a round flat metal coil has 180 turns and negligible resistance. it is connected in a series circuit with a resistor, with nothing else in the circuit. you measure that a current flows through the resistor when a magnetic field through the coil, perpendicular to its area, is changing at what is the radius of the coil?

Answer:

Explanation:

Thousands of avalanches occur in Canada each year. They happen in all regions of Canada, but are more frequent in the mountains of British Columbia, Yukon and Alberta. Avalanches can be triggered by wind, rain, warming temperatures, snow and earthquakes. They can also be triggered by skiers, snowmobiles, hikers, vibrations from machinery or construction.            Avalanche facts:

An avalanche occurs when a layer of snow collapses and slides downhill.

Avalanches are caused by four factors: a steep slope, snow cover, a weak layer in the snow cover and a trigger.

Roads and railway tracks may be rerouted to reduce risks.

Safe avalanches may be triggered in dangerous snow packs.

Avalanches can travel up to 90 km/h.

After one hour, only one in three victims buried in an avalanche is found alive. The most common causes of death are suffocation, wounds and hypothermia.

The force divided by the product of the wire length and current through the wire gives the strength of magnetic field. The magnetic field here is 0.1 Tesla.

A magnetic field can be produced from the deflecting coil or wire carrying current. The magnetic field lines produced will be perpendicular  to the field lines from the electric field.

The force acting on the combined field is the product of the magnetic field strength B, length of the wire L, and the current passing  through the wire I as written below:

F = B I L

Given that the length L = 0.50 m

current I =  8 A

and force f = 0.40 N.

Thus, magnetic field strength B = F/I L

=  0.40 / ( 0.50 m× 8 A)

= 0.1 T.

Therefore, the field strength is 0.1 T.

To find more on magnetic field, refer here:

https://brainly.com/question/14848188

#SPJ1

If we are going to invent a new device that people can use instead of a microwave oven to warm up leftovers, the type of electromagnetic wave that would be most useful to investigate would probably be infrared waves.

Electromagnetic waves or EM waves are waves that are created as a result of vibrations between an electric field and a magnetic field.

Since electromagnetic waves are of different energy range and different electromagnetic waves are used for different works.

Higher energy range electromagnetic waves cannot be used to expose for human because they can cause damage to them. So, we can not use them for warming purpose as they are dangerous. So X rays and Gamma rays can not be used

And least energy waves can also not be used. So, radio waves which are least energy cannot be used for the purpose of warming.

So correct answer for the replacement of microwaves is infrared waves because they have sufficient energy that can be used to warm up.

learn more about electromagnetic waves:

https://brainly.com/question/3101711

#SPJ4

A inverse relationship in between photon's energy (E) and the light's wavelength is described by the formula E=hcE=hc, where h has so far been Planck's constant and c is actually the speed of light.

Energy --> Frequency The energy of light increases with its frequency.

Higher frequencies result in shorter wavelengths, as the challenges mentioned above demonstrate.E is also equal to h c / λ.Short wavelengths & high energies characterize high frequency light.

Energy is inversely correlated with wavelength because it is directly related to a electromagnetic frequency of the photon.The energy of a photon increases with its frequency.

To know more about frequency visit:

https://brainly.com/question/5102661

#SPJ4

A suspension scaffold that uses a two point swing stage anchorage is preferably accessed from the ground or from a rooftop, and then either raised or lowered to its working location.

A two point adjustable suspension scaffold is sometimes referred to as a swing-stage scaffold and it is considered as the most common type of suspended scaffold.

Additionally, a two point adjustable suspension scaffold is designed and developed to be hung by cables (ropes) that are connected to stirrups at each end of the swing-stage scaffold platform, in order to enable the access of high-rise constructions and buildings.

According to the occupational safety and health administration (OSHA), a two point adjustable suspension scaffold can be accessed through the use of a ladder. However, the most preferred method of access is from the ground or from a rooftop, and then the scaffold should be either raised or lowered to its working location.

Read more on OSHA here: https://brainly.com/question/1278624

#SPJ1

A diffraction pattern involving parallel rays is called (c) Fraunhofer diffraction.

Because of the far-field location of observation and the increasingly planar nature of the outgoing diffracted waves passing through the aperture, Fraunhofer diffraction is a type of wave diffraction that takes place when field waves are passed through an aperture or slit. This only results in a change in the size of the observed aperture image.

The parallel rays approximation can be used to view it at distances beyond the near-field distance of Fresnel diffraction, which modifies the size and form of the observed aperture image. This only happens when the Fresnel number at these distances.

Fraunhofer diffraction, which is typically explained through the use of observational experiments utilizing lenses to intentionally diffract light, is based on the notion that a wave is split into many outgoing waves when passing through an aperture, slit, or hole. When waves pass through, they are split into two diffracted waves that move at right angles to one another and the remaining incoming wave. These waves are frequently used in observational techniques by placing a screen in their path so that the image-pattern observed can be seen.

Fraunhofer's diffraction equation:

= (See Diffraction - Single-slit diffraction):

= I (θ) = I 0 (sin (d π λ sin θ) d π λ sin θ) 2

where,

d is the slit width, λ is the wavelength, and θ is the observed angle.

To know more about Fraunhofer Diffraction:

https://brainly.com/question/30115938

#SPJ4

The removal of the periosteum causes shock, distress, tissue damage, and skin puncture. The fusing of vertebrae increases the stability, strength, and shape of the spine. But it will add stress and increase the rate of spine degradation.

The periosteum is the covering that surrounds the bones and supplies the bone with blood, nerves, and cells they require to develop and heal. The bone receives nutrients and sensations from this.

If the periosteum and the muscle are removed because of the accident, it will cause distress and severe shock. Because the nerve in this is helpful in the sensation of pain caused by tissue damage. So when this periosteum is removed, the lack of sensation will limit the regeneration of osteoblasts.

The muscle surrounding will also affect balance, and stability. Also, cause more damage or skin puncture.

Advantages:

Disadvantages:

To know more about periosteum:

https://brainly.com/question/1408966

#SPJ4

The sensation of colour is seen when light falls on the eye's cones.

The retina, a component of the eye, is what detects light entering our eyes. The pupil is the black hole in the centre of the eye that lets the light into the eye.

Light-sensitive cells can be found in the retina of the eye. It contains two kinds of cells known as rods and cones. Cones are the cells of retina that produce colour sensation. These photoreceptor cells are responsible for colour vision.

Rod cells are photoreceptor cells in the retina that function in dim light better than the other type of visual photoreceptor, cone cells.

Rods are employed in peripheral vision and are often clustered at the borders of the retina.

To know more about eye:

https://brainly.com/question/1536544

#SPJ4

Two forces that make up electromagnetic forces related both the electric and magnetic forces are caused by the motion of charged particles such as electrons and is therefore denoted as option C.

This is referred to as the type of force which explains how both moving and stationary charged particles interact due to it occurs between electrically charged particles such as a

The electric and magnetic forces which are present are usually caused by the motion of charged particles such as electrons which is therefore the reason why option C was chosen as the correct choice.

Read more about Electromagnetic here https://brainly.com/question/19042165

#SPJ1

This graph shows the potential at the origin as -100 V. The x-axis represents distance from the origin and the y-axis represents the potential.

Potential is the ability to become real or actual. It is the capacity to do something, to become something, or to produce something. Potential is not something that is tangible or visible, but instead is an idea or concept. Potential is the potential to become something greater than what it is currently.

The graph shows that the potential decreases linearly with distance from the origin, indicating that the field has a uniform strength. The graph also shows that the potential at any given distance is equal to the potential at the origin (the y-intercept) minus the product of the distance and the field strength.

To know more about Potential:

https://brainly.com/question/30114261

#SPJ4

By sending ultrasonic waves into to the water and listening for the returned echoes, a sonar may find these items.

So order to determine which way fish schools are travelling, fish finders employ high frequencies of tightly focused ultrasound that is transmitted at high voltage.

When a sonar signal or sound wave hits an object, it bounces back into the water.The signal is partially reflected back to the vessel by the fish, while the remaining portion travels to the ocean floor before returning to the boat.

To know more about ultrasound waves visit:

https://brainly.com/question/14694921

#SPJ4

The propagated percent error in the time constant of a circuit is ±10% using these two circuit elements in series with a d. c. power supply.

The discrepancy between the measured and actual values might be used to define an error.

The fourth band of a resistor color code is gold means ± 5% tolerance in measurement of resistor.

The fourth letter on a capacitor's code is j means ± 5% tolerance in measurement of capacitor.

Now,  the time constant of a RC circuit = CR.

Hence, the propagated percent error in the time constant of a circuit using these resistor and capacitor =  ± 5%  + (± 5%)

= ±10%.

Find more about error, refer the link:

https://brainly.com/question/13089857

#SPJ1

The 2 in MgCl2 indicates that in the given compound there are 2 ions of Chlorine used.

As we know,

The valency of Magnesium is 2, while the valency of Chlorine is 1.

So, for forming a compound we need 2 ions of Chlorine with 1 ion of Magnesium.

MgCl2 is commonly known as Magnesium bromide which is formed by the combination of magnesium and bromine.

In chemistry for representing a diatomic molecule, or simply the molecules which have 2 atoms, we often use the symbol of the element and include 2 in the subscript for indicating that two atoms of that element are joined together.

For more questions on Magnesium bromide

brainly.com/question/25947089

#SPJ4

Answer: A. 20000 Nm

Explanation:

The Work formula is:

Work = Force x Displacement

For this question:

Force is 200N

Displacement is 100m

So 200N x 100m = 20000Nm

Hope this helps!

i) The pressure exerted by the oil on the base of the tank is 12495 Pascal.

ii) The force exerted by the oil on the base of the tank is 44982 Newton.

The force delivered perpendicularly to an object's surface per unit area across which that force is dispersed is known as pressure.

Density of the oil: ρ = 850 kg/m³

Depth of the tank: d = 1.5 m

dimensions  of rectangular base = 2.4 m × 1.5m.

We know that: acceleration due to gravity: g = 9.8 m/s².

i) the pressure exerted by the oil on the base of the tank: P= dρg

= 1.5 m × 850 kg/m³ × 9.8 m/s²

= 12495 Pascal.

ii)  the force exerted by the oil on the base of the tank:

F = pressure × area

= 12495 Pascal ×  2.4 m × 1.5m.

= 44982 Newton.

To learn more about pressure, refer the link:

https://brainly.com/question/12971272

#SPJ1

For a neutral atom of radon-222, the number of protons is 86, the number of neutrons is 136, and the number of electrons is 86.

A neutral atom can be described as one in which the amount of the positive charge is equal to the of amount the negative charge. Therefore, the net charge on the atom will be equal to zero. Therefore, such type of atom is said to be a neutral atom.

For a neutral atom, we usually say that the number of electrons in an atom is equal to the number of protons. All chemical elements which are arranged in the modern periodic table are in their neutral state.

Given, the atomic number of Radon-22 is 86.

Atomic number = the number of electrons = Number of protons

The number of electrons for the neutral atom of Rn = 86

The number of protons in Rn-222 = 86

The number of neutrons = 222 - 86 = 136

Learn more about the neutral atom, here:

brainly.com/question/5308494

#SPJ1

Aerobic respiration occurs in the mitochondria's cytoplasm. Anaerobic respiration results in the production of two ATP molecules. Prokaryotes, which are human muscle cells, engage in anaerobic respiration. Thus, option C is correct.

All species' cells engage in cellular respiration. Utilizing oxygen, the cell converts the food (glucose) into carbon dioxide and water. The process of breaking down glucose while using oxygen is referred to as aerobic respiration.

Therefore, all living organisms carry out some form of respiration.

Learn more about respiration here:

https://brainly.com/question/19490229

#SPJ1

A downward force is applied by the ladybug to the wall in order to advance up the wall, and a vertical force is applied by the wall to the ladybug.

The definition of force is the power or fuel applied to an item during any positive exercise or movement. A pressure or pull that results from two objects interacting is called a force. External force doesn't actually exist until two objects interact.

Forces are important because they produce changes to motion, as we learned in a prior lesson. Isaac Newton actually cites this in his first law. This inertia concept describes the phases of stillness and motion that occur in the absence of an external, opposing force.

To know more about force visit:

https://brainly.com/question/13191643

#SPJ4

Your electric utility company sends you a monthly bill informing you of the number of kilowatt- hours you have used that month therefore the utility is charging you for energy.

This is referred to as a type of service such as light, power etc which are  provided by a public utility.

Electricity utility send us a monthly bill of the number of unit consumed by our appliance per month and the amount you owe is derived by multiplying your utility's rate per kWh by the total kWhs you used that month. It is also how much energy is used over a certain time period which is therefore the reason why energy was chosen as the correct choice.

Read more about Utility here https://brainly.com/question/5374399

#SPJ1

The link between the work function, W, and maximum electron energy, E m an x, for a given wavelength, can be determined using the formula = h max, where h is the Planck constant and c is the speed of light.

The electron moves to a state with higher energy after receiving the energy. The electron absorbs the extra energy and releases it by the opposite process known as emission to return to its ground state. To be in the lowest energy level, an electron requires precisely -13.6 eV of energy.

A material experiences the photoelectric effect when it is subjected to electromagnetic radiation, such as light when electrons are released. They are referred to as photoelectrons.

To learn more about energy emitted by electrons from given link

brainly.com/question/30011257

#SPJ4

Inductance is 42.0 mh, capacitance is c, and resistance is r in the part h a l - r - c series circuit. The angular frequency of oscillation without the resistor is 624 rad/s. The angular frequency with the resistor is 208 rad/s.

The difference between frequency and angular frequency (measured in radians per second) is twofold (measured in cycles per second, commonly known as Hz). Instead of the letter f, the sign stands in for frequency. a sphere with an axis around which it spins. The points farther from the axis are fulfilling and moving more quickly = v / r.

inductance (L) = 42 mH

                = 42 × 10⁻³ H

Angular frequency (ω) = 620 rad/sec

without the resistor, the angular frequency of oscillation is,

ω = 1/ √LC

or,  1/√LC = 620 rad/sec

or, 1/LC =  (620)²

or, C = 1 / (620)²× (42 × 10⁻³)

or, C = 6.19 × 10⁻⁵ F

With resistor, ω = 208 rad/sec

or, ω = R/L

or, R = ωL

or, R = (42 × 10⁻³) × (208)

or, R = 8.736 Ω.

To know more about Angular frequency visit:-

https://brainly.com/question/29107224

#SPJ4

Question:

An L-R-C series circuit has inductance 42.0 mH, capacitance C, and resistance R. Without the resistor, the angular frequency of oscillation is 624 rad/s. With the resistor, the angular frequency is 208 rad/s.

Find the value of C.

Find the value of R.

In chemistry, +2 charge indicates that if the given atom, molecule, or compound needs to lose 2 of its electrons for becoming a cation.

In chemistry,

We often use two types of symbols, one is positive and the other is negative.

If at the top of any atom/compound/molecule + is written it means that the particular atom/molecule/compound needs to lose 2 electrons, as it has 2 excess electrons, and when the atom loses 2 of its electrons then the octet of the electrons will be formed in the outermost orbit, and the atoms become cationic in the nature.

We know, Ions are usually formed by the losing or gaining of electrons,

So, we can say that, if the atom loses any electrons then + sign will be given similarly when the atom gains any electrons then the negative sign will be given.

For more questions on Anions and Cation

https://brainly.com/question/29881975

#SPJ4

Yes i would personally get better results and be more motivated by participating in physical activities that are competitive or recreational.

My motivation would increase if I engaged in leisure physical activity. Because you must aspire for victory, competitive hobbies may come with a lot of responsibilities. Regular exercise will make you happy regardless of whether you're doing it to compete or just for the sake of it. similar to team sports like baseball, soccer, basketball, badminton, and volleyball. Because you'll be with people who share your passion for the sport but aren't competing with you, these leisure activities are a good idea.

To know more about force, visit:

https://brainly.com/question/13191643

#SPJ1

Out of all the human-influenced climate factors examined by the IPCC, CO2 has the highest positive RF overall. Other gases are capable of trapping heat more effectively than CO2 does, molecule for molecule.

When coal, oil, natural gas, and other carbon-rich fossil fuels are burned, carbon dioxide is released into the atmosphere. Despite not being the most potent greenhouse gas, carbon dioxide.

What's so significant about CO2 is this: A greenhouse gas, that is. The atmosphere's CO2 hence helps to confine heat near to Earth. It is beneficial for Earth to retain some of the energy it receives from the Sun so that it does not entirely escape back into space.

To know more about carbon dioxide visit:-

https://brainly.com/question/21943405

#SPJ4

The net force on Planet Y because the gravitational force between planet XY and planet YZ is 5F₀.

Full question is in the attachment. Formula to calculate the gravitational force between two objects

F = G × (m₁ × m₂ ÷ r²)

The direction of the gravitational force between two objects on the first object is from the first object to the second object. The gravitational on planets X and Z

F₀ = G × (m₁ × m₃ ÷ r₃²)

F₀ = G × (M₀ × 9M₀ ÷ (3R₀)²)

F₀ = G × (9M₀² ÷ 9R₀²)

F₀ = G × (M₀²/R₀²)

On planet Y there are two forces

The net force on planet Y

F = F₂ - F₁

F = 9F₀ - 4F₀

F = 5F₀

Learn more about the gravitational force here: https://brainly.com/question/28654549

#SPJ4

Option D; A great strength of correlational research is the fact that it occurs in real-world settings.

When doing correlational research, which is a type of nonexperimental study, the researcher examines two variables and assesses their statistical relationship (i.e., the correlation) with little to no effort made to account for unrelated variables. Since it helps us to ascertain the magnitude and direction of correlations between two variables, correlational research is helpful. Contrarily, correlation is limited since it only provides evidence of a link and provides little information about its underlying mechanisms. Through the correlational method, relationships between variables are sought. For instance, a researcher would be interested to know if a user's privacy preferences in a social networking software are influenced by their personality, IQ, level of education, employment status, age, gender, income, and other factors

Learn more about  correlational research here:

https://brainly.com/question/29783805

#SPJ4

Duodenum, duodenal flexure, mesentery, ileocecal junction, Ileum, jejunum.

A section of the small intestine. It is linked to the stomach. Food that has just left the stomach is further digested in the duodenum. It absorbs water and nutrients from meals so that the body can use the vitamins, minerals, carbs, fats, and proteins. The big intestine receives food that has been broken down in the small intestine (also called the large bowel or colon). The large intestine, which is approximately five feet long, removes the majority of the water from the meal and gives it to the body. The remainder travels via the colon and is expelled from the body as feces (stool).

Learn more about Duodenum here:

https://brainly.com/question/8098134

#SPJ4

Answer:

Communication is a vital component to the scientific process. It helps the scientist, if he/she was making an invention, tell people or get advice about  the project, which couldn't be done without communication. Scientists need to communicate to learn, get advice, and collaborate with one another.

The acceleration due to gravity on asteroid X is approximately 0.5 m/s². The acceleration an object experiences as a result of gravitational force is known as acceleration due to gravity.

       The mass of the astronaut = 500 Newtons / 9.8 m/s^2, 50 Kg

        The equation for gravitational force is F = Gm1m2/r^2,

Calculate that the acceleration due to gravity on asteroid X = 0.49 meters per second squared.

That is 0.5 m/s²

To learn more about acceleration due to gravity refer :

https://brainly.com/question/88039

#SPJ1