A scientist observes and records data for the force of gravity between a star and a few different-sized planets. The planets are all the same distance from the star. Which graph best represents the strength of the gravitational force between the planets and the star? W. X. Y. Z. A. X B. W C. Y D. Z
Answers
The graph that best represents the strength of the gravitational force between the planets and the star is D. Z.
How does this graph represent the gravitational force ?The greater the mass of an object, the greater its gravitational force on other objects. This is because mass determines the strength of an object's gravitational field.
The more massive an object is, the more space it curves around itself, and the more it attracts other objects towards it. This is why planets with larger masses have stronger gravitational forces than smaller objects like asteroids or comets. This is shown in Graph Z.
Find out more on gravitational force at https://brainly.com/question/27943482
#SPJ1
Related Questions
balanced equations for the fischer esterification (methyl 3-nitrobenzoate):
Answers
The balanced equation for the Fischer esterification of methyl 3-nitrobenzoate is:
3-nitrobenzoic acid + methanol + sulfuric acid --> methyl 3-nitrobenzoate + water
The balanced chemical equation is as follows:
[tex]C7H5NO4 + CH3OH + H2SO4 --> C8H7NO4CH3 + H2O[/tex]
In this reaction, 3-nitrobenzoic acid reacts with methanol in the presence of sulfuric acid as a catalyst to form methyl 3-nitrobenzoate and water. It is a classic example of an esterification reaction, where an alcohol and carboxylic acid react to form an ester and water.
Learn more about nitrobenzoate here:
https://brainly.com/question/30889218
#SPJ11
The following nuclear reaction is an example of 226 88 Ra rightarrow 4 2 He + 222 86 Rn alpha decay. beta decay. gamma decay. an impossible reaction. Moving to another question will save this response.
Answers
Certain radioactive nuclides undergo one-step nuclear decay to become stable nuclei. For instance, 60Co, which is unstable, immediately decays to 60Ni, which would be stable.
What is the radon-222 alpha decay equation?The parent atom's mass number is decreased by 4, and its atomic number is decreased by 2. Organization considers, 22286Rn 42He+21884Po 866 222 R ng 2 4 H e + 84 218 P o is the nuclear equation explaining the alpha degradation of 22286Rn 1986 222 R n.
What distinguishes beta decay, gamma decay, and alpha decay?The nucleus loses h+ ions during alpha decay. The nucleus either acquires or loses a proton during beta decay. There is no proton change in gamma decay.
To know more about proton visit :
https://brainly.com/question/1252435
#SPJ1
calculate the ph of a solution containing 200 ml of 0.1 m naoh and 80 ml of 2.5 m acetic acid. give the answer in two sig figs.
Answers
The pH of the solution containing 200 mL of 0.1 M NaOH and 80 mL of 2.5 M Acetic Acid is 2.47.
When we discuss a solution's pH, also known as its "potential of hydrogen" or "power of hydrogen," we are really talking about its hydrogen ion concentration. In other words, the pH scale is used to define whether an aqueous solution is basic or acidic. Acidic solutions with greater H+ ion concentrations often have pH values that are lower than basic or alkaline solutions.
When the solution's pH is less than 7 and the temperature is 25 °C, the solution is acidic. The same holds true for solutions that have a pH higher than 7. They are neutral ions if a solution has a pH of 7 at this temperature.
In pure water, there are 10-7 moles of dissociated hydrogen ions per litre. Based on the proportion of hydrogen ions (H+) relative to pure water, solutions are classified as acidic or basic.
We have acid base solution so net pH will be the amount of H+ left after neutralizing the acid acetic acid with base NaOH
so mole of H⁺ = volume x molarity
= 80mL x 2.5 M = 200 milli moles
similarly mole of base
= 200 mL x 0.1M
= 20 milli moles
so amount of H+ left = moles of acetic acid - moles of NaOH
= 200 millimoles - 20 millimoles
= 180 millimoles
The concentration of H⁺ = moles / volume of water
= 180 millimoles / 280 milliliter
= 0.64 M
pH = -log (H⁺) = -log(0.64 ) = 2.47
Learn more about pH of solution:
https://brainly.com/question/29323762
#SPJ4
The pH of the solution containing 200 mL of 0.1 M NaOH and 80 mL of 2.5 M Acetic Acid is 2.47.
When we discuss a solution's pH, also known as its "potential of hydrogen" or "power of hydrogen," we are really talking about its hydrogen ion concentration. In other words, the pH scale is used to define whether an aqueous solution is basic or acidic. Acidic solutions with greater H+ ion concentrations often have pH values that are lower than basic or alkaline solutions.
When the solution's pH is less than 7 and the temperature is 25 °C, the solution is acidic. The same holds true for solutions that have a pH higher than 7. They are neutral ions if a solution has a pH of 7 at this temperature.
In pure water, there are 10-7 moles of dissociated hydrogen ions per litre. Based on the proportion of hydrogen ions (H+) relative to pure water, solutions are classified as acidic or basic.
We have acid base solution so net pH will be the amount of H+ left after neutralizing the acid acetic acid with base NaOH
so mole of H⁺ = volume x molarity
= 80mL x 2.5 M = 200 milli moles
similarly mole of base
= 200 mL x 0.1M
= 20 milli moles
so amount of H+ left = moles of acetic acid - moles of NaOH
= 200 millimoles - 20 millimoles
= 180 millimoles
The concentration of H⁺ = moles / volume of water
= 180 millimoles / 280 milliliter
= 0.64 M
pH = -log (H⁺) = -log(0.64 ) = 2.47
Learn more about pH of solution:
https://brainly.com/question/29323762
#SPJ4
Why must the halogenated acetanilide 5 be transformed into the amine 6 before introducing iodine into the ring? Explain in terms of the activating power of amide vs amino groups, and the electrophilicity of the iodonium ion
Answers
The halogenated acetanilide 5 must be transformed into the amine 6 before introducing iodine into the ring because of the differences in activating power between amide and amino groups, as well as the electrophilicity of the iodonium ion.
Step 1: Understand activating power.
Activating power refers to the ability of a substituent to increase the reactivity of an aromatic ring towards electrophilic aromatic substitution (EAS). Amide groups (as in acetanilide) are weakly activating, while amino groups are strongly activating.
Step 2: Consider electrophilicity.
Electrophilicity refers to the ability of a molecule or ion to accept electrons from another molecule or ion. The iodonium ion is a highly electrophilic species, which means it readily accepts electrons from nucleophiles.
Step 3: Explain the transformation.
Since the iodonium ion is highly electrophilic, it requires a strongly activating group on the aromatic ring to facilitate the reaction. The amide group in halogenated acetanilide 5 is only weakly activating, which makes it difficult for the iodonium ion to react with the aromatic ring. By transforming the halogenated acetanilide 5 into the amine 6, you introduce a strongly activating amino group, which greatly increases the reactivity of the aromatic ring towards the electrophilic iodonium ion, allowing for the successful iodination of the ring.
To learn more about electrophilicity https://brainly.com/question/31051319
#SPJ11
Determine the solubility for CuC2O4(s) in pure water. Ksp for is 2.9 × 10-8.
A.0.0083 g L-1, B. 0.069 g L-,1, C. 0.026 g L-1, D. 0.18 g L-1, E.0.0036 g L-1
Answers
The solubility of [tex]CuC_2O_4[/tex](s) in pure water is 0.0083 g [tex]L^{-1}[/tex]. The correct option is A.
To determine the solubility of [tex]CuC_2O_4[/tex](s) in pure water, we need to use the Ksp value provided. The balanced dissociation equation for [tex]CuC_2O_4[/tex](s) is:
[tex]CuC_2O_4[/tex](s) ⇌ [tex]Cu^{2}[/tex]+ (aq) + [tex]C_2O_4^{2-}[/tex] (aq)
Since there is a 1:1 ratio between the ions, we can represent the solubility of [tex]CuC_2O_4[/tex](s) as 's'. Therefore:
Ksp = [[tex]Cu^{2+}[/tex]][[tex]C_2O_4^{2-}[/tex]] = s * s = [tex]s^2[/tex]
Given that Ksp = 2.9 × [tex]10^{-8}[/tex], we can find the solubility 's':
[tex]s^2[/tex] = 2.9 × [tex]10^{-8}[/tex]
s = √(2.9 × [tex]10^{-8}[/tex]) = 5.39 × [tex]10^{-5}[/tex] mol [tex]L^{-1}[/tex]
To convert this into grams per liter (g [tex]L^{-1}[/tex]), we need to multiply the molar solubility by the molar mass of [tex]CuC_2O_4[/tex]:
Molar mass of [tex]CuC_2O_4[/tex] = 63.5 (Cu) + 24.01 x 2 (C) + 16 x 4 (O) = 159.62 g [tex]mol^{-1}[/tex]
Solubility (g [tex]L^{-1}[/tex]) = (5.39 × [tex]10^{-5}[/tex] [tex]mol L^{-1}[/tex]) × (159.62 g [tex]mol^{-1}[/tex]) = 0.0086 g [tex]L^{-1}[/tex]
The solubility of [tex]CuC_2O_4[/tex](s) in pure water is closest to option A (0.0083 g [tex]L^{-1}[/tex]).
For more such questions on Solubility.
https://brainly.com/question/23898752#
#SPJ11
. when excess solid mg(oh)2 is shaken with 1.00 l of 1.0 m nh4cl solution, the resulting saturated solution has ph = 9.00. calculate the ksp of mg(oh)2.
Answers
The resulting saturated solution has ph = 9.00. Then the Ksp of Mg(OH)2 is 1.0 * 10^{-20}.
To solve this problem, we need to use the equilibrium expression for the dissolution of Mg(OH)2 in water:
Mg(OH)2(s) ⇌ Mg2+(aq) + 2OH-(aq)
The Ksp expression for this reaction is:
Ksp = [Mg2+][OH-]^{2}
We are given that excess solid Mg(OH)2 is shaken with 1.00 L of 1.0 M NH4Cl solution. This means that NH4Cl is a spectator ion and does not affect the equilibrium. Therefore, we can assume that the concentration of Mg2+ and OH- ions in the saturated solution is equal to the solubility of Mg(OH)2.
To calculate the solubility, we need to use the pH of the solution. We know that pH = 9.00, which means [H+] = 1.0 x 10^-9 M. Since Mg(OH)2 is a strong base, it will react with water to produce OH- ions:
Mg(OH)2(s) + 2H2O(l) ⇌ Mg2+(aq) + 2OH-(aq) + 2H2O(l)
The concentration of OH- ions can be calculated using the pH:
pH = -log[H+]
9.00 = -log[H+]
[H+] = 1.0 * 10^{-9} M
[OH-] = \frac{Kw}{[H+]} =\frac{ 1.0 * 10^{-14} M}{ 1.0 * 10^{-9} M} = 1.0 * 10^{-5} M
Since Mg(OH)2 dissociates to produce two OH- ions, the concentration of Mg(OH)2 in the saturated solution is:
[Mg(OH)2] = [OH-]^{2 }= (1.0 * 10^{-5} M)^{2} = 1.0 * 10^{-10} M
Finally, we can calculate the Ksp of Mg(OH)2 using the solubility:
Ksp = [Mg2+][OH-]^2
Ksp = (1.0 * 10^{-10} M)(1.0 *10^{-5} M)^{2}
Ksp = 1.0 * 10^{-20}
Therefore, the Ksp of Mg(OH)2 is 1.0 * 10^{-20}.
learn more about equilibrium Refer: https://brainly.com/question/30694482
#SPJ11
Answer the following questions based on the chemical reaction shown below.
2AgNO3(aq) + Mg12(aq) -- 2Agl(s) + Mg(NO3)2(aq)
1) Write down the Net lonic Equation (NIE). USE semi-colon () to separate the reactants from the product.
2) Identify all the Spectator lon/s.
Answers
1) The Net Ionic Equation (NIE) for the given chemical reaction is:
Ag⁺(aq) + I⁻(aq) -> AgI(s); this is obtained by removing the spectator ions.
2) The Spectator Ions are: NO₃⁻(aq) and Mg²⁺(aq), as they do not participate in the reaction.
To find the NIE, we first need to break the compounds into their constituent ions:
2AgNO₃(aq) -> 2Ag⁺(aq) + 2NO₃⁻(aq)
MgI₂(aq) -> Mg²⁺(aq) + 2I⁻(aq)
Now, we write the overall ionic equation:
2Ag⁺(aq) + 2NO₃⁻(aq) + Mg²⁺(aq) + 2I⁻(aq) -> 2AgI(s) + Mg²⁺(aq) + 2NO₃⁻(aq)
Next, remove the spectator ions (NO₃⁻ and Mg²⁺) that appear on both sides of the equation:
Ag⁺(aq) + I⁻(aq) -> AgI(s)
To know more about chemical reaction click on below link:
https://brainly.com/question/22817140#
#SPJ11
Devise a procedure to separate the components in a mixture containing lead carbonate, sodium chloride, and 1.4-dichlorobenzene. Use a flow diagram to illustrate each step.
Answers
A procedure and a flow diagram are illustrated according to the chemical reaction.
To separate the components in the mixture, the following procedure can be followed:
Dissolve the mixture in water to obtain a solution.Add dilute hydrochloric acid to the solution to precipitate lead carbonate as a solid.Filter the mixture to obtain the lead carbonate solid.Add sodium hydroxide to the filtrate to precipitate sodium chloride as a solid.Filter the mixture to obtain the sodium chloride solid.Add a nonpolar solvent like ether to the filtrate to extract the 1,4-dichlorobenzene.Separate the ether layer from the aqueous layer.Evaporate the ether to obtain pure 1,4-dichlorobenzene.The flow diagram for the above procedure is as follows:
A mixture containing lead carbonate, sodium chloride, and 1,4-dichlorobenzene → Dissolve in water → Add dilute HCl → Filter → Lead carbonate solid obtained → Filtrate → Add NaOH → Filter → Sodium chloride solid obtained → Filtrate → Add ether → Extract 1,4-dichlorobenzene → Separate ether layer → Evaporate ether → Pure 1,4-dichlorobenzene obtained.
Learn More about flow diagrams
https://brainly.com/question/30425877
#SPJ4
A disk of radioactively tagged benzoic acid 1 cm in diameter is spinning at 20 rpm in 94 cm? of initially pure water (1 mPa, 1 gm/cm²). We find that the solution contains benzoic acid at 7.3 x 10-4 g/cm3 after 10 hr 4 min and 3.43x 109 g/cm’after a long time (i.e., at saturation). What is the mass transfer coefficient? The diffusion coefficient of the acid is 1.8 x10 cm/sec.
Answers
The mass transfer coefficient (K) can be calculated using the following equation: the mass transfer coefficient is 0.005 cm/s and the heat transfer coefficient is 1.248 W/m2K.
K = [tex](C_s - C_i) / (t * A * (C_s - C_i) / C_s)[/tex]
where [tex]C_s[/tex] is the saturation concentration of benzoic acid (3.43x 10^9 g/cm3), [tex]C_i[/tex] is the initial concentration (assumed to be zero), t is the time elapsed (10 hr 4 min or 10.067 hours), A is the surface area of the disk [tex](πr^2 = π(0.5 cm)^2 = 0.785 cm2).[/tex]
Substituting the given values, we get:
K = (3.43x[tex]10^9[/tex] - 0) / (10.067 * 0.785 * (3.43x[tex]10^9[/tex] - 0) / 3.43x[tex]10^9[/tex])
K = 0.005 cm/s
The diffusion coefficient of benzoic acid (D) is given as 1.8 x [tex]10^-5[/tex] cm2/s.
The Sherwood number (Sh) can be calculated as:
Sh = K * D / δ
where δ is the thickness of the boundary layer around the disk, which can be assumed to be approximately equal to the radius of the disk (0.5 cm).
Substituting the values, we get:
Sh = 0.005 * 1.8x[tex]10^-5[/tex] / 0.5
Sh = 1.8x[tex]10^-8[/tex]
The Nusselt number (Nu) can be calculated using the Sherwood number:
[tex]Nu = Sh * Re * Sc^(1/3)[/tex]
where Re is the Reynolds number and Sc is the Schmidt number. Since the flow around the disk is laminar, the Reynolds number is very small (<<1) and can be neglected. The Schmidt number for benzoic acid in water at room temperature is approximately 600.
Substituting the values, we get:
[tex]Nu = 1.8x10^{-8} * 600^(1/3)[/tex]
Nu = 1.04x[tex]10^{-5}[/tex]
Finally, the heat transfer coefficient (h) can be calculated using the Nusselt number and the thermal conductivity of water:
h = Nu * k / δ
where k is the thermal conductivity of water (0.6 W/mK).
Converting the units to cm and substituting the values, we get:
h = 1.04x[tex]10^{-5}[/tex] * (0.6x[tex]10^{4}[/tex]) / 0.5
h = 1.248 W/m2K
Therefore, the mass transfer coefficient is 0.005 cm/s and the heat transfer coefficient is 1.248 W/m2K.
Learn more about benzoic acid
https://brainly.com/question/29010858
#SPJ4
What type of reactive intermediate is formed in the reaction of an alkene with Br2 and H2O to give a bromohydrin? CarbanionRadical Carbocation Cyclic bromonium ion
Answers
The type of reactive intermediate formed in the reaction of an alkene with Br2 and H2O to give a bromohydrin is a cyclic bromonium ion. This is because the Br2 adds across the double bond of the alkene to form a three-membered ring intermediate that has a positive charge on the bromine atom.
This cyclic bromonium ion then undergoes attack by water to give the final product, a bromohydrin. Neither a carbanion nor a carbocation is involved in this reaction, and a radical intermediate is also not formed.
In the reaction of an alkene with Br2 and H2O to form a bromohydrin, the reactive intermediate that is formed is a cyclic bromonium ion.
An alkene is a hydrocarbon compound that contains a carbon-carbon double bond in its molecular structure. Alkenes are unsaturated compounds, which means that they have fewer hydrogen atoms than their corresponding alkane (saturated hydrocarbon) counterparts. They have the general formula of CnH2n, where n is the number of carbon atoms in the molecule.
Alkenes are important in organic chemistry because they undergo a variety of reactions, such as addition reactions, oxidation reactions, and polymerization reactions. They are commonly used in the production of polymers, plastics, and solvents. Some examples of common alkenes include ethene (C2H4), propene (C3H6), and butene (C4H8).
Visit here to learn more about alkene brainly.com/question/31033378
#SPJ11
A 500 ml buffer is prepared containing 0.50 m NH3 and 0.50 m NH4Cl (pkb for NH3 is 4.74). Calculate the change in ph when 0.15 mol of hcl is added (assume total volume stays constant).
Answers
The change in pH after adding 0.15 mol of HCl to a 500 mL buffer containing 0.50 M NH₃ and 0.50 M NH₄Cl is -0.31.
To calculate the change in pH, follow these steps:
1. Calculate the initial pH using the Henderson-Hasselbalch equation: pH = pKa + log([A⁻]/[HA]). For NH₃, pKa = 14 - pKb = 9.26.
2. Find the initial moles of NH₃ and NH₄Cl: moles = Molarity × Volume. 0.50 M × 0.5 L = 0.25 mol each.
3. Determine the reaction between added HCl and NH₃: NH₃ + HCl → NH₄Cl. 0.15 mol HCl reacts with 0.15 mol NH₃, leaving 0.10 mol NH₃ and 0.40 mol NH₄Cl.
4. Recalculate the new concentrations: [NH₃] = 0.10 mol / 0.5 L = 0.20 M; [NH₄Cl] = 0.40 mol / 0.5 L = 0.80 M.
5. Calculate the new pH using the Henderson-Hasselbalch equation: pH = 9.26 + log(0.20/0.80) = 8.95.
6. Determine the change in pH: ΔpH = final pH - initial pH = 8.95 - 9.26 = -0.31.
To know more about Henderson-Hasselbalch equation click on below link:
https://brainly.com/question/13423434#
#SPJ11
17. calculate the number of molecules of o2 required to make 1.44 g of khco3 (ans. 1.30 x 1022 molecules o2)
Answers
To calculate the number of molecules of O₂ required to make 1.44 g of KHCO₃, follow these steps:
1. Determine the molar mass of KHCO₃: K (39.10 g/mol) + H (1.01 g/mol) + C (12.01 g/mol) + 3 * O (3 * 16.00 g/mol) = 100.12 g/mol.
2. Calculate the moles of KHCO₃: (1.44 g KHCO₃) / (100.12 g/mol) = 0.0144 moles KHCO₃.
3. Write the balanced chemical equation for the reaction: 2 K + H₂O + CO₂ + 1/2 O₂ → KHCO₃ + KOH.
4. From the balanced equation, we can see that 1/2 mole of O₂ is required to produce 1 mole of KHCO₃. To find the moles of O₂ needed, multiply the moles of KHCO₃ by 1/2: (0.0144 moles KHCO₃) * (1/2) = 0.0072 moles O₂.
5. Convert the moles of O₂ to molecules using Avogadro's number (6.022 x 10²³ molecules/mol): (0.0072 moles O₂) * (6.022 x 10²³ molecules/mol) = 1.30 x 10²² molecules O₂.
So, 1.30 x 10²² molecules of O₂ are required to make 1.44 g of KHCO₃.
Learn more about Molecules at https://brainly.com/question/475709
#SPJ11
0.110 mol of octane is allowed to react with 0.750 mol of oxygen. which is the limiting reactant?
Answers
the limiting reactant is the octane, and the oxygen is in excess.
To determine the limiting reactant, we need to compare the amount of product that can be formed from each reactant. The balanced chemical equation for the combustion of octane with oxygen is:
2 C8H18 + 25 O2 → 16 CO2 + 18 H2O
According to the balanced equation, 2 moles of C8H18 react with 25 moles of O2 to produce 16 moles of CO2 and 18 moles of H2O. Therefore, the stoichiometric ratio of C8H18 to O2 is 2:25.
Using the given amounts of octane and oxygen, we can calculate how many moles of each reactant are available:
- Moles of octane = 0.110 mol
- Moles of oxygen = 0.750 mol
To determine the limiting reactant, we need to calculate how many moles of each reactant would be required to fully react with the other reactant. Based on the stoichiometric ratio, 2 moles of C8H18 react with 25 moles of O2. Therefore, to fully react with 0.750 mol of O2, we would need:
(2/25) x 0.750 mol = 0.060 mol of C8H18
Similarly, to fully react with 0.110 mol of C8H18, we would need:
(25/2) x 0.110 mol = 1.375 mol of O2
Comparing the moles of each reactant available to the moles required to fully react with the other reactant, we can see that:
- The amount of oxygen (0.750 mol) is greater than the amount required to fully react with the available octane (0.060 mol).
- The amount of octane (0.110 mol) is less than the amount required to fully react with the available oxygen (1.375 mol).
Therefore, the limiting reactant is the octane, and the oxygen is in excess.
Visit to know more about Limiting reactant:-
brainly.com/question/14222359
#SPJ11
Draw a structural formula for the organic product of the following acid catalyzed reaction. acetophenone + 2,4-dinitrophenylhydrazine ----->
-You do not have to consider stereochemistry. -Apply formal charges to any nitro groups. - Do not draw organic or inorganic by-products.
Answers
O
|
C
|
-C
|
=C
O N -O
|
|
O N - O
| | |
-C -N-C
| |
C -C
how many grams of copper(ii) nitrate are needed to produce 39.4 g copper(ii) phosphate in the presence of excess sodium phosphate?
Answers
The 26.6 grams of copper(II) nitrate are needed to produce 39.4 grams of copper(II) phosphate in the presence of excess sodium phosphate.
Why the 26.6 grams of copper(II) nitrate are needed to prodouce 39.4 grams?The balanced chemical equation for the reaction between copper(II) nitrate and sodium phosphate to form copper(II) phosphate is:
Cu(NO3)2 + Na3PO4 → Cu3(PO4)2 + 6NaNO3
From the equation, we can see that one mole of copper(II) nitrate reacts with one mole of sodium phosphate to produce one mole of copper(II) phosphate.
To determine the amount of copper(II) nitrate needed to produce 39.4 g of copper(II) phosphate, we need to use stoichiometry and the molar mass of copper(II) nitrate.
Calculate the molar mass of copper(II) nitrateCu(NO3)2 = 1 x Cu + 2 x N + 6 x OCu(NO3)2 = 1 x 63.55 g/mol + 2 x 14.01 g/mol + 6 x 16.00 g/molCu(NO3)2 = 187.55 g/molCalculate the moles of copper(II) phosphate producedm(Cu3(PO4)2) = 39.4 g ÷ (3 x 31.00 g/mol + 2 x 94.97 g/mol)m(Cu3(PO4)2) = 39.4 g ÷ 277.94 g/molm(Cu3(PO4)2) = 0.1418 molUse stoichiometry to determine the moles of copper(II) nitrate neededFrom the balanced chemical equation, we know that one mole of copper(II) nitrate reacts with one mole of copper(II) phosphate. Therefore, the moles of copper(II) nitrate needed is equal to the moles of copper(II) phosphate produced.n(Cu(NO3)2) = 0.1418 molCalculate the mass of copper(II) nitrate neededm(Cu(NO3)2) = n(Cu(NO3)2) x M(Cu(NO3)2)m(Cu(NO3)2) = 0.1418 mol x 187.55 g/molm(Cu(NO3)2) = 26.6 gLearn more about copper.
brainly.com/question/13677872
#SPJ11
4. Which of these factors would change the value of Vmax?
a. Substrate concentration
b. Enzyme concentration
c. pH
d. Temperature
Answers
Enzyme concentration, pH, Temperature would change the value of Vmax. Correct alternatives are b,c,d.
The maximum velocity (Vmax) of an enzyme-catalyzed reaction is the theoretical maximum rate at which the reaction can proceed, under conditions of saturating substrate concentration. Several factors can affect Vmax:
b. Enzyme concentration: Increasing the amount of enzyme will increase the Vmax of the reaction, as there will be more enzyme molecules available to catalyze the reaction.
c. pH: Changes in pH can affect the Vmax of enzymes by altering the ionization state of amino acid residues that participate in the catalytic reaction, and by changing the shape of the enzyme's active site.
d. Temperature: Changes in temperature can affect the Vmax of enzymes by altering the rate of the catalytic reaction, as well as by changing the shape and stability of the enzyme's active site.
a. Substrate concentration: Changes in substrate concentration affect the rate of the reaction, but they do not directly affect Vmax.
To know more about maximum velocity (Vmax) here:
https://brainly.com/question/30874421#
#SPJ11
Balance the following redox equations by the half-reaction method:
Br2->BrO3- → Br- (in basic solution)
S2O3^2-→ I2->I-+ S4O6^2-
Answers
The balanced redox equation is: [tex]2Br_2 + 2S_2O_3^{2-} + 4OH^- \rightarrow 2Br^- + 2I_2 + S_4O_6^{2-} + 4H_2O[/tex] .The half-reaction method is used to balance redox equations.
What is redox?Redox stands for reduction-oxidation reactions, which are a type of chemical reaction in which electrons are exchanged between two substances. These reactions are essential to many biological and physical processes, such as respiration, photosynthesis, and corrosion. In a redox reaction, one molecule is reduced (gaining electrons) and another is oxidized (losing electrons).
The first step is to break the reaction into two separate half-reactions: oxidation and reduction.
Oxidation: [tex]Br_2 \rightarrow BrO^{3-[/tex]
Reduction: [tex]S_2O_3^2 \rightarrow I_2 \rightarrow I^-[/tex]
Next, the oxidation and reduction half-reactions must be balanced separately for atoms other than oxygen and hydrogen. This includes the [tex]Br_2, I_2, and S_2O_3^{2-.[/tex]
[tex]Br_2 \rightarrow 2BrO_{3-[/tex]
[tex]S_2O_3^2 \rightarrow 2I_2[/tex]
Next, the oxygen and hydrogen atoms must be balanced. This can be done by adding water molecules to the oxidation and reduction half-reactions.
[tex]Br_2 + 2OH\rightarrow2BrO_{3-} + 2H_2O[/tex]
[tex]2S_2O_3^{2-} + 4OH \rightarrow 2I_2 + S_4O_6^{2-} + 4H_2O[/tex]
Finally, the two half-reactions must be combined, taking the number of electrons into account. The oxidation half-reaction has two electrons, and the reduction half-reaction has four electrons. To ensure both half-reactions have the same number of electrons, the oxidation half-reaction must be multiplied by two.
[tex]2Br_{2+} 4OH \rightarrow 4BrO_{3-} + 4H_2O\\ 2S_2O_3^{2-} + 4OH \rightarrow 2I_2 + S_4O6^{2-} + 4H_2O[/tex]
The balanced equation is:
[tex]2Br_2 + 2S_2O_3^{2-} + 4OH^- \rightarrow 2Br^- + 2I_2 + S_4O6^{2-} + 4H_2O[/tex]
To learn more about redox
https://brainly.com/question/21851295
#SPJ4
Ethylene glycol, is used as antifreeze for automobile engines. If you want to produce 2.00 kg of ethylene glycol from the reaction of C2H4Cl2 and Na2CO3 , what is the minimum amount of Na2CO3that is needed?
C2H4Cl2(l)+Na2CO3(s)+H2O(l)→C2H6O2(l)+2NaCl(aq)+CO2(g)
Answers
To calculate the minimum amount of Na2CO3 needed to produce 2.00 kg of ethylene glycol, we first need to determine the balanced chemical equation for the reaction. From the given equation, we can see that 1 mole of C2H4Cl2 reacts with 1 mole of Na2CO3 to produce 1 mole of ethylene glycol (C2H6O2).
The molar mass of C2H6O2 is:
C: 12.01 x 2 = 24.02 g/mol
H: 1.01 x 6 = 6.06 g/mol
O: 16.00 x 2 = 32.00 g/mol
Total: 62.08 g/mol
Therefore, 2.00 kg of ethylene glycol is equivalent to:
2.00 kg = 2,000 g
2,000 g / 62.08 g/mol = 32.24 mol
Since the reaction requires 1 mole of Na2CO3 for every mole of C2H4Cl2, we need at least 32.24 moles of Na2CO3. The molar mass of Na2CO3 is:
Na: 22.99 x 2 = 45.98 g/mol
C: 12.01
O: 16.00 x 3 = 48.00 g/mol
Total: 105.99 g/mol
Therefore, the minimum amount of Na2CO3 needed is:
32.24 mol x 105.99 g/mol = 3,417 g or 3.42 kg
So, we need at least 3.42 kg of Na2CO3 to produce 2.00 kg of ethylene glycol.
Learn more about ethylene glycol here:
https://brainly.com/question/10405060
#SPJ11
To produce 2.00 kg of ethylene glycol from the given reaction, a minimum of 2.87 kg of Na₂CO₃is needed.
The balanced chemical equation for the given reaction is:
C₂H4Cl₂(l) + Na₂CO₃(s) + H₂O(l) → C₂H₆O₂(l) + 2NaCl(aq) + CO₂(g)
From the equation, we can see that the mole ratio of Na₂CO₃ to C₂H₆O₂is 1:1. Therefore, we need to calculate the amount of Na₂CO₃ required to produce 2.00 kg of C₂H₆O₂.
The molar mass of C₂H₆O₂ is:
2 x (12.01 g/mol for C) + 6 x (1.01 g/mol for H) + 2 x (16.00 g/mol for O) = 62.07 g/mol
The number of moles of C₂H₆O₂ required to produce 2.00 kg (or 2000 g) can be calculated as:
n(C₂H₆O₂) = mass/molar mass = 2000 g/62.07 g/mol = 32.22 mol
Since the mole ratio of Na₂CO₃ to C₂H₆O₂ is 1:1, we need 32.22 mol of Na₂CO₃ to produce 32.22 mol of C₂H₆O₂.
The molar mass of Na₂CO₃ is:
2 x (22.99 g/mol for Na) + 1 x (12.01 g/mol for C) + 3 x (16.00 g/mol for O) = 105.99 g/mol
The mass of Na₂CO₃ required to produce 32.22 mol can be calculated as:
mass = n x molar mass = 32.22 mol x 105.99 g/mol = 3,425.8 g = 3.43 kg
Therefore, a minimum of 3.43 kg (or 2.87 kg considering the significant figures) of Na₂CO₃ is needed to produce 2.00 kg of ethylene glycol.
Learn More about Ethylene glycol
https://brainly.com/question/24213993
#SPJ4
A metal object with a mass of 21. 2g is heated to 97 degrees Celsius and then transferred to an insulated container containing 86. 0g of water at 20. 5 degrees Celsius. The water temperature rises and the temperature of the metal object falls until they both reach the same final temperature of 23. 5 degrees Celsius. What is the specific heat of this metal object?
Answers
After calculating and investigating the evaluated specific heat capacity of the given metal for the required question is 0.385 J/g°C
The specific heat capacity of a metal could be evaluated using the formula
Q = m x c x ΔT
here
Q = heat lost by,
m = mass of the sample,
c = specific heat capacity of the given metal,
ΔT = change in temperature.
given,
mass of the metal object 21.2g which was heated to 97°C then send to an insulated vessel having 86.0g of water at 20.5°C.
The given water temperature rises reach the same final temperature of 23.5°C.
We have to calculate Q
Q metal = -Q water
m metal x c metal x ΔTmetal = -m water x c water x ΔTwater
here
ΔTmetal = 23.5 – 97
= -73.5°C
ΔTwater = 23.5 - 20.5
= 3°C.
Staging the values in the given formula
(21.2g) x c metal x (-73.5°C)
= -(86.0g) x (4.184) x (3°C)
Calculating concerning c metal
c metal = 0.385 J/g°C
After calculating and investigating the evaluated specific heat capacity of the given metal for the required question is 0.385 J/g°C
To learn more about specific heat capacity,
https://brainly.com/question/27991746
#SPJ4
when 56.6 g of calcium and 30.5g of nitrogen gas under go a reaction that has 90% yield, what mass of calcium nitride is formed?
Answers
90% of 100.2 g, or 90.18 g, of calcium nitride was produced.
What is chemical reaction?A chemical reaction is a process that changes one group of chemical constituents into another. As reactants are transformed into products, chemical bonds between atoms are formed and broken. Typically, this is an exothermic process that releases energy as heat or light.
Calcium nitride, also known as [tex]Ca_3N_2[/tex], is created by the interaction of calcium and nitrogen gas. The mass of calcium nitride that is produced when 56.6 g of calcium and 30.5 g of nitrogen gas are combined can be calculated using stoichiometry.
The reaction's balanced equation is as follows: [tex]3C_a+N_2- > Ca_3N_2[/tex]
Therefore, 3 moles of nitrogen are needed for every 1 mole of calcium. The following equation can be used to determine the moles of calcium
and nitrogen:
Moles of [tex]C_a[/tex] = 56.6 g / 40 g/mol = 1.415 mol
Moles of [tex]N_2[/tex] = 30.5 g / 28 g/mol = 1.089 mol
Since nitrogen is the limiting reagent and calcium and nitrogen have a mole ratio of 1.089:1.415, the following formula can be used to get the potential calcium nitride yield:
Theoretical yield = 1.089 mol × 92 g/mol = 100.2 g
The actual yield of calcium nitride is 90% of the theoretical yield because the reaction has a 90% yield. Therefore, 90% of 100.2 g, or 90.18 g, of calcium nitride was produced.
To know more about chemical reaction, click-
brainly.com/question/25769000
#SPJ1
Given that ΔHvap is 52.6 kJ/mol, and the boiling point is 83.4oC, if one mole of this substance is vaporized at 1.00 atm, determine the ΔSsurr. The answer should be in J/K*mol.
Answers
The ΔSsurr is: -147.46 J/K*mol.
The given problem requires the determination of the change in entropy of the surroundings (ΔSsurr) when one mole of the substance is vaporized at a pressure of 1.00 atm. The given information is ΔHvap (enthalpy of vaporization) = 52.6 kJ/mol and the boiling point is 83.4°C. To solve the problem, we need to use the formula:
ΔSsurr = -ΔHvap / T
where T is the temperature in Kelvin.
So, we need to convert the boiling point from Celsius to Kelvin by adding 273.15 to the value:
T = 83.4°C + 273.15 = 356.55 K
Next, we convert ΔHvap from kJ/mol to J/mol by multiplying it with 1000:
ΔHvap = 52.6 kJ/mol × 1000 J/kJ = 52600 J/mol
Now, we can substitute these values into the formula to find ΔSsurr:
ΔSsurr = -52600 J/mol / 356.55 K = -147.46 J/K*mol
Therefore, the change in entropy of the surroundings when one mole of the substance is vaporized at 1.00 atm is -147.46 J/K*mol.
To know more about "Entropy" refer here:
https://brainly.com/question/1859555#
#SPJ11
Calculate the energies of the first three energy levels of an electron that is constrained to move on a sphere of radius 50 pm.
Answers
The energies of the first three energy levels of an electron that is constrained to move on a sphere of radius 50 pm are -13.6 eV, -3.4 eV, and -1.51 eV for the n values of 1, 2, and 3, respectively.
The energy levels of an electron constrained to move on a sphere of radius R are given by the equation:
E = -13.6 eV / n²
where n is the principal quantum number.
To calculate the energies of the first three energy levels of an electron that is constrained to move on a sphere of radius 50 pm (0.05 nm), we plug in n values of 1, 2, and 3:
E₁ = -13.6 eV / 1² = -13.6 eV
E₂ = -13.6 eV / 2² = -3.4 eV
E₃ = -13.6 eV / 3² = -1.51 eV
This problem involves calculating the energies of the first three energy levels of an electron that is constrained to move on a sphere of radius 50 pm. The energy levels of a particle constrained to move on a sphere are given by the equation E = -13.6 eV / n², where n is the principal quantum number.
By plugging in n values of 1, 2, and 3, we can calculate the energies of the first three energy levels. It is important to note that the energy levels of a particle that is constrained to move on a sphere are quantized, meaning that the energies can only take on certain discrete values, which are determined by the quantum number n.
To know more about principal quantum number click on below link:
https://brainly.com/question/16725426#
#SPJ11
Given the unbalanced equation: Al2(SO4)3 + Ca(OH)2 + Al(OH)3 + CaSO4 What is the coefficient in front of the CaSO4 when the equation is completely balanced with the smallest whole-number coefficients? A. 1 B. 2 C. 3 D. 4
Answers
The balanced equation with the smallest whole-number coefficients is Al2(SO4)3 + 3Ca(OH)2 → 2Al(OH)3 + 3CaSO4. Therefore, the coefficient in front of the CaSO4 when the equation is completely balanced with the smallest whole-number coefficients is 3 (option C).
To determine the coefficient in front of the CaSO4 when the given unbalanced equation Al2(SO4)3 + Ca(OH)2 → Al(OH)3 + CaSO4 is completely balanced with the smallest whole-number coefficients, follow these steps:
Balance the aluminum (Al) atoms: Place a coefficient of 2 in front of Al(OH)3. Now the equation is:Al2(SO4)3 + Ca(OH)2 → 2Al(OH)3 + CaSO4Balance the sulfur (S) atoms: The equation is already balanced for sulfur atoms.Balance the oxygen (O) atoms: The equation is balanced for oxygen atoms as well.Balance the calcium (Ca) atoms: Place a coefficient of 3 in front of Ca(OH)2 and a coefficient of 3 in front of CaSO4. Now the equation is:
Al2(SO4)3 + 3Ca(OH)2 → 2Al(OH)3 + 3CaSO4
See more about equation in:
https://brainly.com/question/2972832
#SPJ11
pick an appropriate solvent(s) from table to dissolve each of the following substances. Common Polar Solvents Common Nonpolar Solvents water (H2O) hexane (C6H12) acetone (CH3COCH3) diethyl ether (CH3CH2OCH2CH3) methyl alcohol (CH3OH) toluene (C7H8) Part A glucose (polar)
Part B salt (ionic) Part C vegetable oil (nonpolar) Part D sodium nitrate (ionic)
Answers
Part A: Glucose (polar) Appropriate solvent: Water (H2O),Part B: Salt (ionic) Appropriate solvent: Water (H2O),Part C: Vegetable oil (nonpolar) Appropriate solvent: Hexane (C6H12),Part D: Sodium nitrate (ionic) Appropriate solvent: Water (H2O)
Hi! I'd be happy to help you choose appropriate solvents for each substance.
Part A: Glucose (polar)
Appropriate solvent: Water (H2O)
Explanation: Polar solvents dissolve polar substances. Water is a polar solvent and can dissolve glucose, which is also polar.
Part B: Salt (ionic)
Appropriate solvent: Water (H2O)
Explanation: Polar solvents are also effective at dissolving ionic substances. Water, being a polar solvent, can dissolve salt.
Part C: Vegetable oil (nonpolar)
Appropriate solvent: Hexane (C6H12)
Explanation: Nonpolar solvents dissolve nonpolar substances. Hexane is a nonpolar solvent and can dissolve vegetable oil, which is nonpolar.
Part D: Sodium nitrate (ionic)
Appropriate solvent: Water (H2O)
Explanation: Polar solvents can dissolve ionic substances. Water, as a polar solvent, can dissolve sodium nitrate.
learn more about ionic here
https://brainly.com/question/14614762
SPJ11
which ketone you think has the most stable π system? explain your answer clearly based on the carbonyl group
Answers
The most stable compound is the second one (tropone). Aldehydes and ketones are organic compounds that contain a carbonyl functional group; a keton is any member of this family of organic compounds in which the carbon atom is covalently bound to an oxygen atom.
However, because the carbonyl pi link is thermodynamically considerably more stable than the alkene pi bond, the circumstances needed are quite different. Conditions must be forced for a carbonyl group to hydrogenate. Electronic causes ketones are less reactive than aldehydes because the two alkyl groups in ketones more effectively diminish the electrophilicity of the carbonyl carbon than they do in aldehydes.
To know more about ketones, click here:
https://brainly.com/question/4439718
#SPJ4
Estimate the temperature increase in a rubber band when extended to ? = 8 at 20°C. Assume the heat capacity, C, is 2 J/g-K and ? = 1 g/cm?
Answers
To estimate the temperature increase in a rubber band when extended to ? = 8 at 20°C, we need to use the formula Q = mC?T, where Q is the heat absorbed by the rubber band, m is the mass of the rubber band, C is the heat capacity, ?T is the change in temperature.
First, we need to calculate the mass of the rubber band. We know that the density of rubber is ? = 1 g/cm?, and the volume of the rubber band when extended to ? = 8 is:
V = ?r²h = ?(0.4 cm)²(8 cm) = 1.01 cm³
Therefore, the mass of the rubber band is:
m = ?V = 1 g
Now, we can calculate the heat absorbed by the rubber band. When a rubber band is extended, it absorbs energy in the form of work done on it. The work done is:
W = F?x = k(?)?x²/2
where F is the force applied to the rubber band, ?x is the extension, and k(?) is the spring constant of the rubber band. For simplicity, let's assume that the force required to extend the rubber band is constant and equal to 1 N. Then:
k(?) = F/?x = 1/(8/100) = 12.5 N/m
The work done on the rubber band is:
W = k(?)?x²/2 = (12.5 N/m)(0.08 m)²/2 = 0.04 J
This work is converted into heat, which is absorbed by the rubber band. Therefore, Q = W = 0.04 J.
Finally, we can calculate the change in temperature of the rubber band using the formula:
?T = Q/(mC) = 0.04 J/(1 g)(2 J/g-K) = 0.02 K
Therefore, the estimated temperature increase in the rubber band when extended to ? = 8 at 20°C is 0.02 K.
To estimate the temperature increase in a rubber band extended to a stretch ratio (?) of 8 at 20°C, you need to use the provided information: the heat capacity (C) is 2 J/g-K, and the mass per unit length (?) is 1 g/cm. However, we do not have enough information to provide an accurate estimate. We would need to know the work done on the rubber band or any other energy-related parameter to calculate the temperature increase.
Visit here to learn more about temperature brainly.com/question/15267055
#SPJ11
What is the activity series for Copper, Lead, and Zinc with the most active metal at the top of the list?
Answers
The activity series for Copper, Lead, and Zinc in order of decreasing reactivity (most active to least active) is:
Zinc > Copper > Lead
This means that Zinc will displace Copper and Lead from their salts in solution, Copper will displace Lead but not Zinc, and Lead will not displace either Copper or Zinc.
The activity series is a list of metals and their ions in order of their relative reactivity with each other. The most reactive metal is at the top of the list and the least reactive metal is at the bottom of the list.
This series helps to predict the outcome of a chemical reaction between two metals or their ions. When a metal is placed in a solution containing ions of another metal, the metal with a higher position in the activity series will replace the metal with a lower position in the activity series.
Visit here to learn more about activity series brainly.com/question/14129976
#SPJ11
write the second step of the aldol reaction using curved arrows to show electron reorganization. ethanal -->dilute aq NaOH --> aldol
Answers
The second step of the aldol reaction using ethanal and dilute aq NaOH involves the nucleophilic attack of the enolate ion on the carbonyl carbon of another ethanal molecule, forming a new C-C bond and an alkoxide ion.
In the aldol reaction, the first step is the formation of the enolate ion by the deprotonation of the alpha hydrogen of ethanal by NaOH. In the second step, the enolate ion acts as a nucleophile and attacks the electrophilic carbonyl carbon of another ethanal molecule.
The curved arrow originates from the negatively charged oxygen of the enolate ion and points towards the carbonyl carbon, indicating the movement of the electron pair.
As a result, the double bond between the carbonyl carbon and oxygen shifts to form a bond with the oxygen, creating an alkoxide ion. The new C-C bond and alkoxide ion ultimately lead to the formation of the aldol product.
To know more about nucleophilic attack click on below link:
https://brainly.com/question/31279781#
#SPJ11
Draw the lewis structure of NCO⁻ (with minimized formal charges) and then choose the appropriate formal charges for each of the atoms.
A) N = 0, C = 0, 0 = -1 B) N = -1, C = +1, O = -1 C) N = 0, C = 0, 0 = 0 D) N = +1, C = -1, 0 = -1 E) N=-1, C = 0, 0 = 0
Answers
The appropriate formal charges for each atom in the minimized Lewis structure of NCO⁻ are N = +3, C = +1, and O = +1.
To draw the Lewis structure of NCO⁻, we first need to determine the total number of valence electrons in the molecule. N has 5 valence electrons, C has 4, and O has 6, giving a total of 15 electrons. We then place the atoms in a linear arrangement with the N in the center and the C and O on either side. We then place the remaining electrons around each atom to satisfy the octet rule.
N: 5 valence electrons + 2 electrons from a triple bond with C + 1 lone pair = 8 electrons
C: 4 valence electrons + 2 electrons from the triple bond with N = 6 electrons
O: 6 valence electrons + 1 lone pair = 8 electrons
The Lewis structure of NCO⁻ is therefore:
:N≡C:O:
We can then calculate the formal charges of each atom by subtracting the number of lone pair electrons and half the number of bonding electrons from the number of valence electrons for each atom.
Formal charge on N = 5 - 2 - 1 = +2
Formal charge on C = 4 - 2 - 0 = +2
Formal charge on O = 6 - 4 - 1 = +1
To minimize the formal charges, we can move one of the lone pairs from the O to the C, giving:
:N≡C=O:
Formal charge on N = 5 - 2 - 0 = +3
Formal charge on C = 4 - 2 - 1 = +1
Formal charge on O = 6 - 4 - 1 = +1
Therefore, the appropriate formal charges for each atom in the minimized Lewis structure of NCO⁻ are N = +3, C = +1, and O = +1.
Learn more about Lewis structure :
https://brainly.com/question/20300458
#SPJ11
What is zα/2for a 90% confidence interval of the population mean?a) 0.48b) 0.49c) 1.645d) 1.96
Answers
The correct answer is (d) 1.96.
For a 90% confidence interval, we need to find the z-score that corresponds to the middle 90% of the standard normal distribution. This can be done using a z-table or calculator.
Using a z-table, we can find the z-score that corresponds to a tail area of 0.05 (half of the 10% not in the middle). This is 1.645. To get the z-score for the middle 90%, we can double this value to get 1.645 x 2 = 3.29. However, we only need half of this value to get the z-score for the middle 90% (since the other half is in the other tail). Therefore, zα/2 = 1.645/2 = 0.825.
Alternatively, we can use a calculator to directly find the z-score that corresponds to a 90% confidence interval. This is zα/2 = 1.96.
Learn more about confidence here:
https://brainly.com/question/29048041
#SPJ11