The magnetic field that is required to bend the charged particle into a circular path is 1.42×10⁻³ T.
To calculate the magnetic field strength required to bend alpha particles into a circular path of radius r = 0.14 m, we can use the equation:
[tex]B = \frac{m\times v}{q\times r}[/tex]
where B is the magnetic field strength, m is the mass of the alpha particle, v is its velocity, q is its charge, and r is the radius of the circular path.
Plugging in the given values, we get:
[tex]B = \frac {6.6\times 10^{-27} \ kg \times 1.8\times 10^6 \ m/s} { 2e \times 0.14 \ m}[/tex]
where 2e represents the charge of the alpha particle.
Simplifying this equation, we get:
B = 1.42×10⁻³ T
Therefore, a magnetic field strength of 1.42×10⁻³ T would be required to bend alpha particles with charge q = +2e and mass m = 6.6×10⁻²⁷ kg into a circular path of radius r = 0.14 m.
Learn more about the magnetic field:
https://brainly.com/question/7645789
#SPJ11
An electric field E points toward you, and its magnitude is increasing. Will the induced magnetic field be clockwise or counterclockwise? What if E points away from you and is decreasing?
When the electric field is pointing towards you and its magnitude is increasing the induced magnetic field will be clockwise and when the electric field is pointing away from you and its magnitude is decreasing the induced magnetic field will be clockwise.
According to Faraday's law of electromagnetic induction, a changing electric field induces a magnetic field. The direction of the induced magnetic field can be determined using Lenz's law, which states that the direction of the induced magnetic field is such that it opposes the change that produced it.
In the first scenario, the electric field E points toward you, and its magnitude is increasing. This means that the flux through a hypothetical loop perpendicular to the electric field and with an area vector pointing in the direction of the electric field is increasing. According to Lenz's law, the induced magnetic field will be in a direction such that it opposes the increase in the flux. Therefore, the induced magnetic field will be clockwise.In the second scenario, the electric field E points away from you and its magnitude is decreasing. This means that the flux through a hypothetical loop perpendicular to the electric field and with an area vector pointing in the direction opposite to the electric field is decreasing. According to Lenz's law, the induced magnetic field will be in a direction such that it opposes the decrease in the flux. Therefore, the induced magnetic field will be clockwise.In summary, when an electric field is changing, the direction of the induced magnetic field is such that it opposes the change that produced it, regardless of the direction of the electric field.
Learn more about Lenz's law:
https://brainly.com/question/23087655
#SPJ11
A wrench with a diameter of 0.51 meter generates a torque of 155 Nm on a screw. Calculate the force applied in Newtons. (r = rF) 155 N 607.8 N 39.53 N 0 0.00165 N
The force applied is approximately 607.8 Newtons.
The formula for torque is T = rF, where T is torque, r is the radius or distance from the center of rotation to the point of force application, and F is the force applied.
We are given the diameter of the wrench, which is 0.51 meter. The radius is half the diameter, so r = 0.255 meter.
We are also given the torque, which is 155 Nm.
Using the formula T = rF and solving for F, we get:
F = T / r = 155 Nm / 0.255 m = 607.8 N
Therefore, the force applied on the screw is 607.8 Newtons.
Learn more about force here:
https://brainly.com/question/13191643
#SPJ11
The correct option is B, The force applied in Newtons is approximately 607.84 N.
torque = force x lever arm
The diameter of the wrench is 0.51 meters, and the lever arm (r) is:
r = 0.51 / 2 = 0.255 meter
Substituting the values given in the formula, we get:
155 Nm = force x 0.255 meter
Solving for force, we get:
force = 155 Nm / 0.255 meter = 607.84 N
Force is a concept that describes the interaction between two objects that results in a change in motion. A force can be defined as any influence that causes an object to undergo acceleration or deformation. The unit of force in the International System of Units (SI) is the newton (N), which is defined as the amount of force required to give a mass of 1 kilogram and an acceleration of 1 meter per second squared.
Forces can be categorized into two main types: contact forces and non-contact forces. Contact forces occur when two objects physically touch each other, while non-contact forces act at a distance, such as gravitational, electric, and magnetic forces. Forces can also be represented using vectors, with magnitude and direction. The net force acting on an object is the vector sum of all the individual forces acting on it.
To learn more about Force visit here:
brainly.com/question/30526425
#SPJ4
1.(3) The line of longest wavelength in visible light for the emission spectrum of hydrogen, 656nm (Balmer series), would correspond to what electronic transition?
2.(7) Explain the wave-particle duality of matter and light. Why don’t we notice this effect in everyday activities? What do electrons behave most like in an atom?
In an atom, electrons behave most like waves, with their behavior being described using quantum mechanics.
1. The line of longest wavelength in visible light for the emission spectrum of hydrogen, 656nm (Balmer series), corresponds to the electronic transition from the n=3 energy level to the n=2 energy level. This transition results in the emission of a photon with a wavelength of 656nm.
2. The wave-particle duality of matter and light refers to the fact that both matter and light can exhibit both wave-like and particle-like properties depending on how they are observed or measured. Electrons, for example, can behave like waves when they exhibit interference patterns in experiments such as the double-slit experiment, but also like particles when they are observed as discrete individual particles. Similarly, light can behave like a wave with properties such as diffraction and interference, but also like particles when it is observed as individual photons.
We don't notice this effect in everyday activities because it becomes more pronounced at the atomic and subatomic level, where the behavior of matter and light is governed by quantum mechanics. At the macroscopic level, the wave-like and particle-like properties of matter and light average out, and their behavior can be described using classical mechanics.
They occupy specific energy levels or orbitals around the nucleus, and their behavior can be described using probability distributions rather than precise trajectories.
Learn more about quantum mechanics :
https://brainly.com/question/23780112
#SPJ11
The glass envelope of the bulb is filled with nitrogen and argon gas, explain
The glass envelope of a bulb is filled with nitrogen and argon gas to prevent the filament from reacting with oxygen in the air at high temperatures.
When the bulb is turned on, the filament heats up and emits light. If the glass envelope is filled with air, the oxygen in the air will react with the hot filament and cause it to burn out quickly. This is why the bulb is filled with nitrogen and argon gas instead, which are inert gases that do not react easily with other elements.
Nitrogen and argon are also used because they are good insulators, which helps to protect the filament and maintain the temperature inside the bulb. They are also non-toxic and non-flammable, making them safe to use in a variety of lighting applications.
Suppose the source of surface water waves is stationary so that vs = 0.00 m/s. Consider a water strider moving along the surface away from the wave source at what it thinks is a very slow speed of vws = 0.10 m/s. Will the apparent wave frequency the strider measures increase, decrease, or stay the same? Explain.
Water striders can skim along the surface of water at an amazing speed of up to 150 cm/s.
The apparent wave frequency the strider measures will decrease. This is because the strider is moving away from the wave source, which means that the distance between the crests of the waves that it encounters will increase.
Since frequency is defined as the number of wave crests passing a fixed point per unit time, if the distance between the crests increases, the frequency will decrease. Therefore, even though the wave source is stationary, the apparent frequency of the waves that the strider measures will depend on its relative velocity with respect to the waves.
To learn more about Wave Frequency & Crests: https://brainly.com/question/19105816
#SPJ11
several objects roll without slipping down an incline of vertical height h, all starting from rest at the same moment The objects are a thin hoop (or a plain wedding band) and a spherical marble, In addition, a greased box slides down without friction. In what order (first to last) do they read the bottom of the incline if all of the objects have same mass?
The order in which the objects (having the same mass) reach the bottom of the incline is: 1. Greased box (sliding without friction) 2. Spherical marble (rolling without slipping) 3. Thin hoop (rolling without slipping).
To solve this problem, we need to consider the rotational inertia (also called the moment of inertia) of each object and how it affects its acceleration down the incline.
1. The greased box slides down without friction, so it doesn't experience rotational inertia. It will accelerate down the incline solely due to gravity, with an acceleration of g (=9.81 m/s²).
2. The spherical marble rolls without slipping. Its moment of inertia is (2/5)mr², where m is its mass and r is its radius. Its acceleration down the incline will be smaller than the acceleration of the greased box due to its rotational inertia.
3. The thin hoop has the largest moment of inertia of the three objects, with a moment of inertia of mr². This means it will have the slowest acceleration down the incline.
So, the order in which the objects reach the bottom of the incline is:-
1. Greased box (sliding without friction)
2. Spherical marble (rolling without slipping)
3. Thin hoop (rolling without slipping)
Learn more about inertia: https://brainly.com/question/14460640
#SPJ11
To store a total of 1 J of energy in the two identical capacitors shown, each should have a capacitance of x= 100 V 25uF O 50 uF O 100F 200uF O 10uF
Each identical capacitor should have a capacitance of 100uF to store a total of 1 Joule of energy.
We want to store a total of 1 Joule of energy in two identical capacitors and you'd like to know the capacitance of each capacitor. The terms provided are: 100V, 25uF, 50uF, 100F, 200uF, and 10uF.
To solve this problem, we'll use the energy stored in a capacitor formula:
Energy (E) = 0.5 * C * V²
Since we have two identical capacitors and the total energy is 1 Joule, the energy stored in each capacitor is 0.5 Joules.
We will now find the capacitance (C) when the energy is 0.5 Joules and the voltage (V) is 100V.
0.5 J = 0.5 * C * (100V)²
1 J = C * 10000 V²
C = 1 J / 10000 V²
C = 0.0001 F, which is equivalent to 100uF.
Learn more about a capacitor:
https://brainly.com/question/21851402
#SPJ11
Each identical capacitor should have a capacitance of 100uF to store a total of 1 Joule of energy.
We want to store a total of 1 Joule of energy in two identical capacitors and you'd like to know the capacitance of each capacitor. The terms provided are: 100V, 25uF, 50uF, 100F, 200uF, and 10uF.
To solve this problem, we'll use the energy stored in a capacitor formula:
Energy (E) = 0.5 * C * V²
Since we have two identical capacitors and the total energy is 1 Joule, the energy stored in each capacitor is 0.5 Joules.
We will now find the capacitance (C) when the energy is 0.5 Joules and the voltage (V) is 100V.
0.5 J = 0.5 * C * (100V)²
1 J = C * 10000 V²
C = 1 J / 10000 V²
C = 0.0001 F, which is equivalent to 100uF.
Learn more about a capacitor:
https://brainly.com/question/21851402
#SPJ11
A solid wheel with mass M, radius R, and rotational inertia MR2/2, rolls without sliding on a horizontal surface. A horizontal force F is applied to the axle and the center of mass has an acceleration a. The magnitudes of the applied force Fand the frictional force f of the surface, respectively, are: a. F = 3 Ma/2, 1 = Ma/2 b. F = Ma, 1 = Ma/2 c. F = 2Ma. f = Ma d. F = 2Ma, I = Ma/2 e. F = Ma, 1 = 0
The correct answer is option b. F = Ma, f = Ma/2. we need to find the magnitudes of the applied force F and the frictional force f on the solid wheel. Let's analyze the problem using the given information. The magnitudes of the applied force F and the frictional force f are F = 3Ma/2 and f = Ma/2, which corresponds to option a. F = 3Ma/2, f = Ma/2.
To understand why, we can use Newton's second law for rotational motion, which states that the net torque on an object is equal to the object's moment of inertia times its angular acceleration. In this case, since the wheel is rolling without sliding, we can use the linear acceleration a of the center of mass instead of the angular acceleration.
The net torque on the wheel is due to the applied force F and the frictional force f. Since the wheel is rolling without sliding, the frictional force is equal to the normal force N (which is also equal to the weight of the wheel) times the coefficient of static friction μ. Therefore, we have:
F - f = Ma (Newton's second law for linear motion)
(R/2)F - (R/2)f = (MR^2/2) * a (Newton's second law for rotational motion)
Solving for F and f, we get:
F = Ma
f = (R/2)F - (MR^2/4) * a = Ma/2
Therefore, the magnitudes of the applied force F and the frictional force f are F = Ma and f = Ma/2, respectively. Option b is the correct answer.
Learn more about magnitudes here:
https://brainly.com/question/14452091
#SPJ11
An object is 4 cm high and is located 19 cm in front of a thin converging lens with a focal length of 12 cm. A Calculate the position (distance from the center of the lens) of the image. B Calculate the image height (including sign).
The image height, including the sign, is -24/19 cm, indicating that the image is inverted and has a height of approximately 1.26 cm. To calculate the position and height of the image, we'll use the thin lens formula and magnification formula.
The given terms are object height (h_o) = 4 cm, object distance (d_o) = 19 cm, and focal length (f) = 12 cm.
A. Calculate the position of the image:
Step 1: Use the thin lens formula: 1/f = 1/d_o + 1/d_i, where d_i is the image distance.
Step 2: Solve for d_i: 1/d_i = 1/f - 1/d_o = 1/12 - 1/19 = (19-12)/(12*19) = 7/(12*19)
Step 3: Find d_i: d_i = 1/(7/(12*19)) = 12*19/7 = 36 cm
The image is located 36 cm from the center of the lens.
B. Calculate the image height (including sign):
Step 1: Use the magnification formula: M = -d_i/d_o = -36/19
Step 2: Calculate the image height (h_i): h_i = M * h_o = (-36/19) * 4 = -24/19 cm.
To know more about thin lens formula refer here:
https://brainly.com/question/30618134#
#SPJ11
an r404 freezer has a suction pressure of 16 psig and a suction line temperature of -15°. what is the superheat?
The superheat for the R404 freezer is 6°F.
Based on the given information, the superheat can be calculated by subtracting the suction line temperature (-15°) from the evaporator saturation temperature (which can be found using a refrigerant pressure-temperature chart for R404A at 16 psig).
Assuming a typical evaporator saturation temperature of -10°F for R404A at 16 psig, the superheat would be 5°F (evaporator saturation temperature of -10°F minus suction line temperature of -15°F).
To calculate the superheat of an R404 freezer with a suction pressure of 16 psig and a suction line temperature of -15°F, follow these steps:
1. Convert the suction pressure (16 psig) to the saturated temperature using a pressure-temperature (PT) chart for R404 refrigerant. According to the PT chart, the saturated temperature at 16 psig is approximately -21°F.
2. Subtract the saturated temperature (-21°F) from the suction line temperature (-15°F).
Superheat = Suction Line Temperature - Saturated Temperature
Superheat = (-15°F) - (-21°F)
Superheat = 6°F
The superheat for the R404 freezer is 6°F.
To know more about Suction Line Temperature click here:
brainly.com/question/28335109
#SPJ11
a non-uniform bar is situated along the x-axis between x1=-0.1 m and x2=1.0 m. its density is described by the following function: lambda=0.1x 8.0 kg/m find its center of mass location.
The non-uniform bar's centre of mass is situated at x=0.675 m.
We must ascertain the mass distribution of the bar in order to locate the centre of mass. By integrating the density function lambda over the length of the bar, we can accomplish this:
From x1 to x2, m = lambda dx
dx from -0.1 to 1.0 with m = (0.1x)(8.0)
m = 2.2 kg
Next, using the mass distribution, we must calculate the weighted average of the x-coordinate:
From x1 to x2, xcm equals x(lambda dx)/m.
xcm = (-0.1 to 1.0)(x)(0.1x)(8.0) dx / 2.2
xcm = 0.675 m
As a result, the non-uniform bar's centre of mass is situated at x=0.675 m.
learn more about mass here:
https://brainly.com/question/18064917
#SPJ11
6. how is the magnetic field of the earth affecting your experiment? be specific.
The Earth's magnetic field can impact your experiment by influencing the behavior of charged particles, affecting compass navigation, causing magnetic interference, or requiring additional controls and corrections in your experimental design.
1. Earth's magnetic field: The Earth has a magnetic field, which is mainly generated by electric currents in its outer core. This magnetic field affects many things on the planet, including compass navigation and the behavior of charged particles in the atmosphere.
2. Experiment setup: Depending on the nature of your experiment, the Earth's magnetic field could have a direct or indirect effect on the results. For example, if your experiment involves measuring the behavior of charged particles or using a compass to determine direction, the Earth's magnetic field would play a significant role in the outcome.
3. Magnetic interference: In some cases, the Earth's magnetic field can cause interference with sensitive electronic devices or instruments. This interference can lead to inaccurate measurements or unexpected results in your experiment. To minimize these effects, you may need to use magnetic shielding or perform your experiment in a location with minimal magnetic interference.
4. Correcting for the magnetic field: To account for the effect of the Earth's magnetic field on your experiment, you might need to include control tests or corrections in your experimental design. This could involve comparing results in different locations or orientations or using mathematical calculations to adjust for the magnetic field's influence on your measurements.
Learn more about magnetic field:
https://brainly.com/question/7645789
#SPJ11
The moment of inertia of a 0.98-kg bicycle wheel rotating about itscenter is 0.13kg .m2. What is the radius of this wheel,assuming the weight of the spokes can be ignored?
The radius of the wheel of 0.98 kg wheel having a moment of inertia of 0.13 kgm² is 0.364 meters.
To find the radius of the bicycle wheel, we can use the formula for the moment of inertia of a ring ignoring spokes.
I = m × r²
Where I is the moment of inertia, m is the mass of the wheel, and r is the radius of the wheel.
Rearranging this formula, we can solve for r:
[tex]r = \sqrt{(I) / (m)}[/tex]
Plugging in the given values, we get:
[tex]r = \sqrt{(0.13 \ kgm^2) / (0.98 \ kg)}[/tex]
r = 0.364 meters
Therefore, the radius of the bicycle wheel is 0.364 meters.
Learn more about the moment of inertia:
https://brainly.com/question/14119750
#SPJ11
A 20.0-μ F capacitor is connected to an ac generator with an rms voltage of 114 V and a frequency of 60.0 Hz.
Part A
What is the rms current in the circuit?
Express your answer to three significant figures and include appropriate units.
Part B
If you wish to increase the rms current. should you add a second capacitor in series or in parallel?
O Parallel
O Series
Part B: If you wish to increase the rms current, you should add a second capacitor in parallel. Adding a second capacitor in series will not increase the rms current, but it will reduce the capacitive reactance, thus increasing the phase angle of the current.
What is parallel?Parallelism is a structure of words, phrases, or sentences that contain similar elements. It is a literary device used to create balance, rhythm, and emphasis in writing. Parallelism can be achieved by using repeating words, phrases, or clauses in a sentence, by arranging words in a particular order, or by repeating the same grammatical structure.
Part A
The rms current in the circuit is calculated using Ohm's Law and is given by:
I = V / XC
where V is the rms voltage in volts, XC is the capacitive reactance in ohms, and I is the rms current in amps.
For this circuit, XC = 1 / (2πfC) = 1 / (2π*(60.0 Hz)*(20.0 μF)) = 3.91 ohms.
Therefore, the rms current is I = V / XC = 114 V / 3.91 ohms = 29.1 A.
To learn more about parallel
https://brainly.com/question/29217661
#SPJ1
A plane electromagnetic wave is traveling vertically upward with its magnetic field pointing southward.
Its electric field must be pointing
a. toward the north.b. toward the east.
c. toward the west.
d. vertically upward.
e. vertically downward
A plane electromagnetic wave is traveling vertically upward with its magnetic field pointing southward. Its electric field must be pointing b. toward the east.
To determine the direction of the electric field, we must consider the right-hand rule. The right-hand rule states that when the thumb, index finger, and middle finger of the right hand are mutually perpendicular to each other, with the thumb representing the direction of the wave's propagation, the index finger representing the electric field, and the middle finger representing the magnetic field, they follow the relationship E x B = P, where E is the electric field, B is the magnetic field, and P is the direction of the wave's propagation.
In this case, the wave's propagation is vertically upward (thumb), and the magnetic field points southward (middle finger). Following the right-hand rule, the electric field (index finger) must be pointing toward the east. Therefore, the correct answer is option b. toward the east.
Learn more about electric field at:
https://brainly.com/question/27712768
#SPJ11
A cylindrical metal specimen 15.0 mm (0.59 in.) in diameter and 150 mm (5.9 in.) long is to be subjected to a tensile stress of 50 Mpa (7250 psi); at this stress level, the resulting deformation will be totally elastic.
a) If the elongation must be less than 0.072 mm (2.83 x 10−3−3 in.), which of the metals is Table 6.1 are suitable candidates? Why?
b) If, in addition, the maximum permissible diameter decrease is 2.3 X 10−3−3 mm (9.1 x 10−5−5 in.) when the tensile stress of 50 Mpa is applied, which of the metals that satisfy the criterion in part (a) are suitable candidates? Why?
We can solve this problem by applying the principle of conservation of momentum and using vector addition to determine the final velocities of the two balls.
According to the principle of conservation of momentum, the total momentum of the system before the collision is equal to the total momentum of the system after the collision. In other words, the sum of the initial momenta of the two balls must be equal to the sum of their final momenta.
Let's assume that the positive x-axis is to the right and the positive y-axis is upwards. Then, the initial momentum of the system can be expressed as:
p_initial = m_green * v_green,i + m_red * v_red,i
where m_green and m_red are the masses of the green and red balls, respectively, and v_green,i and v_red,i are their initial velocities.
Substituting the given values, we get:
p_initial = (10 kg) * (25 m/s) + (15 kg) * (0 m/s) = 250 kg m/s
After the collision, the green ball moves at a 35 degree angle to the left of its original direction, which means its velocity has both horizontal and vertical components. We can resolve the green ball's final velocity into x- and y-components as follows:
v_green,x = v_green,f * cos(35°)
v_green,y = v_green,f * sin(35°)
where v_green,f is the magnitude of the green ball's final velocity.
Similarly, we can resolve the red ball's final velocity into x- and y-components as follows:
v_red,x = v_red,f * cos(55°)
v_red,y = v_red,f * sin(55°)
where v_red,f is the magnitude of the red ball's final velocity.
Since momentum is conserved in both the x- and y-directions, we can write two equations:
m_green * v_green,i = m_green * v_green,x + m_green * v_green,y + m_red * v_red,x + m_red * v_red,y (in the x-direction)
0 = m_green * v_green,y - m_red * v_red,y (in the y-direction)
Substituting the resolved components of the final velocities, we get:
(10 kg) * (25 m/s) = (10 kg) * v_green,f * cos(35°) + (10 kg) * v_green,f * sin(35°) + (15 kg) * v_red,f * cos(55°) + (15 kg) * v_red,f * sin(55°)
0 = (10 kg) * v_green,f * sin(35°) - (15 kg) * v_red,f * sin(55°)
Simplifying and solving for v_red,f, we get:
v_red,f = [(10 kg) * (25 m/s) - (10 kg) * v_green,f * cos(35°) - (10 kg) * v_green,f * sin(35°)] / [(15 kg) * cos(55°) + (15 kg) * sin(55°)]
Similarly, we can solve for v_green,f:
v_green,f = [(10 kg) * v_green,f * cos(35°) + (10 kg) * v_green,f * sin(35°) - (15 kg) * v_red,f * sin(55°)] / (10 kg)
Simplifying further, we get:
v_red,f = (250 - 10 v_green,f) / (15 cos(55°) + 15 sin(55°)) ≈ 8.41 m/s
v_green,f = (2/3) * (25 m/s) / (cos(35°)
Sketch the root locus of the armature-controlled de motor model in terms of the damping constant c, and evaluate the effect on the motor time constant. The characteristic equation isLqIs? + (RqI +cLa)s +cRg+KoKy = 0 Use the following parameter values:Kb = Kt = 0.1 N.m/A I = 12 x 10-5 kg.m? Ra = 2 2 La = 3 x 10-3 H
The root locus of the armature-controlled DC motor model can be sketched in terms of the damping constant c, and the effect of c on the motor time constant can be evaluated by looking at the location of the roots on the imaginary axis.
The root locus is a graphical representation of the locations of the roots of the characteristic equation as a parameter is varied. In this case, the parameter of interest is the damping constant c.
To sketch the root locus, we need to first determine the poles of the system. The characteristic equation for the armature-controlled DC motor model is:
LqIs² + (RqI +cLa)s +cRg+KoKy = 0
Using the given parameter values, we can simplify this to:
0.00012s² + (0.00024c + 0.0003)s + 0.02c + 0.01 = 0
To find the poles of this equation, we can solve for s using the quadratic formula:
s = (-b ± sqrt(b² - 4ac)) / 2a
where a = 0.00012, b = 0.00024c + 0.0003, and c = 0.02c + 0.01.
Simplifying this expression, we get:
s = (-0.00024c - 0.0003 ± sqrt((0.00024c + 0.0003)² - 4(0.00012)(0.02c + 0.01))) / 0.00024
Now, we can plot the roots of this equation as a function of c. This is the root locus. As c varies, the roots will move along the locus.
The effect of c on the motor time constant can be evaluated by looking at the location of the roots on the imaginary axis. The time constant is proportional to the reciprocal of the imaginary part of the root. As c increases, the roots move closer to the real axis, indicating a shorter time constant. This means that the motor response will be faster and more responsive to changes in the input.
learn more about armature-controlled here: brainly.com/question/1382241
#SPJ11
estimate your de broglie wavelength while walking at a speed of 1 m/sm/s . assume that your mass is, say, m=80kgm=80kg .
Your de Broglie wavelength while walking at 1 m/s with a mass of 80 kg is approximately 8.2825 x 10^--37 meters. This is an incredibly small wavelength, which is typical for macroscopic objects like humans
To estimate your de Broglie wavelength while walking at a speed of 1 m/s, we can use the de Broglie wavelength formula:
λ = h / p
where λ is the de Broglie wavelength, h is Planck's constant, and p is the momentum of the object.
The momentum of an object can be calculated as:
p = m * v
where m is the mass of the object and v is its velocity.
Plugging in the given values, we get:
p = 80 kg * 1 m/s = 80 kg m/s
Using Planck's constant h = 6.626 x 10^-34 m^2 kg/s, we can now calculate the de Broglie wavelength:
λ = h / p = 6.626 x 10^-34 m^2 kg/s / 80 kg m/s ≈ 8.3 x 10^-37 meters
However, it's important to note that the de Broglie wavelength is only significant for objects with very small masses or very high velocities, such as electrons or other subatomic particles.
Learn more about wavelength here:
https://brainly.com/question/12924624
#SPJ11
a heavy rope, 19 ft long, weighs 1.1 lb/ft and hangs over the edge of a building that is 21 ft high. how much work is done in pulling the rope to the top of the building?
Approximately 219.45 ft-lb of work is done in pulling the 19 ft heavy rope to the top of the 21 ft high building.
The work done (W) can be calculated using the formula W = F × d, where F is the force required to pull the rope, and d is the distance over which the force is applied. In this case, the distance is equal to the height of the building, 21 ft.
First, let's determine the total weight of the rope. The rope weighs 1.1 lb/ft and is 19 ft long, so its total weight is 1.1 lb/ft × 19 ft = 20.9 lb.
Since the rope is hanging over the edge of the building, the force required to pull it up changes as more of the rope is lifted. To find the average force, we'll divide the total weight of the rope by 2: (20.9 lb) / 2 = 10.45 lb.
Now, we can calculate the work done:
W = F × d
W = 10.45 lb × 21 ft
W ≈ 219.45 ft-lb
Therefore, approximately 219.45 ft-lb of work is done in pulling the 19 ft heavy rope to the top of the 21 ft high building.
For more questions on work - https://brainly.com/question/25573309
#SPJ11
Approximately 219.45 ft-lb of work is done in pulling the 19 ft heavy rope to the top of the 21 ft high building.
The work done (W) can be calculated using the formula W = F × d, where F is the force required to pull the rope, and d is the distance over which the force is applied. In this case, the distance is equal to the height of the building, 21 ft.
First, let's determine the total weight of the rope. The rope weighs 1.1 lb/ft and is 19 ft long, so its total weight is 1.1 lb/ft × 19 ft = 20.9 lb.
Since the rope is hanging over the edge of the building, the force required to pull it up changes as more of the rope is lifted. To find the average force, we'll divide the total weight of the rope by 2: (20.9 lb) / 2 = 10.45 lb.
Now, we can calculate the work done:
W = F × d
W = 10.45 lb × 21 ft
W ≈ 219.45 ft-lb
Therefore, approximately 219.45 ft-lb of work is done in pulling the 19 ft heavy rope to the top of the 21 ft high building.
For more questions on work - https://brainly.com/question/25573309
#SPJ11
An object is rolling, so its motion involves both rotation and translation. Which of the following statements must be true concerning this situation? a. The rotational kinetic energy must be constant as the object rolls. b. The translational kinetic energy may be 0 joules. c. The total mechanical energy is equal to the sum of the translational and rotational kinetic energies and the gravitational potential energy of the object. d. The gravitational potential energy must be changing as the object rolls.
The correct statement concerning this situation is c. The total mechanical energy is equal to the sum of the translational and rotational kinetic energies and the gravitational potential energy of the object. This is because the object has both rotational and translational motion, which means it has both rotational and translational kinetic energies. Additionally, the object is subject to gravity, which means it has gravitational potential energy.
Therefore, the total mechanical energy of the object is equal to the sum of these energies. The other statements are not necessarily true: a) the rotational kinetic energy can change as the object rolls, b) the translational kinetic energy may not be zero depending on the speed of the object, and d) the gravitational potential energy may not be changing as the object rolls depending on the height of the object above the ground.
To learn more about Total Mechanical Energy : https://brainly.com/question/15277710
#SPJ11
The blocks start at height h = 1.4 m. The second ramp is inclined at an angle of θ2=50∘ .
The coefficient of kinetic friction is 0.61. What is the speed when the block reaches the bottom of the second ramp?
a. v2=4.09m/s
b. v2=5.24m/s
c. v2=3.66m/s
d. v2=2.59m/s
e. v2=2.89m/s
To find the speed when the block reaches the bottom of the second ramp, we can use the conservation of energy principle and consider the work done by friction.
Initial potential energy at height h (PE1) = mgh, where m is the mass of the block, g is the gravitational acceleration (9.81 m/s²), and h = 1.4 m.
When the block reaches the bottom of the second ramp, its potential energy becomes 0, and it has kinetic energy (KE2). We can write the conservation of energy equation as:
PE1 - Work done by friction = KE2
mgh - μmgd = (1/2)mv²
Where μ is the coefficient of kinetic friction (0.61), d is the distance traveled along the second ramp, and v is the speed when the block reaches the bottom of the second ramp.
To find d, we can use the height and angle θ2:
d = h / sinθ2 = 1.4 / sin(50°) ≈ 1.812 m
Now, we can plug in the values and solve for v:
(1.4)(9.81) - (0.61)(9.81)(1.812) = (1/2)(v²)
Solving for v, we get:
v ≈ 2.89 m/s
So, the correct answer is:
e. v2 = 2.89 m/s
https://brainly.com/question/31485815
#SPJ11
1. A 2 kg trolley is at rest on a horizontal frictionless surface. A constant horizontal force of 8 N is applied to the trolley over a distance of 3 m. B h 1.2 7m A 3m 8 N When the force is removed at point A, the trolley moves a distance of 7 m up the incline until it reaches the maximum height at point A. While the trolley moves up the incline, there is a constant frictional force of 1,5 N acting on it. 1.1 Write down the name of a non-conservative force acting on the trolley as it moves up the incline. Draw a labelled free-body diagram showing all the forces acting on the trolley as it moves along the horizontal surface. 1.3 State the work-energy theorem in words. 1.4 Use the work-energy theorem to calculate the speed of the trolley when it reaches point A. (1) (3) (2) (4)
1.1: The non-conservative force acting on the trolley as it moves up the incline is the force of friction.
1.4: When the trolley arrives at point A, its speed is roughly 2.32 m/s.
How to use the work-energy theorem for speed?1.2:
Free-body diagram of the trolley on the horizontal surface:
F applied
↓
┌─────────────┐
│ trolley │
│ │
│ │
└─────────────┘
Free-body diagram of the trolley on the incline:
F applied
↓
┌───────┐
│ │
│ │
F friction │
│ │
│ trolley │
│ │
└───────┘
1.3: The work-energy theorem states that the work done on an object is equal to the change in its kinetic energy.
1.4:
The work done on the trolley by the applied force is:
W = Fd = (8 N)(3 m) = 24 J
The work done by friction is:
W friction = F friction d = (1.5 N)(7 m) = 10.5 J
The net work done on the trolley is:
ΔW = W - W friction = 24 J - 10.5 J = 13.5 J
According to the work-energy theorem, this work is equal to the change in kinetic energy:
ΔK = (1/2)mv²f - (1/2)mv²i
Since the trolley starts from rest, the initial kinetic energy is zero:
ΔK = (1/2)mv²f
Solving for v:
v = √(2ΔK/m) = √(2(13.5 J)/(2 kg)) ≈ 2.32 m/s
Therefore, the speed of the trolley when it reaches point A is approximately 2.32 m/s.
Find out more on work-energy theorem here: https://brainly.com/question/22236101
#SPJ1
an object of mass m moves along the x-axis according to the equation x(t)= acos2t. what is an equation for its kinetic energy in terms of t
When an object of mass m moves along the x-axis according to the equation x(t)= acos2t, the equation of the kinetic energy in terms of t is K(t) = 2ma² sin²(2t).
To find the kinetic energy of the object in terms of time t, we need to first find the velocity of the object, and then use it to calculate the kinetic energy.
The velocity of the object is the derivative of its position with respect to time:
v(t) = x'(t) = -2asin(2t)
where a is the amplitude of the oscillation.
The kinetic energy of the object is given by the equation:
K = (1/2)mv²
where m is the mass of the object and v is its velocity.
Substituting the expression for v(t) into the equation for kinetic energy, we get:
K(t) = (1/2)m(-2asin(2t))²
Simplifying this expression, we get:
K(t) = 2ma² sin²(2t)
So, the equation for the kinetic energy of the object in terms of t is K(t) = 2ma² sin²(2t).
Learn more about kinetic energy:
https://brainly.com/question/8101588
#SPJ11
A 22 k? and 1 2 k? resistor are connected across a 68 V source. How is the voltage divided? O 34 V and 34 V O 68 V and 68 V O 44 V and 24 V
The voltage is divided into 34 V across the 22 kΩ resistor and 24 V across the 12 kΩ resistor.
hence the option is O 34 V and 24 V.
To determine how the voltage is divided across the resistors, we can use the voltage divider formula:
V1 = (R1 / (R1 + R2)) × Vtotal
V2 = (R2 / (R1 + R2)) × Vtotal
where V1 and V2 are the voltages across each resistor, R1 and R2 are the resistance values of the resistors, and Vtotal is the total voltage applied across the resistors.
Plugging in the values given in the problem, we get:
V1 = (22 kΩ / (22 kΩ + 12 kΩ)) × 68 V = 34 V
V2 = (12 kΩ / (22 kΩ + 12 kΩ)) × 68 V = 24 V
The voltage divider formula is a useful tool in electronics for determining how a voltage is distributed between two or more resistors in a circuit. In general, the voltage divider formula states that the voltage across a resistor is proportional to the ratio of its resistance to the total resistance in the circuit.
learn more about Voltage here:
https://brainly.com/question/13521443
#SPJ11
The diameter of Mars is 6794 km, and its minimum distance from the earth is 5.58 x 10^7 km. When Mars is at this distance, find the diameter of the image of Mars formed by a spherical, concave, telescope mirror with a focal length of 1.55m. Find y'.
The diameter of the image of Mars formed by the telescope mirror when mars is at a distance of 5.58 x 10^7 km, is 1.884 x 10^-4 m.
To find the diameter of the image of Mars formed by the telescope mirror, we can use the formula:
y' = (f / u) * D
where y' is the size of the image, f is the focal length of the mirror, u is the distance between the mirror and the object (in this case, Mars), and D is the diameter of the mirror.
We know that the diameter of Mars is 6794 km and its minimum distance from Earth is 5.58 x 10^7 km. To convert these values to meters, we need to multiply by 1000:
D_Mars = 6794000 m
u = 5.58 x 10^10 m
We also know that the focal length of the telescope mirror is 1.55 m. Substituting these values into the formula, we get:
y' = (1.55 / 5.58 x 10^10) * 6794000
y' = 1.884 x 10^-4 m
Therefore, the diameter of the image of Mars is 1.884 x 10^-4 m.
To learn more about "telescope", visi: https://brainly.com/question/18300677
#SPJ11
calculate brewster’s angle in degrees for glass with an index of refraction of n = 1.5.
The Brewster's angle in degrees for a glass having a refractive index of 1.5 is 56.31°.
Brewster's angle is the angle of incidence at which light, that is polarized parallel to the plane of incidence, is completely reflected from a surface with no reflection of light that is polarized perpendicular to the plane of incidence.
To calculate Brewster's angle, you can use the formula:
Brewster's angle = tan⁻¹(n)
Where n is the index of refraction of the material.
So for glass with an index of refraction of n = 1.5:
Brewster's angle = tan⁻¹(1.5)
Brewster's angle = 56.31 degrees (rounded to two decimal places)
Therefore, the Brewster's angle in degrees for glass with an index of refraction of n = 1.5 is approximately 56.31 degrees.
Learn more about index of refraction:
https://brainly.com/question/12469161
#SPJ11
A 30.0 cm x 60.0 cm rectangular circuit containing a 15.0Ω resistor is perpendicular to a uniform magnetic field that starts out at 2.70T and steadily decreases at 0.200T/s . (See the figure .)
a)While this field is changing, what does the ammeter read?
=____________________mA
The ammeter will read 2.4 mA while the magnetic field is changing.
we'll first find the electromotive force (EMF) induced in the rectangular circuit, and then use Ohm's Law to find the current in the circuit.
1. Calculate the area of the rectangular circuit: A = length × width = 30.0 cm × 60.0 cm = 0.3 m × 0.6 m = 0.18 m².
2. Determine the rate of change of the magnetic field: ΔB/Δt = -0.200 T/s (since the field is decreasing).
3. Apply Faraday's Law to find the induced EMF: EMF = -N * (ΔΦ/Δt) = -1 * (A * ΔB/Δt) (since there is only one loop in the circuit, N = 1).
4. Calculate the EMF: EMF = -(0.18 m² * -0.200 T/s) = 0.036 V.
5. Use Ohm's Law to find the current: I = EMF / R, where R is the resistor value.
6. Calculate the current: I = 0.036 V / 15.0 Ω = 0.0024 A.
7. Convert the current to milliamperes: I = 0.0024 A * 1000 mA/A = 2.4 mA.
The ammeter will read 2.4 mA while the magnetic field is changing.
learn more about magnetic here
https://brainly.com/question/23096032
#SPJ11
Complete the PoundDog code by adding a constructor having a constructor initializer list that initializes age with 1, id with -1, and name with "NoName". Notice that MyString's default constructor does not get called. Note: If you instead create a traditional default constructor as below, MyString's default constructor will be called, which prints output and thus causes this activity's test to fail. Try it! // A wrong solution to this activity... PoundDog::PoundDog() { age = 1; id = -1; name.SetString("NoName"); }
To complete the PoundDog code with a constructor initializer list, you should write the constructor like this:```cpp, PoundDog :: PoundDog() : age(1), id(-1), name("NoName") {}```
This constructor initializes age with 1, id with -1, and name with "NoName" without calling MyString's default constructor, as required.
To complete the PoundDog code by adding a constructor with a constructor initializer list that initializes age with 1, id with -1, and name with "NoName", you can modify the PoundDog class as follows:
class PoundDog {
private:
int age;
int id;
MyString name;
public:
PoundDog() : age(1), id(-1), name("NoName") {
// constructor initializer list that initializes age with 1, id with -1, and name with "NoName"
}
// other member functions...
};
This constructor initializes the age, id, and name member variables using a constructor initializer list. It sets the age to 1, id to -1, and name to "NoName" using the MyString constructor that takes a const char* argument. Note that this constructor does not call the default constructor of MyString, as requested in the question.
It's important to note that if you were to create a traditional default constructor as follows:
PoundDog::PoundDog() {
age = 1;
id = -1;
name.SetString("NoName");
}
Then the default constructor of MyString would be called, which prints output and would cause the test for this activity to fail.
To learn more about variables click here
brainly.com/question/21442369
#SPJ11
a. Consider a capacitor being charged by a battery in a simple RC circuit. After a switch is thrown to charge the capacitor, when is the battery delivering the most power? It is when immediately after the switch is thrown. Not when the capacitor is fully charged or half charged. Why? Please explain in detail. b. After a switch is thrown to charge the capacitor, the capacitance is constant regardless of if it is fully or half charged or if it is immediately when the switch is thrown. Why? Please explain in detail. After a switch is thrown to charge the capacitor, when is the electric field greatest in the capacitor gap? Once the capacitor is fully charged. Why?
a. In a simple RC circuit, the battery is delivering the most power immediately after the switch is thrown to charge the capacitor. This is because at that moment, the capacitor is completely discharged and acts as a short circuit. This means that the full voltage of the battery is applied across the resistor, causing the largest possible current to flow through it. As the capacitor charges up, its voltage gradually increases, which decreases the voltage across the resistor and hence the current flowing through it. Therefore, the power delivered by the battery decreases as the capacitor charges up.
b. The capacitance of a capacitor is determined by the geometry of its electrodes and the type of dielectric material between them. It is independent of the charge or voltage on the capacitor. Therefore, the capacitance remains constant regardless of whether the capacitor is fully charged, half charged, or just starting to charge. This means that the amount of charge that flows onto the capacitor per unit voltage is also constant, which is why the voltage across the capacitor increases linearly as it charges up.
After a switch is thrown to charge the capacitor, the electric field is greatest in the capacitor gap when the capacitor is fully charged. This is because when the capacitor is fully charged, the voltage across its electrodes is at its maximum value. Since the electric field is proportional to the voltage gradient in the capacitor gap, it is also at its maximum value when the capacitor is fully charged. As the capacitor discharges, the voltage across its electrodes decreases, which in turn decreases the electric field in the capacitor gap.
a. In a simple RC circuit, the battery delivers the most power immediately after the switch is thrown because at that instant, the voltage across the resistor is at its maximum and the capacitor is uncharged. As the capacitor charges, the voltage across the resistor decreases, leading to a reduction in the power delivered by the battery. When the capacitor is fully charged, the voltage across the resistor becomes zero and the battery no longer delivers power.
b. The capacitance of a capacitor is constant because it depends on the geometry of the capacitor (surface area of the plates and distance between them) and the dielectric material used between the plates. These factors remain unchanged during the charging process, hence the capacitance remains constant regardless of the charge state.
The electric field in the capacitor gap is greatest when the capacitor is fully charged because the electric field is directly proportional to the charge stored on the plates. As the capacitor charges, the charge on the plates increases, leading to an increase in the electric field. Once the capacitor is fully charged, the electric field reaches its maximum value.
Learn more about RC circuit here;
https://brainly.com/question/31394676
#SPJ11
a truck runs into a pile of sand, moving 0.95 m as it slows to a stop. the magnitude of the work that the sand does on the truck is 5.5×105j. did the sand do positive or negative work?
The sand does negative work on the truck
A truck that runs into a pile of sand and moves 0.95 meters as it slows to a stop. The magnitude of the work that the sand does on the truck is 5.5×10^5 Joules. To determine if the sand did positive or negative work, we need to consider the direction of the force applied by the sand and the direction of the displacement.
In this scenario, the force applied by the sand is opposite to the direction of the truck's movement because it is slowing the truck down. Since the force and displacement are in opposite directions, the sand does negative work on the truck.
Learn more about : Work & Motion - https://brainly.com/question/31488790
#SPJ11