Answer:5
Step-by-step explanation: you divide 15 by 3 which gives you 5
If the temperature increases and the amount of water vapor in the air remains unchanged, how has the RH (relative humidity) changed?
When the temperature increases and the water vapor content in the air stays the same, the relative humidity decreases. This is because warmer air can hold more moisture than colder air, and therefore the ratio of the actual amount of water vapor in the air to the maximum amount of water vapor that the air can hold decreases as the air temperature increases.
Relative humidity depends on two factors: the amount of water vapor present in the air and the maximum amount of water vapor that the air can hold at a given temperature. As the temperature rises, so does the amount of water vapor that the air can hold, since warm air has more energy to hold the water molecules in vapor form. This reduces the ratio of the actual amount of water vapor in the air to the maximum amount of water vapor the air can hold, resulting in lower relative humidity.
To learn more about Relative Humidity:
https://brainly.com/question/5369085
https://brainly.com/question/21494654
Find the number of minutes between 17:53 and 7:26
There are 813 minutes in between 17:53 to 7.26 .
Time can be represented in two formats, that is in a twelve - hour format and in a twenty four - hour format.
Here the time 17:53 and 7:26 is represented in twenty four - hour format where the day is divided in twenty four hours and time runs from midnight and ends at midnight.
(If the time 17:53 and 7:26 was represented in twelve - hour format then it would have AM and PM to denote if the time is from midnight till noon or noon till midnight, which is clearly not the case.)
Thus, from 17:53 to 7.26 there is 13 hours and 33 minutes.
We know one hour has 60 minutes. Therefore by method of conversion of hours to minutes we get,
Number of minutes between 17:53 to 7.26 = {(13*60) + 33} = 780+33 = 813
To know more about conversion of hours to minutes here
https://brainly.com/question/30775919
#SPJ4
a hose fills hot tub at 4.6 gallons per minute. how many hours will it take to fill a 440-gallon hot tub?
It will take approximately 1.59 hours to fill the hot tub with a hose that has a filling rate of 4.6 gallons per minute
Assuming that the filling rate of the hose is constant, we can use the formula:
time = volume / rate
where time is the time taken to fill the hot tub, volume is the volume of the hot tub (440 gallons), and rate is the filling rate of the hose (4.6 gallons per minute).
Substituting the values, we get:
time = 440 / 4.6
which simplifies to:
time = 95.65 minutes
To convert minutes to hours, we divide by 60 (since there are 60 minutes in an hour):
time = 95.65 / 60
which simplifies to:
time = 1.59 hours
Therefore, it will take approximately 1.59 hours to fill the hot tub with a hose that has a filling rate of 4.6 gallons per minute.
Learn more about filling rate
https://brainly.com/question/26938204
#SPJ4
It will take approximately 1.594 hours to fill a 440-gallon hot tub with a hose that fills at a rate of 4.6 gallons per minute.
To determine how many hours follow these steps:
First, we need to find out how many minutes it takes to fill the hot tub.
Divide the total volume of the hot tub (440 gallons) by the rate at which the hose fills (4.6 gallons per minute):
440 gallons ÷ 4.6 gallons/minute = 95.65 minutes
Now, we need to convert the minutes into hours.
Since there are 60 minutes in an hour, divide the minutes by 60:
95.65 minutes ÷ 60 minutes/hour = 1.594 hours
It will take approximately 1.594 hours to fill a 440-gallon hot tub with a hose that fills at a rate of 4.6 gallons per minute.
for such more question on word problem
https://brainly.com/question/21405634
#SPJ11
If you make $15 per hour and work 20 hours per week, how much will you
make in 16 weeks?
Answer:
4800
Step-by-step explanation:
15 x 20 = 300 x 16 = 4800
Find the surface of each pyramid
The surface area of the given pyramid is 203 in²
Calculating the surface area of a square PyramidFrom the question, we are to calculate the surface area of the given square pyramid
From the given information, the base of the pyramid is 7 in
and
The slant height of the pyramid is 11 in
The surface area of a pyramid can be calculated by using the formula
A = a² + 2al
Where A is the area of the pyramid
a is the side base
and l is the slant height
From the given information,
a = 7 in
and
l = 11 in
Thus,
Surface area = 7² + 2(7)(11)
Surface area = 49 + 154
Surface area = 203 in²
Hence,
The surface area is 203 in²
Learn more on Calculating the surface area of a Pyramid here: https://brainly.com/question/22744289
#SPJ1
For which distributions is the median the best measure of center?
Select each correct answer.
hurry pls
The 1st and the 3rd are the distributions where the median the best measure of center
What is meant by medianThe median represents the central value in a dataset that is organized in ascending or descending order. If there are an even number of data points, the median can be calculated as the mean of the two middle values.
This method is much less prone to influence by extreme values when compared to other methods such as the mean. Hence, it is considered a more reliable measure of center particularly for datasets with outliers.
Read more on measure of centre here:https://brainly.com/question/15214370
#SPJ1
Gail averages 153 points per bowling game with a standard deviation of 14.5 points. Suppose Gail's points per bowling game are normally distributed. Let X= the number of points per bowling game. Then X ∼ N ( 153 , 14.5 ) . z-score when x = 108 is _____. The mean is 153 . The z-score tell you that x = 108 is _____ standard deviations to the left of the mean.
x = 108 is 3.10 standard deviations to the left of the mean.
What is standard deviation?The standard deviation (SD, also written as the Greek symbol sigma or the Latin letter s) is a statistic that is used to express how much a group of data values vary from one another.
The z-score when x = 108 is:
z = (108 - 153) / 14.5
z = -3.10
This tells us that x = 108 is 3.10 standard deviations to the left of the mean.
Learn more about standard deviation on:
https://brainly.com/question/475676
#SPJ4
A1=3. 1 and a4=2. 86
write a function rule for the nth term of the sequence. And find the 10th term of the sequence
According to the function, the 10th term of the sequence is 2.038.
We can now use the values of A1, A4, A2, and A3 to find the value of d. Substituting A2 and A3 into the expression for A4 - A3, we get:
A4 - A3 = d
2.86 - (A1 + 2d) = d
Solving for d, we get:
d = -0.12
Now that we know the common difference between consecutive terms, we can write the function rule for the nth term of the sequence as:
An = A1 + (n - 1)d
Substituting A1 = 3.1 and d = -0.12, we get:
An = 3.1 - 0.12(n - 1)
To find the 10th term of the sequence, we simply plug in n = 10 into the formula:
A10 = 3.1 - 0.12(10 - 1) = 2.038
To know more about function here
https://brainly.com/question/28193995
#SPJ4
A 3 column table with 4 rows. The first column is labeled Satellite with entries, A, B, C, D. The second column is labeled mass in kilograms with entries, 375, 250, 50, 500. The last column is labeled Distance from Earth in kilometers with entries, 320, 320, 320, 320. Which satellite has the greatest gravitational force with Earth? Earth and Satellite A Earth and Satellite B Earth and Satellite C Earth and Satellite D
Since the gravitational force is directly proportional to the mass, we can see that Satellite D has the greatest mass and therefore the greatest gravitational force with Earth. Therefore, the correct option is D.
To determine which satellite has the greatest gravitational force with Earth, we need to use the formula for gravitational force, which is:
force = (G x m1 x m2) / r^2
where G is the gravitational constant, m1 and m2 are the masses of the two objects, and r is the distance between the centers of the objects.
Since the mass of Earth is much greater than any of the satellites, we can assume that the distance between Earth and each satellite is the same. Therefore, we can compare the gravitational force of each satellite with Earth by calculating:
force = (G x Earth's mass x satellite's mass) / distance^2
Using this formula and plugging in the given values, we get:
For Satellite A: force = (G x Earth's mass x 375 kg) / (320 km)^2
For Satellite B: force = (G x Earth's mass x 250 kg) / (320 km)^2
For Satellite C: force = (G x Earth's mass x 50 kg) / (320 km)^2
For Satellite D: force = (G x Earth's mass x 500 kg) / (320 km)^2
Therefore, the correct option is D.
To learn more about gravitational force click on,
https://brainly.com/question/8864755
#SPJ4
Look at this table:
X
0
1
2
3
4
y
3
6
12
24
48
Write a linear function (y = mx + b) or an exponential function (y = a(b)*) that models the
data.
The exponential function that represents the data in the table is given as follows:
y = 3(2)^x.
How to define an exponential function?The standard definition of an exponential function is given as follows:
y = a(b)^x.
In which the parameters are given as follows:
a is the initial value, representing the value of y when x = 0.b is the rate of change.From the table, when x = 0, y = 3, hence the parameter a is given as follows:
a = 3.
When x is increased by one, y is multiplied by 2, hence this is an exponential function and the parameter b is given as follows:
b = 2.
Hence the function is defined as follows:
y = 3(2)^x.
More can be learned about exponential functions at https://brainly.com/question/2456547
#SPJ1
the sample size formula for estimating a proportion using a confidence interval with margin of error e involves the product p(1-p). this product is not known. a conservative approach is to use
A value of 0.25 for p(1-p) in the sample size formula when the true value of p is unknown.
This is because the value of p(1-p) is maximum when p=0.5, and since we do not have any information about the true value of p, assuming p=0.5 is the most conservative approach. Therefore, to calculate the sample size required to estimate a proportion using a confidence interval with a margin of error e, we can use the formula:
[tex]n = [z^2 * p(1-p)] / e^2[/tex]
where z is the z-score corresponding to the desired level of confidence (e.g., 1.96 for 95% confidence), and e is the desired margin of error. We can use p=0.5 and solve for n to get a conservative estimate of the sample size required for the given confidence level and margin of error.
Learn more about sample size ,
https://brainly.com/question/30885988
#SPJ4
If prior knowledge or data suggests that the proportion is significantly different from 0.5, then a more accurate estimate of p should be used in the formula.
To calculate the sample size formula for estimating a proportion using a confidence interval with a margin of error e, we
use the following formula:
[tex]n = (Z^2 × p × (1-p)) / e^2[/tex]
where n is the required sample size, Z is the Z-score corresponding to the desired level of confidence,
p is the estimated proportion, and
e is the margin of error.
Since the product p(1-p) is not known, a conservative approach is to use p = 0.5, which is the value that maximizes the
product p(1-p) for any given proportion.
This approach ensures that the sample size will be large enough to obtain a reliable estimate of the proportion, even if
the true proportion is close to 0 or 1. However, if prior knowledge or data suggests that the proportion is significantly
different from 0.5, then a more accurate estimate of p should be used in the formula.
for such more question on margin of error
https://brainly.com/question/30404882
#SPJ11
write the ratio 5x10^-1 :2:3x10^-10 in its simplest form
create an equation that models the total amount that Madison spends on fruit
Answer:
2.15g + 0.75w = 20.35
Step-by-step explanation:
(no explanation needed)
I hope everyone has a great day and can someone solve this will mark brainlist
y=8x-9
y=7
Answer:
x=2
Step-by-step explanation:
This is a system of equations that we can solve by using substitution.
We know that y=7. We know that y is also equal to 8x-9.
Since y is equal to both 7 and 8x-9, this must mean that 7 is also equal to 8x-9.
Let's set them equal and solve for x, like so:
[tex]y=8x-9=\\7=8x-9=\\16=8x=\\2=x[/tex]
So, x=2.
Cameron completed a 74 kilometer cycling race at an average speed of 11.84km/h.
How long did he take to complete the race? Give your answer in hours and minutes.
Consider the equation: x² + 10x + 22 = 13 1) Rewrite the equation by completing the square. Your equation should look like (x + c)2 = dor (x - c)² = d. 2) What are the solutions to the equation? Choose 1 answer: A x=5±4 x = -5±4 x = 5±16 x = -5±16
The solutions to the equation x² + 10x + 22 = 13 are: x = -5 ± 4
Solving the equation by completing the squareTo rewrite the equation by completing the square, we need to isolate the constant term on one side and group the x-terms together. Starting with:
x² + 10x + 22 = 13
Subtracting 13 from both sides:
x² + 10x + 9 = 0
Next, we add and subtract the square of half of the coefficient of x (which is 5 in this case) to complete the square:
x² + 10x + 25 - 25 + 9 = 0
x² + 10x + 25 - 16 = 0
Factor the perfect square trinomial:
(x + 5)² - 16 = 0
Now that we have rewritten the equation in the form (x + c)² = d, we can solve for x by taking the square root of both sides:
(x + 5)² - 16 = 0
Taking the square root of both sides and solving for x, we get:
x + 5 = ±4
So, we have
x = -5 ± 4
So the solutions to the equation are:
x = -5 + 4 = -1
x = -5 - 4 = -9
Therefore, the answer is x = -5 ± 4.
Read more about completing the square at
https://brainly.com/question/13981588
#SPJ1
_____ is used to test the hypothesis that the values of the regression parameters β1, β2, . . . , βq are all zero.
a. An F test b. A t test c. The least squares method d. Extrapolation
An F test is used to test the hypothesis that the values of the regression parameters β1, β2, . . . , βq are all zero. So the correct option is A.
The F test is based on the ratio of the mean square of the regression to the mean square of the error, and it is used to test the overall significance of the regression model. It tests whether there is a linear relationship between the independent variables and the dependent variable, and whether the model is statistically significant. In contrast, a t test is used to test the significance of individual regression coefficients, and the least squares method is a technique used to estimate the parameters of a linear regression model. Extrapolation is the process of estimating values of a dependent variable outside the range of the independent variables based on the regression model.
Learn more about hypothesis ,
https://brainly.com/question/29519577
#SPJ4
The F test is used to test the hypothesis that the values of the regression parameters β1, β2, . . . , βq are all zero. therefore, option a. an F text is correct.
This test is commonly used in regression analysis to determine whether there is a significant relationship between the
dependent variable and the independent variables.
The F test compares the variance explained by the regression model to the residual variance, and the null hypothesis
assumes that all regression coefficients are equal to zero, indicating no relationship between the dependent variable
and the independent variables.
If the calculated F-statistic is larger than the critical value, we reject the null hypothesis and conclude that there is a
significant relationship between the dependent variable and the independent variables.
for such more question on F test
https://brainly.com/question/17256783
#SPJ11
6(5x−3) what is the equation with the fewest symbols?
The equation with the fewest symbols is 30x - 18, which represents the simplified form of the given expression.
Equation calculation.An equation is a mathematical statement that shows the equality between two expressions. The given expression is not an equation since there is no equality sign present. However, we can simplify the expression to get an equivalent equation with the fewest symbols.
To simplify the expression, we use the distributive property of multiplication over addition/subtraction. We multiply 6 with each term inside the parentheses, i.e., 5x and -3. This gives us:
6(5x - 3) = 6(5x) - 6(3) = 30x - 18
This simplified expression is an equation that shows the equality between the left-hand side (LHS) and the right-hand side (RHS). The LHS is 30x - 18, and the RHS is also 30x - 18, which means that they are equal.
Therefore, the equation with the fewest symbols is 30x - 18, which represents the simplified form of the given expression.
Learn more about equation below.
https://brainly.com/question/22688504
#SPJ1
Please answer asap
It would be helpful
The answer of the given question based on the cylinder is , the volume of the solid = 929.44 inch³ . , the mistake is student may have only calculated the volume of the inner cylinder.
What is Volume?Volume is amount of three-dimensional space occupied by object or substance. It is a physical quantity that is measured in cubic units, such as cubic meters (m³), cubic centimeters (cm³), or cubic inches (in³). The volume of an object can be calculated by measuring its dimensions and using a mathematical formula specific to its shape.
To find volume of solid, we need to subtract volume of inner cylinder from volume of outer cylinder.
Volume of the outer cylinder = πr²h
where r = radius of the outer cylinder = 4 inches (diameter is given as 8 inches)
h = height of the outer cylinder = 23 inches
Volume of the outer cylinder = π(4)²(23) = 368π in³
Volume of the inner cylinder = πr²h
where r = radius of the inner cylinder = 2 inches
h = height of the inner cylinder = 18 inches
Volume of the inner cylinder = π(2)²(18) = 72π in³
So, the volume of the solid = Volume of the outer cylinder - Volume of the inner cylinder
= 368π - 72π
= 296π
= 929.44 inch³
The student's answer of 988.05 in³ is significantly higher than the correct answer, suggesting that the student may have only calculated the volume of the inner cylinder instead of subtracting it from the volume of the outer cylinder. This mistake may have arisen due to misreading the problem or misunderstanding the instructions.
To know more about Radius visit:
https://brainly.com/question/12922563
#SPJ1
Ok people. In the pdf are 2 questions. I literally just need to know what numbers go in them boxes. I am offering 30 points. Please Help soon.
Since the center of this semicircle is at the origin, O (0, 0), the radius of the semicircle is 5 units.
Since the center of this semicircle is at the point A (3, 4) and point B (-4, 5), the radius of the semicircle is 5√2 units.
How to calculate the distance between the two points?In Mathematics and Geometry, the distance between two (2) points that are on a coordinate plane can be calculated by using the following mathematical equation (formula):
Distance = √[(x₂ - x₁)² + (y₂ - y₁)²]
Where:
x and y represents the data points (coordinates) on a cartesian coordinate.
By substituting the given points into the distance formula, we have the following;
Distance = √[(x₂ - x₁)² + (y₂ - y₁)²]
Distance = √[(3 - 0)² + (4 - 0)²]
Distance = √[(3)² + (4)²]
Distance = √(9 + 16)
Distance = √25
Distance = 5 units.
At point A (3, 4) and point B (-4, 5), the radius is given by;
Distance = √[(-4 - 3)² + (5 - 4)²]
Distance = √[(-7)² + (1)²]
Distance = √(49 + 1)
Distance = √50 = 5√2 units.
Read more on distance here: brainly.com/question/12470464
#SPJ1
Missing information:
The question is incomplete and the complete question is shown in the attached picture.
Question 15(Multiple Choice Worth 2 points)
(Comparing Data MC)
The line plots represent data collected on the travel times to school from two groups of 15 students.
A horizontal line starting at 0, with tick marks every two units up to 28. The line is labeled Minutes Traveled. There is one dot above 4, 6, 14, and 28. There are two dots above 10, 12, 18, and 22. There are three dots above 16. The graph is titled Bus 47 Travel Times.
A horizontal line starting at 0, with tick marks every two units up to 28. The line is labeled Minutes Traveled. There is one dot above 8, 9, 18, 20, and 22. There are two dots above 6, 10, 12, 14, and 16. The graph is titled Bus 18 Travel Times.
Compare the data and use the correct measure of center to determine which bus typically has the faster travel time. Round your answer to the nearest whole number, if necessary, and explain your answer.
Bus 18, with a median of 13
Bus 47, with a median of 16
Bus 18, with a mean of 13
Bus 47, with a mean of 16
Based on the medians, we can conclude that Bus 47 typically has a faster travel time than Bus 18. The median travel time for Bus 47 is 16 minutes, which is 3 minutes faster than the median travel time for Bus 18, which is 13 minutes.
Travel time calculation.
To determine which bus typically has the faster travel time, we need to compare the measures of center for each data set. Since the data sets are relatively small and appear to have some outliers, the median is the more appropriate measure of center to use in this case, as it is less affected by extreme values than the mean.
For Bus 47, the median is 16, which means that half of the students take less than 16 minutes to travel to school on that bus, and half take more than 16 minutes.
For Bus 18, the median is 13, which means that half of the students take less than 13 minutes to travel to school on that bus, and half take more than 13 minutes.
Therefore, based on the medians, we can conclude that Bus 47 typically has a faster travel time than Bus 18. The median travel time for Bus 47 is 16 minutes, which is 3 minutes faster than the median travel time for Bus 18, which is 13 minutes.
Learn more about travel time below.
https://brainly.com/question/29798034
#SPJ1
4. 1. 33% of 2406 adults surveyed said that skim milk is a good calcium source. Find the margin of error and explain the results
To find the margin of error, we use the formula:
Margin of Error (ME) = Z * [tex]\sqrt{(p * (1-p) / n)}[/tex]
Z = 1.96 (for a 95% confidence level)
p = 0.33 (proportion of adults who said skim milk is a good calcium source)
(1-p) = 1 - 0.33 = 0.67 (complement of the estimated proportion)
n = 2406 (sample size)
ME = 1.96 * [tex]\sqrt{(0.33 * 0.67 / 2406)}[/tex] = 0.0185 (rounded to four decimal places)
This means that we can estimate, with 95% confidence, that the true proportion of adults who believe skim milk is a good calcium source falls within a range that is 1.85% above or below the reported proportion of 33% based on the survey results.
In other words, the actual proportion of adults who believe skim milk is a good calcium source could be as low as 31.15% or as high as 34.85% based on the margin of error.
if your degrees of freedom is 24, your sample size when conducting a t test for dependent means must be ______. a. 26 b. 23 c. 25 d. 24
If the degree of freedom is 24, your sample size when conducting a t-test for dependent means must be 25. Option C is the correct answer.
The sample size when conducting a t-test for dependent means depends on the specific study design and the level of significance desired, and cannot be determined solely based on the degrees of freedom.
However, if we assume that the sample size is equal for both groups, then the formula to calculate the degrees of freedom for a t-test for dependent means is:
df = n - 1
Where "n" is the number of pairs of observations in the sample.
Therefore, if the degree of freedom is 24, then the number of pairs of observations in the sample would be:
n = df + 1 = 24 + 1 = 25
Hence, the answer is 25.
Learn more about the degrees of freedom at
https://brainly.com/question/31178740
#SPJ4
Simplify. 5/12x1/12=
Answer:
Step-by-step explanation:
720
What is the relative minimum of the function?
Enter your answer in the box.
A grid with x axis increments of two increasing from negative ten to ten and y axis increments of two increasing from negative ten to ten. The grid contains a parabola opening up with a vertex at x equals negative three and y equals negative two.
The relative minimum of the function include the following: -2.
What is the vertex form of a quadratic equation?In this exercise, you are required to determine the relative minimum of the function with respect to the vertex form of a quadratic function h(x) that is written in standard form. Mathematically, the vertex form of a quadratic equation is given by this formula:
y = a(x - h)² + k
Where:
h and k represents the vertex of the graph.a represents the leading coefficient.Based on the information provided about this quadratic function, we can reasonably infer and logically deduce that that its vertex is at x equals negative three and y equals negative two.;
Vertex (h, k) = (-3, -2)
Therefore, the relative minimum is equal to -2.
Read more on vertex here: brainly.com/question/14946018
#SPJ1
Tiffany’s mother bought a car for $9000 five years ago. She wants to sell it to Tiffany based on a 15% annual rate of depreciation.
Part A. Identify each feature of the problem as it relates to the context and the exponential growth formula: y=a(1−r)t
.
a=
r=
Part B. Which equation correctly models the context of the problem?
Choose : A. y=9000(0.15)t
or B. y=9000(0.85)t
Answer : The equation is
Part C.
Tiffany wants to buy the car from her mother now. (t = 5)
A fair price for the car will be about $
in 5 years.
A) The correct features is,
⇒ a = 9000
⇒ r = 15%
B) The equation correctly models the context of the problem is,
⇒ y = 9000 (0.85)ˣ
We have to given that;
Tiffany’s mother bought a car for $9000 five years ago.
And, She wants to sell it to Tiffany based on a 15% annual rate of depreciation.
Now, We have;
the exponential growth formula is,
⇒ y = a(1 − r)ˣ
Here, We have;
⇒ a = 9000
⇒ r = 15%
Thus, We get;
The equation correctly models the context of the problem is,
⇒ y = a(1 − r)ˣ
⇒ y = 9000 (1 - 0.15)ˣ
⇒ y = 9000 (0.85)ˣ
Therefore, We get;
A) The correct features is,
⇒ a = 9000
⇒ r = 15%
B) The equation correctly models the context of the problem is,
⇒ y = 9000 (0.85)ˣ
Learn more about the percent visit:
https://brainly.com/question/24877689
#SPJ1
PLEASE ANSWER ASAP
IT WOULD BE HELPFUL
The answer of the given question based on the cylinder is , the volume of the solid = 929.44 inch³ . , the mistake is student may have only calculated the volume of the inner cylinder.
What is Volume?
Volume is amount of three-dimensional space occupied by object or substance. It is physical quantity that is measured in cubic units, like cubic meters (m³), cubic centimeters (cm³), or cubic inches (in³). The volume of object can be calculated by measuring its dimensions and using mathematical formula specific to its shape.
To find volume of solid, we need to subtract volume of inner cylinder from volume of outer cylinder.
Volume of the outer cylinder = πr²h
where r = radius of the outer cylinder = 4 inches (diameter is given as 8 inches)
h = height of the outer cylinder = 23 inches
Volume of the outer cylinder = π(4)²(23) = 368π in³
Volume of the inner cylinder = πr²h
where r = radius of the inner cylinder = 2 inches
h = height of the inner cylinder = 18 inches
Volume of the inner cylinder = π(2)²(18) = 72π in³
So, the volume of the solid = Volume of the outer cylinder - Volume of the inner cylinder
= 368π - 72π
= 296π
= 929.44 inch³
The student's answer of 988.05 in³ is significantly higher than the correct answer, suggesting that the student may have only calculated the volume of the inner cylinder instead of subtracting it from the volume of the outer cylinder. This mistake may have arisen due to misreading the problem or misunderstanding the instructions.
To know more about Radius visit:
brainly.com/question/12922563
#SPJ1
suppose scores on the sat exam are normally distributed with mean 1100 and standard deviation 200. answer the following. (a) aaron scored 989 on the sat. what proportion of students performed worse than aaron? round to 2 decimal places.
Answer: To find the proportion of students who performed worse than Aaron, we need to find the area to the left of his score of 989 on the normal distribution curve.
First, we need to standardize Aaron's score using the formula:
z = (x - mu) / sigma
where x is the score, mu is the mean, and sigma is the standard deviation.
Plugging in the values, we get:
z = (989 - 1100) / 200 = -0.55
Next, we look up the area to the left of z = -0.55 on the standard normal distribution table, or use a calculator to find:
P(Z < -0.55) = 0.2912
Therefore, the proportion of students who performed worse than Aaron is approximately 0.2912, or 29.12% (rounded to 2 decimal places).
Step-by-step explanation:
38 Mr. Liu buys 3 pizzas for a family dinner. He cuts each pizza into eighths.
How many pieces of pizza does Mr. Liu have for the family dinner?
(This is 5th grade)
Answer:
24 slices
Step-by-step explanation:
There are 3 whole pizzas. He cuts each of them into eighths. That means eight slices. 3 times 8 is 24. There are a total of 24 slices. This can also look like this: 24/8 or 24 over 8. Which also equals to 3.
Marilyn needs to buy two Series EE savings bonds as graduation gifts for her cousins. She has $75 to spend. What could be the face value on each bond? (Hint: The face values of the bonds she can buy are $50, $75, and $100. )
Marilyn has $75 to spend on two Series EE savings bonds as graduation gifts. The face values of the bonds she can buy are $50, $75, and $100. Therefore, she could buy two $50 bonds.
Since Marilyn has $75 to spend and she needs to buy two bonds, the total face value of the bonds she can purchase must be equal to $75.
Let x be the face value of the first bond, then the face value of the second bond must be 75 - x.
The face values of the bonds are $50, $75, and $100, so we can set up the following three equations
x + (75 - x) = 75 (since the total face value must be $75)
x = 50 (since the face value must be $50, $75, or $100)
x = 100 (since the face value must be $50, $75, or $100)
Solving these equations, we find that the possible face values for each bond are $50 and $25, $75 and $0, or $100 and $-25 (which is not a valid option).
Therefore, Marilyn could buy two bonds with face values of $50 each, or one bond with a face value of $75 and the other with a face value of $0 (which essentially means she would only be buying one bond).
To know more about bonds:
https://brainly.com/question/29198106
#SPJ4