Answer:
reduces
Explanation:
According to Boyle's law, when the pressure of a gas increases at constant temperature the volume reduces.
Boyle's law states that "the volume of fixed mass of a gas is inversely proportional to the change in pressure if the temperature is constant".
It suggests that at constant temperature, if pressure increases, temperature reduces.Mathematically, it is expressed as;
P1 V1 = P2 V2
P and V are pressures
1 and 2 are initial and finals state.
Boyle's law is stated for the ideal gas at a constant temperature. According to Boyle's law, with an increase in pressure, the volume of the gas decreases.
What is an ideal gas?The ideal gas is given as the gas in which the interatomic collisions are zero, and the changes are produced with the collisions to the walls.
Boyle's law is stated as the gas is at a constant temperature. According to the ideal gas, the pressure and volume are inversely related.
With the increase in pressure, the volume of the gas decreases and vice versa.
Learn more about Boyle's law, here:
https://brainly.com/question/1437490
When elements combine to form a mixture, the resulting chemical properties may be very different from those of the elements that make it. true or false
Answer:
True
Explanation:
If a liquid is said to have high viscosity it is...
Answer:
Viscosity is the measure of resistance of a fluid to flow. A fluid that is highly viscous has a high resistance (like having more friction) and flows slower than a low-viscosity fluid. To think of viscosity in everyday terms, the easier a fluid moves, the lower the viscosity
Explanation:
WILL GET BRAINLIEST AND LOTS OF POINTS IF YOU ANSWER CORRECTLY W EVIDENCE (QUESTION IN PIC BELOW)
Answer:
element,compound
Explanation:
im petty sure this is the anwser
Answer: D
Explanation:
Ava threw a hamster at her sister the other day she used 12N of force to accelerate the hamster at 8m/s2.what was the mass of the poor hamster?SHOW ALL WORK
We are given:
The force applied on the poor hamster (F) = 12 N
Acceleration of the poor Hamster (a) = 8 m/s²
Solving for the mass of the Poor Hamster:
From newton's second equation of motion, we know that:
F = ma
replacing the given values
12 = 8 * m
m = 12/8 kg
m = 3/2 kg
The poor Hamster weighs 3/2 kg
What occurs during a solar elcipse
Answer:
the moon gets infront of the sun
Answer:
A solar eclipse happens when the moon moves in front of the Sun as seen from a location on Earth. During a solar eclipse, it gets dimer and dimmer outside as more and more of the Sun is covered by the Moon. During a total eclipse, the entire Sun is covered for a few minutes and it becomes very dark outside. The temperature outside also drops.
What is the wavelength of a photon that has 4.42 x 10^8 of energy?
Answer:
λ = 4.5×10⁻³⁴ m
Explanation:
Given data:
Energy of photon = 4.42×10⁸ J
Wavelength of photon = ?
Solution:
Formula:
E = hc/λ
speed of light = c = 3×10⁸ m/s
planck's constant = h = 6.63×10⁻³⁴ Js
Now we will put the values in formula.
4.42×10⁸ J = 6.63×10⁻³⁴ Js × 3×10⁸ m/s / λ
λ = 6.63×10⁻³⁴ Js × 3×10⁸ m/s / 4.42×10⁸ J
λ = 19.89×10⁻²⁶ Jm / 4.42×10⁸ J
λ = 4.5×10⁻³⁴ m
Name the two ways by which
suspended impurities present
in water can be removed
Answer:
Common water treatment processes such as flocculation, sedimentation, filtration and disinfection are employed to remove general impurities such as floating and suspended matters, colloidal particles, dissolved organic matter and destruction of disease-causing microorganisms (pathogens).
Explanation:
Acetylene gas (C2H2) is used in welding torches. When it reacts with oxygen, it produces
carbon dioxide (CO2) and steam (H20). The reaction can be described by the equation 2C2H2+
502 —> 4CO2 + 2H20. How much mass of C2H2 is needed to produce 75.0 grams of CO2?
Mass C₂H₂ needed : 22.165 g
Further explanationReaction
2C₂H₂+ 5O₂ ⇒ 4CO₂ + 2H₂O
75.0 grams of CO₂ , mol CO₂ (MW=44 g/mol) :
[tex]\tt \dfrac{75}{44}=1.705[/tex]
mol C₂H₂ :
[tex]\tt \dfrac{2}{4}\times 1.705=0.8525[/tex]
mass C₂H₂ (MW=26 g/mol) :
[tex]\tt 0.8525\times 26=22.165~g[/tex]
Question 23 of 25
Which of these is a disadvantage of using natural gas?
A. It is not considered safe to use in homes.
B. It burns less cleanly than other fossil fuels.
C. Scientists have developed new ways of extracting it.
D. Extraction through fracking can contaminate groundwater.
SUBMIT
Answer:
the answer is D. extraction through fracking can contaminate groundwater
The disadvantage of natural gas has been the contaminating groundwater due to fracking. Thus, option D is correct.
Natural gas has been the stored fossil energy that has been found buried deep inside the earth. The gas has consisted of a varying quantity of compounds with a maximum proportion of methane.
Natural gas has been nonrenewable, causing pollution with the burning. The release of greenhouse gases with the burning of natural gas results in affecting the environment.
Although there has been the presence of various extraction methods, natural gas results in contaminating groundwater due to fracking. Thus, option D is correct.
For more information about natural gas, refer to the link:
https://brainly.com/question/351648
An electrochemical cell is composed of pure nickel and pure iron electrodes immersed in solutions of their divalent ions at room temperature (25°C). If the concentrations of Ni2+ and Fe2+ ions are 0.002 M and 0.40 M, respectively, what voltage is generated at 25°C? (The respective standard reduction potentials for Ni and Fe are −0.250 V and −0.440 V.)
Answer:
0.758 V.
Explanation:
Hello!
In this case, case when we include the effect of concentration on an electrochemical cell, we need to consider the Nerst equation at 25 °C:
[tex]E=E\°-\frac{0.0591}{n} log(Q)[/tex]
Whereas n stands for the number of moles of transferred electrons and Q the reaction quotient relating the concentration of the oxidized species over the concentration of the reduced species. In such a way, we can write the undergoing half-reactions in the cell, considering the iron's one is reversed because it has the most positive standard potential so it tends to reduction:
[tex]Fe^{2+}+2e^-\rightarrow Fe^0\ \ \ E\°=0.440V\\\\Ni^0\rightarrow Ni^{2+}+2e^-\ \ \ E\°=-0.250V[/tex]
It means that the concentration of the oxidized species is 0.002 M (that of nickel), that of the reduced species is 0.40 M and there are two moles of transferred electrons; therefore, the generated potential turns out:
[tex]E=(0.440V+0.250V)-\frac{0.0591}{2} log(\frac{0.002M}{0.40M} )\\\\E=0.758V[/tex]
Beat regards!
What would change oxygen into another isotope
Answer:
Adding Neutrons
General Formulas and Concepts:
Chemistry - Atomic Structure
Atoms CompositionNucleus - Protons, NeutronsElectronsExplanation:
We know that adding Protons to any atom will change its chemical properties and make it a different element.
We also know that adding Electrons to any atom will simply only change its overall charge.
Isotopes are formed by adding neutrons to the nucleus. It will be the same element but it would have a different mass and amount of neutrons.
Explain how electron microscopes work and why some scientists might prefer to use electron microscopes instead of light microscopes.
Answer:
Electron microscopes differ from light microscopes in that they produce an image of a specimen by using a beam of electrons rather than a beam of light. Electrons have much a shorter wavelength than visible light, and this allows electron microscopes to produce higher-resolution images than standard light microscopes.
Explanation:
Help please! please answer with a good answer
Answer:
what the heck what is that?
Explanation:
How many atoms of fluorine are in 5.6x10^22 molecules of MgF2.
Answer:
1.12 x 10²³atoms of F
Explanation:
Number of MgF₂ atoms = 5.6 x 10²² molecules;
The unknown here is the number of Fluorine atoms found in the compound.
In MgF₂,
1 mole of MgF₂ contains 2 moles of F;
From the given number of molecules we can also say that, MgF₂ contains 5.6 x 10²²atoms;
1 mole of MgF₂ contains 2 moles of F;
5.6 x 10²²atoms of MgF₂ will contain 2 x 5.6 x 10²² = 1.12 x 10²³atoms of F
The number of atoms of Flourine found in 5.6x10^/²² molecules of MgF2 is; 1.12 x 10²³atoms of F
Number of MgF₂ atoms as given = 5.6 x 10²² molecules;
We are required to determine the number of Fluorine atoms found in the compound.
In MgF₂,
1 mole of MgF₂ contains 2 moles of F;As given, MgF₂ contains 5.6 x 10²²atoms;
1 mole of MgF₂ contains 2 moles of F;Hence, 5.6 x 10²²atoms of MgF₂ will contain 2 x 5.6 x 10²² = 1.12 x 10²³atoms of Flourine.
Read more on stoichiometry:
https://brainly.com/question/8062886
1.
Examine the molecule SF4 in the Real Molecules screen to check your prediction from
question c. Which interactions are more important in determining where the lone pair
will go?
Answer:
See explanation
Explanation:
In SF4, the lone pair is placed at an equatorial position. One needs to consider the A-B interactions (axial-equatorial) as well as the B-B (equatorial-equatorial) interactions.
The lone pair occupies an equatorial site to minimize repulsion and maximize the space between electron pairs. Remember that equatorial bonds(Xeq-E-Xeq) are at an angle of 120 degrees while axial bonds(Xax-E-Xeq) lie at an angle of 90 degrees.
It should be noted that in the molecule SF4, the lone pair is placed at an equatorial position.
From the complete question, it's important to consider the axial-equatorial interactions as well as the equatorial-equatorial which is the B-B interactions.
Furthermore, the lone pair occupies an equatorial site that is vital in minimizing repulsion as well as maximizing the space that's between the electron pairs.
In conclusion, the lone pair is placed at an equatorial position.
Read related link on:
https://brainly.com/question/15218635
A 0.4505 g sample of a pure soluble bromide compound is dissolved in water, and all of the bromide ion is precipitated as AgBr by the addition of an excess of silver nitrate. The mass of the resulting AgBr is found to be 0.7514 g. What is the mass percentage of bromine in the original compound
Answer:
70.98% is the mass percentage of bromine in the original compound
Explanation:
First, we need to convert mass of AgBr to moles with its molar mass (AgBr: 187.77g/mol). Moles of AgBr = Moles of Br. With molar mass of Br-: 79.904g/mol we can find mass of bromide and mass percentage as follows:
0.7514g AgBr * (1mol / 187.77g) = 0.00400 moles AgBr = Moles of Br-
0.00400 moles Br- * (79.904g / mol) = 0.320g Br- in the sample
Mass percentage is:
0.320g Br- / 0.4505g sample * 100
70.98% is the mass percentage of bromine in the original compoundSodium sulfate solution contains sodium lons, Na+, sulfate ions, (SO4)2-, hydrogen ions, H+, and hydroxide ions, OH-.
When sodium sulfate is electrolyzed, hydrogen is produced at one electrode and oxygen is produced at the other electrode.
Explain how these products are formed from the ions in the electrolysis process, indicating how you would identify the products.
(6 marks)
Water is oxidized and reduced at both electrodes
Further explanationElectrolysis utilizes electrical energy to carry out non-spontaneous redox reactions. The ions in the solution flowed by an electric current will move toward the electrode opposite the charge.
The negative ions from the solution will move towards the positive electrode, and release electrons around the positive electrode (oxidation occurs) and electrons flow to the negative pole
While around the negative electrode electron binding occurs and a reduction reaction occurs
the reaction at the cathode:
1. the reduced active metal is water, other than that the metal will be reduced
2. H⁺ of the acid will be reduced
For reactions in anode:
1. if the electrodes are not inert then the metal is oxidized
2. If inert then:
a. OH⁻ from the base will be oxidized
b. The halogen metal will oxidize
Na⁺ (cathode)⇒metal group 1 and 2 ⇒ H₂O reduced2H₂O(l)+2e⁻⇒ H₂(g)+2OH⁻(aq)
SO₄²⁻ (anode)⇒acid ion(oxyacid)⇒H₂O oxidized2H₂O(l)⇒4H⁺(aq)+O₂(g)+4e⁻
The naturally occurring isotopes of potassium are potassium-39, potassium-40, and potassium-41. Potassium-39 has an abundance of 93.258% and a mass of 38.964 amu. Potassium-40 has an abundance of 0.011710% and a mass of 39.964 amu. Potassium-41 has an abundance of 6.7302% and a mass of 40.962 amu. Calculate the average atomic mass of potassium
Answer:
39.099 amu
Explanation:
saw this on quizlet no cap sorry im 3 weeks late
What is the Molarity of 25 g of C6H12O6 in 25 mL of H2O?
Answer:
5.6 M
Explanation:
Given data:
Mass of C₆H₁₂O₆ = 25 g
Volume of solution = 25 mL (25 mL×1 L/1000 mL=0.025 L)
Molarity of solution = ?
Solution:
Molarity is used to describe the concentration of solution. It tells how many moles are dissolve in per litter of solution.
Formula:
Molarity = number of moles of solute / L of solution
Number of moles of C₆H₁₂O₆:
Number of moles = mass/molar mass
Number of moles = 25 g/ 180.16 g/mol
Number of moles = 0.14 mol
Molarity:
M = number of moles / volume in L
M = 0.14 mol/ 0.025 L
M = 5.6 M
Answering the following questions will help you focus on the outcomes of the experiments. Experiment 1: What happens to the water in the small tube as the water in the test tube absorbs heat? Why do you think a small tube was used to observe the expansion of water? Experiment 2: Compare the circumference of the balloon before and after freezing. What is the percent increase in this measurement? Combined Results Write a summary paragraph discussing this experiment and the results. Use the following questions and topics to help guide the content of your paragraph. Summarize the conclusions that you can draw from this experiment. Use the questions above to guide your ideas. Summarize any difficulties or problems you had in performing the experiment that might have affected the results. Describe how you might change the procedure to avoid these problems. Describe at least two real-world issues or examples that illustrate the findings of this experiment.
Answer:
Use a glass testtube
Insert a 1-hole stopper in which you insert a glass tube (use a bit of glycerine around the bottom end which makes it slip easier into the stopper)
Fill the testtube with colored water
Place rubber stopper
Make sure there are no air bubbles and that the column in the glass tube is low, as indicated
Place testtube assembly into water which you will heat (hot plate)
Observations
You will observe that the water column in the glass tube moves up as the temperature of the water in the testtube increases. With a 20 mL testtube, and a temperature change from 20 degrees C to 80 degrees C, you should get something like 15-20 cm of change in height.
What do YOU observe?
How do YOU explain your observation?
What is happening there?
Explanation
The water in the testtube expands as it is heated. There is only one direction to expand in, the glass tube. This glass tube is narrow so that a small change in volume will result in a considerable change in height; your signal is amplified.
This is the same phenomenon as in thermometers with a glass bulb on the lower end. Thermometers use a variety of liquids including alcohol (expands more than water) and mercury (is dangerous when spilled).
Explanation:
hope this helps
Answer:
Experiment 1:
What happens to the water in the small tube as the water in the test tube absorbs heat?
Answer: As the water in the test tube absorbs heat the water in the small tube continues to rise
Why do you think a small tube was used to observe the expansion of water?
Answer: The small tube was used to observe the expansion of water to show a visible change that could also be measure with a ruler
Experiment 2:
Compare the circumference of the balloon before and after freezing. What is the percent increase in this measurement?
Answer: The circumference of the balloon increased after it was put in the freezer. The measurement increased by about 5%, it started at 39.5cm then increased to 41.5cm
According to the data, an increase in temperature caused the water molecules to expand because it gained energy which caused it to move more rapidly ultimately resulting in an increase of volume of water. In addition, when being froze water expands making it less dense than the water from which it freezes, causing the volume to also increase. The difficulty I faced in this experiment is pinpointing the exact change in the waters expansion. Two real world issues are when icebergs float as a result of water freezing resulting in expansion, another one is the warming of Earth due to the heat-trapping from greenhouse gases. This heat is absorbed by oceans and seas causing the temperature to rise and the water to expand.
Explanation:
How would the number of oxygen atoms in a 16.00 pound sample compare to the number of sulfur atoms in a 32 pound sample?
- Which particles are found in the nucleus of an argon
atom?
Answer:proton,neutrons,and electrons.
Explanation:
In a mixture of hydrogen and helium gases, the mole fraction of helium is 0.750. If the partial pressure of hydrogen in the mixture is 75 torr, what is the total pressure of the mixture?a. 100 torr b. 300 torr c. 19 torr d. 750 tor e. 760 torr
If the partial pressure of hydrogen in the mixture is 75 torr, the total pressure of the mixture is 100 torr.
What is partial pressure?Partial pressure is the notional pressure present in every gas.
Given,
The mole fraction of helium is 0.750.
The partial pressure of hydrogen in the mixture is 75 torr
The mole fraction of hydrogen is
To find the total pressure
By Roult's law
Partial pressures divided by mole fraction
75 / 0.750 = 100 torr
Thus, the correct option is a, 100 torr.
Learn more about pressure, here:
https://brainly.com/question/356585
1. At room temperature, air is usually a (solid, liquid, gas).
Metal X is soft and can be cut with a knife. It reacts vigorously with air and water. Identify metal X-
iron
copper
Sodium
gold
Answer:
The metal is most likely Sodium.
Explanation:
Iron is not soft enough to be cut with a knife and will not react violently with water. When Iron reacts with water it just slowly rusts.
Copper is somewhat malleable, however, does not really react with water and only forms an oxide layer in the air.
Sodium is soft enough to be cut with a knife (I know this because I have worked with it and seen people work with it). It is also an alkali metal which are known to explode when in water.
Gold is malleable but does not really react with anything and is considered inert.
The initial volume of a gas cylinder is 750 ml if the pressure of a gas inside the cylinder changes from 840 mm hg to 360 mm hg
Answer:
V₂ = 1750 mL
Explanation:
Given data:
Initial volume = 750 mL
Initial pressure = 840 mmHg
Final pressure = 360 mmHg
Final volume = ?
Solution:
The given problem will be solved through the Boly's law,
"The volume of given amount of gas is inversely proportional to its pressure by keeping the temperature and number of moles constant"
Mathematical expression:
P₁V₁ = P₂V₂
P₁ = Initial pressure
V₁ = initial volume
P₂ = final pressure
V₂ = final volume
Now we will put the values in formula,
P₁V₁ = P₂V₂
840 mmHg × 750 mL = 360 mmHg × V₂
V₂ = 630,000 mmHg.mL/360 mmHg
V₂ = 1750 mL
Why do you think some things float and some things sink?
Answer:
because some things have a higher density than other things
Explanation:
Answer:
some things float bc they have air inside of them which makes them rise bc air rises and gravity pulls so theyre working against each other. some things sink bc theyre heavy and gravity is already pulling them down so them being heavy just makes them sink faster. hope this helps!!!
Explanation:
Lexi is balancing equations. She is finding one equation to be very difficult to balance. Which explains how to balance the equation ZnSO4 + Li2CO3 → ZnCO3 + Li2SO4?
Answer:
deez
Explanation:
thx
Answer:
Atoms in the equation are already in balance
Explanation:
It's D
Convert from 1.56×1030 particles of sodium chloride (NaCl) to grams of sodium chloride.
Answer:
15.14×10⁷ g
Explanation:
Given data:
Number of particles of NaCl = 1.56×10³⁰ particles
Mass of sodium chloride = ?
Solution:
The given problem will solve by using Avogadro number.
It is the number of atoms , ions and molecules in one gram atom of element, one gram molecules of compound and one gram ions of a substance. The number 6.022 × 10²³ is called Avogadro number.
1 mole = 6.022 × 10²³ particles
1.56×10³⁰ particles × 1 mol / 6.022 × 10²³ particles
0.259 ×10⁷ mol
Mass in gram:
Mass = number of moles × molar mass
Mass = 0.259 ×10⁷ mol × 58.44 g/mol
Mass = 15.14×10⁷ g
If 8.2 mL of 0.055 M NaOH is required to titrate a 5.5 mL sample of potassium bitartrate, what is the [K +]?
Answer:
.082 M
Explanation:
You just do C1V1=C2V2
The concentration of the potassium bitartrate acid is determined as 0.082 M.
Concentration of the acidThe concentration of the potassium bitartrate acid is calculated as follows;
C1V1 = C2V2
where;
C1 is the concentration of the base = 0.055V1 is the volume of the base = 8.2 mlC2 is the concentration of the acidV2 is the volume of the acid = 5.5 mlC2 = (C1V1)/(V2)
C2 = (0.055 x 8.2)/(5.5)
C2 = 0.082
Learn more about concentration here: https://brainly.com/question/17206790
#SPJ2