a satellite, with a mass of 9.0 x 103 kg, orbits 2.56 x 107 m above earth’s surface. determine its period. group of answer choices 1.1 x 104 s 1.5 x 105 s 4.1 x 104 s 5.7 x 104 s

Some diversification benefits can be achieved by combining securities in a portfolio as long as the correlation between the securities isThe correct answer is C. Between 0 and 1.

Diversification benefits can be achieved by combining securities in a portfolio as long as the correlation between the securities is between 0 and 1. Correlation measures the degree to which two securities move in relation to each other. A correlation of 1 indicates a perfect positive correlation, where the securities move in perfect tandem. A correlation of less than 1 indicates a less than perfect positive correlation, where the securities move somewhat together but not completely. When the correlation is between 0 and 1, it means that the securities have some degree of independence and tend to move differently from each other. This allows for diversification benefits as losses in one security may be offset by gains in another, reducing overall portfolio risk.

Learn more about correlation here:

https://brainly.com/question/28898177

#SPJ11

Answer:

Yes

Explanation:

sorry if im wrong

The required correct answer would be either A (up) or B (down), depending on the specific configuration of the magnetic field and the motion of the electron.

The direction of the acceleration of the electron depends on the interaction between the magnetic field and the motion of the electron. According to the right-hand rule for magnetic fields, the direction of the acceleration can be determined as follows:

Extend the right hand with the thumb pointing in the direction of the electron's velocity (left to right).

Curl the fingers of the right hand in the direction of the magnetic field (into the page).

The direction in which the palm of the hand faces indicates the direction of the acceleration.

Using this right-hand rule, we can determine that the acceleration of the electron will be perpendicular to both the velocity and the magnetic field. Therefore, the acceleration will be either up or down, depending on the specific orientation of the magnetic field and the motion of the electron.

Given the options provided, the correct answer would be either A (up) or B (down), depending on the specific configuration of the magnetic field and the motion of the electron.

Learn more about magnetic fields here:

https://brainly.com/question/14848188

#SPJ4

Answer:

Keyboard and Mobile devices

Explanation:

got it right on edge 2021

Answer:

Outlook allows users to insert symbols and characters not located on the  

keyboard

, but they can have shortcut keys.  

Inserting horizontal lines in the message body breaks up different sections and mostly benefits people using Outlook on  

mobile devices

.

Explanation:

Answer:

i think try theanswer

Explanation:

proper

Answer:

A

Explanation:

For an object to move with constant speed the forward force is opposed by the effects of forces. There is no resultant force acting or constant speed is a result of no resultant force.

Newton's second law states that an object with no net forces acting on it which is initially at rest will remain at rest. If it is moving, it will continue to move in a straight line with constant velocity. Newton's Second Law states: F = ma. F is the net force acting on an object.

Also if velocity or speed is constant the acceleration will be 0 the F=m×0

F=0.

Answer:

i think it's A

Explanation:

Answer:

The answer is A

Explanation:

The total work performed around the thermodynamic cycle in Figure 7 is 350 Joules.
In a thermodynamic cycle, the total work performed is equal to the net area enclosed by the cycle on a pressure-volume (PV) diagram. From the given figure, we can observe that the cycle consists of two quasi-static processes: Process 1-2 and Process 2-3.

In Process 1-2, the system undergoes an expansion at constant pressure, represented by the horizontal line between points 1 and 2 on the PV diagram. As the volume increases, work is done by the system, and the work done in this process is given by the equation W_1-2 = PΔV = 2 * 50 = 100 Joules (where P is the constant pressure and ΔV is the change in volume).

In Process 2-3, the system undergoes compression at constant volume, represented by the vertical line between points 2 and 3 on the PV diagram. Work is done on the system during this process, and the work done in this process is given by the equation W_2-3 = -PΔV = -3 * 50 = -150 Joules (where P is the constant pressure and ΔV is the change in volume).

The total work performed around the cycle is the sum of the work done in each process, i.e., 100 Joules + (-150 Joules) = -50 Joules.
The total work performed around the thermodynamic cycle in Figure 7 is -50 Joules.

To know more about Thermodynamic  ,visit:
https://brainly.com/question/30630564
#SPJ11

Answer:

a. 0.947 m/s^2

b. 1304.54 N

c. 0.0966

Explanation:

mass of car = 13500 N = 13500/9.8 = 1377.55 kg

velocity = 50 km/h = 50,000 m/h = 13.9 m/s

raidus = 204 m

a. centripetal acceleartion = v^2/r = 13.9^2/204 = 0.947 m/s^2

b. centripetal force = m*centripetal acceleration = 1377.55 * 0.947 = 1304.54 N

c. In order for the car to round the curve safely, static friction = centripetal force

static friction = coefficient of friction (mu) * mg = mu* 1377.55*9.8 = 13500mu

13500mu = 1304.54

mu = 1304.54/13500 = 0.0966

The acceleration, force and coefficient of friction is required.

Centripetal acceleration is [tex]0.965\ \text{m/s}^2[/tex]

Centripetal force is [tex]1328\ \text{N}[/tex]

Coefficient of friction is [tex]0.1[/tex]

N = Weight of car = 13500 N

v = Velocity = [tex]50=\dfrac{50}{3.6}=13.89\ \text{m/s}[/tex]

r = Radius = [tex]2\times 10^2\ \text{m}[/tex]

m = Mass of car = [tex]\dfrac{N}{g}[/tex]

g = Acceleration due to gravity = [tex]9.81\ \text{m/s}^2[/tex]

Centripetal acceleration is

[tex]a_c=\dfrac{v^2}{r}\\\Rightarrow a_c=\dfrac{13.89^2}{2\times 10^2}\\\Rightarrow a_c=0.965\ \text{m/s}^2[/tex]

Force is given by

[tex]F_c=ma_c\\\Rightarrow F_c=\dfrac{N}{g}a_c\\\Rightarrow F_c=\dfrac{13500}{9.81}\times 0.965\\\Rightarrow F_c=1328\ \text{N}[/tex]

Coefficient of friction is given by

[tex]\mu=\dfrac{F_c}{N}\\\Rightarrow \mu=\dfrac{1328}{13500}\\\Rightarrow \mu=0.098\approx 0.1[/tex]

Learn more:

https://brainly.com/question/19487466?referrer=searchResults

a. The electric field is  E = (kρa^3/r^2) r

b. The magnitude of the electric field inside the hole of the sphere is (kρa^3/b^2 - kρ(4/3)πa^3/(b^2 - a^2)) j

a)

The electric field inside an insulating sphere with radius a and uniform charge density rho is,

E = (kq/r^2) r

Where

q = volume charge density * volume of the sphere

  = rho*(4/3)πa^3

q = (4/3)πa^3ρ

The electric field is:,

E = (kq/r^2) r

  = (kρa^3/r^2) r

b)

        E = E_solid_sphere - E_hollow_sphere

           E_solid_sphere = (kρa^3/b^2) j

           E_hollow_sphere = -(kρ(4/3)πa^3/(b^2 - a^2)) j

         E = E_solid_sphere - E_hollow_sphere

            = (kρa^3/b^2 - kρ(4/3)πa^3/(b^2 - a^2)) j

Learn more about the electric field:

brainly.com/question/28453368

#SPJ11

For accurate printing of longer storms, it is important to ensure that the events in the array are arranged in the correct order, with a 200ms delay between each event and a 400ms delay between each flash and boom.

When printing longer storms, it is crucial to maintain the correct order of events in the array. By arranging the events in the correct sequence, the storm will be printed accurately, providing a realistic representation. To achieve this, a delay of 200ms should be implemented between each event in the array. This delay ensures that each event is printed with the appropriate timing, creating a smooth and coherent storm simulation.

Additionally, it is necessary to introduce a 400ms delay between each "flash" and "boom" in the storm. This delay creates a distinct gap between these two elements, mimicking the natural occurrence of a lightning flash followed by the accompanying thunder. By allowing sufficient time between the flash and boom, the printed storm will convey a more realistic and immersive experience.

In summary, to accurately print longer storms, it is essential to maintain the correct order of events in the array and introduce appropriate delays. A 200ms delay between each event ensures accurate timing, while a 400ms delay between each flash and boom replicates the natural occurrence of lightning and thunder. Following these guidelines will result in a more realistic representation of storms when printing them.

Learn more about  lightning flash here:

https://brainly.com/question/29361370

#SPJ11

Answer:

When focused light is projected onto the retina, it stimulates the rods and cones. The retina then sends nerve signals are sent through the back of the eye to the optic nerve. The optic nerve carries these signals to the brain, which interprets them as visual images.

Explanation:

Hope it will help u

The resistance (R) of the copper wire in the circuit is 1600 ohms, and the potential (V) at the other end of the wire is 21 volts.

To calculate the resistance of the copper wire (R), we use the formula R = (ρ * L) / A, where ρ represents the resistivity of the material, L is the length of the wire, and A is the cross-sectional area. In this case, the length of the copper wire is 8 mm (0.008 m), and the cross-sectional area is 0.3 mm^2 (0.3 * 10^(-6) m^2). With the resistivity of copper being 6 * 10^7 ohm^(-1) m^(-1), we can calculate the resistance as follows: R = (6 * 10^7 ohm^(-1) m^(-1) * 0.008 m) / (0.3 * 10^(-6) m^2), which gives us 1600 ohms. Since the copper wire and the carbon resistor are connected in series in the circuit, the potential difference (V) across each component is the same. In the case of a thick, high-conductivity copper wire, the small drift speed of electrons requires only a very small electric field, resulting in a negligible potential difference along the wire. As a result, the potential throughout the thick copper wire remains practically uniform.

To learn more about resistance, Click here:

https://brainly.com/question/32522822

#SPJ11

Kinetic energy is the energy that an object possesses due to its motion. Hence, the correct option is [109.5 J].

The formula to calculate kinetic energy is KE = 1/2 mv², where m is the mass of the object and v is its velocity or speed. In this question, the wagon wheel is a ring of mass 77.1 kg and radius 0.630 m. The wagon is moving at 1.22 m/s. We have to calculate the total kinetic energy of the wheel.The velocity of the wagon can be converted into the angular velocity of the wheel by using the formula v = wr. The angular velocity w is calculated as:w = v/rw = 1.22 m/s ÷ 0.630 m ≈ 1.936 rad/sNow that we know the angular velocity of the wheel, we can calculate its total kinetic energy using the formula KE = 1/2 Iw², where I is the moment of inertia of the wheel. For a ring-shaped object, the moment of inertia is given by I = mr².KE = 1/2 Iw²KE = 1/2 (mr²) (w²)KE = 1/2 (77.1 kg) (0.630 m)² (1.936 rad/s)²KE ≈ 109.5 J. Therefore, the total kinetic energy of the wagon wheel is approximately 109.5 J. Note: As per the question, the total kinetic energy of the wheel is required, not of the wagon.

to know more about Kinetic energy visit:

https://brainly.com/question/999862

#SPJ11

Irina should report the best estimate of the length of the room as 4.425 meters.

Irina should report the best estimate of the length of the room by calculating the average of all the measurements.

The average of the six independent measurements can be found using the formula:

Average = (Sum of measurements) / (Total number of measurements)

Therefore, the average of the six independent measurements can be calculated as follows:

Average =

(4.402 m + 4.217 m + 4.345 m + 4.925 m + 4.372 m + 4.289 m) / 6

= 26.55 / 6= 4.425 m

This is the best estimate of the length of the room because it is the average of all the independent measurements made by Irina.

In science, measurements play a vital role. Scientists use a range of tools to measure things, from simple ruler or meter stick to highly sophisticated equipment. It is crucial for the measurements to be as precise and accurate as possible because any error in the measurement can affect the results of experiments.

To minimize the error in measurement, scientists often make multiple measurements and then report the average of those measurements as the best estimate of the measurement.

This process is known as taking the average, or mean, of the measurements. In the example given above, Irina made six independent measurements of the length of the room using a meter stick. She then calculated the average of those measurements and reported it as the best estimate of the length of the room.

This method is widely used in science to minimize the error in measurement and to ensure that the results of experiments are as accurate as possible.

to know more about Arithmetic mean visit:

https://brainly.com/question/14379074

#SPJ11

The Sun would have to shine for approximately 2 billion years for one percent of its mass to be converted into energy.

To calculate the time required for the Sun to convert one percent of its mass into energy, we need to determine the total energy the Sun can produce and then calculate the amount of mass that would be converted.

Energy produced per second by the Sun via the proton-proton chain = 400 trillion trillion joules (4 x 10²⁶joules)

Mass of the Sun = 2 million trillion trillion kilograms (2 x 10³⁰ kilograms)

First, we need to calculate the total energy the Sun can produce per year:

Energy produced per year = Energy produced per second × Number of seconds in a year

Number of seconds in a year = 365 days × 24 hours × 60 minutes × 60 seconds

Number of seconds in a year = 31,536,000 seconds

Energy produced per year = 4 x 10²⁶joules/second × 31,536,000 seconds/year

Now, we can calculate the mass that would be converted to energy:

Mass converted to energy per year = Energy produced per year / (Speed of light)²

The speed of light (c) is approximately 3 x 10⁸meters per second.

Mass converted to energy per year = (4 x 10²⁶ joules/second × 31,536,000 seconds/year) / (3 x 10^8 meters/second)²

Now, let's calculate the mass converted to energy as a percentage of the Sun's total mass:

Mass percentage = (Mass converted to energy per year / Mass of the Sun) × 100

Mass percentage = ((4 x 10²⁶ joules/second × 31,536,000 seconds/year) / (3 x 10⁸ meters/second)²) / (2 x 10³⁰ kilograms) × 100

Finally, we can calculate the number of years required for one percent of the Sun's mass to be converted into energy:

Years = 1% / Mass percentage

Years = 1% / ((4 x 10²⁶ joules/second × 31,536,000 seconds/year) / (3 x 10⁸ meters/second)²) / (2 x 10³⁰kilograms) × 100

After performing the calculations, the result is approximately 2 billion years.

The Sun would have to shine for approximately 2 billion years for one percent of its mass to be converted into energy.

To know more about sun visit:

https://brainly.com/question/28895397

#SPJ11

Answer:

A malleable material is one in which a thin sheet can be easily formed by hammering or rolling. ... In contrast, ductility is the ability of a solid material to deform under tensile stress.

The linear homogeneous recurrence relation with constant coefficients that the sequence is: An = -(-1)n + (3)n or An = (1)n + (3)n

The sequence An = (n-3)(2n) + n(2n) satisfies the linear homogeneous recurrence relation with constant coefficients. In order to prove this, we need to first find the general formula of the sequence.

The formula can be found by replacing n with n+1 as follows:

An+1 = (n+1-3)(2n+2) + (n+1)(2n+2)

An+1 = n(2n+4) + (n+1)(2n+2)

An+1 = 2n² + 4n + 2n² + 4n + n + 2n + 2

An+1 = 4n² + 7n + 2

The characteristic equation of the linear homogeneous recurrence relation is given by:

r² - 2r - 3 = 0

Solving this quadratic equation, we get:r = -1 or r = 3

Hence, the general formula of the sequence is given by:An = A(-1)n + B(3)n

Now, we need to find the values of A and B using the initial values of the sequence. The first two terms of the sequence are given by:

A0 = -6 and A1 = 2

Substituting these values in the general formula, we get:

-6 = A + B2 = -A + 3B

From the above two equations, we can solve for A and B to get:

A = -1 and B = 1

Hence, the linear homogeneous recurrence relation with constant coefficients that the sequence An = (n-3)(2n) + n(2n) satisfies is given by:

An = -(-1)n + (3)n or An = (1)n + (3)n

Learn more about sequences at:

https://brainly.com/question/29127294

#SPJ11

Light is an electromagnetic wave that consists of oscillating electric and magnetic fields. It exhibits various properties, including wavelength, frequency, speed, and polarization.

Polarization refers to the orientation of the electric field vector of a light wave. Unpolarized light consists of electric field vectors oscillating in all possible directions perpendicular to the direction of propagation. Polarized light, on the other hand, has its electric field vectors confined to a specific orientation. Polarization can be achieved through various mechanisms, such as reflection, scattering, or passing light through certain materials. Polarizers, such as polarizing filters, can selectively transmit or block light waves based on their polarization orientation. The study of light and its properties, including polarization, has contributed to numerous advancements in various fields, such as optics, telecommunications, and technology.

To learn more about polarization, https://brainly.com/question/29217577

#SPJ11

The angular momentum of the ball of clay before grazing the surface is (2/3)mrv.

The angular momentum of the ball of clay about the shaft before it grazes the surface is calculated as follows;

Moment of inertia of the ball;

I = (2/3) mr²

where;

Angular velocity is given as;

ω = v / r

where;

The angular momentum of the ball of clay before grazing the surface is calculated as;

L = Iω

L = (2/3)mr² x  (v / r)

L = (2/3)mrv

Learn more about angular momentum here: https://brainly.com/question/7538238

#SPJ4

Answer:

The correct option is (C).

Explanation:

The distance between two charges, [tex]d=10^{-8}\ m[/tex]

We need to find the magnitude of the electrostatic force between two electrons. The formula for the electric force between charges is given by :

[tex]F=\dfrac{kq^2}{r^2}\\\\=\dfrac{9\times 10^9\times (1.6\times 10^{-19})^2}{(10^{-8})^2}\\\\=2.304\times 10^{-12}\ N[/tex]

So, the magnitude of force is equal to [tex]2.30\times 10^{-12}\ N[/tex].

X rays with a wavelength of 0.085nm diffract from a crystal in which the spacing between atomic planes is 0.213 nm . The number of diffraction orders observed is N = 4.

In X-ray diffraction, the diffraction pattern is produced when X-rays interact with the crystal lattice. The number of diffraction orders observed can be determined using Bragg's law:

nλ = 2d sinθ

where n is the diffraction order, λ is the wavelength of the X-rays, d is the spacing between atomic planes, and θ is the angle of incidence.

Rearranging the equation, we have:

n = 2d sinθ / λ

Substituting the given values, d = 0.213 nm and λ = 0.085 nm, we can calculate the value of n.

n = 2 * 0.213 nm * sinθ / 0.085 nm

Simplifying the expression, we find:

n ≈ 4

Therefore, the number of diffraction orders observed is N = 4.

When X-rays with a wavelength of 0.085 nm diffract from a crystal with a spacing between atomic planes of 0.213 nm, four diffraction orders are observed.

To know more about Diffraction, visit

https://brainly.com/question/8645206

#SPJ11

Answer:

the final velocity of the skater after throwing the snowball is 3.17 m/s.

Explanation:

Given;

mass of the ice skater, m₁ = 72 kg

initial velocity of the ice skater, u₁ = 3.1 m/s

mass of the snowball, m₂ = 0.21 kg

initial speed of the snowball, u₂ = 28.0 m/s

Let the final velocity of the skater after throwing the snowball = v

Apply the principle of conservation of linear momentum to determine v;

m₁u₁ + m₂u₂ = v(m₁ + m₂)

72 x 3.1   +  0.21 x 28  = v(72 + 0.21)

229.08 = v(72.21)

v = 229.08 / 72.21

v = 3.17 m/s

Therefore, the final velocity of the skater after throwing the snowball is 3.17 m/s.

Answer:

Batteries are intended to store chemical energy and then it converts into electricidal energy. So overall, batteries produce energy.

Explanation:

Given, Initial speed of the helicopter = 25 m/s. Final speed of the helicopter = 60 m/s, Time taken by the helicopter to change its speed from 25 m/s to 60 m/s is 5 seconds. Therefore, the acceleration of the helicopter is 7 m/s².Hence, option (A) is correct.

To find the acceleration of the helicopter, we can use the formula:

Acceleration= (Final velocity - Initial velocity)/Time,

Acceleration = (60 m/s - 25 m/s)/5 s,

Acceleration = 35 m/s/5 s,

Acceleration = 7 m/s²

Therefore, the acceleration of the helicopter is 7 m/s².

We know that,

Acceleration = change in velocity / time taken,

Acceleration can be defined as the rate at which an object changes its velocity.

It can be measured in units such as m/s², cm/s², etc.

Here, initial velocity = 25 m/s, Final velocity = 60 m/s time = 5 s.

Hence,

Acceleration= (Final velocity - Initial velocity)/Time

Acceleration = (60 m/s - 25 m/s)/5 s

Acceleration= 35/5

Acceleration= 7 m/s²

to know more about acceleration visit:

https://brainly.com/question/30499732

#SPJ11

Answer:

80 m or 81.3 m

Explanation:

Initially it had no velocity(as at rest). Let the height be h

Using conservation of energy:

Initial KE + PE = final KE + PE

(1/2) m(0)² + mgh = (1/2) m(40)² + mg(0)

mgh = (1/2) m (1600)

2gh = 16000

h = 1600/(2*10) {for g = 10}

h = 80

80 For g = 9.8, h = 81.3 m

Using Newton's eqⁿ of motion:

v² = u² + 2aS

40² = 0² + 2(g)S

1600/2g = S

For g = 10, S = 80 m

g = 9.8, S = 81.33 m

Answer:

magnetic force due to gravity

Explanation:

nowno that is because that's what the geography teacher taught us back in don't remember but it's true

Answer:

Stars i think

Explanation:

Answer:

0.05 m/s

Explanation:

We start by finding the average velocity of water in the pipe. This is done by saying

R(e) = ρv(avg)d/μ

Where,

R(e) = Reynolds number, and that's 2000

ρ = Density of water, 1000 kg/m³

μ = Viscosity of water, 10^-3

d = diameter of pipe

v(avg) = average velocity

Since we're interested in average velocity, we make v(avg) the subject of formula. So that

V(avg) = R(e).μ/ρ.d

V(avg) = 2000 * 10^-3 / 1000 * 0.08

V(avg) = 2 / 80

V(avg) = 0.025 m/s

The maximum flow rate of water in the pipe usually is twice the average velocity, and as such

V(max) = 2 * V(avg)

V(max) = 2 * 0.025

V(max) = 0.05 m/s