Taking the allowable design stress for aluminium as 90 N/mm². The estimated plate thickness required at base of tank is 0.1612m.
What is stress?Stress is a force per unit area that occurs in materials as a result of external forces, uneven heating, or permanent deformation. It is used in physical sciences and engineering to accurately describe and predict the behavior of elastic, plastic, and fluid materials. A stress is defined as the product of a force divided by an area.
There are numerous types of stress. Shear stress is caused by forces that are parallel to and lie in the plane of a cross-sectional area of the material, as opposed to normal stress, which is caused by forces that are perpendicular to the area.
Learn more about stress
https://brainly.com/question/26108464
#SPJ1
what is the limited approach boundary distance for an exposed fixed circuit part on a 480y/277-volt distribution panel?
The limited approach boundary distance for an exposed fixed circuit part on a 480y/277-volt distribution panel is 3'6".
What is an exposed fixed circuit?An exposed Fixed Circuit part is, a bare conductor or another circuit component that is stationary and will not move. This is the most often used Limited Approach Boundary value. Exposed Movable Conductor - A bare conductor that can move (e.g., an overhead transmission line conductor).
The limited approach boundary distance for an exposed fixed circuit part on a 480y/277-volt distribution panel is 3 feet 6 inches, which indicates that persons and objects should not go any closer to live electrical parts than this distance in order to avoid electrical shock or another injury.
Learn more about fixed circuits;
https://brainly.com/question/15256538
#SPJ1
you perform 100 j of work on a refrigerator that extracts heat from a cold reservoir and dumps heat into a hot reservoir. the amount of heat dumped into the hot reservoir must be
With 100 J of heat available from the first law of thermodynamics, we would dump it into the hot reservoir.
What exactly is the first thermodynamics law?We are aware that the study of heat transfer falls under the purview of thermodynamics. Heat is a factor that could raise an object's temperature. As a result, heat can also be referred to as a type of energy that results from the temperature differential between the things.
The heat engine reservoir is what?A heat engine is a device that uses a heated body as a reservoir and transfers heat there from to perform work. A small amount of heat is discharged toward the sink (cold body).
To know more about reservoir visit:-
https://brainly.com/question/26888545
#SPJ4
Which of the following applies to brake fluid?
A) Brake fluid is a petroleum based fluid.
B) Brake fluid standards are set by each manufacturer.
C) Brake fluids cannot be mixed.
D) All of the above.
From the list given, the option that applies to brake fluid is: "Brake fluids cannot be mixed." (Option C)
What is Brake Fluid?Brake fluid is a specialized liquid that is made from silicone or glycol. The petroleum fractionating technique does not produce brake fluid. In current autos, three types of braking fluid are routinely used: DOT 3, DOT 4, and DOT 5.
It is to be noted that when the brakes are applied, brake fluid is a type of hydraulic fluid that is used in hydraulic braking systems to convert force into pressure and bring the vehicle to a full stop.
Learn more about Brake Fluid:
https://brainly.com/question/12459874
#SPJ1
Which of the following statements about critical path method (CPM) is true?
A. It is an example of a variable time project scheduling method.
B. It is well suited when activity times are expected to vary.
C. It is well suited when activity times are fairly constant and can be reduced by spending more money.
D. It is well suited for R&D projects and for scheduling computer systems.
Answer: C. It is well suited when activity times are fairly constant and can be reduced by spending more money.
The statement about the critical path method (CPM) that is true is: " It is an example of a variable time project scheduling method.." (Option A)
What is the critical path method and why is it important?The critical path is defined by project managers as the process when it comes of dependent tasks in a project. Project managers may more readily prioritize work, create realistic timelines, maintain projects on budget, and avoid or offset delays by identifying the essential route.
The key variables for scheduling are
Task Timelines. This is the expected time required to execute a job using available resources.
There are also Parallel Tasks. These are the tasks that can be accomplished at the same time. Then there are preceding Tasks. These are the activities that must be accomplished before proceeding to other, dependent tasks.
Learn mroe about the critical path method:
https://brainly.com/question/24227953
#SPJ1
A list of 16 issues that led to incorrect formulations in Tuncey Bayrak's jam manufacturing unit in New England is provided below:1. Incorrect measurement2. Antiquated scales3. Lack of clear instruction4. Damaged raw material5. Operator misreads display6. Inadequate cleanup7. Incorrect maintenance8. Inadequate flow controls9. Variability in scale accuracy10. Equipment in disrepair11. Technician calculation off12. Jars mislabeled13. Temperature controls off14. Incorrect weights15. Priority miscommunication16. Inadequate instructions** Create a fish-bone diagram and categorize each of these issues correctly, using the 4 m's method. **
A fishbone diagram, as the name implies, is a representation of a fish skeleton.
Underlying problems of the Fish head:
The underlying problem is represented by the fish's head (facing right), and the causes are represented by the bones of the skeleton; the ribs branch off the back and represent major causes, while sub-branches represent root causes.
The 4M method identifies and groups causes that have an impact on a specific effect. The 4M categories (Material, Method, Machine, and Man) are frequently used in Kaoru Ishikawa's Cause-Effect
What is a Fishbone Diagram ?
A fishbone diagram is a cause-and-effect discovery tool that assists in determining the cause(s) of defects, variations, or failures in a process.
In other words, it aids in the breakdown of root causes that may contribute to an effect in successive layers.
A fishbone diagram, also known as an Ishikawa diagram or cause-and-effect analysis, is one of the primary tools used in root cause analysis.
To know more about Diagram, visit: https://brainly.com/question/24457739
#SPJ4
Technician a states that the aim of thread repair is to restore the thread to a condition that restores the fastening integrity. Technician b states that thread repairs can only be performed on internal threads. Who is correct?.
Both the Technician A and B are correct. Because the statement they have provided are true in both cases.
Who is a technician?Technicians are highly qualified individuals who primarily use technology in a variety of industries. They are familiar with the technical details of the different things they work with. They frequently use electricity or modern technology in their work.
Construction of tools or materials pertaining to a technician's area of study may be assigned to them. To make sure the equipment functions properly, they may also be tasked with performing diagnostics and other maintenance tasks. In the event of issues, technicians may also be required to carry out simple repairs. It's crucial for technicians to have sound analytical and decision-making abilities.
Learn more about technicians
https://brainly.com/question/29383879
#SPJ1
Analyse and determine the drag on a small circular disk of 0.01 ft diameter moving 0.01 ft/s through oil with a specific gravity of 0.87 and a viscosity 10,000 times that of water. The disk is oriented normal to the upstream velocity.
The drag of the disk is 3.38 X 10^4.
What is drag?
Drag is a force that opposes any object's relative motion with respect to a surrounding fluid in fluid dynamics. This might be present between two liquid layers or between a liquid and a solid surface.
The resistance to motion of a body through a fluid, such as water or air, is known as a drag force. The direction of the incoming flow velocity is opposed by a drag force. This is the relative speed of the fluid and the body.
Solution Explained:
Given,
Specific gravity(sg) = 0.87
Diameter = 0.01ft
Density of Oil (P) = [tex]sg_{ph20} = 0.87 X 1.94 = 1.6878 \frac{sl}{ft^3}[/tex]
Since the viscosity is 10000 times that of water, the Reynold number is
[tex]R_{E} = \frac{PvD}{meu} = \frac{1.6878 X 0.01 X 0.01}{0.234} = 7.21 X 10^-4[/tex]
Since RE < 1, the drag coefficient for normal flow is given as:
[tex]CD = \frac{24.4}{R_{E}} = \frac{24.4}{7.21 X 10^-4} = 3.38 X 10^4[/tex]
To learn more about drag, use the link given
https://brainly.com/question/28764812
#SPJ4
2 I. Choose the correct answer 1. Which one of the following is true about psychology A. The scientific study of human behavior B. The scientific study of mental process C. Focuses on individuals behavior. D. The study of personality F. All E. A and B 2. The term psychology comes from A. Germany B, Greek 3. Psychology is C. American D. European F. All A. Relies on investigating questions B. Use arrange of techniques to study the human mind and behavior C. Emerged from biology and philosophy D. All E. A and B 4. Which one of the following is not true about dependent variable A. It is determined by independent variables B. Not depended on independent variables C. It has both positive and Negative relationship with independent variables. D. All 5. Which one of the following is not true about correlation research A. It determines how much of difference exists between variables B. It can establish cause and effect C. A and B 6. Which one of the following is true about psycho analytic psychology? A. Our conscious mind is only tip of iceberg. B. The author was Sigmund Freud C. The focus is on unconscious mind
Answer:
psychology is the scientific study of human behavior and mental processes
Psychology is the scientific study of human behavior and mental processes.
What is Psychology?
The study of human thought, behavior, development, personality, emotion, motivation, and more is covered by the large and complex area of psychology.
Different subfields and specialization areas have consequently emerged.
This specialized field, which is connected to clinical psychology and psychotherapy, focuses on the study and treatment of a wide range of mental diseases. Biopsychology (sometimes known as biological psychology) is the study of how biological processes affect the mind and behavior.
Therefore, Psychology is the scientific study of human behavior and mental processes.
To learn more about Psychology, refer to the link:
https://brainly.com/question/13044291
#SPJ2
given that an arraylist named a with elements of type integer has been declared, assign 3 to its first element.
Assign the value 3 to the first element of the arraylist a, which has been declared to contain items of the type integer.
Integers include the number zero (0), a positive natural number, and a negative integer represented by a minus sign. The negative numbers are the inverse additions of the comparable positive numbers. In mathematical notation, the boldface Z or blackboard bold displaystyle mathbb Z mathbb Z is widely used to denote the set of numbers. The displaystyle "mathbb" is used to show the set of all natural numbers, the set of all rational numbers, the set of real numbers, and the set of all rational numbers. The set of all natural numbers, the set of all rational numbers, and the set of all real numbers are also shown. Z is countably infinite, much like the natural numbers, according to Displaystyle Mathbb.
Learn more about integer from
brainly.com/question/929808
#SPJ4
two technicians are discussing an obd ii vehicle that has a flashing check engine light. technician a says there is problem with the engine lubrication or cooling system and the vehicle must not be driven, otherwise serious engine damage will occur. technician b says there is a severe ignition misfire and the driver should reduce speed and engine load and have the vehicle serviced as soon as possible. who is correct?
Technician B is correct because ignition misfire is most probably the reason a flashing check engine light.
What is ignition misfire?Fuel is ignited in the engine's combustion chamber by the ignition system. The engine will misfire on one or more cylinders if the system isn't functioning properly. However, this isn't always the case. Typically, only one cylinder is impacted. Additionally, because the components of the ignition system gradually wear out and mild misfires can be difficult to detect, you might have ignition misfires without even realizing it (although your Check Engine Light may come on, seemingly for no reason).
Misfiring has a variety of potential causes, including issues with your ignition system. It's critical to have an experienced mechanic diagnose and fix any engine misfiring issues.
Learn more about ignition system
https://brainly.com/question/14094081
#SPJ4
Suppose that your car will not start. To determine whether the battery is faulty, you turn
on the light switch and find that the lights are very dim, indicating a weak battery. You
borrow a friend’s car and a set of jumper cables. However, how do you connect his
car’s battery to yours? What do you want his battery to do?
Note that to connect your car's battery to your friend's car using jumper cables, you should follow these steps:
Allow the two automobiles to be near to each other but not to touch.Check that both automobiles are switched off and that the keys are not in the ignition. Open the hoods of both vehicles.Find the batteries in both vehicles. The positive terminal (generally denoted by a "+") is usually bigger than the negative terminal.Connect the positive terminal of your friend's battery to one end of the red jumper cable. Connect the other end of the red jumper cable to the positive connector of your vehicle's battery.Connect the negative terminal of your friend's battery to one end of the black jumper cable.Attach the other end of the black jumper cable to an unpainted metal surface on your automobile, such as an engine block bolt. This will assist in grounding the circuit and preventing sparks.What are the signs of a faulty battery?If your engine cranks slowly, like it's tougher to start on chilly mornings, start inconsistently, or there's no sound or interior lights when you try to start, consider a failing battery, a loose or corroded connection, or an electrical draw.
To make sure your battery lasts:
Short travels should be avoided. Short automobile journeys restrict your car's battery from fully charging.Keep your battery securely attached.When you exit the car, turn off all lights.Maintain corrosion control.Check your battery frequently.When the engine is turned off, do not utilize electronics.Learn more about Battery:
https://brainly.com/question/23716491
#SPJ1
If you are creating an artificial cell and you want this cell to be capable of the greatest sensitivity to an applied signal, which would be the most useful?.
The most popular technique for creating artificial cells is cell encapsulation.
What is artificial cell?Artificial cell is defined as a manufactured particle that replicates one or more biological cells' functions. A type of artificial structures with physiologically active components is referred to as "artificial cells."
In order to create encapsulated cells, liquid cell suspensions are often divided into controlled-size droplets, which are quickly hardened or gelled to offer additional stability. They can be utilized as biomimetic systems to analyze the dynamics of cells with little interference from cellular complexity, to study and comprehend the characteristics of biological cells,
Thus, the most popular technique for creating artificial cells is cell encapsulation.
To learn more about artificial cell, refer to the link below:
https://brainly.com/question/28948682
#SPJ1
a developer ordered several truckloads of soil to be used in a new housing project for backfill to replace ground removed by excavation for construction. used to brace a structure (especially a foundation or footings). . his most probable intended use would be
a developer ordered several truckloads of soil to be used in a new housing project for backfill to replace ground removed by excavation for construction. used to brace a structure (especially a foundation or footings). His most probable intended use would be to fill in excavations or around foundation walls.
Who is a developer?
In the construction industry, a project developer is a professional who oversees the operations of a project by conducting research and developing plans that best meet the needs of the project. A developer is typically thought of as someone who develops land through construction and who, as a result, becomes an owner of the developed land.
To create project activities, schedules, and regular project progress reports, the developer will typically collaborate with the project manager.
To learn more about a developer, use the link given
https://brainly.com/question/28000992
#SPJ4
if roberts electronics finds that the average total cost of its radar detectors and the marginal cost of its radar detectors are both $85, then:
-its marginal costs are falling
-average total cost is at its maximum
-average total costs are rising
-demand is elastic
-average total cost is at its lowest level
If roberts electronics finds that the average total cost of its radar detectors and the marginal cost of its radar detectors are both $85, then the average total cost is at its lowest level.
What is a Radar Detectors?
If you own a car, enjoy driving, or simply want to save money, a radar detector is a must-have device. A radar detector and a dash camera can work together. While they each serve different functions, they both work together to protect you and your vehicle.
A radar detector's purpose is to save you from speeding tickets by detecting police radar waves that officers use with radar guns to measure the speed of your vehicle.
When a radar detector detects these radar waves, it will alert you both audibly and visually, allowing you to slow down within the speed limit in good time. The idea is that a single speeding ticket should be enough to cover the cost of the radar detector.
To know more about Radar Detectors, visit: https://brainly.com/question/15896467
#SPJ4
What component in the solar cell provides electrons to replace the electrons released by the dye?.
The component in the solar cell that provides electrons to replace the electrons released by the dye is "a layer of graphite"
What is the explanation for the above process?A layer of graphite will operate as a counter electrode at the glass/electrolyte border, delivering electrons to the solution to replace these electrons that go on to the FTO glass.
They are reintroduced into the cell on a metal electrode on the rear, commonly known as the counter electrode, after passing through the external circuit and flowing into the electrolyte. The electrons are subsequently returned to the dye molecules by the electrolyte, which regenerates the oxidized dye.
PV cells make use of a variety of semiconductor materials. When exposed to light, the semiconductor absorbs the energy and converts it to negatively charged particles in the material known as electrons. This increased energy permits electrons to flow as an electrical current through the material.
Learn more about Solar Cells:
https://brainly.com/question/12053447
#SPJ1
I need help solving questions.
Answer:
what's the question that you want us to answer.
consider the finite state machine below to answer the following questions. what is the least number of flip flops required to design this fsm?O 5:4 choice O 5:9 choice O 5:16O 5:18O 5:none of the above
If we reduce states, we can design FSM with only 2 Flip Flops instead of the required 4 Flip Flops for designing the above FSM. Since nothing is mentioned here by default, we decrease the number of states.
Therefore, the correct response is: 2 flip flops or None of the above.
What is FSM?A finite-state machine (FSM), also known as a finite automaton (FSA, plural: automata), a finite automaton, or simply a state machine, is a type of mathematical model for computation. It is an abstract machine that only ever has a single possible state at a time out of a finite set.
The FSM can transition from one state to another in response to some inputs; the transition between two states is known as a change. Lists of states, an initial state, and the inputs that cause each transition are used to define FSMs. Deterministic and non-deterministic finite state machines are the two types of finite state machines. Equivalent to any non-deterministic finite-state machine, a deterministic one can be built.
Learn more about finite-state machine
https://brainly.com/question/13576930
#SPJ4
The purpose of the idler gear is to either __________ of the driven gear or transfer power to a location which is farther from the driver shaft.
The purpose of the idler gear is to either change the direction of rotation of the driven gear or transfer power to a location which is farther from the driver shaft.
What is an idler gear?A motion is produced when two gears are placed next to one another and move in opposing directions. A third gear, called an idler gear, is used between the two gears when they both need to move in the same direction. The only thing it changes is the direction in which the second gear spins, and it only transfers motion from one gear to the other.
The "driven gear" accepts motion, and the "driving gear," which transmits motion, are the gears that the idler connects. As if the idler gear weren't there, the gear ratio between the driving and driven gears is calculated in the same way.
Learn more about driven gear
https://brainly.com/question/12513059
#SPJ1
According to NEC article 110 unused knockouts and other openings in electrical boxes and cabinets are required to be ___.
Select one:
a. marked
b. closed
c. ventilated
d. listed
According to NEC article 110 unused knockouts and other openings in electrical boxes and cabinets are required to be (b) closed.
What is an electrical box?
An enclosure that houses electrical connections is called a junction box. In addition to shielding individuals from unintentional electric shocks, junction boxes safeguard the electrical connections from the elements. Junction boxes, commonly referred to as electrical boxes, protect wire connections. They contribute to the prevention of short circuits, which can result in fires. According to electrical codes, every electrical device and its wiring connections must be contained inside an authorized electrical box.
To learn more about an electrical box, use the link given
https://brainly.com/question/29304605
#SPJ4
In the following function prototype, how many parameter variables does this function have?
int myFunction(double, double, double);
a. 1
b. 2
c. 3
d. cannot tell from the prototype
The function prototype you provided has 3 parameter variables.
Explanation in Detail:
In a function prototype, the variables listed in the parentheses after the function name are the parameter variables for the function. These variables represent the values that will be passed to the function when it is called. In this case, the function has 3 parameter variables, all of which are of type double.
Therefore, the correct answer is C) 3.
It is important to note that a function prototype only provides information about the number, type, and order of the parameters that a function expects to receive, but it does not provide any information about the function's implementation or behavior. For example, the function prototype does not tell us what the function does with the parameter variables or what it returns.
To know more about parameter variables, visit: https://brainly.com/question/28557876
#SPJ4
If you are creating an artificial cell and you want this cell to be capable of the greatest sensitivity to an applied signal, which would be the most useful?.
Artificial cells have received a lot of attention as potential replacements for natural cells. There are numerous types of artificial cells, each with its own definition.
What is an Artificial cells?
Artificial cells are materials that have been engineered to mimic some of the properties of cells, such as surface characteristics, shapes, morphology, or a few specific functions.
These artificial cells have applications ranging from medicine to the environment, and they may be useful in developing theories about the origin of life. However, even the most basic unicellular organisms are extremely complex, and the synthesis of living artificial cells from inanimate components appears to be extremely difficult.
Nonetheless, recent progress in the creation of artificial cells ranging from simple protocells and synthetic cells to cell-mimic particles suggests that the creation of living life is no longer an impossible goal.
To know more about synthesis, visit: https://brainly.com/question/27606150
https://brainly.com/question/29706208
can a fiber reinforced composite behave like a particle reinforced composite? explain why or why not.
No, a fiber-reinforced composite cannot behave like a particle-reinforced composite.
This is because fiber reinforcement is typically achieved by adding fibers made of glass, carbon, or other materials to a polymer matrix. Particle reinforcement, on the other hand, is achieved by adding particles of ceramic or metal to a polymer matrix. The two components have different properties and behave differently in different applications.
Fiber-reinforced composites are materials made of a matrix and a reinforcing fiber. The matrix is usually a polymer, a metal, or a ceramic, while the reinforcing fibers are typically glass, carbon, or aramid fibers.
For more questions like Fiber click the link below:
https://brainly.com/question/14266265
#SPJ4
in order to determine if the delivery system is adequate for manual firefighting, what must the engineers calculate?
the wire and bar drawing process involves pulling metal through an opening in a die in which the metal takes on the shape of the die opening.
When a wire (or bar) is drawn through a die opening, the cross section of the metal is reduced. This process is known as wire drawing (or bar drawing).
By hand, how is wire drawn?Hand pulling is used to draw silver wire. drawing thicker silver wire with a crank. Wire drawing is a metalworking technique used to shrink a wire's cross section by dragging it through just one hole.
How do you sketch metal?By dragging the metal through a die to shape and size it into the desired wire, rod, tube, or other part, metal drawing is a cold working operation.
To know more about wire drawing visit :-
https://brainly.com/question/27735578
#SPJ4
3.what information is typically provided on the grade stamp of visually graded lumber? explain, with the help of an example of a typical grade stamp.
The mill identification number must be included on a lumber grade stamp.
What is stamp-grade lumber?A grade stamp on the lumber will be looked for when a building is inspected. The inspector can only identify the quality of the wood used in the structure based on this grade stamp. Given that all construction standards call for it, the grade stamp is very significant to building inspectors.
How is timber grade determined?The quantity of transparent surface area on a board's side with the worst appearance determines its grade (with hardwoods one side will look better than the other). Long and wide, with a significant portion of its area defective, a higher grade board. -free
To know more about grade stamp visit:-
https://brainly.com/question/5881426
#SPJ4
through friendship we can overload the << operator for the iostream library allowing the programmer to define how an object interacts with cout. True/False
False, Through the buddy function, unary and binary operators can both be overloaded. The friend function also allows for operator overload.
Which operator from the list below cannot be overloaded?The sizeof operator, typeid, Scope resolution (::), Class member access operator (.), Ternary, or conditional operator (?:) are some operators that cannot be overloaded. These operators cannot be overloaded because it would be syntactically impossible and could lead to serious programming errors.
Which of the following features is utilized in default argument and function overloading?Both of the aforementioned types provide function overloading, which is the fundamental idea of polymorphism.
To know more about operators visit:-
https://brainly.com/question/20916293
#SPJ4
3. The scale of the blueprint tells us the ________ of drawing to real space?
Boundary
Proportion
Weight
or
None of the above
The scale of the blueprint tells us the boundary of the drawing to real space. The correct option is a.
What is the scale of the blueprint?It is a photographic print in white on a bright blue background or blue on a white background, particularly useful for copying maps, mechanical drawings, and architect's designs
The plan of the construction is a project prediction that is slightly auto cad. The scale factor provides information on the dimensions and measurements of things represented by smaller copies in maps, blueprints, scale drawings, and scale models. The scale tells us how much actual length some length on the scale graphic represents.
Therefore, the correct option is a, Boundary.
To learn more about the scale of the blueprint, refer to the link:
https://brainly.com/question/8887076
#SPJ1
Computer science question
Using the knowledge of computational language in python it is possible to write a code that function called foo(), which is passed a value, and returns a value.
Writting the code:function foo
parameter p1 //which is equal to "JOHN PAUL SMITH" in this case
if (p1 has more than 1 occurrence of " " [i.e. more than 1 spaces])
ReturnValue = everything after the 2nd " " in p1
else if (p1 only has 1 occurrence of " " [i.e. 1 space])
ReturnValue = everything after the 1st " " within p1
else //[i.e. no spaces]
ReturnValue = p1
endif
endif
return ReturnValue
See more about python at brainly.com/question/18502436
#SPJ1
the bellman-ford shortest path algorithm works ____O on graphs with negative edge weights, but not negative edge weight cycles O only on graphs without cycles O on any graph O only on graphs with non-negative edge weights
The bellman-ford shortest path algorithm works on graphs with negative edge weights, but not negative edge weight cycles.
Define an algorithm.
A finite sequence of exact instructions is known as an algorithm in mathematics and computer science. Algorithms are frequently used to solve a class of particular problems or to carry out computations. For carrying out calculations and data processing, algorithms are used as specifications.
A method used to solve a problem or carry out a command is known as an algorithm. Algorithms are precise lists of instructions that, in either software or hardware-based routines, carry out predetermined actions step by step.
To learn more about an algorithm, use the link given
https://brainly.com/question/15217393
#SPJ4
I want to create an Excel workbook to keep track of my spending by month for the year, what would be the best names to give my worksheets?
Answer:
Name them by the month and then end with the date.
Explanation:
For example, Jan 2022. This is naming the month, which you want to have to keep track of spending and then the year clarifies it from past or future years.
Organizing by month is the best and most efficient way to look back and keep track of spending by month of the year.