assign oxidation numbers to each atom in rh(c2o4)2

In H2NNH2, we have two Nitrogen atoms in the center, so N-N is the central bond. The Hydrogen atoms are bonded to the Nitrogen atoms, so the structure will look like this: H-N-N-H.

Learn more about Lewis structure of hydrazine H2NNH2

brainly.com/question/29756061

#SPJ11

In H2NNH2, we have two Nitrogen atoms in the center, so N-N is the central bond. The Hydrogen atoms are bonded to the Nitrogen atoms, so the structure will look like this: H-N-N-H.

Learn more about Lewis structure of hydrazine H2NNH2

brainly.com/question/29756061

#SPJ11

the identity of the missing nucleus in the nuclear decay reaction is 59₂₆Fe (Iron-59). The complete reaction is: 59₂₆Fe → 59₂₇Co + ₀₋₁e.

To find the missing nucleus for the nuclear decay reaction "?→59₂₇Co + ₀₋₁e," we can use the conservation of mass and atomic numbers.
Step 1: Identify the given values.
The given product nuclei are:
- 59₂₇Co (Cobalt-59), which has a mass number of 59 and an atomic number of 27
- ₀₋₁e (an electron or beta particle), which has a mass number of 0 and an atomic number of -1
Step 2: Apply the conservation laws.
The mass number and atomic number of the missing nucleus should be equal to the sum of the mass and atomic numbers of the product nuclei.
Missing nucleus mass number = 59 (from Co) + 0 (from e)
Missing nucleus mass number = 59
Missing nucleus atomic number = 27 (from Co) + (-1) (from e)
Missing nucleus atomic number = 26
Step 3: Identify the element with the calculated atomic number.
An atomic number of 26 corresponds to the element iron (Fe).
So, the identity of the missing nucleus in the nuclear decay reaction is 59₂₆Fe (Iron-59). The complete reaction is:59₂₆Fe → 59₂₇Co + ₀₋₁e.

To learn more about nuclear decay https://brainly.com/question/16677661

#SPJ11

The equilibrium expression for the reaction 2Na2O(s) ⇌ 4Na(l) + O2(g) is represented by Kc = [O2]^x

Chemical equilibrium occurs when the rate of the forward reaction equals the rate of the reverse reaction, and the concentrations of the reactants and products remain constant over time. For the given reaction, we can represent the equilibrium constant (Kc) using the concentrations of the products and reactants raised to the power of their stoichiometric coefficients. However, since equilibrium constants only consider gases and aqueous solutions, the expression will exclude solid and liquid species. Therefore, the equilibrium expression for this reaction is: Kc = [O2]^x

Here, [O2] represents the concentration of oxygen gas (O2) in the equilibrium mixture, and x is the stoichiometric coefficient of O2 in the balanced equation, which is 1. The reaction involves the decomposition of solid sodium oxide (2Na2O) into liquid sodium (4Na) and gaseous oxygen (O2). Due to the exclusion of solid and liquid species from the equilibrium expression, only the concentration of oxygen gas is considered in the equilibrium constant calculation. In conclusion, the equilibrium expression for the reaction 2Na2O(s) ⇌ 4Na(l) + O2(g) is represented by Kc = [O2]^x

Learn more about chemical equilibrium at:

https://brainly.com/question/5537989

#SPJ11

In the combustion of 3 g of gasoline, 46.99 kJ of heat are produced.

We must utilize the heat capacity of the bomb calorimeter and the change in temperature to determine how much heat is released during the combustion of 3 g of gasoline.

We must first determine the temperature change:

T is the product of the initial and final temperatures.

ΔT = 24.7°C - 20°C

ΔT = 4.7°C

The amount of heat released can then be calculated using the equation below:

q = CΔT

where q is the amount of heat released, C is the bomb calorimeter's heat capacity, and T is the temperature change.

Inputting the specified values results in:

q = 9.96 kJ/°C × 4.7°C

q = 46.99 kJ

To know more about combusted visit:

https://brainly.com/question/17066788

#SPJ1

Yes, acids can be considered as fine chemicals.

Yes, acids can be considered as fine chemicals. Fine chemicals are pure and complex chemical substances, produced in relatively small quantities with high purity and quality standards. Acids, such as sulfuric acid, hydrochloric acid, nitric acid, acetic acid and phosphoric acid are widely used in the chemical industry as intermediates or raw materials in the production of a wide range of fine chemicals.

Many acids are also used in various industrial processes, such as electroplating, etching, and metal cleaning. Therefore, acids play a crucial role in production of fine chemicals and are considered as essential class of chemicals in the chemical industry.

To know more about chemicals, refer

https://brainly.com/question/29886197

#SPJ1

If the volume of the carbon dioxide sample at 357 k is 779.1 ml the temperature at 529.8 ml is 310.3 K.

The ideal gas law states that PV=nRT, where P is pressure, V is volume, n is the number of moles, R is the ideal gas constant, and T is temperature. The number of moles of carbon dioxide does not change, so the equation can be rearranged to T = PV/nR.

By replacing P with 1 and nR with 0.0821 L*kPa/mol*K, the equation becomes T = V/0.0821. Therefore, to find the temperature at 529.8 ml, the volume was plugged into the equation and multiplied by 0.0821. The result was 310.3 K.

Learn more about carbon dioxide at: https://brainly.com/question/22963529

#SPJ11

Answer:

propane

Explanation:

the structure of propane

Combustion is a chemical reaction in which a substance reacts with oxygen to produce heat and light. Gasoline is a mixture of hydrocarbons, including octane ([tex]C_{8} H_{18}[/tex]). The process of combustion involves the breaking of chemical bonds in the fuel molecules and the formation of new bonds with oxygen molecules.

To calculate the Hrxn for the combustion of octane, one approach is to use average bond energies, which are based on the energy required to break and form bonds. Another approach is to use enthalpies of formation, which are based on the energy required to form a compound from its constituent elements.
The percent difference between the two results can vary depending on the accuracy of the data used and the assumptions made in the calculations. However, in general, enthalpies of formation are considered to be more accurate than average bond energies because they take into account the specific conditions under which the reaction occurs, such as temperature and pressure. Enthalpies of formation also provide a more direct measure of the energy change involved in a reaction.
In summary, the Hrxn for the combustion of octane can be calculated using either average bond energies or enthalpies of formation. The percent difference between the results can vary, but enthalpies of formation are generally considered to be more accurate.

To know more about the combustion :

https://brainly.com/question/31123826

#SPJ11

BaCrO_4 is insoluble in both acidic and neutral solutions. This is because BaCrO_4 is a salt that is highly insoluble in water due to its low solubility product constant (Ksp) value of 1.17 x 10^-10.

When BaCrO_4 is added to an acidic solution, it reacts with the hydrogen ions (H+) present in the solution to form chromic acid (H2CrO4) and barium ions (Ba2+). This reaction is represented by the following equation:
BaCrO4 + 2H+ → Ba2+ + H2CrO4
However, the formation of chromic acid does not increase the solubility of BaCrO_4, as both Ba2+ and H2CrO4 are also insoluble salts. In a neutral solution, BaCrO_4 does not undergo any significant reaction, and the salt remains insoluble. The BaCrO_4 particles may undergo some hydrolysis, but this does not increase their solubility in water.
Therefore, BaCrO_4 remains insoluble in both acidic and neutral solutions.

Learn more about acidic solution here:

https://brainly.com/question/13208021

#SPJ11

The strongest intermolecular force in H2S is dipole-dipole. H2S is a polar molecule with a permanent dipole moment. This means that the positive end of one molecule will attract the negative end of another molecule, leading to dipole-dipole interactions.

H2S does not have hydrogen bonding or ionic interactions, and while London dispersion forces are present in all molecules, they are weaker than dipole-dipole interactions in H2S.
The strongest intermolecular force in H2S is:
A. dipole-dipole
This is because H2S is a polar molecule with a bent molecular geometry, which results in the presence of a net dipole moment. Dipole-dipole interactions occur between the positive and negative ends of these polar molecules. Since H2S does not contain any ions (as in ionic forces) or a hydrogen atom bonded to a highly electronegative atom like nitrogen, oxygen, or fluorine (as in hydrogen bonding), the strongest intermolecular force present in H2S is dipole-dipole.

Visit here to learn more about  intermolecular force:

brainly.com/question/9007693

#SPJ11

Individuals who sporadically engage in physical activity without form, structure, or consistency are in the " Precontemplation" stage of change.
The correct answer is b.

Individuals in the pre-contemplation stage of the Transtheoretical Model of Behavior Change have no intention of changing their behavior in the near future.

They may be unaware of the need for change or may feel resigned to their current behavior. In terms of physical activity, individuals in this stage may engage in sporadic or irregular activity, but they are not yet considering making exercise a regular part of their lifestyle.

Therefore option b is correct.

Learn more about behavior:

https://brainly.com/question/1741474

#SPJ11

The pKsp of calcium sulfate at this temperature is 5.60.

To calculate the Ksp of calcium sulfate, we need to use the equation:

CaSO4 (s) ⇌ Ca²⁺ (aq) + SO₄²⁻ (aq)

When, solubility = 0.217 g/100 mL and,

The molar mass of CaSO4 = 40.08 (Ca) + 32.07 (S) + 4*16.00 (O) = 136.15 g/mol

Then the molar solubility is:

Molar solubility = (0.217 g/100 mL) / (136.15 g/mol)

                         = 0.00159 mol/100 mL

                         = 0.00159 mol/L

The Ksp expression for calcium sulfate is:

Ksp = [Ca²⁺] × [SO₄²⁻]

At equilibrium, the concentration of Ca2+ and SO42- will be equal to the solubility of calcium sulfate:

[Ca2+] = 0.00159 mol/L

[SO42-] = 0.00159 mol/L

Substituting these values into the Ksp expression:

Ksp = (0.00159 mol/L)(0.00159 mol/L)

      = 2.53 × 10⁻⁶

Taking the negative log of the Ksp:

pKsp = -log(Ksp)

         = -log(2.53 × 10^-6)

          = 5.60

To know more about Ksp and pKsp, click on the below link:

https://brainly.com/question/22782525

#SPJ11

The energy difference between the [H<--->H]eclipsed and [CH3<--->CH3]gauche conformations is 0.2 KJ/mol.

The total energy difference between the two conformations can be calculated by adding the Letimes energy to the energy difference between [H<--->H]eclipsed and [H<--->CH3]eclipsed, and subtracting the energy difference between [CH3<--->CH3]gauche and [H<--->CH3]eclipsed.

Thus, the total energy difference is:

Letimes + [H<--->CH3]eclipsed - [CH3<--->CH3]gauche - [H<--->H]eclipsed

= 11 KJ/mol + 6 KJ/mol - 3.8 KJ/mol - 4 KJ/mol

= 9.2 KJ/mol

Therefore, the energy difference between the [H<--->H]eclipsed and [CH3<--->CH3]gauche conformations is 9.2 KJ/mol. However, the question asks for the energy difference between the [H<--->H]eclipsed and [CH3<--->CH3]gauche conformations only.

Therefore, we need to subtract the energy difference between [H<--->CH3]eclipsed and [CH3<--->CH3]gauche to get the answer:

[H<--->H]eclipsed - [CH3<--->CH3]gauche = 4 KJ/mol - 3.8 KJ/mol = 0.2 KJ/mol

Hence, the energy difference between the [H<--->H]eclipsed and [CH3<--->CH3]gauche conformations is 0.2 KJ/mol.

For more questions like Energy click the link below:

https://brainly.com/question/12807194

#SPJ11

(a) In the Ag-Cu voltaic cell, the copper electrode serves as the cathode since Cu2+ ions are reduced to Cu(s) on the copper electrode. In the Ag-Co voltaic cell, the cobalt electrode serves as the anode since Co(s) is oxidized to Co2+ ions.

(b) The highest voltage is generated by the Ag-Zn voltaic cell because the reduction potential of Ag+ is higher than that of Zn2+. The lowest voltage is generated by the Cu-Co voltaic cell because the reduction potential of Co2+ is higher than that of Cu2+.

A voltaic cell, also known as a galvanic cell, is an electrochemical cell that converts chemical energy into electrical energy. It consists of two half-cells, each containing an electrode and an electrolyte solution. The two half-cells are connected by a salt bridge or porous membrane to allow for ion flow between them. In a voltaic cell, a spontaneous redox reaction occurs, which generates an electric potential difference between the two electrodes. This potential difference drives the flow of electrons through an external circuit, which can be used to power devices or perform work.

Visit here to learn more about voltaic cell brainly.com/question/1370699

#SPJ11

The low solubility of KHT is likely a result of an unfavorable ∆H° value. This is because KHT is a relatively large and complex molecule, which means that breaking apart its solid structure requires a significant amount of energy.

Additionally, the molecule contains multiple hydrogen bonds, which are relatively strong intermolecular forces. These factors contribute to a relatively large positive ∆H° value, which makes it energetically unfavorable for KHT to dissolve in water.

On the other hand, the ∆S° value for the dissolution of KHT is likely not a major contributing factor, as the process does not involve a significant change in the degree of disorder or randomness of the system. The unfavorable ∆H° means that energy is absorbed during the dissolution, making the process less favorable and leading to low solubility.

Learn more about solubility here:

https://brainly.com/question/28170449

#SPJ11

The bond dissociation energy for breaking all the bonds in a mole of methane (CH4) is 1640 kJ/mol.

To calculate the bond dissociation energy for breaking all the bonds in a mole of methane (CH4), you'll need to consider the bond dissociation energies for the C-H bond, which is provided in the table.

The methane molecule (CH4) has four C-H bonds. According to the table, the bond dissociation energy for a single C-H bond is 410 kJ/mol.

Step 1: Calculate the energy needed to break one molecule of methane by breaking all four C-H bonds:
Energy = 4 (C-H bonds) * 410 kJ/mol (bond dissociation energy for C-H)
Energy = 1640 kJ/mol

Step 2: Calculate the energy needed to break all the bonds in a mole of methane:
Energy = 1 mole of CH4 * 1640 kJ/mol

Therefore, the bond dissociation energy for breaking all the bonds in a mole of methane (CH4) is 1640 kJ/mol.

Learn more about bond dissociation energy at https://brainly.com/question/24301293

#SPJ11

1. Acetylocholine binds sodium channels that are activated by ligands.

2. When sodium ions get inside the cell, an action potential starts.

3. The sarcolemma and T tubules carry an action potential.

From the sarcoplasmic reticulum, calcium ions are released in step 4.

5. Because calcium and troponin are bound together, tropomyosin moves.

6. Actin is bound by myosin.

7. Using ATP energy, myosin cross-bridges swing and detach in alternating fashion.

Actin is still being moved towards the M-line by myosin filaments in position 8.

Muscle contractions are regulated by calcium ions, troponin and tropomyosin proteins, AND the act of skeletal muscles contracting.

To know more about troponin, click here:

https://brainly.com/question/30506716

#SPJ4

Answer:

To find the number of moles of the substance, Dawn will need to know the molar mass of the substance. The molar mass is the mass of one mole of the substance, expressed in grams per mole (g/mol).

Dawn can calculate the number of moles of the substance using the following formula:

moles = mass / molar mass

Where mass is the measured mass of the substance in grams.

To find the molar mass of the substance, Dawn will need to look up the atomic masses of the elements in the chemical formula of the substance, and multiply them by the number of atoms of each element in the formula. Then, she can add up the results to get the molar mass of the substance in g/mol.

Once Dawn has calculated the molar mass of the substance and measured its mass, she can use the formula above to calculate the number of moles of the substance.

Hope this helps!

1. Mass of dry, solid acid (g): This is the mass of the sample of the acid that you are titrating.

Solid acids are acids that exist in solid form rather than in solution. Unlike liquid acids, solid acids do not dissociate into ions when dissolved in water. Instead, they remain in their molecular form and can therefore act as a catalyst in many industrial and chemical reactions.

2. Molar concentration of NaOH (mol/L): This is the molar concentration of the NaOH solution that you are using to titrate the acid sample.
3. Buret reading of NaOH, initial (mL): This is the volume of the NaOH solution that is in the buret before you begin titrating the acid.
4. Buret reading NaOH at stoichiometric point, final (mL): This is the volume of the NaOH solution that is in the buret when you reach the stoichiometric point.
5. Volume of NaOH dispensed (mL): This is the difference between the initial and final buret readings of the NaOH solution.
6. Instructor's approval of PH versus [tex]V_{NaOH[/tex] graph: This is to ensure that the acid-base titration was done correctly and the graph accurately reflects the results.
7. Moles of NaOH to stoichiometric point (mol): This is the number of moles of NaOH required to reach the stoichiometric point.
8. Moles of acid (mol): This is the number of moles of acid that were titrated.
9. Molar mass of acid (g/mol): This is the molar mass of the acid sample.
10. Average molar mass of acid (g/mol): This is the average molar mass of the acid sample, which is calculated by taking the mass of the sample divided by the moles of the acid.
11. Volume of NaOH halfway to stoichiometric point (mL): This is the volume of the NaOH solution that is in the buret when you are halfway to the stoichiometric point.
12. [tex]PK_{a1[/tex] of weak acid (from graph): This is the [tex]PK_{a1[/tex] of the weak acid sample, which is calculated using the graph.
13. Average [tex]PK_{a1[/tex]: This is the average of the [tex]PK_{a1[/tex] of the weak acid sample.
14. How calculations for trial 1 on the next page: This is the instructions on how to calculate the results of the first titration trial.

To learn more about solid acid
https://brainly.com/question/15367135
#SPJ1

The specific rotation of a freshly prepared solution of the α-form gradually decreases with time due to a phenomenon called mutarotation. The solutions of the and forms reach the same specific rotation at equilibrium because equilibrium mixture contains a constant ratio of these two forms, regardless of their initial concentrations

Mutarotation occurs when there is an interconversion between two anomeric forms of a sugar molecule, such as the α- and β-forms, in an aqueous solution. This interconversion leads to an equilibrium state in which both forms coexist, resulting in a change in the optical rotation of the solution.

The reason that solutions of the α- and β-forms reach the same specific rotation at equilibrium is because the equilibrium mixture contains a constant ratio of these two forms, regardless of their initial concentrations. This is due to the spontaneous interconversion of the anomeric forms, which depends on the thermodynamic stability of the molecules, and not on their initial concentrations. Therefore, at equilibrium, the specific rotation of the solution reflects the combined contributions of both the α- and β-forms, giving a constant value for the specific rotation regardless of the starting form.

Learn more about mutarotation at:

https://brainly.com/question/13265198

#SPJ11

To solve for the pH of the solution, we need to use the Ka expression for HClO and set up an ICE table to determine the concentrations of H3O+ and ClO- in the solution.

Ka = [H3O+][ClO-]/[HClO], Let x be the concentration of H3O+ and ClO- formed from the dissociation of HClO.
Ka = x^2 / (0.100 - x).

Assuming x is much smaller than 0.100, we can simplify the denominator to 0.100, 2.9 × 10−8 = x^2 / 0.100

Solving for x, we get: x = 1.7 × 10−5 M
The concentration of H3O+ in the solution is the same as x, which is 1.7 × 10−5 M.

To determine the pH, we take the negative logarithm of the H3O+ concentration: pH = -log(1.7 × 10−5) = 4.77
Therefore, the pH of the solution with 0.100 M HClO and 0.075 M NaClO is 4.77.

To know more about concentrations click here

brainly.com/question/29072206

#SPJ11

The final product of the given synthetic transformation would be 2-ethyl-1-butene.

This step results in the formation of 2-ethyl-1-butene as the final product.

To know more about deprotonation click here:

https://brainly.com/question/30298709

#SPJ11

The concentrations of H+, HCO₃-, and CO₃₂- in a 0.087 M H₂CO₃ solution are 3.06 x 10⁻⁴ M, 0.0867 M, and 4.06 x 10⁻⁶ M, respectively.

The dissociation reactions for carbonic acid (H₂CO₃) are as follows:

H₂CO₃ ⇌ H+ + HCO₃- (Ka₁ = 4.45 x 10⁻⁷)

HCO₃- ⇌ H+ + CO₃₂- (Ka₂ = 4.69 x 10⁻¹¹)

Let x be the concentration of H+ in the solution. Then, the concentration of HCO₃- is (0.087 - x) and the concentration of CO₃₂- is equal to the concentration of H+.

Using the first dissociation equation, we can write the equilibrium expression:

Ka1 = [H+][HCO₃-]/[H₂CO₃]

Substituting the values and simplifying, we get:

4.45 x 10⁻⁷ = x(0.087 - x)/0.087

Solving for x, we get:

x = 3.06 x 10⁻⁴ M

Therefore, the concentration of H+ in the solution is 3.06 x 10⁻⁴ M.

Using the second dissociation equation, we can write the equilibrium expression:

Ka₂ = [H+][CO₃₂-]/[HCO₃-]

Substituting the values and simplifying, we get:

4.69 x 10⁻¹¹ = x²/(0.087 - x)

Since the concentration of CO₃₂- is equal to the concentration of H+, we can simplify the equation as:

4.69 x 10⁻¹¹ = x²/0.087

Solving for x, we get:

x = 4.06 x 10⁻⁶ M

Therefore, the concentration of CO₃₂- in the solution is 4.06 x 10⁻⁶ M.

To find the concentration of HCO3-, we can use the equation:

[HCO₃-] = 0.087 - [H+] - [CO₃₂-]

Substituting the values, we get:

[HCO₃-] = 0.087 - 3.06 x 10⁻⁴ - 4.06 x 10⁻⁶

[HCO₃-] = 0.0867 M

Therefore, the concentration of HCO₃- in the solution is 0.0867 M.

In summary, the concentrations of H+, HCO₃-, and CO₃₂- in a 0.087 M H₂CO₃ solution are 3.06 x 10⁻⁴ M, 0.0867 M, and 4.06 x 10⁻⁶ M, respectively.

Learn More about concentrations

https://brainly.com/question/28564792

#SPJ4

The pH of 0.203 M diethylammonium bromide, (C₂H₅)₂NH₂Br, is approximately 8.77.

Diethylammonium bromide is a salt of a weak base, diethylamine (C₂H₅)₂NH, and a strong acid, hydrobromic acid (HBr). When it is dissolved in water, it undergoes hydrolysis to form its respective weak base and strong acid. The diethylamine acts as a weak base, accepting a proton from water and generating hydroxide ions (OH⁻). The hydroxide ions increase the pH of the solution, making it basic.

The Kb value of diethylamine is 5.38 x 10⁻¹². Using this value, we can calculate the concentration of OH⁻ ions that are generated in the solution. The OH⁻ concentration is then used to calculate the pH of the solution using the equation pH = 14 - pOH.

To find the concentration of OH⁻ ions, we need to use the Kb expression:

Kb = [NH₂][OH⁻]/[NH₃⁺]

At equilibrium, [NH₂] = [OH⁻] and [NH₃⁺] = [(C₂H₅)₂NH₃⁺].

Therefore, Kb = [OH⁻]²/[(C₂H₅)₂NH₃⁺]

Solving for [OH⁻], we get [OH⁻] = sqrt(Kb x [(C₂H₅)₂NH₂Br]) = 1.50 x 10⁻⁴ M.

Using the equation pH = 14 - pOH, we get pH = 8.77. Therefore, the pH of 0.203 M diethylammonium bromide solution is approximately 8.77.

learn more about PH here:

https://brainly.com/question/15289714

#SPJ11

The pH of a 2.80 M acetic acid solution is approximately: 2.65.

To calculate the pH of a 2.80 M acetic acid solution, given the Ka value for acetic acid, [tex]CH^3COOH[/tex](aq), is 1.8x[tex]10^{-5[/tex], follow these steps:

1. Write the ionization equation for acetic acid: [tex]CH^3COOH[/tex](aq) ⇌ [tex]CH^3COO-[/tex](aq) + H+(aq)
2. Set up an ICE (Initial, Change, Equilibrium) table to represent the concentrations of each species at equilibrium.
3. Since the initial concentration of [tex]CH^3COOH[/tex] is 2.80 M, assume x M of [tex]CH^3COOH[/tex] dissociates into x M of[tex]CH^3COO-[/tex] and H+ ions.
4. Write the expression for Ka: Ka = [[tex]CH^3COO-[/tex]][H+]/[[tex]CH^3COOH[/tex]]
5. Substitute the equilibrium concentrations into the Ka expression: 1.8x[tex]10^{-5[/tex] = (x)(x)/(2.80-x)
6. Since Ka is very small, the change in concentration (x) is negligible compared to the initial concentration of acetic acid. Therefore, you can simplify the expression to: 1.8x10^-5 = x^2/2.80
7. Solve for x (concentration of H+ ions): x = √(1.8x[tex]10^{-5[/tex] * 2.80) ≈ 0.00224 M
8. Calculate the pH using the formula pH = -log10[H+]: pH = -log10(0.00224) ≈ 2.65

To know more about "pH" refer here:

https://brainly.com/question/30761746#

#SPJ11

The heat transfer (a) is 663.12 kJ and the entropy change is 1.21 kJ/K.(B)

In a polytropic process, we can use the following equations to find the heat transfer and entropy change:

1. For heat transfer (Q): Q = m * Cv * (T2 - T1)
2. For entropy change (ΔS): ΔS = m * Cv * ln(T2/T1)

Given: m_H2 = 5 kg, m_O2 = 4 kg, n = 1.6, T1 = 40°C = 313 K, T2 = 250°C = 523 K

First, we need to find the specific heat at constant volume (Cv) for the mixture:
Cv_mix = (m_H2 * Cv_H2 + m_O2 * Cv_O2) / (m_H2 + m_O2)

Using Cv_H2 = 10.16 kJ/kgK and Cv_O2 = 6.45 kJ/kgK:
Cv_mix = (5 * 10.16 + 4 * 6.45) / (5 + 4) = 8.312 kJ/kgK

Now, calculate (a) heat transfer:
Q = (5 + 4) * 8.312 * (523 - 313) = 663.12 kJ

Finally, calculate (b) entropy change:
ΔS = (5 + 4) * 8.312 * ln(523/313) = 1.21 kJ/K. (B)

To know more about polytropic process click on below link:

https://brainly.com/question/13001350#

#SPJ11

During the process of withdrawing one-half of the total mass of saturated liquid water from the 0.18-m rigid tank at 120°C, heat is transferred from a 230°C source to maintain a constant temperature in the tank. This results in the remaining water in the tank staying in the saturated liquid state at 120°C.

Regarding the 0.18-m rigid tank filled with saturated liquid water at 120°C, where one-half of the total mass is withdrawn in liquid form and heat is transferred from a 230°C source to maintain a constant temperature, please consider the following steps:

1. The initial state of the system is a saturated liquid water at 120°C.
2. The valve at the bottom of the tank is opened, allowing one-half of the total mass to be withdrawn in the liquid form. This reduces the mass of water in the tank by 50%.
3. During this process, heat is transferred to the water from a 230°C source to maintain the constant temperature of 120°C in the tank. This heat transfer compensates for the cooling effect caused by the withdrawal of liquid water.
4. Since the temperature in the tank remains constant at 120°C, the water remains in the saturated liquid state throughout the process.

Know more about temperature - brainly.com/question/27944554

#SPJ11

The reaction between galactose and glucose is a condensation reaction, resulting in the formation of lactose and water.

Based on the provided information, we can conclude that the reaction is a condensation reaction between galactose and glucose, forming lactose and water as products.

1. Identify the reactants: In this case, the reactants are galactose and glucose, which are both monosaccharides (simple sugars).

2. Identify the products: The products are lactose, which is a disaccharide, and water.

3. Analyze the reaction: Since the reaction involves the combination of two monosaccharides to form a disaccharide and water, we can conclude that it's a condensation reaction, also known as a dehydration synthesis reaction. This type of reaction occurs when two molecules combine, and a water molecule is removed in the process.

In summary, the reaction between galactose and glucose is a condensation reaction, resulting in the formation of lactose and water.

More on condensation reaction: https://brainly.com/question/31322120

#SPJ11

The gases in order of increasing density at STP are NH₃ < N₂ < Kr < N₂O₄. The correct answer is option d.

To place the given gases in order of increasing density at STP, we need to consider their molar masses, as density is directly proportional to molar mass at constant temperature and pressure. Here are the molar masses of the gases:
N₂: 28 g/mol
NH₃: 17 g/mol
N₂O₄: 92 g/mol
Kr: 83.8 g/mol

The density of a gas can be calculated using the ideal gas law:

PV = nRT

where P is the pressure of the gas, V is its volume, n is the number of moles of the gas, R is the ideal gas constant, and T is the temperature of the gas in kelvin.

Rearranging the ideal gas law, we get:

n/V = P/RT

The quantity n/V represents the molar density of the gas, which is the number of moles of gas per unit volume. Multiplying this quantity by the molar mass of the gas (M) gives the mass density of the gas (ρ):

ρ = (n/V) x M

Now, we can arrange them in order of increasing density:

NH₃ < N₂ < Kr < N₂O₄

Therefore option d is the correct answer.

Learn more about density:

https://brainly.com/question/1354972

#SPJ11

The nuclide that undergoes electron capture to produce 108Pd is 108Ag (D) and A) 108 Rh. In this process, an electron from the atom's inner shell is captured by the nucleus, converting a proton into a neutron and resulting in the formation of 108Pd.

In electron capture, an electron is captured by the nucleus, combining with a proton to produce a neutron. This changes the atomic number of the nuclide, but not the mass number. So, in this case, a 108Rh nuclide undergoes electron capture to produce 108Pd, where the atomic number of Rh (45) is reduced by one to become the atomic number of Pd (46).

Learn more about electrons here: brainly.com/question/28977387

#SPJ11