Although ECC memory costs more than non-ECC memory, why would you choose to use it? Which type of computer typically requires ECC memory?

B. Ethertype field immediately follows the start frame delimiter in an Ethernet frame.

The start frame delimiter is a 8-byte sequence that marks the beginning of an Ethernet frame. After this, the Ethertype field follows which specifies the type of protocol being used in the data portion of the frame. This field is used to determine how the data in the payload section of the frame should be processed. The Destination Media Access Control (MAC) address follows the Ethertype field, which specifies the destination device to which the frame is being sent. After the destination MAC address, the source MAC address is included in the frame. Finally, the payload section contains the actual data being transmitted. Lastly, a Frame Check Sequence (FCS) is added at the end of the frame to ensure that the data was accurately transmitted.

Learn more about Ethertype field here:

https://brainly.com/question/31577895

#SPJ11

The instruction that can best be used to turn an output coil on or off after the ring has been false for a desired time is the TOF (Timer Off Delay) instruction. Option D.

The TOF instruction turns on an output coil after a timer has timed out, which occurs when the timer has been enabled and the preceding logic has been false for a desired time.

This instruction is commonly used in applications where a process must be started or stopped after a specific time delay.

Option D (TOF) is the correct answer.

Option A (RTOC.ON OR ONOF) is not a valid instruction in most PLC programming languages, and option B (TON) is used to turn on an output coil after a timer has been enabled and the preceding logic has been true for a desired time.

For similar questions on Desired Time

https://brainly.com/question/15585705

#SPJ11

The parameter that determines the time duration for the timing circuit in a timer is the preset time. Option b is answer.

The preset time is the value that is set in the timer to determine how long the timing circuit should run before the timer's output changes state. When the timer receives an input signal, it begins counting down from the preset time to zero. Once the timer reaches zero, the output changes state.

The other options listed are also timer parameters, but they do not directly determine the time duration for the timing circuit:

Accumulated time: This is the total time that the timer has accumulated since it was last reset. It is not used to determine the time duration for the timing circuit, but rather to keep track of how much time has elapsed since the timer was last reset.

Timer address: This is the address of the timer in the PLC's memory. It is not directly related to the time duration for the timing circuit.

Time base: This is the interval at which the timer updates its count. It is not used to determine the time duration for the timing circuit, but rather to set the resolution of the timer.

Option b is answer.

You can learn more about timer at

https://brainly.com/question/14316896

#SPJ11

A tsunami watch is issued by the Pacific Tsunami Warning Center when a large earthquake occurs in the Pacific Ocean that has the potential to generate a tsunami. They detect an earthquake or other event that has the potential to generate a tsunami in the Pacific Ocean.

The watch is issued as a precautionary measure to alert coastal communities to the possibility of a tsunami and to encourage them to prepare for the worst-case scenario. The warning center monitors seismic activity and sea level readings to determine the likelihood of a tsunami and will issue a warning if there is a high probability of a tsunami reaching the coastline. It is important to take tsunami watches and warnings seriously and follow evacuation orders to ensure the safety of yourself and others.
The watch is issued to alert affected coastal regions and help them prepare for a possible tsunami, allowing residents and officials to take necessary precautions and monitor the situation closely.

Learn more about seismic activity here:

brainly.com/question/30667043

#SPJ11

A tsunami watch is issued by the Pacific Tsunami Warning Center when there is a possibility of a tsunami occurring in the Pacific Ocean, usually due to an earthquake or other seismic event.

Tsunamis are massive waves that result from seismic activity or volcanic eruptions beneath the ocean. When formed in the open sea, the height of the waves remains relatively constant. However, as the waves approach the shore, they gather momentum and grow taller due to the decreasing depth of the water.

This watch serves as an early warning to coastal areas, allowing them to prepare for a potential tsunami.

Learn more about Tsunamis: https://brainly.com/question/11687903

#SPJ11

As the angle of bank is increased, the vertical component of lift decreases while the horizontal component of lift increases.

This is due to the fact that the lift generated by the wings is split into two components: the vertical lift that opposes the force of gravity, and the horizontal lift that allows the aircraft to turn. When the angle of bank is increased, more of the lift is directed horizontally to turn the aircraft, causing a decrease in the vertical lift component. However, the horizontal lift component increases to maintain the overall lift necessary for flight.

To learn more about vertical click the link below:

brainly.com/question/18084516

#SPJ11

When threadless couplings and connectors are used with rigid metal conduit and buried in masonry or concrete, they shall be of the concrete-tight type. This is specified in article 344-42(A) of the National Electrical Code (NEC). The concrete-tight type of coupling or connector ensures that no moisture or other substances can penetrate the conduit system and potentially damage the electrical components. Threadless couplings and connectors are designed to provide a strong and secure connection between sections of rigid metal conduit, without the need for threading. This makes installation faster and easier, as well as reducing the risk of damage to the conduit.

In summary, when using threadless couplings and connectors with rigid metal conduit in masonry or concrete, ensure they are of the concrete-tight type to maintain a secure and moisture-resistant connection.

Learn more about concrete here: brainly.com/question/28903866

#SPJ11

"Making data look like it has come from a different source is called"

Hi! Making data look like it has come from a different source is called data spoofing.

Learn more about different source: https://brainly.com/question/896456

#SPJ11

The interior metal water pipe system of a building or structure supplied by a feeder must be connected using a conductor no less than 6 AWG.

The purpose of this code requirement is to guarantee that the internal metal water pipe system is adequately grounded and bonded to reduce the risk of electric shock. Any stray electrical currents can be safely routed to ground by using a 6 AWG conductor to give an adequate path for fault current to travel. Because it must be able to handle the highest possible fault current that could pass through the system, the conductor's size is crucial. The risk of electrical shock is significantly decreased by properly connecting the interior metal water pipe system, creating a safer environment for passengers.

learn more about structure here:

https://brainly.com/question/30000720

#SPJ11

"Friction course typically uses PG 64-22 or PG 70-22 binders in its makeup to provide high skid resistance and improved durability."

A friction course, also known as a high friction surface treatment, is a type of pavement surface treatment used to improve the skid resistance of roadways, particularly in wet or slippery conditions. The friction course is composed of a layer of high-quality aggregates, typically granite or quartz, and a polymer-modified asphalt binder that provides excellent adhesion and durability. The polymer-modified binder used in the friction course is often a Performance Grade (PG) binder, which is selected based on its high-temperature performance and resistance to rutting and cracking. PG 64-22 and PG 70-22 binders are commonly used in friction courses due to their high-temperature viscosity, which helps to maintain aggregate embedment and prevent stripping, as well as their low-temperature stiffness, which provides excellent skid resistance in cold weather conditions.

Learn more about friction course here:

https://brainly.com/question/13684931

#SPJ11

True, TFFN can be described as stranded fixture wire with thermoplastic insulation and a nylon cover.

A thermoplastic is a class of polymer that can be softened through heating and then processed using methods such as extrusion, injection moulding, thermoforming and blow moulding.

Thermoplastics harden once cooled and do not show any changes in chemical property after being heated and cooled multiple times, making them easily recyclable.

Amorphous and Semi-crystalline Thermoplastics

Thermoplastics are made by joining small molecules, called monomers, together to form long chains using a process called polymerisation. A single polymer chain can be made from many thousands of monomers. The atoms in a polymer chain are joined by strong covalent bonds, whereas the forces between chains are weak.

Depending on the type of monomer, polymer chains may have side branches. If a polymer chain has only a few, short side branches then the chains can form ordered, crystalline regions, called spherulites. However, if the chain has many large side branches, then it is not possible for ordered regions to be formed and the polymer is amorphous.

learn more about  thermoplastic here:

https://brainly.com/question/29596428

#SPJ11

Electrical potential refers to the amount of electric charge per unit of electrical potential energy, measured in volts.

Low voltage equipment that is frequently in contact with the bodies of person or has exposed current carrying elements shall operate on an electrical potential of 30 volts or less.

This is because low voltage is typically defined as 50 volts or less, but for safety reasons, it is recommended to use 30 volts or less for equipment that is in contact with the human body.

According to the Low Voltage Directive (Directive 2014/35/EU), which applies to electrical equipment operating in the European Union, the voltage limits for low voltage equipment are between 50V and 1000V for AC and 75V and 1500V for DC1. The voltage limits relate to the voltage of the electrical input or output, not to voltages generated within the equipmen

Learn more on Voltage : brainly.com/question/31493810

#SPJ11

(310) TFE-insulated conductors are manufactured in sizes from No. 14 through No. 2.

In electrical engineering, a conductor is a material that allows electrical current to flow through it easily. Conductors are essential components in electrical systems as they provide a low resistance path for electrical energy to flow. Metals are commonly used as conductors due to their high electrical conductivity, low cost, and availability. Copper is one of the most commonly used materials for electrical conductors due to its high conductivity, durability, and resistance to corrosion. Other materials used as conductors include aluminum, silver, gold, and iron. The size of a conductor is specified by its gauge, which is a measure of its cross-sectional area.

Learn more about conductors here:

https://brainly.com/question/20102785

#SPJ11

Driving involves multiple parts of the Highway Transportation System (HTS), including the driver, the vehicle, the roadway, and other users of the roadway. In this scenario, all of these parts of the HTS were involved in the trip to the store and back home.

In your scenario, several parts of the Highway Transportation System (HTS) were involved. Here's a step-by-step breakdown:

1. Drive: You actively participated in the HTS by driving your vehicle to the store.
2. HTS: The HTS itself includes roadways, vehicles, and people. In this case, you used the roadways to reach the store, drove a vehicle, and interacted with other road users such as pedestrians and other drivers.
3. Involved: By driving to the store and back home, you engaged with multiple components of the HTS, including traffic signals, signs, and possibly interactions with other vehicles and pedestrians.

In summary, you were involved in various parts of the HTS during your trip to the store and back home.

Learn more about HTS here:

brainly.com/question/29572310

#SPJ11

True.

According to Executive Order 13526, using the derivative classification concept of compilation, the classifier must place a clearly worded explanation of the basis for classification by compilation on the face of the document or include it in the text.

The recipient of the information understands why the information has been classified and how the classification determination was made.

Classification by compilation is the process of combining two or more unclassified items of information to create a new document or record that is classified at a higher level than the individual components.

This means that the classification of the new document is based on the classification of the original documents or records.

The compilation concept, the classifier must ensure that the sources of the information are identified and that each source is appropriately marked with its classification level.

Additionally, the classifier must ensure that the new document's classification level is consistent with the highest classification level of the sources used.

The use of derivative classification by compilation requires careful consideration and documentation to ensure that the resulting document's classification level is accurate and properly reflects the sources used to create it.

For similar questions on derivative

https://brainly.com/question/31017170

#SPJ11

A joist is a structural element typically made of wood, steel, or other materials that is used to provide support in building construction. Joists are commonly used in framing to hold up a floor or to provide horizontal support in walls, roofs, and ceilings. They are usually spaced apart and run parallel to each other, forming the framework that supports the load of the structure above. Joists are an essential component in the construction of buildings, providing stability and structural integrity.

In some cases, joists may also be used as a support for sheetrock or other finishes, but their primary purpose is to provide support for floors and horizontal elements in construction. A joist is a horizontal structural member that runs parallel to the ground and is used to support a floor or ceiling. It can also be used as a horizontal support for other structures, such as decks or balconies, but it is not typically used as a roof-only support. Additionally, while a joist can provide support for sheetrock, this is not its primary function.

learn more about Joist here:

https://brainly.com/question/29999823

#SPJ11

The observed orbital decay provides strong support for the prediction that neutron star binaries radiate gravitational waves, as predicted by general relativity.

Einstein's general theory of relativity predicts that two orbiting neutron stars should radiate gravitational waves because the orbits should slowly lose energy in the form of these waves, causing the two stars to gradually spiral closer together. As the neutron stars move closer together, their orbital period should decrease. This is because the gravitational force between the two stars is proportional to the inverse square of the distance between them, so as they get closer, the force becomes stronger and they move faster. Observations of neutron star binaries have indeed shown that their orbital periods are decreasing over time, in a manner consistent with the predictions of general relativity. This decrease in orbital period is known as "orbital decay" and it has been measured very precisely using techniques such as pulsar timing.

Learn more about gravitational waves here:

https://brainly.com/question/29607077

#SPJ11

Pinewood Studios played a significant role in the construction boom that occurred in the UK during the 20th century.

The studio complex, located in Buckinghamshire, was established in 1936 and quickly became one of the most important production hubs for the British film industry.

As demand for film and television production increased, Pinewood expanded to include additional soundstages, backlots, and post-production facilities.

The studio's success also led to the growth of related industries, such as visual effects and prop manufacturing, in the surrounding area.

Today, Pinewood is known for hosting major film franchises like James Bond and Star Wars, and continues to be a vital part of the UK's creative economy. Its legacy as a symbol of British filmmaking excellence is sure to endure for years to come.

Learn more about film production at

https://brainly.com/question/30554574

#SPJ11

The correct answer for the first question is: public class DressShirt extends Shirt, Clothing. The correct answer for the second question is: protected members of Clothing.

The correct answer for the third question is: Call the Clothing constructor. To make the class DressShirt inherit the functionality of both Clothing and Shirt, its class header would bethe class shirt extends the clothing class. to make the class dress shirt inherit the functionality of both clothing and shirt its class header would be.

public class DressShirt inherits Shirt, Clothing public class DressShirt inherits Shirt public class DressShirt extends Shirtpublic class DressShirt extends Shirt, Clothing. Your answer: public class DressShirt extends Shirt If Shirt inherits Clothing, then Shirt has direct access to the members of Clothing, Your answer: Call the Clothing constructor.

To know more about DressShirt:- https://brainly.com/question/31491617

#SPJ11

The correct answer to the first question is: public class DressShirt extends Shirt, Clothing constructor.

The correct answer to the second question is: public and protected.

The correct answer to the third question is: Call the Clothing constructor.

Learn more about Clothing constructor: https://brainly.com/question/13267121

#SPJ11

In general, a single-ranked DIMM gives better performance than a dual-ranked DIMM.

Single-ranked DIMMs have a single set of memory chips that are accessed by the memory controller, while dual-ranked DIMMs have two sets of memory chips that are accessed in parallel. This means that dual-ranked DIMMs can be slower than single-ranked DIMMs because they require more time to access the same amount of data. In addition, dual-ranked DIMMs can be more difficult for the memory controller to manage, which can lead to decreased performance.

However, dual-ranked DIMMs do have the advantage of being able to provide more memory capacity per module, which can be useful in some situations where a large amount of memory is required.

You can learn more about DIMM at

https://brainly.com/question/13397132

#SPJ11

The purpose of the coupling agent in ultrasonic testing is to transmit and act as a medium for ultrasonic waves. Therefore, the correct answer is (b).

Ultrasonic testing (UT) is a non-destructive testing method that uses high-frequency sound waves to detect and characterize flaws or defects in materials. In UT, a transducer generates sound waves that travel through the material being tested. When these sound waves encounter a flaw, some of the energy is reflected back to the transducer and detected, allowing for the detection and characterization of the flaw.

However, for the sound waves to travel efficiently from the transducer to the material being tested, a coupling agent is needed. The purpose of the coupling agent is to provide a medium that can transmit the ultrasonic waves from the transducer to the material without significant loss of energy due to reflection or refraction at the air/material interface.

Typically, a liquid is used as a coupling agent in UT, such as water or glycerin. The liquid fills the gap between the transducer and the material being tested, allowing the ultrasonic waves to pass through the liquid and into the material. The liquid also helps to eliminate any air pockets that may exist between the transducer and the material, which can interfere with the transmission of the ultrasonic waves.

The purpose of the coupling agent in ultrasonic testing is to transmit and act as a medium for ultrasonic waves. Therefore, the correct answer is (b).

Learn more about Ultrasonic testing

brainly.com/question/17296114

#SPJ11

Division 2 location where a motor is used, space heaters are used during shutdown periods to prevent condensation and maintain a safe operating temperature within the motor. This helps to protect the motor from potential damage caused by moisture or temperature changes.

The operating temperature of the motor in Fahrenheit is approximately 97°F.

To find the operating temperature of the motor in Fahrenheit, we need to first convert the ambient temperature from Fahrenheit to Celsius, add the self heating temperature in Celsius, and then convert the result back to Fahrenheit. We can use the following formulas to convert between Fahrenheit

The auxiliary electromagnetic unit (APU) is a small gas turbine engine mounted in the tail cone of an aircraft to provide autonomous electrical and mechanical power for the following: Starting power for the main engines.

Learn more about   operating temperature here

https://brainly.com/question/28270063

#SPJ11

By addressing these key components in a pre-construction conference, stakeholders can establish a shared understanding of project expectations, identify potential risks and challenges, and develop strategies to ensure that the project is completed on time, within budget, and to the required quality standards.

Pre-construction conferences are an important aspect of construction project management that bring together key stakeholders to discuss project plans, specifications, and requirements prior to the start of construction. The key components of a pre-construction conference may include: Project scope: This involves discussing the project's goals, objectives, and requirements to ensure that all stakeholders have a clear understanding of the project's scope. Project schedule: This involves reviewing the project timeline and identifying key milestones, deadlines, and critical path activities to ensure that the project stays on track. Project budget: This involves discussing the project budget and identifying any cost constraints, opportunities for cost savings, and potential cost overruns. Roles and responsibilities: This involves clarifying the roles and responsibilities of all stakeholders involved in the project, including contractors, architects, engineers, project managers, and other team members. Quality control and safety: This involves discussing quality control measures and safety protocols to ensure that the project is completed to the required standards and that all workers are protected from harm. Communication and documentation: This involves establishing communication protocols and identifying the key documents and reports that will be used to track project progress, manage changes, and resolve issues as they arise.

Learn more about pre-construction conference here:

https://brainly.com/question/28094463

#SPJ11

In addition to saving physical space and energy, virtual servers offer other benefits such as improved reliability, easier backup and disaster recovery, and increased scalability.

Virtual servers can help consolidate multiple machines into one box, saving floor space and electricity. A virtual server is a software-based emulation of a physical server that can run multiple operating systems and applications on a single physical machine. By using virtualization technology, businesses can reduce their hardware costs, minimize energy consumption, and improve resource utilization. With virtual servers, multiple virtual machines can be created and hosted on a single physical server. Each virtual machine has its own operating system, applications, and resources, but they all share the same physical resources of the host machine. This means that businesses can run multiple servers on a single box, saving space and reducing energy consumption.

Learn more about virtual servers here:

https://brainly.com/question/30887550

#SPJ11

The frequencies Zigbee operates on are 2.4 GHz, 900 MHz, and 868 MHz.. These frequencies are part of the ISM.

Zigbee operates on three main frequencies, which are 2.4 GHz, 900 MHz, and 868 MHz. These frequencies are part of the ISM (industrial, scientific, and medical) bands, which means that they are unlicensed and can be used by anyone.

The 2.4 GHz frequency is the most commonly used frequency for Zigbee devices and is also used by other wireless technologies like Wi-Fi and Bluetooth. The 900 MHz and 868 MHz frequencies are typically used for longer-range communications, making them ideal for applications like smart grid and industrial automation.

Overall, Zigbee's ability to operate on multiple frequencies makes it a versatile and reliable wireless technology for a wide range of applications.

Know more about the  wireless technology

https://brainly.com/question/29501914

#SPJ11

The rotating portion of a motor that is made of iron or copper bars bound on both ends with aluminum is called the rotor. The rotating portion of a motor that is made of iron or copper bars bound on both ends with aluminum is called the C. rotor.

The rotating portion of a motor is responsible for converting electrical energy into mechanical energy. In the case of the given description, the rotating portion is made of iron or copper bars that are bound on both ends with aluminum. This description matches the characteristics of the rotor.The rotor is a key component of a motor and is responsible for rotating the shaft. The rotor consists of a cylindrical core made of iron or steel laminations, which are slotted to hold the rotor conductors. In the case of copper bars bound on both ends with aluminum, the aluminum serves as end rings that hold the bars together.When an electrical current is applied to the rotor, it creates a magnetic field that interacts with the magnetic field of the stator, which is the stationary portion of the motor. This interaction produces the torque required to rotate the shaft.The other options given in the question are not applicable to the description provided. The stator is the stationary portion of the motor that surrounds the rotor and contains the windings. The end bell is the cover at the end of the motor that protects the rotor and stator. The winding refers to the coiled wire that is wound around the stator to create the electromagnetic field.

To learn more about aluminum click on the link below:

brainly.com/question/9496279

#SPJ11

The rotating portion of a motor that is made of iron or copper bars bound on both ends with aluminum is called the rotor. The answer is option C. rotor.

The rotating portion of a motor that is made of iron or copper bars bound on both ends with aluminum is called the rotor. It can be referred to as the moving part in an electromagnetic system of the motor, generator and an alternator. It is also known as the Flywheel, rotating magnetic core, an alternator.

In an alternator, it includes permanent magnets that move approximately to the iron plates of the stator to produce an AC (Alternating Current). Existing motion is used for its function. The rotation of this can be occurred because of the interaction between magnetic fields & the windings which generate torque in the region of the axis.

Learn more about motor: https://brainly.com/question/18619348

#SPJ11

In order to find the Degrees of freedom of a system, you need to first identify the number of equations and the number of unknowns in the system.

The degrees of freedom of a system refers to the number of variables that can be independently varied to reach a solution. Suppose you have a system of three equations with three unknowns:

x + 2y + 3z = 10

2x - y + z = 5

3x + y - z = 0

The three equations and three unknowns means that the system has a unique solution and the DOF is zero. In other words, you cannot independently vary any of the variables in this system.

In general, the DOF of a system can be calculated as follows:

DOF = number of unknowns - number of independent equations

If DOF is zero, then the system has a unique solution. If DOF is greater than zero, then there are infinitely many solutions. If DOF is less than zero, then the system is overdetermined and there may not be a unique solution.

Learn more about degrees of freedom here:

https://brainly.com/question/28527491

#SPJ1

On a wing, the force of lift acts perpendicular to the relative wind and the force of drag acts parallel to the flightpath. Option b is answer.

The chord line is an imaginary straight line that connects the leading edge to the trailing edge of the wing and the longitudinal axis is an imaginary line that runs through the center of the airplane from nose to tail. The force of lift is generated due to the difference in air pressure on the top and bottom surfaces of the wing, and it acts perpendicular to the relative wind, which is the direction of the airflow relative to the wing.

The force of drag, on the other hand, is generated due to the resistance of the air to the motion of the airplane through it, and it acts parallel to the flightpath of the airplane.

Option b is answer.

You can learn more about flightpath at

https://brainly.com/question/29119301

#SPJ11

According to the National Electrical Code (NEC) section 408.36, not more than 42 overcurrent devices of a lighting and appliance branch circuit panel board shall be installed in any one cabinet or cutout box.

According to the National Electrical Code (NEC) 2021 edition, section 408.36, not more than 42 overcurrent devices of a lighting and appliance branch circuit panel board shall be installed in any one cabinet or cutout box, unless the cabinet or cutout box is listed for more. This limitation is to ensure that the electrical panel does not become overcrowded with too many overcurrent devices, which could lead to overheating and potential fire hazards. The 42 device limit applies to circuit breakers, fuses, or a combination of both. It is important to follow this requirement when installing or modifying an electrical panel to ensure compliance with the NEC and to ensure the safety of the building's occupants.

Learn more about circuit here-

https://brainly.com/question/27206933

#SPJ11

Based on the information provided, it appears that the apparatus in question, as described on the control drawing, is exempt from the requirement to be listed according to code section 504.4. However, without additional context or details, it is difficult to provide a more specific answer.

Based on the provided information, it seems like component you're referring to a section of the National Electrical Code (NEC). In the context of your question, it can be interpreted as follows:Per section 504.4 of the NEC, apparatus that is detailed on a control drawing and meets the specified requirements does not need to be listed separately. This means that if the apparatus is correctly documented and adheres to the guidelines, additional listing is not mandatory.

Learn more about component here

https://brainly.in/question/34854484

#SPJ11

IO device utilization and CPU utilization conflict because they both demand system resources.

When a system is heavily utilizing IO devices, it can cause a bottleneck in the system, as the CPU may have to wait for the IO devices to complete their operations before it can continue processing instructions. This can result in a decrease in CPU utilization, as the CPU is idle while waiting for IO operations to complete.
On the other hand, when the CPU is heavily utilized, it can cause a bottleneck in the system, as IO devices may have to wait for the CPU to process instructions before they can start processing data. This can result in a decrease in IO device utilization, as the IO devices are idle while waiting for the CPU to finish processing.
To optimize system performance, it is important to balance IO device utilization and CPU utilization, ensuring that neither resource is overly burdened and that data processing is efficiently distributed between the CPU and IO devices.
When IO devices (such as keyboards, mice, or storage devices) are used extensively, they consume system resources like memory and processing time. This can lead to reduced CPU utilization, as the CPU must devote time to manage IO operations instead of focusing on executing other tasks. Consequently, a balance between IO device utilization and CPU utilization is essential for optimal system performance.IO device utilization refers to the amount of time an IO device, such as a hard drive or network adapter, is actively processing data. CPU utilization refers to the amount of time the CPU is actively processing instructions.

To know more about IO devices, click here:

https://brainly.com/question/3668486

#SPJ11