A three-phase line, which has an impedance of (2 + j4) ohm per phase, feeds two balanced three-phase loads that are connected in parallel. One of the loads is Y-connected with an impedance of (30 + j40) ohm per phase, and the other is connected with an impedance of (60 - j45) ohm per phase. The line is energized at the sending end from a 60-Hz, three-phase, balanced voltage source of 120 √3V (rms, line-to-line).

Determine:
a. the current, real power and reactive power delivered by the sending-end source
b. the line-to-line voltage at the load
c. the current per phase in each load
d. the total three-phase real and reactive powers absorbed by each load and by the

Answers

Answer 1

Answer:

hello your question has a missing information

The other is Δ-connected with an impedance of (60 - j45) ohm per phase.

answer : A) 5A ∠0° ,

               p( real power )  = 1800 and  Q ( reactive power ) = 0 VAR

 B) 193.64 v

C) current at load 1 = 2.236 A , current at load 2 = 4.472 A

 D) Load 1 : 450 watts(real power ) , 600 VAR ( reactive power )

      Load 2 : 1200 watts ( real power ), -900 VAR ( reactive power )

Explanation:

First convert the Δ-connection to Y- connection attached below is the conversion and pre-solution

A) determine the current, real power and reactive power delivered by the sending-end source

current power delivered (Is)  =  5A ∠0°

complex power delivered ( s ) = 3vs Is  

                                                  = 3 * 120∠0° * 5∠0° = 1800 + j0 ---- ( 1 )

also s = p + jQ  ------ ( 2 )

comparing equation 1 and 2

p( real power )  = 1800 and  Q ( reactive power ) = 0 VAR

B) determine Line-to-line voltage at the load

Vload = √3 * 111.8

           = 193.64 v

c) Determine current per phase in each load

[tex]I_{l1} = Vl1 / Zl1[/tex]

     = [tex]\frac{111.8<-10.3}{50<53.13}[/tex] = 2.236∠ 63.43° A   hence current at load 1 = 2.236 A

[tex]I_{l2} = V_{l2}/Z_{l2}[/tex]  

     = [tex]\frac{111.8<-10.3}{25<-36.87}[/tex]  = 4.472 ∠ 26.57° A hence current at load 2 = 4.472 A

D) Determine the Total three-phase real and reactive powers absorbed by each load

For load 1

3-phase real power = [tex]3I_{l1} ^{2} R_{l1}[/tex] = 3 * 2.236^2 * 30 = 450 watts

3-phase reactive power = [tex]3I_{l1} ^{2} X_{l1}[/tex] = 3 * 2.236^2 * 40 = 600 VAR

for load 2

3-phase real power = [tex]3I_{l1} ^{2} R_{l2}[/tex]  = 1200 watts

3-phase reactive power = [tex]3I_{l1} ^{2} X_{l2}[/tex] = -900 VAR

A Three-phase Line, Which Has An Impedance Of (2 + J4) Ohm Per Phase, Feeds Two Balanced Three-phase
Answer 2

The sum of load powers and line losses, 1800 W+ j0 VAR and The line voltage magnitude at the load terminal is 193.64 V.

(a) The impedance per phase of the equivalent Y,

[tex]\bar{Z}_{2}=\frac{60-j 45}{3}=(20-j 15) \Omega[/tex]

The phase voltage,

[tex]\bold { V_{1}=\frac{120 \sqrt{3}}{\sqrt{3}}=120 VV }[/tex]

Total impedance from the input terminals,

[tex]\bold {\begin{aligned}&\bar{Z}=2+j 4+\frac{(30+j 40)(20-j 15)}{(30+j 40)+(20-j 15)}=2+j 4+22-j 4=24 \Omega \\&\bar{I}=\frac{\bar{V}_{1}}{\bar{Z}}=\frac{120 \angle 0^{\circ}}{24}=5 \angle 0^{\circ} A\end{aligned} }[/tex]

   

The three-phase complex power supplied  [tex]\bold {=\bar{S}=3 \bar{V}_{1} \bar{I}^{*}=1800 W}[/tex]  

P =1800 W and Q = 0 VAR delivered by the sending-end source.

 

(b) Phase voltage at load terminals will be,  

[tex]\bold {\begin{aligned}\bar{V}_{2} &=120 \angle 0^{\circ}-(2+j 4)\left(5 \angle 0^{\circ}\right) \\&=110-j 20=111.8 \angle-10.3^{\circ} V\end{aligned} }[/tex]  

The line voltage magnitude at the load terminal,  

[tex]\bold{\left(V_{ LOAD }\right)_{L-L}=\sqrt{3} 111.8=193.64 V(V }[/tex]    

 

(c) The current per phase in the Y-connected load,  

[tex]\bold {\begin{aligned}&\bar{I}_{1}=\frac{\bar{V}_{2}}{\bar{Z}_{1}}=1-j 2=2.236 \angle-63.4^{\circ} A \\&\bar{I}_{2}=\frac{\bar{V}_{2}}{\bar{Z}_{2}}=4+j 2=4.472 \angle 26.56^{\circ} A\end{aligned} ​}[/tex]

 

The phase current magnitude,  

[tex]\bold {\left(I_{p h}\right)_{\Delta}=\frac{I_{2}}{\sqrt{3}}=\frac{4.472}{\sqrt{3}}=2.582 }[/tex]

(d) The three-phase complex power absorbed by each load,

[tex]\bold {\begin{aligned}&\bar{S}_{1}=3 \bar{V}_{2} \bar{I}_{1}^{*}=430 W +j 600 VAR \\&\bar{S}_{2}=3 \bar{V}_{2} \bar{I}_{2}^{*}=1200 W -j 900 VAR\end{aligned}}[/tex]

 

The three-phase complex power absorbed by the line is  

[tex]\bold{\bar{S}_{L}=3\left(R_{L}+j X_{L}\right) I^{2}=3(2+j 4)(5)^{2}=150 W +j 300 VAR }[/tex]

 

Since, the sum of load powers and line losses,  

[tex]\bold {\begin{aligned}\bar{S}_{1}+\bar{S}_{2}+\bar{S}_{L} &=(450+j 600)+(1200-j 900)+(150+j 300) \\&=1800 W +j 0 VAR\end{aligned} }[/tex]

 

To know more about voltage,

https://brainly.com/question/2364325

 


Related Questions

HELP PLS

Which of the following statements about suspensions is TRUE?
a. A suspension contains particles smaller than those of a solution.
b. A suspension cannot be filtered.
c. The large particles in a suspension eventually settle to the bottom of the container.
d. A suspension is a true solution.

Answers

Answer:

I think it might be C.

Explanation:

Answer:

c. The large particles in a suspension eventually settle to the bottom of the container.

Explanation:

The correct statement from the given choices is that the large particles in a suspension eventually settle to the bottom of the container.

A suspension is a mixture made up of small insoluble particles of a solid in a liquid or gas.

They have the following properties:

They settle on standingThe particles do not pass through ordinary filter paperThe particles do no pass through permeable membrane Their particles are visible with the naked eyes.

A strong man and a weak man are trying to carry a ladder . How should they carry it in such a way that the weak person feels less weight of the ladder

Answers

Answer:

The strong person should carry the ladder at the  front end and the weak person should carry it at the back end.

Explanation:

this is because in such a case the strong person has to pull the ladder whereas the weak person at the back end have to push the ladder. In such case it is easier to push because the weak person can use the force of gravity of his own body for pushing the ladde.

However in case of pulling the ladder one has to overcome his own gravity to pull the heavy object

                                                                                                                               

I Hope it help you

Answer:

  weak person: near the end of the ladder

  strong person: nearer the center of the ladder

Explanation:

The closer the strong person is to the center of mass of the ladder, the greater the fraction of the ladder's weight that person will carry. The weak person will feel less weight if the strong person is nearer to the center of mass.

For example, if the strong person is 3/4 of the ladder's length from the end where the weak person is, then the strong person will carry twice the weight the weak person is having to carry. (Assuming the mass is uniformly distributed.)

A person pushes down on a lever with a force of 100 N. At the other end of the lever, a force of 200 N lifts a heavy object. What is the mechanical advantage of the lever?

A. 1/2, because the object will be lifted half the distance
B. -1, because the direction changes
C. 2, because the output force is twice the input force
D. 1, because the same amount of work is done​

Answers

Answer:

Explanation:

C 200÷100=2

Output ÷ Input= MA

a 14n force is applied for 0.33 seconds, calculate the impulse

Answers

Answer:

4.62 N-s

Explanation:

recall that the formula for impulse is given by

Impulse = Force x change in time

in our case, we are given

Force = 14 N

change in time = 0.33s

Simply substituting the above into the equation for impulse, we get

Impulse = Force x change in time

Impulse = 14 x 0.33

= 4.62 N-s

Force=14NTime=0.33s

[tex]\\ \sf\longmapsto Impulse=Force(Time)[/tex]

[tex]\\ \sf\longmapsto Impulse=14(0.33)[/tex]

[tex]\\ \sf\longmapsto Impulse=4.62Ns[/tex]

Energy from the Sun is transferred from the Earth’s surface to the atmosphere, resulting in
atmospheric convection currents that produce winds. How do physical properties of the air
contribute to convection currents?

a -The warmer air sinks because it is more dense than cooler air.
b -The warmer air rises because it is more dense than cooler air.
c- The warmer air sinks because it is less dense than cooler air.
d -The warmer air rises because it is less dense than cooler air.

Answers

Energy from the sun is important so the correct answer is c
Explanation

When the bowling ball has fallen halfway down the building (height = 20 m), it has a speed of 19.8 m/s.
How much potential energy does the bowling ball have?
How much kinetic energy does the bowling ball have?
How much total energy (potential + kinetic) does the bowling ball have?
Of the bowling ball’s total energy, is more in the form of potential or kinetic energy?

Answers

Answer:

I think the answer is 19.8 potential energy

Explanation:

NONE.

According to Newton’s law of universal gravitation, in which of the following situations does the gravitational attraction between two bodies always increase

Answers

Answer:

When the mass increases or when distance between the bodies reduces

Explanation:

According to Newton's law of universal gravitation, the gravitational attraction between two bodies always increase if the mass increases and the distance between the bodies reduces.

The law of universal gravitation states that "the gravitational force of attraction between two bodies is directly proportional to the product of their masses and inversely proportional to the square of the distances between them".

Mathematically;

      Fg  = [tex]\frac{G m1 m2}{r^{2} }[/tex]  

G is the universal gravitation constant

m is the mass

r is the distance

On a winter day a child of mass 20.0 kg slides on a horizontal sidewalk covered in ice. Initially she is moving at 3.00 m>s, but due to friction she comes to a halt in 2.25 m. What is the magnitude of the constant friction force that acts on her as she slides

Answers

Answer:

40 N

Explanation:

According to the scenario, computation of given data are as follows:

Mass (m) = 20 kg

Initially moving (v) = 3

Actual distance (d) = 2.25 m

So, we can calculate friction (f) by using following formula,

f × d = [tex]\frac{1}{2} mv^{2}[/tex]

By putting the value, we get

f × 2.25 = [tex]\frac{1}{2}[/tex] × 20 × [tex]3^{2}[/tex]

f × 2.25 = 10 × 9

f = 90 ÷ 2.25

= 40 N.

A 20.0-N weight slides down a rough inclined plane which makes an angle of 30 degree with the horizontal. The weight starts from rest and gains a speed of 15 m/s after sliding 150 m. How much work is done against friction

Answers

Answer:

[tex]1270.64\ \text{J}[/tex]

Explanation:

m = Mass of object = [tex]\dfrac{mg}{g}[/tex]

mg = Weight of object = 20 N

g = Acceleration due to gravity = [tex]9.81\ \text{m/s}^2[/tex]

v = Final velocity = 15 m/s

u = Initial velocity = 0

d = Distance moved by the object = 150 m

[tex]\theta[/tex] = Angle of slope = [tex]30^{\circ}[/tex]

f = Force of friction

fd = Work done against friction

The force balance of the system is

[tex]\dfrac{1}{2}m(v^2-u^2)=(mg\sin\theta-f)d\\\Rightarrow \dfrac{1}{2}mv^2=mg\sin\theta d-fd\\\Rightarrow fd=mg\sin\theta d-\dfrac{1}{2}mv^2\\\Rightarrow fd=20\times \sin 30^{\circ}\times 150-\dfrac{1}{2}\times \dfrac{20}{9.81}\times 15^2\\\Rightarrow fd=1270.64\ \text{J}[/tex]

The work done against friction is [tex]1270.64\ \text{J}[/tex].

__________ forces are not equal, and they always cause the motion of an object to change the speed and/or direction of an object.

Answers

Answer:

Unbalanced Forces.

Explanation:

Answer:

Unbalanced

Explanation:

Unbalanced forces are not equal and they always cause the motion of an object to change the speed and or direction of the object.

Balanced forces are equal and will not cause the motion of an object to change.

From Newton's law of inertia "an object will continue in its state of rest or of uniform motion unless acted upon by an external force".

The net force for a body with unbalanced forces is greater than zero.

For a body with balanced forces, the net force is zero

Your __________ environment includes the people you spend time with.

Answers

Answer:

social

Explanation:

Your social environment includes the people you spend time with – your family, your friends, classmates and other people in your community.  Your social environment is healthier when you choose friends who show concern for their own health and yours.

A Geiger–Müller tube can be used to detect ionising radiation. The tube is filled with low pressure gas. How does this detect ionising radiation

Answers

Explanation:

the gas will be hit by high energy particles as the radioactive decay happens and the decaying nuclei are breaking apart. these particles energize the gas and cause electrons to move around the orbitals. the flow of electrons is detected by the sensor.

When an object with an electric charge of is from an object with an electric charge of , the force between them has a strength of . Calculate the strength of the force between the two objects if they are apart. Round your answer to significant digits.

Answers

The question is incomplete, the complete question is;

When an object with an electric charge of −7.0μC is 5.0cm from an object with an electric charge of 4.0μC, the force between them has a strength of 100.7N. Calculate the strength of the force between the two objects if they are 1.7cm apart. Round your answer to 2 significant digits

Answer:

865.1 N

Explanation:

F1 = Kq1q2/r1^2 ---------1

F2 = Kq1q2/r2^2 -------2

We have that;

r1 = 5cm

r2 =1.7 cm

F1 = 100.7 N

Comparing equations 1 and 2

F2 = F1r1^2/r2^2

F2 = 100.7N[(5cm)^2/(1.7cm)^2]

F2= 865.1 N

Tim has a house worth $250,000. He has installed a $100,000 aquarium in his basement because he is obsessed with fish. His regular homeowner's insurance doesn't cover home aquariums, so his insurance agent is writing a supplemental policy to help him get the coverage for the aquarium. What is this known as? Question 6 options: an exclusion a rider a deductible a consideration

Answers

Answer:

A rider.

Explanation:

A rider designates a clause or group of clauses added to an initial contract, being an annex to it.  These added clauses are attached to the initial contract, integrating to it and losing the character of an independent document. Therefore, it would then be a piece of writing that is to be treated as part of the main contract. Usually, the purpose of the riders is to include particular clauses for the insured, that is, clauses that are specific to them outside of the company's generic contract.

Answer:

A rider, for plato users

Explanation:

As waves crash into rock along the shoreline, particles of sand, shell, and other materials in the ocean water loosen tiny bits of sediment from the rock. As the waves recede, they carry the sediment away. In this scenario, which process represents weathering, and which process represents erosion?

Answers

Answer:

WEATHERING is represented by the scenario (As waves crash into rock along the shoreline, particles of sand, shell, and other materials in the ocean water loosen tiny bits of sediment from the rock).

Erosion is represented by the scenario (As the waves recede, they carry the sediment away).

Explanation:

A wave is a disturbance which travels through a medium and transfers energy from one point to another. When wind blows over a water body like the ocean, ocean waves are formed. As the generated energy from the wind is transported through the water by the waves, the can hit against rocks on the shores leading to its break down with time. WEATHERING occurs when tiny bit of sediments from rocks are loosened due to the impact of ocean waves.

Erosion can be described as the wearing away of the earth's surface due to the impact of wind, rainfall ( water) or waves. There are different types of erosion which is classified according it's cause of formation.

Wave erosion occurs when sediments such as sand, shell and other materials are carried to the shoreline by ocean waves. This erodes the shore over time as the sediments act like sandpapers.

Which has the most mass?
O The Moon
O A Pencil
O Your teacher.
O Earth

Answers

Answer:

Earth

lol... ....

A 1200 kg truck accelerates from 25 m/s to 53 m/s over a distance of 350 m.

What is the average net force on the truck?

Answers

Answer:

the average net force on the truck is 3744 N.

Explanation:

Given;

mass of the truck, m = 1200 kg

initial velocity of the truck, u = 25 m/s

final velocity of the truck, v = 53 m/s

distance traveled by the truck, d = 350 m

The acceleration of the truck is calculated as;

v² = u² + 2ad

53² = 25² + (2 x 350)a

700a = 53² - 25²

700a = 2184

a = 2184 / 700

a = 3.12 m/s²

The average net force on the truck is calculated as;

F = ma

F = 1200 x 3.12

F = 3744 N

Therefore, the average net force on the truck is 3744 N.

An astronaut with a mass of 75 kg stands on Mars (gravity = 3.7 m/s2). How much does the astronaut weigh?

Answers

Answer:

277.5 N.

Explanation:

From the question given above, the following data were obtained:

Mass (m) of astronaut = 75 kg

Acceleration due to gravity on Mar (gₘ) = 3.7 m/s²

Weight of astronaut on Mar (Wₘ) =.?

Weight of an object is simply defined by the following equation:

Weight (W) = mass × acceleration due to gravity (g)

W = m × g

With the above formula, we can obtain the weight of the astronaut on Mar as follow:

Mass (m) of astronaut = 75 kg

Acceleration due to gravity on Mar (gₘ) = 3.7 m/s²

Weight of astronaut on Mar (Wₘ) =.?

Wₘ = m × gₘ

Wₘ = 75 × 3.7

Wₘ = 277.5 N

Thus, the weight of the astronaut on Mar is 277.5 N

A salmon jumps up a waterfall 2.4 m high. With what minimum speed did the salmon leave the water below to reach the top?

Answers

Answer:

6.86 m/s

Explanation:

The minimal velocity needed is when we have only vertical motion, then i will think in the problem only in one axis.

I suppose that the only force, in this case, is the gravitational force acting on the fish.

Then the gravitational equation of the fish will be:

a(t) = -9.8m/s^2

For the velocity equation we need to integrate over time to get:

v(t) = (-9.8m/s^2)*t + v0

Where v0 is the initial velocity of the fish and is what we want to find.

For the position equation we need to integrate over time again to get:

p(t) = (1/2)*(-9.8m/s^2)*t^2 + v0*t + p0

p0 is the initial position of the fish, and because he starts one the water, the initial position is p0 = 0 m

Then the equation is:

p(t) = (1/2)*(-9.8 m /s^2)*t^2 + v0*t

p(t) = (-4.9 m/s^2)*t^2 + v0*t

We know that the maximum height is 2.4m

The value of time at which the fish gets his maximum height is when the velocity of the fish is equal to zero, then we first need to solve:

v(t) = (-9.8m/s^2)*t + v0 = 0

      t = v0/9.8m/s^2

Now we replace this in the position equation to get the maxmimum height, which is equal to 2.4m

2.4m = p( v0/9.8m/s^2) =  (1/2)*(-9.8 m /s^2)*(v0/9.8m/s^2)^2 + v0*(v0/9.8m/s^2)

2.4m = (1/2)(-v0)^2(-9.8 m /s^2) + v0^2/(9.8m/s^2))

2.4m = (1 - 1/2)*v0^2/(9.8m/s^2)

2.4m = 0.5*v0^2/(9.8m/s^2)

2.4m/0.5 = v0^2/(9.8m/s^2)

4.8m*(9.8m/s^2) = v0^2

√(4.8m*(9.8m/s^2)) = v0 = 6.86 m/s

16+109=................

Answers

Answer:

=125 tysm for points

Explanation:

Answer: 125

Explanation: I good at addition

A tank, in the shape of a cube with each side measuring 2 meters, is half-full of water. Above the water is air that is pressurized to 5 kPa. Calculate the resultant force on one side of the tank due to the air and water (ignore atmospheric pressure) and determine the height of this force above the bottom of the tank.

Answers

Answer:

Explanation:

The tank is half full so height of water level is at 1 m . Centre of gravity of water will be at height of .5 m . Pressure will act at this point .

Pressure = h d g where h is height of centre of mass of water column , d is density of water and g is acceleration due to gravity .

Pressure of water column  = .5 x 10³ x 9.8 = 4.9 k Pa .

Air is pressurized to 5 kPa so

resultant pressure  on one side of the tank due to the air and water

= 4.9 + 5 kPa = 9.9 kPa .

Total force on one face = pressure x area of one face under water

= 9.9 x 10³ x .5 x 2²

= 19.8 kN .

what is the acceleration of an object that has a mass of 10kg and is pushed with a force of 50 N. just answer this question with the number no unit​

Answers

Answer:

a = 5 [m/s²]

Explanation:

We know from Newton's second law that the sum of forces on a body is equal to the product of mass by acceleration.

∑F = m*a

where:

F = total force = 50 [N]

m = mass = 10 [kg]

a = acceleration [m/s²]

Now replacing:

[tex]a = \frac{F}{m} \\a=50/10\\a = 5 [m/s^{2} ][/tex]

Which of the following is a concern about the use of wind energy?
A. Wind farms produce a large amount of air and water pollution.
B. Wind farms may pose a threat to birds and bats.
O
C. Wind farms produce radioactive waste.
D. Wind farms often change the local weather patterns.
SUBMIT

Answers

Use of wind energy may pose a threat to birds and bats.

What is wind energy?

The power of wind is harnessed to generate renewable energy through the use of wind turbines. These turbines are designed to capture the kinetic energy of the wind and convert it into electricity by rotating their blades. This process involves the movement of turbines, which in turn drives a generator that produces electricity. Wind energy is an eco-friendly and sustainable form of energy that does not emit any harmful gases or pollutants into the atmosphere. As countries worldwide seek to reduce their dependence on fossil fuels and transition towards a low-carbon economy, wind energy is gaining popularity as a clean source of electricity.

Which is a concern about the use of wind energy?

The implementation of wind energy has raised concerns about its impact on wildlife, specifically birds and bats. The use of wind turbines can lead to collisions and habitat disruptions for these animals. Despite this, studies have shown that wind turbines cause fewer fatalities for birds and bats in comparison to other human-related sources such as buildings, power lines, and vehicles. To mitigate the impact on wildlife, measures like radar technology to detect animal movement and shutting down turbines during migration periods are being employed..

To know more about wind energy, click here

https://brainly.com/question/29293441

#SPJ1

The impulse given to a body of mass 1.5 kg, is 6.0 kg
• m•s-?
If the body was initially at rest, what
will its resulting kinetic energy be? Give your answer in J without units.

Show work

Answers

Answer:

12J

Explanation:

Given parameters:

Mass  = 1.5kg

Impulse  = 6kgm/s

 let us start first by find the velocity with which this body moves;

       Impulse  = mass x velocity

         Velocity  = Impulse /  mass  = 6/ 1.5  = 4m/s

Initial velocity  = 0m/s

Unknown:

Resulting kinetic energy  = ?

Solution:

To solve this problem use the formula below:

      K.E  = [tex]\frac{1}{2}[/tex]  m (v  - u)²  

m is the mass

v is the final velocity

u is the initial velocity

  So;

        K.E  =  [tex]\frac{1}{2}[/tex]  x 1.5 x (4 - 0)²  

  K.E  = 1.5 x 8  = 12J

One disadvantage to experimental research is that experimental conditions do not always reflect reality.


Please select the best answer from the choices provided

T
F

Answers

Answer:

It's true I took the test on Edge.

Explanation:

Answer:

True

Explanation:

Got it right on edg

Which of these represent approaches to psychological science? (Choose every correct answer.)
Behavioral
Chemical
Investigative
Metaphysical
Sociocultural
Cognitive
Humanistic

Answers

Answer:

cognitive, humanistic, behavioral, sociocultural

Explanation:

Behavioral, sociocultural, cognitive, and humanistic are approaches to psychological science.

Psychology is a term to refer to the discipline that focuses on the study of various topics related to human thought such as:

The conductMental processes of individuals and human groups in different situations,Human experience

Due to the above, several subdisciplines have emerged that focus on the study of each of the topics. For example:

Behavioral psychology: focused on the study of human behavior.

Sociocultural psychology: focused on the study of human behavior and thought in different social situations.

Cognitive psychology: focused on mental processes related to learning.

Humanistic psychology: focused on the study of human thought from a comprehensive approach.

According to the above, options A, E, F, and G are correct because they mention different sub-disciplines of psychology while the other options mention terms that are not related to sub-disciplines or psychological sciences.

Learn more in: https://brainly.com/question/9807106

A cars mass is 950kg and it travels at a speed of 35 m/s when it rounds a flat curve of radius 215 m.
a. Determine the value of the frictional force exerted on the car.

b. Determine the value of the coefficient of friction between the tires and the road.

Answers

(a) It's the force of (static) friction that keeps the car on the road and prevents it from skidding, and this friction is directed toward the center of the curve.

Recall that centripetal acceleration has a magnitude a of

a = v ² / R

where

v = tangential speed

R = radius of the curve

so that

a = (35 m/s)² / (215 m) ≈ 5.69767 m/s² ≈ 5.7 m/s²

Parallel to the road, the only force acting on the car is friction. So by Newton's second law, we have

F = Fs = m a

where

Fs = magnitude of static friction

m = mass of the car

Then

Fs = (950 kg) (5.7 m/s²) ≈ 5412.79 N ≈ 5400 N

(b) Perpendicular to the road, the car is in equilbrium, so its weight and the normal force of the road on the car are equal in magnitude. By Newton's second law,

N - W = 0

where

N = magnitude of normal force

W = weight

so that

N = W = m g = (950 kg) (9.8 m/s²) = 9310 N

Friction is proportional to the normal force by a factor of µ, the coefficient of static friction:

Fs = µ N

Assuming 35 m/s is the maximum speed the car can travel without skidding, we find

µ = Fs / N = (5400 N) / (9310 N) ≈ 0.581395 ≈ 0.58

How can force-time and force-displacement graphs be used to find the impulse or work done?


A. Area under force-time graph & Area under force-displacement graph

B. Area under force-displacement graph & Area under force-time graph

C. Gradient of force-time graph & Gradient of force-displacement graph

D. Gradient of force-displacement graph & Gradient of force-time graph

Answers

Answer:

A. Area under force-time graph & Area under force-displacement graph

Explanation:

To find the impulse or work done the area under force-time graph and area under force-displacement graph will give us these respective values.

 Impulse  = Force x time

 Work done  = Force x displacement

When we plot a graph of force and time, the area under it is the impulse.

When a graph of force and displacement is plotted, the area under is the work done.

How does the force of friction for a sliding object vary with the area of contact?

Answers

Answer:

The force and texture of an object matter a lot.

Explanation:

If you were to try and run up a glass hill, could you? You maybe could, but it would be harder to than up carpet.

An airplane is heading due south at a speed of 560 km/h . If a wind begins blowing from the southwest at a speed of 80.0 km/h (average). Calculate magnitude of the plane's velocity, relative to the ground.

Answers

Answer:

the magnitude of Vpg = 493.711 km/h

Explanation:

given data

speed Vpg = 560 km/h

speed Vwg = 80 km/h

solution

we get here magnitude of the plane velocity w.r.t. ground is

we know that the Vpg = Vpw + Vwg       .....................1

writing the component of the velocity that is

Vpw = (0 km/h î - 560 km/h j )

Vwg = (80 cos 45 km/h î + 80 sin 45 km/h j)

adding these

Vpg = (0+80 cos 45 km/h ) î  + ( -560 + 80 sin 45 km/h j)i

Vpg = (42.025 )  î  (-491.92 km/h)j

now we take magnitude

the magnitude of Vpg = [tex]\sqrt{(42.025^2+(-491.92)^2)} km/h[/tex]

the magnitude of Vpg = 493.711 km/h

Other Questions
A 35 kg box initially sliding at 10 m/s on a rough surface is brought to rest by 25 Nof friction. What distance does the box slide? 17. GradPointGuided PracticeAnn receives a 4% commission on her sales. Her last paycheck included $196 in commissions. Solve the formula C = 0.04s for s, where C is the amount of commission and s is the amount of sales. Then substitute to find her sales.A.$4,900B.$7.84C.$196.04D.$195.96 please answer and fast i am in a test A recipe for crumb cake says to mix 38 cup of brown sugar and 13 cup of white sugar.From this sugar mixture, set aside 14 cup for the crumb topping.The remaining sugar mixture is used to make the cake.What amount of the sugar mixture is used to make the cake? A. 17/24 cup B. 1/2 cup C. 11/24 cup D. 7/12 cup QUCIK!!!! Find the equation of the line with Slope = 5 and passing through (7,43). Write your equation in slopeintercept form Christina needed 8 pounds of flour to make cookies that willserve 44 people. How many pounds of flour will Christinaneed to feed 66 people? 75=n+12 what is the full problem and check your answers with simplifacation which do you feel worse worse Babonica pledge or Spanish flu? why? Help me on both of those questions please A hockey puck slides to a stop on ice. The coefficient of friction between the puck andthe ice is 0.026. What is the pucks acceleration? Below is data for 250 offspring mice, as produced in a laboratory.A 5-column table has 4 rows. The first column has entries Predicted fraction, predicted percentage, simulated fraction, simulated percentage. The second column is labeled Black fur and black eyes with entries 9/16, 56.25 percent, 155/250, 62 percent. The third column is labeled Black Fur and Red Eyes with entries 3/16, 18.75 percent, 51/250, 20.4 percent. The fourth column is labeled White Fur and Black eyes with entries 3/16, 18.75 percent, 44/250, 17.6 percent. The fifth column is labeled White fur and red eyes with entries 1/16, 6.25 percent, 20/250, 8 percent.Notice that the predicted percentages and laboratory percentages are not the same. These differences most likely result from Five italian chefs came together to bake the worlds largest pizza. Its diameter is 60 feet long. Which of these is the closest to the area of the pizza.A: 188.4 square feetB: 11,304 square feetC: 2,826 square feetD: 376.8 square feet If a man is driving at a rate of 80 km per hour, how many kilometers will he travel in 30 minutes? A. 30 km B. 40 km C. 60 km D. 240 km Select the correct answer.Which of these situations is an example of external conflict?A. choosing whether to help a strangerB. deciding whether to go to a party or study for an examC. looking for shelter during a thunderstormD. feeling anxious about giving a speechReset Next What would you look for under a microscope on a slide with meiotic cells if you wanted to identify metaphase I Which MOLECULES are DIRECTLY involved in protein synthesis-translation? (choose 3) 1. mRNA2. rRNA3. tRNA4. cytoplasm5. sugar6. DNA7. Golgi Apparatus8. amino acid Qu recursos utilizaras para despertar el inters por el estudio de la geografa? The next three questions use the below information. Company A started business on January 1, 20X1, and bought the following piece of equipment. Cost of asset $150,000 Useful life 3 Tax rate 21% 20X1 estimated tax payment 1,800 Depreciation for book and tax purposes is as follows: Book Tax 20X1 40,000 100,000 20X2 40,000 20,000 20X3 40,000 0 20X1 income statement information: Sales 638,000 Expenses (does not include depreciation expense and tax expense) 510,000 What is net income for 20X1? A rocket blasts off and moves straight upward from the launch pad with constant acceleration. After 2.7 s the rocket is at a height of 93 m.What are the magnitude and direction of the rocket's acceleration? What is its speed at this elevation? GIVING BRAINLIEST! AND 20 POINTS!The two triangles below are similar. To the nearest tenth, what is the measurement of the missing side?