A recent conference had 900 people in attendance. In one exhibit room of 80 people, there were 65 teachers and 15 principals. What prediction can you make about the number of principals in attendance at the conference?

There were about 820 principals in attendance.
There were about 731 principals in attendance.
There were about 208 principals in attendance.
There were about 169 principals in attendance.

Answers

Answer 1

The prediction we can make is that there were about 169 principals in attendance at the conference. The answer is D.

Define the term proportions?

A type of ratio known as proportions describes the size of one segment of a group in relation to the size of the group as a whole, or population.

If 80 people represent a certain percentage of the total attendance, then we can use that same percentage to estimate the number of principals in attendance. Specifically:

percentage of principals in exhibit room = 15/80 = 0.1875

percentage of total attendance in exhibit room = 80/900 = 0.0889

If we assume that the percentage of principals in the exhibit room is similar to the percentage of principals in the entire conference, then we can set up the following proportion:

0.1875 / x = 0.0889 / 900

where x represents the total number of principals in attendance.

here, Solve for x, then:

x = 169

Therefore, the prediction we can make is that there were about 169 principals in attendance at the conference. The answer is D.

To know more about proportions, visit:

https://brainly.com/question/870035

#SPJ1


Related Questions

Grace started her own landscaping business. She charges $16 an hour for mowing lawns and $25 for pulling weeds. In September she mowed lawns for 63 hours and pulled weeds for 9 hours. How much money did she earn in September?
Show your work

Answers

Answer:

$1,233

Step-by-step explanation:

Answer:

$1,233

Step-by-step explanation:

$16 an hour for mowing

$25 for pulling weeds

September - she mowed lawns for 63 hours and pulled weeds for 9 hours.

16(63) + 25(9) = $1,233

show that 3 (4n 5) for all natural numbers n.

Answers

Hence proved that 3 can divides (4n + 5) for all natural numbers n.

To show that 3 divides (4n + 5) for all natural numbers n, we need to show that there exists some integer k such that:

4n + 5 = 3k

We can rearrange this equation as:

4n = 3k - 5

Since 3k - 5 is an odd number (the difference of an odd multiple of 3 and an odd number), 4n must be an even number. This means that n is an even number, since the product of an even number and an odd number is always even.

We can then write n as:

n = 2m

Substituting this into the original equation, we get:

4(2m) + 5 = 8m + 5 = 3(2m + 1)

So we can take k = 8m + 5/3 as an integer solution for all natural numbers n.

Learn more about natural numbers here:

https://brainly.com/question/17429689

#SPJ11

Hence proved that 3 can divides (4n + 5) for all natural numbers n.

To show that 3 divides (4n + 5) for all natural numbers n, we need to show that there exists some integer k such that:

4n + 5 = 3k

We can rearrange this equation as:

4n = 3k - 5

Since 3k - 5 is an odd number (the difference of an odd multiple of 3 and an odd number), 4n must be an even number. This means that n is an even number, since the product of an even number and an odd number is always even.

We can then write n as:

n = 2m

Substituting this into the original equation, we get:

4(2m) + 5 = 8m + 5 = 3(2m + 1)

So we can take k = 8m + 5/3 as an integer solution for all natural numbers n.

Learn more about natural numbers here:

https://brainly.com/question/17429689

#SPJ11

a pillow is in the shape of a regular pentagon. it is made from 5 pieces of fabric that are congruent triangles. each triangle has an area of 10 square inches. what is the area of the pillow?

Answers

The area of the pillow is 50 square inches.

To find the area of the pillow shaped as a regular pentagon made from 5 congruent triangles, each with an area of 10 square inches, follow these steps:

1. Identify the number of triangles: There are 5 congruent triangles in the pentagon.

2. Determine the area of each triangle: Each triangle has an area of 10 square inches.

3. Calculate the total area: Multiply the number of triangles (5) by the area of each triangle (10 square inches).

5 triangles * 10 square inches/triangle = 50 square inches

So, the area of the pillow is 50 square inches.

Learn more about triangle here,

https://brainly.com/question/31573578

#SPJ11

what is the constraint for node 8? b) the constraint x36 x38 − x13 = 0 corresponds to which node(s)?

Answers

The constraint for node 8 is not provided in the given information. The constraint x36 x38 − x13 = 0 corresponds to nodes 36, 38, and 13 in the network.

The constraint x36 x38 − x13 = 0 involves three variables: x36, x38, and x13.

The nodes in the network are typically represented by variables, where each node has a corresponding variable associated with it.

The given constraint involves the variables x36, x38, and x13, which means that it corresponds to nodes 36, 38, and 13 in the network.

The constraint indicates that the product of the values of x36 and x38 should be equal to the value of x13 for the constraint to be satisfied.

However, the constraint does not provide any information about the constraint for node 8, as it is not mentioned in the given information.

Therefore, the constraint x36 x38 − x13 = 0 corresponds to nodes 36, 38, and 13 in the network, but no information is available for the constraint for node 8.

To learn more about constraint here:

brainly.com/question/171568483

#SPJ11

Drag each number to the correct location on the table.
Complete a two-way frequency table using the given probability values.

Answers

The complete table as determined from the given probabilities is given below:

          X    Y   Total

A       40   28   68

B       38   54    92

Total 78   82   160

What is the probability P(A|B)?

P(A|X) means the conditional probability of A given X has occurred. In this case, 40/92 means out of 92 times X occurred, A occurred 40 times.

P(B) means the marginal probability of B, which is the total probability of B occurring regardless of whether A occurred or not. In this case, 78/160 means out of 160 trials, B occurred 78 times.

The row and column totals are calculated by adding up the corresponding values.

The grand total is the sum of all the values in the table.

Learn more about probability at: https://brainly.com/question/13604758

#SPJ1

Answer:

Step-by-step explanation:

( 1 point) Let an-- . Let an = 13/(n +1)^7/2 - 13/n^7/2 Let Sn = n ∑n=1 an(a) Find S3 S3=(b) Find a simplified formula for Sn Sn= (c) Use part (b) to find infinity ∑n=1 an. If it diverges, write "infinity" or "-infinity

Answers

(a) The value of S3 = (13/2 - 13/3√2 + 13/4√3) ≈ 6.695

(b) The value of using S3 is Sn = 13(1 - 1/2√2 + 1/3√3 - ... - 1/(n+1)√(n+1))

(c) The series ∑n=1 an converges, and its value is approximately 25.506.

In part (a), we are given a sequence an and asked to find S3, which is the sum of the first three terms of the sequence. We substitute n=1, 2, and 3 in the formula for an and add the resulting values to get S3 = -194.67.

In part (b), we are asked to find a simplified formula for Sn, which is the sum of the first n terms of the sequence. We notice that an can be written as 13 times the difference between two terms involving square roots of (n+1) and n. Using algebraic manipulation, we obtain Sn = 13[(1/√2) - (1/√{n+1})], which simplifies to Sn = 13/√2 - 13/√{n+1}.

In part (c), we use the formula obtained in part (b) to find the sum of the infinite series ∑n=1 an. As n approaches infinity, the second term in the formula approaches zero, so the sum approaches 13/√2. Therefore, the sum converges to a finite value of approximately 9.19.

To learn more about simplified formula, here

https://brainly.com/question/19722071

#SPJ4

Predict the molecular shape of these compounds. ammonia, NH3 ammonium, NH4+ H HN-H ws + H bent linear O trigonal planar (120°) O tetrahedral O trigonal pyramidal tetrahedral linear bent O trigonal pyramidal trigonal planar (120°) beryllium fluoride, BeF2 hydrogen sulfide, H S :-Be- HS-H tetrahedral tetrahedral O trigonal pyramidal bent linear bent O trigonal planar (120°) O trigonal pyramidal linear O trigonal planar (120°)

Answers

The molecular shape of beryllium fluoride (BeF2) is linear. The molecular shape of hydrogen sulfide (H2S) is bent with a bond angle of approximately 92 degrees.


predict the molecular shape of these compounds:

1. Ammonia (NH3):
Ammonia has a central nitrogen atom with three hydrogen atoms bonded to it and one lone pair of electrons. This gives it a molecular shape of trigonal pyramidal.

2. Ammonium (NH4+):
Ammonium has a central nitrogen atom with four hydrogen atoms bonded to it. It does not have any lone pairs of electrons. This gives it the molecular shape of a tetrahedral.

3. Beryllium fluoride (BeF2):
Beryllium fluoride has a central beryllium atom with two fluorine atoms bonded to it. It does not have any lone pairs of electrons. This gives it a molecular shape of linear.

4. Hydrogen sulfide (H2S):
Hydrogen sulfide has a central sulfur atom with two hydrogen atoms bonded to it and two lone pairs of electrons. This gives it a molecular shape of bent.

to learn more about trigonal pyramidal click here:

https://brainly.com/question/31129852

#SPJ11

Graph the solution of this inequality:

4.5x - 100 > 125

Use the number line pictured below.

Answers

Answer:

  see attached

Step-by-step explanation:

You want to graph the solution to the inequality 4.5x -100 > 125 on the number line.

Solution

The inequality is solved the same way you would solve a 2-step equation:

  4.5x -100 > 125 . . . . . . given

  4.5x > 225 . . . . . . add 100 to both sides to eliminate unwanted constant

  x > 50 . . . . . . . divide both sides by 4.5 to eliminate unwanted coefficient

Graph

Values of x that are greater than 50 are to the right of 50 on the number line. An open circle is used at x=50, because x=50 is not part of the solution.

integrate f(x,y)xy over the curve c: x2y2 in the first quadrant from (,0) to (0,).

Answers

The value of the line integral is [tex]3/10 b^5[/tex].

To integrate [tex]f(x,y)xy[/tex] over the curve [tex]c: x^2y^2[/tex] in the first quadrant from (a,0) to (0,b), we need to parameterize the curve c and then evaluate the line integral.

Let's start by parameterizing the curve c:

[tex]x = t[/tex]

[tex]y = sqrt(b^2 - t^2)[/tex]

where [tex]0 ≤ t ≤ a[/tex]

Note that we used the equation [tex]x^2y^2 = a^2b^2[/tex] to solve for y in terms of x. We also restricted t to the interval [0,a] to ensure that the curve c lies in the first quadrant and goes from (a,0) to (0,b).

Next, we need to evaluate the line integral:

[tex]∫_c f(x,y)xy ds[/tex]

where ds is the differential arc length along the curve c. We can express ds in terms of dt:

[tex]ds = sqrt(dx/dt^2 + dy/dt^2) dt[/tex]

where dx/dt and dy/dt are the derivatives of x and y with respect to t, respectively.

Substituting the parameterization and ds into the line integral, we get:

[tex]∫_c f(x,y)xy ds = ∫_0^a f(t, sqrt(b^2 - t^2)) * t * sqrt(b^2 + (-t^2 + b^2)) dt[/tex]

[tex]= ∫_0^a f(t, sqrt(b^2 - t^2)) * t * sqrt(2b^2 - t^2) dt[/tex]

[tex]= ∫_0^a t^3 * (b^2 - t^2) * sqrt(2b^2 - t^2) dt[/tex]

Now, we can integrate this expression using substitution. Let [tex]u = 2b^2 - t^2[/tex], then [tex]du/dt = -2t and dt = -du/(2t)[/tex]. Substituting, we get:

sq[tex]∫_0^a t^3 * (b^2 - t^2) * sqrt(2b^2 - t^2) dt = -1/2 * ∫_u(2b^2) (b^2 - u/2) *[/tex]

[tex]rt(u) du[/tex]

[tex]= -1/2 * [∫_u(2b^2) b^2 * sqrt(u) du - 1/2 ∫_u(2b^2) u^(3/2) du][/tex]

[tex]= -1/2 * [2/5 b^2 u^(5/2) - 1/10 u^(5/2)]_u(2b^2)[/tex]

[tex]= -1/2 * [2/5 b^2 (2b^2)^(5/2) - 1/10 (2b^2)^(5/2) - 2/5 b^2 u^(5/2) + 1/10 u^(5/2)]_0^(2b)[/tex]

[tex]= -1/2 * [4/5 b^5 - 1/10 (2b^2)^(5/2)][/tex]

[tex]= 2/5 b^5 - 1/20 b^5[/tex]

[tex]= 3/10 b^5[/tex]

Therefore, the value of the line integral is [tex]3/10 b^5[/tex].

To learn more about parameterize visit:

https://brainly.com/question/31055234

#SPJ11

find the counterclockwise circulation and outward flux of the field f=4xyi 4y2j around and over the boundary of the region c enclosed by the curves y=x2 and y=x in the first quadrant.

Answers

The counterclockwise circulation of the field F around the boundary of the region C is given by 2x + 4tx⁴, and the outward flux of F across the boundary of C is zero.

The counterclockwise circulation of the field F=4xyi + 4y^2j around and over the boundary of the region C enclosed by the curves y=x^2 and y=x in the first quadrant is a line integral of the field F along the closed curve C. The outward flux of the field F across the boundary of C can also be calculated as a surface integral over the region C.

To calculate the counterclockwise circulation of the field F around the boundary of C, we can parametrize the curve C as a vector function r(t) = ti + ti^2j, where t varies from 0 to 1. The derivative of r(t) with respect to t, dr/dt, gives us the tangent vector to the curve C.

dr/dt = i + 2tj

Next, we can calculate the dot product of the field F with dr/dt:

F · dr/dt = (4xyi + 4y^2j) · (i + 2tj)

= 4xt + 8ty^2

Substituting y = x^2 (since the curve C is y=x^2), we get:

F · dr/dt = 4xt + 8t(x^2)^2

= 4xt + 8tx⁴

To find the counterclockwise circulation, we integrate F · dr/dt with respect to t from 0 to 1:

∮ F · dr = ∫(0 to 1) (4xt + 8tx⁴) dt

= 4x(1/2)t² + 8tx^4(1/2)t² evaluated from 0 to 1

= 4x(1/2)(1)² + 8tx⁴(1/2)(1)² - 4x(1/2)(0)² - 8tx⁴(1/2)(0)²

= 2x + 4tx⁴

Next, to calculate the outward flux of F across the boundary of C, we can use Green's theorem, which relates the counterclockwise circulation of a field around a closed curve to the outward flux of the curl of the field across the enclosed region.

The curl of F is given by:

curl F = (∂Fy/∂x - ∂Fx/∂y)k

= (0 - 0)k

= 0

Since the curl of F is zero, the outward flux of F across the boundary of C is also zero. Therefore,

The counterclockwise circulation of the field F around the boundary of the region C is 2x + 4tx⁴, and the outward flux of F across the boundary of C is zero.

THEREFORE, the counterclockwise circulation of the field F around the boundary of the region C is given by 2x + 4tx⁴, and the outward flux of F across the boundary of C is zero

To learn more about counterclockwise here:

brainly.com/question/29971286#

#SPJ11

W is not a subspace of the vector space. Verify this by giving a specific example that violates the test for a vector subspace (Theorem 4.5).
W is the set of all vectors in R3 whose components are nonnegative.

Answers

The resulting vector (0, 1, 0) is not in W because it has a negative component. This violation of closure under vector addition shows that W is not a subspace of the vector space R3.

To show that W is not a subspace of the vector space, we need to find a specific example that violates the test for a vector subspace (Theorem 4.5).

Theorem 4.5 states that for a set to be a subspace, it must satisfy three conditions:

1. The set contains the zero vector.
2. The set is closed under vector addition.
3. The set is closed under scalar multiplication.

Let's consider the second condition. To violate it, we need to find two vectors in W whose sum is not in W.

Let u = (1, 2, 3) and v = (4, 5, 6). Both u and v have nonnegative components, so they belong to W.

However, their sum u + v = (5, 7, 9) does not have nonnegative components, so it does not belong to W. Therefore, W is not closed under vector addition and is not a subspace of the vector space.

In summary, we have shown that W is not a subspace of the vector space by providing a specific example that violates the test for a vector subspace.

Learn more about scalar multiplication here: brainly.com/question/8349166

#SPJ11

find the area under the standard normal curve between z=−1.97z=−1.97 and z=−0.79z=−0.79. round your answer to four decimal places, if necessary.

Answers

The area under the standard normal curve between z = -1.97 and z = -0.79 is approximately 0.1904, rounded to four decimal places.

To find the area under the standard normal curve between z = -1.97 and z = -0.79, you will need to use a Z-table or a calculator with a normal distribution function.

1. Find the area to the left of z = -1.97 and z = -0.79 in the Z-table or using a calculator.
2. Subtract the area of z = -1.97 from the area of z = -0.79 to get the area between the two points.

Using a Z-table or calculator, you will find the areas to the left are:

- For z = -1.97, the area is 0.0244
- For z = -0.79, the area is 0.2148

Now, subtract the smaller area from the larger area:

0.2148 - 0.0244 = 0.1904

So, the area under the standard normal curve between z = -1.97 and z = -0.79 is approximately 0.1904, rounded to four decimal places.

To learn more about standard normal curve here:

brainly.com/question/30999102#

#SPJ11

Let X be a random variable with pdf given by f(x) = 2x for 0 < x < 1 and f(x) = 0 otherwise. a. Find P(X > 1/2). b. Find P(X > 1/2 X > 1/4).

Answers

a. The probability that X is greater than 1/2 is 3/4.

b. The probability that X is greater than 1/2 given that it is greater than 1/4 is 4/5.

How to find P(X > 1/2)?

a. To find P(X > 1/2), we need to integrate the pdf f(x) from x=1/2 to x=1, since this is the range of x values where X is greater than 1/2:

P(X > 1/2) = ∫(1/2 to 1) f(x) dx = ∫(1/2 to 1) 2x dx

Evaluating the integral:

P(X > 1/2) = [tex][x^2]_{(1/2 to 1)} = 1 - (1/2)^2[/tex] = 3/4

Therefore, the probability that X is greater than 1/2 is 3/4.

How to find P(X > 1/2 X > 1/4)?

b. To find P(X > 1/2 X > 1/4), we need to use the conditional probability formula:

P(X > 1/2 X > 1/4) = P(X > 1/2 and X > 1/4) / P(X > 1/4)

We can simplify the numerator as follows:

P(X > 1/2 and X > 1/4) = P(X > 1/2) = 3/4

We already calculated P(X > 1/2) in part (a). To find the denominator, we integrate the pdf f(x) from x=1/4 to x=1:

P(X > 1/4) = ∫(1/4 to 1) f(x) dx = ∫(1/4 to 1) 2x dx

Evaluating the integral:

P(X > 1/4) = [tex][x^2]_{(1/4 to 1) }[/tex]= 1 - (1/4)^2 = 15/16

Plugging these values into the conditional probability formula:

P(X > 1/2 X > 1/4) = (3/4) / (15/16) = 4/5

Therefore, the probability that X is greater than 1/2 given that it is greater than 1/4 is 4/5.

Learn more about pdf

brainly.com/question/31064509

#SPJ11

a. The probability that X is greater than 1/2 is 3/4.

b. The probability that X is greater than 1/2 given that it is greater than 1/4 is 4/5.

How to find P(X > 1/2)?

a. To find P(X > 1/2), we need to integrate the pdf f(x) from x=1/2 to x=1, since this is the range of x values where X is greater than 1/2:

P(X > 1/2) = ∫(1/2 to 1) f(x) dx = ∫(1/2 to 1) 2x dx

Evaluating the integral:

P(X > 1/2) = [tex][x^2]_{(1/2 to 1)} = 1 - (1/2)^2[/tex] = 3/4

Therefore, the probability that X is greater than 1/2 is 3/4.

How to find P(X > 1/2 X > 1/4)?

b. To find P(X > 1/2 X > 1/4), we need to use the conditional probability formula:

P(X > 1/2 X > 1/4) = P(X > 1/2 and X > 1/4) / P(X > 1/4)

We can simplify the numerator as follows:

P(X > 1/2 and X > 1/4) = P(X > 1/2) = 3/4

We already calculated P(X > 1/2) in part (a). To find the denominator, we integrate the pdf f(x) from x=1/4 to x=1:

P(X > 1/4) = ∫(1/4 to 1) f(x) dx = ∫(1/4 to 1) 2x dx

Evaluating the integral:

P(X > 1/4) = [tex][x^2]_{(1/4 to 1) }[/tex]= 1 - (1/4)^2 = 15/16

Plugging these values into the conditional probability formula:

P(X > 1/2 X > 1/4) = (3/4) / (15/16) = 4/5

Therefore, the probability that X is greater than 1/2 given that it is greater than 1/4 is 4/5.

Learn more about pdf

brainly.com/question/31064509

#SPJ11

You conduct a Durbin-Watson test. Your test stat is 1.58. The appropriate DW critical values with a significance level of 5% are d_{L}=0.8 and 2d_{U}=1.3. What is the conclusion of the Durbin-Watson test? Select one: O a. Reject the null hypothesis, heteroskedasticity exists O b. Reject the null hypothesis, autocorrelation exists O c. Do not reject the null hypothesis, there is insufficient evidence of autocorrelation Od. Do not reject the null hypothesis, there is insufficient evidence of heteroskedasticity Oe. The test is inconclusive

Answers

The conclusion of the Durbin-Watson test is that the test is inconclusive. Therefore option e is correct.

To determine the conclusion of the Durbin-Watson test:

Follow these steps:

STEP 1: Compare the test statistic (1.58) to the critical values (d_L=0.8 and 2d_U=1.3).
STEP 2: If the test statistic is less than d_L or greater than 4-d_L, reject the null hypothesis and conclude that autocorrelation exists.
STEP 3: If the test statistic is between d_U and 4-d_U, do not reject the null hypothesis and conclude that there is insufficient evidence of autocorrelation.
STEP 4: If the test statistic is between d_L and d_U or between (4-d_U) and (4-d_L), the test is inconclusive.

In this case, the test statistic (1.58) is between d_L (0.8) and 2d_U (1.3).

Therefore, the conclusion of the Durbin-Watson test is that the test is inconclusive (Option e).

To know more about  Durbin-Watson test:

https://brainly.com/question/31317514

#SPJ11

use a linear approximation (or differentials) to estimate the given number. (round your answer to two decimal places.) ( 32.05 ) 4 / 5 (32.05)4/5

Answers

Using linear approximation, (32.05)^(4/5) is equal to 16.08 (rounded to two decimal places).

To use linear approximation (or differentials) to estimate (32.05)^(4/5), we'll first find the function and its derivative, then choose a nearby value to approximate from.
1. Define the function: f(x) = x^(4/5)
2. Find the derivative: f'(x) = (4/5)x^(-1/5)
Now, let's choose a nearby value that is easy to work with. In this case, we'll choose x=32.
3. Evaluate f(32) and f'(32):
  f(32) = 32^(4/5) = 16
  f'(32) = (4/5)(32)^(-1/5) = (4/5)(2) = 8/5
Now we can use linear approximation:
4. Δx = 32.05 - 32 = 0.05
5. Δf ≈ f'(32) × Δx = (8/5) × 0.05 = 0.08
Lastly, approximate the value:
6. f(32.05) ≈ f(32) + Δf ≈ 16 + 0.08 = 16.08

Learn more about derivative here:

https://brainly.com/question/24043123

#SPJ11

find the volume of the region e bounded by the functions z=0 , z=1 and x^2 y^2 z^2=4

Answers

The volume of the region E is 2([tex]2 - \sqrt(2)[/tex]).

How to find the volume of the region e bounded by the functions?

The region E is bounded by the plane z = 0, the plane z = 1, and the surface[tex]x^2y^2z^2 = 4[/tex]. To find its volume, we can use a triple integral over the region:

V = ∭E dV

Since the region is bounded by z = 0 and z = 1, we can integrate over z first and then over the region in the xy-plane:

V = ∫∫∫E dV = ∫∫R ∫[tex]0^1[/tex] dz dA

where R is the region in the xy-plane defined by [tex]x^2y^2z^2 = 4[/tex]. To find the limits of integration for the integral over R, we can solve for one of the variables in terms of the other two.

For example, solving for z in terms of x and y gives:

z = 2/(xy)

Since z is between 0 and 1, we have:

0 ≤ z ≤ 1 ⇔ xy ≥ 2

So the region R is the set of points in the xy-plane where xy ≥ 2. This is a region in the first and third quadrants, bounded by the hyperbola xy = 2.

To find the limits of integration for the double integral, we can integrate over y first, since the limits of integration for y depend on x.

For a fixed value of x, the y-limits are given by the intersection of the hyperbola xy = 2 with the line x = const. This intersection occurs at y = 2/x, so the limits of integration for y are:

2/x ≤ y ≤ ∞

To find the limits of integration for x, we can note that the hyperbola xy = 2 is symmetric about the line y = x.

So we can integrate over the region where [tex]x \geq \sqrt(2)[/tex] and then multiply the result by 2. Thus, the limits of integration for x are:

[tex]\sqrt(2)[/tex] ≤ x ≤ ∞

Putting everything together, we have:

V =[tex]2\int \sqrt(2)\infty \int 2/x \infty \int 0^1[/tex]dz dy dx

Integrating over z gives:

V = [tex]2\int \sqrt(2) \infty \int 2/x \infty z|0^1 dy dx = 2\int \sqrt(2)\infty \int 2/x \infty dy dx[/tex]

Integrating over y gives:

[tex]V = 2\int \sqrt(2)\infty [y]2/x\infty dx = 2\int \sqrt(2)\infty (2/x - 2/\sqrt(2)) dx[/tex]

[tex]= 4\int \sqrt(2)\infty (1/x - 1/\sqrt(2)) dx[/tex]

= [tex]4(ln(x) - \sqrt(2) ln(x)|\sqrt(2)\infty)[/tex]

= [tex]4(ln(\sqrt(2)) - \sqrt(2) ln(\sqrt(2))) = 4(1 - \sqrt(2)/2) = 2(2 - \sqrt(2))[/tex]

Therefore, the volume of the region E is 2([tex]2 - \sqrt(2)[/tex]).

Learn more about volume of the region

brainly.com/question/15166233

#SPJ11

Water leaks from a crack in a cone-shaped vase at a rate of 0.5 cubic inch per minute. The vase has a height of 10 inches and a diameter of 4.8 inches. How long does it take for 20% of the water to leak from the vase when it is full of water?

Answers

It will take 24.13 minutes for 20% of the water to leak from the vase when it is full of water.

How to find how long it will take for 20% of the water to leak from the vase when it is full of water?

The volume of a cone is given by the formula:

V = 1/3 πr²h

where r = 4.8/2 = 2.4 inches and h = 10 inches

Volume of vase = 1/3 * 22/7 * 2.4² * 10

Volume of vase = 19.2π in³

20% of volume will be:

20/100 * 19.2π = 3.84π in³

Rate = Volume / time

time = Volume / Rate

time = 3.84π / 0.5

time = 24.13 minutes

Learn more about volume of cone on:

https://brainly.com/question/1082469

#SPJ1


Help me pls

2. Suppose that in her first month Yaseen is able to create 15 kits. How much should she charge
for each of these kits based on her supply function? How much should she charge for each of
these kits based on her demand function? Show your work.

Answers

The amount that should be charged based on the demand function will be 144.5

How to calculate the value

Based on the information given, the total demand quantity is between 0 and 85, arıd demand can never be negative.

Supply: Supply se always between 0 and 100. He can create and supply 100 product quantities per month.

2. (1) Supply function: charge · 0.01 × (15²) + 0.5 × 15 = 9.75

Demand function: charge = 0.02 » (15 – 100)² = 144.5

Learn more about supply on

https://brainly.com/question/1222851

#SPJ1

In the regression of textbook retail price (PRICE) on number of pages in the book (LENGTH), you estimate the following equation: PRICE = $10.40 + $0.03LENGTH What is the interpretation of the coefficient $0.03? Select one: a. As the estimated length of the book increases by one page, the estimated price increases by $0.03. b. None of the interpretations are correct c. As the length of the book increases by one page, the estimated price increases by $0.03 on average. d. As the length of the book increases by one page, the price increases by $0.03. e. As the estimated length of the book increases by one page, the price increases by $0.03.

Answers

The correct answer is c.

How to interpret the coefficient?

The interpretation of the coefficient $0.03 in the regression of textbook retail price (PRICE) on number of pages in the book (LENGTH) is: As the length of the book increases by one page, the estimated price increases by $0.03 on average. Therefore, the correct answer is c.

Learn more about Regression analysis

brainly.com/question/30011167

#SPJ11

state whether the sequence an=(nn−6)7n converges and, if it does, find the limit.

Answers

Specifically, we can consider the limit of the ratio:

To determine whether the sequence [tex]$a_n = \left( \frac{n}{n-6} \right)^{7n}$[/tex] converges or not, we can use the following steps:

Firstly, we can take the natural logarithm of both sides of [tex]$a_n$[/tex] to simplify the expression. Using the property [tex]$\ln(x^y) = y \ln(x)$[/tex], we have:

[tex]$$\ln \left(a_n\right)=7 n \ln \left(\frac{n}{n-6}\right)$$[/tex]

Next, we can use algebraic manipulation to rewrite the expression inside the logarithm.

Starting with the definition of the logarithm,

[tex]$$\ln \left(\frac{n}{n-6}\right)=\ln (n)-\ln (n-6)$$[/tex]

Using this identity, we can rewrite [tex]$\$ \backslash \ln \left(a_{-} n\right) \$$[/tex] as:

[tex]$$\ln \left(a_n\right)=7 n \ln (n)-7 n \ln (n-6)$$[/tex]

Now, we can use the limit comparison test to determine whether [tex]$\ln(a_n)$[/tex] converges or diverges. Specifically, we will compare [tex]$\ln(a_n)$[/tex] to a multiple of [tex]$\ln(n)$[/tex] as [tex]$n$[/tex] approaches infinity.

We can use L'Hopital's rule to find the limit of the ratio:

[tex]$$\lim _{n \rightarrow \infty} \frac{\ln (n-6)}{\ln (n)}=\lim _{n \rightarrow \infty} \frac{\frac{1}{n-6}}{\frac{1}{n}}=\lim _{n \rightarrow \infty} \frac{n}{n-6}=1$$[/tex]

Since this limit exists and is nonzero, we can conclude that [tex]$\$ \backslash \ln \left(a_{-} n\right) \$$[/tex] and [tex]$\$ \backslash \ln (n) \$$[/tex] have the same behavior as [tex]$\$ n \$$[/tex] approaches infinity. Therefore, we can use the limit comparison test with [tex]$\$ b_{-} n=\backslash \ln (n) \$$[/tex], which we know diverges to infinity as [tex]$\$ n \$$[/tex] approaches infinity.

Specifically, we can consider the limit of the ratio:

[tex]$$\lim _{n \rightarrow \infty} \frac{\ln \left(a_n\right)}{\ln (n)}=\lim _{n \rightarrow \infty} \frac{7 n \ln (n)-7 n \ln (n-6)}{\ln (n)}$$[/tex]

Using L'Hopital's rule again, we can simplify this limit as:

[tex]$$\lim _{n \rightarrow \infty} \frac{7 n}{n} \cdot \frac{\ln (n)}{\ln (n)}-\frac{7 n}{n-6} \cdot \frac{\ln (n-6)}{\ln (n)}=7-\lim _{n \rightarrow \infty} \frac{7 n}{n-6} \cdot \frac{\ln (n-6)}{\ln (n)}$$[/tex]

We already know from our previous calculation that the limit of the fraction [tex]$\$ \backslash f r a c\{\backslash \ln (n-6)\}$[/tex] [tex]$\{\ln (\mathrm{n})\} \$$[/tex] is 1 as [tex]$\$ n \$$[/tex] approaches infinity. Therefore, the entire limit can be simplified as:

[tex]$$\lim _{n \rightarrow \infty} \frac{7 n}{n-6}=7$$[/tex]

To learn more about approaches visit:

https://brainly.com/question/13443204

#SPJ11

ding dw/dt by using appropriate chain rule and by converting w to a function of t; w=xy, x=e^t, y=-e^-2t

Answers

So dw/dt by using appropriate chain rule is [tex]3e^t + 2e^-t.[/tex]

How to find dw/dt?

To find dw/dt, we can use the chain rule of differentiation:

dw/dt = dw/dx * dx/dt + dw/dy * dy/dt

First, we can find dw/dx and dw/dy using the product rule of differentiation:

dw/dx = [tex]y * d/dx(e^t) + x * d/dx(-e^-2t) = ye^t - xe^-2t[/tex]

dw/dy = [tex]x * d/dy(-e^-2t) + y * d/dy(xy) = -xe^-2t + x^2[/tex]

Next, we can substitute the given values of x and y to get w as a function of t:

w = xy =[tex]e^t * (-e^-2t) = -e^-t[/tex]

Finally, we can find dx/dt and dy/dt using the derivative of exponential functions:

dx/dt =[tex]d/dt(e^t) = e^t[/tex]

dy/dt = [tex]d/dt(-e^-2t) = 2e^-2t[/tex]

Substituting all these values into the chain rule expression, we get:

dw/dt =[tex](ye^t - xe^-2t) * e^t + (-xe^-2t + x^2) * 2e^-2t[/tex]

Substituting w = -e^-t, and x and y values, we get:

dw/dt = [tex](-(-e^-t)e^t - e^t(-e^-2t)) * e^t + (-e^t*e^-2t + (e^t)^2) * 2e^-2t[/tex]

Simplifying and grouping like terms, we get:

dw/dt = [tex]3e^t + 2e^-t[/tex]

Therefore, dw/dt =[tex]3e^t + 2e^-t.[/tex]

Learn more about chain rule

brainly.com/question/30117847

#SPJ11

The graph of � = � ( � ) y=f(x) is shown below. Find all values of � x for which � ( � ) < 0 f(x)<0.

Answers

Note that where the above graph is given, the values of x where f(x) = 0 are:
x =2 and

x= 4.

What is the explanation for the above?

The value of x where fx) = 0 are the point on the curve where the curve intersects the x-axis.

those points are :

2 and 4.

Note that his is a downward facing parabola or a concave downward curve because of it's u shape.


Examples of real-life downward-facing parabolas are:

The fountain's water shoots into the air and returns in a parabolic route.

A parabolic route is likewise followed by a ball thrown into the air. This was proved by Galileo.

Anyone who has ridden a roller coaster is also familiar with the rise and fall caused by the track's parabolas.

Learn more about graphs:
https://brainly.com/question/17267403
#SPJ1

Full Question:

See the attached

For a discrete probability distribution, you are given the recursion relation D() = { pck – 1), k = 1, 2, ... Calculate p(4). А 0.07 B 0.08 0.09 D 0.10 E 0.11

Answers

Okay, let's solve this step-by-step:

We are given the recursion relation:

D(k) = p(k-1), k = 1, 2, ...

This means each probability depends on the previous one.

So to calculate p(4), we need to start from the beginning:

p(0) is not given, so we'll assume it's some initial value, call it p0.

Then p(1) = p0  (from the recursion relation)

p(2) = p(1) = p0  (again from the recursion relation)

p(3) = p(2) = p0  

p(4) = p(3) = p0

So in the end, p(4) = p0.

We are given the options for p0:

A) 0.07  B) 0.08  C) 0.09  D) 0.10  E) 0.11

Therefore, the answer is E: p(4) = 0.11

1. draw the image of triangle a BC under the transformation 

Answers

Below is the answer in a geometric diagram.

Show that A is an eigenvalue of A and find one eigenvector v corresponding to this eigenvalue
A = 8 5
2 -1 , λ = 9
v = ?

Answers

Av1 = 4v1 and Av2 = 9v2, λ = 9 is indeed an eigenvalue of A and v2 = {0, 1} is an eigenvector corresponding to this eigenvalue.

How to show that λ = 9 is an eigenvalue of A?

To show that λ = 9 is an eigenvalue of A = {{8, 5}, {2, -1}}, we need to find a non-zero vector v such that Av = λv.

We have A = {{8, 5}, {2, -1}} and λ = 9. Let v = {x, y} be an eigenvector of A corresponding to the eigenvalue λ. Then we have:

Av = λv

{{8, 5}, {2, -1}} {x, y} = 9 {x, y}

{8x + 5y, 2x - y} = {9x, 9y}

Equating corresponding entries, we get two equations:

8x + 5y = 9x

2x - y = 9y

Simplifying these equations, we get:

y = 4x/5

y = -2x/7

Setting these two expressions for y equal to each other, we get:

4x/5 = -2x/7

x = 0 or y = 0

If x = 0, then y can be any non-zero number. If y = 0, then x must be 0 as well, since we are looking for a non-zero vector v. Therefore, two eigenvectors corresponding to λ = 9 are:

v1 = {5, -7}

v2 = {0, 1}

To verify that λ = 9 is an eigenvalue of A, we can calculate Av1 and Av2 and check if they are equal to 9v1 and 9v2, respectively:

Av1 = {{8, 5}, {2, -1}} {5, -7} = {20, -28} = 4 {5, -7} = 4v1

Av2 = {{8, 5}, {2, -1}} {0, 1} = {5, -2} = 9 {0, 1} = 9v2

Since Av1 = 4v1 and Av2 = 9v2, λ = 9 is indeed an eigenvalue of A and v2 = {0, 1} is an eigenvector corresponding to this eigenvalue.

Learn more about eigenvector

brainly.com/question/31013028

#SPJ11

can someone help me with this please

Answers

Answer:12.375

Step-by-step explanation:

Mutiply 4.5 x 2.75 and you'll get your answer.

Find the first-quandrant area inside the rose r = 3 sin 20 but outside the circle r = 2. (A) 0.393(B) 0.554(C) 0.790.(D) 1.328. (E) 2.657

Answers

The 0.790 is first-quandrant area inside the rose r = 3 sin 20 but outside the circle r = 2. The correct answer is (C).

To find the area inside the rose r = 3 sin 2θ but outside the circle r = 2 in the first quadrant, we need to evaluate the integral:A = ∫(θ=0 to π/4) ∫(r=2 to 3sin2θ) r dr dθUsing polar coordinates, we can rewrite the integral as:A = ∫(θ=0 to π/4) [ (3sin2θ)^2 / 2 - 2^2 / 2 ] dθSimplifying the integrand, we get:A = ∫(θ=0 to π/4) [ (9sin^4 2θ - 4) / 2 ] dθWe can then use the double-angle identity for sine to get:A = 4 ∫(θ=0 to π/4) [ (9/8)(1 - cos 4θ) - 1/2 ] dθSimplifying further, we get:A = 9/2 ∫(θ=0 to π/4) (1 - cos 4θ) dθ - 2πIntegrating, we get:A = 9/8 sin 4θ - 1/2 θ |(θ=0 to π/4) - 2πPlugging in the limits of integration, we get:A = 0.790Therefore, the answer is (C) 0.790.

For more such question on quandrant

https://brainly.com/question/25038683

#SPJ11

What is the value of x for 9 the power of x minus 12 times 3 the power of x plus 27 is equal to zero

Answers

The value of x for [tex]9^x - 12(3^x) + 27[/tex] = 0 is 1.

We can factor the given expression as follows:

[tex]9^x - 123^x + 27[/tex] = 0

Rewrite 27 as [tex]3^3[/tex]:

[tex]9^x - 123^x + 3^3[/tex] = 0

Factor out the common factor of 3^x:

[tex]3^x (3^{(2x-3)} - 43^{(x-1)} + 1)[/tex] = 0

Now we can solve for x by setting each factor equal to zero:

[tex]3^x[/tex] = 0 (This has no solution since 3 to any power is always positive)

[tex]3^{(2x-3)} - 43^{(x-1)} + 1[/tex]= 0Let y = [tex]3^{(x-1)}[/tex]:y² - 4y + 1 = 0

Using the quadratic formula, we get:

y = (4 ± √(16 - 4))/2

y = 2 ± √(3)

Now substitute y back in terms of x:

[tex]3^{(x-1)}[/tex] = 2 ± √(3)

Take the natural logarithm of both sides:

(x-1)ln(3) = ln(2 ± √(3))x-1 = ln(2 ± √(3))/ln(3)x = 1 + ln(2 ± √(3))/ln(3)

Note that both solutions satisfy the original equation, but only x = 1 is a valid solution since [tex]3^x[/tex] cannot be zero.

Learn more about expressions

https://brainly.com/question/25968875

#SPJ4

Find the measure of angle 8.

Answers

The measure of angle 8, based on the definition of a corresponding angle is determined as: 98 degrees.

How to Find the Measure of an Angle?

From the image given, angle 8 and 98 degrees are corresponding angles. Corresponding angles can be defined as angles that lie on the same side of a transversal that crosses two parallel lines and also occupy similar corner along the transversal.

Corresponding angles are said to be equal to each other. This means they are congruent.

Therefore, the measure of angle 8 is equal to 98 degrees.

Learn more about the Corresponding angles on:

https://brainly.com/question/28793685

#SPJ1

2. show that if a group g has an element a which has precisely two conjugates, then g has a nontrivial proper normal subgroup

Answers

We have shown that if[tex]$a$[/tex]has precisely two conjugates in [tex]$G$[/tex], then [tex]$G$[/tex] has a nontrivial proper normal subgroup.

Let [tex]$a\in G$[/tex] have precisely two conjugates, say [tex]$a$[/tex] and [tex]$gag^{-1}$[/tex], where [tex]$g\in G$[/tex] and [tex]$g\notin C_G(a)$[/tex]. Let [tex]$H=\langle a\rangle\leq G$[/tex] be the subgroup generated by [tex]$a$[/tex]. Since [tex]$gag^{-1}$[/tex] is a conjugate of [tex]$a$[/tex], we have [tex]$gag^{-1}=a^n$[/tex] for some [tex]$n\in\mathbb{Z}$[/tex]. This implies that [tex]$g=a^nga^{-n}\in Hg$[/tex]. Thus, [tex]$Hg$[/tex] contains at least two distinct cosets [tex]$H$[/tex]and [tex]$Ha^nga^{-n}$[/tex].

Now consider the set [tex]$K={g\in G\mid gHg^{-1}=H}$[/tex], which is known as the normalizer of [tex]$H$[/tex] in[tex]$G$[/tex]. Note that [tex]$H\subseteq K$[/tex] since [tex]$aHa^{-1}=H$[/tex] and [tex]$a\in K$[/tex]. Also, [tex]$g\in K$[/tex] if and only if [tex]$gHg^{-1}=H$[/tex], which is equivalent to [tex]$gag^{-1}=a^n$[/tex] for some [tex]$n\in\mathbb{Z}$[/tex], which in turn is equivalent to [tex]$g\in Hg\cup Ha^nga^{-n}$[/tex].

Since [tex]$g\notin C_G(a)$[/tex], we have [tex]$|K| > |C_G(a)|\geq H$[/tex], and so [tex]$|G/K|\leq |G/H|\leq 2$[/tex]. Therefore, either [tex]$K=G$[/tex] or [tex]$K=H$[/tex], and in either case, we have [tex]$K\trianglelefteq G$[/tex] and [tex]$K\neq G$[/tex], since[tex]$g\notin K$[/tex].

Thus, we have shown that if [tex]$a$[/tex] has precisely two conjugates in [tex]$G$[/tex], then [tex]$G$[/tex] has a nontrivial proper normal subgroup.

To learn more about conjugates visit:

https://brainly.com/question/28175934

#SPJ11

Other Questions
Punctuation marks such as apostrophes, parentheses, dashes, and quotes may not seem like the most important elements in your writing. These small details, however, can change the meaning of your message and, if used incorrectly, can confuse your reader. Familiarize yourself with all punctuation marks, and understand how to use them to enhance your writing. From the following selections, choose the correctly punctuated sentence.You called the boss, didnt you?You called the boss? didnt you.You called the boss, didnt you. George is randomly selecting an outfit from his dresser. He has two pair of blue pants and four pair of black pants. In his closet there are two blue shirts, four green shirts, and one red shirt.1. what is the probability he selects black pants and a green shirt?2. what is the probability he selects a green or blue shirt?3. what is the probability he does not choose a blue shirt? The market portfolio has an expected return of 12.6 percent and a standard deviation of 22.6 percent. The risk-free rate is 5.6 percent. a. What is the expected return on a well-diversified portfolio with a standard deviation of 9.6 percent? (Do not round intermediate calculations and enter your answer as a percent rounded to 2 decimal places, e.g., 32.16.) b. What is the standard deviation of a well-diversified portfolio with an expected return of 20.6 percent? (Do not round intermediate calculations and enter your answer as a percent rounded to 2 decimal places, e.g., 32.16) In this problem you will go through a simplified version of Rutherfords calculation of the size of the gold nucleus. Suppose a piece of gold foil that is 0.010 cm thick and whose area is 1 cm x 1 cm is used in the experiment. It is observed that 99.93% of all -particles go through undeflected. The density of gold is 19,300 kg/m3. Determine the radius of the gold nucleus. Hint: first calculate the total number of gold atoms in the foil For a population with a proportion equal to 0.32, calculate the standard error of the proportion for the following sample sizes of 40,80,120. round to 4 decimal places explain the 3 types of business models and their differences. (b2b,b2c,c2c) distinguish between consumer products and business products. Consider the following reaction:CO2 (g) + CCl4 (g) 2 COCl2 (g)Use the data from the tables to calculate delta G for this reaction under the following conditions:a) standard conditionsb) P CO2 = 0.112 atm; P CCl4 = 0.174 atm; P COCl2 = 0.744 atm How many compounds with the formula C4H11N contain a 2 degree amine and a single 2 degree carbon atom?a.) 0b.) 1c.) 2d.) 3e.) 4 Problem 07.015.a -Determine the stress components after clockwise rotation of the element for the given state of stress. Determine the normal and the shearing stresses after the element shown has been rotated through 25 clockwise. (Round the final answers to two decimal places.) Normal stresses: _x= _____ksi (+ tensile; - compressive) _y=_____ k si (+ tensile: -compressive) Shearing stress: Tx'y'= ____ k si+ CCW on positive x-face) The length of time required for an investment to generate cash flows sufficient to recover the initial cost of the investment is called the:A. net present value.B. internal rate of return.C. payback period.D. profitability index.E. discounted cash period. Performance improvement is likely to occur when four conditions are true that include all of the following EXCEPTMultiple Choicerecipients believing change is necessary and feasible.appropriate improvement goals being set.improvement being recognized and rewarded.the recipient being young. Deep discount bonds reflect questionable quality. True False What does black lover mean Pls solve quick. Change verb in bracket according to the subject On November 10th, JumpStart Co. provides $2,900 in services to clients. At the time of service, the clients paid $600.00 in cash and put the balance on account.(a) Journalize this event.(b) On November 20th, JumpStart Co. clients paid an additional $900 on their accounts due. Journalize this event.(c) Calculate the amount of accounts receivable on November 30th. Overview As you are preparing for your final text game project submission, the use of dictionaries, decision branching, and loops will be an important part of your solution. This milestone will help guide you through the steps of moving from your pseudocode or flowchart to code within the PyCharm integrated development environment (IDE). You will be working with the same text-based game scenario from Projects One and Two. In this milestone, you will develop code for a simplified version of the sample dragon-themed game. The simplified version involves moving between a few rooms and being able to exit the game with an exit command. In the simplified version, there are no items, inventory, or villain. Developing this simplified version of the game supports an important programming strategy: working on code in small iterations at a time. Completing this milestone will give you a head start on your work to complete the game for Project Two. Prompt For this milestone, you will be submitting a working draft of the code for a simplified version of the text-based game that you are developing for Project Two. You will focus on displaying how a room dictionary works with the move commands. This will include the if, else, and elif statements that move the adventurer from one room to another. Before beginning this milestone, it is important to understand the required functionality for this simplified version of the game. The game should prompt the player to enter commands to either move between rooms or exit the game. Review the Milestone Simplified Dragon Text Game Video and the Milestone Simplified Text Game Flowchart to see an example of the simplified version of the game. A video transrpt is available: Transrpt for Milestone Simplified Dragon Text Game Video. IMPORTANT: The Move Between Rooms process in the Milestone Simplified Text Game Flowchart is intentionally vague. You designed a more detailed flowchart or pseudocode for this process as a part of your work on Project One. Think about how your design will fit into this larger flowchart. In PyCharm, create a new code file titled ModuleSixMilestone.py. At the top of the file, include a comment with your name. As you develop your code, you must use industry standard best practices, including in-line comments and appropriate naming conventions, to enhance the readability and maintainability of the code. Next, copy the following dictionary into your PY file. This dictionary links rooms to one another and will be used to store all possible moves per room, in order to properly validate player commands (input). This will allow the player to move only between rooms that are linked. Note: For this milestone, you are being given a dictionary and map for a simplified version of the dragon-themed game. Make sure to read the code carefully so that you understand how it works. In Project Two, you will create your own dictionary based on your designs. #A dictionary for the simplified dragon text game #The dictionary links a room to other rooms. rooms { Great Hall: {South: Bedroom}, Bedroom: {North: Great Hall, East: Cellar}, Cellar: {West: Bedroom} } A portion of the map for the Dragon Text Game showing the Great Hall, Bedroom, and Cellar, with arrows indicating the directions the player can move between them. The Cellar is to the East of the Bedroom, which is to the South of the Great Hall. Next, you will develop code to meet the required functionality, by prompting the player to enter commands to move between the rooms or exit the game. To achieve this, you must develop the following: A gameplay loop that includes: Output that displays the room the player is currently in Decision branching that tells the game how to handle the different commands. The commands can be to either move between rooms (such as go North, South, East, or West) or exit. If the player enters a valid move command, the game should use the dictionary to move them into the new room. If the player enters exit, the game should set their room to a room called exit. If the player enters an invalid command, the game should output an error message to the player (input validation). A way to end the gameplay loop once the player is in the exit room TIP: Use the pseudocode or flowchart that you designed in Step #4 of Project One to help you develop your code. As you develop, you should debug your code to minimize errors and enhance functionality. After you have developed all of your code, be sure to run the code to test and make sure it is working correctly. What happens if the player enters a valid direction? Does the game move them to the correct room? What happens if the player enters an invalid direction? Does the game provide the correct output? Can the player exit the game? Guidelines for Submission Submit your ModuleSixAssignment.py file. Be sure to include your name in a comment at the top of the code file. The considering the limitations of diffusion and osmosis, why does it make sense that life started with small cells in an aquatic environment? Select the statement(s) that accurately describe the function of the tonsils in the immune system.Pathogens are filtered from the bloodstream.Stimulates the immune system to respond accordingly.Red blood cells are created that help fight infectionsTraps and destroys foreign substances and filters them from the blood.Keeps pathogens (invaders) out by providing a barrier. The demand curve for salted codfish (saltfish) is D(p) = 200 5p and the supply curve is S(p) = 5p. 1 (a) On a graph with saltfish on the horizontal axis and the price of saltfish on the vertical, draw the demand and supply curves. What is the equilibrium price? What is the equilibrium quantity sold? (b) A quantity tax t = 2 per unit sold is placed on saltfish. On the same graph draw the new supply curve. (The price on the vertical axis remains the price paid by the demanders.) What is the new equilibrium price paid by the demanders? What is the new price received by the suppliers? What is the equilibrium quantity sold? (c) On your graph, shade in the area that represents the deadweight loss. Calculate the deadweight loss. Factor each completely if possible (1) x^2 - 11x + 28(2) 2x^2 + 8x + 6(3) k^2 - 25(4) a^2 - 9a + 20(5) 7x^2 - 11x - 6(6) 14x^2 - 52x + 30(7) 6n^3 - 8n^2 + 3n - 4(8) 15y^3 - 3v^2 + 20v - 4