A triangular box of sticky notes is shown. The volume of the box of sticky notes is 54.6 cubic inches. What is the height of the box of sticky notes?

To find the margin of error, we use the formula:

Margin of Error (ME) = Z * [tex]\sqrt{(p * (1-p) / n)}[/tex]

Z = 1.96 (for a 95% confidence level)

p = 0.33 (proportion of adults who said skim milk is a good calcium source)

(1-p) = 1 - 0.33 = 0.67 (complement of the estimated proportion)

n = 2406 (sample size)

ME = 1.96 * [tex]\sqrt{(0.33 * 0.67 / 2406)}[/tex] = 0.0185 (rounded to four decimal places)

This means that we can estimate, with 95% confidence, that the true proportion of adults who believe skim milk is a good calcium source falls within a range that is 1.85% above or below the reported proportion of 33% based on the survey results.

In other words, the actual proportion of adults who believe skim milk is a good calcium source could be as low as 31.15% or as high as 34.85% based on the margin of error.

The 1st and the 3rd are the distributions where the median the best measure of center

The median represents the central value in a dataset that is organized in ascending or descending order. If there are an even number of data points, the median can be calculated as the mean of the two middle values.

This method is much less prone to influence by extreme values when compared to other methods such as the mean. Hence, it is considered a more reliable measure of center particularly for datasets with outliers.

Read more on measure of centre here:https://brainly.com/question/15214370

#SPJ1

Marilyn has $75 to spend on two Series EE savings bonds as graduation gifts. The face values of the bonds she can buy are $50, $75, and $100. Therefore, she could buy two $50 bonds.

Since Marilyn has $75 to spend and she needs to buy two bonds, the total face value of the bonds she can purchase must be equal to $75.

Let x be the face value of the first bond, then the face value of the second bond must be 75 - x.

The face values of the bonds are $50, $75, and $100, so we can set up the following three equations

x + (75 - x) = 75 (since the total face value must be $75)

x = 50 (since the face value must be $50, $75, or $100)

x = 100 (since the face value must be $50, $75, or $100)

Solving these equations, we find that the possible face values for each bond are $50 and $25, $75 and $0, or $100 and $-25 (which is not a valid option).

Therefore, Marilyn could buy two bonds with face values of $50 each, or one bond with a face value of $75 and the other with a face value of $0 (which essentially means she would only be buying one bond).

To know more about bonds:

https://brainly.com/question/29198106

#SPJ4

Answer: To find the proportion of students who performed worse than Aaron, we need to find the area to the left of his score of 989 on the normal distribution curve.

First, we need to standardize Aaron's score using the formula:

z = (x - mu) / sigma

where x is the score, mu is the mean, and sigma is the standard deviation.

Plugging in the values, we get:

z = (989 - 1100) / 200 = -0.55

Next, we look up the area to the left of z = -0.55 on the standard normal distribution table, or use a calculator to find:

P(Z < -0.55) = 0.2912

Therefore, the proportion of students who performed worse than Aaron is approximately 0.2912, or 29.12% (rounded to 2 decimal places).

Step-by-step explanation:

Answer: A Rectangular prism 

If the degree of freedom is 24, your sample size when conducting a t-test for dependent means must be 25. Option C is the correct answer.

The sample size when conducting a t-test for dependent means depends on the specific study design and the level of significance desired, and cannot be determined solely based on the degrees of freedom.

However, if we assume that the sample size is equal for both groups, then the formula to calculate the degrees of freedom for a t-test for dependent means is:

df = n - 1

Where "n" is the number of pairs of observations in the sample.

Therefore, if the degree of freedom is 24, then the number of pairs of observations in the sample would be:

n = df + 1 = 24 + 1 = 25

Hence, the answer is 25.

Learn more about the degrees of freedom at

https://brainly.com/question/31178740

#SPJ4

Answer:

[tex]3.37 \times 9 \\ = 30.33[/tex]

hope it helps

The surface area of the given pyramid is 203 in²

From the question, we are to calculate the surface area of the given square pyramid

From the given information, the base of the pyramid is 7 in

and

The slant height of the pyramid is 11 in

The surface area of a pyramid can be calculated by using the formula

A = a² + 2al

Where A is the area of the pyramid

a is the side base

and l is the slant height

From the given information,

a = 7 in

and

l = 11 in

Thus,

Surface area = 7² + 2(7)(11)

Surface area = 49 + 154

Surface area = 203 in²

Hence,

The surface area is 203 in²

Learn more on Calculating the surface area of a Pyramid here: https://brainly.com/question/22744289

#SPJ1

According to the function, the 10th term of the sequence is 2.038.

We can now use the values of A1, A4, A2, and A3 to find the value of d. Substituting A2 and A3 into the expression for A4 - A3, we get:

A4 - A3 = d

2.86 - (A1 + 2d) = d

Solving for d, we get:

d = -0.12

Now that we know the common difference between consecutive terms, we can write the function rule for the nth term of the sequence as:

An = A1 + (n - 1)d

Substituting A1 = 3.1 and d = -0.12, we get:

An = 3.1 - 0.12(n - 1)

To find the 10th term of the sequence, we simply plug in n = 10 into the formula:

A10 = 3.1 - 0.12(10 - 1) = 2.038

To know more about function here

https://brainly.com/question/28193995

#SPJ4

Under the direct method, Gaulle will report cash collected from customers of $35,000.cash collected from customers is determined by adding the changes in Accounts Receivable to the revenues recognized during the period.

Beginning Accounts Receivable was $6,000 and ending Accounts Receivable was $9,000, indicating that customers owed Gaulle an additional $3,000 during the year.

Revenue for the year was $38,000, which represents the total sales generated by the company during the period. To calculate the cash collected from customers, we need to subtract the change in Accounts Receivable from the revenue recognized during the period.

Therefore, the cash collected from customers for Gaulle is calculated as follows:

Cash collected from customers = Revenue - Decrease in Accounts Receivable

= $38,000 - ($9,000 - $6,000)

= $35,000

Therefore, the answer is B. $35,000.

To know more about the accounts receivable turnover:

https://brainly.com/question/31264990

#SPJ4

Answer: 1. 45%

              2. 32%

              3. 67%

Answer:

4800

Step-by-step explanation:

15 x 20 = 300 x 16 = 4800

The relative minimum of the function include the following: -2.

In this exercise, you are required to determine the relative minimum of the function with respect to the vertex form of a quadratic function h(x) that is written in standard form. Mathematically, the vertex form of a quadratic equation is given by this formula:

y = a(x - h)² + k

Where:

Based on the information provided about this quadratic function, we can reasonably infer and logically deduce that that its vertex is at x equals negative three and y equals negative two.;

Vertex (h, k) = (-3, -2)

Therefore, the relative minimum is equal to -2.

Read more on vertex here: brainly.com/question/14946018

#SPJ1

The answer of the given question based on the cylinder is ,  the volume of the solid = 929.44  inch³ . , the mistake is student may have only calculated the volume of the inner cylinder.

Volume is amount of three-dimensional space occupied by object or substance. It is a physical quantity that is measured in cubic units, such as cubic meters (m³), cubic centimeters (cm³), or cubic inches (in³). The volume of an object can be calculated by measuring its dimensions and using a mathematical formula specific to its shape.

To find volume of  solid, we need to subtract  volume of  inner cylinder from  volume of outer cylinder.

Volume of the outer cylinder = πr²h

where r = radius of the outer cylinder = 4 inches (diameter is given as 8 inches)

h = height of the outer cylinder = 23 inches

Volume of the outer cylinder = π(4)²(23) = 368π in³

Volume of the inner cylinder = πr²h

where r = radius of the inner cylinder = 2 inches

h = height of the inner cylinder = 18 inches

Volume of the inner cylinder = π(2)²(18) = 72π in³

So, the volume of the solid = Volume of the outer cylinder - Volume of the inner cylinder

= 368π - 72π

= 296π

= 929.44  inch³

The student's answer of 988.05 in³ is significantly higher than the correct answer, suggesting that the student may have only calculated the volume of the inner cylinder instead of subtracting it from the volume of the outer cylinder. This mistake may have arisen due to misreading the problem or misunderstanding the instructions.

To know more about Radius visit:

https://brainly.com/question/12922563

#SPJ1

Answer:

Step-by-step explanation:

720

Answer:

To determine which equation represents how much the worker earns in x hours, we can use the table to find the rate of pay per hour, which is the change in wages divided by the change in hours:

Change in wages = $105.50 - $25.50 = $80

Change in hours = 6 - 2 = 4

Rate of pay per hour = Change in wages / Change in hours

= $80 / 4

= $20

Therefore, the worker earns $20 per hour. To find the total earnings, we can multiply the hourly rate by the number of hours worked:

y = $20x

Therefore, the correct equation is D) y = 10x, which represents how much the worker earns in x hours.

Step-by-step explanation:

Answer:

x=2

Step-by-step explanation:

This is a system of equations that we can solve by using substitution.

We know that y=7. We know that y is also equal to 8x-9.

Since y is equal to both 7 and 8x-9, this must mean that 7 is also equal to 8x-9.

Let's set them equal and solve for x, like so:

[tex]y=8x-9=\\7=8x-9=\\16=8x=\\2=x[/tex]

So, x=2.

It will take approximately 1.59 hours to fill the hot tub with a hose that has a filling rate of 4.6 gallons per minute

Assuming that the filling rate of the hose is constant, we can use the formula:

time = volume / rate

where time is the time taken to fill the hot tub, volume is the volume of the hot tub (440 gallons), and rate is the filling rate of the hose (4.6 gallons per minute).

Substituting the values, we get:

time = 440 / 4.6

which simplifies to:

time = 95.65 minutes

To convert minutes to hours, we divide by 60 (since there are 60 minutes in an hour):

time = 95.65 / 60

which simplifies to:

time = 1.59 hours

Therefore, it will take approximately 1.59 hours to fill the hot tub with a hose that has a filling rate of 4.6 gallons per minute.

Learn more about filling rate

https://brainly.com/question/26938204
#SPJ4

It will take approximately 1.594 hours to fill a 440-gallon hot tub with a hose that fills at a rate of 4.6 gallons per minute.

To determine how many hours follow these steps:

First, we need to find out how many minutes it takes to fill the hot tub.

Divide the total volume of the hot tub (440 gallons) by the rate at which the hose fills (4.6 gallons per minute):

440 gallons ÷ 4.6 gallons/minute = 95.65 minutes

Now, we need to convert the minutes into hours.

Since there are 60 minutes in an hour, divide the minutes by 60:

95.65 minutes ÷ 60 minutes/hour = 1.594 hours

It will take approximately 1.594 hours to fill a 440-gallon hot tub with a hose that fills at a rate of 4.6 gallons per minute.

for such more question on word problem

https://brainly.com/question/21405634

#SPJ11

The solutions to the equation x² + 10x + 22 = 13 are: x = -5 ± 4

To rewrite the equation by completing the square, we need to isolate the constant term on one side and group the x-terms together. Starting with:

x² + 10x + 22 = 13

Subtracting 13 from both sides:

x² + 10x + 9 = 0

Next, we add and subtract the square of half of the coefficient of x (which is 5 in this case) to complete the square:

x² + 10x + 25 - 25 + 9 = 0

x² + 10x + 25  - 16 = 0

Factor the perfect square trinomial:

(x + 5)² - 16 = 0

Now that we have rewritten the equation in the form (x + c)² = d, we can solve for x by taking the square root of both sides:

(x + 5)² - 16 = 0

Taking the square root of both sides and solving for x, we get:

x + 5 = ±4

So, we have

x = -5 ± 4

So the solutions to the equation are:

x = -5 + 4 = -1

x = -5 - 4 = -9

Therefore, the answer is x = -5 ± 4.

Read more about completing the square at

https://brainly.com/question/13981588

#SPJ1

Since the center of this semicircle is at the origin, O (0, 0), the radius of the semicircle is 5 units.

Since the center of this semicircle is at the point A (3, 4) and point B (-4, 5), the radius of the semicircle is 5√2 units.

In Mathematics and Geometry, the distance between two (2) points that are on a coordinate plane can be calculated by using the following mathematical equation (formula):

Distance = √[(x₂ - x₁)² + (y₂ - y₁)²]

Where:

x and y represents the data points (coordinates) on a cartesian coordinate.

By substituting the given points into the distance formula, we have the following;

Distance = √[(x₂ - x₁)² + (y₂ - y₁)²]

Distance = √[(3 - 0)² + (4 - 0)²]

Distance = √[(3)² + (4)²]

Distance = √(9 + 16)

Distance = √25

Distance = 5 units.

At point A (3, 4) and point B (-4, 5), the radius is given by;

Distance = √[(-4 - 3)² + (5 - 4)²]

Distance = √[(-7)² + (1)²]

Distance = √(49 + 1)

Distance = √50 = 5√2 units.

Read more on distance here: brainly.com/question/12470464

#SPJ1

Missing information:

The question is incomplete and the complete question is shown in the attached picture.

A value of 0.25 for p(1-p) in the sample size formula when the true value of p is unknown.

This is because the value of p(1-p) is maximum when p=0.5, and since we do not have any information about the true value of p, assuming p=0.5 is the most conservative approach. Therefore, to calculate the sample size required to estimate a proportion using a confidence interval with a margin of error e, we can use the formula:

[tex]n = [z^2 * p(1-p)] / e^2[/tex]

where z is the z-score corresponding to the desired level of confidence (e.g., 1.96 for 95% confidence), and e is the desired margin of error. We can use p=0.5 and solve for n to get a conservative estimate of the sample size required for the given confidence level and margin of error.

Learn more about sample size ,

https://brainly.com/question/30885988

#SPJ4

If prior knowledge or data suggests that the proportion is significantly different from 0.5, then a more accurate estimate of p should be used in the formula.

To calculate the sample size formula for estimating a proportion using a confidence interval with a margin of error e, we

use the following formula:

[tex]n = (Z^2 × p × (1-p)) / e^2[/tex]

where n is the required sample size, Z is the Z-score corresponding to the desired level of confidence,

p is the estimated proportion, and

e is the margin of error.

Since the product p(1-p) is not known, a conservative approach is to use p = 0.5, which is the value that maximizes the

product p(1-p) for any given proportion.

This approach ensures that the sample size will be large enough to obtain a reliable estimate of the proportion, even if

the true proportion is close to 0 or 1. However, if prior knowledge or data suggests that the proportion is significantly

different from 0.5, then a more accurate estimate of p should be used in the formula.

for such more question on margin of error

https://brainly.com/question/30404882

#SPJ11

Answer:

2.15g + 0.75w = 20.35

Step-by-step explanation:

(no explanation needed)

For an event based on order by sam for ham and coffee with different probabilities, then the probability that he will order neither ham nor coffee is equals to the 0.07.

We have sam is a regular customer at joe's diner. Let us consider two events be defined as A: sam will order ham

B: sam will order coffee

Now, the probability that sam will order ham, P( A) = 0.8

The probability that sam will order coffee, P( B) = 0.65

We have to determine the probability that he will order neither ham nor coffee.

Probability is chances of occurrence of an event. It is calculated by dividing the favourable response to total possible outcomes. Probability value always lies between 0 to 1. Apply probability law P( will order ham ) + P( will not order ham) = 1

=> Probability that sam will not order ham

[tex]P( \bar A ) [/tex] = 1 - 0.8 = 0.2

Probability that sam will not order coffee,

[tex]P( \bar A ) [/tex]= 1 - 0.65 = 0.35

Now, as we see both events A and B are independent events so, there corresponding also independent. Therefore, Probability that he will order neither ham nor coffee, [tex] P( \bar A ∩ \bar B) [/tex]

[tex]= P( \bar A) P(\bar B) [/tex]

= 0.2 × 0.35 = 0.07

Hence, required probability is 0.07.

For more information about probability, visit:

https://brainly.com/question/25870256

#SPJ4

An F test is used to test the hypothesis that the values of the regression parameters β1, β2, . . . , βq are all zero. So the correct option is A.

The F test is based on the ratio of the mean square of the regression to the mean square of the error, and it is used to test the overall significance of the regression model. It tests whether there is a linear relationship between the independent variables and the dependent variable, and whether the model is statistically significant. In contrast, a t test is used to test the significance of individual regression coefficients, and the least squares method is a technique used to estimate the parameters of a linear regression model. Extrapolation is the process of estimating values of a dependent variable outside the range of the independent variables based on the regression model.

Learn more about hypothesis ,

https://brainly.com/question/29519577

#SPJ4

The F test is used to test the hypothesis that the values of the regression parameters β1, β2, . . . , βq are all zero. therefore, option a. an F text is correct.

This test is commonly used in regression analysis to determine whether there is a significant relationship between the

dependent variable and the independent variables.

The F test compares the variance explained by the regression model to the residual variance, and the null hypothesis

assumes that all regression coefficients are equal to zero, indicating no relationship between the dependent variable

and the independent variables.

If the calculated F-statistic is larger than the critical value, we reject the null hypothesis and conclude that there is a

significant relationship between the dependent variable and the independent variables.

for such more question on  F test

https://brainly.com/question/17256783

#SPJ11

Let's assume that Mr. and Mrs. Johnson bought x adult tickets and y children's tickets.

Since there are three children, we know that:

y = 3x

The total cost of the parents' tickets is 7x, and the total cost of the children's tickets is 4y. Substituting y = 3x, we get:

total cost of parents' tickets = 7x

total cost of children's tickets = 4(3x) = 12x

Therefore, the ratio of the total cost of the parents' tickets to the total cost of the children's tickets is:

(7x) / (12x) = 7/12

So the answer is 7/12, which cannot be simplified further. Therefore, the ratio is 7/12, which can be written in the form aib as 0+7/12i.

Answer: 7:6

Step-by-step explanation:

1. There are two adults (Mr. and Mrs. Jonhson) and three children. So let's make adults = y and children = x

2. Adult tickets cost $7. So we are going to multiply 7 x 2y = $14

3. Children's tickets cost $4. So we are going to multiply 4 x 3x = $12

4. The last step is to fully reduce [tex]\frac{14}{12}[/tex] = [tex]\frac{7}{6}[/tex]

5. So the answer is 7:6

A) The correct features is,

⇒ a = 9000

⇒ r = 15%

B) The equation correctly models the context of the problem is,

⇒ y = 9000 (0.85)ˣ

We have to given that;

Tiffany’s mother bought a car for $9000 five years ago.

And, She wants to sell it to Tiffany based on a 15% annual rate of depreciation.

Now, We have;

the exponential growth formula is,

⇒ y = a(1 − r)ˣ

Here, We have;

⇒ a = 9000

⇒ r = 15%

Thus, We get;

The equation correctly models the context of the problem is,

⇒ y = a(1 − r)ˣ

⇒ y = 9000 (1 - 0.15)ˣ

⇒ y = 9000 (0.85)ˣ

Therefore, We get;

A) The correct features is,

⇒ a = 9000

⇒ r = 15%

B) The equation correctly models the context of the problem is,

⇒ y = 9000 (0.85)ˣ

Learn more about the percent visit:

https://brainly.com/question/24877689

#SPJ1

The exponential function that represents the data in the table is given as follows:

y = 3(2)^x.

The standard definition of an exponential function is given as follows:

y = a(b)^x.

In which the parameters are given as follows:

From the table, when x = 0, y = 3, hence the parameter a is given as follows:

a = 3.

When x is increased by one, y is multiplied by 2, hence this is an exponential function and the parameter b is given as follows:

b = 2.

Hence the function is defined as follows:

y = 3(2)^x.

More can be learned about exponential functions at https://brainly.com/question/2456547

#SPJ1

Answer:

24 slices

Step-by-step explanation:

There are 3 whole pizzas. He cuts each of them into eighths. That means eight slices. 3 times 8 is 24. There are a total of 24 slices. This can also look like this: 24/8   or 24 over 8.  Which also equals to 3.