total distance travel by the red spot is 4 times of Amplitude
Given:
A transverse wave on a string has an amplitude "A". A tiny spot on the string is colored red.
To find:
Distance travelled by red spot in one cycle of the wave.
Solution:
So, we know that particles in a transverse wave oscillate periodically in a direction perpendicular to propagation of wave.
Frankly speaking, the type of motion shown by particles is SHM (simple harmonic motion)
So, in a wave cycle, the red dot will start from a particular position and will end at the same position.
Let's assume that the red coloured part started from mean point. So, it will go to one extremity return back to the other extremity and finally end at the mean position.
So, it traverses a distance 4 times of the Amplitude.
Learn more about SHM (Simple Harmonic Motion) here:
https://brainly.com/question/26114128
#SPJ4
An 8000-N car is moving at 12 m/s along a horizontal road. The driver applies the breaks and the car skids to a stop. How much kinetic energy is lost? Group of answer choices 4.8*104 J 4.8*106 J 5.8*105 J 5.9*104 J 1.2*105 J
58775.51 J kinetic energy is lost,
Energy lost = 0.5*mv²
= 0.5*8000/9.8 * 12*12
= 58775.51 J
To calculate the energy loss of a moving object, subtract the initial kinetic energy from the final kinetic energy, where the initial and final kinetic energies are calculated using the formula 1/2*M*V^2.
When energy is transformed from one form to another or moved from one area to any other, or from one device to another there's energy loss. This means whilst energy is converted to a different form, some of the entering energy is become an especially disordered form of energy, like heat.
Learn more about kinetic energy here: https://brainly.com/question/8101588
#SPJ4
A long wire carries a current toward the north in a magnetic field that is directed vertically downward perpendicular to the surface of Earth. What is the direction of the magnetic force on the wire
The direction of the magnetic force on the wire is west.
The magnetic force acting on the moving protons acts northward in the horizontal plane. If the thumb is up (current flows vertically up), the wrapped finger will be counterclockwise.
Therefore, the direction of the magnetic field is counterclockwise. Here, the magnetic field is pointing upwards (vertical magnetic field) and the electrons are moving east. Applying Fleming's left-hand rule here, we can see that the direction of force is along the south direction.
As the change in magnetic flux increases upwards, Lenz's law indicates that the induced magnetic field of the induced current must resist and the inside of the loop must be directed downwards. Using the right-hand rule, we can see that a clockwise current is induced.
Learn more about the magnetic fields here: https://brainly.com/question/7802337
#SPJ4
The direction of the magnetic force on the wire is vertically downward.
We will locate the magnetic area this is as a result of transferring charges and the usage of a second right-hand rule.
The magnetic area is made by using a modern immediate wire that curls across the cord in a ring. You can discover it via pointing your right thumb in the path of the cutting-edge inside the wire and curling your fingers.
Right-hand thumb rule: in line with this rule, if we believe the linear cord conductor to be held in the grip of the right hand so that the thumb factors inside the path of the contemporary, then the curvature of the palms across the conductor will represent the route of magnetic discipline traces.
Learn more about the Right-hand thumb rule here: https://brainly.com/question/14434299
#SPJ4
A piano of mass 852 kg is lifted to a height of 3.5 m. How much gravitational potential energy is added to the piano? Acceleration due to gravity is g = 9.8
m/g2
Answer:
Gravitational Potential Energy = Mass*Gravity*Height.
GPE = 852 * 9.8 * 3.2
GPE = 26718.72 Newtons.
A sphere of radius 6cm is moulded into a thin cylindrical wire of length 32cm. Calculate the radius of the
wire in SI Units
Answer:
4/3 pi R^3 = pi r^2 L equating volume of sphere and wire
r = (4 R^3 / 3 * L)^1/2 solving for radius of wire
r = (4 * 6^3 / 3 * 32)^1/2
r = 9^1/2 cm = 3 cm = .03 meters
What is the mass moment of inertia of a 20kg sphere with a radius of 0.2m about a point on the sphere's perimeter
Answer:
I = M R^2 is the moment of inertia about a point that is a distance R from the center of mass (uniform distributed mass).
The moment of inertia about the center of a sphere is 2 / 5 M R^2.
By the parallel axis theorem the moment of inertia about a point on the rim of the sphere is I = 2/5 M R^2 + M R^2 = 7/5 M R^2
I = 7/5 * 20 kg * .2^2 m = 1.12 kg m^2
Acceleration of a particle moving along x axis is given
by a = x. At x = 0, v = 2 m/s. Find velocity as a
function of x.
(a) √√√x+2
(c) √√x +4
(b) √x² +2
2
(d) √x² +4
B. The velocity of the particle with respect to the acceleration is √x + 4.
What is velocity?
Velocity is the rate of change of displacement with time.
The velocity of the particle with respect to the acceleration of the particle is calculated as follows;
vf = v₀ + at
where;
vf is the final velocityv₀ is the initial velocitya is acceleration, assuming a = √x + 2t is timevf(x) = 2 + (√x + 2)
vf(x) = √x + 2 + 2
vf(x) = √x + 4
Learn more about velocity here: https://brainly.com/question/6504879
#SPJ1
A student walks 50 meters east, 40 meters north, 35 meters east, and then 20 m south. What is the magnitude and direction of the student's total displacement
Answer: A student walks 50 meters east, 40 meters north, 35 meters east, and then 20 m south. Then the magnitude and direction of the student's total displacement will be 87.32 m along the direction of AD or in east-south direction.
Explanation: To find the correct answer, we need to know about the Displacement of a body in motion.
What is displacement of a body in motion?The displacement is the shortest distance between initial and final positions of a body.It's a vector quantity, and can positive, negative, or zero.The magnitude of displacement is less than or equal to the distance travelled.How to solve the problem?At first, we can draw a diagram showing the motion of the body.From the diagram, the displacement of the body will be equal to the distance between point A and D.To solve this, we can use Pythagoras theorem.[tex]AD=AC+CD\\AC^{2} =50^{2} +11^2\\AC=51.19 m\\Similarly,\\CD^2=35^2+9^2\\CD=36.13 m\\thus, \\AD=51.19+36.13=87.32 m[/tex]
Thus, from the above calculations, we can conclude that, the displacement of the body will be equal to 87.32 m along the direction of AD or in east-south direction.
Learn more about the Displacement here:
https://brainly.com/question/28020108
#SPJ4
LSST stands for Long Space Standard Telescope.
True
Or False
false In order to use the efficiency of a car engine in an optimal way, a maximum engine speed of .........RPM for shifting is recommended for gas engines
In order to use the efficiency of a car engine in an optimal way, a maximum engine speed of 2500 RPM for shifting is recommended for gas engines.
A car's fuel efficiency is determined by how well it converts the energy in its fuel into kinetic energy for movement.
Most of the time, it's advisable to maintain a speed below 2500 rpm for economic reasons.
Range of 2000-2500 rpm is the best for shifting as
1) It is the most favorable range for the engine due to economic reasons.
2) It saves fuel.
3) It also keeps the engine heavy.
After this range, the economy usually declines.
Even though moving gears doesn't significantly affect engine life due to technological developments, but shifting for gas engines is recommended at 2000-2500 rpm.
Hence, 2500 rpm is the maximum engine speed recommended for gas engines for shifting.
Learn more about efficiency of car engine here https://brainly.com/question/11775858
#SPJ4
If a mineral contains only atoms of oxygen and a metal, it is most likely
O an oxide.
O a sulfate.
a phosphate.
a silicate.
Use the concepts on which maxwell’s equations are based to explain why a compass needle is deflected when the compass is brought near a wire that is carrying an electric current.
A conductor that is conducting current generates a magnetic field everywhere around it. This magnetic field exerts force on the compass's magnetic needle, causing the needle to deviate.
Definition of Maxwell's rule
A current-conducting conductor creates a magnetic field everywhere around it. The magnetic needle of the compass experiences force from this magnetic field, which causes the needle to veer.
Equation for deflection
We have so far established that the total flux of electric field out of a closed surface is just the total enclosed charge multiplied by 1/ε0, ∫→E⋅d→A=q/ε0. This is Maxwell's first equation. It represents completely covering the surface with a large number of tiny patches having areas d→A.
To learn more about magnetic field refer : https://brainly.com/question/24761394
#SPJ4
The period of a pendulum depends on _____. Select all that apply. The period of a pendulum depends on _____. Select all that apply. its mass the string length the amplitude of the motion gravity the value of the pendulum constant
Answer:
Period is proportional to (L / g)^1/2
Only the length of the string and the force of gravity will affect the motion of a simple pendulum.
The time period of a pendulum depends on the length of pendulum, acceleration due to gravity and to some extends its amplitude also.
What is simple pendulum?A simple pendulum is a suspended body with one of its end fixed on a support and it is free to swing back and forth. The equation for the time period of simple pendulum is written as:
[tex]\rm T = 2\pi \sqrt{ \frac{l}{g} }[/tex]
Hence, the factors which affects the time period of pendulum are length and acceleration due to gravity g. This time period of the pendulum is the time taken to cover one complete oscillation.
Up to some extend the amplitude of the swing may affect the time period. However, mass has no effect on the period of a simple pendulum.
To find more on pendulum, refer here:
https://brainly.com/question/14798353
#SPJ2
You can, in an emergency, start a manual transmission car by putting it in neutral, letting the car roll down a hill to pick up speed, then putting it in gear and quickly letting out the clutch. If the car needs to be moving at 3.5 m/s for this to work, how high a hill do you need
Answer: 0.625 m
Explanation:
Given:
Final velocity of the car = 3.5 m/s
While the car rolls down the hill, there is a conversion of potential energy (PE) to kinetic energy (KE). Therefore, applying the conversion of energy as,
[tex]$$Total energy at height $(\mathrm{h})=$ Total energy at bottom$$\begin{aligned}&K E+P E=K E^{\prime}+P E^{\prime} \\&0+m g h=\frac{1}{2} m v^{2}+O \\&m g h=\frac{1}{2} m v^{2}\end{aligned}$$[/tex]
Here, m denotes the mass of the car, g is the gravitational acceleration, having a value of 9.8 m/s^2. And h is the height of the hill.
Solving for h,
[tex]\begin{aligned}&g h=\frac{l}{2} v^{2} \\&h=\frac{1}{2} \times \frac{v^{2}}{g} \\&h=\frac{1}{2} \times \frac{3.5^{2}}{9.8} \\&h=0.625 \mathrm{~m}\end{aligned}[/tex]
Therefore, the required height of hill is 0.625 m
Bring a negatively-charged strip near the neutral electroscope but do not touch the knob. What happens
Positive charges are gathered on the neutral electroscope near the negatively charged strip.
To find the answer , we need to know about the induction of charge.
What's the induction of charge?When an electrically charged object is kept close to an neutral conductor, induced charage is produced in the conductor. This method is induction of charge.The induced charges have opposite sign to that of the charged object. Why are the charges induced in the neutral conductor?A charged particle attracts another oppositely charged particle. Similarly the charged object attracts the opposite charges present in that neutral conductor. So the oppositely charged particles present in the conductor are gathered at the side of the charged object and produce induced charges.Thus, we can conclude that the positive charges are gathered on the neutral electroscope near the negatively charged strip.
Learn more about the induction of charge here:
brainly.com/question/15589787
#SPJ4
Which two theories disagree when it comes to describing the singularity thought to be at the center of a black hole
when it comes to describing the singularity thought to be at the center of a black hole Quantum physics and Einsteinʹ s general theory of relativity theories disagree.
What is the singularity of a black hole?
It is the center of the black hole, a place of infinite density where the known laws of physics cannot describe the conditions.It is place from which the escape velocity exceeds the speed of light.According to Einsteinʹ s general theory of relativity:
Theory of relativity holds that what we perceive as the force of gravity arises from the curvature of space and time. The scientist proposed that objects such as the sun and the Earth change this geometryfrom this we can say that,
It doesn't agree the concept of describing the singularity thought to be at the center of a black hole
Hence,
when it comes to describing the singularity thought to be at the center of a black hole Quantum physics and Einsteinʹ s general theory of relativity theories disagree.
Learn more about black hole here:
https://brainly.com/question/10597324
#SPJ4
Suppose you are an engineer building a road across a mountain. From a prudential point of view, it would be easier and cheaper to build it through a family’s farm. This option would require compelling the family to move, which would be an extreme hardship for them. From a moral point of view, the family should be allowed to stay on their farm. Which view should take precedence?
Compensation may be provided, and a temporary residence provided, to the family so that they may make necessary adjustments to their living arrangements and other work-related matters. Even if it's not the nicest way to go about things, it's the most effective.
What is compensation due to damages?
Generally, Money given to a successful plaintiff in civil litigation is known as "compensatory damages." Damage awards are handed out by the civil justice system.
In conclusion, Engineers have a responsibility to find optimal solutions that satisfy the demands of the public in a manner that is both practical and beneficial to the progress of the country as a whole. In this case, forcing the farm family to relocate would be very difficult and upsetting for them, but it would be quite useful for the community as a whole if a road were to be constructed.
Read more about compensation
https://brainly.com/question/13755469
#SPJ1
The info below shows three kettles with their powers and the time they take to boil 500cm3 of water. If electricity costs 9p per unit, how much does it cost to boil 500cm3 of water using the 3kW kettle?
Kettle 1= 3mins =3kW
Kettle 2= 3.5mins= 2.2kW
Kettle 3=4.5mins=1.4kW
The cost of boiling 500 cm³ of water using the 3 KW Kettle is 1.35p
What is power?This is defined as the rate in which energy is consumed. Electrical power is expressed mathematically as:
Power (P) = Energy (E) / time (t)
P = E / t
How to determine the energyPower (P) = 3 KWTime (t) = 3 mins = 3 / 60 = 0.05 hEnergy (E) =?E = Pt
E = 3 × 0.05
E = 0.15 KWh
How to determine the costEnergy (E) = 0.15 KWhCost per unit = 9pCost =?Cost = Energy × cost per unit
Cost = 0.15 × 9
Cost = 1.35p
Learn more about electrical power:
https://brainly.com/question/64224
#SPJ1
A 1,160 kg satellite orbits earth with a tangential speed of 7,446 m/s. if the satellite experiences a centripetal force of 8,955 n, what is the height of the satellite above the surface of earth? recall that earth’s radius is 6.38 × 106 m and earth’s mass is 5.97 × 1024 kg. 3.71 × 1028 m 8.02 × 105 m 7.20 × 105 m 9.67 × 1028 m
The satellite is 8.02 × 10⁵ m above Earth's surface.
Let H be the height above the surface of the Earth; since we know that the satellite is rotating around the Earth due to the gravitational pull of the planet, we may assert
Procedure to solve:
F = mv²/R+H
H = mv²/F - R
H = (1160 × 7446²/8955 - 6.38 × 10⁶)
M = 8.02 × 10⁵ m
About centripetal force:
The force applied to an item that is in velocity of curved motion that is pointed toward the axis of rotation or the centre of curvature is known as a centripetal force.
The centripetal force formula is given as the product of mass (in kg) and tangential velocity (in meters per second) squared, divided by the radius (in meters) that implies that on doubling the tangential velocity, the centripetal force will be quadrupled. Mathematically it is written as:
F = mv²/r
Learn more about velocity here:
https://brainly.com/question/18084516
#SPJ4
Answer:
8.02x 10^5 m
Explanation:
quiz
calculate the volume of an object of mass 500g whose density is 70kgm-3
Answer:
Amount Unit
132.48935 kilogram
132489.35 gram
132489350 milligram
0.13248935 ton
292.08925642428 pound (lb)
662446.75 carrat
2044623.1271428 grain
7.9786897063466E+28 atomic mass unit
What do you mean by focus in science
When you "Rate," or analyze, the consequences of your decisions, HELP can assist you with which of the following?
When you "Rate," or analyze, the consequences of your decisions, HELP can assist an individual with: B. evaluating the consequences of his or her decisions.
What is the decision-making process?The decision-making process refers to a cognitive process that involves obtaining information, analyzing them, and then evaluating alternatives, so as to enable the proper selection of an optimum solution (choice) to a particular problem.
Based on personal health skills, we can infer and logically deduce that HELP can assist an individual with evaluating the consequences of his or her decisions when he or she "Rate," or analyze, the consequences of your decisions.
Read more on decision-making process here: https://brainly.com/question/8649509
#SPJ1
Complete Question:
When you "Rate," or analyze, the consequences of your decisions, HELP can assist you with which of the following?
A. identifying what is most important.
B. evaluating the consequences of decisions.
C. determining what decision needs to be made.
D. narrowing the possibilities and acting on the best one.
The speed of ultrasound in human body is 1540 m/s. A procedure is performed with a frequency of 2.57 MHz is used. To monitor the heart rate of a fetus, the maximum frequency shift is 100 Hz. The maximum speed of a vibrating heart is _____ cm/s.
2.49 cm/s is the maximum speed of vibrating heart.
Given,
Frequency of ultrasonic wave = 2.57 MHz = 2.57 ×[tex]10^{6}[/tex] Hz
Speed of ultrasound = 1540m/s
The maximum frequency shift = 100 Hz
Maximum speed of heart = ?
By using Doppler equation
[tex]f1 = f0(\frac{c + v}{c} )[/tex] …..(1)
[tex]f2 = f1 (\frac{c}{c - v} )[/tex] ….. (2)
From equation (1) & (2)
[tex]f2= f0(\frac{c+v}{c-v} )[/tex]
[tex]f2 = 2.57[/tex] ×[tex]10^{6} + 100 = 2570100[/tex] Hz
[tex]f0 = 2570000[/tex] Hz
c = 1540 m/s
So,
[tex]2570100 = 2570000(\frac{1540 + v}{1540 - v} )[/tex]
1.00003(1540-v) = 1540+v
1540.05 - 1.00003v = 1540 +v
2.00003v = 0.05
v= 0.0249 m/s
v= 2.49 ×[tex]10^{-2}[/tex] m/s
v= 2.49 cm/s
So, the maximum speed of vibrating heart is 2.49 cm/s
Learn more about Doppler equation here https://brainly.com/question/14082883
#SPJ4
An electric furnace that draws 40 amps with an applied voltage of 240 V will consume ________ watts.
The electric furnace will consume 9600 watt of power.
To find the answer, we need to know about the electric power.
What's the electric power?Electric power is defined as the product of voltage and current.Mathematically, power= V×IIts si unit is watt.What will be the power consumed by an electric furnace that draws 40A with an applied voltage of 240V?The power = 240×40 = 9600 watt
Thus, we can conclude that the power consumption of the electric furnace is 9600 watt.
Learn more about the electric power here:
brainly.com/question/13080026
#SPJ4
Two charged particles are a distance of 1.72 m from each other. One of the particles has a charge of 8.08 nC, and the other has a charge of 4.02 nC. (a) What is the magnitude (in N) of the electric force that one particle exerts on the other
The magnitude (in N) of the electric force that one particle exerts on the other is A. F=107.6nN.
F=[(9×10^9) ×(7.10×10^-9) ×(4.42×10^-9)] /(1.62^2)
F=(282.4×10^-9)/2.6244
F=107.6×10^-9N
F=107.6nN
Experiments with electric charges have shown that two charged objects exert electrical forces on each other. The magnitude of the force is linearly proportional to the net charge of each object and inversely proportional to the square of the distance between the objects.
Coulomb's law for calculating electrostatic forces. This force arises from the interaction between two charged objects (or point charges), the magnitude of which is calculated by F = kQ1Q2r2 F = k Q 1 Q 2 r2.
Learn more about the electric field here: https://brainly.com/question/14372859
#SPJ4
A 0.500 kg bullet is fired from a gun at 25.0 m/s, how much kinetic energy does it have?
Considering the definition of kinetic energy, the bullet has a kinetic energy of 156.25 J.
Kinetic energyKinetic energy is a form of energy. It is defined as the energy associated with bodies that are in motion and this energy depends on the mass and speed of the body.
Kinetic energy is defined as the amount of work necessary to accelerate a body of a given mass and in a rest position, until it reaches a given speed. Once this point is reached, the amount of accumulated kinetic energy will remain the same unless there is a change in speed or the body returns to its rest state by applying a force to it.
The kinetic energy is represented by the following expression:
Ec= ½ mv²
Where:
Ec is the kinetic energy, which is measured in Joules (J).m is the mass measured in kilograms (kg).v is the speed measured in meters over seconds (m/s).Kinetic energy of a bulletIn this case, you know:
m= 0.500 kgv= 25 m/sReplacing in the definition of kinetic energy:
Ec= ½ ×0.500 kg× (25 m/s)²
Solving:
Ec= 156.25 J
Finally, the bullet has a kinetic energy of 156.25 J.
Learn more about kinetic energy:
https://brainly.com/question/25959744
https://brainly.com/question/14028892
#SPJ1
Two thin wires rings each having a radius R are placed at a distance d apart with their axes coinciding. The charges on the two rings are +q and –q. The potential difference between the centres of the two rings is
Answer:
Q/4πε0 [1/R - 1/√R2+d2]
Explanation:
Q/4πε0 [1/R - 1/√R2+d2] is the answer
explanation is attached.
toppr
Why do we use atomic models?
An observer views a spectrum and notes two characteristics of the spectrum:
1) most of the colors of a continuous spectrum are present,
2) at certain wavelengths, light is missing such that several dark lines are seen in the spectrum.
Describe the objects that are causing this spectrum to be seen. Be sure to state the relative temperatures of the objects that are involved in creating this spectrum.
The spectrum seen is the absorption spectrum. The wavelengths corresponding to those of the material through which light is being passed are absorbed, which leads to the occurrence of several dark lines in the spectrum.
White light when the incident with the object caused it to absorb the wavelengths corresponding to its excitation energy. These are characteristics of a particular atom/molecule.
Hence using this those can be identified. The absorption of the external energy leads the atoms to go to an excited state, hence the temperature increases.
Learn more about wavelengths here: https://brainly.com/question/19385753
#SPJ4
In the experiment you used objects with masses that were not necessarily known. Assume that it is determined that the mass of an object that produces a deformation of size 3, is 120 grams. What is the mass of an object that would produce 1 unit of deformation
Answer:
40 gm
Explanation:
size one is 1/3 of size 3
so the mass is also 1/3
1/3 * 120 gm = 40 gm
What mirror setting leaves large areas that cannot be seen in the mirrors on both sides of the vehicles
Convex mirror is used on both sides of the vehicle to see large areas.
To find the answer, we need to know about convex mirror.
What is convex mirror?
Convex mirror is a spherical mirror. Its reflecting surface bluges towards the light source. It's also called diverging mirror as it diverges the light rays fall on it.How can we see large areas with convex mirror?As convex mirror is a diverging mirror, so it reduces the size of an object in front of it. Thus, it provides more space in the mirror to capture a larger amount of rays coming from wider angles from bigger objects.Thus, we can conclude that the convex mirror is used on both sides of the mirror to view large areas.
Learn more about the convex mirror here:
brainly.com/question/14269744
#SPJ4