According to the lab manual, what step will help you "obtain better crystals"?

The first emission standards for automobiles dealt with the emission of hydrocarbons. These are organic compounds that contain only hydrogen and carbon atoms and are major components of gasoline and other fossil fuels used in vehicles. The correct alternative is d. hydrocarbons.

Here are some additional points on the other options:

Learn More About hydrocarbons

https://brainly.com/question/29318707

#SPJ11

To determine the number of moles of Cl atoms in 65.2 g CHCl₃, we first need to calculate the molar mass of CHCl3:

Molar mass of CHCl₃ = (1 x 12.01 g/mol) + (1 x 1.01 g/mol) + (3 x 35.45 g/mol)

= 119.38 g/mol

Next, we need to determine the number of moles of CHCl₃:

n = m/M = 65.2 g/119.38 g/mol = 0.5467 mol

Finally, we can calculate the number of moles of Cl atoms by multiplying the number of moles of CHCl3 by the number of Cl atoms in each molecule of CHCl₃ (which is 1):

n(Cl) = 0.5467 mol x 1 = 0.5467 mol

Therefore, there are 0.5467 moles of Cl atoms in 65.2 g CHCl₃. Rounded to three significant figures, the answer is A) 0.548 mol.

Learn more about  molar mass here:

https://brainly.com/question/22997914

#SPJ11

Benzil and benzoin are both organic compounds that contain two carbonyl groups (C=O) and are commonly used as starting materials for various organic syntheses.

However, benzil is often preferred over benzoin for certain reactions due to its higher reactivity and ease of handling.

One reason for using benzil over benzoin is that benzil is a more electrophilic compound than benzoin, meaning that it is more prone to undergo nucleophilic addition reactions. This makes benzil a better substrate for reactions such as Grignard reactions and Wittig reactions, which require the formation of a carbon-carbon bond through the addition of a nucleophile to a carbonyl group.

Another reason for using benzil is that it is a crystalline solid with a well-defined melting point, which makes it easier to handle and purify than benzoin. Benzoin, on the other hand, is a viscous liquid that can be difficult to handle and purify.

Learn more about Benzil and benzoin

https://brainly.com/question/31477517

#SPJ4

C: Percentage -268 mol, mole ratio = 1.5 and whole number = 3

H: Percentage = 4.46 mol, mole ratio = 2.5 and whole number = 5

Cl: Percentage = 1.79 mol, mole ratio = 2 and whole number = 2

Therefore, The molecular formula is C3H5Cl2, so the correct answer is (C).

To find the molecular formula for the compound, we first need to determine the empirical formula.

We can assume that we have 100 grams of the compound, so we can convert the percentages to grams:
- 32.18 g C
- 4.50 g H
- 63.32 g Cl

Next, we can convert these masses to moles by dividing by their respective atomic/molecular masses:
- Moles of C: 32.18 g / 12.01 g/mol = 2.68 mol
- Moles of H: 4.50 g / 1.01 g/mol = 4.46 mol
- Moles of Cl: 63.32 g / 35.45 g/mol = 1.78 mol

We can divide each of these mole values by the smallest mole value to get a set of whole-number ratios:
- C: 2.68 mol / 1.78 mol = 1.50
- H: 4.46 mol / 1.78 mol = 2.50
- Cl: 1.78 mol / 1.78 mol = 1.00

These ratios can be rounded to the nearest whole number to give us the empirical formula: C1.5H2.5Cl1
To find the molecular formula, we need to determine the "n" value that will give us a molecular mass close to the given molar mass of 223.94 g/mol.

The empirical formula has a mass of approximately:
- (1.5 x 12.01 g/mol) + (2.5 x 1.01 g/mol) + (1 x 35.45 g/mol) = 56.53 g/mol

To determine "n", we can divide the molar mass by the empirical formula mass:
- n = 223.94 g/mol / 56.53 g/mol = 3.96

Rounding this to the nearest whole number gives us a value of 4, so the molecular formula is:
- (C1.5H2.5Cl1)4 = C6H10Cl4

Therefore, the answer is B) C6H10Cl4.

Learn more about the mole ratio:

brainly.com/question/15288923

#SPJ11

1.945 x 10²⁴ molecules make up 3.23 moles.

In the case of sodium chloride, Sodium chloride, there are Avogadro's number of formula units for each mole of Sodium chloride (molecules). So, the number of Sodium chloride formula units (molecules) we need to determine is equal to the number of movements times all of the data we have is constant.

To convert from moles to molecules, you need to use Avogadro's number, which is 6.022 x 10²³ molecules per mole.

So, to convert 3.23 mol to molecules:

3.23 mol x 6.022 x 10²³ molecules/mol = 1.945 x 10²⁴ molecules.

To know more about molecules visit:-

https://brainly.com/question/15123235

#SPJ1

It is true that the Maximum Contaminant Level (MCL) is the highest concentration of a contaminant that is allowable in a water system. So, option(a) is right one.

The EPA has drinking water regulations for more than 90 pollutants. MCL is the maximum contaminant level allowed in drinking water. Once the MCLG is defined, the EPA sets the applicable standards. MCL is the maximum allowable pollutant level in water supplied to all public water users.

Maximum Contaminant Level (MCL), which sets a limit value for the concentration of pollutants in drinking water. The MCL for arsenic in drinking water is 10 parts per billion (ppb). So it is clear from the above discussion that the statement is true.

For more information about concentration , visit :

https://brainly.com/question/28564792

#SPJ4

The total surface area of the irregularly shaped metal part is approximately 1224.78 cm².

To determine the total surface area of the irregularly shaped metal part, we need to first find the mass of zinc deposited, then use the volume and density to find the surface area.

The amount of zinc deposited can be calculated using Faraday's Law of Electrolysis:

m = (I × t × M) / (n × F)

where m is the mass of zinc deposited, I is the current (2.599 A), t is the time (1 hour = 3600 s), M is the molar mass of zinc (65.38 g/mol), n is the number of electrons involved in the redox reaction (for Zn, n = 2), and F is the Faraday constant (96485 C/mol).

m = (2.599 A × 3600 s × 65.38 g/mol) / (2 × 96485 C/mol) = 9.833 g

Now we can find the volume of zinc deposited:

V = m / ρ = 9.833 g / 7.140 g/cm³ = 1.376 cm³

We know the thickness of the zinc layer is 0.01123 mm, which is equivalent to 0.001123 cm. To find the surface area (A), we can use the formula:

A = V / thickness = 1.376 cm³ / 0.001123 cm = 1224.78 cm²

So, the total surface area of the irregularly shaped metal part is approximately 1224.78 cm².

Visit here to learn more about  molar mass : https://brainly.com/question/12127540
#SPJ11

The underground pipe fitting connecting the inlet pipe to a fire hydrant is called the Hydrant Riser.

Fire hydrants with a variety of valves and connection points are seen in many places. In the event of a fire breakout, firefighters locate the fire hydrants, connect their hoses and then pump a large volume of pressurized water to put out the fire. A special pentagonal wrench is used to remove the valve cover of the hydrant. Then after attaching the hoses, the firefighters open the valve for the water to flow.

They usually have a connection point to hook up a fire hose and a nut or bolt to turn on which will start the flow. Every fire hydrant is essentially just an attachment to the main water line. Underneath that connects the hydrant valve through a pipe called a riser. However, normal hydrants don’t change the water pressure or flow in any way. They function as valves so firefighters can utilize the already present pressure in the water pipes. While all of this may sound simple the internal mechanics of a fire hydrant are a little more complex and can vary by region.

To know more about Hydrant  Please click:-

https://brainly.com/question/16720807

#SPJ11

The class with the highest average age is the Evening class, with a mean of 22 years. The class with the ages that are the most spread out can be determined by comparing the standard deviations.

The empirical rule of statistics asserts that 99.7% of data in a normal distribution falls within three standard deviations of the mean. In order to do this, 68% of the observed data will fall within the first standard deviation, 95% within the second deviation, and 97.5% within the third standard deviation.

With the normal distribution, 68% of the observations fall within one standard deviation of the mean, 95% fall within two standard deviations of the mean, and 99% fall within three standard deviations of the mean.

To know more about average visit:-

https://brainly.com/question/31358056

#SPJ1

Increasing the concentration of the substrate can also increase the rate of carbocation formation and subsequently the rate of the Sn1 reaction.

To help carbocation formation and increase the rate of an Sn1 reaction, consider the following factors:
1. Substrate structure: More substituted carbocations (3° > 2° > 1°) are more stable, and their formation is favored. This stability increases the rate of an Sn1 reaction.
2. Leaving group: A good leaving group (one that is stable when it departs) increases the likelihood of carbocation formation and the rate of an Sn1 reaction.
3. Solvent: Polar protic solvents stabilize carbocations through solvation, which can help in carbocation formation and increase the Sn1 reaction rate.
4. Temperature: Increasing temperature can help overcome the energy barrier for carbocation formation, resulting in a faster Sn1 reaction rate.
By optimizing these factors, you can promote carbocation formation and increase the rate of an Sn1 reaction.

learn more about carbocation Refer: https://brainly.com/question/31538109

#SPJ11

The two conditions to consider when deciding if a chemical reaction is spontaneous are: Enthalpy (ΔH): This is the measure of the heat energy that is released or absorbed during a chemical reaction.

A negative value of enthalpy (ΔH < 0) indicates that the reaction releases heat energy and is exothermic, while a positive value of enthalpy (ΔH > 0) indicates that the reaction absorbs heat energy and is endothermic. A spontaneous reaction typically involves a decrease in enthalpy (ΔH < 0), as this means that the reaction releases heat energy and becomes more stable.

Entropy (ΔS): This is the measure of the disorder or randomness of a system. A positive value of entropy (ΔS > 0) indicates that the system becomes more disordered or random, while a negative value of entropy (ΔS < 0) indicates that the system becomes more ordered or less random. A spontaneous reaction typically involves an increase in entropy (ΔS > 0), as this means that the reaction becomes more disordered and more favorable from a thermodynamic perspective.

Together, the two conditions of enthalpy and entropy are summarized by the Gibbs free energy (ΔG), which is the measure of the overall spontaneity of a reaction. If ΔG is negative, the reaction is spontaneous, while if ΔG is positive, the reaction is non-spontaneous.

To know more about Enthalpy

brainly.com/question/16720480

#SPJ11

There are 12.00 grams of Al(NO₃)₃ in 0.089 L of a 0.63 M solution of Al(NO₃)₃.

The number of moles is a unit used to measure the amount of a substance, defined as the amount of a substance that contains as many elementary entities (such as atoms, molecules, or ions) as there are atoms in 12 grams of carbon-12. One mole of a substance contains Avogadro's number of entities, which is approximately 6.022 × 10^23 particles.

The number of moles can be calculated by dividing the mass of a substance by its molar mass or by dividing the amount of substance (in units of molecules, atoms or ions) by Avogadro's number.

To calculate the amount of Al(NO₃)₃ in grams present in 0.089 L of a 0.63 M solution of Al(NO₃)₃, we can use the formula:

mass = molarity × volume × molar mass

where:

molarity is the concentration of the solution in moles per liter (M)

volume is the volume of the solution in liters (L)

molar mass is the mass of one mole of the compound in grams per mole (g/mol)

First, let's calculate the number of moles of Al(NO₃)₃ present in 0.089 L of the solution:

moles = molarity × volume = 0.63 M × 0.089 L = 0.05607 mol

The molar mass of Al(NO₃)₃ is:

Al(NO₃)₃ = Al + 3(NO₃) = 1(26.98 g/mol) + 3(63.01 g/mol) = 213.97 g/mol

Now we can use the formula to calculate the mass of Al(NO₃)₃:

mass = moles × molar mass = 0.05607 mol × 213.97 g/mol = 12.00 g

Therefore, there are 12.00 grams of Al(NO₃)₃ in 0.089 L of a 0.63 M solution of Al(NO₃)₃.

Learn more about moles here:

https://brainly.com/question/26416088

#SPJ1

Assuming the solution of ascorbic acid and vinegar have the same pH, I would predict that ascorbic acid would be more effective in preventing browning.

The reason for this is because ascorbic acid, also known as vitamin C, is an antioxidant that can directly react with the compounds responsible for browning (such as polyphenols) and neutralize them, thereby preventing the browning process. While vinegar is an acid that can help lower the pH of the solution, making it less favorable for browning reactions to occur, it does not have the same antioxidant properties as ascorbic acid, which allows it to directly inhibit the browning process.

Learn more about ascorbic acid here:

brainly.com/question/15297660

#SPJ11

we have 0.755 mol of O atoms in 25.7 g of CaSO₄. The correct answer is option B) 0.755 mol.

To determine the number of moles of O atoms in 25.7 g of CaSO₄, we need to first find the molar mass of CaSO₄ and then use the given mass to calculate the moles of the compound. Finally, we will find the moles of O atoms within the compound.
The molar mass of CaSO₄ can be found by adding the molar masses of its constituent elements: Ca, S, and O. The molar masses are as follows:
Ca = 40.08 g/mol
S = 32.07 g/mol
O = 16.00 g/mol
The formula of CaSO₄ contains one Ca atom, one S atom, and four O atoms. Therefore, the molar mass of CaSO₄ is:
(1 × 40.08) + (1 × 32.07) + (4 × 16.00) = 40.08 + 32.07 + 64.00 = 136.15 g/mol
Now we can find the moles of CaSO₄ in 25.7 g:
moles of CaSO₄ = (mass of CaSO₄) / (molar mass of CaSO₄) = 25.7 g / 136.15 g/mol = 0.1887 mol
Since there are 4 moles of O atoms in each mole of CaSO₄, we can now calculate the moles of O atoms:
moles of O atoms = (moles of CaSO₄) × (4 moles of O atoms per mole of CaSO₄) = 0.1887 mol × 4 = 0.7548 mol
Rounded to three significant figures, we have 0.755 mol of O atoms in 25.7 g of CaSO₄. The correct answer is option B) 0.755 mol.

learn more about atoms here

https://brainly.com/question/30898688

#SPJ11

The amount of heat in joules needed to heat up 57.1 grams of ice at 0 Celsius to 66 Celsius is 34857 J.

To calculate the amount of heat in joules needed to heat up 57.1 grams of ice at 0 Celsius to 66 Celsius, we can use the following formula:

q = m x c x ΔT

Where:
q = amount of heat (in joules)
m = mass of the substance (in grams)
c = specific heat capacity of the substance (in J/g°C)
ΔT = change in temperature (in °C)

First, we need to calculate the amount of heat needed to melt the ice:

q1 = m x ΔHf

Where:
ΔHf = heat of fusion of ice (334 J/g)

q1 = 57.1 g x 334 J/g = 19039.4 J

Next, we need to calculate the amount of heat needed to raise the temperature of the water from 0°C to 66°C:

q2 = m x c x ΔT

Where:
c = specific heat capacity of water (4.184 J/g°C)

ΔT = 66°C - 0°C = 66°C

q2 = 57.1 g x 4.184 J/g°C x 66°C = 15817.6 J

Finally, we add the two amounts of heat together to get the total amount of heat needed:

q = q1 + q2
q = 19039.4 J + 15817.6 J
q = 34857 J

To learn more about water  click here

brainly.com/question/28465561

#SPJ11

The false statement is: the rate laws of all chemical reactions can be determined directly from their net chemical equations.

This is because not all chemical reactions follow a simple stoichiometry and may involve multiple intermediate steps and complex mechanisms. However, elementary reaction rate laws can be determined directly from their chemical equations, and the rate laws of termolecular elementary reactions are third order overall, while the rate laws of unimolecular elementary reactions are first order overall.

The false statement among the given options is: The rate laws of all chemical reactions can be determined directly from their net chemical equations. This is because the rate law is determined experimentally and cannot be derived solely from the net chemical equation. The other statements regarding elementary reaction rate laws and order for termolecular and unimolecular reactions are true.

To know more about chemical click here

brainly.com/question/25931113

#SPJ11

Explanation:

In a chemical reaction, the rates at which reactants are converted into products depend on various factors, including temperature, pressure, and concentration of the reactants. When the concentrations of reactants and products remain constant in a system, it typically indicates that the forward and reverse reaction rates are equal, resulting in a state of chemical equilibrium.

At equilibrium, the concentrations of reactants and products do not change over time, because the rates of the forward and reverse reactions are balanced. This occurs when the rate of the forward reaction, which converts reactants into products, is equal to the rate of the reverse reaction, which converts products back into reactants. As a result, the concentrations of both reactants and products remain constant.

The concept of Le Chatelier's principle can help explain why concentrations of reactants and products remain constant at equilibrium. According to Le Chatelier's principle, when a system at equilibrium is subjected to a change in temperature, pressure, or concentration, the system will adjust in a way that opposes the change. For example, if the concentration of a reactant is increased, the system will shift towards the side with fewer moles of reactant in order to restore the equilibrium. Similarly, if the concentration of a product is increased, the system will shift towards the side with fewer moles of product.

As a result of these shifts, the rates of the forward and reverse reactions will be adjusted to restore equilibrium, and the concentrations of reactants and products will remain constant. If the concentration of a reactant or product decreases, the system will shift in the opposite direction to restore equilibrium. This dynamic balancing of the forward and reverse reaction rates is what allows the concentrations of reactants and products to remain constant at equilibrium in a closed system.

When collecting bacteriological samples that have been chlorinated, sodium thiosulfate is used to dechlorinate the water. Thus, option (b) is the correct answer.

Chlorination is the process of the addition of Chlorine in water to destroy parasites, viruses, and bacteria present in the water that might cause illness and disease.

Dechlorination is the process of removal of chlorine from disinfected water before discharging it into the environment. This is done in order to remove the odor of chlorine and to make water more suitable for introduction into the environment. This is done by dechlorinating agents such as sulfur dioxide, sodium thiosulfate, etc.

Learn more about Chlorination:

https://brainly.com/question/29763938

#SPJ4

B. insufficient bonding strength.

Hydrated lime is often added to mortar mixes to improve bonding strength between the bricks or stones being used. Without hydrated lime, the mortar may not bond well to the building materials, resulting in a weaker overall structure. While the absence of hydrated lime may slightly increase the strength and workability of the mortar, it is not worth sacrificing bonding strength.

The mortar may also have little resistance to moisture penetration without the addition of hydrated lime. Insufficient water retention may also be a possibility, but it is not as significant a concern as inadequate bonding strength.

To know more about portland cement, click here:-

https://brainly.com/question/30184879

#SPJ11

Sodium hypochlorite (NaOCL) solution is available with 5 to 20% available chlorine. The correct answer is option b.

Sodium hypochlorite (NaOCL) solution is a commonly used disinfectant in various industries, including healthcare, food processing, and water treatment. The available chlorine concentration in the solution is an important parameter that determines its efficacy as a disinfectant. The answer to the question is (b) 5 to 20% available chlorine.

Sodium hypochlorite solutions with lower available chlorine concentrations (2 to 5%) are typically used for household cleaning and disinfection, while solutions with higher concentrations (50 to 70%) are used for industrial applications, such as water treatment. Solutions with 5 to 20% available chlorine are commonly used for disinfection in healthcare settings, such as hospitals and clinics.

It is important to note that the concentration of sodium hypochlorite solutions can vary between different brands and products. It is crucial to follow the manufacturer's instructions for dilution and use to ensure proper disinfection and safety. Also, it is important to handle sodium hypochlorite solutions with caution, as they can be corrosive and harmful to skin and eyes.

Therefore, option b is correct.

For more such questions on Sodium hypochlorite, click on:

https://brainly.com/question/31542091

#SPJ11

Based on the information provided, it seems that a chemical reaction occurred at time t1 that involved the gases SO3 and O2. The change in partial pressure of these gases indicates that a shift occurred in the equilibrium of the reaction.

One possible explanation for the increase in partial pressure of SO3 is that the reaction was exothermic and favored the production of SO3 at the temperature and pressure conditions present. As the reaction proceeded, more SO3 was formed and the partial pressure increased.  At the same time, the decrease in partial pressure of O2 suggests that it was consumed in the reaction to form SO3. This decrease could occur if the reaction was consuming O2 faster than it was being supplied, or if the equilibrium of the reaction favored the consumption of O2 over the production of SO3.

Overall, the change in partial pressures indicates that the chemical reaction caused a shift in the equilibrium of the system towards the production of SO3.

To know more about partial pressures, click here:-

https://brainly.com/question/31214700

#SPJ11

The correct answer is E) 162.23 amu. The molecular mass of nicotine, [tex]C_{10} H_{14} N_{2}[/tex] can be calculated by adding the atomic masses of all its constituent atoms:

(10 x atomic mass of C) + (14 x atomic mass of H) + (2 x atomic mass of N)

= (10 x 12.011) + (14 x 1.008) + (2 x 14.007)

= 162.23 amu

The molecular mass of a compound is the sum of the atomic masses of all the atoms in a molecule. In the case of nicotine, its molecular mass is calculated by adding the atomic masses of each of its atoms, which are as follows:

10 carbon atoms: 10 x 12.01 amu = 120.1 amu

14 hydrogen atoms: 14 x 1.01 amu = 14.14 amu

2 nitrogen atoms: 2 x 14.01 amu = 28.02 amu

Therefore, the molecular mass of nicotine ([tex]C_{10} H_{14} N_{2}[/tex]) is:

Molecular mass = 120.1 amu + 14.14 amu + 28.02 amu = 162.26 amu (rounded to two decimal places)

To know more about atoms

brainly.com/question/1566330

#SPJ11

The three-dimensional area that the closed surface encloses is known as the volume. Mass divided by volume equals density. Density and volume have a clear inverse relationship. In other words, any change in volume will cause a change in density, and vice versa.

The change in y split by the change in x is the formula for a straight line's slope. Slope is equal to the mass divided by volume since the x and y axes are both equal to mass and volume, respectively. As a result, density is equal to the slope of a mass vs volume graph.

Density=Mass/Volume is a common formula used to describe the mathematical connection between mass and density.

learn more about mass and density

https://brainly.com/question/1354972

#SPJ1

The half life for a first order reaction is 27 min. For 4 half lives to occur it will take 108 mins. The correct option is (b)

The order of reaction describes  the relationship between the rate of a chemical reaction and the concentration of all the species participating in the reaction.  Reaction order gives information about the number of reacting species whose concentration affects the reaction rate. It is obtained by adding all the exponents of the concentration in the rate equation. The value of order of a reaction can beany  integer or a fraction. It can also have a value  zero.

Half life of a reaction is defined as the time required for completion of half of the reaction or 50% of the reaction. The expression for half life of a second order reaction is 0.693/k

According to question, for 1 half life it takes 27 mins

So, for 4 half life it will take 27× 4= 108 mins.

Thus, option (b) is correct.

To know more about half life here

https://brainly.com/question/19369788

#SPJ4

The term for the minimum amount of energy required to remove an electron from a neutral atom in the gaseous state is called ionization energy.

Ionization energy is an essential concept in chemistry and is often used to compare and contrast elements based on their reactivity. In general, ionization energy increases from left to right across a period and decreases from top to bottom within a group in the periodic table. This trend occurs because the nuclear charge and electron shielding play a significant role in determining the ease of removing an electron from an atom. Elements with high ionization energies, such as noble gases, are less reactive, while elements with low ionization energies, like alkali metals, are more reactive.

Learn more about ionization energy at https://brainly.com/question/30831422

#SPJ11

To find the mass of 3.00 moles of ethanol, we can use the formula: mass = moles x molar mass mass = 3.00 moles x 46.07 g/mol mass = 138.21 g Therefore, the answer is B) 138 g.

To find the mass of 3.00 moles of ethanol (C2H6O), you need to first calculate the molar mass of ethanol and then multiply it by the given number of moles.

Step 1: Determine the molar mass of ethanol (C2H6O).
- Carbon (C): 12.01 g/mol
- Hydrogen (H): 1.01 g/mol
- Oxygen (O): 16.00 g/mol

Ethanol (C2H6O) has 2 carbon atoms, 6 hydrogen atoms, and 1 oxygen atom:
(2 × 12.01 g/mol) + (6 × 1.01 g/mol) + (1 × 16.00 g/mol) = 24.02 + 6.06 + 16.00 = 46.08 g/mol

Step 2: Multiply the molar mass by the given number of moles:
3.00 moles × 46.08 g/mol = 138.24 g

The mass of 3.00 moles of ethanol is approximately 138 g, so the correct answer is B) 138 g.

to learn more about molar mass click here:

brainly.com/question/19755698

#SPJ11

HTH dry powder chlorine is set at 65% purity. So, the correct answer is c.) 65%.

To maintain your pool clean, clear, and prepared for summertime enjoyment, it sanitises, manages algae, clarifies, softens pool water, even prevents stain and scale. sanitizer and shock therapy combined. eliminates algae and germs. softens, clarifies, and guards against scale and stains. Water that is clearly flashing blue in 24 hours. HTH is a potent chlorinating agent with a chlorine concentration of more than 30%. This substance is frequently used to disinfect swimming pools. Hence, HTH dry powder chlorine is set at 65% purity. So, the correct answer is c.) 65%.

To know more about chlorine click here:

https://brainly.com/question/13123721

#SPJ11

Out of the options given, vinegar would be the best solution to dissolve hard water deposits around your bathroom sink. This is because vinegar is a mild acid that can break down the calcium carbonate without damaging the surface of the sink.

Bleach and ammonia are not recommended as they are harsh chemicals that can damage the sink and emit toxic fumes if mixed with other cleaning products. Lye, although effective, is a strong alkali that can cause chemical burns and should be handled with extreme caution.

To use vinegar, mix equal parts of vinegar and water and apply it to the affected areas. Let it sit for a few minutes before scrubbing the area with a soft-bristled brush or cloth. Rinse with water and repeat the process if necessary.

It's important to note that prevention is key when it comes to hard water deposits. Regularly cleaning your bathroom sink with a mild cleaner and wiping it dry after use can help prevent the buildup of calcium carbonate.

learn more about hard water deposits  here: brainly.com/question/14424069

#SPJ11

Methyl orange is the least desirable residual test for chlorine. Hence, option b is correct.

Methyl orange is a titration indicator dye that changes color when an acid or base is present. Due to the existence of additional oxidizing agents or pollutants that could react with the indicator, the test is not specific for detecting chlorine residue and may produce erroneous findings.

SNORT, OTA, and DPD are more accurate and trustworthy ways to measure chlorine residual in water than the other residual assays. OTA is a colorimetric method that measures total chlorine residual, SNORT is a visual indicator that changes color in the presence of chlorine, and DPD is a frequently used test that evaluates free and mixed chlorine residual.

To know more about residual test, visit,

https://brainly.com/question/16936855

#SPJ4

To make a single molecule of glucose, 6 molecules of carbon dioxide must be added to RuBP (Ribulose-1,5-bisphosphate) during the process of photosynthesis.

The process of forming glucose in the chloroplast during photosynthesis is called the Calvin cycle. Ribulose-1,5-bisphosphate RuBP, is a five carboned ring, carbon dioxide is added to it to make a glucose molecule at the end of the photosynthesis.

These molecules are subsequently transformed into glucose through a series of further processes. Six molecules of carbon dioxide must be fixed to RuBP by the Calvin cycle in order to produce 12 molecules of 3-phosphoglycerate, which are then transformed into two molecules of glucose.

To know more about Glucose in photosynthesis, visit,

https://brainly.com/question/823571

#SPJ4