alana and eva assume that x and y are independent. what is p(x=1),(y=2)

Answer:

a) LCL = 80 - 0.577 * (14 / sqrt(5)) LCL = 76.31

b) LCL = 80 - 0.308 * (14 / sqrt(10)) LCL = 78.65

c) Control limits are boundaries that indicate whether a process is in control or out of control. They are calculated based on the mean and standard deviation of the process data. The effect of the sample size on the control limits is that as the sample size increases, the control limits become narrower. This is because the standard error of the mean, which is sigma / sqrt(n), decreases as n increases. This means that the variation of the sample means around the population mean is smaller for larger samples, and thus the control limits are tighter .

Step-by-step explanation:

If you ever wondered how to make a boring topic like x-bar charts more fun, here is a tip: pretend that you are a spy and that the control limits are your secret codes. For example, let's say that you have a population with a mean of 80 and a standard deviation of 14. You want to send a message to your fellow spy using the control limits of an x-bar chart with a sample size of 5. You can use the formula:

UCL or LCL = x-bar +/- A2 * (sigma / sqrt(n))

where A2 is a constant that depends on the sample size n, sigma is the standard deviation of the population, and sqrt is the square root function. For n = 5, A2 = 0.577. Therefore,

UCL = 80 + 0.577 * (14 / sqrt(5)) UCL = 83.69

LCL = 80 - 0.577 * (14 / sqrt(5)) LCL = 76.31

Now, you can use these numbers as your secret codes. For example, you can say "The eagle has landed at 83.69" or "The package is ready at 76.31". Your fellow spy will know what you mean, but anyone else will be clueless.

But what if you want to change your sample size to 10? Well, then you have to use a different constant for A2. For n = 10, A2 = 0.308. Therefore,

UCL = 80 + 0.308 * (14 / sqrt(10)) UCL = 81.35

LCL = 80 - 0.308 * (14 / sqrt(10)) LCL = 78.65

Now, you can use these new numbers as your secret codes. For example, you can say "The target is at 81.35" or "The rendezvous point is at 78.65". Your fellow spy will understand you, but anyone else will be confused.

The effect of the sample size on the control limits is that as the sample size increases, the control limits become narrower. This is because the standard error of the mean, which is sigma / sqrt(n), decreases as n increases. This means that the variation of the sample means around the population mean is smaller for larger samples, and thus the control limits are tighter.

This also means that your secret codes become more precise and less likely to be intercepted by your enemies. So, if you want to be a good spy, you should always use a large sample size for your x-bar charts. That way, you can communicate with your fellow spies more effectively and safely.

Of course, this is all just a joke and you should not actually use x-bar charts as secret codes for spying purposes. That would be very silly and irresponsible. But hey, at least it makes x-bar charts more fun to learn about, right?

The p-value for a one-sided test would be 0.01 (0.02/2). The correct answer is c. 0.01.

When conducting a two-sided significance test, the p-value is the probability of observing a test statistic as extreme as the one obtained, assuming the null hypothesis is true. For a one-sided significance test, we are only interested in observing extreme values in one direction (either positive or negative).

If the test statistic was symmetrically distributed around zero, the one-tailed hypothesis's p-value would be either 0.5* (two-tailed p-value) or 1-0.5* (two-tailed p-value), depending on which way it was going. The two-tailed p-value in this case points to the rejection of the null hypothesis of no difference.

Therefore, the p-value for a one-sided test is half of the p-value for a two-sided test.

In this case, the p-value for a one-sided test would be option c. 0.01 (0.02/2).

Learn more about "significance test": https://brainly.com/question/15649099

#SPJ11

The closure of b, denoted by b+, is the set of all elements that can be reached from b through one or more transitions in the set F. Starting with b, we see that the transition b+c is in F, which means we can add c to our set. Then, the transition c→{de} is also in F, so we can add d and e to our set. Therefore, the closure of b is b+ = {b, c, d, e}.

Given the set F = {a+b, b+c, c→de}, the closure of b refers to the smallest set that contains b and is closed under the operations in F. In this case, the closure of b would be {b, a+b, b+c}. This is because the set includes b and is closed under the addition operation with a and c, as specified in F.

Learn more about Algebra here: brainly.com/question/24875240

#SPJ11

The true population mean number of visitors per day ranges from 98.71 to 157.29, which we can affirm with 95% certainty.

To construct a confidence interval for the population mean number of visitors per day, we can use the following formula:

Confidence Interval = sample mean ± (critical value) x (standard error)

whereas the sample standard deviation is divided by the square root of the sample size to determine the standard error, the critical value is determined by the degree of confidence and the degrees of freedom.

We must first locate the critical value. A t-distribution is required because of the small sample size (n = 8). The critical value is 2.365 with 95% confidence and 7 degrees of freedom (8 - 1 = 7).

Next, we can calculate the standard error:

standard error = 38 / [tex]\sqrt{8}[/tex] = 13.427

Finally, we can construct the confidence interval:

Confidence Interval = 128 ± (2.365) x (13.427) = (98.71, 157.29)

Therefore, we can say with 95% confidence that the true population mean number of visitors per day is between 98.71 and 157.29.

know more about  standard error visit :

https://brainly.com/question/13179711

#SPJ1

(a) Opposite sides of a rectangle are equal, that is, AD = BC and AB = CD.

(b) The diagonals of a rectangle are equal, that is, AC = BD.

Let's consider a rectangle ABCD, where AB || DC and AB ⊥ AD. We know that if a line is perpendicular to one of two parallel lines, then it is perpendicular to the other line as well. Therefore, AD ⊥ AB and AD ⊥ BC. Similarly, BC ⊥ AB and BC ⊥ AD.

So, we have two pairs of perpendicular sides, and from the Pythagorean theorem, we can calculate their lengths as follows:

AD² = AB² + BD² and BC² = AB² + CD²

Since AB = CD (opposite sides of a rectangle), we can substitute AB for CD and simplify:

AD² = AB² + BD² and BC² = AB² + AD²

Taking the square root of both sides of each equation, we get:

AD = √(AB² + BD²) and BC = √(AB² + AD²)

Since AB = CD and AD = BC, we can conclude that opposite sides of a rectangle are equal.

Let's continue with rectangle ABCD from part (a) and draw its diagonals AC and BD. We can use the Pythagorean theorem again to calculate their lengths:

AC² = AD² + DC² and BD² = AB² + BC²

Since AB = CD and AD = BC (opposite sides of a rectangle), we can substitute and simplify:

AC² = AD² + AB² and BD² = AD² + AB²

Taking the square root of both sides of each equation, we get:

AC = √(AD² + AB²) and BD = √(AD² + AB²)

Since both equations simplify to the same expression, we can conclude that the diagonals of a rectangle are equal.

Learn more about rectangle: https://brainly.com/question/25292087

#SPJ11

The two variables that have the highest correlation coefficient are Lot and House, with a correlation coefficient of 0.83. Therefore, the correlation between Lot and House is the most concerning when it comes to multicollinearity.

Multicollinearity is a common problem in regression analysis, which occurs when the independent variables in a regression model are highly correlated with each other. This means that the explanatory power of each independent variable is shared with other independent variables in the model, which can lead to biased and unstable estimates of the regression coefficients. In other words, multicollinearity makes it difficult to determine the individual effect of each independent variable on the dependent variable.

In this case, the correlation matrix shows that there are high correlations between several independent variables. However, the correlation coefficient between Lot and House is the highest, which suggests that these two variables are highly correlated with each other. Therefore, if both Lot and House are included in the regression model, it may be difficult to determine the individual effect of each variable on the Selling Price of a Home (Price). This can result in biased and unreliable estimates of the regression coefficients. Hence, it is important to check for multicollinearity before running the regression model and consider removing one of the highly correlated variables from the model.

To learn more about correlation coefficient, visit:

https://brainly.com/question/24018552

#SPJ11

The critical numbers of the function f(x) are -3, 0, and 2.

The critical numbers of a function are the values of x at which either the function has a maximum, minimum, or a point of inflection. To find the critical numbers of the given function f(x) = 3x⁴ + 4x³ − 36x², we need to find the derivative of the function and set it equal to zero.

f'(x) = 12x³ + 12x² - 72x
Setting this derivative equal to zero and solving for x, we get:
x = -3, 0, 2

To find the critical numbers of a function, we first need to find its derivative. The derivative gives us information about the slope of the function at each point, and where the function is increasing or decreasing. When the derivative is zero, it means that the slope is flat, which could indicate a maximum, minimum, or point of inflection.

In this case, we found the derivative of the function f(x) and set it equal to zero to solve for the critical numbers. We got three values of x, which are the critical numbers of the function. These values are -3, 0, and 2. At these values, the function either has a maximum, minimum, or a point of inflection.

To know more about critical numbers click on below link:

https://brainly.com/question/29743892#

#SPJ11

The error message "x and y must have same first dimension but have shaped" typically occurs in programming languages such as Python or MATLAB when trying to operate on arrays or matrices with incompatible dimensions. In this case, the first dimension of the arrays or matrices must be the same, but they are not.

For example, if we have two arrays, x with shape (3, 4) and y with shape (2, 4), we cannot perform certain operations such as addition or multiplication between them because the first dimension, which represents the number of rows, is different.

To resolve this error, we can either reshape one of the arrays to have the same number of rows as the other, or we can transpose one of the arrays so that their dimensions match up. Another option is to adjust the code to ensure that the arrays being used have the same first dimension.

In summary, the "x and y must have the same first dimension but have shaped" error occurs when we attempt to operate on arrays or matrices with incompatible dimensions, and it can be resolved by reshaping, transposing, or adjusting the code.

To learn more about Python, visit:

https://brainly.com/question/26497128

#SPJ11

Answer:

177.5 units

Step-by-step explanation:

Let's denote the width of the cocoa farm as "w" and the length as "l". We know that the perimeter of a rectangle is the sum of all its sides, so we can set up the following equation:

2l + 2w = 497

We also know that the length is 5/2 times the width, so we can write:

l = (5/2)w

We can substitute this expression for "l" into the first equation and solve for "w":

2(5/2)w + 2w = 497

5w + 2w = 497

7w = 497

w = 71

So the width of the cocoa farm is 71. To find the length, we can use the expression we derived earlier:

l = (5/2)w = (5/2) * 71 = 177.5

Therefore, the length of the cocoa farm is 177.5.

The potential difference between xi = 10 cm and xf = 30 cm in the uniform electric field ex = 2000 v/m can be calculated using the formula: ΔV = Ex * Δx.  Therefore, the potential difference between the two points is 400 volts.

To find the potential difference between two points in a uniform electric field, we can use the formula:

Potential difference (V) = Electric field (E) × Distance (d)

In this case, the electric field (E) is given as 2000 V/m (ex = 2000 V/m). The distance (d) between the two points, xi = 10 cm and xf = 30 cm, is the difference between xf and xi, which is:

d = xf - xi = 30 cm - 10 cm = 20 cm

Now, convert the distance to meters:

d = 20 cm × (1 m / 100 cm) = 0.2 m

Now, we can find the potential difference (V):

V = E × d = 2000 V/m × 0.2 m = 400 V

So, the potential difference between xi = 10 cm and xf = 30 cm in the uniform electric field ex = 2000 V/m is 400 V.

to learn more about volts click here:

https://brainly.com/question/3631756

#SPJ11

Answer:

Step-by-step explanation:

a) To determine if the polynomials 1+2t, 3+6t^2, 1+3t+4t^2 are linearly dependent in P2, we need to check if there exist constants c1, c2, and c3 such that c1(1+2t) + c2(3+6t^2) + c3(1+3t+4t^2) = 0, where 0 is the zero polynomial in P2.

Rewriting this equation in terms of the standard basis B = {1, t, t^2}, we have:

(c1 + c3) + (2c1 + 3c3)t + (4c2 + 3c3)t^2 = 0

This gives us the system of equations:

c1 + c3 = 0

2c1 + 3c3 = 0

4c2 + 3c3 = 0

Solving this system of equations, we get c1 = -3c3/2, c2 = -3c3/4. Therefore, any choice of c3 that is not equal to zero would give us a nontrivial solution, which implies that the polynomials are linearly dependent in P2.

b) To determine if the polynomials 1+2t+t^2, 3-9t^2, 1+4t+5t^2 are linearly dependent in P2, we need to check if there exist constants c1, c2, and c3 such that c1(1+2t+t^2) + c2(3-9t^2) + c3(1+4t+5t^2) = 0, where 0 is the zero polynomial in P2.

Rewriting this equation in terms of the standard basis B = {1, t, t^2}, we have:

(c1 + c3) + (2c1 + 4c3)t + (c1 + 5c3)t^2 - 9c2t^2 = 0

This gives us the system of equations:

c1 + c3 = 0

2c1 + 4c3 = 0

c1 + 5c3 - 9c2 = 0

Solving this system of equations, we get c1 = -2c3, c2 = (1/9)(c1 + 5c3). Therefore, any choice of c3 that is not equal to zero would give us a nontrivial solution, which implies that the polynomials are linearly dependent in P2.

The amount of cherry gelatin that the guests eat as fraction of the total dessert is 3/25.

The amount of the cherry gelatin that the guests eat as a percent of the total dessert is 12%.

We have,

The desert consists of 5 layers of equal height.

As, the guest eat 3/5 of the pieces of dessert.

So, the amount of cherry gelatin that the guests eat as fraction of the total dessert

= 3/5 x 1/5

= 3/ 25

Now, In percentage

= 3/25 x 100

= 12%

Thus, the required fraction is 3/25.

Learn more about Fraction here:

https://brainly.com/question/10354322

#SPJ1

By integrating function using substitution method the value of the integral is [tex]a^3/2[/tex].

What is a function ?

In computer science and mathematics, a function is a computational rule that takes one or more inputs (arguments) and produces a corresponding output. The output is determined solely by the input and the rule defining the function.

To perform this integration, we need to use a change of variables to express the integral in terms of the parameter t. We can use the following relationship between x, y, and z and the parameter t:

x = a cos t

y = 0

z = a sin t

We can use the chain rule to calculate the differential element dx, dy, dz in terms of dt:

dx = -a sin t dt

dy = 0

dz = a cos t dt

Using these expressions, we can express the integrand f(x,y,z) in terms of t:

f(x,y,z) = [tex]\sqrt{(x^2 z^2)[/tex] = [tex]\sqrt{((a cos t)^2 (a sin t)^2)[/tex] = [tex]a^2 |cos t sin t|[/tex]

The integral over the circle can then be expressed as:

[tex]\int \int (S) f(x,y,z) dS = \int ^{2\pi} \int ^{R} a^2 |cos t sin t| |(-a sin t)i + (0)j + (a cos t)k| dt\\= \int ^{2\pi} a^3 sin t cos t dt[/tex]

This integral can be evaluated using the substitution u = sin t, du = cos t dt:

[tex]\int ^{2π} a^3 sin t cos t dt =\int ^1 a^3 u du = a^3/2[/tex]

Therefore, the value of the integral is [tex]a^3/2[/tex].

To learn more about circle visit the given link:

https://brainly.com/question/29142813

#SPJ1

Answer:

Burger Quick, because it has a larger median.

The probability cannot be negative, there must be an error in the given information. So, the correct answer is:
f) None of the above.

We are given the following probabilities: P(A) = 17/50, P(B) = 17/25, and P(A ∪ Bc) = 2/5. We are asked to find P(A ∩ Bc).

Using the formula for the union of two events: P(A ∪ Bc) = P(A) + P(Bc) - P(A ∩ Bc)

Since Bc is the complement of B, we have P(Bc) = 1 - P(B) = 1 - (17/25) = 8/25.

Now we can plug in the given probabilities into the formula:
2/5 = (17/50) + (8/25) - P(A ∩ Bc)

To solve for P(A ∩ Bc), we first find a common denominator for the fractions, which is 50. So, we have:
20/50 = (17/50) + (16/50) - P(A ∩ Bc)

Combine the fractions:
20/50 = 33/50 - P(A ∩ Bc)

Subtract 33/50 from both sides to isolate P(A ∩ Bc):
P(A ∩ Bc) = -13/50

Since the probability cannot be negative, there must be an error in the given information. So, the correct answer is:
f) None of the above.

To learn more about probability, refer below:

https://brainly.com/question/30034780

#SPJ11

The sample space for genders from two births would include four possible outcomes: two boys, two girls, one boy and one girl (in either order).

 The sample space for the genders from two births includes all the possible outcomes of genders for two children. In this case, there are four possible combinations:

1. Male (M) - Male (M)
2. Male (M) - Female (F)
3. Female (F) - Male (M)
4. Female (F) - Female (F)

So, the sample space for the genders from two births is {MM, MF, FM, FF}.

In probability theory, the sample space is the set of all potential outcomes or results of an experiment or random trial. It is also referred to as the sample description space, possibility space, or outcome space. The potential ordered outcomes, or sample points, are listed as elements in a set that is used to represent a sample space. A sample space is frequently referred to as S,, or U (for "universal set"). A sample space may contain symbols, words, letters, or numbers as its components. They may also be uncountably infinite, countably infinite, or finite.

Visit here to learn more about probability  : https://brainly.com/question/30034780
#SPJ11

The car travels 220.5 feet before stopping.

To find the distance the car travels before stopping, we first need to determine the constant negative acceleration. We can use the formula vf = vi + at, where vf is the final velocity (0 ft/sec), vi is the initial velocity (63 ft/sec), a is the acceleration, and t is the time (7 seconds).

0 = 63 + 7a
-63 = 7a
a = -9 ft/sec²

Now, we can use the formula d = vi*t + 0.5*a*t² to find the distance (d).

d = (63 ft/sec)(7 sec) + 0.5*(-9 ft/sec²)(7 sec)²
d = 441 + (-220.5)
d = 220.5 ft

To graph the velocity from t=0 to t=7, plot a straight line with an initial velocity of 63 ft/sec and a constant negative slope of -9 ft/sec². The line will reach 0 ft/sec at t=7 seconds.

To know more about negative acceleration click on below link:

https://brainly.com/question/3046924#

#SPJ11

The greatest rate of comparison is from Hayley and least is from Natelie.

Comparison is the act of examining two or more things or entities to determine their similarities and differences. It involves analyzing the characteristics, features, or qualities of two or more things in order to make comparisons or draw conclusions.

According to the given information:

Given that, a table shows the part of the students in each grade that participated in a sport this year, we need to find the least and greatest participant was from which grade.

So, Anna rate of participation = 1/5 = 0.2

Haley rate of participation = 20.2% = 20.2/100 = 0.202

Natalia rate of participation = 0.19

On comparison from each of them, the participant from Haley is the most and participant from Natalia is the least.

Hence, the least participant is from Natalia and the greatest is from Haley.

To know more about Percentage visit:https://brainly.com/question/16797504

#SPJ1

The volume of the region bounded by the two paraboloids is 32π/5 cubic units.

To find the volume of the region bounded by the two paraboloids, we need to determine the limits of integration for each variable.

Since the two paraboloids intersect in a curve, we can use this curve as a boundary to split the region into two parts.

First, let's find the curve of intersection by setting the two equations equal to each other:

[tex]12 - x^2 - y^2 = 2x^2 + 2y^2\\10x^2 + 10y^2 = 12\\x^2 + y^2 = 6/5[/tex]

This is the equation of a circle with center at the origin and radius [tex]\sqrt{(6/5)[/tex]

So we can use cylindrical coordinates to integrate over this region.

The limits for z are from the lower paraboloid to the upper paraboloid:

[tex]2x^2 + 2y^2 \leq z\leq 12 - x^2 - y^2[/tex]

In cylindrical coordinates, we have:

[tex]0 \leq r \leq \sqrt{(6/5)}\\0 \leq \theta \leq 2\pi \\2r^2 \leq z \leq 12 - r^2[/tex]

So the volume of the region is given by the triple integral:

V = ∫∫∫ dz r dr dθ

where the limits of integration are as described above. Therefore, we have:

[tex]V = \int\limits^{2\pi }_0 {\int\limits^{\sqrt{6/5}}_0 {\int\limits^{12-r^2}_{2r^2} \, dz}\ r \, dr } \, d\theta[/tex]

Evaluating the integral, we get:

V = 32π/5

Therefore, the volume of the region bounded by the two paraboloids is 32π/5 cubic units.

Learn more about volume of the region

brainly.com/question/29108583

#SPJ11

The sample size needed for the sampling distribution of sample proportions to have a standard deviation of 0.02 is approximately 628 children.



The formula for the standard deviation of the sampling distribution of sample proportions is:
[tex]σp = sqrt[p(1-p)/n][/tex]

Where p: population proportion (0.49 in this case) and n: sample size.

We are given that σp = 0.02. So, we can set up the equation:
[tex]0.02 = sqrt[0.49(1-0.49)/n][/tex]

Simplifying:
0.0004 = 0.24/n
n = 0.24/0.0004
n = 627.5 = 628

However, this is only an estimate because the sample size must be a whole number. Since we cannot have a fractional sample size, we round up to the nearest whole number:

n = 628

To calculate the sample size (n) needed to achieve a standard deviation of 0.02 for the sampling distribution of sample proportions, we'll use the formula:

[tex]Standard Deviation = sqrt[(P * (1 - P)) / n][/tex]

where P: proportion of children that catch a cold while at school (0.49), and n: sample size we want to find. We're given the desired standard deviation as 0.02. Now, let's solve for n:

[tex]0.02 = sqrt[(0.49 * (1 - 0.49)) / n][/tex]

Square both sides to get rid of the square root:
0.0004 = (0.49 * 0.51) / n

Now, solve for n:

n = (0.49 * 0.51) / 0.0004
n = 627.75

Since we can't have a fraction of a child, we'll round up to ensure the standard deviation is no greater than 0.02:

n = 628 children

Learn more about standard deviation here:

https://brainly.com/question/23907081

#SPJ11

Answer:

=25

Step-by-step explanation:

Perimeter of a square = 4L

20 = 4L

divide both sides by 4

L = 5[ length is 5cm]

Area of a square = L*L

Area = 5cm times 5cm

Area = 25cm^2

Answer:

kite

4x + 1 = 17 6y - 3 = 21

4x = 16 6y = 24

x = 4 y = 4

The value of the fourth term f(4) in the sequence is 0

From the question, we have the following parameters that can be used in our computation:

If f(1) = 2, f(2) = 4

f(n)=2f (n - 1) - 2f (n - 2)

Using the given recursive formula, we can find the value of f(3) and f(4) by working backwards:

f(3) = 2f(2) - 2f(1) = 2(4) - 2(2) = 8 - 4 = 4

f(4) = 2f(3) - 2f(2) = 2(4) - 2(4) = 8 - 8 = 0

Therefore, f(4) = 0.

Read more about sequence at

https://brainly.com/question/30499691

#SPJ1

The measures of the angles in the triangle are: A = 36.87 degree, B = 71.37 degrees
C = 72.76 degrees

Using the law of cosines, we can solve for angle A:

a^2 = b^2 + c^2 - 2bc*cos(A)
6^2 = b^2 + 10^2 - 2*6*10*cos(A)
36 = b^2 + 100 - 120*cos(A)
b^2 = 84 - 100 + 120*cos(A)
b^2 = -16 + 120*cos(A)

Now, using the law of sines, we can solve for angle B:

sin(B)/b = sin(A)/a
sin(B)/b = sin(A)/6
sin(B) = (b/6)*sin(A)
sin(B) = (1/6)*sqrt(-16 + 120*cos(A))*sin(A)

We can substitute this expression for sin(B) into the equation for the law of cosines to solve for angle B:

c^2 = a^2 + b^2 - 2ab*cos(B)
10^2 = 6^2 + b^2 - 2*6*b*sin(B)
100 = 36 + b^2 - 2*6*b*((1/6)*sqrt(-16 + 120*cos(A))*sin(A))
64 = b^2 - b*sqrt(-16 + 120*cos(A))*sin(A) - 32*cos(A)

This is a quadratic equation in b. Solving for b using the quadratic formula, we get:

b = (1/2)*sqrt((-16 + 120*cos(A))*sin(A)^2 + 128*cos(A) + 64)

Substituting this expression for b back into the equation for sin(B), we get:

sin(B) = (1/6)*sqrt(-16 + 120*cos(A))*sin(A)
sin(B) = (1/6)*sqrt((-16 + 120*cos(A))*sin(A)^2 + 128*cos(A) + 64)

Now we can use the inverse sine function to solve for angles A and B:

A = sin^-1(6/10) = 36.87 degrees
B = sin^-1((1/6)*sqrt((-16 + 120*cos(A))*sin(A)^2 + 128*cos(A) + 64)) = 71.37 degrees

Finally, we can solve for angle C:

C = 180 - A - B = 72.76 degrees

Therefore, the measures of the angles in the triangle are:

A = 36.87 degrees
B = 71.37 degrees
C = 72.76 degrees

to learn more about angles click here:

https://brainly.com/question/30162248

#SPJ11

Yes, this is the algorithm and its implementation in Python for finding the largest difference between two consecutive integers in a list

Algorithm to find the largest difference between two consecutive integers in a list:

a.) We calculate the difference between the current element and the next element in the list by subtracting the current element from the next element.

b). We check if this difference is greater than the current max_diff. If it is, we update max_diff to this difference.

Lear more about Algorithm

brainly.com/question/28724722

#SPJ11

The upper and lower quartiles of the discounts are £45 and £20 respectively.

The interquartile range of the discounts is £25.

The upper and lower quartiles of the discounts can be calculated by using the following mathematical expressions;

Upper quartile, P₇₅ = 80 × 75/100

Upper quartile, P₇₅ = 60, which corresponds to £45.

Lower quartile, P₂₅ = 80 × 25/100

Lower quartile, P₂₅ = 20, which corresponds to £20.

Mathematically, the interquartile range (IQR) of a data set is typically calculated as the difference between the first quartile (Q₁) and third quartile (Q₃):

Interquartile range (IQR) = Q₃ - Q₁ = P₇₅ - P₂₅

Interquartile range (IQR) = 45 - 20

Interquartile range (IQR) = £25.

Read more about Interquartile range here:

https://brainly.com/question/4102829

#SPJ1

The expression for h is h = 2 × √(99)

The Pythagorean theorem states that in a right triangle, the square of the length of the hypotenuse is equal to the sum of the squares of the lengths of the other two sides.

An expression is a combination of numbers, variables, and operations that can be evaluated to produce a value. Expressions can be as simple as a single variable, such as x, or complex, involving multiple variables, constants, and functions.

According to the given information:

We can use the Pythagorean theorem to relate the slant height, the radius, and the height of a cone:

s² = r² + h²

Since s = 5r and r = 4, we have:

s = 5r = 5(4) = 20

Plugging this into the equation above, we get:

20² = 4² + h²

Simplifying and solving for h, we have:

h² = 20² - 4² = 396

h = √(396) = √(4 × 99) = 2 ×√(99)

Therefore, the expression for h is h = 2 × √(99) when r = 4 and s = 5r.

To know more about Pythagorean theorem and Expression visit:

https://brainly.com/question/1859113

#SPJ1