole thing:
8.50095 x 105
Step 4
Check your work:
105 = 100,000 x 8.50095 = 850,095
The substance krypton has the following properties normal melting point 115.9 K normal boiling point: 119.8 K triple point: 0.72 atm. 115.8 K critical point: 54.3 atm. 209.4 K A sample of krypton at a pressure of 1.00 atm and a temperature of 149.2 K is cooled at constant pressure to a temperature of 107.8 K Which of the following are true?
a) The final state of the substance is a solid
b) One or more phase changes will occur
c) The final state of the substance is a liquid
d) The sample is initially a gas
e) The solid initially present will vaporize.
Answer:
B. One or more phase change occur
C. the final state of substance is liquid
D. the sample initially gas
Explanation:
The pressure p = 1.00 atm
The temperature t = 149.2K
The temperature > 119.8K
119.8K being the normal boiling point.
This shows that the krypton is a gas
After it has cooled the pressure = 1.00 atm
The temperature T dropped to 107.8K
T < 115.9K
The melting point has been put as 115.9K
This is a liquid. The final state of the substance is a liquid. Since the temperature is less than the melting point and the pressure is 1.00 atm
.What type of energy includes both kinetic and potential energy?
Answer:
mechanical energy
Explanation:
To convert between units, you need to know the relationship between units. For example, one mile equals 5280 feet. This relationship can now be used as a conversion factor, set up as required by the question. For each conversion, choose the correct arrangement of the conversion factor and complete the calculation 1. Convert 7860 feet to miles 7860 feet x (A)
A: 1 mile
B: 5280 feet 7860 feet miles 2. Co 0.5 miles to feet 0.565 miles x (C) TD
C: Choose...
D: Choose 0.565 miles feet
Answer:
1. 7860 Feet = 1.488 miles
A= 1
B= 5280
2. 0.565 miles = 2983.2 feet
C= 0.565
D= 1
Explanation:
1. Convert 7860 feet to miles
1 miles= 5280 feet
1 Feet= 1/ 5280 miles
7860 Feet= 7860 ( 1/ 5280) miles
7860 Feet = 1.488 miles
A= 1
B= 5280
2. Convert 0.565 miles to feet
1 mile= 5280 feet
0.565 miles = 5280 feet * (0.565/1)
0.565 miles = 2983.2 feet
C= 0.565
D= 1
We see that when we have to convert feet into miles we divide the number by 5280 because feet are smaller than miles. Similarly when we have to convert miles into feet we multiply by the given number because miles are greater than feet.
The above method used is called the unitary method but we should always keep in mind that conversion from smaller to bigger units require divsion and from bigger to smaller units require multiplication.
7.
Use the reaction below for the reaction of dicyanoacetylene with
ozone to produce carbon monoxide and nitrogen.
3C4N2(8) + 403(g) → 1200(8) + 3N2(g).
What volume of CO is produced when 1.20 L of C4N2 reacts?
a 0.300 L CO
b 3.60 L CO
C 14.4 L CO
d 4.80 L CO
Answer:
D
Explanation:
The volume of carbon monoxide is produced when 1.20 L of dicyanoacetylene reacts is
What is stoichiometry?Stoichiometry of any reaction tells about rhe relative amount of substance present before and after the completion of any chemical reaction.
Given balanced chemical reaction between dicyanoacetylene and ozone to produce carbon monoxide and nitrogen is:
3C₄N₂ + 4O₃ → 12CO + 3N₂
From the stoichiometry of the reaction it is clear that:
3 liters of C₄N₂ = produces 12 liters of CO
1.20 liters of C₄N₂ = produces 12/3×1.20=4.8 liters of CO
Hence option (d) is correct i.e. 4.8 liters.
To know more about stoichiometry, visit the below link:
https://brainly.com/question/16060199
What is the coefficient, subscript for V, and subscript for O in V2O5
Answer: Coefficient 0
subscript for V 2
subscript for O 5
Explanation: yes
There is no coefficient in V₂O₅ and the subscript of vanadium V is 2 and the subscript of oxygen is 5.
What is vanadium pentoxide ?Vanadium pentoxide is an ionic compound formed by donating electrons from the vanadium metal to oxygen. The chemical formula of vanadium pentoxide is V₂O₅.
The chemical formula of a compound is written in terms of the chemical symbol of each constituent elements and the number of their atoms. The number of atoms is written as subscript for the chemical symbols.
In V₂O₅, there are are 2 vanadium atoms and 5 oxygen atoms. Coefficients are numbers prior to the formula in reaction. Here there is no coefficient and the subscript for V is 2 and that of O is 5.
Find more on chemical formula:
https://brainly.com/question/29031056
#SPJ2
How many grams of Fe will be produced if 705.0g of H20 are produced?
Fe3O4 + 4H2
-->
3 Fe + 4H2O
2265 g Fe₃O₄
General Formulas and Concepts:Math
Pre-Algebra
Order of Operations: BPEMDAS
Brackets Parenthesis Exponents Multiplication Division Addition Subtraction Left to RightChemistry
Atomic Structure
Reading a Periodic TableStoichiometry
Using Dimensional AnalysisExplanation:Step 1: Define
[RxN - Balanced] Fe₃O₄ + 4H₂ → 3Fe + 4H₂O
[Given] 705.0 g H₂O
Step 2: Identify Conversions
[RxN] 4 mol H₂O → 1 mol Fe₃O₄
Molar Mass of H - 1.01 g/mol
Molar Mass of O - 16.00 g/mol
Molar Mass of Fe - 55.85 g/mol
Molar Mass of H₂O - 2(1.01) + 16.00 = 18.02 g/mol
Molar Mass of Fe₃O₄ - 3(55.85) + 4(16.00) = 231.55 g/mol
Step 3: Convert
Set up stoich: [tex]\displaystyle 705.0 \ g \ H_2O(\frac{1 \ mol \ H_2O}{18.02 \ g \ H_2O})(\frac{1 \ mol \ Fe_3O_4}{4 \ mol \ H_2O})(\frac{231.55 \ g \ Fe_3O_4}{1 \ mol \ Fe_3O_4})[/tex]Multiply/Divide/Cancel units: [tex]\displaystyle 2264.74 \ g \ Fe_3O_4[/tex]Step 4: Check
Follow sig fig rules and round. We are given 4 sig figs.
2264.74 g Fe₃O₄ ≈ 2265 g Fe₃O₄
How is thermal energy transferred during conduction? Check all that apply.
Thermal energy is transferred between particles that are not touching each other.
Thermal energy is transferred between particles that are in direct contact with each other.
Thermal energy is transferred between objects of different temperatures.
Themal energy is transferred between objects of the same temperature.
Themel energy is transferred from slow-moving particles to fast-moving particles.
Themal energy is transferred from fast-moving particles to slow-moving particles, .
Answer:
Option 2, 3, and also 6 btw
Explanation:
The other guy was wrong
What is CaF2(aq) + Rb
Answer:
RbF2 + Ca
Explanation:
Since Rb is located in IIA as well as Ca, Rb has ion form Rb2+
Hence CaF2 + Rb → RbF2 +Ca
Please be reminded, this answer may not be 100% correct
What is the SI unit for force?
Answer: The SI unit of force is the newton, symbol N.
Explanation:
Answer:
the SI unit of force is newton
GIVING 100 PTS EASY SCIENCE PLS HELP
Answer:
Hello there!
I believe the answer you are looking for is A!
Explanation:
It makes sense to me more than the other answer choices.
have a nice day
How many moles are in 4.3 x 10 ^22 molecules of Na3PO4
Answer:
0.071 moles of Na₃PO₄ .
Explanation:
Given data:
Number of molecules of Na₃PO₄ = 4.3× 10²² molecules
Number of moles = ?
Solution:
1 mole contain 6.022 × 10²³ molecules
4.3× 10²² molecules × 1 mol / 6.022 × 10²³ molecules
0.71× 10⁻¹ mol
0.071 mol
The number 6.022 × 10²³ is called Avogadro number.
"It is the number of atoms , ions and molecules in one gram atom of element, one gram molecules of compound and one gram ions of a substance"
Water with a flowrate of 1 m3/min and benzene concentration of 150 mg/L flows through a 10 meter long, 0.1 m diameter steady state and conservative PFR, after which it is fed into a CMFR with a volume of 100 m3. A second water stream with a flowrate of 0.5 m3/min and benzene concentration of 150 mg/L is also fed into the CMFR. The CMFR is steady state and conservative. Calculate the effluent concentration of the CMFR.
Answer:
the effluent concentration of the CMFR is 150 mg/L
Explanation:
Given that;
flowrate of first water Q₁ = 1 m³/min
benzene concentration C₁ = 150 mg/L
flowrate of second water Q₂ = 0.5 m3/min
benzene concentration C₂ = 150 mg/L
To Calculate the effluent concentration of the CMFR, we use the expression;
[tex]C_{effluent}[/tex] = (Q₁C₁ + Q₂C₂) / Q₁ + Q₂
we substitute
[tex]C_{effluent}[/tex] = (1 × 150 + 0.5 × 150) / 1 + 0.5
[tex]C_{effluent}[/tex] = 225 / 1.5
[tex]C_{effluent}[/tex] = 150 mg/L
Therefore, the effluent concentration of the CMFR is 150 mg/L
What happens to water when it changes to ice
Answer:The atoms cool down and become slower and their bonds become close and they move less.
Explanation:I took science
Which of the following is NOT a factor in how much voltage is produced by a
generator?
How fast the magnet in the generator is moving through the coiled wire
How many amps are run through the electromagnet of the generator
How strong the magnet in the generator actually is
How many times the wire is coiled in the generator....
Answer:
How fast the magnet in the generator is moving through the coiled wire
Explanation:
Another name for an electric generator is the electric motor. It is a device that is used to convert mechanical energy into electrical energy.
It comprises of a rectangular coil of insulated wire called armature which rotates about a fixed axis. Powerful magnets provides the required magnetic field. A commutator made of split ring copper and two carbon brushes are attached to it.
The voltage produced by the electric motor depends on;
i) The strength of the magnetic field.
ii) The number of turns of the coil
iii) The current across the armature
According to the following reaction, how many moles of carbon dioxide will be formed upon the complete reaction of 28.6 grams of carbon monoxide with excess oxygen gas?
carbon monoxide (g) + oxygen (g) ----> carbon dioxide (g) + moles carbon dioxide
Explanation:
We have 2CO + O2 => 2CO2.
Moles of CO = 28.6g / (28g/mol) = 1.021mol.
Moles of CO2 = Moles of CO = 1.021mol.
According to Image 2, which tectonic plate is composed of the largest percentage of oceanic lithosphere?
A. African Plate
B. Eurasian Plate
C. Indian Plate
D. Nazca Plate
Answer:
I think the answer is A the Afracan plate
Explanation:
hope this helps:)
Which change of state involves a release of energy?
Answer: CONDENSATION When steam is cooled, it releases thermal energy and turns into its liquid state. This process is called condensation. reversed if the liquid is cooled. The change from the liquid state to the solid state is called freezing
Why is it easier to switch to solar and wind energy as compared to other alternative energy sources? Select all that apply.
A. They are more cost-effective.
B. They require large, easily obtainable parcels of land.
C. They can be produced easily in areas with geothermal activity.
D. The land can be used for other purposes while supplying energy.
Answer:C. They can be produced easily in areas with geothermal activity.
D. The land can be used for other purposes while supplying energy.
Explanation:
Both c and d are correct
It is easier to switch to solar and wind energy as compared to other alternative energy sources because they can be produced easily in areas with geothermal activity and can be used for other purposes while supplying energy.
What is solar energy?Solar energy is any type of energy generated by the sun. Solar energy can be harnessed directly or indirectly for human use.
Generating energy that produces no greenhouse gas emissions from fossil fuels and reduces some types of air pollution.
Diversifying energy supply and reducing dependence on imported fuels. Creating economic development and jobs in manufacturing, installation, and more.
Hence, options C and D are correct.
Learn more about the solar energy here:
https://brainly.com/question/23611169
#SPJ2
Importance of Science and Technology in Contemporary world
Answer:
Technology, science and knowledge are important in modern contemporary society. The understanding of how social, cultural and material elements influence the production of new practices, new ways of understanding and new institutions is vital in our understanding of contemporary postmodern society.
Explanation:
1. impact of technological development on everyday life, 2. debates about the cultural significance of science and technology
Hope this helped! Brainlist?
Answer:
The importance of Science and Technology is so that if your tryin to prove your point with science you have to be educated on that in order to actually prove it. and for technology if we didn't have that we will not be able to know what is going on in society.
Explanation:
We can draw three inequivalent Lewis structures for the sulfite ion , SO32- . The concepts of formal charge and electronegativity can help us choose the structure that is the best representation. 1. Assign formal charges to the elements in each of the structures below. Note: Count oxygen atoms starting from the left for each structure. A B C Formal Charge S O1 O2 O3 2. The best Lewis structure for SO32- is
Answer:
1. The Lewis structure for SO32- is structure B.
Note: See attachment for complete question and for formal charges of the atoms in each structure.
Explanation:
The formal charge of an atom in a molecule is the assumed charge the atom would have if the electrons in the bonds were evenly distributed between the atoms.
Formal charge can be calculated as follows:
Formal charge = number of valence electrons - ( number of non-bonding electrons + ½ bonding electrons)
Formal charges are used to determine the best possible Lewis structure of a molecule or ion. The following rules are applied:
1. A structure in which all formal charges are zero is preferable to one in which some formal charges are not zero.
2. If non-zero formal charges must exist in the structure , the arrangement with the smallest non-zero formal charges is most preferred.
3. Lewis structures are preferable when adjacent formal charges are zero or of the opposite sign.
4. The structure with the negative formal charges on the more electronegative atoms is preferred among other structures of the molecule or ion.
From the above rules, structure B has negative charges on the more electronegative oxygen atoms and has more zero formal charges on the atoms. The central atom, sulfur also has a zero formal charge.
What type of crust is colliding?
Japan Trench
Eurasian Plate
Pacific Plate
Answer: The Eurasian Plate or both the Eurasian and Pacific Plate.
Explanation:
The density of molasses is 2.28g/mL. What volume of molasses would have a mass of 392.8g?
Answer:
V = 172.28 mL
Explanation:
density is mass divided by volume
p = density
m = mass
V = volume
p = m/v
V = m/p
V = 392.8/2.28
V = 172.28 mL
HELP!!! The chemical formula is different from the empirical formula in
A) H2O2
B) CO2
C) CO.
OD) H20.
Answer:
the Ans is H2O2
Explanation:
THANKS.............
please help me please help me
How much drug should be used in preparing 50mL of solution such that 5 mL diluted 500mL will yield 1:1000 solution?
Stock solutions contain a standardized concentration of the solute in a solution. To prepare 50 mL of solution with a ratio of 1:1000 solution, 5 gms of the drug will be required.
What is dilution?Dilution is the property of the solution with a less amount of solute concentration than the stock solution. A dilute solution is prepared by the addition of more solvent.
The addition of the solvent in a solution decreases the molar concentration which leads to dilution.
The ratio of 1:1000 means that 1 gm of the drug is present in 1000 mL (1L) of solution.
1000 mL = 1 gm × 500 mL × X gm
Here, the X represents the 0.5 gm of drug dissolved in 500 mL.
The amount of drug used is calculated as,
5 mL ÷ 50 ml = 0.5 g ÷ X g
X = 0.5 × 50 ÷ 5
= 5 gm
Therefore, 5 gm of the drug is required to prepare 50 mL of solution.
Learn more about dilution here:
https://brainly.com/question/27839179
#SPJ2
Substances A and B are combined. When combined, substance A, which is a black solid, sinks to the bottom of substance B which is a clear liquid. Based on this situation, which of the following is true.
A. Substances A and B formed a mixture
B. It is impossible to tell without more information
C. Substances A and B formed a compound
D. Substances A and B formed a new element
Answer:
c thats just what i do
Explanation:
name all 7 elements classified as metalloids.
PLEASE HELP ASAP
Answer:
Explanation
Boron (B)
Silicon (Si)
Germanium (Ge)
Arsenic (As)
Antimony (Sb)
Tellurium (Te)
Polonium (Po
What is the only way to be certain that a chemical change has occurred
Answer:
New kinds of products forms and the reaction is not easily reversible.
Explanation:
The only way to be certain that a chemical change has occurred is by finding out if new kinds of products have been formed.
A chemical change is a change in which new kinds of matter is formed. It is always accompanied by energy changes.
The process is not easily reversible.
Examples of chemical changes are combustion, rusting of iron, precipitation and souring of milk.