A simple ideal Rankine cycle with water as the working fluid operates between the pressure limits of 4 MPa in the boiler and 5 kPa in the condenser and a turbine inlet temperature of 700°C. The boiler is sized to provide a steam flow of 50 kg/s. Determine the power produced by the turbine and consumed by the pump. Use steam tables.
Answers
The pump work = v3.dP = 57.18 x 0.001 x ( 4000 - 20) =227.57 KW
How to solvehere At T1 = 700 C and P1 = 4 Mpa, from steam tabel : h1 =3906.41 KJ/Kg and s1 = 7.62 KJ/Kg.K
now s1 = s2 = 7.62 KJ/Kg.K as 1-2 is isentropic
so at P2 = 20 Kpa and s2 = 7.62 KJ/Kg.K , fom steam table : h2 = 2513.33 KJ/Kg
a) power produced by turbine = m.( h1 - h2) = 57.18 x ( 3906.41 - 2513.33) = 79656.15 KW
b) at P3 = 20 Kpa, 3 = vf = 0.001 m^3/kg
so pump work = v3.dP = 57.18 x 0.001 x ( 4000 - 20) =227.57 KW
Read more about power here:
https://brainly.com/question/20137708
#SPJ1
Related Questions
A technician is configuring a router to allow for all forms of management access. As part of each different type of access, the technician is trying to type the command login. Which configuration mode should be entered to do this task?
Answers
The configuration mode that the technician should enter to type the command "login" for all forms of management access on a router is the "line configuration mode".
The configuration mode that the technician should enter to type the command "login" for all forms of management access on a router is the "line configuration mode". This mode allows for the configuration of different types of lines, such as console, auxiliary, and virtual terminal lines, which are used for different types of management access. By entering this mode, the technician can specify the login requirements for each line, including the use of a password or other authentication mechanism.
Learn more about configuration mode here
https://brainly.com/question/13197356 #SPJ11
During normal operation, from which location do most Cisco routers run the IOS?
Answers
During normal operation, most Cisco routers run the IOS (Internetwork Operating System) from the Flash memory location. This is where the IOS image is stored and loaded during the router's boot-up process.
An exclusive operating system known as Cisco IOS (Internetwork Operating System) is used by Cisco Systems' routers and switches. The primary function of Cisco IOS is to facilitate data communication between network nodes. An operating system is a piece of system software that manages the hardware, software, and resources of a computer. Operating systems are used by computers, smartphones, video games, and other devices.
Hardware identification, multiprocessing, protocol, and processor support are all examples of basic operating system support. sharing of software and a printer. sharing a same database and file system. features for access control and user authentication in networks.
A "Network Operating System" is an operating system that includes associated protocols and applications to enable quick and inexpensive communication.
Learn more about internetwork operating system here
https://brainly.com/question/28991932
#SPJ11
A. In the post-World War II era, perceptive corporate leaders understood the need to develop corporate ____________________ _______________ as part of their expansion into multinationals and to help shape their companies' reputations for quality and reliability.
Answers
In the post-World War II era, perceptive corporate leaders understood the need to develop corporate social responsibility as part of their expansion into multinationals and to help shape their companies' reputations for quality and reliability. Corporate social responsibility refers to the responsibility of corporations to contribute positively to society through ethical behavior and sustainable practices.
For such more question on stewardship
https://brainly.com/question/6684483
#SPJ11
Secure rooms and vaults must be constructed to meet GSA approved standards:
Answers
When it comes to constructing secure rooms and vaults, it is important to ensure that they meet GSA approved standards.
GSA, or the General Services Administration, sets the standards for secure facilities in order to ensure the protection of sensitive information and assets. These standards cover a wide range of requirements, such as the materials used in construction, the layout of the space, and the types of locks and other security measures that must be in place. By meeting these standards, organizations can be confident that their secure rooms and vaults are providing the level of protection needed to safeguard their assets and information.
To learn more about secure click the link below:
brainly.com/question/28926575
#SPJ11
he process of annealing can be used to achieve all of the following actions except a) stress relief b) recrystallization c) grain growth d) toughness
Answers
The statement is incorrect. Annealing can be used to achieve all of the following actions listed: stress relief, recrystallization, grain growth, and toughness.
Annealing is a heat treatment process in which a material, usually a metal or alloy, is heated to a specific temperature and then cooled slowly. This process can modify the microstructure of the material, improving its properties. The specific results achieved through annealing depend on the material being treated, the temperature used, and the cooling rate.
Stress relief annealing reduces residual stresses within a material, making it less likely to deform or crack during subsequent processing. Recrystallization annealing can be used to remove strain hardening in a material and restore its ductility. Grain growth annealing can be used to modify the size and distribution of grains in a material, which can affect its strength and other properties. Toughness can be improved through annealing by modifying the microstructure of the material to make it more resistant to fracture or other forms of failure.
To know more about Annealing,
https://brainly.com/question/31089250
#SPJ11
How is the period of a sine wave measured?
The period is measured from one zero crossing to the next corresponding zero crossing, or from one peak to the next corresponding peak.
Answers
The period of a sine wave is measured by identifying the points where the wave crosses the horizontal axis, known as the zero crossings. The period is then measured from one zero crossing to the next corresponding zero crossing, or from one peak to the next corresponding peak.
This measurement gives the duration of one complete cycle of the sine wave.
The two main stages a marketing manager must take before designing an advertising programme are identifying target markets and determining buyers' motivations:
These two will provide them identifying the ability to make the crucial choices involved in creating an efficient advertising programme.
The four key choices needed to create an efficient advertising campaign include
1. Choosing marketing goals
2. Budgeting for advertising
3. Creating an advertising plan
4. Analysing marketing initiatives.
Learn more about identifying here
https://brainly.com/question/15285166
#SPJ11
Which publicly available resources describe protocols, processes, and technologies for the Internet but do not give implementation details?
Answers
These resources provide valuable information about protocols, processes, and technologies for the Internet but are not intended to provide implementation details.
Implementation details are typically provided in technical manuals, programming guides, and other resources specific to a particular implementation.There are several publicly available resources that describe protocols, processes, and technologies for the Internet but do not give implementation details. Some of these resources include:
1. Internet Engineering Task Force (IETF) Request for Comments (RFCs): These documents define the standards and protocols for the Internet. While they provide a detailed description of the protocol or technology, they do not provide implementation details.
2. Internet Society (ISOC) publications: ISOC publishes papers, reports, and articles on various topics related to the Internet, including protocols, processes, and technologies. These resources provide an overview of the topic but do not provide implementation details.
3. National Institute of Standards and Technology (NIST) publications: NIST publishes documents on various topics related to the Internet, including protocols, processes, and technologies. While they provide a detailed description of the topic, they do not provide implementation details.
4. IEEE publications: The Institute of Electrical and Electronics Engineers (IEEE) publishes papers and articles on various topics related to the Internet, including protocols, processes, and technologies. These resources provide an overview of the topic but do not provide implementation details.
Learn More about protocols here :-
https://brainly.com/question/27581708
#SPJ11
What happens when part of an Internet VoIP transmission is not delivered to the destination?
Answers
Answer: When part of an Internet VoIP transmission is not delivered to the destination, it can result in poor call quality or dropped calls. VoIP technology relies on packet switching, which means that data is broken down into small packets and sent across the Internet to its destination
Explanation: If some of these packets are lost or delayed in transit, it can cause disruptions in the call. VoIP protocols include mechanisms to detect and retransmit lost packets, but if the loss is significant, it can still affect the overall call quality.
When part of an Internet VoIP transmission is not delivered to the destination, the following occurs:
1. Packet loss: During the transmission, data packets containing voice information may be lost or dropped due to network congestion, poor connection, or other issues.
2. Degraded audio quality: The destination receives an incomplete set of data packets, leading to audio artifacts such as choppiness, distortion, or reduced clarity.
3. Retransmission attempts: The VoIP system may attempt to retransmit the missing data packets to improve audio quality at the destination.
4. Error correction: If the VoIP system uses error correction techniques, it may attempt to reconstruct the missing data based on the received packets, mitigating the impact on audio quality.
5. Impact on communication: The overall communication experience may be negatively affected due to the missing part of the transmission, making it difficult for the participants to understand each other.
Learn more about transmission at : brainly.com/question/31063222
#SPJ11
Which syntax imports all static members of class Math? A. import java.lang.Math. B. import static java.lang.Math.C. import static java.lang.MathD. None of the above.
Answers
B. import static java.lang.Math. it is important to use import static judiciously and only when necessary, as it can make code harder to read and understand if overused.
In Java, the import static keyword is used to import static members of a class into another class without having to reference the class name each time. This allows for more concise and readable code, especially when working with static utility classes like java.lang.Math. When using import static, you can directly reference the imported static members by their name, as if they were declared in the current class. For example, you could import the PI constant from java.lang.Math and use it in your code like this: double area = radius * radius * PI;. However, it is important to use import static judiciously and only when necessary, as it can make code harder to read and understand if overused.
Learn more about import static here:
https://brainly.com/question/23091646
#SPJ11
Refer to the exhibit. The network administrator enters these commands into the R1 router:R1# copy running-config tftpAddress or name of remote host [ ]?When the router prompts for an address or remote host name, what IP address should the administrator enter at the prompt?
Answers
When the router prompts for an address or remote host name, the network administrator should enter the IP address of the TFTP server where they want to store the running-config file. This IP address will depend on the specific network setup and the location of the TFTP server within that network.
A Windows Server is a type of operating system designed by Microsoft specifically for use on servers. It provides a wide range of features and capabilities that allow organizations to manage and control their network infrastructure, applications, and data.
Windows Server operating systems offer a variety of services, such as file and print sharing, web hosting, email services, remote host access, and virtualization. They are designed to be scalable, reliable, and secure, making them ideal for use in enterprise environments.
Learn more about remote host here
https://brainly.com/question/30719919
#SPJ11
in the context of the database design process, the conceptual design step that identifies er modules and validates insert, update, and delete rules is _____.
Answers
In the context of the database design process, the conceptual design step that identifies Entity-Relationship (ER) modules and validates insert, update, and delete rules is called "ER Modeling."
The conceptual design step that identifies ER modules and validates insert, update, and delete rules in database design is the Entity Relationship (ER) Modeling step. ER modeling is used to create a conceptual representation of the database that identifies the entities (such as customers, products, and orders) and the relationships between them. During this process, rules for inserting, updating, and deleting data are also established. This step is critical because it lays the foundation for the entire database design and ensures that the final product meets the requirements of the stakeholders.
During the ER Modeling phase, the following steps are performed:
1. Identify entities: Determine the main objects that will be represented in the database.
2. Identify relationships: Determine how entities are related to each other.
3. Define attributes: Identify the properties or characteristics of each entity.
4. Establish constraints: Set rules to maintain data integrity and ensure consistency in the database.
Validating insert, update, and delete rules during the ER Modeling phase is crucial because it ensures that any changes to the data conform to the defined constraints and maintain data integrity. This helps prevent errors and inconsistencies in the database.
Learn more about data integrity here:
brainly.com/question/30075328
#SPJ11
T/F: In the context of the relational database model, projecting involves eliminating columns in a table.
Answers
The given statement "In the context of the relational database model, projecting involves eliminating columns in a table." is true because this process is also known as column selection and is typically used to create a new table that contains only the columns that are relevant to a specific query or analysis.
In the context of the relational database model, "projecting" refers to a specific operation that involves eliminating one or more columns from a table. The resulting table, also known as a "projected table," includes only the columns that are specified in the projection operation.
The projection operation is commonly used in relational database queries to retrieve specific subsets of data from a table. By eliminating columns that are not needed, the projected table can help reduce the amount of data that needs to be processed and improve the efficiency of the query.
Learn more about relational database: https://brainly.com/question/13262352
#SPJ11
Describe the function of a gold-leaf electroscope
Answers
A gold-leaf electroscope is a scientific instrument used to detect the presence and magnitude of electric charge.
The electroscope consists of a glass jar with a metal rod passing through the lid, ending in a metal plate or knob. Two thin gold leaves are suspended from the bottom of the rod inside the jar.
When an electric charge is applied to the metal plate or knob, the charge is conducted through the metal rod and onto the gold leaves, causing them to repel each other and move away from each other. The degree of separation of the leaves indicates the strength of the charge.
The gold-leaf electroscope can be used to detect static electricity and also to distinguish between positive and negative charges. To do this, a known charge of opposite polarity is brought close to the electroscope and observed whether the gold leaves repel or attract each other.
Overall, the gold-leaf electroscope is a simple but effective instrument for detecting electric charges and studying their behavior.
Learn more about gold-leaf electroscope: https://brainly.com/question/30737553
#SPJ11
Question 51
What percentage of the typical American's lifetime exposure to ultraviolet radiation occurs before age 20?
a. 50
b. 60
c. 70
d. 80
Answers
Answer: The research has shown that about 70% of a typical American's lifetime exposure to ultraviolet radiation occurs before the age of 20.
The answer is c. 70.
Explanation:
This highlights the importance of protecting children and young adults from excessive sun exposure to reduce their risk of skin damage and skin cancer later in life.
The percentage of the typical American's lifetime exposure to ultraviolet radiation that occurs before age 20 is approximately 25%. However, this option is not available in the choices you provided.
The closest option would be:
a. 50
Learn more about cancer at : brainly.com/question/8590464
#SPJ11
Which types of communication need a specific data structure to transferring the data?
Answers
Certain types of communication require a specific data structure for transferring data. For example, in computer networks, data is typically transmitted using a protocol such as TCP/IP, which requires specific formatting and encoding of data packets.
Similarly, in database management systems, data is typically stored in a specific format such as tables or records, which need to be structured in a specific way for efficient querying and processing. Other examples include messaging protocols such as XML or JSON, which require specific formatting and syntax for transferring data between systems. In general, any type of communication that involves exchanging data between different systems or applications is likely to require some form of specific data structure or protocol for ensuring efficient and accurate transfer of information.
In order to transfer data effectively, certain types of communication require specific data structures. These types of communication include:
1. Network communication: Data is transferred using packet-based structures that contain metadata, such as IP addresses and port numbers.
2. Database communication: Data is organized into tables, rows, and columns using relational or non-relational data structures for efficient querying and storage.
3. API communication: Data is often exchanged using structured formats like JSON or XML to facilitate interoperability between different systems.
4. Message passing in parallel computing: Data is exchanged between processes or threads using data structures like message queues or shared memory.
By using specific data structures in these communication types, data transfer becomes more efficient and reliable.
Learn more about communication here
https://brainly.in/question/467673
#SPJ11
3) To emphasize the fact that the auditor is independent, a typical addressee of the audit report could be
-Company Controller -Shareholders -Board of Directors
Answers
To emphasize the fact that the auditor is independent, a typical addressee of the audit report could be the Company Controller.
As they are responsible for the financial reporting process within the company and can ensure that the auditor's findings and recommendations are properly implemented. However, the report is also typically shared with the Board of Directors and the shareholders to provide transparency and accountability in the company's financial reporting. Ultimately, the audit report is a crucial tool for all stakeholders to ensure the accuracy and reliability of the company's financial statements.
To emphasize the fact that the auditor is independent, a typical addressee of the audit report would be the Shareholders. This is because the auditor's primary responsibility is to provide an unbiased opinion on the financial statements, ensuring that the interests of the shareholders are protected. The Company Controller and Board of Directors are both part of the company's management, and involving them as primary addressees could potentially compromise the auditor's independence.
Learn more about auditor here:
brainly.com/question/25388600
#SPJ11
5210-1 - To maintain a standard rate turn as the airspeed increases, the bank angle of the aircraft will need to:- remain constant-increase-decrease
Answers
In order to maintain a standard rate turn as airspeed increases, the bank angle of the aircraft will need to decrease. This is because as airspeed increases, the aircraft generates more lift and requires less bank angle to maintain a constant turn rate.
Conversely, as airspeed decreases, the aircraft generates less lift and requires more bank angle to maintain a constant turn rate. Therefore, to maintain a standard rate turn, pilots must adjust the bank angle based on the current airspeed of the aircraft.
.
A standard rate turn is a 360-degree turn completed in 2 minutes, resulting in a turn rate of 3 degrees per second. As airspeed increases, the aircraft's radius of turn also increases. To maintain the same turn rate (standard rate) while the airspeed is increasing, the bank angle must increase to compensate for the larger radius of the turn. This ensures that the aircraft continues to turn at 3 degrees per second, maintaining the standard rate of turn.
Learn more about the airspeed here:-brainly.com/question/29597908
#SPJ11
In TCP, all segments are acknowledged, with the primary exception of pure ACKs.
(t/f)
Answers
True, in TCP, all segments are acknowledged with the primary exception of pure ACKs.
In TCP, acknowledgement is a crucial aspect of ensuring reliable communication between the sender and receiver. Whenever a segment is sent from the sender to the receiver, the receiver must acknowledge the receipt of the segment by sending back an acknowledgement message. This acknowledgement contains a sequence number that corresponds to the next expected segment that the receiver is waiting to receive.
In summary, while all data-carrying segments in TCP require acknowledgement, pure ACKs do not. This is because they serve a different purpose in the protocol and do not introduce any new information into the communication channel.
Know more about the Pure ACKs
https://brainly.com/question/31419748
#SPJ11
a horizontal prop or long beam projecting from a wall to support a balcony, stairs, or similar structure is known as a/an...
Answers
A horizontal prop or long beam projecting from a wall to support a balcony, stairs, or similar structure is known as a cantilever. A cantilever is a structural element that is fixed at one end and projects horizontally to support the weight of the structure at the other end.
The advantage of using a cantilever is that it eliminates the need for additional support columns or posts, creating a more open and spacious design. However, it is important to ensure that the cantilever is designed and constructed properly to prevent structural failure or collapse.
A cantilever works by distributing the weight of the structure it supports onto the wall or other fixed support. The horizontal prop or long beam (cantilever) is firmly attached to the wall, which allows the load to be transferred to the fixed support, making the balcony or stairs stable and secure. The strength and stability of a cantilever depend on the material used and the design of the beam.
Learn more about cantilever here:
brainly.com/question/29290377
#SPJ11
A horizontal prop or long beam projecting from a wall to support a balcony, stairs, or similar structure is known as a cantilever.
Thus, the horizontal prop like structure.
Learn more about horizontal prop: https://brainly.com/question/31547065
#SPJ11
What are three important considerations when planning the structure of an IP addressing scheme? (Choose three.)
Answers
Addressing needs, Scalability, Routing. IP addressing is a crucial component of modern networking, as it allows devices to communicate with each other across a network, and enables the routing of data across the Internet.
Addressing needs: One important consideration when planning the structure of an IP addressing scheme is addressing needs. This involves determining the number of devices that will require IP addresses on the network and how those addresses will be allocated. This is important to ensure that there are enough addresses to meet the needs of all devices on the network, without wasting address space.
Scalability: Another consideration when planning the structure of an IP addressing scheme is scalability. This involves designing the addressing scheme to accommodate future growth and expansion of the network. The addressing scheme should be flexible enough to allow for additional devices to be added without having to reconfigure the entire network.
Routing: The third important consideration when planning the structure of an IP addressing scheme is routing. This involves designing the addressing scheme to support efficient routing of traffic on the network. This includes designing the network so that traffic can be routed quickly and efficiently, with minimal delays or congestion. This can be achieved by dividing the network into smaller subnets, which can be more easily managed and routed.
Learn more about IP addressing here:
https://brainly.com/question/30531412
#SPJ11
How many 72 pin SIMMs are installed in one bank?
Answers
The number of 72 pin SIMMs installed in one bank can vary from 2 to 8, depending on the size of the individual SIMMs and the configuration of the memory bank.
In computer memory terminology, a "bank" refers to a group of memory modules that work together as a unit.
A "72 pin SIMM" is a type of memory module that was commonly used in computers in the 1990s.
A single bank of memory can hold multiple 72 pin SIMMs, but the exact number depends on the type of SIMM and the memory controller of the computer.
The most common type of 72 pin SIMM is the 4MB, 8MB, 16MB, and 32MB varieties.
A bank of memory using 4MB SIMMs would typically have 8 slots, whereas banks of 8MB and 16MB SIMMs would have 4 slots.
Banks using 32MB SIMMs would have 2 slots.
For similar questions Installed
https://brainly.com/question/29407870
#SPJ11
A vacuum carburetor produces a leaner air-fuel mixture as the fuel level in the tank decreases. Why?
Answers
A vacuum carburetor produces a leaner air-fuel mixture as the fuel level in the tank decreases because the vacuum pressure created by the engine's intake decreases as the fuel level drops.
The reason why a vacuum carburetor produces a leaner air-fuel mixture as the fuel level in the tank decreases has to do with the way that the carburetor works. When the fuel level in the tank is high, there is a greater amount of pressure pushing the fuel into the carburetor. As a result, the carburetor is able to mix a greater amount of fuel with the incoming air, resulting in a richer air-fuel mixture. This reduced vacuum pressure results in a weaker suction force, causing less fuel to be drawn into the air stream, thus creating a leaner air-fuel mixture.
However, as the fuel level in the tank decreases, there is less pressure pushing the fuel into the carburetor. This means that the carburetor is not able to mix as much fuel with the incoming air, resulting in a leaner air-fuel mixture. Essentially, the vacuum carburetor is designed to compensate for changes in fuel level by adjusting the amount of fuel that is mixed with the incoming air. This ensures that the engine is able to run smoothly and efficiently, even when the fuel level in the tank is low.
Thus, the reason why a vacuum carburetor produces a leaner air-fuel mixture as the fuel level in the tank decreases is because the carburetor is designed to adjust the fuel mixture based on the amount of pressure pushing the fuel into the carburetor. As the fuel level in the tank decreases, there is less pressure, which means that the carburetor is not able to mix as much fuel with the incoming air, resulting in a leaner air-fuel mixture.
Know more about the vacuum pressure
https://brainly.com/question/13040348
#SPJ11
In Excavations, what must be done when you dig 20' or more down
Answers
When conducting excavations that require digging 20 feet or more down, there are certain precautions that must be taken to ensure the safety of the workers and the integrity of the excavation. Here are some of the key steps that should be followed:
1. Determine the soil conditions: Before beginning the excavation, it is essential to assess the soil conditions to identify any potential hazards. This may include testing the soil for stability, moisture content, and other factors that could affect the safety of the excavation.
2. Develop a safety plan: Based on the results of the soil analysis, a safety plan should be developed that outlines the necessary precautions to be taken during the excavation. This may include shoring or bracing the excavation walls, providing proper ventilation, and implementing measures to prevent soil collapse.
3. Use the right equipment: When digging at such depths, it is essential to use specialized equipment that is designed to handle the challenges of deep excavation. This may include hydraulic shoring systems, heavy-duty excavation machinery, and other specialized tools.
4. Monitor the excavation: Throughout the excavation process, it is important to monitor the site for any signs of instability or other hazards. This may include regular inspections of the excavation walls, monitoring equipment to detect any movement or vibration, and ensuring that workers are properly trained and equipped to handle the conditions.
Overall, excavations that require digging 20 feet or more down can be complex and challenging, but with the right precautions and safety measures in place, it is possible to conduct these operations safely and efficiently.
For such more question on integrity
https://brainly.com/question/30398377
#SPJ11
Ambient temperature Derating Factor: Conductor ampacity adjustment does not apply if the different ambient is 10 feet or less and does not exceed -___ percent of the total length of the conductor.(310-15(a)(2)exception
Answers
According to the National Electrical Code (NEC) 2021 edition, the ambient temperature derating factor for conductor ampacity adjustment does not apply if the temperature difference between the reference ambient temperature and the actual ambient temperature is 10 degrees Celsius .
This exception is specified in section 310.15(A)(2) of the NEC. In other words, if the difference in temperature between the reference ambient temperature and the actual ambient temperature is less than or equal to 10 degrees Celsius (18 degrees Fahrenheit) and is not more than 10 percent of the total length of the conductor, then the ampacity adjustment for temperature derating is not required. This means that the conductor can carry its full rated current without any reduction in ampacity due to temperature derating. It is important to note that this exception applies only under specific conditions, and that proper installation and maintenance of the electrical system are still required to ensure safe and reliable operation.
Learn more about ambient temperature here:
https://brainly.com/question/31229398
#SPJ11
An RTO timer retains the present accumulated value when the false. true/false
Answers
The statement "An RTO (Retentive Timer On) timer retains the present accumulated value when false" is true.
An RTO timer is a type of timer used in programmable logic controllers (PLCs) to accumulate time when its input is true. When the input condition is false, the RTO timer retains the present accumulated value, meaning it does not reset the accumulated time to zero. Instead, it holds the current value until the input becomes true again. This feature is particularly useful for situations where a process needs to be paused and resumed without losing the progress made before the pause.
When the input condition becomes true again, the RTO timer continues counting from the previously accumulated value, effectively allowing for the accumulation of time across multiple true input periods. This is in contrast to non-retentive timers, which reset the accumulated value to zero when the input is false.
In summary, an RTO timer is designed to retain the present accumulated value when the input condition is false, allowing for time accumulation across multiple input periods without losing progress during pauses in the process. This makes it a useful tool in various industrial and automation applications where preserving progress is crucial.
You can learn more about logic controllers at: brainly.com/question/30904951
#SPJ11
The​ _______ the supply​ chain, the less predictable the likelihood and the impact of a​ disruption, and the greater the risk to the effectiveness of the supply chain.
Answers
The longer the length of the supply chain, the less predictable the likelihood and the impact of a disruption, and the greater the risk to the effectiveness of the supply chain.
The longer the supply chain, the less predictable the likelihood and impact of a disruption, and the greater the risk to the effectiveness of the supply chain. This is because as the supply chain becomes longer, it involves more stages and parties, such as suppliers, manufacturers, distributors, and retailers, which increases the complexity of the system and makes it more vulnerable to disruptions. For example, if a supplier in a long supply chain experiences a disruption, it can cause delays in the production process, which can lead to a shortage of goods, increased costs, and lower customer satisfaction. These disruptions can be caused by a variety of factors, such as natural disasters, transportation issues, labor strikes, and supplier bankruptcy, among others.
Learn more about bankruptcy here-
https://brainly.com/question/15277574
#SPJ11
QUESTION 8
Technician A says that NO2 is used by the DPF to convert soot to harmless emissions. Technician B says that the DPF catalysts
convert NO into harmless emissions. Who is correct?
O a. Technician A
O b. Technician B
O c. Both Technician A and Technician B
O d. Neither Technician A nor Technician B
QUESTION 9
Technician A says that some soot leakage between the DPF substrate and the metal shell is acceptable. Technician B says that only
soot leakage from cells on the clean or downstream side of the DPF is acceptable. Who is correct?
a. Technician A
O b. Technician B
O c. Both Technician A and Technician B.
O d. Neither Technician A nor Technician B
Answers
Neither Technician A nor Technician B provides the perfect answer to both enquiries.
How to explain the informationIn response to the first, NO2 is not integral in altering soot into negligible discharges. As an alternative, the DPF utilizes a synthesis of physical filtration and chemical interactions to capture and shift the soot into less detrimental effluent. Nevertheless, NO2 is produced from diesel combustion, consequently leading to smog creation and acid rain.
Concerning the second, any substantiation of soot from the filter element to the metal sheathing is not approved. The aim of the DPF is to detain and contain the soot; therefore, any release can give subscription to augmented emissions and minimized system effectiveness.
Learn more about technician on
https://brainly.com/question/18428188
#SPJ1
Design Specification;
Workshop Area = 1000 sq.ft, Wind Velocity = 99.42 mph, Allowable tensile strength =20 ksi. Now, Find the support reaction.
Answers
The support reaction required to prevent the workshop from being lifted off the ground is 28,300 pounds.
A Guide to Solving Support ReactionAssuming the workshop area is rectangular, let's say its dimensions are 50 ft x 20 ft.
To calculate the wind pressure, we need to convert the wind velocity from mph to ft/s:
99.42 mph = 146.1 ft/s
Assuming the workshop is open on all sides, the wind pressure on each face of the building can be calculated as:
P = 0.00256 x V^2
where P is the pressure in pounds per square foot (psf), and V is the velocity in ft/s.
P = 0.00256 x (146.1)^2
P = 56.6 psf
The total wind force on the workshop is given by:
F = P x A
where A is the area of the workshop.
F = 56.6 psf x 1000 sq.ft
F = 56,600 lb
Assuming the support reaction is the force required to prevent the workshop from being lifted off the ground, we can calculate it as:
R = F / 2
since there are two supports, one on each end of the workshop.
R = 56,600 lb / 2
R = 28,300 lb
Learn more about reaction here:
https://brainly.com/question/30453200
#SPJ1
The coil that serves the inside of the house in a heat pump is known as the _____ _____.
Answers
The coil that serves the inside of the house in a heat pump is known as the evaporator coil/ indoor coil.
In a heat pump system, the indoor coil is an essential component that is responsible for transferring heat between the refrigerant and the indoor air.
Thus, the coil that serves the inside of the house in a heat pump is known as the evaporator coil/ indoor coil.
Know more about the evaporator
https://brainly.com/question/31562018
#SPJ11
What is the maximum number of nodes Z-Wave allows on its mesh network?
231
223
322
232
Answers
The maximum number of nodes Z-Wave allows on its mesh network is 232 (4,294,967,296).
A mesh network is a type of network topology where multiple devices, such as routers or access points, are connected to each other in a non-hierarchical and decentralized manner. In a mesh network, each node communicates with its neighbors, and information can be routed through multiple paths to reach its destination. This redundancy makes mesh networks more reliable and robust than other types of networks, as if one node fails, the rest of the network can continue to operate. Mesh networks are commonly used in large-scale networks, such as wireless sensor networks, IoT devices, and smart home systems, as they can handle a large number of devices and provide seamless connectivity.
Learn more about mesh network here:
https://brainly.com/question/17648902
#SPJ11