Acyl groups generated during metabolic processes involving carbohydrates and fatty acids are activated by attachment to which of the following molecules? (Select all that apply). O biotin O glyceraldehyde 3-phosphate O coenzyme A O pyruvate

Answers

Answer 1

Acyl groups generated during metabolic processes involving carbohydrates and fatty acids are activated by attachment to coenzyme A (CoA). Therefore, the correct answer is: coenzyme A

Acyl groups are important chemical intermediates involved in various metabolic processes, including the breakdown of carbohydrates and fatty acids.

These groups are activated by attachment to coenzyme A (CoA), which facilitates their transfer between different metabolic pathways. CoA plays a crucial role in energy metabolism and is involved in numerous cellular processes.

To learn more about Acyl groups here:

https://brainly.com/question/28270789

#SPJ11


Related Questions

. why after the first step (the addition of chlorosulfonic acid to formanilide) was the reaction mixture poured onto ice?

Answers

The addition of chlorosulfonic acid to formanilide is an exothermic reaction that generates heat. To prevent the reaction from getting out of control and potentially causing a safety hazard, the reaction mixture is poured onto ice to quickly cool and quench the reaction.

Additionally, the ice helps to hydrolyze any excess chlorosulfonic acid and neutralize any remaining acidic impurities, making it easier to isolate the desired product.
After the first step in the synthesis process, the reaction mixture is poured onto ice to achieve two main goals: 1) to quench the reaction by rapidly cooling down the mixture, and 2) to facilitate the precipitation of the product. The addition of chlorosulfonic acid to formanilide generates heat, and pouring the mixture onto ice helps to control the reaction rate, ensuring the desired product is formed without any unwanted side reactions. The cooling process also promotes the product to precipitate, making it easier to isolate and purify.

To learn more about exothermic  visit;

https://brainly.com/question/31214950

#SPJ11

Write the two chemical reactions that describe what happened in step 13. State what observations match with each equation. In several places you were advised not to add too much liquid or "it may be difficult to recover your crystals later." Explain this advice. (a) Calculate the theoretical yield for alum. The atomic weights of K, AI, S, O, and H can be found on the back cover of this lab manual. (b) Calculate the % experimental yield. % experimental yield = grams of alum obtained in experiment/grams of alum theoretically produced x 100

Answers

(a) To calculate the theoretical yield for alum (KAl(SO4)2·12H2O)

(b) To calculate the % experimental yield, (grams of alum obtained in experiment / grams of alum theoretically produced) x 100 then divide the actual yield (grams of alum obtained in the experiment) by the theoretical yield (grams of alum theoretically produced) and multiply by 100 to get the percentage.


Regarding the advice not to add too much liquid, this is because excessive liquid can cause the solubility of your target compound to increase, making it difficult to recover the desired crystals during the crystallization process. Less liquid means a more concentrated solution, which allows the crystals to form more easily and be collected.
(a) To calculate the theoretical yield for alum (KAl(SO4)2·12H2O), you'll need the atomic weights of K, Al, S, O, and H, as well as the stoichiometry of the reaction. Based on the balanced equation, determine the limiting reactant, and then use its moles and stoichiometry to find the moles of alum theoretically produced. Multiply the moles of alum by its molar mass to get the theoretical yield in grams.
(b) To calculate the % experimental yield, use the following formula:
% experimental yield = (grams of alum obtained in experiment / grams of alum theoretically produced) x 100
Divide the actual yield (grams of alum obtained in the experiment) by the theoretical yield (grams of alum theoretically produced) and multiply by 100 to get the percentage.

To learn more about Alum, click here:

brainly.com/question/3000143

#SPJ11

Consider the titration of HClO4 with NaOH. What is the pH after addition of 81 mL of 0.40 M NaOH to 80.0 mL of 0.40 M HClO4? 12.80 12.13 11.40 10.76 10.09

Answers

The pH after addition of 81 mL of 0.40 M NaOH to 80.0 mL of 0.40 M HClO4 is 11.40.

In the titration of HClO4 with NaOH, after the addition of 81 mL of 0.40 M NaOH to 80.0 mL of 0.40 M HClO4, the pH can be determined by first calculating the moles of each reactant and then finding the resulting moles of OH- ions.

Moles of HClO4 = (80.0 mL)(0.40 mol/L) = 32.0 mmol
Moles of NaOH = (81.0 mL)(0.40 mol/L) = 32.4 mmol

Since the reaction between HClO4 and NaOH goes to completion, the moles of NaOH in excess are:

Excess moles of NaOH = 32.4 mmol - 32.0 mmol = 0.4 mmol

Now, we need to calculate the concentration of OH- ions in the solution:

[OH-] = (0.4 mmol) / (80.0 mL + 81.0 mL) = 0.4 mmol / 161.0 mL ≈ 0.00248 mol/L

Using the relationship between the pOH and the concentration of OH- ions:

pOH = -log10([OH-]) ≈ -log10(0.00248) ≈ 2.605

Finally, we can calculate the pH using the relationship between pH and pOH:

pH = 14 - pOH ≈ 14 - 2.605 ≈ 11.395

Therefore, the pH after the addition of 81 mL of 0.40 M NaOH to 80.0 mL of 0.40 M HClO4 is approximately 11.40.

Know more about pH here:

https://brainly.com/question/15289741

#SPJ11

A KNO3 solution is made using 80.4 g of KNO3 and diluting to a total solution volume of 1.30 L.A) Calculate the molarity of the solution.B) Calculate the mass percent of the solution. (Assume a density of 1.04 g/mL for the solution.)

Answers

A. The KNO_3 solution has a molarity of 0.610 M.

B. The KNO3 solution has a mass percent of 5.96%.

What is the formula for solute percentage by mass?

When the mass of a solute and the mass of a solution are both given, the mass percent is used to express the concentration of a solution.

Mass Percent=  (mass of solute / mass of solution)×100%

A) To calculate the molarity of the solution,

Number of moles of KNO3 = mass of KNO3 / molar mass of KNO3

Molar mass of KNO3 = 39.1 g/mol (K) + 14.0 g/mol (N) + 3(16.0 g/mol) (O) = 101.1 g/mol

Number of moles of KNO3 = 80.4 g / 101.1 g/mol = 0.794 mol

we can calculate the molarity:

Molarity = number of moles of solute / volume of solution in liters

Molarity = 0.794 mol / 1.30 L = 0.610 M

B) The mass percent of the solution:

mass percent = (mass of solute / mass of solution) x 100%

By using the density and volume, we can calculate mass of the solution,

mass of solution = density x volume = 1.04 g/mL x 1.30 L = 1.35 kg

The mass of solute is given as 80.4 g.

mass percent = (80.4 g / 1.35 kg) x 100% = 5.96%

To know more about the molarity visit:

https://brainly.com/question/30404105

#SPJ1

The KNO3 solution has a molarity of 0.610 M and a mass percent of 5.95%, respectively.

Molarity: What is it?

Molarity, a unit used to gauge a solution's concentration, is defined as the number of moles of solute per litre of solution.

A) The molarity of the solution can be calculated using the formula below:

Molarity (M) is calculated as moles of solute per litre of solution.

First, we must determine how many moles of KNO3 there are in 80.4 g:

KNO3 has a molar mass of 101.1 g/mol (39.1 + 14.0 + (3 x 16.0)).

KNO3 mass divided by its molar mass yields the number of moles: 80.4 g / 101.1 g/mol, or 0.794 mol.

Molarity (M) is calculated as follows: 0.794 mol/1.3 L (moles of solute/volume of solution in litres = 0.610 M.

B) The following formula can be used to determine the mass percent of the solution:

Mass Percent = (Mass of Solute / Mass of Solution) x 100%

Calculating the mass of the solution can be done using its volume and density:

Density times volume equals 1.04 g/mL x 1.30 L, or 1.352 g, for a solution's mass.

KNO3's mass in the solution is already specified as 80.4 g.

We can now determine the mass percentage of the solution:

(80.4 g/1.352 g) x 100% = 5.95% (Mass of Solute/Mass of Solution) x 100% = Mass Percent

To know more about mass percent visit:

https://brainly.com/question/30766111

#SPJ1

The smallest ketone is 2-propanone, which has a 3-carbon chain. Why aren't there ketones with 1-carbon or 2-carbon chains? Give an explanation.

Answers

The smallest ketone is 2-propanone, which has a 3-carbon chain. ketones with 1-carbon or 2-carbon chainss is due to the structural requirements of ketones.

Ketones are organic compounds characterized by the presence of a carbonyl functional group (C=O) bonded to two carbon atoms in the molecular structure. The smallest ketone, 2-propanone, also known as acetone, has a 3-carbon chain that satisfies this requirement. In a 1-carbon chain, there is only one carbon atom, which does not provide the necessary structure to form a carbonyl group bonded to two carbon atoms.

Similarly, a 2-carbon chain also cannot satisfy this requirement as one carbon atom would be occupied by the carbonyl group, leaving only one carbon atom available for bonding, this structure would form an aldehyde, not a ketone, as aldehydes have the carbonyl group bonded to a terminal carbon atom and a hydrogen atom. Therefore, ketones with 1-carbon or 2-carbon chains are not possible due to the structural requirements of ketones, which necessitate a carbonyl group bonded to two carbon atoms in the molecule. The smallest ketone that can exist, 2-propanone, meets these requirements with its 3-carbon chain.

Learn more about ketones at:

https://brainly.com/question/30665943

#SPJ11

I'm taking my DBA (Discussion based assesment) for science, module 2 tomorrow and I wanted to know before hand :

1. How long will it be?
And
2. Will it be hard?

Answers

The length of the discussion based assessment (DBA) for Module 2 of your science class will depend on your teacher and the scope of the topics covered in the module.

What is assessment?

Assessment is the process of gathering information about a person, group, or system in order to make informed decisions. It involves collecting data through observation, interviews, questionnaires, and other methods, then analyzing it to identify strengths, weaknesses, and potential for improvement.

Your teacher should provide you with an estimate of the time expected for the assessment.
As for the difficulty of the assessment, it will depend on your level of
understanding of the topics covered in the module and your ability to apply that knowledge in a discussion-based format. It is difficult to predict how hard the assessment will be, as everyone's level of mastery of the material will be different. Your best bet is to review the material that has been covered in the module and be prepared to answer questions based on your understanding.

To learn more about assessment
https://brainly.com/question/29098441
#SPJ1

how many moles of k ions are present in 43.1 ml of a 0.621 m k3po4 solution?

Answers

there are 0.0801 moles of K+ ions present in 43.1 mL of a 0.621 M K3PO4 solution.

The first step to solve this problem is to use the definition of molarity to calculate the number of moles of K3PO4 in the solution:

Molarity (M) = moles of solute / liters of solution

Rearranging this equation, we get:

moles of solute = Molarity (M) x liters of solution

We are given the molarity of the solution as 0.621 M, and the volume of the solution as 43.1 mL. However, we need to convert the volume to liters to use the equation above:

43.1 mL = 43.1 x 10^-3 L

Now, we can calculate the number of moles of K3PO4 in the solution:

moles of K3PO4 = 0.621 M x 43.1 x 10^-3 L
moles of K3PO4 = 0.0267 moles

Since K3PO4 contains three K+ ions per molecule, we can calculate the number of moles of K+ ions in the solution by multiplying the number of moles of K3PO4 by the number of K+ ions per molecule:

moles of K+ ions = 3 x moles of K3PO4
moles of K+ ions = 3 x 0.0267 moles
moles of K+ ions = 0.0801 moles

Therefore, there are 0.0801 moles of K+ ions present in 43.1 mL of a 0.621 M K3PO4 solution.

Visit to know more about Moles:-

brainly.com/question/29367909

#SPJ11

2co2(g) 5h2(g)c2h2(g) 4h2o(g) using standard absolute entropies at 298k, calculate the entropy change for the system when 1.73 moles of co2(g) react at standard conditions. s°system = j/k

Answers

The entropy change for the system when 1.73 moles of CO₂ react at standard conditions is -617.5 J/K.

The entropy change for the given reaction can be calculated using the formula ΔS° = ΣnS°(products) - ΣmS°(reactants), where n and m are the stoichiometric coefficients and S° is the standard absolute entropy.

The balanced equation shows that 2 moles of CO₂ react with 5 moles of H₂ to produce 1 mole of C₂H₂ and 4 moles of H₂O. Therefore, the entropy change for the system can be calculated as follows:

ΔS° = (1 mol C₂H₂ x S°(C₂H₂)) + (4 mol H₂O x S°(H₂O)) - (1.73 mol CO₂ x S°(CO₂)) - (5 x 1.73 mol H₂ x S°(H₂))

ΔS° = (1 mol x 200.9 J/K/mol) + (4 mol x 188.7 J/K/mol) - (1.73 mol x 213.6 J/K/mol) - (5 x 1.73 mol x 130.7 J/K/mol)

ΔS° = -617.5 J/K

Therefore, the entropy change for the system when 1.73 moles of CO₂ react at standard conditions is -617.5 J/K. This indicates that the reaction leads to a decrease in the randomness or disorder of the system.

Learn More about entropy

https://brainly.com/question/30481619

#SPJ4

what will be the ph of a buffer solution with an acid (pka4.9) that is exactly ten times as concentrated as its conjugate base?

Answers

pH of the buffer solution with an acid (pKa = 4.9) that is exactly ten times as concentrated as its conjugate base will be approximately 3.9.

What is pH?

pH is a measure of the acidity or alkalinity of a solution. It is a logarithmic scale that ranges from 0 to 14, where pH 7 is considered neutral, pH less than 7 indicates acidity, and pH greater than 7 indicates alkalinity.

The pH of a buffer solution can be calculated using the Henderson-Hasselbalch equation, which is given by:

pH = pKa + log([A-]/[HA])

where pKa is the negative logarithm of the acid dissociation constant, [A-] is the concentration of the conjugate base, and [HA] is the concentration of the acid.

In this case, the acid is 10 times as concentrated as its conjugate base, which means [HA] = 10[A-].

Let's assume the concentration of the conjugate base is denoted by [A-] = x. Then the concentration of the acid [HA] will be 10x.

Plugging these values into the Henderson-Hasselbalch equation:

pH = 4.9 + log(x/(10x))

pH = 4.9 + log(1/10)

pH = 4.9 - 1

pH = 3.9

Learn more about pH from the given link

https://brainly.com/question/172153

#SPJ1

Arrange the following alkaline-earth-metal iodates in order of decreasing solubility in water: Ba(IO3)2, Be(IO3)2, Ra(IO3)2, Mg(IO3)2. Note that IO3- is a large anion.

Answers

The final order of decreasing solubility in water for these alkaline-earth-metal iodates is Be(IO3)2, Mg(IO3)2, Ra(IO3)2, and Ba(IO3)2.

The compounds are Ba(IO3)2, Be(IO3)2, Ra(IO3)2, and Mg(IO3)2. The anion in these compounds is IO3-, which is a large anion.

Step 1: Identify the cations in each compound. The cations in these compounds are Ba2+, Be2+, Ra2+, and Mg2+.

Step 2: Understand the general trend of solubility for alkaline-earth-metal iodates. In general, the solubility of alkaline-earth-metal iodates decreases as the cation's size increases.

Step 3: Determine the sizes of the cations. The sizes of the cations are as follows: Ba2+ > Ra2+ > Mg2+ > Be2+. Step 4: Arrange the compounds in order of decreasing solubility based on the cation sizes. Considering the trend and the cation sizes, the order of decreasing solubility is

: Be(IO3)2 > Mg(IO3)2 > Ra(IO3)2 > Ba(IO3)2.

To know more about solubility refer to

https://brainly.com/question/23946616

#SPJ11

from the choices provided below, list the reagent(s) in order that can be used to prepare hexanoic acid from hexanal (list your answer as a letter (single-step transformation) or series of letters (multi-step transformation) in the order the reagents are used, with no commas separating them. no more than four steps are required for this synthesis.)
a. K2Cr2O7, H2SO4 in H2O, acetone
b. CL2, KOH
C. (1) BH3, THP (2) H2O2, NaOH, H2O
d. PBr3
e. (CH3)2S
f. Mg, ether
g. HCL, H2O
h. CO2
i. O3
j. oxirane(ethylene oxide)

Answers

The correct series of reagents that can be used to prepare hexanoic acid from hexanal in no more than four steps are:
a. K2Cr2O7, H2SO4 in H2O, acetone

The first step involves the oxidation of hexanal to hexanoic acid, which can be achieved by using a strong oxidizing agent such as K2Cr2O7 and an acidic medium. The mixture is then allowed to react with acetone to form a stable intermediate compound.
Overall, the process involves a single-step transformation and is a straight forward method to synthesize hexanoic acid from hexanal. This process is widely used in the chemical industry to produce various organic compounds, including carboxylic acids.
In conclusion, the use of K2Cr2O7, H2SO4 in H2O, and acetone (Option a) is an effective method to prepare hexanoic acid from hexanal in a simple and efficient manner. This process can be carried out using basic laboratory equipment and is therefore an attractive option for researchers and scientists working in the field of organic chemistry.

for more such question on reagents

https://brainly.com/question/29713522

#SPJ11

a sample of liquid mercury is heated with an electrical coil. if 27.8 joules of energy are added to a 13.1 gram sample initially at 22.9°c, what is the final temperature of the mercury?

Answers

To solve this problem, we can use the specific heat capacity of liquid mercury, which is 0.14 J/g° C.
First, we can calculate the amount of heat energy required to raise the temperature of the mercury sample from 22.9°C to the final temperature (let's call it T f):

Q = m x c x ΔT
where Q is the heat energy, m is the mass of the sample (13.1 g), c is the specific heat capacity of mercury (0.14 J/g° C), and ΔT is the change in temperature (T f - 22.9°C).
We can rearrange this equation to solve for T f:
T f = (Q / (m x c)) + 22.9
Now we just need to calculate Q, which is the 27.8 joules of energy added to the sample:
T f = (27.8 J / (13.1 g x 0.14 J/g° C)) + 22.9
T f = 44.6°C
Therefore, the final temperature of the mercury sample is 44.6°C.


To find the final temperature of the liquid mercury when 27.8 joules of energy are added to a 13.1 gram sample initially at 22.9°C using an electrical coil, follow these steps:
1. First, find the specific heat capacity of mercury, which is 0.14 J/(g·°C).
2. Next, use the formula: q = mcΔT, where q is the energy added (27.8 joules), m is the mass of the sample (13.1 grams), c is the specific heat capacity of mercury (0.14 J/(g·°C)), and ΔT is the change in temperature.
3. Rearrange the formula to solve for ΔT: ΔT = q/(mc).
4. Plug in the values: ΔT = 27.8 / (13.1 × 0.14) = 15.2°C (approximately).
5. Finally, add the initial temperature to the temperature change: 22.9°C + 15.2°C = 38.1°C.
So, the final temperature of the liquid mercury when heated with an electrical coil and 27.8 joules of energy is 38.1°C.

Visit here to learn more about heat capacity:

brainly.com/question/28302909

#SPJ11

what is the pH of a 1.2 M pyridine solution that has Kb-1.9% 10-9? The equation for the dissociation of pyridine is C,HsN(aq) + H20 (l) C5H5 NH + (aq) + OH-(aq). 4.32 10.68 O 9.68 8.72

Answers

The pH of a 1.2 M pyridine solution with a Kb of 1.9 x 10⁻⁹ is approximately 9.68.

To calculate the pH of a 1.2 M pyridine solution with a Kb of 1.9 x 10⁻⁹, we first need to find the concentration of OH⁻ ions in the solution. Since the dissociation of pyridine is given by:

C₅H₅N(aq) + H₂O(l) ⇌ C₅H₅NH⁺(aq) + OH⁻(aq)

We can use the Kb expression to find the OH⁻ concentration:

Kb = [C₅H₅NH⁺][OH⁻] / [C₅H₅N]

Let x be the concentration of both C₅H₅NH⁺ and OH⁻ at equilibrium. Then:

(1.9 x 10⁻⁹) = (x)(x) / (1.2 - x)

Assuming x is small compared to 1.2, we can approximate:

(1.9 x 10⁻⁹) ≈ (x²) / (1.2)

Now, solve for x:

x² = (1.9 x 10⁻⁹)(1.2)
x ≈ 4.77 x 10⁻⁵

This x value represents the concentration of OH⁻ ions. To calculate the pH, first find the pOH:

pOH = -log₁₀([OH⁻]) = -log₁₀(4.77 x 10⁻⁵) ≈ 4.32

Now, we can use the relationship between pH and pOH:

pH + pOH = 14

Finally, find the pH:

pH = 14 - 4.32 ≈ 9.68

So, the pH of the 1.2 M pyridine solution is approximately 9.68.

Learn more about pH here: https://brainly.com/question/26424076

#SPJ11

We can process oxide ceramics by reacting different reactant oxides in solid state at migh temperatures. This is called calcination. a. If I want to calcine 20 grams of Pb(Zr1/2T11/2)03 (known as PZT) using PbO, ZrO2 and TiO2 as my reactants, how many grams of Pbo, ZrO2 and TiO2 I would need to use. shiw your work

Answers

To calcine 20 grams of PZT, you will need 12.54 grams of PbO, 4.62 grams of ZrO₂, and 2.84 grams of TiO₂.

To determine the required amounts of PbO, ZrO₂, and TiO₂, we need to use the molar ratios in the PZT formula: Pb(Zr1/2Ti1/2)O₃. Firstly, calculate the molar mass of PZT:

1 Pb: 207.2 g/mol
1/2 Zr: (91.22 g/mol) / 2 = 45.61 g/mol
1/2 Ti: (47.87 g/mol) / 2 = 23.935 g/mol
3 O: 3 * 16 = 48 g/mol
Total: 207.2 + 45.61 + 23.935 + 48 = 324.745 g/mol

Now, find the moles of PZT in 20 grams:
20 g / 324.745 g/mol ≈ 0.0616 moles

Determine the amounts of each reactant needed, based on their molar ratios in PZT:
PbO: 0.0616 moles * 207.2 g/mol = 12.54 grams
ZrO₂: 0.0616 moles * (45.61 * 2) g/mol = 4.62 grams
TiO₂: 0.0616 moles * (23.935 * 2) g/mol = 2.84 grams

To know more about molar mass click on below link:

https://brainly.com/question/22997914#

#SPJ11

Fill in the table with the properties of the different types of nuclear radiation. Change to Nam Symbol Composition Charge the emitting nucleus alpha beta gamma 0 0 mass number unchanged atomic number 1 4 or He or a a photon mass number mass number 2 protons &unchanged, atomic 0 2 neutrons atomic number -2 number unchanged Reset Zoom

Answers

Sure, here's a table with the properties of the different types of nuclear radiation:


| Type of Radiation | Symbol | Composition | Charge | Mass Number | Atomic Number |


|-------------------|--------|-------------|--------|-------------|---------------|


| Alpha             | α      | 2 protons + 2 neutrons | +2     | 4           | 2             |


| Beta              | β      | High-energy electron or positron | -1 or +1 | 0 | 0 |


| Gamma             | γ      | High-energy photon | 0      | 0           | 0             |



As you can see, alpha particles are composed of 2 protons and 2 neutrons, and have a charge of +2. They have a mass number of 4 and an atomic number of 2 (since they are helium nuclei).

Beta particles can be either electrons or positrons (the antiparticle of the electron), and have a charge of -1 or +1, respectively.

They have no mass or atomic number, as they are simply high-energy particles emitted from the nucleus. Finally, gamma rays are high-energy photons, which have no charge, mass number, or atomic number.

They are simply electromagnetic radiation emitted from the nucleus during.

To know more about radioactive decay here

https://brainly.com/question/1770619

#SPJ11

In which form would a given piece of DNA be the longest? a. B form b. these would all be the same length c. A form d. Z form

Answers

The B-form of DNA is the most common and stable form of DNA, and it is the form that DNA takes under normal physiological conditions. Option a.

The A-form of DNA and the Z-form of DNA are less common and less stable than the B-form. The A-form of DNA is a shorter and wider structure than the B-form, while the Z-form of DNA is a longer and thinner structure with a zig-zag shape. Therefore, in general, DNA would be longest in the Z-form compared to the B-form and the A-form.

However, it is important to note that the length of the longest DNA can vary depending on the specific sequence of nucleotides and the environmental conditions.

To learn more about DNA, click here:

https://brainly.com/question/264225

#SPJ11

Acid deposition occurs when the1. primary pollutants sulfur dioxide and nitrogen oxides react with water vapor to form acidic solutions that precipitate from the sky.2. primary pollutants of sulfuric acid and nitric acid fall to the surface in precipitation that damages vegetation and aquatic ecosystems.3. secondary pollutants of sulfur dioxide and nitrogen oxides react with water vapor to form acidic solutions, also known as "acid rain."4. atmospheric pollutants from fossil fuel combustion react with sunlight to form acid rain, snow, or fog, which moves with wind patterns.

Answers

Acid deposition occurs when the secondary pollutants of sulfur dioxide and nitrogen oxides react with water vapor to form acidic solutions, also known as "acid rain."

Acid deposition is the result of the interaction between primary pollutants, such as sulfur dioxide (SO₂) and nitrogen oxides (NOₓ), which are emitted from fossil fuel combustion, and the atmosphere.

These primary pollutants react with water vapor in the air to form secondary pollutants, including sulfuric acid (H₂SO₄) and nitric acid (HNO₃).

The acidic solutions then combine with precipitation, forming acid rain, snow, or fog. Acid deposition can have negative impacts on vegetation, aquatic ecosystems, and infrastructure as it moves with wind patterns and falls to the Earth's surface.

The process is a significant environmental concern, as it contributes to the acidification of soil and water bodies, and can harm wildlife and human health.

To know more about sulfur dioxide click on below link:

https://brainly.com/question/7072447#

#SPJ11

if the ph at one half the first and second equivalence points of a dibasic acid is 4.50 and 7.24, respectively, what are the values for pka1 and pka2?

Answers

the values for pKa1 and pKa2 are 4.50 and 7.24, respectively of a dibasic acid .

To solve this problem, we need to use the Henderson-Hasselbalch equation, which relates the pH of a solution to the pKa and the concentrations of acid and conjugate base:

pH = pKa + log([A^-]/[HA])

At the first equivalence point, half of the acid has been neutralized by a strong base, so the concentrations of HA and A^- are equal. Therefore:

pH = pKa1 + log(1)

pH = pKa1

We know that the pH at this point is 4.50, so:

pKa1 = 4.50

At the second equivalence point, all of the acid has been neutralized, so the concentration of A^- is equal to the initial concentration of acid, while the concentration of HA is zero. Therefore:

pH = pKa2 + log([A^-]/0)

pH = pKa2 - infinity

Since the log of zero is negative infinity, we can simplify this to:

pH = pKa2

We know that the pH at this point is 7.24, so:

pKa2 = 7.24

Therefore, the values for pKa1 and pKa2 are 4.50 and 7.24, respectively.
Hi! To find the pKa1 and pKa2 values for the dibasic acid, we will use the given pH values at half the first and second equivalence points. The pH at these points are related to the pKa values by the Henderson-Hasselbalch equation:

pH = pKa + log([A-]/[HA])

At half the first equivalence point, the ratio of [A-] to [HA] is 1, so the equation becomes:

pH = pKa1 + log(1) → pH = pKa1 (since log(1) = 0)

For the first half-equivalence point, pH = 4.50, so pKa1 = 4.50.

At half the second equivalence point, the ratio of [A2-] to [HA-] is also 1, so the equation becomes:

pH = pKa2 + log(1) → pH = pKa2 (since log(1) = 0)

For the second half-equivalence point, pH = 7.24, so pKa2 = 7.24.

Therefore, the values for pKa1 and pKa2 are 4.50 and 7.24, respectively.

To know more about Henderson-Hasselbalch equation: click here:

brainly.com/question/30466186

#SPJ11

Given the following reaction in acidic media: Fe(2+) + Cr2O7(2-) --> Fe(3+) + Cr(3+) answer the following question: The coefficient for water in the balance reaction is: a) 1 b) 3 c) 5 d) 7 e) none of these

Answers

The coefficient for water ([tex]H_{2} O[/tex]) in the balanced acidic reaction is 7, so the correct answer is d) 7.

The coefficient for water in the balanced acidic reaction is none of these, as there is no water involved in this redox reaction.

To balance the given reaction in acidic media, follow these steps:
1. Write the unbalanced half-reactions:
Fe(2+) → Fe(3+)
[tex]Cr_{2} O_{7}[/tex](2-) → Cr(3+)
2. Balance atoms other than O and H:
Fe(2+) → Fe(3+)
[tex]Cr_{2} O_{7}[/tex](2-) → 2Cr(3+)
3. Balance O atoms by adding water:
Fe(2+) → Fe(3+)
Cr2O7(2-) → 2Cr(3+) + 7[tex]H_{2} O[/tex]
4. Balance H atoms by adding H+ ions:
Fe(2+) → Fe(3+)
[tex]Cr_{2} O_{7}[/tex](2-) + 14H+ → 2Cr(3+) + 7[tex]H_{2} O[/tex]
5. Balance charges by adding electrons (e-):
Fe(2+) → Fe(3+) + e-
[tex]Cr_{2} O_{7}[/tex](2-) + 14H+ + 6e- → 2Cr(3+) + 7[tex]H_{2} O[/tex]
6. Make electrons equal in both half-reactions and add them:
6Fe(2+) → 6Fe(3+) + 6e-
[tex]Cr_{2} O_{7}[/tex](2-) + 14H+ + 6e- → 2Cr(3+) + 7[tex]H_{2} O[/tex]
———————————————
6Fe(2+) + [tex]Cr_{2} O_{7}[/tex](2-) + 14H+ → 6Fe(3+) + 2Cr(3+) + 7[tex]H_{2} O[/tex]
The balanced reaction is:
6Fe(2+) + [tex]Cr_{2} O_{7}[/tex](2-) + 14H+ → 6Fe(3+) + 2Cr(3+) + 7[tex]H_{2} O[/tex]
The coefficient for water ([tex]H_{2} O[/tex]) in the balanced reaction is 7, so the correct answer is d) 7.

learn more about acidic here

https://brainly.com/question/14072179

#SPJ11

Part A (1 of 2) Draw the curved arrows for Step 4 of this mechanism. Arrow-pushing Instructions Н . sa CHE CH3 :0.-H Н3С. Step 4 -CH₃ H3C CH3 H3CH Part A (1 of 2) Draw the curved arrows for Step 2 of this mechanism. Arrow-pushing Instructions H Step 2 Н3С. CH3 H3 CH3 CH H3C H H₂CCC НЫС H-ö-CH3

Answers

Drawing the curved arrows for Step 4 of the given mechanism. Arrow-pushing Instructions Н . sa CHE CH3 :0.-H Н3С. Step 4 -CH₃ H3C CH3 H3CH :

Step 4:
1. Identify the nucleophile and electrophile in the reaction. Nucleophiles generally have a negative charge or lone pair of electrons, and electrophiles typically have a positive charge or an electron-deficient atom


2. Determine the direction of the curved arrow. The arrow should start from the nucleophile (lone pair or negatively charged atom) and point towards the electrophile (positively charged atom or electron-deficient atom).


3. Draw the curved arrow, representing the flow of electrons in the reaction. Ensure the arrow's tail starts at the nucleophile and the arrowhead points to the electrophile.

To know more about nucleophile and electrophile :

https://brainly.com/question/28590500

#SPJ11

calculate the isoionic and isoelectric ph of 0.03396 m phenylalanine. enter your answers to the hundredths place. Amino Acid pKa1 pKa2
Asparagine 2.16 8.73
Glutamine 2.19 9.00
Isoleucine 2.318 9.758
Leucine 2.328 9.744
Methionine 2.18 9.08
Phenylalanine 2.20 9.31
Proline 1.952 10.640
Serine 2.187 9.209
Tryptophan 2.37 9.33
Valine 2.286 9.719
isoionic pH=

Answers

The isoionic and isoelectric ph of 0.03396 m phenylalanine is 5.76. The isoionic pH is the pH at which the amino acid has a net charge of zero.

To calculate the isoionic pH of phenylalanine, we need to find the pH at which the positive and negative charges on the molecule balance each other out. The first step is to determine the pKa values of the ionizable groups in phenylalanine. Phenylalanine has two ionizable groups: the carboxyl group (pKa1 = 2.20) and the amino group (pKa2 = 9.31).
At low pH (below pKa1), the carboxyl group will be protonated (COOH) and carry a positive charge, while the amino group will be neutral. As we increase the pH, the carboxyl group will lose its proton and become negatively charged (COO⁻), while the amino group will still be neutral. At some point, the amino group will start to accept protons and become positively charged (NH₃⁺) as the pH approaches pKa2.
To calculate the isoionic pH, we need to find the pH at which the number of positive charges (from NH₃⁺) equals the number of negative charges (from COO⁻)). This occurs when the pH is equal to the average of the pKa values:
isoionic pH = (pKa1 + pKa2) / 2
isoionic pH = (2.20 + 9.31) / 2
isoionic pH = 5.755
Therefore, the isoionic pH of phenylalanine is 5.76 (rounded to the hundredths place).
isoelectric pH=
The isoelectric pH is the pH at which the amino acid has a net charge of zero. To calculate the isoelectric pH of phenylalanine, we need to consider the two possible charged species of the molecule (NH₃⁺ and COO⁻) and their relative amounts at different pH values. At low pH, the predominant species will be NH₃⁺, which is positively charged. As we increase the pH, more and more NH₃⁺ groups will become neutral as they accept protons, while more and more COO⁻ groups will become negatively charged.
The isoelectric pH is the pH at which the total number of NH₃⁺ groups is equal to the total number of COO⁻ groups. We can find the isoelectric pH by calculating the average of the pKa values for the two ionizable groups that contribute to the charge of the molecule:
isoelectric pH = (pKa1 + pKa2) / 2
isoelectric pH = (2.20 + 9.31) / 2
isoelectric pH = 5.755
Therefore, the isoelectric pH of phenylalanine is 5.76 (rounded to the hundredths place).
Note that the isoionic pH and isoelectric pH are the same for phenylalanine, because it only has one ionizable side chain. For amino acids with multiple ionizable groups (such as histidine or cysteine), the isoionic and isoelectric pH values may differ.

Learn more about isoelectric here

https://brainly.com/question/12996700

#SPJ11

Balance the following redox reaction if it occurs in basic solution. What coefficients in front of Al and Ft in the balanced reaction?al(s) f2(g) → al3 (aq) f-(aq)A) Al = 2, F2 = 3 B) Al = 2, F2 = 6 C) Al = l, F2 = 1 D) Al = 2, F2 = 1 E) Al = 3, F2 = 2

Answers

Al and F2 have the following coefficients in the balanced redox reaction: Al = 2 and F2 = 3. Thus, the right response is A) Al = 2, F2 = 3.

Why Do Redox Reactions Occur?

Redox reactions are chemical reactions involve the transfer of electrons between two reactants. It is possible to identify this electron transfer by changes in the oxidation of the reacting species.

We must increase the oxidation half-reaction by 2 in order to balance the quantity of electrons transferred:

2Al → 2Al₃+ + 6e-

Now we can combine the two half-reactions:

2Al + 3F₂ + 6OH- → 2Al(OH)₃ + 6F-

To balance the equation in basic solution, we add 6OH- to each side to neutralize the H+ ions:

2Al + 3F₂ + 6OH⁻ → 2Al(OH)₃ + 6F⁻ + 6OH⁻

Simplifying, we get:

2Al + 3F₂ + 6OH⁻ → 2Al(OH)₃ + 6F⁻

The coefficients front of Al and F2 balanced reaction are Al = 2, F2 = 3.

To know more about redox reactions visit:-

https://brainly.com/question/13293425

#SPJ1

Draw a detailed mechanism for the reaction of trans-cinnamaldehyde with benzyltriphenylphosphonium chloride to form either (E,E) or (E,Z) 1,4-diphenyl-1,3-butadiene.
This is a Wittig reaction associated with experiment 42 in the 4th edition of Operational Organic Chemistry by Lehman. If you submit a handwritten mechanism, please make sure it is legible and neatly written.

Answers

The Wittig reaction is a popular method for the formation of carbon-carbon double bonds. The reaction between trans-cinnamaldehyde and benzyl-triphenylphosphonium chloride to form (E,E) or (E,Z) 1,4-diphenyl-1,3-butadiene is a classic example of the Wittig reaction.



Here is a detailed mechanism for this reaction:

Step 1: Deprotonation

Benzyltriphenylphosphonium chloride is a ylide, meaning that it has a negatively charged carbon atom. This ylide is deprotonated by a strong base such as sodium hydride (NaH) to form a highly reactive carbanion.

Step 2: Nucleophilic attack

The carbanion then attacks the carbonyl group of trans-cinnamaldehyde, forming an oxaphosphetane intermediate.

Step 3: Ring opening

The oxaphosphetane intermediate then undergoes a ring-opening reaction to form an alkenyl phosphonium salt. This intermediate has a positively charged phosphorus atom and a carbon-carbon double bond.

Step 4: Proton transfer

A proton transfer reaction then occurs, where a proton is transferred from the phosphonium salt to the base used in the reaction, regenerating the ylide.

Step 5: Tautomerization

The alkenyl phosphonium salt undergoes a tautomerization reaction, forming the final product, (E,E) or (E,Z) 1,4-diphenyl-1,3-butadiene.

Overall, this mechanism illustrates how the Wittig reaction can be used to synthesize carbon-carbon double bonds. By carefully controlling the reaction conditions, chemists can selectively form either the (E,E) or (E,Z) isomer of the product.

Learn more about Wittig reaction at https://brainly.com/question/30611258

#SPJ11

what is the hybridization of the central atom in the perbromate bro−4 anion?

Answers

Therefore, the hybridization of the central atom in the perbromate (BrO₄⁻) anion is sp³.

The central atom in the perbromate (BrO4-) anion is bromine (Br). To determine the hybridization of the central atom, we first need to count the total number of valence electrons in the molecule.

Bromine has 7 valence electrons, and each oxygen atom has 6 valence electrons. There are a total of 4 oxygen atoms in the perbromate anion, so the total number of valence electrons is:

7 (from Br) + 4 x 6 (from O) + 1 (for the negative charge) = 32

Next, we need to determine the molecular geometry of the perbromate anion. The Br atom is surrounded by 4 oxygen atoms, giving it a tetrahedral shape.

To achieve this shape, the Br atom must undergo sp3 hybridization. This means that one of the 4 valence electrons of Br is promoted to the 4p orbital, giving it 4 sp3 hybrid orbitals that are used to bond with the oxygen atoms.

Therefore, the hybridization of the central atom (Br) in the perbromate (BrO4-) anion is sp3.

Know more about Hybridization here:

https://brainly.com/question/31485542

#SPJ11

3 consider a binomial probability distribution with p = 0.65 and n = 15. determine the mean and standard deviation of this distribution.

Answers

The mean and standard deviation of the binomial probability distribution is 9.75, and approximately 1.85, respectively.

To calculate the mean and standard deviation for a binomial probability distribution, you can use the formula for the mean and standard deviation in terms of probability and size:

Mean (µ) = n * p
Standard deviation (σ) = √(n * p * (1 - p))

For your given values, p = probability = 0.65 and n = size = 15:

Mean (µ) = 15 * 0.65 = 9.75
Standard deviation (σ) = √(15 * 0.65 * (1 - 0.65)) = √(15 * 0.65 * 0.35) ≈ 1.85

So, the mean of this binomial distribution is 9.75, and the standard deviation is approximately 1.85.

Learn more about binomial probability distribution here: https://brainly.com/question/30049535

#SPJ11

give the systematic name of the alkene, indicating cis or trans configuration. systematic name:

Answers

If the alkene is 2-butene and the substituents on the second carbon are a methyl group and a hydrogen, the cis isomer would be (Z)-2-butene and the trans isomer would be (E)-2-butene.

To give the systematic name of an alkene, you first need to identify the longest carbon chain containing the double bond. Then, you add the suffix "-ene" to the name of the parent hydrocarbon and indicate the position of the double bond with a number. For example, if the longest carbon chain is 6 carbons long and contains a double bond between carbons 2 and 3, the systematic name would be hex-2-ene.

To indicate the cis or trans configuration of the alkene, you look at the orientation of the substituents on each side of the double bond. If the two highest priority substituents are on the same side of the double bond, it is a cis isomer. If they are on opposite sides, it is a trans isomer.

To know more about alkene cis, trans configuration- https://brainly.com/question/31465904

#SPJ11

Reduce the following partial derivatives to an expression containing only alpha p, KT, Cp, Cv and/ or other thermodynamic variables: (a) (partial differential S/ partial differential P)T (b) (partial differential P/ partial differential S)V (c) (partial differential P/ partial differential S) (d) (partial differential V/ partial differential T)U (e) (partial differential U/ partial differential P)T f) (partial differential U/ partial differential P)V (g) (partial differential H/ partial differential P)T ) (h) (partial differential U/ partial differential T)P

Answers

To reduce the partial derivatives using the given thermodynamic variables. Here are the expressions for each of the partial derivatives.


a) (∂S/∂P)_T
Using the Maxwell relation, we can write this as:
(∂S/∂P)_T = -(∂V/∂T)_P
b) (∂P/∂S)_V
Using the Maxwell relation, we can write this as:
(∂P/∂S)_V = -(∂T/∂V)_S
c) (∂P/∂S)
To evaluate this partial derivative, more information about the system is needed.
d) (∂V/∂T)_U
Using the Maxwell relation, we can write this as:
(∂V/∂T)_U = (αP)/Cv, where α is the coefficient of thermal expansion and Cv is the heat capacity at constant volume.
e) (∂U/∂P)_T
This partial derivative cannot be directly expressed in terms of the given variables without more information about the system.
f) (∂U/∂P)_V
This partial derivative also cannot be directly expressed in terms of the given variables without more information about the system.
g) (∂H/∂P)_T
This partial derivative can be written as:
(∂H/∂P)_T = V - T(∂V/∂T)_P
h) (∂U/∂T)_P
Using the heat capacity relation, we can write this as:
(∂U/∂T)_P = Cv, where Cv is the heat capacity at constant volume.
Some of these partial derivatives require more information about the system to be expressed in terms of the given variables.

To learn more about thermal expansion click here https://brainly.com/question/29221601

#SPJ11

a reaction has a rate constant k = 8.54 10-4 m –1 • . s –1 at 45 °c and an activation energy, ea = 90.8 kj. what is the value of k at 25 °c?

Answers

The value of k at 25 °C if rate constant k = 8.54 × 10⁻⁴ m⁻¹s⁻¹ at 45 °C and activation energy (EA) 90.8 Kj is 1.11 x 10⁻⁴ m⁻¹s⁻¹.

To calculate the rate constant (k) at 25°C, we can use the Arrhenius equation:

k2 = A × exp(-Ea/RT)

where k2 is the rate constant at 25°C, A is the pre-exponential factor, Ea is the activation energy, R is the gas constant (8.314 J/mol*K), and T is the temperature in Kelvin (25°C = 298.15 K).

We are given the value of k at 45°C, so we can use that to find the pre-exponential factor:

k1 = 8.54 x 10⁻⁴ m⁻¹s⁻¹ (at 45°C = 318.15 K)

k1 = A × exp(-Ea/RT1)

A = k1 / exp(-Ea/RT1)

A = (8.54 x 10⁻⁴ m⁻¹s⁻¹) / exp(-90800 J/mol / (8.314 J/mol*K * 318.15 K))

A = 6.95 x 10⁸ m⁻¹s⁻¹

Now we can use this value of A and the given Ea to calculate k2:

k2 = A × exp(-Ea/RT2)

k2 = (6.95 x 10⁸ m⁻¹s⁻¹) * exp(-90800 J/mol / (8.314 J/mol*K × 298.15 K))

k2 = 1.11 x 10⁻⁴ m⁻¹s⁻¹

Therefore, the value of k at 25°C is 1.11 x 10⁻⁴ m⁻¹s⁻¹.

Learn more about rate constant: https://brainly.com/question/14977272

#SPJ11

what intermolecualr forces are present in ch2cl2

Answers

The intermolecular forces present in [tex]CH_{2}Cl_{2}[/tex] (dichloromethane) are London dispersion forces and dipole-dipole interactions.

How to identify the type of intermolecular forces in a compound?


[tex]CH_{2}Cl_{2}[/tex] has polar bonds due to the difference in electronegativity between carbon, hydrogen, and chlorine atoms. The molecule has a tetrahedral geometry, which results in a net dipole moment, making it a polar molecule. As a result, there is an electronegativity difference between the chlorine and hydrogen atoms, leading to partial positive (δ+) and partial negative (δ-) charges on different atoms. These partial charges create dipole moments, and the molecules can interact with each other through dipole-dipole interactions. Although [tex]CH_{2}Cl_{2}[/tex] is a polar molecule with dipole-dipole interactions, it also experiences London dispersion forces due to its molecular size and electron distribution.

Since [tex]CH_{2}Cl_{2}[/tex]is a polar molecule, it will have both London dispersion forces and dipole-dipole interactions. London dispersion forces are present in all molecules, while dipole-dipole interactions occur between polar molecules.

To know more about Dipole-Dipole Interactions:

https://brainly.com/question/30420577

#SPJ11

Which pair of ions can be separated by the addition of sulfide ion? O Ca2+ and Ba2+ O Pb2+ and Ba2+ O Cu2+ and A13+ O Li+ and Fe2+

Answers

The pair of ions that can be separated by the addition of sulfide ion is Pb2+ and Ba2+.

Hi! I'd be happy to help with your question. The pair of ions that can be separated by the addition of a sulfide ion is Pb2+ and Ba2+.
Here's the step-by-step explanation:
1. When a sulfide ion (S2-) is added to a solution containing multiple ions, it selectively reacts with certain metal ions to form insoluble sulfide compounds.
2. In this case, Pb2+ reacts with S2- to form PbS (lead sulfide), which is an insoluble compound. The reaction is: Pb2+ + S2- → PbS(s).
3. Ba2+, on the other hand, does not form an insoluble compound with the sulfide ion, so it remains in solution.
4. The formation of the insoluble PbS allows the separation of Pb2+ and Ba2+ ions in the mixture.

learn more about ion here

https://brainly.com/question/29183072

SPJ11

Other Questions
Explain what role does capitalism and patriarchy play in American beauty? What imagesprojected in today's media are a result of gender inequality, what message do the imagessend to young people? Explain in at least two paragraphs. Let f(x) = 4(1/4) ^x+2 What is f(1)? Answer in fraction form. Provide your answer below: f(1) = __ (a) You are given the point (1, /2) in polar coordinates. (i) Find another pair of polar coordinates for this point such that r > 0 and 2 < < 4. (ii) Find another pair of polar coordinates for this point such that r < 0 and 0 < < 2 (b) You are given the point (-2, /4) in polar coordinates. (i) Find another pair of polar coordinates for this point such that r > 0 and 2 < < 4. (ii) Find another pair of polar coordinates for this point such that r < 0 and-2x < < 0. r2 (c) You are given the point (3,2) in polar coordinates. (i) Find another pair of polar coordinates for this point such that r > 0 and 2 < < 4T. (ii) Find another pair of polar coordinates for this point such that r < 0 and 0 < 2. If the answer to your calculation has units of kgm2/s, what type of quantity could it be? E. linear momentum A. workB. powerC. fore D angular momentum I need help with this please, ive been stuck on this over a hour now. Which country was among the top Asia Pacific offshore locations for outsourcing in 2019?a. North Koreab. Indiac. Nepald. Japan in the reaction MnO2 + 4HCl -> MnCl2 + 2H2O + Cl[a] name the substance oxidised[b] name the oxidising agent[c] name the substance reduced[d] name the reducing agent A: Calculate the concentrations of H2SO3 and HSO3 in a 0.470 MM solution of H2SO3 (Ka1=1.610^2 and Ka2=6.410^8.)B: Calculate the concentrations of SO32 H3O+, and OH in a 0.470 MM solution of H2SO3 (Ka1=1.610^2 and Ka2=6.410^8.) Select the option that correctly joins the pair of sentences. The detective doubted the witness's testimony. He decided to conduct a more thorough investigation into the crime. Since the detective doubted the witness's testimony, he decided to conduct a more thorough investigation into the crime. Since the detective doubted the witness's testimony he decided to conduct a more thorough investigation into the crime. Since the detective doubted the witness's testimony; he decided to conduct a more thorough investigation into the crime. Since, the detective doubted the witness's testimony he decided to conduct a more thorough investigation into the crime. Find N such that x+N=5.4 and x/n=5.4 are equivalent equations suppose x and y are independent random variables with expected values e[x] = 0, e[y] = 0, and var(x) = 1, var(y) = 1. what is var(x-y)? draw the expected major kinetic product formed from addition of one mole of to the following diene. Is there a common element that ties the success of development during the Asian Miracle to the severity of the Asian Financial Crisis?Were there aspects of the development policies that included built-in problems which were certain to create economic problems at a later date or were the events completely independent? Explain WHY or WHY NOT.What sorts of lessons, if any, do you think can be derived from the Asian experience (miracle, crisis, and post-crisis)?If not, why aren't the Asian economies appropriate models of development and why can't we learn from the crisis? Explain. in an integrated circuit, the current density in a 2.7-m-thick 77-m-wide gold film is 8.0105 a/m2 .How much charge flows through the film in 15 min? Job is convinced that if he could only have the opportunity to present his case to God, then God would realize he is judging the wrong man, and Job would be proclaimed innocent.true/false measured with the point-slope method, the price elasticity of demand for the demand curve p = 20 2q, when p = 19 is Indicate by choosing the correct option whether the following statement is true or false: At the end of the financial year, the loss calculated in the profit or loss account in the general ledger is to transferred to the capital account by debiting the profit or loss account and crediting the capital account. Select one: True False i suck at math and im tired of it, please help + 100 points Which entity provides a daily snapshot of bond prices for the most active issues?Multiple Choicea. SECb. FINRAc. US Treasury Departmentd. NYSEe. Federal Reserve Bank Write out the reaction and mechanism for the synthesis of phenacetin from p-acetaminophenol (acetaminophen) and bromoethane using the Williamson ether synthesis.