a rocket with mass 1.2*10^6 has a relativistic kinetic energy of 2.6*10^23 how fast is the rocket moving toppr

The block's acceleration magnitude would be greater than the sphere's linear acceleration magnitude as the sphere's energy goes into rotational motion, whereas the frictionless block only has linear motion.

In order to find the incline angle (θ) that results in a linear acceleration of the center of the sphere with a magnitude of 0.109, we'll use the following equation for a rolling sphere:
a = (5/7) * g * sin(θ)
where a is the linear acceleration (0.109), g is the acceleration due to gravity (approximately 9.81 m/s²), and θ is the incline angle. Rearranging the equation to solve for θ, we get:
sin(θ) = a / [(5/7) * g]
Plugging in the values, we have:
sin(θ) = 0.109 / [(5/7) * 9.81]
Now, find the inverse sine (arcsin) to get the angle:
θ = arcsin(sin(θ))
For a frictionless block sliding down the incline at the same angle, its acceleration magnitude would be given by:
[tex]a_{block}[/tex] = g * sin(θ)
Comparing the two equations, we can see that the rolling sphere's acceleration (a) is equal to (5/7) * a_block. Since (5/7) is less than 1, the rolling sphere's acceleration is less than the frictionless block's acceleration. Therefore, the acceleration magnitude of the frictionless block would be more than 0.109. The reason for this difference is that some of the sphere's energy goes into rotational motion, whereas the frictionless block only has linear motion.

Learn more about acceleration here: https://brainly.com/question/12550364

#SPJ11

The wavelength of the radio wave is approximately 3.87 meters.

The speed of light in a vacuum is a constant value, which is approximately 3.00 x 10⁸ meters per second. The wavelength of a wave can be calculated by dividing the speed of light by the frequency of the wave.

Where λ is the wavelength, c is the speed of light, and f is the frequency.

Substituting the given values into the formula, we get:

Therefore, the wavelength of the radio wave is approximately 3.87 meters.

To learn more about wavelength of the radio wave, here

https://brainly.com/question/11304922

#SPJ1

When a brick (brickA) is resting on a rough incline, the friction force acting on the brick along the incline depends on a few factors. First, let's discuss the forces acting on the brick (brickA). The weight of the brick acts vertically downward due to gravity, and this force can be represented as the weight vector. We can decompose the weight vector into two components: one parallel to the incline (weight_parallel) and one perpendicular to the incline (weight_perpendicular).

The friction force acting on the brick (brickA) along the incline is opposing the component of the weight vector parallel to the incline (weight_parallel). The force of friction is determined by the product of the normal force (which in this case is equal to weight_perpendicular) and the coefficient of friction between the brick and the incline (brickC).
Now, let's analyze the given options:
A. Equal to the weight of the brick - This is incorrect, as the friction force is only equal to the weight_parallel component, not the entire weight of the brick.
B. Less than the weight of the brick - This is correct. The friction force acting on the brick along the incline is opposing the weight parallel component, which is always less than the total weight of the brick.
C. Greater than the weight of the brick - This is incorrect, as the friction force is only acting against the weight parallel component and cannot be greater than the total weight of the brick.
D. Zero - This is incorrect. Since the brick is on a rough incline, there will be a friction force acting against the weight parallel component.
So, the correct answer is B. The friction force acting on the brick along the incline is less than the weight of the brick.

For more information on friction force see:

https://brainly.com/question/1714663

#SPJ11

If 10 decibels is 10 times more intense than one decibel, then 20 decibels would be 100 times more intense than one decibel (10 times more intense than 10 decibels). Therefore, the answer is c. 100.

Sound is measured in decibels (dB). A whisper is about 30 decibels, a normal conversation is about 60 decibels, and a motorcycle engine runs about 95 decibels.

Noise levels above 70 decibels for long periods of time can begin to damage your hearing. Noise above 120 decibels can damage your hearing.

A 20 dB increase in noise represents a 100-fold increase in noise. This is because dB is a logarithmic unit, and an increase of 20 dB corresponds to a positive factor of 10^ (20/10) = 100.

Therefore, a sound that is 20 dB louder than another sound is 100 times stronger. Likewise, a 40-decibel increase in noise means one sound is 10,000 times louder than another, and so on.

Therefore, the correct answer is 100.

Learn more about Decibel:

brainly.com/question/13047838

#SPJ11

The actual amount of radiation that a person is exposed to depends on where they live, what job they do and many other things. Scientists must always take into consideration the amount of background radiation when working or experimenting with radioactive sources and discount it from their results.

Background radiation is the radiation that is present in the environment naturally and cannot be eliminated completely. However, it can be reduced through various measures such as limiting exposure to sources of radiation, using protective gear, and adopting safe practices.A source that emits one particle per second has an activity of one Bq. However, this particle could be alpha or beta and would, therefore, have a different effect on a person’s body.

learn more about Background radiation here

https://brainly.com/question/31561778

#SPJ11

The only thing that can be said with certainty about Alphard is that it appears brighter in the night sky than the star Megrez, which has an apparent magnitude of 3.3.

Alphard is one of the brightest stars in the constellation Hydra, while Megrez is part of the constellation Ursa Major. However, without more information, it is difficult to determine any other characteristics of Alphard beyond its brightness. Alphard can refer to a few different things, so here are some possible meanings: Alphard (star): Alphard is the common name for the star Alpha Hydrae, which is located in the constellation Hydra. It is a bright, orange giant star that is visible in the night sky from many parts of the world. Alphard (car): Alphard is also the name of a luxury minivan produced by the Japanese automaker Toyota. It was first introduced in 2002 and is known for its spacious interior, comfortable ride, and advanced safety features. Alphard (fictional character): Alphard is a character from the anime and manga series "Canaan". She is a skilled assassin and the main antagonist of the series.

Learn more about Alphard here:

https://brainly.com/question/18312623

#SPJ11

Alphard is a bright star with an apparent magnitude of 2.0, which makes it one of the brightest stars in the night sky.

This means that Alphard appears brighter than Megrez, which has an apparent magnitude of 3.3.

However, the apparent magnitude of a star does not provide a complete picture of its characteristics, and there are many other factors to consider when studying stars.

One thing that can be said with certainty about Alphard is that it is a single star located in the constellation Hydra.

It is a type K supergiant, which means that it is a very large and bright star that is nearing the end of its life cycle. Alphard is also known for its orange-red color, which is a result of its surface temperature and chemical composition.

However, there are many other characteristics of Alphard that are not known with certainty, such as its distance from Earth, its mass, and its age.

These factors can only be determined through more detailed observations and measurements.

In conclusion, while Alphard is a bright star with an apparent magnitude of 2.0, there is much more to learn about its characteristics and properties.

The study of stars is an ongoing process, and scientists are constantly working to gain a deeper understanding of these celestial bodies.

To know more about celestial bodies here

https://brainly.com/question/28876984

#SPJ11

For a Symmetrical airfoil, the center of pressure stays at the same place as AOA increases. This is because the airflow is evenly distributed above and below the airfoil, resulting in equal pressure on both sides. As a result, there is no lift generated at zero angle of attack, and the center of pressure remains at the 25% chord point.

As the angle of attack increases, the lift increases, but the distribution of pressure remains symmetrical, keeping the center of pressure in the same place.
Furthermore, there is no pitching moment about the center of pressure for a symmetrical airfoil. This is because the forces acting on the top and bottom surfaces of the airfoil are equal and opposite, resulting in no net moment. As a result, symmetrical airfoils are often used in aerobatic and high-speed applications where stability and control are critical.
In conclusion, for a symmetrical airfoil, the center of pressure remains at the same place as AOA increases, and there is no pitching moment about the center of pressure. These characteristics make symmetrical airfoils a popular choice for high-speed and aerobatic applications.

learn more about pressure here

https://brainly.com/question/3371255

#SPJ11

Any object that has mass and is in a gravitational field is subjected to a force called its weight.

Weight is a force that results from the interaction between an object and the gravitational field of another object, such as the Earth. The weight of an object is proportional to its mass, which is a measure of the amount of matter it contains.

The formula for weight is W = m x g, where W is weight, m is mass, and g is the acceleration due to gravity. Weight is a vector quantity, meaning it has both magnitude and direction. In everyday life, weight is often used interchangeably with mass, but they are actually two different properties of matter.

To know more about gravitational force, here

brainly.com/question/1798131

#SPJ4

a. The total kinetic energy of two moving objects can be zero. This is true because the kinetic energy depends on the mass and speed of the objects. If two objects with equal mass move in opposite directions with the same speed, their kinetic energies will cancel out, resulting in a total kinetic energy of zero.

b. The total momentum of two moving objects can be zero. This is also true because momentum is the product of an object's mass and velocity. If two objects with equal mass move in opposite directions with the same velocity, their momenta will cancel out, resulting in a total momentum of zero.

c. The kinetic energy of an object doubles if the speed of an object doubles. This statement is not true. The kinetic energy of an object is proportional to the square of its speed, which means that if the speed of an object doubles, its kinetic energy increases by a factor of four.

d. If the kinetic energy of a system increases, the momentum of the system also must increase. This statement is not necessarily true. The momentum of a system depends on the mass and velocity of the objects in the system, while the kinetic energy depends only on the speed of the objects. It is possible for the kinetic energy of a system to increase without a corresponding increase in momentum, or vice versa.
Hello! Here's an analysis of the given statements:

a. The total kinetic energy of two moving objects can be zero: False. Kinetic energy is always positive, so the sum of two positive values cannot be zero.

b. The total momentum of two moving objects can be zero: True. If the magnitudes of their momenta are equal and opposite, they can cancel each other out, resulting in a total momentum of zero.

c. The kinetic energy of an object doubles if the speed of an object doubles: False. Kinetic energy is proportional to the square of the speed (KE = 0.5 * m * v^2), so if the speed doubles, the kinetic energy will increase by a factor of 4, not 2.

d. If the kinetic energy of a system increases, the momentum of the system also must increase: False. It is possible for the kinetic energy to increase without a change in the total momentum (e.g., in a collision where the final velocities are equal and opposite).

So, the true statement among the options is: (b) The total momentum of two moving objects can be zero.

To know more about kinetic Energy click here.

brainly.com/question/15764612

#SPJ11

The word from the list that best fits the definition Value that is measured by the slope of a position-time graph is

A position-time graph, also known as a displacement-time graph, is a graph that shows the position or displacement of an object on the vertical axis versus time on the horizontal axis.

It is a graphical representation of an object's motion with respect to time, where the slope of the line represents the object's velocity at any given point.

The position-time graph is commonly used in physics to analyze an object's motion and to determine important parameters such as velocity, acceleration, and displacement.

Learn more about position-time graph at

https://brainly.com/question/25225415

#SPJ1

A No. 12 THHN conductor is required for a 19.7-ampere load if the ambient temperature is 75F and there are nine current-carrying conductors in the raceway.

To determine the size of the THHN conductor required for a 19.7-ampere load, we will need to use the ampacity tables from the National Electric Code (NEC).

The ampacity tables provide the maximum current-carrying capacity of various types and sizes of conductors based on factors such as ambient temperature and the number of current-carrying conductors in the raceway or cable.

Assuming a copper conductor, we can use NEC Table 310.15(B)(16) to find the ampacity of a No. 12 THHN conductor at an ambient temperature of 75F with nine current-carrying conductors. According to the table, the ampacity of a No. 12 THHN conductor with nine current-carrying conductors at 75F is 20 amperes.

Learn more about the THHN conductor at

https://brainly.com/question/31197467

#SPJ4

False. In a balanced 3 wire wye circuit, the grounded neutral conductor is not considered a current carrying conductor. The neutral conductor carries only the unbalanced current resulting from the difference in the currents flowing through the three phase conductors.

The neutral conductor is grounded to provide a reference point for the voltage of the circuit, and to provide a path for the unbalanced current to return to the source.

In a balanced 3 wire wye circuit, the three phase conductors carry equal currents that are 120 degrees out of phase with each other. The voltages of the three phase conductors also differ by 120 degrees, and when they are connected to a load, they produce a balanced three-phase voltage.

The grounded neutral conductor in a 3 wire wye circuit is typically connected to earth ground at the transformer or generator supplying the circuit. The purpose of grounding the neutral conductor is to provide a reference point for the voltage of the circuit, and to provide a path for the return of unbalanced currents. Unbalanced currents can occur when the three phase loads are not equal or when there are single-phase loads connected to the circuit.

When the three-phase loads are balanced, the neutral conductor carries only the unbalanced current, which is the difference in current between the three phase conductors. The magnitude of the unbalanced current is typically small compared to the phase currents, and the neutral conductor is not considered a current-carrying conductor under normal operating conditions.

However, if the circuit becomes unbalanced due to a fault or other abnormal condition, the neutral conductor can carry significant currents that can cause overheating and other problems. For this reason, the neutral conductor must be sized appropriately to handle the maximum expected unbalanced current, and the grounding system must be designed to detect and clear faults quickly.

To know more about transformer

brainly.com/question/15200241

#SPJ11

The material that is not ferromagnetic is d. Ai (aluminium). While iron (Fe), cobalt (Co), and nickel (Ni) are ferromagnetic metals, aluminium is a non-magnetic metal.

Ferromagnetism is the ability of a material to become permanently magnetized when exposed to an external magnetic field. Ferromagnetic materials include iron (Fe), nickel (Ni), cobalt (Co), and some of their alloys, such as FeCo, FeNi, and FeCoNi. These materials have a magnetic moment that aligns with an external magnetic field, resulting in a net magnetic moment and magnetic behaviour. Aluminium, on the other hand, is not ferromagnetic and does not exhibit this type of behaviour.

To learn more about ferromagnetic, refer:-

https://brainly.com/question/31140686

#SPJ11

To make an aircraft invisible to a radar system operating at 405 MHz, a minimum thickness of 18.5 cm of coating would be required.

The minimum thickness of coating needed to render an aircraft invisible to a radar system depends on the wavelength of the radar signal and the properties of the coating material. The general principle is that the coating should be at least a quarter of the wavelength of the radar signal in thickness.

The wavelength of a radar signal can be calculated using the formula:

λ = c / f

where λ is the wavelength in meters, c is the speed of light (299,792,458 m/s), and f is the frequency in Hz.

For a radar system operating at a frequency of 405 MHz (405 x 10⁶ Hz), the wavelength of the signal is:

λ = 299,792,458 m/s / (405 x 10⁶ Hz) = 0.739 meters

To render an aircraft invisible to this radar band, the minimum thickness of the coating should be a quarter of the wavelength, or:

t = λ / 4 = 0.739 meters / 4 = 0.185 meters = 18.5 cm

Therefore, a minimum thickness of 18.5 cm of coating would be needed to render an aircraft invisible to a radar system operating at a frequency of 405 MHz.

Find out more on radar systems here: https://brainly.com/question/17192382

#SPJ1

The direction of operation in involving a sanitary landfill should be perpendicular to the prevailing wind. This is because it helps to prevent the spread of odors and other matter that may be carried by the wind.

It also ensures that the wind does not cause litter and debris to be blown out of the landfill, which can contribute to environmental pollution. So, the correct answer is b. perpendicular to the wind .Pollution is the introduction of harmful materials into the environment. These harmful materials are called pollutants. Pollutants can be natural, such as volcanic ash. They can also be created by human activity, such as trash or runoff produced by factories. Pollutants damage the quality of air, water, and land.

To know more about Pollution please vist :-

https://brainly.com/question/28519286

#SPJ11

Answer:

4.0 m/s

Explanation:

The maximum speed would occur if all of the potential energy was converted to kinetic

U = K 16 = ½ mv2 16 = ½(2)v2

The period of the voltage source that operates the plasma pencil is the time it takes to complete one cycle of oscillation.

The plasma pencil is a device that uses a high-voltage source to generate plasma, which can be used for various applications such as sterilization and surface modification. The period of the voltage source that operates the plasma pencil is the time it takes for the voltage to complete one cycle of oscillation. In general, the period of a voltage source is determined by the frequency of the alternating current (AC) that it generates. The frequency is measured in Hertz (Hz), which represents the number of cycles per second.

The specific period of the voltage source that operates the plasma pencil depends on the design and specifications of the device. Typically, plasma pencils operate at high frequencies ranging from tens of kilohertz to several megahertz. This high frequency allows for efficient plasma generation and control. The period of the voltage source that operates the plasma pencil is determined by the frequency of the AC it generates and can vary depending on the design and specifications of the device.

know more about voltage here:

https://brainly.com/question/27861305

#SPJ11

The people 100 km away listening to their radios via radio waves receive the news first.

To determine who receives the news first, we need to compare the time it takes for the radio waves and sound waves to travel to their respective listeners. Let's use the formula:
time = distance / speed
For radio waves, the distance is 100 km (100,000 m) and the speed of radio waves is the speed of light, which is approximately 3 x 10^8 m/s. So the time for radio waves:
time_radio = 100,000 m / 3 x 10^8 m/s ≈ 3.33 x 10^-4 s
For sound waves, the distance is 3.0 m and the speed of sound in air is given as 343 m/s. So the time for sound waves:

time_sound = 3.0 m / 343 m/s ≈ 0.0087 s
Comparing the two times, we see that time_radio (3.33 x 10^-4 s) is much smaller than time_sound (0.0087 s).

Therefore, the people 100 km away listening to their radios via radio waves receive the news first.

learn more about radio waves Refer: https://brainly.com/question/17781887

#SPJ11

The answer is d. one mercury rotation period, 59 earth days.

This is because Mercury rotates very slowly compared to its orbit around the sun, so it takes 59 Earth days for Mercury to complete one rotation on its axis and experience one day/night cycle. Therefore, the astronauts will have to wait for one Mercury rotation period or 59 Earth days to see the sunset at the same spot where they started.
In the future, when astronauts are exploring Mercury, they will have to wait for two Mercury rotation periods, or 119 Earth days (option E), to see the next sunset at the same spot.

Learn more about mercury here: https://brainly.com/question/9418447

#SPJ11

This statement is true. The question mentions the terms "recommended", "maximum", "length", and "gravity", which all relate to the design and installation of a gravity flow absorption field.

The answer is true because the recommended maximum length for the system materials is 75 feet, which means that if the length exceeds this limit, it may affect the absorption capacity and efficiency of the system. This highlights the importance of following the recommended guidelines and standards to ensure the proper functioning and longevity of the absorption field.
The statement "The recommended maximum length of the system materials for a gravity flow absorption field is 75 feet" is true. This length ensures proper functioning and efficiency of the system, taking into consideration gravity and absorption processes.

Learn more about gravity here:- brainly.com/question/31321801.

#SPJ11

Gravity causes cars to slow down when driving uphill and speeds them up when driving downhill.

Gravity has a significant impact on the speed and motion of a car going uphill and downhill. When a car is going uphill, gravity acts against the car's motion, making it more difficult for the car to climb the slope.

The force of gravity pulls the car back and slows it down, which means that the car needs to work harder to maintain a constant speed or accelerate.

On the other hand, when a car is going downhill, gravity works in the car's favor, accelerating its motion. The force of gravity helps the car to move faster down the slope, and the car may require less power from the engine to maintain a given speed.

However, the driver must also take care to control the car's speed and braking to ensure safety.

Learn more about gravity at

https://brainly.com/question/31321801

#SPJ4

The frequency of light in a vacuum that has a wavelength of 71200 m is 4.213 kHz.

The frequency of light is obtained from the ratio of the speed of light and wavelength of light. The frequency,ν = c / λ, where c is the speed of the light in vacuum and is equal to 3×10⁸ m/s and λ is the wavelength of light.

From the given,

the wavelength of light = 71200 m

speed of light = 3×10⁸ m/s

Frequency =?

ν = c / λ

=  3×10⁸ / 71200

= 4.213 kHz.

The frequency of light in a vacuum is 4.213 kHz.

To learn more about the frequency and wavelength of wave:

https://brainly.com/question/10170594

#SPJ1

The most common form of gas in the interstellar medium is: C) atomic hydrogen

The interstellar medium is primarily composed of atomic hydrogen, which makes up around 70-80% of the total gas content. Molecular hydrogen, molecular helium, atomic helium, and ionized hydrogen are also present, but in smaller amounts.

The interstellar medium (ISM) is the matter and radiation that exists in the space between stars in a galaxy. It is composed of gas (mostly hydrogen and helium) and dust and is the raw material from which new stars and planets are formed. Atomic hydrogen is the most abundant form of gas in the ISM, making up about 75% of its mass. It is mostly found in a cool, neutral state, meaning that its electrons are in their lowest energy state and it is not ionized. Other forms of gas in the ISM include molecular hydrogen (H2), which is the main component of molecular clouds and is where new stars form, and ionized hydrogen (H II), which is formed when hydrogen atoms lose their electrons and become positively charged ions.

To learn more about interstellar medium, refer:-

https://brainly.com/question/29770890

#SPJ11

In Chapter 2 section 2.21, it is stated that in a cathode ray tube, electrons pass from the cathode to the anode. This is because the cathode is negatively charged, while the anode is positively charged.

The flow of electrons is controlled by an electric field between the cathode and anode, which causes the electrons to move towards the anode. Therefore, the correct answer to the question is option B) electrons pass from the cathode to the anode.

In Chapter 2, Section 2.21, regarding a cathode ray tube, the correct answer is B) electrons pass from the cathode to the anode. The cathode emits electrons, which are attracted to the positively charged anode, resulting in the flow of electrons in the tube.

To know more about Electrons click here .

brainly.com/question/1255220

#SPJ11

The maximum flow rate allowed for the well, expressed in MGD, is 3.01.

To calculate the maximum flow rate allowed for the well, we need to use the following formula:

Maximum Flow Rate = (Maximum Chlorine Output in Pounds per Day) / (Dosage in mg/L x 8.34)

Here, the maximum chlorine output is given as 100 pounds per day, and the dosage required is 3.75 mg/L. Plugging these values into the formula, we get:

Maximum Flow Rate = (100 pounds/day) / (3.75 mg/L x 8.34)

Maximum Flow Rate = 3.01 MGD (rounded to two decimal places)

Therefore, the maximum flow rate allowed for the well, expressed in MGD, is 3.01.

Learn more about flow rate

https://brainly.com/question/27880305

#SPJ4

The magnification of an object at a distance of twice the focal length is 1. This means that the object appears the same size as it would if it were viewed without any optical device.

Focal length is the distance between the center of a lens and the point where light rays converge to form a sharp image. It is measured in millimeters and is a critical factor in determining the angle of view of the lens, or how wide or narrow the field of view will be. A shorter focal length will produce a wider angle of view and a longer focal length will produce a narrower angle of view. For example, a wide angle lens typically has a focal length from 8mm to 35mm, while a telephoto lens has a focal length from 70mm to 300mm.

This is because the light rays that are refracted by the lens are spread out evenly so that no magnification occurs.

To learn more about focal length
https://brainly.com/question/28039799
#SPJ4

A grindstone, initially at rest, is given a constant angular acceleration so that it makes 20.0 rev in the first 8.00 s. Its angular acceleration is E) 3.93 rad/s²

To find the angular acceleration of the grindstone, we can use the following equations:
1. θ = ω₀t + (1/2)αt², where θ is the angular displacement, ω₀ is the initial angular velocity, t is the time, and α is the angular acceleration.
2. 20 rev = 20(2π) rad, to convert revolutions to radians.
Given that the grindstone is initially at rest, ω₀ = 0. We are also given that the grindstone makes 20 revolutions in 8 seconds, so θ = 20(2π) rad and t = 8 s.
Using the equation θ = (1/2)αt², we can solve for α:
20(2π) = (1/2)α(8²)
40π = 32α
Now, divide both sides by 32 to find the angular acceleration:
α = 40π/32 = 5π/4
α ≈ 3.93 rad/s²
Therefore, the angular acceleration of the grindstone is approximately 3.93 rad/s², which corresponds to option E.

To learn more about angular acceleration, refer:-

https://brainly.com/question/29428475

#SPJ11

After a perfectly inelastic collision, the combined objects move at 5 m/s.


In a perfectly inelastic collision, the two objects stick together after colliding.

To find the final speed, we can use the conservation of momentum principle, which states that the total momentum before the collision equals the total momentum after the collision.

The initial momentum is (0.25 kg × 10 m/s) + (0.25 kg × 0 m/s) = 2.5 kg m/s.

After the collision, the combined mass is 0.5 kg.

To find the final velocity (v), we can use the formula:

total momentum = combined mass × final velocity, so 2.5 kg m/s = 0.5 kg × v, which gives v = 5 m/s.

For more such questions on objects, click on:

https://brainly.com/question/28308143

#SPJ11

Answer: During an endothermic chemical process, the temperature of the system typically decreases.

Explanation: Chemical processes can be both exothermic or endothermic, it actually depends on whether heat is released or absorbed during the reaction. In an endothermic reaction, energy is absorbed from the surroundings, mostly in the form of heat, causing the temperature of the system to decrease. This is because the reaction requires energy to break the bonds of the reactants and form new bonds in the products. Examples of endothermic reactions include melting ice, evaporating water, and cooking an egg  

To learn more about endothermic process,

https://brainly.in/question/3131321

The correct solution to this question here is option C.) Both reach the bottom at the same time.

This is because both the disk and hoop have the same mass and radius, and there is no slipping involved. Therefore, they will have the same acceleration down the inclined plane and will reach the bottom at the same time. B.) The disk

The disk reaches the bottom of the incline first because it has a smaller moment of inertia compared to the hoop. This results in the disk having a greater acceleration down the inclined plane, allowing it to reach the bottom faster than the hoop.

Visit here to learn more about radius brainly.com/question/13449316

#SPJ11