Answer:
You will not be allowed to have any learning aids while taking a test or ... A DNA molecule consists of three parts—a nitrogen base, ... There are four DNA nucleotides, each with one of the four nitrogen bases (adenine, thymine, cytosine, and guanine). The DNA forms a two-stranded spiral, or double helix.
Explanation:
hope this helps ✌️
We add 5.0 g of sugar to 100 mL of water.
What is the mass of the solution?
The mass of the solution : 105 g
Further explanationGiven
5 g sugar
100 ml water
Required
The mass of the solution
Solution
Density is a quantity derived from the mass and volume
Density is the ratio of mass per unit volume
Density formula:
[tex]\large {\boxed {\bold {\rho ~ = ~ \frac {m} {V}}}}[/tex]
ρ = density
m = mass
v = volume
Density of water = 1 g/ml
So mass of water :
= density x volume
= 1 g/ml x 100 ml
= 100 g
So total mass of solution :
=mass sugar+mass water
= 5 g + 100 g
= 105 g
Can somebody plz help answer both these 2 questions ONLY 1-2 sentences if good! thanks :]
WILL MARK BRAINLIEST WHOEVER ANSWER FIRST :DDDDD
I already answered number one, so I'll do number two. A turbine is a machine that spins in order to create energy or electricity, in some cases. The turbine collects the wind and it flows throughout the body of the turbine, where the machine then forms it into electricity.
Answer: 1. Generating energy is the meaning of process, which generates the electric power coming from sources of foremost energy. 2. A turbine is a machine that is for producing constant power, which works by a wheel or rotor, consisting of vanes, made to spin by speedy movement of steam, gas, air, water, etc. Due to this process, it allows for energy to be produced.
Explanation:
When a plant dies, it often decomposes and becomes part of the soil. This process is one step in which cycle?
Answer:
Carbon Cycle
Explanation:
When a plant dies, it often decomposes and becomes part of the soil. This process is one step in carbon cycle
What is soil ?
The soil is nothing but a mixture that contains minerals, organic matter, and living organisms, it is a loose sediment. Moreover, there are different types of soil such as Clay Soil, Sandy soil, Loamy Soil, Silt Soil
soil composed of 45% minerals, 50% spaces or voids and 5% organic matter, it performs many important functions such as Providing a growth medium for the plants, Acts a modifier of the earth’s atmosphere and it is One of the most crucial components of the biosphere
The formation of soil occur by weathering of rocks. the weathering of Solid rock can weather occur in three way such as Mechanical Weathering, Chemical Weathering, Biological Weathering
For more details regarding soil, visit
brainly.com/question/8937689
#SPJ6
Sulfur is a non metallic material that has a density of 2g/cm3. The volume of a sample of sulfur was measured to be 5.0cm3. What is the density of the wood?
question: Sulfur is a non metallic material that has a density of 2g/cm3. The volume of a sample of sulfur was measured to be 5.0cm3. What is the mass of the sulfur
Answer:
0.01 kg
Explanation:
Density: This can be defined as the ratio of mass of a body and it's volume. The S.I unit of volume is kg/m³.
Therefore,
Density = mass/volume
D = m/V......................................................... Equation 1
making m the subject of the equation
m = D×V ................................... Equation 2
Given: D = 2 g/cm³ = 2000 kg/m³, V = 5.0 cm³ = 0.000005 m³
subtitute into equation 2
m = 2000×0.000005
m = 0.01 kg or 10 g
When scientists create a representation of a complex process, they are
inferring
c. classifying
b. predicting
d making models.
a.
Please select the best answer from the choices provided
А.
B
D
Answer:
d making models.
Explanation:
When scientists create a representation of a complex process, they are inferring that they are making models.
A model is an abstraction of the real world or a complex process. Models are very useful in developing solutions to processes that are not easily simplified.
The models allow a part of a body to be simply studied. Through this simple abstraction, extrapolations to other parts of the system can be deduced. This can give very useful insights into the other parts of the system. The heterogeneity of complex processes is a huge limitation to understanding them. A homogenous part can be modelled and used to understand the system.Answer:
D. making models.
Explanation:
Hi, can someone help me balance this chemistry equation:
H2SO4 + RbOH -> Rb2SO4 + H2O
H2SO4 + 2RbOH -> Rb2SO4 + 2H2O
If you want an explanation, keep reading.
In the first portion, there are two hydrogen ions and four sulfate ions.
The second portion has one rubidium ions and one hydroxide ion.
On the other side of the equation, in order to keep those two rubidiums balanced, you'll need to add a two at the beginning of the second portion, but in that process you are giving a second hydroxide value.
Back to the right side, there is there is water (H2O).
On the first portion, there were two hydrogen ions. The second portion also has two hydroxides because of the value change (adding the two to the front).
So on the fourth portion, you'd have to add another two so you could balance the four hydrogen ions (H2 and 2OH) and the two oxygen ions (2OH).
I hope this was easy to understand.
when is light produced during e- configuration
How can people conserve water at home?
rinsing dishes with cold water instead of warm water
washing dishes only when the dishwasher is full
bathing pets with a hose instead of a bucket
eating fish bought from the store
Answer:
washing dishes only when the dishwasher is full
Explanation:
Out of the following options, the best way to conserve water is:
B. washing dishes only when the dishwasher is full
Ways to conserve water:Conserving water is important because it keeps water pure and clean while protecting the environment.
Turn off the faucet while brushing your teeth.Only run the washing machine and dishwasher when you have a full load.Use a low-flow showerhead and faucet aerators.Fix leaks.Take a Shower of 5 Minutes or Less. Install a Water-saving Toilet Flush System.Thus, option B is correct.
Find more information about Water here:
brainly.com/question/5060579
Which element or compound could be easily shaped into a piece of jewelry?
O Ag
O FeO
O NaCI
O CaF2
Answer:
Ag should be the correct answer
Of the three types of plate boundaries, which type is most likely to be associated
with pulling or tension forces?
transform
convergent
divergent
Carbon dioxide (CO2) is a common compound made of
A)3 elements and a total of 3 atoms
B)2 elements and a total of 2 atoms
C)3 elements and a total of 2 atoms
D)2 elements and a total of 3 atoms
can someone pls help me im tryna get this done tysm brailiest for free
Answer:
geothite
Explanation:
i did a test on this a few months ago
Answer:
sphalerite i think
Explanation:
Moraines left by glaciers are different from deposits left by rivers because the rocks left behind are _____.
Explanation:
unorganized and unsorted i think this is the answer
If X is the symbol of an element, which pair correctly represents isotopes of X
Answer:
What pair???
Explanation:
Answer:
C is the pair that represent the isotopes of x
Explain how scientists
came to the conclusion that “All living things are made of cells".
Answer:
scientist came to the conclusion that all living things are made of cells by con
Explanation:
DUE TOMORROW!!! 15 POINTS
please help!! the answers are already given i just need to show work :( ive been stuck on this for an hour now
Answer:
A. write balanced chemical equation (including states), for this process.
Explanation:
Almost all hydrocarbon 'burn' reactions involve oxygen; it's by far the most reactive substance in air.
Hydrocarbon combustions always involve
[some hydrocarbon] + oxygen --> carbon dioxide + steam.
C6H6(l) + O2 (g)--> CO2 (g)+ H2O (g)
Balance carbon, six on each side:
C6H6(l) + O2 (g)--> 6CO2 (g)+ H2O (g)
Balance hydrogen, six on each side:
C6H6(l) + O2 (g)--> 6CO2(g) + 3H2O (g)
Now, we have fifteen oxygens on the right and O2 on the left.
Two ways to deal with that. We can use a fraction:
C6H6 (l)+ (15/2)O2 (g)--> 6CO2 (g)+ 3H2O (g)
Or, if you prefer to have whole number coefficients, double everything
to get rid of the fraction:
2C6H6 (l)+ 15O2 (g)--> 12CO2 (g)+ 6H2O (g)
With the SATP states thrown in...
C6H6(l) + (15/2)O2(g) --> 6CO2(g) + 3H2O(g)
Which is an example of radiation?
O Troy's hand is burned when he touches hot wax.
O Earth is heated by energy from the Sun.
O Ahot dog is held over a fire and gets warm.
O Water is boiled in a pot on a stove burner.
The statement which is considered to be a good example of radiation is: B. Earth is heated by energy from the Sun.
The types of heat transfer.In Science, there are three (3) main types of heat transfer and these include:
ConductionConvectionRadiationWhat is radiation?Radiation can be defined as the transmission (transfer) of energy in the form of waves particles through a material medium or space. Thus, radiation is a type of heat transfer which causes a person on Earth that is sitting under the Sun to feel warm.
Read more on heat here: brainly.com/question/12072129
From where do nuclear power plants get uranium?
Answer:
Uranium mines operate in many countries, but more than 85% of uranium is produced in six countries: Kazakhstan, Canada, Australia, Namibia, Niger, and Russia. Historically, conventional mines open pit or underground were the main source of uranium.
Explanation:
Hope this helps
When shark pups are small what do they eat
Answer:
The baby sharks are not connected to their mum through an umbilical cord. Instead, they feed on their egg's yolk supply, other unfertilized eggs or even the embryos of their brothers and sisters. Through the latter method, only the strongest 1-3 sharks will get born, which is seen in the sand tiger shark.
Explanation:
Which of the following is a trend seen on the periodic table?
O A. Energy in ionic bonds
O B. Number of neutrons
O C. Electronegativity
O D. Mass of the electron
it’s electronegativity (:
Answer:
c
Explanation:
a p e x :)
Why are noble gases, like helium and krypton, unlikely to form a bond?
A. They do not have valence electrons and therefore cannot form bonds by sharing or trading
electrons.
B. They always have an equal number of protons and electrons.
C. They have full valence
orbitals and already have low energy.
D. They are nonmetals and gases and therefore their ionization energy is too high to form a bond.
Answer:
The valence electrons are the only parts of an atom that make chemical bonds. Noble gases don't form chemical bonds because they have a full outer shell (8 electrons).
Please help
mg(oh)2
How many H atoms are there?
How many Mg?
What is the total number of atoms?
Answer:
There are 2 hydrogen atoms, one magnesium atom, and 5 atoms in total.
Explanation:
We are given a compound in formula form. To make things easier to understand, we can first convert this to the name of the compound.
When a compound contains one or more elements in parentheses, these are usually a polyatomic ion. Polyatomic ions are ions made up of two or more elements with a positive or negative charge over the entire ion. Commons examples of these NH₄⁺ (ammonia) and HCO₃⁻ (bicarbonate). You can combine metals with polyatomic ions to create commonly known compounds, such as baking soda. The chemical name for baking soda is sodium bicarbonate, so we can combine Na (sodium) with HCO₃⁻ (bicarbonate) and create sodium bicarbonate: NaHCO₃.This compound is one magnesium atom bonded to two hydroxide ions.
Hydroxide is the compound between one hydrogen atom and one oxygen atom. The compound overall adopts a negative charge of 1.If we have one hydrogen atom and one oxygen atom, the most electronegative atom is written first in chemical formulas. Therefore, the symbol for Oxygen (O) goes first.Then, write in the hydrogen atom directly after the O symbol: OH.Finally, since we have a negative charge on the ion, we need to play a negative sign as a superscript for the compound. Therefore, this becomes OH⁻.Now, we need to determine the charge on the Magnesium atom which is determined from the amount of valence electrons the atom has.
On a periodic table, the symbol for Magnesium is Mg and this element has 2 valence electrons. In order to fulfill the Octet Rule, the It is more likely to give up 2 electrons to a nonmetal than it is to gain 6, so we can safely assume that the charge is ²⁺.We need to use the criss-cross technique to transfer the charges between the element and the ion, so the negative 1 charge goes to the Mg, which does not appear (negative 1 or positive 1 are implied) and since the magnesium has a charge of positive 2, this is the subscript for the hydroxide ion.Therefore, our compound becomes Mg(OH)₂, and we have labeled this as magnesium hydroxide.Now, to the number of atoms:
The new charge on Mg is 1-, so there is only one atom of Mg.The charge is 2+ on the OH ion, so there are two atoms of H and two atoms of O.Two atoms of oxygen, two atoms of hydrogen, and one atom of magnesium add up to be five atoms in total.Question 6 (1 point)
These stop the electricity from flowing (examples: glass, rubber). (Lesson 5.03)
insulator
conductor
electric current
resistor
Answer:
its an insulator
Explanation:
they block electricity from passing
5. CaCO, - CaO+CO,
Reaction Type
Answer:
(a) Decomposition: A substance breaks down to smaller species. [e.g. CaCO3(s) → CaO(s) + CO2(g) Decomposition of limestone to calcium oxide (quicklime) and carbon dioxide on heating.]
Based on the image below, what is the displacement of the sound wave for Sound A + B at 0.1025 seconds?
A. -0.3316
B.0.3316
C.0.6255
D.1.6162
Answer:
The displacement of the sound wave for Sound A + B at 0.1025 is;
D. 1.6162
Explanation:
The sum of the displacement of two sound waves is given by the principle of superposition as follows;
y(x, t) = [tex]y_m[/tex]·sin(k·x - ω·t) + [tex]y_m[/tex]·sin(k·x - ω·t + ∅)
Therefore, by the property of the superposition of waves, the amplitudes of linear waves are added linearly when they meet at the same point at a the same time
The given parameters for the wave are;
The time at which the value of the wave amplitude are given, t = 0.1025 seconds
The displacement of the sound wave A at the given time, "t" is A = 0.9739
The displacement of the sound wave B at the given time "t" is B = 0.6423
Therefore, the displacement of the sound A + B = 0.9739 + 0.6423 = 1.6162
PLZ HELP!
Why do we use ramps (inclined planes) to help us move objects?
Plz nothing from the internet :D
Which of these metal oxides would you be unable to reduce to pure metal using carbon?
zinc oxide
Coppes oxide
calciumoxide
iron oxide
Answer:
calcium oxide
Explanation:
its stable
There are several metals which can be used to reduce the metal oxides to corresponding metals. Carbon is an efficient reducing agent. Here Calcium oxide cannot be reduced to calcium by carbon. The correct option is C.
What is metal oxide?The reaction of metals with oxygen result in the formation of oxygen containing compounds called metal oxides. The binary compounds of oxygen with lesser electronegative elements are called oxides. Most of the stable oxides have 'O' in its -2 oxidation state. Na₂O, CO₂, etc. are some oxides.
Carbon is a reducing agent and it is present above the elements like 'Zn', 'Cu', 'Fe', 'Ag', etc. in the electrochemical series. But the oxides of highly reactive metals cannot be reduced with carbon. Because these metals have more affinity for oxygen than carbon.
The highly reactive metals are extracted by using the electrolytic reduction of their molten chloride. It is not possible for carbon to reduce the oxides of metals like 'Na', 'Ca', 'Al', etc.
Thus the correct option is C.
To know more about oxides, visit;
https://brainly.com/question/13059271
#SPJ6
What conversion factors
determine the number of
molecules from the mass of a
compound?
Answer: Multiply the mass by the inverse of molar mass, and then multiply by Avogadro's number.
Explanation: Convert the mass to moles, multiply the number of moles by the ratio of the number of atoms or ions to one mole, multiply by Avogadro's number.
Match the term with its description.
Match Term Definition
Chloroplast A) A green pigment present in all plants that absorbs light to provide energy for photosynthesis
Chlorophyll B) An organelle that contains chlorophyll and in which photosynthesis takes place
Energy C) A capacity to do work that can produce physical changes within living and nonliving systems
Glucose D) A type of sugar that is produced during photosynthesis to store chemical energy
Answer:
Chloroplast: An organelle that contains chlorophyll and in which photosynthesis takes place
Chlorophyll: A green pigment present in all plants that absorbs light to provide energy for photosynthesis
Energy: A capacity to do work that can produce physical changes within living and nonliving systems
Glucose:A type of sugar that is produced during photosynthesis to store chemical energy
hope it helps!
Answer: look at picture for the answer, and I showed that I got it right as well. It was worth 4 points and I got all 4. Brainiest please, if you don't mind <3
I Wanted to ask.. it's a weird question I know or maybe it's gonna get reported But
Why is my friend so irritating..
Answer:
if hyper its probaly because the have ADHD which is a type of drug that helps people with behavior disorders . the might have ticks wich is something that people can not control.
Explanation: