Answer:
11267.61 Kg/m³.
Explanation:
From the question given above, the following data were obtained:
Mass of lead = 32 g
Volume of lead = 2.84 cm³
Density of lead =.?
Next, we shall convert 32 g to Kg. This can be obtained as follow:
1000 g = 1 Kg
Therefore,
32 g = 32 g × 1 Kg / 1000 g
32 g = 0.032 Kg
Next, we shall convert 2.84 cm³ to m³. This can be obtained as follow:
1 cm³ = 10¯⁶ m³
Therefore,
2.84 cm³ = 2.84 cm³ × 10¯⁶ m³ / 1 cm³
2.84 cm³ = 2.84×10¯⁶ m³
Finally, we shall determine the density of the piece of lead. This can be obtained as follow:
Mass of lead = 0.032 Kg
Volume of lead = 2.84×10¯⁶ m³
Density of lead =.?
Density = mass / volume
Density of lead = 0.032 / 2.84×10¯⁶
Density of lead = 11267.61 Kg/m³
What does not affect the strength of an electromagnet?
Answer:
Unlike a permanent magnet, an electromagnet can be turned on and off using electrical current. Many variables affect the strength of this electromagnet, and there are some variables that do not affect the strength. ... Making the nail longer will not make the magnet stronger, unless you also add more turns to the coil.
electromagnet can be turned on and off using electrical current. Many variables affect the strength of this electromagnet, and there are some variables that do not affect the strength
At 25.0°C the Henry's Law constant for dinitrogen monoxide (N2O) gas in water is 0.025 M/atm.
Calculate the mass in grams of N2O gas that can be dissolved in 325. mL of water at 25.0°C and a N2O partial pressure of 0.69 atm.
Be sure your answer has the correct number of significant digits.
Answer:
The mass in grams of N₂O gas that can be dissolved is 0.18 g
Explanation:
The solubility of a gas is proportional to the partial pressure of that gas, over a determined solvent. That's what Henry's law states. We see the formula:
S = K . Pp
Where S is solubility and K is Henry's constant. This specific for each gas and each temperature, while Pp means partial pressure.
We replace data:
S = 0.025 M/atm . 0.69atm
S = 0.01725 M
This is the solubility of the gas, so now, we need to know what mass of gas is solubilized. We convert the moles, with the volume of water.
0.01725 mol/L . 0.235 L = 4.05×10⁻³ moles
Now, we determine the mass in grams: 4.05×10⁻³ mol . 28 g / 1mol =
0.1782 g
How many grams of Mo2(S04)3 are in 5.35X10 22 molecules of Mo2 (SO4)3?
Answer:
42.658
Explanation:
1) Avogadro's number is: N(A)=6.02*10²³
2) M of (Mo₂(SO₄)₃)=96*2+96*3=480 (gr/mol);
3) if N(A) ~ 1 mol of (Mo₂(SO₄)₃), tnen 5.35*10²² ~
(5.35*10²²)/(6.02*10²³)≈0.0888 mol of (Mo₂(SO₄)₃);
4) m(Mo₂(SO₄)₃)=M(Mo₂(SO₄)₃)*0.0888;
m((Mo₂(SO₄)₃)=480*0.0888=42.658 (gr)
A particle that travels around the nucleus of an atom in orbitals is called a(n)
Answer: electrons
Explanation:
Answer: It is called an electron because it is attracted to the positively charged particales called protons in the center of the atom.
Explanation:
Will liquid with higher density be more or less buoyant?
Answer:
Explanation:
if it has a lower density than the liquid it's in will float
This diagram is attempting to compare the sizes of the four inner planets. What is wrong with this diagram?
Answer:
points
Explanation:
Answer:
Where is the diagram?
Explanation:
..........................
how far does light travel in 3.0 days
Answer:
[tex]d=7.77\times 10^{13}\ m[/tex]
Explanation:
We know that the speed of light is equal to [tex]3\times 10^8\ m/s[/tex]
We need to find how far the light travel in 3 days.
Speed of an object is equal to distance covered divided by time taken.
Also, 1 day = 86400 s
3 days = 259200 s
So,
[tex]d=vt[/tex]
[tex]d=3\times 10^8\times 259200\\\\d=7.77\times 10^{13}\ m[/tex]
So, the light will travel [tex]7.77\times 10^{13}\ m[/tex] in 3 days.
The balanced equation for the production of sugars by photosynthesis is shown below.
This equation demonstrates the law of conservation of mass because
A.
there are more oxygen atoms on the right side of the equation than on the left.
B.
there is the same number of compounds on the right side of the equation as the left.
C.
there is the same number of each type of atom on the right side of the equation as the left.
D.
the sugar molecule on the right has the same mass as the carbon dioxide molecules on the left.
Answer:
Black
Explanation:
Answer:
the answer is
-there is the same number of each type of atom on the right side of the equation as the left.
Explanation:
i have study island too :')
Re-order each list in the table below, if necessary, so that the atoms or ions in it are listed in order of decreasing size.
atoms or lons:
•Be, Be^+, Li
•Br, I, Cl
•Cl, Na, S
atoms or lons in order
of decreasing size
Answer: Na, S, Cl
Explanation:
Atomic size decreases as one moves from left to right on the periodic table with elements in the same period. This is as a result of the electrons increasing in the outer circle and thus being drawn to the protons in the nucleus which will lead to the outer shell area decreasing.
Sodium (Na) comes before Sulfur (S) which comes before Chlorine (S) so this is the decreasing order as they are all in the same period.
100 POINTS FOR BEST ANSWER! What is the difference between LDOF and SDOF
An SDOF system is one whose motion is governed by a single, second-order differential equation. Only two variables, position and velocity are needed to describe the trajectory of the system. Many structures can be idealized as single degree-of-freedom systems.
The LDAP Data Interchange Format is a standard plain text data interchange format for representing LDAP directory content and update requests. LDIF conveys directory content as a set of records, one record for each object.
An unknown object has a mass of 150 grams and a volume of 5 cm3. What is the density of this
object?
Answer:
1.2 cm
Explanation:
The reason how I got my answer is by dividing 150 by 125 and that gave me 1.2 cm.
Based on the following chemical equation how many molecules of Hydrogen (H) are present in the reactants side?
2H2 + O2 ----> 2H2O
Question 1 options:
1
2
3
4
Answer:
2
Explanation:
Based on the chemical equation, the number of molecules of hydrogen gas in the reactant side is 2.
This is indicated by the coefficient before reactant.
A molecule is a covalent compound that has discrete or separate units.
So H₂ is made up of two atoms of hydrogen that has been covalently bonded together by sharing their valence electrons.
From the reaction expression:
2 molecules of hydrogen gas combines with 1 molecule of oxygen gas to produce 2 molecules of water.
Plz help guys help me
Answer:
Six Steps to Control Workplace Hazards
Step 1: Design or re-organise to eliminate hazards. ...
Step 2: Substitute the hazard with something safer. ...
Step 3: Isolate the hazard from people. ...
Step 4: Use engineering controls. ...
Step 5: Use administrative controls. ...
Step 6: Use Personal Protective Equipment (PPE)
Explanation:
i it true?
Draw the structure(s) of the major organic product(s) of the following reaction. 1. lithium diisopropylamide / hexane 2. 1 eq. CH3I You do not have to consider stereochemistry. Omit products derived from the acidic or basic reagent itself, e.g. HN(i-Pr)2 derived from N(i-Pr)2-. If no reaction occurs, draw the organic starting material. If substantial starting material is present at the end of the reaction, include it in the products. Draw one structure per sketcher. Add additional sketchers using the drop-down menu in the bottom right corner. Separate structures with signs from the drop-down menu.
Answer:
See explanation below
Explanation:
You are not providing the starting material, however, I manage to find a similar question to this, so I'm gonna use it as a basis to help you answer yours.
Now let's analyze what is happening in the reaction so we can predict the final product.
We have a ketone here, reacting at first with LDA. This is a very strong base that is commonly used in reactions with ketones and aldehydes to promove a condensation. To do this, as LDA is a strong base it will occur firts an acid base reaction, substracting the most acidic hydrogen in the molecule (Which in this case, is the Beta hydrogen of the carbonile). This will cause an enolate formation.
Then, this enolate will react with the CH3I and form a new product. The final result would be a ketone with a methyl group now attached. In the picture 2, you have the mechanism and final product.
Hope this helps
Write a mechanism for the esterification of propanoic acid with 18O-labeled ethanol. Show clearly the fate of the 18O label. (b) Acid-catalyzed hydrolysis of an unlabeled ester with 18O-labeled water (H218O) leads to incorporation of some 18O into both oxygens of the carboxylic acid product. Explain by a mechanism. (Hint: You must use the fact that all steps in the mechanism are reversible.)
Answer:
See explanation and images attached
Explanation:
a) In the mechanism for the acid catalysed esterification of propanoic acid using ethanol, we can see that the first step is the protonation of the acid followed by nucleophillic attack of the alcohol. Loss of water and consequent deprotonation regenerates the acid catalyst. We can see the fate of the 18O labelled ethanol in the mechanism shown.
b) In the second mechanism, an unnamed ester is hydrolysed using an acid catalyst. The attack of the acid and subsequent nucleophillic attack of water labelled with 18O leads to the incorporation of this 18O into the product acid as shown in the mechanism attached to this answer.
Rank the following elements by electron affinity, from most positive to most negative EA value.
Rank from most positive to most negative. To rank items as equivalent, overlap them.
bromine
sodium
tellurium
helium
phosphorus
Answer:
Explanation:
Bromine >Tellurium > Phosphorus > Helium > Sodium
Electron affinity of Bromine , Tellurium , Phosphorus are positive , of helium is zero and of sodium is negative .
After a big game, you put your water bottle inside the refrigerator. The next
day you see that your water bottle has become dented. Which statement
best describes what happened?
A.
Heat molecules left the water bottle.
B.
Some air molecules were broken down.
C.
The air particles slowed down and got closer together.
D.
Some of the air molecules escaped the water bottle.
Mostly and for what I would say is A
The gases can undergo compression when subjected to lower temperatures and pressure. The water bottle becomes dented as the collision slowed down and got closer to each other. Thus, option C is correct.
What is freezing?Freezing has been the physical process that is involved in changing the states of matter from liquid to solids. This results in a decrease in the entropy of the water which decreases the heat and randomness of the particles.
As the temperature decreases the collision and the kinetic energy of the particles decreases. This results in the loss of entropy and makes the molecules or the particles show a higher force of attraction leading to close packing. The space becomes dense and tightly packed.
As the particle becomes closely packed it dents the water bottle at low temperature as now it has its own shape (solids) unlike the liquids. The lower temperature converts the liquids into solids.
Therefore, as the water freezes the bottle experiences a dent as ice is formed from liquids by freezing.
Learn more about freezing, here:
https://brainly.com/question/14131507
#SPJ2
3.4 x 10-25 kg = ? microounces
Answer: 1.2 x 10^-17 microounces
Explanation:
Ounce = 28.5G microounce = 28.5*10^-6g
3.4*10^-25 kg = 3.4*10^-22 g = (3.4/2.85)*10^(-22+5) = 1.2*10-17
Joseph Priestly is frequently credited with the discovery of oxygen, and was reported to have produced molecular oxygen from the decomposition reaction of mercury(II) oxide, which is the reverse of the synthesis of HgO depicted in the following equation. 4 Hg(l) + 2 O2(g) LaTeX: \rightarrow → 4 HgO(s) Determine the value of LaTeX: \Delta ΔH°rxn for the synthesis, given that
Joseph Priestly is frequently credited with the discovery of oxygen, and was reported to have produced molecular oxygen from the decomposition reaction of mercury(II) oxide, which is the reverse of the synthesis of HgO depicted in the following equation. [tex]4Hg(l)+2O_2(g)\rightarrow 4 HgO(s) [/tex]Determine the value of [tex]\Delta ΔH°rxn[/tex] for the synthesis, given that [tex]\Delta H_f^0[/tex] for HgO is -90.7 kJ/mol.
Answer: The enthalpy change for this reaction is, -362.8 kJ
Explanation:
The balanced chemical reaction is,
[tex]4Hg(l)+2O_2(g)\rightarrow 4HgO(s)[/tex]
The expression for enthalpy change is,
[tex]\Delta H=\sum [n\times \Delta H_f(product)]-\sum [n\times \Delta H_f(reactant)][/tex]
[tex]\Delta H=[(n_{HgO}\times \Delta H_{HgO})]-[(n_{O_2}\times \Delta H_{O_2})+(n_{Hg}\times \Delta H_{Hg})][/tex]
where,
n = number of moles
[tex]\Delta H_{O_2}=0[/tex] (as heat of formation of substances in their standard state is zero
[tex]\Delta H_{Hg}=0[/tex] (as heat of formation of substances in their standard state is zero
Now put all the given values in this expression, we get
[tex]\Delta H=[(4\times -90.7)]-[(2\times 0)+(4\times 0)][/tex]
[tex]\Delta H=-362.8kJ[/tex]
Therefore, the enthalpy change for this reaction is, -362.8 kJ
Question 4 of 10
What form of the ideal gas law would you use to calculate the temperature of
a gas?
O A. Ta
B. Y =
C. P = nRT
D. n =
RT
Answer:
C. P = nRT
Explanation:
PV = nRT, where n is a number of moles and R is the universal gas constant, R = 8.31 J/mol ⋅ K.
Hope this helps :)
Answer:T =PV/nR
Explanation:
A rock's mass is a:
A. all of the above
B. chemical property
C. physical property
D. constant property
Answer:
all of the above
Explanation:
now I will bless you with this-
How can the IR spectrum be used to show that there is not starting material left and the products are alcohols
Answer:
hello your question is incomplete attached below is the complete question
answer :
Absence of c = c = C-H of the peak and the presence of -O-H and C-O peak shows that there is presence of Alcohols as products and it also shows that there is no starting material left
Explanation:
To provide that there is no starting material left and products are alcohols using the IR spectrum we will apply hydroboration oxidation
Absence of c = c = C-H of the peak and the presence of -O-H and C-O peak shows that there is presence of Alcohols as products and it also shows that there is no starting material left
attached below is the detailed solution
A catalyst decreases the activation energy of a particular exothermic reaction by 56 kJ/mol, to 35 kJ/mol. Assuming that the mechanism has only one step, and that the products are 78 kJ lower in energy than the reactants, sketch approximate energy-level diagrams for the catalyzed and uncatalyzed reactions. What is the activation energy for the uncatalyzed reverse reaction
Answer:
Activation energy for the uncatalyzed reverse reaction = 103 kJ/mol
Explanation:
Activation energy decreases from = 56 kj/mol to 35 kj/mol
products = 78 KJ lower in energy than reactants
Activation energy for the uncatalyzed reverse reaction = 103 kJ/mol
attached below are the sketches of approximate energy-level for both catalyzed and uncatalyzed reactions
which statements best describe measuring with a graduated cylinder?
To solve the ultraviolet catastrophe, Planck applied quantization to: Select the correct answer below:
A. vibrational energies of atoms
B. orbital energies of electrons
C. kinetic energies of photons
D. temperature of the system
Answer:
Vibrational energies of atoms
Explanation:
Planck applied quantization to Vibrational energies of atoms because in Black body spectrum prediction a blackbody at equilibrium is expected to radiate energies at various Frequencies ( i.e. increase in radiated energy ∝ increase in frequency ) but towards the ultraviolet region of the spectrum the energy radiated begins to drop as frequency increases. The phenomenon of drop in energy with increase in frequency is termed Ultraviolet catastrophe. hence to solve this phenomenon Planck applied quantization to Vibrational energies of atoms
Temperature can weather rocks because A heat can cause minerals to oxidize B. most rocks do not absorb heat evenly C. water contracts when it freezes D. rocks usually melt in the hot sun
Answer:
b
Explanation:
it is not c because water expands when it freezes.
Give the structure that corresponds to the following molecular formula and H1 NMR spectrum: The proton N M R shows a triplet at 0.9 p p m integrating to 11238 and a quartet at 1.4 integrating to 7473. THere is a singlet at 1.35 p p m integrating to 1275 that disappears after a D 2 O shake. The unknown compound has a molecular formula of C 7 H 16 O. The magenta numbers in the spectrum are the relative integrals in arbitrary units. Draw the structure.
Answer:
Kindly check the attached picture for the diagram of the chemical compound.
Explanation:
So, the following parameters were given from the question above;
=> A triplet at 0.9 ppm and a quartet at 1.4 ppm, a singlet at 1.35 ppm. Now, the unknown compound has a molecular formula of C7H16O.
For a triplet at 0.9ppm, there are nine (9) atoms of hydrogen, for the quartet at 1.4ppm there are six(6) atoms of hydrogen and for the singlet at 1.35 ppm, the number of hydrogen atoms is one(1). Hence, the total number of hydrogen atoms = 16.
Therefore, number of bondings = [(2 × number of carbon atoms) + 2 - number of hydrogen atoms present on the compound)/2 .
Thus number of bonds =[( 2× 7) + 2 - 16] ÷ 2 = 0.
Hence, there is no double bond or ring in the compound.
How many moles of sodium are present in 17 g of Na?
What is the number of moles in 60g of Na2SO4?
How many moles are there in 93.5g of CO2?
How many moles are there in 25.6g of Sodium Nitrate?
Determine the number of particles in .75 mol of calcium hydroxide
Answer:
1. 0.74mol
2. 0.42mol
3. 2.125mol
4. 0.301mol
5. 4.52 × 10^23 particles
Explanation:
Number of moles (n) in a substance can be found using the formula:
mole (n) = mass/molar mass
Using this formula, the following moles are calculated:
1. Molar of Na = 23g/mol
mole = 17/23
mole = 0.74mol
2. Molar mass of Na2SO4 = 23(2) + 32 + 16(4)
= 46 + 32 + 64
= 142g/mol
Mole = 60/142
mole = 0.42mol
3. Molar mass of CO2 = 12 + 16(2)
= 12 + 32
= 44g/mol
mole = 93.5/44
mole = 2.125mol
4. Molar mass of sodium nitrate (NaNO3) = 23 + 14 + 16(3)
= 23 + 14 + 48
= 85g/mol
mole = 25.6/85
mole = 0.301mol
5. Number of particles in one mole of a substance is 6.022 × 10^23 particles. Hence, in 0.75mol of calcium hydroxide (Ca(OH)2, there will be;
0.75mol × 6.02 × 10^23
= 4.515 × 10^23
= 4.52 × 10^23 particles
3.
What do we call materials
that let heat pass through
them easily?
Thermal conductors
Thermal insulators
Transparent
4.
Which of these is a good
thermal conductor?
Plastic
Wood
Steel
5.
Which of these is a good
thermal insulator?
Steel
Iron
Polystyrene
6.
To save on heating bills, do
you think the roof of a
building should be lined with...
a thermal conductor
a thermal insulator
nothing
7.
How does heat travel?
From cold things to hotter things
From hot things to colder things
Between things of the same temperature
Answer:
thermal conductors
steel
polystyrene
thermal insulator
between things of the same temp?
sorry to ask but if its ok with you, may i get brainly, i need to rank up all i need is two more, if not its fine. thank you and yours truly golden
Methyl salicylate is a common active ingredient in liniments such as ben-gay. It is also known as oil of wintergreen. It is made up of carbon, hydrogen, and oxygen atoms. When a sample of methyl salicylate weighing 5.287 g is burned in excess oxygen, 12.24 g of carbon dioxide and 2.505 g of water are formed. What is the simplist formula for oil of wintergreen
Answer: The empirical formula is [tex]C_3H_3O[/tex].
Explanation:
The chemical equation for the combustion of hydrocarbon having carbon, hydrogen and oxygen follows:
[tex]C_xH_yO_z+O_2\rightarrow CO_2+H_2O[/tex]
where, 'x', 'y' and 'z' are the subscripts of Carbon, hydrogen and oxygen respectively.
We are given:
Mass of [tex]CO_2[/tex] = 12.24 g
Mass of [tex]H_2O[/tex] = 2.505 g
Molar mass of carbon dioxide = 44 g/mol
Molar mass of water = 18 g/mol
For calculating the mass of carbon:
In 44g of carbon dioxide, 12 g of carbon is contained.
So, in 12.24 g of carbon dioxide, =[tex]\frac{12}{44}\times 12.24=3.338g[/tex] of carbon will be contained.
For calculating the mass of hydrogen:
In 18g of water, 2 g of hydrogen is contained.
So, in 2.505 g of water, =[tex]\frac{2}{18}\times 2.505=0.278g[/tex] of hydrogen will be contained.
Mass of oxygen in the compound = (5.287) - (3.338+0.278) = 1.671 g
Step 1 : convert given masses into moles.
Moles of C =[tex] \frac{\text{ given mass of C}}{\text{ molar mass of C}}= \frac{3.338g}{12g/mole}=0.278moles[/tex]
Moles of H=[tex]\frac{\text{ given mass of H}}{\text{ molar mass of H}}= \frac{0.278g}{1g/mole}=0.278moles[/tex]
Moles of O=[tex]\frac{\text{ given mass of O}}{\text{ molar mass of O}}= \frac{1.671g}{16g/mole}=0.104moles[/tex]
Step 2 : For the mole ratio, divide each value of moles by the smallest number of moles calculated.
For C =[tex]\frac{0.278}{0.104}=3[/tex]
For H =[tex]\frac{0.278}{0.104}=3[/tex]
For O =[tex]\frac{0.104}{0.104}=1[/tex]
The ratio of C : H : O = 3: 3: 1
Hence the empirical formula is [tex]C_3H_3O[/tex].