An 18-ounce bottle of juice costs $4.86. What is the unit rate for the juice

You may get back payment for limited capability for work.

In the event that you receive Universal Credit, the decision-maker will affix a letter indicating whether you passed the assessment to your journal. Whether or not you pass, you can still receive Universal Credit. If you don't succeed, though, you might have to start seeking employment.

If you did well on the test, the letter will state which group you were assigned to. In most cases, you will get additional funds for your Universal Credit claim if you have been assigned to the Limited Capability for Work Related Activity (LCWRA) category. Additionally, you might get some back pay.

To learn more about work here:

https://brainly.com/question/26385716

#SPJ4

Therefore, the solution to this given problem is the standard deviation comes out to be 139.41 .

A measure of how far measurements for a group deviate from the mean is called standard deviation (mean or expected value). A low standard deviation indicates that most of the numbers are within a few standard deviations of the average, whereas a large standard deviation indicates that the numbers are more dispersed.

Here,

Given:

sample size(n) =100

SE =13.941

Since we are aware, the standard error of the mean

=> SE = [tex]\frac{\alpha }{\sqrt{n} }[/tex]

So α = SE * [tex]\sqrt{n}[/tex] = 13.941 * 10 = 139.41

Therefore, the standard deviation comes out to be 139.41 .

To know more about standard deviation , visit

https://brainly.com/question/23907081

#SPJ4

The angle of elevation of the sun if a building of 135 feet tall cast a shadow  is 42°.

The angle of elevation is an angle that is formed between the horizontal line and the line of sight.

To calculate the angle of elevation, we use the formula below.

Formula:

Where:

From the question,

Given:

Substitute these values into equation 1

Hence, the angle of elevation of the sun is 42°.

Learn more about angle of elevation here: https://brainly.com/question/27243378

#SPJ1

A hole in a graph asymptote is a point where the curve of the graph does not go through, but instead veers away from the point and goes towards an infinite value.

A hole in a graph asymptote is a point at which the curve of the graph does not go through, but instead veers away from the point and goes towards an infinite value. This can occur when the graph is a function of two or more variables, and the asymptote is the line at which the graph tends towards infinity. As the graph approaches the asymptote, it will either increase or decrease in value. The hole in the asymptote is the point where the graph does not pass through and instead deviates from the asymptote and goes towards infinity. This is often seen when the graph is a graph of a rational function, where the asymptote is formed by the denominator of the function. A hole in the graph asymptote can also be caused by the fact that the graph is not continuous, or by the presence of multiple asymptotes. In this case, the hole is formed by the intersection of the two asymptotes.

Learn more about graph here

https://brainly.com/question/17267403

#SPJ4

By observing the concave nature of the polynomial graph , We can tell the leading coefficient is positive or negative .

Sums of terms with the form  kxⁿ, where K is any number and N is a positive integer, are known as polynomials.

The term with the greatest x power is the leading term in a polynomial function. The leading coefficient is the coefficient of the leading phrase.

If the polynomial graph is concave downwards, The leading coefficient is negative.

If the polynomial graph is concave upwards, The leading coefficient is positive.

To learn more about polynomials visit:

https://brainly.com/question/11536910

#SPJ4

The angle pair that forms alternate interior angles are: C. ∠4 and ∠6.

Alternate interior angles are angles that lie on alternate sides of a transversal but on different parallel lines. They are also congruent angles.

In the figure given, lines x and y are parallel to each other, and are crossed by the transversal a.

Angle 4 and 6 lie on each of the parallel lines but on alternate sides of the transversal a.

Also, angle 3 and angle 5 lie on lines x and y that are parallel which is intersected by line a.

Angles 3 and 5, and angles 4 and 6 are both pairs of alternate interior angles.

Therefore, the answer is: C. ∠4 and ∠6.

Learn more about the alternate interior angles on:

https://brainly.com/question/24839702

#SPJ1

The property of congruence illustrated in the statement is the transitive property.

The transitive property states that if A is congruent to B and B is congruent to C, then A is congruent to C. In other words, if two things are congruent to a third thing, they are also congruent to each other.

In the statement "If AB ≅ DE, EF ≅ DE then AB ≅ EF," AB is congruent to DE, and EF is congruent to DE, so AB must also be congruent to EF according to the transitive property.

The other properties you listed are not applicable in this case. The symmetric property states that if A is congruent to B, then B is congruent to A. The reflexive property states that every object is congruent to itself. And multiplication is not a property of congruence.

Learn more about the property of congruence at

https://brainly.com/question/2039214?referrer=searchResults

#SPJ4

The question is -

What property of congruence is illustrated in the statement? If AB ≅ DE, EF ≅ DE then AB ≅ EF.

a. Symmetric

c. Reflexive

b. Transitive

d. Multiplication

The equation does not include the value of 6, we can also express the solution as –[infinity], 6), which excludes the value of 6

The equation 5x - 10 ≤ 20 can be solved by isolating the x variable and rearranging the equation to solve for x. First, we need to add 10 to both sides of the equation in order to get all the terms on one side of the equation. This gives us 5x ≤ 30. Then, we need to divide both sides of the equation by 5 in order to isolate the x variable. This results in x ≤ 6. The solution for this equation can be written as the set of all real numbers less than or equal to 6, which can be represented as –[infinity], 6]. Since this equation does not include the value of 6, we can also express the solution as –[infinity], 6), which excludes the value of 6.

In more detail, when solving a linear inequality, the objective is to isolate the variable on one side of the inequality sign. The first step is to move all terms not containing the variable to the other side of the inequality sign by performing the opposite operation of the given equation. In this case, the equation 5x - 10 ≤ 20 has a subtraction on the left-hand side, so the opposite operation is to add 10 to both sides of the equation. This results in 5x ≤ 30.

Next, we need to divide both sides of the equation by 5 to isolate the x variable. This yields x ≤ 6. The solution for this equation is the set of all real numbers that are less than or equal to 6, which can be written as –[infinity], 6]. Since the equation does not include the value of 6, we can also express the solution as –[infinity], 6), which excludes the value of 6.

Learn more about Real numbers here :

https://brainly.com/question/10547079

#SPJ4

According to the given information [tex]C\left(x^2+(y-10)^2=225\right.\\[/tex] is the sprinkler's covered boundary is represented by equation.

The reference system is a two-dimensional surface created by combining two number lines. A single beam number line makes up the x-axis. The title of the vertically x axis, which is the other figure line, is the y-axis. The intersection of the two axes is the origin. To chart lines, arrows, and other objects, utilize the coordinate plane.

The convergence of the x-axis, a horizontally number line, and the y-axis, a horizontal figure line, creates a coordinate plane. The origin of something like the coordinate plane is the vertical intersection of a three axes (plural for axis).

[tex]\begin{aligned}& (x+k_1)^2+\left(y+k_2\right)^2=h \\& (0,10) . \quad k_1=0, \quad k_2=-10 \\& x^2+(y-10)^2=h \\& \text { to, } 25, \quad(0,-5) \\&\Rightarrow h=225 \quad \\& x^2+(y-10)^2=225\end{aligned}[/tex]

Hence, the equation is [tex]C\left(x^2+(y-10)^2=225\right.\\[/tex].

To know more about coordinate plane visit:

https://brainly.com/question/13611766

#SPJ1

Answer:

SAS proves congruence.

Step-by-step explanation:

⭐What is SAS?

⭐How do we determine if 2 triangles are congruent by SAS?

⭐Example (figures not drawn to scale):

Answer:

distribute

2 and r  ; 2 and + 3

2 * r = 2r

2 * 3 = 6

combine:

2r + 6

Step-by-step explanation:

Step-by-step explanation:

2 (r+3)

You are asked to multiply 2 by (r + 3).

To remove the ()'s, you must multiply 2 by both terms within the ()'s:

2(r + 3)

= 2 * r + 2 * 3

= 2r + 6

Please comment below if you have further questions for this problem.

Answer:

  x = -3

Step-by-step explanation:

You want the x-coordinate of the relative maximum of f(x) = x³ +4x² -3x +1.

The x-coordinates of the relative extrema of the function will be those values of x where the derivative of the function is zero.

  f'(x) = 3x² +8x -3 = (x +3)(3x -1)

The derivative is zero where its factors are zero, at x = -3 and x = 1/3.

The leading coefficient of this cubic is positive, so the function values generally increase from left to right. That means the relative maximum will have the lowest x-coordinate: x = -3

The x-coordinate of the relative maximum is -3.

The group of things from which data are taken for a statistical research is referred to as a population in statistics. A data pool for study might consist of numerous things, many individuals, etc.

large-scale numerical data collection and analysis, especially with the aim of extrapolating proportions in the total from those in a representative sample.

The study and development of techniques for gathering, processing, interpreting, and presenting empirical data are the focus of the science of statistics. It could be a collection of things, a gathering of people, etc. It serves as the study's data set.

To know more about statistics visit:-

https://brainly.com/question/29093686

#SPJ4

Let us take f(x)=x^2 to define the domain and range of a function.

The set of all values that the function might return when the domain is provided as input is the definition of range.

In real life, range is employed to perform mathematical computations. Range can be used to determine how much time has elapsed, just like when determining your age. You were born in 2005, which makes the current year 2020. What age are you?

The collection of all potential inputs for a function is its domain. For instance, the domain of f(x)=x^2 and g(x)=1/x are all real integers with the exception of x=0.

The collection of potential output values for a function is known as its range. For instance, the range is the non-negative real numbers for the function f(x)=x^2 on the domain of all real numbers (x∈R), which may be represented as f(x)0 (or [0,∞] using interval notation).

To learn more about range visit the link:

https://brainly.com/question/2264373

#SPJ4

Yes, two is the zero of the given polynomial  x³+ 4x²- 3x - 18 is the true statement.

As given in the question,

Given polynomial is equal to :

x³+ 4x²- 3x - 18

Check whether two is the zero of the given polynomial  x³+ 4x²- 3x - 18 we have,

let f(x) =  x³+ 4x²- 3x - 18

If f(2) = 0 then 2 is the zero of the given polynomial.

Substitute the value of x = 2 in f(x) we get,

f(2) = 2³ + 4(2)² -3(2) -18

⇒ f(2) = 8 + 16 - 6 -18

⇒ f(2) = 24 - 6 - 18

⇒ f(2) = 18 - 18

⇒f(2) = 0

Therefore, the two is the zero of the given polynomial  x³+ 4x²- 3x - 18 is the true statement.

The above question is incomplete , the complete question is:

Is 2 a zero of the polynomial x³+ 4x²- 3x - 18 ?

Learn more about polynomial here

brainly.com/question/11536910

#SPJ4

Answer:

x = 6

y = 2

(6,2)

Step-by-step explanation:

THE SOLUTION WORK IS ATTACHED

Answer:

60

Step-by-step explanation:

One way to do this is to take your total volume ([tex]120cm^{3}[/tex]) and divide that by the volume of each cube ([tex]2cm^{}[/tex]).

120 ÷ 2 = 60

The chef can make 60 cubes.

Let's check our work.

To check our work, we can take the volume of each cube, and multiply that by the number of cubes.

2 × 60 = 120

Therefore, the chef can produce 60 cubed watermelons.

The slope of the line is -7 and the y-intercept is negative 3. The line is drawn below.

The collection includes all locations on the surface of the shape (x, f(x)) that make up a function of f's graph. We may alternatively say that the graph of f is the curve of y = f. (x). As a result, the diagram of an equation is a particular instance of the graphs of functions.

A connection between a number of variables results in a linear model when a graph is displayed. The variable will have a degree of one.

The linear equation is given as,

y = mx + c

Where m is the slope of the line and c is the y-intercept of the line.

The equation is given below.

y = -7x - 3

More about the graph of the function link is given below.

https://brainly.com/question/27757761

#SPJ1

The intersection of the two lines represent the solution of the system of equations.

Hence the intersection of the two lines in this problem has the coordinates given as follows:

(2,1).

The definition of the system of equations in this problem is given as follows:

Replacing the second equation into the first, the variable x is obtained as follows:

x + 2(2x - 3) = 4

x + 4x - 6 = 4

5x = 10

x = 2.

Then, replacing x = 2 into the second equation, the variable y is given as follows:

y = 2(2) - 3 = 1.

The solution means that the linear functions x + 2y = 4 and y = 2x - 3 intersect at the coordinates (2,1).

More can be learned about a system of equations at https://brainly.com/question/24342899

#SPJ1

Domains having continuous boundaries, Lipschitz boundaries and C1 boundaries are three types of domain.

The collection of all potential inputs for a function is its domain. For instance, the domain of f(x)=x^2 and g(x)=1/x are all real integers with the exception of x=0. Additionally, we can define special functions with more constrained domains.

Consider the function y = f(x), which has the independent variable x and the dependent variable y. A value for x is said to be in the domain of a function f if it successfully allows the production of a single value y using another value for x.

There are three types of domain in mathematics. Domains having continuous boundaries, Lipschitz boundaries, C1 boundaries, and others are frequently thought of as types of domains. An exterior or external domain is the interior of a bounded domain's complement, whereas a bounded domain is a domain that is a bounded set.

To learn more about domain visit the link:

https://brainly.com/question/26098895

#SPJ4

A vertical asymptote example is a graph that shows an equation such as 1/x approaching infinity as x approaches 0. In this example, x = 0 is the vertical asymptote.

A vertical asymptote is a line on a graph that represents the point at which a function approaches infinity or negative infinity. In other words, it is the point at which the graph of the function becomes infinitely steep. An example of a vertical asymptote is the equation 1/x. As x approaches 0, the value of 1/x approaches infinity. This is represented on the graph of the equation as a vertical line at x = 0. This line is the vertical asymptote. A vertical asymptote indicates that the domain of the function does not include the point at which the asymptote occurs. This is because a function cannot approach infinity. Thus, the equation 1/x is not defined at x = 0.

Learn more about graph here

https://brainly.com/question/17267403

#SPJ4

The roots of the quadratic equation 3x²-14x-5 = 0 are 5, -1/3

The meaning of quadratic equation is any equation containing one term in which the unknown is squared and no term in which it is raised to a higher power.

Given that, a quadratic equation, 3x²-14x-5 = 0

On factorizing, we get,

3x²-14x-5 = 0

3x(x-5)+1(x-5) = 0

(3x+1)(x-5) = 0

(x-5) = 0

x = 5

And,

(3x+1) = 0

x = -1/3

Hence, The roots of the quadratic equation 3x²-14x-5 = 0 are 5, -1/3

For more references on quadratic equation, click;

https://brainly.com/question/17177510

#SPJ4

In 1 gallon contains 768 ounces.

In the given, 1 cup = 8 ounce

4 cups = 1 quart

4 quart = 1 gallon

We can see that, 1 gallon is 4 quarts,

So, 6 gallon = 6×4= 24 quarts

Also 1 quart is 4 cups

So, 24 quarts =24×4=96 cups

1 cup is 8 ounce

So, 96 cups = 96×8=768 ounces

Therefore, 768 ounce in 1 gallon.

For such more questions about mathematical operations:

https://brainly.com/question/18018398

#SPJ4

There will be 128 ounce in 1 gallon.

given values in the question:

 1 gallon = 4 quarts

 1 quarts = 4 cups  

 so we have 16 cups in 1 gallon .

next we are given in the question that:

  1  cup = 8 ounce

and in 1 gallon we have 16 cups .

and we have to find number of ounce 1 gallon have , number of ounce have direct relation with number of cups.

so in 1 gallon , we have 16* value of 1 cup in ounce

hence value of 1 gallon = 16 * 8 ounce

=> 1 gallon = 128 ounce

To know more about ounce click on below link:

https://brainly.com/question/26950819#

#SPJ4

Answer:

[tex]x^3+x^2-5x+5-\frac{30}{x+5}[/tex]

Step-by-step explanation:

[tex]\frac{x^4 + 6x^3 -20x-5}{x+5} \\ \\ =\frac{x^3(x+5)+x^3-20x-5}{x+5} \\ \\ =\frac{x^3(x+5)+x^2(x+5)-5x^2-20x-5}{x+5} \\ \\ =\frac{x^3(x+5)+x^2(x+5)-5x(x+5)+5x-5}{x+5} \\ \\ =\frac{x^3(x+5)+x^2(x+5)-5x(x+5)+5(x+5)-30}{x+5} \\ \\ =x^3+x^2-5x+5-\frac{30}{x+5}[/tex]

Answer:

AO = 14

Step-by-step explanation:

The figure we are given shows the intersection of the medians of this triangle. In fact, the point of intersection of the medians is called the centroid. In this problem, O is the centroid.

The intersection of the medians of a triangle has some properties:

(1) The distance from a vertex of the triangle to the centroid is 2/3 of the distance from said vertex to the opposite side of the vertex

(2) The distance from the centroid to a side opposite of a vertex is 1/3 of the distance from said vertex to the opposite side of said vertex

(3) The longer part of the median partitioned by the centroid is twice the distance of the shorter part of said median partitioned by the centroid

We can use the first property stated to find the distance of AO.

[tex]AO = \frac{2}{3} AM[/tex]

We are given that AM = 21

[tex]AO = \frac{2}{3}(21)[/tex]

[tex]AO = \frac{42}{3}[/tex]

[tex]AO = 14[/tex]

with the Application of Analytical geometry a dotted line is used to mark x=3  inequalities on a number line

what is Analytical geometry ?

Combining algebra and geometry is called analytical geometry. Analytical geometry aims to present geometric figures through algebraic equations in either a two-dimensional or three-dimensional domain.

solution:

The graph below shows the inequality 3.

All points that lie in the shaded area satisfy the equation x<3.

In other words, x can take any value less than 3.

x≠3 or any number that is greater than 3.

Since there is strict inequality,

i.e., x<3, the points that lie on the line

x=3 will not satisfy the equation.

Therefore, a dotted line is used to mark x=3.

To learn more about Analytical geometry from the given link

https://brainly.com/question/23036034

#SPJ4

90 degrees or a straight angle is always one angle. The hypotenuse is the side that has an angle of 90° on it. Always, the hypotenuse is the longest side. The remaining two inner angles add up to a total of 90°.

Right angles are created when two straight lines cross at a 90° angle or are perpendicular to one another at the intersection.

An angle having a value of 90° is considered to be a right angle. Right angles are created when two rays cross one other and angle 90 degrees at the intersection. The screen of a mobile phone, the borders of a cabinet, and other places are only a few examples of where we might see it.

90 degrees or a straight angle is always one angle. The hypotenuse is the side that has an angle of 90° on it. Always, the hypotenuse is the longest side. The remaining two inner angles add up to a total of 90°.

To know more about right angle visit:-

https://brainly.com/question/7116550

#SPJ4

The step that is the same when bisecting segments and angles is "Draw a ray from the vertex to another point."

When bisecting a segment, you must draw a line that divides the segment into two equal parts. One way to do this is to draw a ray with one endpoint at the midpoint of the segment and the other endpoint at any point beyond the segment. This ray will bisect the segment. When bisecting an angle, you must draw a line that divides the angle into two equal angles. One way to do this is to draw a ray from the vertex of the angle to any point on the angle. This ray will bisect the angle.

Learn more about Segments here:

https://brainly.com/question/28554913

#SPJ4

Answer: Mark the intersection points of the arcs.

Step-by-step explanation: Draw a ray with one endpoint. is incorrect

The algebraic expression for 10 more than a number is x + 10 or 10 + x.

The x in the expression is called a variable, which can be represented by any letter in the alphabet.

An algebraic expression is a mathematical expression that consists of numbers, variables and operators, and its value can change.

Some basic mathematical operators are +, -, x and /.

The given phrase states that a result can be obtained by adding 10 more to the variable.

The variable x can be replaced by any number.

If x equals 2, then the expression x + 10 has a value of 12.

To know more about algebraic expression visit brainly.com/question/953809

#SPJ4