C: Percentage -268 mol, mole ratio = 1.5 and whole number = 3
H: Percentage = 4.46 mol, mole ratio = 2.5 and whole number = 5
Cl: Percentage = 1.79 mol, mole ratio = 2 and whole number = 2
Therefore, The molecular formula is C3H5Cl2, so the correct answer is (C).
To find the molecular formula for the compound, we first need to determine the empirical formula.
We can assume that we have 100 grams of the compound, so we can convert the percentages to grams:
- 32.18 g C
- 4.50 g H
- 63.32 g Cl
Next, we can convert these masses to moles by dividing by their respective atomic/molecular masses:
- Moles of C: 32.18 g / 12.01 g/mol = 2.68 mol
- Moles of H: 4.50 g / 1.01 g/mol = 4.46 mol
- Moles of Cl: 63.32 g / 35.45 g/mol = 1.78 mol
We can divide each of these mole values by the smallest mole value to get a set of whole-number ratios:
- C: 2.68 mol / 1.78 mol = 1.50
- H: 4.46 mol / 1.78 mol = 2.50
- Cl: 1.78 mol / 1.78 mol = 1.00
These ratios can be rounded to the nearest whole number to give us the empirical formula: C1.5H2.5Cl1
To find the molecular formula, we need to determine the "n" value that will give us a molecular mass close to the given molar mass of 223.94 g/mol.
The empirical formula has a mass of approximately:
- (1.5 x 12.01 g/mol) + (2.5 x 1.01 g/mol) + (1 x 35.45 g/mol) = 56.53 g/mol
To determine "n", we can divide the molar mass by the empirical formula mass:
- n = 223.94 g/mol / 56.53 g/mol = 3.96
Rounding this to the nearest whole number gives us a value of 4, so the molecular formula is:
- (C1.5H2.5Cl1)4 = C6H10Cl4
Therefore, the answer is B) C6H10Cl4.
Learn more about the mole ratio:
brainly.com/question/15288923
#SPJ11
#41. What is the correct expression for the deltaG'o for the transition observed in the experiments described in the passage?
The correct expression for the deltaG'o for the transition observed in the experiments described in the passage is ΔG° = -RT ln(K).
In order to provide an accurate answer, I would need more information about the specific passage and experiments being referred to. However, I can provide a general answer about ΔG° (standard Gibbs free energy change) in relation to a transition observed in experiments.
The correct expression for the standard Gibbs free energy change (ΔG°) in a transition observed in experiments is:
ΔG° = -RT ln(K)
where:
- ΔG° is the standard Gibbs free energy change
- R is the gas constant (8.314 J/mol·K)
- T is the temperature in Kelvin
- K is the equilibrium constant for the reaction
This equation allows you to calculate the standard Gibbs free energy change for a transition observed in experiments, provided you have the required information.
Know more about Gibbs free energy here:
https://brainly.com/question/22697457
#SPJ11
Phenolphthalein has often been used to monitor the progress of acid-base neutralization reactions.
What color will phenolphthalein be if there is an excess of base present?
A) colorless
B) green
C) pink
D) yellow
Pink color will phenolphthalein be if there is an excess of base present.
If there is an excess of base present in an acid-base neutralization reaction, phenolphthalein will turn --pink . Phenolphthalein is a commonly used acid-base indicator that is colorless in acidic solutions and pink in basic solutions.
When an acid-base neutralization reaction occurs, the pH of the solution changes from acidic to basic as the reaction progresses. Once all the acid has reacted with the base, any additional base that is present will increase the pH of the solution and cause phenolphthalein to turn pink, indicating the presence of excess base. Therefore, the correct answer is C) pink.
Visit to know more about Phenolphthalein:-
brainly.com/question/31497639
#SPJ11
26. In a linked-based implementation of the ADT list with only a head reference, what is the performance of removing an entry at the end of the list? a. O(n) b. O(n 2 ) c. O(log n) d. O(1)
The performance of removing an entry at the end of a linked-based implementation of the ADT list with only a head reference is O(n).
This is because in order to remove the last entry, we need to traverse the entire list to find the second-to-last node, and then update its reference to null. This traversal requires visiting every node in the list, so the time complexity is proportional to the length of the list, which is O(n). Therefore, the correct answer is (a) O(n).
To know more about ADT list, please click on:
https://brainly.com/question/13440204
#SPJ11
Starting is one operational condition that a carburetor must be able to supply the proper fuel mixture for. What are the other four?
Starting is one operational condition that a carburetor must be able to supply the proper fuel mixture for. The other four are Idle, , Accelerator, variable load and speed operation.
Carburetor is the device that is used to mix fuel and air in an internal combustion engine. Its main objective is to provide quality air fuel for special operational requirements such as starting, idling, acceleration, adjusting variable load and speed operation.
The main disadvantage of float-type carburetor is its susceptibility to icing which occurs when there is fuel vaporization and decrease in air pressure in the venturi, which causes a sharp temperature drop in the carburetor. This fuel vaporization occurs within the cylinder of a fuel-injected engine and makes fuel injection system less susceptible to icing.
To know more about carburetor here
https://brainly.com/question/14305701
#SPJ4
Question 61
Which one of the following is the most common "technological fix" for reduction of sulfur dioxide emissions?
a. Coal washing
b. Fluidized bed combustion
c. Integrated gasification
d. Stack gas scrubbers
The most common "technological fix" for reduction of sulfur dioxide emissions is option d, stack gas scrubbers.
These devices remove sulfur dioxide from industrial emissions by spraying a mixture of water and alkaline substances into the flue gas stream. The sulfur dioxide reacts with the alkaline substances to form a solid compound that can be removed from the scrubber. This is a widely used method for reducing sulfur dioxide emissions in power plants and other industrial facilities. They work by introducing a lime or limestone-based reagent into the exhaust gas stream. The reagent reacts with the sulfur dioxide in the exhaust gas and binds it, forming a dry particulate matter that can be removed from the exhaust stream through filtration. This process is known as “scrubbing” and it is the most widely used method for reducing sulfur dioxide emissions from power plants and other industrial facilities.
learn more about sulfur dioxide Refer: https://brainly.com/question/24936794
#SPJ11
Only primary alcohols can be oxidized to carboxylic acids. T/F?
Answer: True. Only primary alcohols can be oxidized to carboxylic acids using an oxidizing agent such as potassium permanganate (KMnO4) or chromium trioxide (CrO3) in an acidic solution. Secondary alcohols can be oxidized to ketones, but not to carboxylic acids, while tertiary alcohols cannot be oxidized at all using these reagents.
Explanation:
Question 28 Marks: 1 Sodium fluoroacetate, also known as "1080," is the most effective fast-acting rodenticide available for use throughout the United States.Choose one answer. a. True b. False
a. True. Sodium fluoroacetate, also known as "1080," is indeed the most effective fast-acting rodenticide Rodenticide Act available for use throughout the United States.
The Federal Insecticide, Fungicide, and Rodenticide Act (FIFRA) of 1947 is the law that governs the use of pesticides and herbicides in the USA. Certain substances are not allowed to be used as pesticides under this law.
A proper federal regulatory framework for the use, distribution, and sale of pesticides is provided by the Federal Insecticide, Fungicide, and Rodenticide Act (FIFRA) statute.
The purpose of this law (FIFRA) is to safeguard those who use pesticides, consumers, and the environment.
The US Environmental Protection Agency (EPA) is required to grant licences for the use of pesticides throughout the country.
To assure the safety and efficacy of all pesticides used in the US, the EPA reviews and registers them in accordance with FIFRA. The organisation also controls the use, handling, and disposal of pesticides and performs routine inspections to make sure they remain safe.
If someone or a business violates FIFRA rules, the EPA has the authority to file a lawsuit and, if necessary, revoke or suspend pesticide registrations.
Learn more about Rodenticide Act here
https://brainly.com/question/25780629
#SPJ11
How do heat and acid affect the green chlorophyll molecule?
Both heat and acid can negatively impact the green chlorophyll molecule by causing it to degrade and lose its green color, which affects the plant's ability to perform photosynthesis effectively.
Heat and acid both affect the green chlorophyll molecule in different ways.
1. Heat: When chlorophyll is exposed to high temperatures, the molecule becomes unstable and starts to degrade. This degradation process results in the loss of its green color, which in turn affects the photosynthetic capacity of plants. The breakdown of chlorophyll can also lead to the formation of other pigments, such as carotenoids, which might cause a change in the color of the plant.
2. Acid: Exposure to acidic conditions can also cause chlorophyll to break down. Acidic environments can cause protonation of certain parts of the chlorophyll molecule, altering its structure and eventually leading to degradation. This process also results in the loss of the green color and reduced photosynthetic activity.
learn more about acidic Refer: https://brainly.com/question/14072179
#SPJ11
After 3-PGA is phosphorylated, it receives energized electrons from _____.- NADPH - NADP+ - ADP - CO2 - ATP
After 3-PGA is phosphorylated, it receives energized electrons from NADPH.
In the Calvin cycle, there are three steps involved:
1. Carbon Fixation: In this step, the carbon molecule is fixed that is the Carbon atom from carbon dioxide is fixed by conjugation with RuBP. The compound formed after is 3-PGA.
In this step, no ATP molecules are required.
2. Reduction: This step involves the reduction of the fixed carbon, into the formation of G3P which further produces carbohydrates. This step requires 2 ATP and 2 NADPH for each G3P molecule. After phosphorylation by ATPs 3-PGA receives energy from NADPH.
3. Regeneration of RuBP: This step is used to regenerate the used RuBP molecule used in the first step which is the fixation of carbon. This step requires five ATP per RuBP regeneration.
Learn more about the Calvin cycle:
brainly.com/question/920840
#SPJ4
A pH reading of 6.0 units indicates that the water sample is:
a. Very acidic
b. Slightly alkaline
c. Very alkaline
d. Slightly acidic
Answer c
the answer is c
What are some ways to reduce the effect of acid deposition?
There are several ways to reduce the effect of acid deposition. One method is to reduce emissions of sulfur dioxide and nitrogen oxide from power plants and factories through the use of clean technologies and alternative energy sources.
Another approach is to implement policies and regulations that encourage the reduction of air pollution. Additionally, reforestation and soil restoration can help to neutralize the effects of acid deposition on ecosystems. Overall, a combination of these strategies can help to reduce the harmful impacts of acid deposition on the environment and human health acid deposition.
Some ways to reduce the effect of acid deposition include:
1. Limiting emissions of sulfur dioxide (SO2) and nitrogen oxides (NOx) by implementing stricter regulations on industries and power plants.
2. Using cleaner energy sources, such as renewable energy like solar, wind, and hydroelectric power, to reduce reliance on fossil fuels that contribute to acid deposition.
3. Implementing energy efficiency measures to reduce overall energy consumption, thereby decreasing emissions of SO2 and NOx.
4. Encouraging the use of public transportation, carpooling, or electric vehicles to reduce emissions from vehicles, which contribute to acid deposition.
By implementing these strategies, we can effectively reduce the negative impacts of acid deposition on the environment and human health.
Learn more about acid deposition here
https://brainly.com/question/19999169
#SPJ11
the column of smoke (mostly water vapor) billowing from the huntington beach electrical plant smokestacks levels off at a particular altitude because
The column of smoke (mostly water vapor) billowing from the Huntington Beach electrical plant smokestacks levels off at a particular altitude because of atmospheric conditions.
As the hot smoke rises, it meets the cooler air in the atmosphere, causing the water vapor to condense and form clouds. This creates an equilibrium where the rising smoke is balanced by the sinking cool air, which leads to the smoke column leveling off at a particular altitude.
Additionally, the shape and height of the smokestacks also play a role in determining the height of the smoke column. The column of smoke (mostly water vapor) billowing from the Huntington Beach electrical plant smokestacks levels off at a particular altitude because the surrounding air temperature and pressure reach equilibrium with the rising water vapor, causing the water vapor to condense and disperse.
To learn more about equilibrium click here
brainly.com/question/29359870
#SPJ11
determine the volume in milliliters of a 0.270 m 0.270 m naoh naoh solution needed to neutralize a 155 ml 155 ml solution of 0.180 m 0.180 m hcl hcl and 0.360 m 0.360 m h2so4.
Answer:
19⋅mL . We know that. Concentration=Amount of substance in molesVolume of solution.
Explanation:
The volume in mililitres of a solution of 0.270 M NaoH solution needed to neutralize a 155 ml solution is 950 ml
We have
N₁V₁=N₂V₂
Where N= normality, V=Volume
Normality= basicity ×molarity
For H₂SO₄ basicity=2
Normality =0.360 × 2
=0.720 N
For HCl basicity=1
normality = 0.180×1
=0.180 N
Total strength N₂= 0.720N +0.180N =0.900N
N₁= 0.270 N
V₂= 285 ml
substituting all values we get
V₁= N₂V₂/N₁
=0.900N ×285ml/0.270N
=950 ml
To know more about NaOH solution here
https://brainly.com/question/30007576
#SPJ2
What is the coefficient of O2 when the following equation is properly balanced?___ CH3OH + ___ O2 = ___ CO2 + ___ H2OA) 1 B) 2 C) 3 D) 7 E) none of these
Answer:
C. 3
Explanation:
The balanced chemical equation for the combustion of methanol (CH3OH) is: 2 CH3OH + 3 O2 = 2 CO2 + 4 H2O. Therefore, the coefficient of O2 is 3. The correct answer is C) 3.
we add excess na2cro4 solution to 51.0 ml of a solution of silver nitrate (agno3) to form insoluble solid ag2cro4. when it has been dried and weighed, the mass of ag2cro4 is found to be 0.670 grams. what is the molarity of the agno3 solution? answer in units of m.
The need to use stoichiometry and the concept of limiting reagents. When excess Na2CrO4 is added to AgNO3, it forms an insoluble solid Ag2CrO4. The balanced chemical equation for this reaction is 2AgNO3 + Na2CrO4 → Ag2CrO4(s) + 2NaNO3.
The mass of Ag2CrO4 produced is 0.670 grams. Using the molar mass of Ag2CrO4 (331.73 g/mol), we can calculate the number of moles of Ag2CrO4. 0.670 g Ag2CrO4 x (1 mol Ag2CrO4/ 331.73 g Ag2CrO4) = 0.00202 mol Ag2CrO4
Since the reaction is a 1:1 stoichiometric ratio between Ag2CrO4 and AgNO3, we know that the number of moles of AgNO3 present in the original solution is also 0.00202 mol. We can calculate the molarity of the AgNO3 solution by dividing the number of moles by the volume of the solution in liters Molarity = moles of solute / volume of solution (in liters) The volume of the solution is given as 51.0 mL or 0.0510 L. Therefore Molarity = 0.00202 mol / 0.0510 L = 0.0396 M Therefore, the molarity of the AgNO3 solution is 0.0396 M. In summary, we can determine the molarity of a solution of AgNO3 by adding excess Na2CrO4 and allowing the formation of an insoluble solid, Ag2CrO4. We can then use stoichiometry to calculate the number of moles of AgNO3 and use that to calculate the molarity of the solution.
learn more about solid here.
https://brainly.com/question/17061172
#SPJ11
________ _____
•Adding large amounts of salt or sugar to foods creates a hypertonic environment for bacteria, causing plasmolysis.
•Pickling, smoking, and drying foods have been used for centuries to preserve foods.
•Osmotic pressure is never a_____ technique.
Preservation Techniques
Adding large amounts of salt or sugar to foods creates a hypertonic environment for bacteria, causing plasmolysis.
Pickling, smoking, and drying foods have been used for centuries to preserve foods.
Osmotic pressure is never a sterilization technique.
The preservation techniques and their effects on bacteria can be elaborated as follows:
Adding large amounts of salt or sugar to foods creates a hypertonic environment for bacteria, causing plasmolysis. This means that the high concentration of solutes outside the bacterial cells causes water to flow out of the cells, leading to cell shrinkage and ultimately inhibiting bacterial growth.
Pickling, smoking, and drying foods have been used for centuries to preserve foods. These methods work by either removing moisture, adding preservatives, or changing the food's environment, all of which help to slow down or prevent the growth of bacteria and spoilage.
Osmotic pressure is never a technique used for food preservation and sterilization; rather, it's a concept related to the movement of water across a semipermeable membrane in response to differences in solute concentrations. However, the principle of osmotic pressure can help us understand how some preservation techniques, such as adding salt or sugar, work by creating a hypertonic environment that leads to plasmolysis in bacteria.
To learn more about Food Preservation visit:
https://brainly.com/question/20397037
#SPJ11
13. The rate constant for a certain first-order reaction is 0.40/min. What is the initial rate in mole/Llmin, if the initial concentration of the compound involved is 0.50 mol/L?
The rate constant for a certain first-order reaction is 0.40/min, if the initial concentration of the compound involved is 0.50 mol/L then the initial rate is 0.20 mol/L min.
The rate law for a chemical reaction is an expression that describes a relationship between the rate of the reaction and the concentrations of all the reactants participating in it.
The rate law for a first-order reaction is given by:
Rate = k[A]
Here k is the rate constant and [A] is the concentration of the reactant.
The initial rate of the first-order reaction is calculated by substituting the rate constant and initial concentration into the rate law equation.
Rate = k[A]
Rate = (0.40/min) x (0.50 mol/L)
Rate = 0.20 mol/Lmin
Therefore, the initial rate of the reaction is 0.20 mole/Lmin.
To know more about rate constant here
https://brainly.com/question/20305871
#SPJ4
Together with Ca, this mineral in involved in muscle contractions and blood clotting. What mineral is this?
The mineral that is involved in muscle contractions and blood clotting, together with Calcium (Ca), is Magnesium (Mg).
Both minerals play crucial roles in these physiological processes. Magnesium is an essential mineral for muscle contraction, nerve conduction, and blood clotting. It helps to relax and contract muscles, and it is also involved in nerve signaling and the release of energy from food. Magnesium is also necessary for blood clotting, as it helps to activate certain enzymes involved in the clotting process. Magnesium is also required for the production of energy and helps to regulate blood glucose levels, as well as being important for maintaining healthy bones and teeth.
learn more about Magnesium refer: https://brainly.com/question/1533548
#SPJ11
when fuel Burns what is the dissipated energy and why?
Answer:
When we burn fuels, it begins a process called combustion. Combustion is where you burn a fuel in the presence of an oxidant like oxygen. Heat is produced, because the bonds in the fuel store more energy than the bonds in the water and carbon dioxide that are the products of combustion.
Hope it helped! :)
Which of the following statements is correct for an endothermic reaction?
- The activation energy of the forward reaction is equal to the difference of the activation energy for the reverse reaction and the enthalpy change for the forward reaction.
- The activation energy for the forward and reverse reactions is equal.
The activation energy of the forward reaction is equal to the enthalpy change for the reverse reaction.
- The activation energy of the forward reaction is equal to the sum of the activation energy for the reverse reaction and the enthalpy change for the forward reaction.
The activation energy of the forward reaction is equal to the sum of activation energy for the reverse reaction and the enthalpy change for the forward reaction.
Why is the endothermic reaction a forward one?The forward reaction will take place if the reaction is endothermic as specified, increasing the amounts of the products and lowering the amounts of reactants. If the temperature is reduced, the result will be the opposite.
An endothermic reaction: why is that?Any chemical process that takes heat from the surroundings is said to be endothermic. The energy that was absorbed provides the activation energy for the process. This kind of response is characterised by its icy sensation.
To know more about enthalpy change visit:-
https://brainly.com/question/29556033
#SPJ1
Question 59
Mobilization of metals in acid water becomes a direct threat to human health when:
a. Plankton absorb the metal
b. The acidified water is a source of drinking water
c. Fish are present in the water and die
d. Algae disappear from the water
b. The mobilization of metals in acid water becomes a direct threat to human health when the acidified water is a source of drinking water.
This is because the metals can accumulate in the body over time and cause health problems such as kidney damage, neurological disorders, and cancer. It is important to treat and monitor acid water sources to prevent harm to human health.When acid water mobilizes metals, it can dissolve heavy metals and other harmful substances. If the acidified water is consumed as drinking water, these harmful substances can be ingested by humans, posing a direct threat to their health.
learn more about acidified Refer: https://brainly.com/question/23649888
#SPJ11
3. This chart shows the mean age and standard deviation for students in three dance classes. Use these
data to answer the questions.
Class
Morning
Noon
Evening
Mean (years)
8.9
15
22
Standard deviation
(years)
2.4
1.2
0.8
a) Which class has the highest average age? Morning / Noon / Evening
b) Which class has ages that are the most spread out? Morning / Noon / Evening
c) If the noon class has a symmetric distribution, what is the median?.
According to the information we can infer that the class with the highest average age is the Evening class, the class with the most spread out ages is the Morning class, and the mean age of the noon class is 15 years.
Which class has the highest average age?To identify which class has the oldest average age, we must analyze the information in the graph. As we can see, the night class has a mean of 22 years, so we can infer that their average age is higher.
Which class has ages that are the most spread out?To identify the class that has the greatest spread out age is the one that has the highest standard deviation. In this case it would be the morning class that has a standard deviation of 2.4
If the noon class has a symmetric distribution, what is the median?To identify the mean of the noon class, we must take into account that its distribution is symmetrical, so the value of the mean would be the same as the median, that is, 15 years.
Learn more about statistics at: https://brainly.com/question/31538429
#SPJ1
give a formula corresponding to the following name: dibromobis(ethylenediamine)cobalt(iii) sulfate g
The formula corresponding to the following name Dibromobis(ethylenediamine)cobalt(III) sulfate is [Co(en)₂(Br)₂]₂SO₄.
The number of atoms of each element in one molecule of a chemical is expressed by the molecular formula. The formula that displays the precise number of each atom in a molecule is known as a molecular formula. The Molecular method is determined using the empirical method when the molar mass value is known.
n=molar mass/the empirical formula's mass
The empirical formula or an exact multiple of it, as well as the molecular formula, are frequently the same.
Since Cation is written before anion, hence we can say that complex ion (Dibromobis(ethylenediamine)Cobalt(III)) is a cation, and counter ion (Sulfate) is an anion.
In the second step, we will try to write the complex basis the below information :-
Central atom is CobaltThere are 2 ligand 2.1 en (neutral) and there is 2 of them. 2.2 Bromine (negative), 2 of themOxidation state of Co is +1Basis above information, formula is :- [Co(en)₂(Br)₂]₂SO₄.
Learn more about Formula:
https://brainly.com/question/30353496
#SPJ4
immediately after introducing the copper into the water, what do you expect will happen to the temperature of the water?
When copper is introduced into water, it is expected that the temperature of the water will remain relatively unchanged.
This is because copper is a good conductor of heat, meaning it can quickly transfer any heat it may have to the surrounding water molecules. Therefore, the copper will not cause a significant increase or decrease in the temperature of the water.
After introducing the copper into the water, you can expect the temperature of the water to change depending on the initial temperature of the copper. If the copper is warmer than the water, it will transfer heat to the water, causing the water's temperature to increase.
Conversely, if the copper is cooler than the water, it will absorb heat from the water, leading to a decrease in the water's temperature. This heat exchange will continue until the copper and water reach thermal equilibrium.
To know more about temperature click here
brainly.com/question/29072206
#SPJ11
Immediately after introducing the copper into the water, I expect the temperature of the water to change based on the following terms:
1. Heat transfer: If the copper is at a different temperature than the water, heat will transfer between the two substances until they reach thermal equilibrium.
2. Specific heat capacity: The specific heat capacity of copper and water are different, with water having a higher specific heat capacity. This means that water can absorb more heat without a significant temperature increase compared to copper.
3. Thermal conductivity: Copper has a high thermal conductivity, which means it transfers heat quickly. As a result, the temperature of the water may change relatively fast upon introducing the copper.
In summary, when you introduce the copper into the water, the temperature of the water will change due to heat transfer, specific heat capacity, and thermal conductivity. The specific direction of the temperature change (increase or decrease) will depend on the initial temperatures of the copper and the water.
To know more about Thermal conductivity:
https://brainly.com/question/7643131
#SPJ11
Question 10
The chemical quality of a pool is generally measured by which 2 tests?
a. pH and alkalinity
b. alkalinity and TDS
c. pH and chlorine residual
d. alkalinity and chlorine residual
The chemical quality of a pool is generally measured by two tests are c. pH and chlorine residual.
Monitoring and maintaining the appropriate pH and chlorine residual levels are essential for a healthy and safe swimming environment. The pH scale measures the acidity or alkalinity of water, ranging from 0 to 14, with 7 being neutral. The ideal pH level for a swimming pool is between 7.2 and 7.8. This range ensures that the water is comfortable for swimmers and maximizes the effectiveness of the chlorine.
Chlorine is a vital disinfectant used to kill harmful bacteria, viruses, and other microorganisms in the water. The residual chlorine level indicates the amount of chlorine available to continue sanitizing the pool. The ideal range for chlorine residual in a pool is 1-3 parts per million (ppm),it is crucial to regularly test and adjust the pH and chlorine residual levels to provide a clean and safe swimming environment for everyone. The chemical quality of a pool is generally measured by two tests are c. pH and chlorine residual.
learn more about disinfectant here:
https://brainly.com/question/29887053
#SPJ11
If the concentration of H+ ions in a solution is 3.16 x 10^-4mol/1. Then what is the concentration of OH ions?
A 3.16 x 10^-4 mol/L
B 3.16 x 10^-11 mol/L
C 3.16 x 10^-13 mol/L
D 3.16 x 10^-14 mol/L
The concentration of [OH-] = 3.16*[tex]10^{-11}[/tex]M.
What is concentration?The amount of solute contained in a specific amount of solution is the substance's concentration. The number of moles of solute in 1 L of solution, or molarity, is used to express concentrations.
What is solution?In chemistry, a solution is a homogeneous mixture of two or more compounds in their relative proportions. The composition of the solution can be continually changed up to the solubility limit. Although solutions of gases and solids are possible, the term "solution" is most frequently used to refer to the liquid condition of matter.
according to question:
[H+] *[OH-] = 1*[tex]10^{-14}[/tex]
If [H+] = 3.16*[tex]10^{4}[/tex]
then [OH-] = (1*[tex]10^{-14}[/tex]) / ( 3.16*[tex]10^{-4}[/tex])
[OH-] = 3.16*[tex]10^-11[/tex] M
To know more about concentration visit:
https://brainly.com/question/10725862
#SPJ1
Which factor causes a decrease in the rate of dissolution?
There are several factors that can cause a decrease in the rate of dissolution:
Decrease in temperature: As the temperature decreases, the kinetic energy of the particles decreases, and the rate of dissolution also decreases.
Increase in solute concentration: If the solution is already saturated with solute, then adding more solute will cause it to become supersaturated, which can cause a decrease in the rate of dissolution.
Increase in pressure: Increasing the pressure can force more solute into the solution, but it can also cause an increase in the solubility of the solute, which can cause a decrease in the rate of dissolution.
Decrease in surface area: If the solute is in the form of large particles, then breaking it down into smaller particles will increase the surface area available for dissolution and increase the rate of dissolution. Conversely, decreasing the surface area will decrease the rate of dissolution.
Formation of a precipitate: If the solute is capable of forming a precipitate in the solution, then the rate of dissolution may decrease as the solute is removed from the solution and deposited as a solid.
~~~Harsha~~~
Which one of the following is an example of a balanced chemical reaction?A) HCl + KMnO4 ® Cl2 + MnO2 + H2O + KClB) HCl + KMnO4 ® Cl2 + MnO2 + 2H2O + KClC) 2HCl + 2KMnO4 ® Cl2 + MnO2 + 2H2O + 2KClD) 6HCl + 2KMnO4 ® 2Cl2 + 2MnO2 + 4H2O + 2KClE) 8HCl + 2KMnO4 ® 3Cl2 + 2MnO2 + 4H2O + 2KCl
The correct answer is C) 2HCl + 2KMnO4 ® Cl2 + MnO2 + 2H2O + 2KCl. This is because the equation has the same number of atoms of each element on both the reactant and product side, making it a balanced chemical reaction.
The correct option for a balanced chemical reaction is:
D) 6HCl + 2KMnO4 ® 2Cl2 + 2MnO2 + 4H2O + 2KCl
1. Write down the unbalanced reaction: HCl + KMnO4 → Cl2 + MnO2 + H2O + KCl
2. Balance the elements one by one, starting with those that appear in fewer compounds. In this case, start with Mn:
HCl + KMnO4 → Cl2 + 2MnO2 + H2O + KCl
3. Balance the potassium (K):
HCl + 2KMnO4 → Cl2 + 2MnO2 + H2O + 2KCl
4. Balance the chlorine (Cl):
6HCl + 2KMnO4 → 3Cl2 + 2MnO2 + H2O + 2KCl
5. Finally, balance the hydrogen (H) and oxygen (O):
6HCl + 2KMnO4 → 2Cl2 + 2MnO2 + 4H2O + 2KCl
Now the reactant for the chemical reaction is balanced.
Learn more about reactants:
brainly.com/question/17096236
#SPJ11
Provide the balanced rxn equation for the rxn that occurs when the mixture of initial reactants forms a clear yellow soln n the dibenzalacetone synthesis.
The balanced reaction equation for the formation of dibenzalacetone from the initial reactants that form a clear yellow solution is:
2C6H5CHO + C6H5CH=CHCHO → C17H14O + 2H2O
In this equation, C6H5CHO and C6H5CH=CHCHO are the reactants, which undergo a condensation reaction to form the product C17H14O (dibenzalacetone) and water (H2O).
Hi! In the dibenzalacetone synthesis, the balanced reaction equation for the formation of a clear yellow solution involves the condensation of acetone with benzaldehyde. The reactants and product in this reaction are as follows
2 C₆H₅CHO (benzaldehyde) + CH₃COCH₃ (acetone) → C₁₇H₁₄O (dibenzalacetone) + H₂O (water)
This balanced equation represents the mixture of initial reactants producing a clear yellow solution of dibenzalacetone.
To know more about Dibenzalacetone click here .
brainly.com/question/19340462
#SPJ11
How TLC could have been used (although it was not carried out)
Thin layer chromatography (TLC) is a chromatographic technique which is used to separate the components of a mixture using a stationary phase and a mobile phase.
In TLC, the plate is spotted at a point above the solvent front and the solvent moves up the plate by capillary action leading to the separation of the various components of the mixture spotted on the plate.
However, if the TLC plate is allowed to remain in the developing chamber for too long such that the solvent front reaches the top of the plate, the components of the mixture will recombine at the top of the plate and cancel out any separation which may have occurred on the plate.
To know more about TLC here
https://brainly.com/question/28814348
#SPJ4