A rocket is launched straight up with a speed of 12 meters per second near the surface of Earth. [Neglect air friction.]

Answers

Answer 1

Answer:

Explanation:

H = V² / (2·g)

H = 12² / (2·9.8) ≈ 7,3 m

Answer 2

Answer:

By conservation of energy,

Kinetic energy of launched rocket = change in potential energy of rocket at maximum height.

→ Ig h is maximum height reached:

A Rocket Is Launched Straight Up With A Speed Of12 Meters Per Second Near The Surface Of Earth.[Neglect

Related Questions

URGENT!! ILL GIVE
BRAINLIEST!!!! AND 100 POINTS!!!!!

Answers

Since the boat is moving in a direction with 5 meters per second without any added force of rowing, it means it is in motion at the same rate of 5 meters. This means the motion is the equivalent to the speed in which it events. Even Newton first law stated ''every object will remain at rest or in uniform motion in a straight line unless compelled to change its state by the action of an external force.''

SO: based on the choices the answer is D or The boats motion stays the same!

Answer: D or The boats motion stays the same!

Answer:

It stays the same. D.

Explanation:

If no forces are acting on the boat other than the current the boat's motion should stay the same. Hope you are satisfied with this answer please give me a good rating.

Aspirin therapy has been used after ________ or recurrent _________ to reduce the risk of recurrence. Aspirin is contraindicated for anyone with ______________ ___________.

Answers

Answer: Aspirin is recommended as initial treatment to prevent recurrent ischemic stroke. Clopidogrel is recommended as an alternative monotherapy and in patients allergic to aspirin. The combination of clopidogrel and aspirin is not recommended for long-term use (more than two to three years) because of increased bleeding risk. Aspirin has been shown to lower the risk of heart attack and stroke in patients who have cardiovascular disease.

Explanation:

nshbwlhcj.s,ncdj dhd

Answers

Answer: yes

Explanation:

1900 J of heat is added to 90 g of water at an initial temperature of 18°C. What is the temperature of the water?

Answers

1900 J of heat or thermal energy is added to 90 g of water at an initial temperature of 18°C than temperature of the water 21402 K.

What is  thermal energy?

The energy present in a system that determines its temperature is referred to as thermal energy. Thermal energy flows as heat. Thermodynamics is a whole field of physics that studies how heat is transmitted across various systems and how work is performed in the process.

Given in the question 1900 J of heat is added to 90 g of water at an initial temperature of 18°C.

heat = mass*specific heat*change in temperature

1900 = .09 Kg*1*ΔT

ΔT =    21111

final temperature  = 21111 + 291 K

final temperature = 21402 K

1900 J of heat or thermal energy is added to 90 g of water at an initial temperature of 18°C than temperature of the water 21402 K.

To learn more about thermal energy refer to the link:

brainly.com/question/13552918

#SPJ1

25pts

When Joel is riding his bicycle, he and the bicycle have a combined mass of 91.4 kg. The coefficient of kinetic friction between the bicycle's tires and the road is 0.61. If the bicycle was to skid to a stop, what would the force of friction be while the bicycle was sliding?
Ff=897 N
Ff=443 N
Ff=546 N
Ff=55.8 N

Answers

The Force of friction on the bicycle of mass 91.4 kg, while moving is 546 N.

What is force?

Force is the product of mass and acceleration.

To calculate the force of friction while the bicycle moves, we use the formula below.

Formula:

F = mgμ..................... Equation 1

Where:

F = Force of frictionm = Massg = Acceleration due to gravityμ = Cofficient of kinetic friction

From the question,

Given:

m = 91.4 kgg = 9.8 m/s²μ = 0.61

Substitute these values into equation 1

F = 91.4×9.8×09.61F = 546.39F ≈ 546 N

Hence, the force of friction on the bicycle is 546 N.

Learn more about force here:

https://brainly.com/question/25239010

#SPJ1

You plan to take a spaceship to the photon sphere
and hover above the black hole to observe the back
of your head. What sort of acceleration will you
experience as you hover at this point? (Answer
qualitatively, e.g., small, comparable to one g, several times g, much bigger than g, incredibly huge.)

Answers

The photon rapidly goes towards the 'singularity' at the center of the black hole, and acceleration will increase tremendously towards center of black hole.

The rate at which an item changes its velocity is known as acceleration, a vector variable. If an object's velocity is changing, it is accelerating. A moving object can occasionally alter its velocity by the same amount every second. a moving object that changes its speed by 10 m/s per second. Since the velocity is changing by a fixed amount every second, this is known as a constant acceleration. It is important to distinguish between an item with a constant acceleration and one with a constant velocity. Be not deceived! An object is accelerating if its velocity is changing, whether by a fixed amount or a variable quantity. Additionally, a moving item with a constant speed is not accelerating.

To know more about  acceleration visit : brainly.com/question/3046924

#SPJ1

Which of the following is NOT a way that machines provide a mechanical advantage? a. change direction c. change power b. change distance d. change force Please select the best answer from the choices provided A B C D

Answers

The following which is not a way that machines provide a mechanical advantage is that it changes power and is denoted as option C.

What is Mechanical advantage?

This is referred to the measure of how much a force is increased by using a tool or machine and is calculated by finding the ratio of the output force to input force.

Changing the power is not a way in which machines provide a mechanical advantage as a result of the parameter not directly involved in how it functions which is therefore the reason why it was chosen as the correct choice.

Read more about Mechanical advantage here https://brainly.com/question/19038908

#SPJ1

Which of the following statements about energy is true?

I. Kinetic energy cannot be transformed into another type of energy.
II. Kinetic energy can be transformed into potential energy.
III. Potential energy can be transformed into kinetic energy.
IV. Potential energy cannot be transformed into another type of energy.

the RIGHT answer is II and III only - kinetic energy can be transformed into potential, potential energy can be transformed into kinetic energy

Answers

The statement that is true about energy is as follows;

Kinetic energy can be transformed into potential energy (option II)Potential energy can be transformed into kinetic energy (option III)

What is kinetic energy?

Kinetic energy is the energy possessed by an object because of its motion, equal (nonrelativistically) to one half the mass of the body times the square of its speed.

Potential energy is the energy possessed by an object because of its position (in a gravitational or electric field), or its condition (as a stretched or compressed spring, as a chemical reactant, or by having rest mass).

The law of conservation of energy is a principle stating that energy may not be created or destroyed but instead can be transformed from one form to another.

This suggests that kinetic energy as a type of energy can be changed into the resting form called potential energy and vice versa.

Learn more about kinetic energy at: https://brainly.com/question/26472013

#SPJ1

If Pete (mass = 90.0 kg) weighs himself and finds that he weighs 150 Newtons, how far away from the center of the earth is he?

Answers

Based on the acceleration due to gravity of the object at that point, the distance from the center of the object is 1.54 * 10⁷ m

What is the distance from the center of the earth for the object?

The distance from the center of the object is calculated using the formula below:

g' = g(r/h)²

where;

g' is the acceleration due to gravity at that point

g is the acceleration due to gravity from the surface of the earth = 9.81 m/s²

r is the radius of the earth = 6.37 * 10⁶ m

h = is the distance away from the center of the earth

The acceleration due to gravity at that point is found using the formula below

F = mg'

g' = F / m

where m is mass

F is force

g' = 150 / 90

g' = 1.67 m/s²

h = r / (√g'/g)

h = 6.37 * 10⁶ / (√1.67/9.81)

h = 1.54 * 10⁷ m

Learn more about acceleration due to gravity at: https://brainly.com/question/88039

#SPJ1

How much work does a 100W motor perform in 5 minutes?

Answers

The amount of work done by the 100 W motor in 5 minutes is 30000 J.

What is workdone?

Work is said to be done when a force moves a body through a certain distance.

To calculate the amount of work done by the motor, we use  the formula below.

Formula:

W = Pt.............. Equation 1

Where:

W = Work done by the motorP = Power of the motort = Time

From the question,

Given:

P = 100 Wt = 5 minutes = (5×60) seconds = 300 seconds

Substitute these values into equation 1

W = 100×300W = 30000 J

Hence, the amount of work done by the motor is 30000 J.

Learn more about work done here: https://brainly.com/question/25573309

#SPJ1

This question is typical on some driver’s license exams: A car moving at 40 km/h skids 14 m with locked brakes. How far will the car skid with locked brakes at 100 km/h? Assume that energy loss is due only to sliding friction

Answers

Answer:

the answer is 0

Explanation:

What is the general result of the proton-proton chain?

Answers

The genral result of the proton-proton chain is the formation of Helium Nucleus i.e., 4 hydrogen combined to form one helium nucleus.

Proton-proton chains are also called p-p chains, proton-proton cycles, or proton-proton reactions.

Roton-Proton Chain.

⁴H ---> He + energy + other

In the proton-proton chain, four hydrogen nuclei (protons) combine to form a helium nucleus. This results in a loss of the original mass. But some energy escapes in the form of neutrinos. First, two hydrogen nuclei (¹H) combine to release a positive electron (e+, positron) and a neutrino (ν) to form a hydrogen 2 nucleus (²H, deuterium).

¹H + ¹H --> ²H + e + ν

The hydrogen 2 nucleus quickly captures another proton to form a helium 3 (³He) nucleus while emitting a gamma (γ) ray.

²H + ¹H --> ³He + γ

From this point, the reaction chain can follow one of several paths, but always leads to a helium-4 nucleus emitting a total of two protons.

³He + He --> ⁴He + ¹H + ¹H

To learn more about Proton-Proton Chain, refer:

https://brainly.com/question/11736501

#SPJ4

Listed following is a set of statements describing individual stars or characteristics of stars. Match these to the appropriate object category.

a. Red Giant or Supergiant Starts.
b. Main-sequence stars
c. White dwarfs

1. Very cool but very luminous
2. Found in the uppper right of the H-R diagram
3. The majority of stars in our galaxy
4. The Sun, for example
5. A very hot and very luminous star
6. not much larger in radius than Earth
7. Very hot but very dim

Answers

The appropriate object category are:

Red giant or super giant → very cool but very luminous→ found in the upper right of the H-R diagram, then

Main sequence stars →The majority of stars in our galaxy→ Sun →for example a very hot and very luminous star, then

White dwarfs → very hot but very d→ not much larger in radius than earth.

Giant:

When  stars run out of their fuel that is hydrogen for the nuclear fusion reactions then they would convert into the Giant stars. main sequence stars.

Main Sequence:

Stars are called main sequence stars when their core temperature reaches up to 10 million kelvin and their start the nuclear fusion reactions of hydrogen into helium in the core of the star.

White dwarfs:

When the stars run out of their fuel then they actually shed the outer layer planetary nebula, the remaining core part that remain behind is called as white dwarf.

To know more about stars, visit here:

https://brainly.com/question/24493066

#SPJ4

A student has a power output of 250 Watts of poweHow much does the student weigh if she travels 15 meters in 30 seconds?

Answers

Answer:

Thank you for helping use

Identify what is happening at each location of the water cycle. location 3

Answers

The water cycle moves from one pond to another i.e. from the river to the ocean, or from the ocean to the atmosphere.

How does location affect the water cycle?

The water cycle is the path that all water accompanies as it moves around Earth in other states. The warm dry air at this distance then increases evaporation, which leaves the land beneath even drier. There are three basic locations of water storage that occur in the erratic water cycle. Water is stored in the atmosphere; water is deposited on the surface of the earth, and water is stored in the ground. There is no start or end to the water cycle, but for classification purposes, we will start at the sun.

So we can conclude that the water cycle relates to water being exchanged through Earth's land, ocean, and atmosphere.

Learn more about the water cycle here: https://brainly.com/question/25796102

#SPJ1

Question 5
Use the following prompt for this question:
A car has a constant velocity of +12 m/s.
Question: Which statement correctly describes the forces acting on the
O the forces are balanced
O the forces are unbalanced
there are no forces acting on the car

Answers

There is no acceleration that is imparted to the car, then the forces are balanced.

What are the forces that act on the car?

We know that unbalanced force is that which cause a body to move or to cause a body to stop moving at a constant rate. If that is so, then a body that acted upon by a system of balanced forces would remain at rest or would continue in a state of uniform motion.

Given the fact that we have been told that this car is moving at a constant speed of about +12 m/s, it is now plain that what acts on the car must be forces that are balanced since the  car is not accelerating.

Learn more about balanced forces:https://brainly.com/question/19054208

#SPJ1

Which statement is NOT true?
O Acceleration is always a positive number.
O Acceleration has the SI units of m/s².
O The slope on a speed-time graph is the object's acceleration.
O
To calculate the acceleration of an object, the change in velocity is divided by the length of the time interval over which
the change occurs.

Answers

Statement 1 is not correct.

The rate at which velocity changes over time, both in terms of speed and direction, is defined as acceleration. A point or object traveling in a straight path is accelerated if it accelerates or decelerates. Even if the speed is constant, the motion of a circle is accelerated because the direction is constantly changing.

Given that

Acceleration is always a positive number.

Acceleration has SI units of m/s².

The slope on a speed-time graph is the object's acceleration.

To calculate the acceleration of an object, the change in velocity is divided by the length of the time interval over which the change occurs.

When a body accelerates, it is positive; when it slows, it is negative. Positive acceleration is directed along the velocity axis. Negative acceleration, on the other hand, is oriented in the opposite direction as the velocity.

The SI unit of acceleration is m/s2. Because acceleration is defined as velocity in meters per second divided by time in seconds, the SI units for acceleration are m/s2, meters per second squared, or meters per second per second, which essentially means how many meters per second the velocity changes every second.

The acceleration of an item is represented by the slope of a speed-time graph. The slope of a speed-time graph displays the rate of change of the body's speed and is known as acceleration.

To compute an object's acceleration, divide the change in velocity by the length of the time interval over which the change occurs. When you accelerate quickly, you apply a lot of force on an object. Depending on the speed and direction, acceleration can be either positive or negative.

A = velocity change/time

A = (vf- v1)/time

Therefore statement 1 is not correct

To learn more about acceleration visit

https://brainly.com/question/2303856

#SPJ1

Convert 13.50 g/cm3 to SI unit

Answers

13.50 g/cm³ value when converted into SI unit is  13500 kg/m³.

SI stands for system international that is standardized to be used for research , various purposes.

1 gram /cm³=1000 kg/m³

so therefore 13.50g/cm³= 13.50 x 10³kg/m³

The reason behind using kg as SI unit of mass is because its defined by taking fixed numerical value of plank's constant.

SI unit of length is metre as it's defined by taking fixed numerical value of speed of light in vacuum. so unit of volume is m³.

To know more about SI unit -

https://brainly.com/question/14507105

#SPJ1

write about a time when you felt warm but someone else felt cold

Answers

Answer: when i took the blanket from my sibling at night

Explanation:

4. A cylindrical gas tank 1 m long, inside diameter of 20 cm, is evacuated and then filled with carbon dioxide gas at 25°C. To what pressure should it be charged if there should be 1.2 kg of carbon dioxide?​

Answers

The pressure of the carbon dioxide is  21.2 kPa.

What is the pressure of the carbon dioxide?

We know that the pressure of the gas is the force with which the gas does hit the walls of the container. In this case, we are told that a cylindrical gas tank 1 m long, inside diameter of 20 cm, is evacuated and then filled with carbon dioxide gas at 25°C.

Thus;

Volume of the cylinder = πd^2/4

Volume = 3.142 * (20 * 10^-2)^2/4

= 0.03142 m^3

From the ideal gas law;

PV = nRT

P = pressure

V = volume

n = Number of moles

R = gas constant

T = temperature

Then;

n = 1.2 * 10^3 g/44 g/mol = 27.3 moles

P = nRT/V

P = 27.3 * 0.082 * 298/0.03142

P = 21.2 kPa

Learn more about pressure:https://brainly.com/question/14983203

#SPJ1

calculate the energy in electron volts of a photon having a wavelength

a) in the microwave range, 5.00cm

b) in the visible light range, 500nm

c) in the x-ray range, 5.00nm

[tex]E=nhf[/tex]

Answers

The energies of the photon in each case are;

a) 2.5 * 10^-5 eV

b) 2.5 eV

c) 2.5 * 10^2 eV

What is the energy of the photon?

We know that a photon is known to have an energy that can be measured or calculated by the use of the formula;

E = hc/λ

E = energy of the photon

h = Plank's constant

λ = Wavelength

c = Speed of light

Then;

a) E = 6.6 * 10^-34 * 3 * 10^8/5 * 10^-2 m

E = 3.96 * 10^-24 J or 2.5 * 10^-5 eV

b) E = 6.6 * 10^-34 * 3 * 10^8/500 * 10^- 9 m

E = 3.96 * 10^-19 J or 2.5 eV

c) E =  6.6 * 10^-34 * 3 * 10^8/5 * 10^- 9 m

E =  3.96 * 10^-17 or 2.5 * 10^2 eV

Learn more about photon:https://brainly.com/question/20912241

#SPJ1

A wheel rotates without friction about a stationary horizontal axis at the center of the wheel. A constant tangential force equal to 73.0 N is applied to the rim of the wheel. The wheel has radius 0.110 m. Starting from rest, the wheel has an angular speed of 14.9 rev/s after 3.41 s. What is the moment of inertia of the wheel?

Answers

Answer:

Approximately [tex]0.293\; {\rm kg \cdot m^{2}}[/tex].

Explanation:

Since the wheel started from rest, initial angular velocity will be [tex]\omega_{0} = 0\; {\rm rad \cdot s^{-1}}[/tex]. It is given that the angular velocity [tex]\omega_{1}[/tex] is [tex]14.9\; {\rm rev \cdot s^{-1}}[/tex] after [tex]t = 3.41\; {\rm s}[/tex]. Apply unit conversion and ensure that all angular velocity are measured in radians-per-second:

[tex]\begin{aligned} \omega_{1} &= 14.9\; {\rm rev \cdot s^{-1}} \times \frac{2\, \pi \; {\rm rad}}{1\; {\rm rev}} \\ &\approx 93.620\; {\rm rad \cdot s^{-1}}\end{aligned}[/tex].

Change in angular velocity:

[tex]\begin{aligned} \Delta \omega = \omega_{1} - \omega_{0} \approx 93.620\; {\rm rad \cdot s^{-1}}\end{aligned}[/tex].

Since the tangential force is constant and there is no friction on the wheel, the angular acceleration [tex]\alpha[/tex] of this wheel will be constant. Since the change in velocity [tex]\Delta \omega \approx 93.620\; {\rm rad \cdot s^{-1}}[/tex] was achieved within [tex]t = 3.41\; {\rm s}[/tex], the average angular acceleration will be:

[tex]\begin{aligned} \alpha &= \frac{\Delta \omega}{t} \\ &\approx \frac{93.620\; {\rm rad \cdot s^{-1}}}{3.41\; {\rm s}} \\ &\approx 27.45\; {\rm rad \cdot s^{-2}}\end{aligned}[/tex].

At a distance of [tex]r = 0.110\; {\rm m}[/tex] from the axis of rotation, the tangential force [tex]F = 73.0\; {\rm N}[/tex] will exert on the wheel a torque [tex]\tau[/tex] of magnitude:

[tex]\begin{aligned} \tau &= F\, r \\ &= (73.0\; {\rm N})\, (0.110\; {\rm m}) \\ &\approx 8.030\; {\rm N \cdot m}\end{aligned}[/tex].

 

Let [tex]I[/tex] denote the moment of inertia of this wheel. The equation [tex]\alpha = (\tau / I)[/tex] relates angular acceleration [tex]\alpha[/tex] to moment of inertia [tex]I\![/tex] and net torque [tex]\tau[/tex]. Rearrange this equation to find the moment of inertia:

[tex]\begin{aligned}I &= \frac{\tau}{\alpha} \\ &\approx \frac{8.030\; {\rm N\cdot m}}{27.45\; {\rm rad \cdot s^{-2}}} \\ &\approx 0.293\; {\rm N \cdot m \cdot s^{2}} \\ &= 0.293 \; {\rm kg \cdot m^{2}}\end{aligned}[/tex].

Note that the unit "radians" is typically ignored. Additionally, [tex]1\; {\rm N} = 1\; {\rm kg \cdot m \cdot s^{-2}}[/tex].

Hence, the moment of inertia of this wheel is approximately [tex]0.293\; {\rm kg \cdot m^{2}}[/tex].

an object travels at a speed of 1 m/s. How far does it travel in 2 seconds?

Answers

Answer: 2m

Explanation:

x = v(t)

x = (1 m/s)(2s)

x = 2m

Calculate how much gravitational potential energy is lost by an aircraft of mass 80,000 kg if it descends from an altitude of 10,000 m to an altitude of 1000 m. What happens to this energy if the pilot keeps the aircraft's speed constant?

Answers

The loss in the gravitataional potential energy is obtained as  7.056 * 10^9 J and this energy is converted to  the kinetic energy of the moving aircraft.

What is the change in the gravitational potential energy?

The term gravitational potential energy has to do with the energy that is possessed by a body by virtue of its position. Thus it has to do with the height of the object. The greater the height, the more the gravitational potential energy.

Now;

E = mgh

m = mass of the object

g = acceleration due to gravity

h = height of the object

Thus;

The loss in the gravitational potential energy is obtained from;

80,000 * 9.8 (10,000 - 1000)

= 7.056 * 10^9 J

Learn more about gravitational potential energy:https://brainly.com/question/19768887

#SPJ1

Earth rotate once every 24 hours. In a reference frame fixed to Earth, how far does
a point on the equator move in 1 hour? RE = 6.34×106 m

Answers

In a reference frame fixed to Earth, a point on the equator moves zero distance in 1 hour.

What is the frame of reference?

A frame of reference in physics is made up of an abstract coordinate system and the collection of physical reference points that fix the coordinate system specifically and regulate measurements inside it.

When we take a reference frame fixed to Earth,  the displacement due to earth's rotation can not be measured. So, any point on earth remains in rest through out the day with respect to the reference frame fixed to Earth. Hence, a point on the equator moves no distance in 1 hour in a reference frame fixed to Earth.

Learn more about reference frame here:

https://brainly.com/question/1217098

#SPJ1

A force of 10.0N acts between two unequal charges when they are separated by 0.30m. what will be the force between the charges when the distance between them is increased by 0.15m​

Answers

Answer:

4.44 N

Explanation:

10 = G m1 m2 / r^2      G    m1   and m2 are constant   so:

10 = k /r^2

10 = k / (.30^2 )

.9 = k              now increase to  .45

F = .9 / (.45^2)    =   4.44 N      

A race car can be slowed with a constant acceleration of (-11 m/s²). If the car initial velocity 22 m/s, how many meters will it travel before it stops ?​

Answers

The distance travelled by the race car that is slowed down with a constant acceleration of - 11 m / s² before it comes to a stop is 22 m

a = ( v - u ) / t

a = Acceleration

v = Final velocity

u = Initial velocity

t = Time

a = - 11 m / s²

v = 0

u = 22 m / s

t = ( v - u ) / a

t = ( 0 - 22 ) / - 11

t = 2 s

s = ut + 1 / 2 at²

s = ( 22 * 2 ) + ( 0.5 * - 11 * 2 * 2 )

s = 44 - 22

s = 22 m

Therefore, the car will travel 22 m before it stops

To know more about acceleration

https://brainly.com/question/12550364

#SPJ9

what is the main consequence of forming jovian planets starting with extra mass from hydrogen compounds?

Answers

The main consequence of forming jovian planets starting with extra mass from hydrogen compounds is that the jovian planets was cold enough for hydrogen compounds to condense into ices. This cause them to grow to large size.

Jovian planets formed in the outer solar system, farther from the sun where ices and rocks were plentiful. The cores accreted rapidly into large clumps of ice and rocks. Jovian planets was cold enough for hydrogen compounds to condense into. Eventually, they become so large, they captured a large amount of hydrogen and other gases from the surrounding nebula with their enormous gravity. The atmosphere of the Jovian planets in our solar system are made mostly of hydrogen and helium compounds and containing hydrogen are--water, ammonia, and methane.

To learn more about Jovian planets, visit---

https://brainly.com/question/13105744

#SPJ4

How would you describe the mass and size the players need to have to play the game?

Answers

Answer:

mass and size are the main important to any playing person for more the two extremely don't Matcha the person doesn't play any exercise

Feeling Generous
Question
What is x?
x+7=99

Answers

Answer: 92

Explanation:

equation : x+7=99

here, we need to get x alone so we subtract 7 from both sides

x +7-7 = 99 -7 on the left side of the equation the 7s cancel out

x=92

Other Questions
A 10.0 g rifle bullet is fired with a speed of 380 m/s into a ballistic pendulum with mass 10.0 kg, suspended from a cord 70.0 cm long. Part A Compute the initial kinetic energy of the bullet. Express your answer in joules. Part B Compute the kinetic energy of the bullet and pendulum immediately after the bullet becomes embedded in the pendulum. Express your answer in joules. Part C Compute the vertical height through which the pendulum rises. Express your answer in centimeters. Consider the following data: x 7 6 5 4 3 P(X=x) 0.2 0.1 0.2 0.2 0.3 Step 1 of 5 : Find the expected value E(X). Round your answer to one decimal place. semantic network model predicts that the time it takes for a person to retrieve information about a concept should be determined by Dimples is a dominant trait (D). The Punnett square shows a cross for this trait between two parents. What is the probability that the offspring will have dimples? 25%50%75%100% Erica worked 14 hour lat week and 20 hour thi week. If he earn $9 per hour how much did he earn during thee two week? the nursing instructor is discussing dietary needs as they relate to age. according to the instructor, adequate intake of what vitamin is especially important in sexually active women of childbearing age to prevent severe birth defects? Which two poetic devices does Poe use in the following line from "The Raven"?"While I nodded, nearly napping, suddenly there came a tapping"Metaphor and SimileImagery and personificationAlliteration and rhymingSimile and rhyming the nurse suspects the client with diabetes may be having a hypoglycemic reaction when what manifestation is assessed? How do you think Chinese Muslims contributed to Asian society? Malik's budget for chocolate chips for the week is $25. How many whole pounds of chocolate chips can he order Which of the following is not a method of culturing viruses? a. in laboratory animals b. in culture media c. in embryonated eggs d. in cell culture e. none of the above There are some different ways to represent pi as an approximate such as 3.14 and 22/7. Describe a situation where you might use 22/7. PLS HELP...I WILL GIVE BRAINLIEST ANSWER FOR THE BEST AND QUICKEST ANSWER!! a definitive estimate should be the least accurate of the three types of estimates.a. trueb. false When performing todays experiment you leave the lid off your setup for the calibration. You remember that you left it off and decide to add it when determining the heat lost by the metal. When performing your calculations, you determine that your heat capacity values are off. Would your values be too high or too low?. In the memoir what does the empty glass most likely symbolize Thomas went to his favorite resturant, Mac Burger Box. He ordered his food and ate it. Then went about his day, alive and well.What is the main energy conversion during digestion? a Electrical Energy to Radiant Energy b Chemical Energy to Chemical Energy c Thermal ( Heat ) Energy to Positive Energy d Chemical Energy to Thermal Energy I actually need this answer as quick as possible. Im doing College Bridge/EdReady Questions..Read the following paragraph from Nevada Moose Herds Growing, an article written by Benjamin Spillman on page 1A in the October 18, 2017 edition of the Reno Gazette-Journal: Given the limited amount of viable moose habitat in Nevada, the driest state in the U.S., its likely the population is small. But the Nevada Department of Wildlife wants to alert the public to keep people from shooting them.Which of the options below most correctly and effectively incorporates this source material? (Either APA or MLA style citations are acceptable.)1: Although the Nevada moose herds growing, that doesnt mean you should shoot them (Spillman 1A).2: Nevada is too dry to support a large moose herd, but their population is growing. (Nevada Department of Wildlife 1A).3: In his article Nevada Moose Herds Growing, Spillman notes that the Nevada Department of Wildlife doesnt want people shooting moose because their population is small (1A).4: Its a sad state of affairs when NDOW announces a rare animal sighting not so we can enjoy them but to keep people from shooting them (Spillman 1A). production with the process describes a manufacturing operation in which the production run is short and machines are shut down frequently or changed in order to produce different products. the kingdom monera has been separated into two domains, the archaea, and the bacteria. which of the following was most important in prompting scientists to change the way these organisms were classified? What is an Ornithologist? (Someone who studies __)