. A train is approaching a station at a velocity of 40 m/s. The train brakes and
within 10 seconds comes to a stop. What is the train's acceleration?

65.3 kPa is  the new pressure of the helium.

V1=  4800 m3

V2= 7200 m3.

P1= 98 kPa.

P2=?

P1V1=P2V2

P2=P1V1/V2

P2= 98×4800÷7200

P2=65.3 kPa.

The definition of pressure is force/area. For instance, the weight of the snow divided by the area of the roof would represent the pressure from snow on a roof. Gases are often where pressure in chemistry originates from. Vacuum is the term for the lack of pressure. Since "nature abhors a vacuum," humans have believed that vacuums are both impossible and unnatural for hundreds of years. This isn't really the case.

The amount of pressure units is insane! The torr or mmHg is a common unit. Simply put, this refers to the height of a mercury column. The atmospheric pressure is about 760 torr, or mmHg. You may also see mmH2O, which employs the same notion, but in this instance the atmospheric pressure is around 10.3 mH2O since water is less dense than mercury.

To know more about  pressure visit : brainly.com/question/18124975

#SPJ9

Since the diagram above shows fossils and rock features, X is an intrusion that is younger than layers Y and Z. Therefore, the correct answer option is:  intrusion, younger than layers Y and Z.

In Science, a fossil can be defined as the mineral impression or remains of both living and non-living organisms that are generally considered to be prehistoric in nature.

Additionally, rock strata (layers) that are found in various parts of the world are usually unique and different from one another because they are all composed of distinct geological history of planet Earth, which are commonly referred to as fossils.

This ultimately implies that, fossils are ancient organisms such as plants and animals that were formed into rocks.

By critically observing the rock strata (layers) shown in the image attached above, we can reasonably infer and logically deduce that X would be classified as an intrusion and it is younger than rock layers Y and Z.

Read more on fossils here: brainly.com/question/11224681

#SPJ1

The velocity of the bowling ball is 4 m/s when mass of the bowling ball is 3.5 kg and  momentum given is 14kgm/s.

As we know that,

Momentum= Mass* Velocity

p=mv

Here, Mass of the Bowling Ball(m)= 3.5 Kg

Momentum(p)= 14kgm/s

Velocity= Momentum/Mass

=14/3.5 = 4m/s

The definition of momentum is "mass in motion." Since every item has mass, if it is moving, it must have momentum since its mass is in motion. The quantity of motion and the speed of the motion are the two factors that determine how much momentum an item possesses. The factors mass and velocity affect momentum. According to an equation, an object's momentum is determined by multiplying its mass by its velocity.

Learn more about Momentum here:

https://brainly.com/question/24030570

#SPJ4

To answer this question, we need to use the formula for momentum, which is:

momentum = mass * velocity

We can rearrange this formula to solve for velocity, which is:

velocity = momentum/mass

We are given the momentum and the mass of the bowling ball, so we can plug them into the formula:

velocity = 14 / 3.5

We can simplify this expression by dividing both numbers by 0.5:

velocity = 28 / 7

We can convert this fraction into a decimal by dividing the numerator by the denominator:

velocity = 4

Therefore, the bowling ball is travelling at 4 m/s.

The answer is Aerodynamic Shaping.

Aerodynamic Shaping can reduce the drag force of an automobile and hence Increase the car's gas mileage. Integrated into the overall shape of an aerodynamic car are the wheel arches and headlights that reduce drag while also reducing wind resistance.

AeroDynamics is basically the study of how air move arround the things which deal with lift, drag, thurst and weight.

To know more about AeroDynamics :

brainly.com/question/10121475

#SPJ4

Given that the time between when the marathon runner changes her velocity and the finish line is t, the acceleration of the runner approaching the finish line is 0.22/t m/s² .

The acceleration of a body is the change in the velocity of a body with time.

Acceleration is a vector quantity as it takes into account the change in velocity as well as the change in the direction of the body.

Hence, a body is accelerating if either or both of these two conditions apply:

Mathematically;

The change in velocity of a body = Final velocity - initial velocity

Change in velocity of the runner = 4.17 - 3.95

Change in velocity of the runner = 0.22 m/s

Time taken for this change = t

Hence;

acceleration = 0.22/t m/s²

Learn more about acceleration at: https://brainly.com/question/460763

#SPJ1

Using the concepts of momentum, we got that 150i-60j is the momentum vector and 162.3Kg-m/sec is the magnitude of the momentum of a 30 kg object.

We know very well that momentum is given by the product of mass and velocity of the object.

In other words P=M. v

But, here velocity is given in 2-D form, means momentum is possible in two different directions.

Therefore, for momentum we just need to multiply the mass of the object with velocity

=>Momentum of the object=M×(5i-2j)

=>                                       p=30×(5i-2j)

=>                                       p=150i-60j

Now, talking about the magnitude we know that magnitude is given by

√(x-component)² + (y-component)²

Therefore, magnitude of momentum (|p|)=√(150)²+(--60)²

=>                                                     |p|=√22500+3600

=>                                                     |p|=√26100

=>                                                     |p|=162.3Kg-m/sec

Hence, for  30 kg object is moving along with the velocity given, the momentum vector is 150i-60j, as well as the magnitude of the momentum for v=5i-2j is 162.3kg-m/sec.

To know more about momentum, visit here:

https://brainly.com/question/24030570

#SPJ4

The buoyant force exerted on the rock is 2 N.

Buoyancy is the upward force exerted by a liquid that opposes the weight of a partially or fully submerged object. In a liquid column, the pressure increases with depth due to the weight of the liquid above. Buoyancy exists whether an object is floating or submerged. The SI unit of buoyancy is Newton. The factors on which buoyancy depends are:

For the given case,

Weight of the rock out of water (W₀) = 5N

Weight of the rock when submerged in water (Wₙ) = 3N

Now what decreases the weight of rock in water? It is the buoyant force exerted by water, which can be can be calculated as:

Fᵇ = W₀ - Wₙ

Fᵇ = 5N - 3N

Fᵇ = 2N

To know more about buoyant force visit:

https://brainly.com/question/7379745

#SPJ4

100 watt light bulb glows brighter than a 50 watt light bulb and  50 watt light bulb is higher resistance than 100 watt bulb.

A circuit's opposition to current flow is measured by its resistance. Resistance is the degree to which a substance obstructs or opposes an electric current. Electron flow is referred to as electric current. To better understand resistance, imagine how difficult it would be for a person to move from one shop to another in a crowded market. Resistors are used in heaters, toasters, microwaves, electric stoves, and a variety of other heating appliances due to their inherent ability to generate heat when conducting current. When electricity is passed through a metal filament in a light bulb, a very high temperature is created from the resistance, which causes the metal filament to glow white-hot. The ohm (), which represents resistance, is denoted by the letter R.

Learn more about resistance here:

https://brainly.com/question/11431009

#SPJ4

Answer:

Explanation:

Discussion

The ones that are certain are

If you have a normal, and the player slides into 2nd, and stops (which he must before he is tagged), then there must be friction involved. There must be gravity, or he would keep going up.

I don't think there is tension. There might be some Air Resistance, but that force is very tiny. Don't be surprised if you answer includes Air Resistance, but I won't try it to begin with.

If it takes an object 3.5 seconds to make one revolution,  its frequency is 0.286 Hz.

The number of vibrations counted per second is called frequency. A wave is a group of vibrations that are referred to as energy. The bottom node is known as the crest, and the top node is known as the trough.

The frequency of an alternating current is the number of full cycles per second. The hertz, also known as Hz, is the accepted unit of frequency. The frequency of a current is 1 Hz if one cycle is completed per second; 60 cycles per second equals 60 Hz.

Frequency = 1/t

Frequency = 1/3.5

Frequency = 0.286 Hz

If it takes an object 3.5 seconds to make one revolution,  its frequency is 0.286 Hz

To learn more about frequency refer to the link:

brainly.com/question/5102661

 #SPJ1

An experiment that I could do to measure the horsepower I could develop for a long period of time can be "Riding a bike over a straight path".

What is horsepower?

Horsepower can be defined as the unit of measurement of power, or the rate at which work is done. There are many different standards and types of horsepower. In order to calculate horse power we will use the following method ;

The term Horsepower was invented by James Watt. It is a unit power that compares the power of a machine to the horse muscle power, steam engine power output compared to the power of draft horses. Now it is used in piston engines, electric motors, turbines and other machinery.

One Horsepower equals to 33,000 lb. ft/min.

To know more about Horsepower from the given link

https://brainly.com/question/28776651

#SPJ4

D is the correct response because, although the car's speed won't change, its direction of travel will.

The car's acceleration is zero because it is driving at a constant speed of 20 meters per second. A further definition of force is the sum of mass and acceleration. Additionally, because there is no acceleration, there is no net force acting on the vehicle. For instance, the car might be round a corner at a steady speed. The speed will remain the same, but the car will change the direction it is moving.

The complete question is- car is travelling north at a constant speed of 20 m/s. A force is applied directly east on the car. The motion of the car will be change in which of these ways? A) The speed of the car will increase. B) The speed of the car will decrease. C) The speed will increase, and the car will change the direction it is moving. D) The speed will remain the same, but the car will change the direction it is moving.

Learn more about acceleration here-

https://brainly.com/question/12550364

#SPJ4

Other forms of electromagnetic radiation you think could be ionizing are x-rays and gamma rays.

Ionizing radiation, including nuclear radiation, consists of subatomic debris or electromagnetic waves which have sufficient strength to ionize atoms or molecules by using detaching electrons from them.

Ionizing radiation is a shape of power that acts by using casting off electrons from atoms and molecules of materials that include air, water, and dwelling tissue. Ionizing radiation can journey unseen and bypass these materials. whilst ionizing radiation interacts with cells, it is able to purpose damage to the cells and genetic fabric (i.e., deoxyribonucleic acid, or DNA). If now not properly repaired, this damage can result in the death of the mobile or probably dangerous adjustments in the DNA (i.e., mutations.

Learn more about ionizing radiation here:-https://brainly.com/question/17095776

#SPJ4

Magnitude of the car's acceleration is 3.5 m/s²

Given:

Mass of car = 1,000 kg

Net force applied by car = 3,500 N

How to find the acceleration of the car?

Formula:

Net force = Mass × Acceleration

So,

3,500 = 1,000 × Acceleration

Acceleration = 3,500 / 1,000

Acceleration = 3.5 m/s²

Therefore, the acceleration found from the formula is 3.5 m/s².

To learn more about acceleration , click on the link below

https://brainly.com/question/24589431

#SPJ1

The rate at which water flow through the pipe is 12.83 kg/s.

Bernoulli's theorem, is based upon law of conservation of energy. Equalize the total energy (pressure energy, potential energy, and kinetic energy) of a flowing liquid at different points flowing under a constant pressure difference. Bernoulli's equation states that points 1 and 2 are on the streamline, the liquid has a constant density, and the flow is stable with no friction.

D₁ = 10 cm

D₂ = 5 cm

P₁ = 8×10⁴ Pa

P₂ = 6×10⁴ Pa

Let's apply Bernoulli’s equation for the wide and reduced part of this pipe:

P₁+ ¹/₂ρυ₁² = P₂ + ¹/₂ρυ₂²

Now, apply continuity equation:

A₁v₁ = A₂v₂

(D₁²π/4) v₁ = (D₂²π/4) v₂

D₁² v₁ = D₂² v₂

v₂ = (D₁/ D₂)² v₁

v₂ = (10/ 5)² v₁

v₂ = 4 v₁

Now,

P₁+ ¹/₂ρυ₁² = P₂ + ¹/₂ρ4υ₁²

P₁+ ¹/₂ρυ₁² = P₂ + 8ρυ₁²

P₁ - P₂ = 8ρυ₁² - ¹/₂ρυ₁²

P₁ - P₂ = 15/2ρυ₁²

Substitute the values in above equation:

8×10⁴ - 6×10⁴ = 15/2×1000υ₁²

υ₁ = 1.63 m/s

So, volume flow rate is:

ρA₁v₁ = ρ(D₁²π/4)v₁

= 1000×(10²×3.14/4)×1.63

= 12.83 kg/s

To know more about Bernoulli’s equation visit:

https://brainly.com/question/6047214

#SPJ4

0.072 J is the work would the spring take to set the object into an oscillation with amplitude 0.02 m

A periodic variable's amplitude is a gauge of its change over a single period. A non-periodic signal's magnitude in relation to a standard value is its amplitude. There are several ways to define amplitude, and they are all dependent on how much the extreme values of the variable deviate from one another.

The stiffness of the spring is how we determine spring constant. In other words, we can define the spring constant as the force used to produce the specified displacement when the spring's displacement is one unit. It follows that a spring's spring constant will increase with increasing spring stiffness.

Now to calculate the work done by spring we use the Hookes’s law

F=kx

Where F is the force required

K is the spring constant

X is the amplitude or distance

So F=kx

F=180x0.02

F=3.6 N

Now to calculate work :

Work = Force × Distance.

Work=3.6 N x0.02m

Work =0.072 J

Hence, 0.072 J is the work would the spring take to set the object into an oscillation with amplitude 0.02 m

To know more about the spring constant visit

https://brainly.com/question/14670501

#SPJ4

Scope quality is it most accurate to say that einstein's theory has based on this brief description.

According to Einstein's theory of relativity, the curvature of space and time is what causes what we experience as the gravitational force. This is the fundamental tenet of Einstein's theory of general relativity, which is frequently encapsulated in the sentence: "Matter instructs spacetime to curve, and curled spacetime instructs matter to move." Based on Einstein's astounding discovery that light always moves at a constant speed, regardless of how fast you're moving when you measure it, the theory, which revolutionized our understanding of time and space, was developed. Light in the quantum realm. The photons that make up light, or photons, are tiny energy packets with wavelike characteristics, as demonstrated by Einstein's quantum theory of light. In this theory, Einstein also described the process by which electrons are released from metals after being struck by lightning.

Learn more about einstein's theory here:

https://brainly.com/question/3202394

#SPJ4

The volume of the gas at the given conditions will be 26.6 ML.

By Ideal Gas Law we know that

[tex]\frac{P1 V1}{T1}[/tex] = [tex]\frac{P2 V2}{T2}[/tex]

In the given question here, P1 = 10 Kg ; V1 = 80 ML ; T1 = 30 ; P2 = 20 Kg ; T2 = 20 Substituting the values in the equation

[tex]\frac{10 X 80}{30\\}[/tex] = [tex]\frac{20 V2}{20}[/tex]

[tex]\frac{80}{3}[/tex] = V2

V2 = 26.6 ML .

To know more about Ideal Gas Law :

brainly.com/question/3637553

#SPJ4

As the angle of inclination increases, the normal force A) increases.

What is normal force ?

In mechanics, the normal force is the component of the contact force normal to the surface in contact with the object. Because normal in this case is used in the geometric sense to mean perpendicular, as opposed to its usual usage meaning "usually" or "usually". A person standing still on the platform would be subject to the gravitational pull toward the core of the Earth, if not for the reaction force from the drag forces of the platform's molecules. This force is called the "normal force".

Normal force is a type of ground reaction force. If a person is standing on a slope and not sinking to the ground or sliding down the slope, the total ground reaction force can be divided into two components:

Vertical forces perpendicular to the ground and frictional forces parallel to the ground.

To learn more about normal force , click the given link ; https://brainly.com/question/1131927

#SPJ4

Answer:

The answer is C.

When Earth is positioned precisely between the Moon and Sun, Earth's shadow falls upon the surface of the Moon, dimming it and sometimes turning the lunar surface a striking red over the course of a few hours which is how a lunar eclipse happens.

When the Moon orbits Earth, the Moon moves between the Sun and Earth. When this happens, the Moon blocks the light of the Sun from reaching Earth. This causes an eclipse of the Sun, or a solar eclipse. During a solar eclipse, the Moon casts a shadow onto Earth.

The interval of time it takes for the team to do a work of 2.35×10⁷ J is 15000 seconds.

Time can be defined as an ongoing and continuous sequence of events that occur in succession, from past through the present, and to the future.

To calculate the time interval the work was done by the team on the wagon, we use the formula below.

Formula:

Where:

From the question,

Given:

Substitute these values into equation 1

Hence, the interval of time it takes to the the work is 15000 seconds.

Learn more about time here: https://brainly.com/question/26046491

#SPJ1

The minimum energy input necessary to place this satellite in orbit is

[tex]\frac{1}{2} m(v^{2} - v_{e} ^{2} ) +GM_{E} m(\frac{1}{r} -\frac{1}{R_{E} } )[/tex]

The mass of the satellite = m

Altitude = h = r

The radius of the Earth = [tex]R_{E}[/tex]

The Mass of the Earth = [tex]M_{E}[/tex]

Speed of the satellite = v

Speed of the Earth = [tex]v_{e}[/tex]

Gravitational Constant = G

The energy at the surface of the Earth will be the sum of the kinetic and potential Energy,

So,

[tex]E_{i} = K.E. +P.E.\\\\ E_{i} = \frac{1}{2} mv_{e} ^{2} -\frac{GM_{E} m}{r}[/tex]

Also, Energy in orbit,

[tex]E_{i} = K.E. +P.E.\\\\ E_{i} = \frac{1}{2} mv^{2} -\frac{GM_{E} m}{R_{E} }[/tex]

Now, The change in energy is the minimum energy required to place this satellite in orbit,

Then, the Change in Energy =

∆E [tex]= \frac{1}{2} m(v^{2} - v_{e} ^{2} ) +GM_{E} m(\frac{1}{r} -\frac{1}{R_{E} } )[/tex]

To read more about energy, visit https://brainly.com/question/1932868

#SPJ4

An elastic cord with natural length of 80 cm stretched to 82.5 cm when an additional 4 kg mass attached. The spring constant of the cord is 1600 N/m

According to the Hooke's Law, the force applied on a string is directly proportional to the length of extension ( or compression).

F = kx

Where:

F = applied force

k = spring constant

x = length of extension/compression

Data given from the problem:

Natural length = 80 cm

The length of stretch when an additional 4 kg mass added = 82.5

Hence,

x = length of extension = 82.5 - 80 = 2.5 cm = 2.5 x 10⁻² m

The force = 4 x 10 = 40 N

Hence, the spring constant:

k = F / x = 40 / (2.5 x 10⁻²) = 1600 N/m

Complete question:

an elastic cord is 80. cm long when it is supporting a mass of 10. kg hanging from it at rest at rest. when an additional 4.0 kg is added, the cord is 82.5 cm long. hint: 4 kg stretches the cord 2.5 cm!!

a. What is the spring constant of the cord?

Learn more about Hooke's Law here:

https://brainly.com/question/22712638

#SPJ4

The situation is correctly described as Electrical Energy is transformed into mechanical energy.

Recalling the working of a fan, i.e. as the circuit is closed, the electrons start flowing in the wires, producing current and hence the current reaches the fan, which rotates due to the magnets in it. Hence the Electrical energy is transformed into Mechanical Energy which is the kinetic energy produced due to rotation of wings of fan.

To know more about The Working Mechanism of Fan :

brainly.com/question/16182853

#SPJ4

The torque required to give the object an angular acceleration of 1.5 rad/s² is 1.5 Nm.

Objects that move in a translational manner use Newton's II law  (∑F = ma)and objects that move in a rotational manner also use the same concept of Newton's laws, but the quantity use rotational quantity . Then, Newton's Second Law for objects that move in a rotational manner or move in a circle uses the formula:

τ = (the moment inertia) x (the angular acceleration of the object)

With,

τ =  is the total torque acting on the object (Nm)

I = is the moment of inertia of the object (kgm²)

α = is the angular acceleration of the object (r4d/s²)

So, the required torque is:

τ = (1.00 kgm²) (1.5 r4d/s²)

= 1.5 Nm

#SPJ4

Answer:

about 19.49J

Explanation:

Work = F × D × Cosine(θ)

Substitute values :D:

Work= 15N x cos 30 degree x 3m x cos 30

Work= 7.5 x 3 x cos 30

Work= about 19.49 joules

Copernicus influenced Newton as the Copernican Revolution was brought to a close by Sir Isaac Newton's Philosophiae Naturalis Principia Mathematica.

Copernicus, the father of modern astronomy, was a Polish astronomer and mathematician. He was the first European scientist to propose the heliocentric theory of the solar system, which states that Earth and other planets revolve around the sun.

By developing the heliocentric theory of Earth's relationship to our Sun, Nicolaus Copernicus altered how educated people saw the world. The heliocentric theory, which is now widely accepted, states that Earth and the other planets revolve around the Sun.

His laws of planetary motion and universal gravitation were developed to explain the presumed motion of the heavens by asserting a gravitational force of attraction between two objects.

Learn more about Newton on:

https://brainly.com/question/25545050

#SPJ1

Answer:

a) 20.65kg

b)4.7rad

Explanation:

which best describes the field of physics the study of matter and energy

physics, science that deals with the structure of matter and the interactions between the elemental constituents of the observable universe. the scope of study envelops not as it were the conduct of objects beneath the activity of given forces but the nature and root of gravitational, electromagnetic, and nuclear force fields. In simple words, physics is characterized as the science of matter, movement, and energy. Its laws are regularly expressed with economy and accuracy within the language of science.

to know more about physics refer to the link https://brainly.com/question/28600368?referrer=searchResults.

#SPJ4