A piece of metal of mass 23 g at 100 ◦C is
placed in a calorimeter containing 55.4 g of
water at 25◦C. The final temperature of the
mixture is 63.4
◦C. What is the specific heat
capacity of the metal? Assume that there is
no energy lost to the surroundings.
Answer in units of J
g ·
◦ C
.

Answers

Answer 1

Answer:

10.58 J/g-°C

Explanation:

To find the specific heat capacity of the metal, you need to know how much heat was lost when it reacted with water.

You know that there are 55.4 g of water, the initial temp. of water is 25°C, and the final temp. (the mixture's temp.) is 63.4°C.

You should also know that the specific heat capacity of water is 4.186 J/g-°C.

Plug this into the equation the q=mcΔT.

q = (55.4 g)(4.186 J/g-°C)(63.4°C - 25°C)

q = 8905.12896 J

If 8905.12896 J was gained by the water, then 8905.12896 J must have been lost from the metal.

You know that there are 23 g of the metal and that its initial temp. is 100°C.

Plug this information into q=mcΔT.

8905.12896 J = (23 g)(C)(63.4°C - 100°C)

C = 10.58 J/g-°C

*When you plug all of this into the calculator, it will result in a negative number but keep in mind that heat was LOST by the metal so 8905.12896 J  is essentially negative. So the negative cancels out.*


Related Questions

Element
H
Ba
Si
Group
1
2
6A
10
Period
3
4

Answers

The element "H" belongs to Group 1 and Period 1 of the periodic table. It is hydrogen, the lightest and most abundant element in the universe.

The element "Ba" belongs to Group 2 and Period 6 of the periodic table. It is barium, a soft, silvery-white alkaline earth metal.

The element "Si" belongs to Group 14 and Period 3 of the periodic table. It is silicon, a hard, brittle crystalline solid with a grayish color.

The element "H" belongs to Group 1 and Period 1 of the periodic table. It is hydrogen, the lightest and most abundant element in the universe. Hydrogen has one proton and one electron in its nucleus, and it is classified as a nonmetal.

It is highly reactive and can form compounds with other elements through various chemical reactions. Hydrogen plays a crucial role in the formation of water (H2O) and is used in various industrial processes, such as hydrogenation in the production of margarine and ammonia synthesis for fertilizer production.

The element "Ba" belongs to Group 2 and Period 6 of the periodic table. It is barium, a soft, silvery-white alkaline earth metal. Barium has an atomic number of 56, meaning it has 56 protons in its nucleus.

It is highly reactive and reacts vigorously with water and oxygen in the air. Barium compounds, such as barium sulfate and barium carbonate, have various applications, including in the production of pigments, glass, and fireworks. Barium is also used in medical imaging procedures, where barium sulfate is ingested or injected to visualize the gastrointestinal tract.

The element "Si" belongs to Group 14 and Period 3 of the periodic table. It is silicon, a hard, brittle crystalline solid with a grayish color. Silicon is a semiconductor and is widely used in the electronics industry for the production of computer chips, solar cells, and other electronic devices.

It has atomic number 14 and forms an important component of the Earth's crust, making up around 28% of its mass. Silicon is also a key element in the structure of many minerals, such as quartz and feldspar.

For more such questions on hydrogen visit:

https://brainly.com/question/24433860

#SPJ8

Too many objects inside a laboratory fume hood can disrupt the airflow and possibly compromise your safety. Which of the following are considered best practices in the use of a laboratory fume hood? Select all that apply. Then, select Submit. O Open the sash as much as possible O Work at least 25 cm inside the hood O Use fast, quick movements to limit your exposure O Place objects to one side-work on the other side O Use a raised shelf along the back of the hood

Answers

A laboratory fume hood, also known as a fume cupboard or fume cabinet, is a specially designed enclosure used in laboratories to protect workers from exposure to hazardous fumes, gases, vapors, or dust. The correct answer is:

1. Open the sash as much as possible

2. Work at least 25 cm inside the hood

4. Place objects to one side-work on the other side

5. Use a raised shelf along the back of the hood.

A fume hood typically consists of a transparent sash or door at the front that can be opened or closed, allowing access to the work area inside the hood. The hood is connected to an exhaust system that draws air through the hood, creating a negative pressure inside and preventing the escape of hazardous substances into the laboratory environment.

Opening the sash allows for better airflow and reduces the buildup of hazardous substances inside the hood. Working inside the hood ensures that you are within the protected area where airflow is present. Placing objects to one side of the hood and working on the other side helps maintain a clear and unobstructed airflow path. Using a raised shelf along the back of the hood allows for better organization of materials and equipment, keeping them within reach but away from the front of the hood.

Therefore, the correct options are:

1. Open the sash as much as possible

2. Work at least 25 cm inside the hood

4. Place objects to one side-work on the other side

5. Use a raised shelf along the back of the hood.

For more details regarding laboratory fume hood, visit:

https://brainly.com/question/10166359

#SPJ12

Final answer:

Best practices for using a lab fume hood include not opening the sash more than necessary, working at least 25 cm inside the hood, using slow, steady movements, arranging objects to one side, and using a raised shelf along the back of the hood. Much like fume hoods, biological safety cabinets use containment and directional airflow for safety.

Explanation:

When using a laboratory fume hood, it's crucial to observe best practices to ensure safety. The best practices include:

Not opening the sash more than necessary, because it can disrupt the airflow. Working at least 25 cm inside the hood which ensures that you are adequately protected from the fumes and that the airflow is not disrupted. Using slow, steady movements rather than fast, quick ones, limiting the chances of airborne particles being generated or disrupting the airflow. Arranging objects so they don't block the airflow - it's usually better to place objects to one side and work on the other. Using a raised shelf along the back of the hood can help to optimize airflow and improve safety.

Laboratory biological safety cabinets, or BSCs, also use a similar principle of containment and directional airflow to protect lab workers and the environment from exposure to hazards. For instance, Class I BSCs use air intake filters to prevent environmental contaminants from entering the workspace and air exhaust filters to contain pathogens within the hood.

Learn more about Laboratory Safety here:

https://brainly.com/question/33592496

#SPJ6

how did the report on the topic of climate change help the general public relate to the topic?​

Answers

Answer:

Report of the climate change can help the people. As when people wants to go for  picnics or somewhere else. They did not have any idea that what will be the climate when they go. Report of climate change help him to choose the right time for going on picnics or  somewhere else.

Answer:

The report mentioned ways that people’s lives may change because of climate change, such as rising sea levels, reduced crop efficiency, and heat waves. This information may encourage the public to change the way they use energy, for example how they heat their homes or power their cars.

Explanation:

Describe the work being done by Robin Reineke and her team.

Answers

Answer:

They study different way people have died or could die to better aid investigators.

Explanation:

2Al(s) + 3Cu(NO3) 2(ag) -> 3Cu(s) + 2Al(NO3)з(aq) why is this a redox reaction

Answers

Explanation:

The given chemical equation represents a redox (reduction-oxidation) reaction. Redox reactions involve the transfer of electrons between species, resulting in changes in the oxidation states of the elements involved. Let's analyze the oxidation states of the elements in this equation:

On the reactant side:

- Aluminum (Al) has an oxidation state of 0 since it is in its elemental form.

- Copper (Cu) in the Cu(NO3)2 compound has an oxidation state of +2.

- Nitrogen (N) in the Cu(NO3)2 compound has an oxidation state of +5.

- Oxygen (O) in the Cu(NO3)2 compound has an oxidation state of -2.

On the product side:

- Copper (Cu) in the Cu(s) has an oxidation state of 0 since it is in its elemental form.

- Aluminum (Al) in the Al(NO3)3 compound has an oxidation state of +3.

- Nitrogen (N) in the Al(NO3)3 compound has an oxidation state of +5.

- Oxygen (O) in the Al(NO3)3 compound has an oxidation state of -2.

By comparing the oxidation states of the elements before and after the reaction, we can observe the following changes:

- Aluminum (Al) undergoes oxidation, as its oxidation state increases from 0 to +3.

- Copper (Cu) undergoes reduction, as its oxidation state decreases from +2 to 0.

Since there is a transfer of electrons from aluminum to copper, this reaction is classified as a redox reaction. Aluminum loses electrons (oxidation) and copper gains those electrons (reduction).

Questions 7-10 refer to the following types of energy. (A) Activation energy (B) Free energy (C) Ionization energy (D) Kinetic energy (E) Lattice energy 7. The energy required to convert a ground-state atom in the gas phase to a gaseous positive ion __________ 8. The energy change that occurs in the conversion of an ionic solid to widely separated gaseous ions ___________ 9. The energy in a chemical or physical change that is available to do useful work ___________ 10. The energy required to form the transition state in a chemical reaction ___________

Answers

Answer:

7. Ionization energy

8. Lattice energy

9. Free energy

10. Activation energy

Explanation:

I. Ionization energy: The energy required to convert a ground-state atom in the gas phase to a gaseous positive ion. Thus, it is the minimum energy required to remove or detach an electron from a neutral atom in a gaseous state. Generally, atoms with relatively large atomic radii tend to have a low ionization energy.

II. Lattice energy: The energy change that occurs in the conversion of an ionic solid to widely separated gaseous ions. This ultimately implies that, it is the energy generated during the conversion of an ionic solid into gaseous ions and as such is a measure of the cohesive force binding the ions of an ionic compound using the Born-Haber cycle.

III. Free energy: the energy in a chemical or physical change that is available to do useful work. Thus, it is a thermodynamic quantity that measures the maximum capacity of a system to do work at constant temperature and pressure.

IV. Activation energy: The energy required to form the transition state in a chemical reaction. When the activation energy of a reaction is low, the rate of the reaction would be faster. Therefore, an enzyme speeds or catalyzes the rate of a reaction by lowering its activation energy.



What volume of 0.062 M HCl is needed to react to completely neutralize 19.4 mL of 0.050 M Ba(OH)2? *

Answers

Answer:

31.3 mL

Explanation:

We'll begin by writing the balanced equation for the reaction. This is illustrated below:

2HCl + Ba(OH)₂ —> BaCl₂ + 2H₂O

From the balanced equation above,

The mole ratio of the acid, HCl (nₐ) = 2

The mole ratio of the base, Ba(OH)₂ (n₆) = 1

Finally, we shall determine the volume of the acid need for the reaction as follow:

Molarity of acid, HCl (Mₐ) = 0.062 M

Mole ratio of the acid, HCl (nₐ) = 2

Volume of base, Ba(OH)₂ (V₆) = 19.4 mL

Molarity of base, Ba(OH)₂ (M₆) = 0.050 M

Mole ratio of the base, Ba(OH)₂ (n₆) = 1

Volume of acid, HCl (Vₐ) =?

MₐVₐ / M₆V₆ = nₐ / n₆

0.062 × Vₐ / 0.050 × 19.4 = 2/1

0.062 × Vₐ / 0.97 = 2

Cross multiply

0.062 × Vₐ = 0.97 × 2

0.062 × Vₐ = 1.94

Divide both side by 0.062

Vₐ = 1.94 / 0.062

Vₐ = 31.3 mL

Thus, the volume of the acid needed is 31.3 mL

Which noble gas is expected to show the largest deviations from the ideal gas behavior? A) helium B) neon C) argon D) krypton E) xenon why
he molar volume of a gas at STP is __________ L.
A) 0.08206
B) 62.36
C) 1.00
D) 22.4
E) 14.7

Answers

The noble gas expected to show the largest deviations from the ideal gas behavior is Xenon (Xe).The molar volume of a gas at STP is 22.4 L. This is because 1 mole of gas occupies 22.4 L of volume at 0°C and 1 atm pressure

The ideal gas behavior is only possible at low pressures and high temperatures. A gas can be assumed to be ideal if its atoms or molecules are far apart and there is no interaction between them. Since noble gases are monatomic gases and their atoms are quite far apart, they are expected to behave like ideal gases.However, xenon is the largest of all noble gases, and its atoms have large sizes and masses. As a result, they experience stronger attractive forces between atoms than the other noble gases, leading to deviations from ideal gas behavior.The molar volume of a gas at STP is 22.4 L. This is because 1 mole of gas occupies 22.4 L of volume at 0°C and 1 atm pressure. Hence, the correct answer is option D) 22.4.

Learn more about noble gas here:

https://brainly.com/question/32007931

#SPJ11


Which choice identifies the compound's structural formula, and what information does the structural formula provide
that the molecular formula does not?

Image B represents the structural formula, and only the structural formula allows the molecular
shape to be determined because it shows the position and alignment of the atoms and bonds.


Image B represents the structural formula, and only the structural formula allows the number of
atoms of each element in the compound to be determined because it provides subscripts.


Image A represents the structural formula, and only the structural formula allows the type of
bond formed by the compound to be determined because it shows the element symbols written
in order (metals and then nonmetals).


Image A represents the structural formula, and only the structural formula allows the bond
length of each bond between the atoms of the compound to be determined because it shows the
bonds represented by a line.

Answers

Answer:

second opinion is correct

What is a buffer used for?

A. To limit the pH change in a solution
B. To prevent an acid from dissociating
C. To neutralize the pH of a solution
D. To prevent a salt from dissolving

Answers

A, a buffer is used to limit or to stop any change to the pH in a solution.

A buffer is primarily used to limit the pH change in a solution. Option A is correct.

A buffer is the solution which contains the weak acid and its conjugate base or weak base and its conjugate acid. It is designed to resist changes in pH when small amounts of acid or base are added to it.

When an acid or base is added to a buffer solution, the buffer components react with the added ions to minimize the impact on the solution's pH. If an acid is added, the buffer will react with the acid by accepting the H⁺ ions. If a base is added, the buffer will react with the base by donating H⁺ ions. In both cases, the buffer helps maintain the pH at a relatively stable level.

To prevent an acid from dissociating, is not accurate. A buffer does not prevent an acid from dissociating. In fact, the acid in a buffer solution is necessary to provide the conjugate base and maintain the buffer's pH buffering capacity.

To neutralize the pH of a solution, is also not accurate. A buffer does not neutralize the pH of a solution to a particular value. Instead, it resists significant changes in pH when small amounts of acid or base are added.

To prevent a salt from dissolving, is unrelated to the purpose of a buffer. A buffer is not used to prevent the dissolution of salts.

Hence, A. is the correct option.

To know more about buffer here

https://brainly.com/question/31847096

#SPJ2

What do the horizontal portions of the graph represent? When heat is added to or removed from the substance and the temperature remains the same, where is the thermal energy going? Why?

Answers

i honestly don’t even know like what-

an unknown alkene was treated with mcpba in dichloromethane, followed by work-up with h2o/h . a racemic mixture of the compound shown below was obtained. what is correct name of the starting alkene? A. (Z)-3-Methylpent-2-ene B. (E)-3-Methylpent-2-ene C. 2-Methylpent-2-ene D. 2,3-Dimethylbut-2-ene E. none of the above

Answers

Option A. Z)-3-Methylpent-2-ene  is the correct name of the starting alkene

What is a starting alkene

A starting alkene refers to the initial unsaturated hydrocarbon compound used in a chemical reaction or synthesis. It is the precursor or starting material from which other compounds or products are formed through various chemical transformations.

In organic chemistry, alkene refers to a class of hydrocarbons that contain a carbon-carbon double bond. These compounds are important intermediates in many organic reactions and serve as building blocks for the synthesis of more complex molecules.

Read mote on alkene here:https://brainly.com/question/29120960

#SPJ4

Hydrated transition metal ions typically produce solutions that are _____ (a) acidic. (b) basic. (c) neutral (d) strongly basic. (e) strongly acidic.

Answers

Water molecules that surround the metal ions act as weak Brønsted-Lowry acids and donate protons to the solution, increasing its acidity.

Hydrated transition metal ions typically produce solutions that are acidic. Transition metal ions are elements from the transition series that are capable of forming coordination complexes that have characteristic colors, and they exhibit a wide range of oxidation states and show various magnetic properties.In addition, when transition metals react with water, they create hydrated metal ions, which produce acidic solutions. This is because water molecules that surround the metal ions act as weak Brønsted-Lowry acids and donate protons to the solution, increasing its acidity.Therefore, the correct answer is (a) acidic.

Learn more about Brønsted-Lowry acids here:

https://brainly.com/question/32276007

#SPJ11

why should atom or ions join together to form compounds? ​

Answers

Answer:

while atoms form together, they percentage their outermost electrons to create more sustainable strength states. This sharing bonds the atoms into an ionic shape or a molecule

Explanation:

i hope this help a little

The activity of a radioisotope is 3000 counts per minute at one time and 2736 counts per minute 48 hours later. What is the half-life of the radioisotope??
a) 831hr
b)521hr
c)361 hr
d)1.44hr

Answers

The half-life of the radioisotope is approximately 14.72 hours, which is closest to option d) 1.44 hr (1 hour and 26.4 minutes).

Radioisotopes are radioactive isotopes of elements that are used in a variety of applications, including medical imaging and cancer treatment. They are also used in geology and archaeology to determine the age of rocks and artifacts. The activity of a radioisotope is the rate at which it decays, measured in counts per minute (CPM). The half-life of a radioisotope is the amount of time it takes for half of the atoms to decay.

Given that the activity of a radioisotope is 3000 counts per minute at one time and 2736 counts per minute 48 hours later, we can use the formula A = A₀ (1/2)^(t/T) to find the half-life of the radioisotope.

Where A is the activity after time t, A₀ is the initial activity, T is the half-life, and t is the time elapsed.

Substituting the values given in the problem, we get:

2736 = 3000 (1/2)^(48/T)

Dividing both sides by 3000, we get:

0.912 = (1/2)^(48/T)

Taking the natural logarithm of both sides, we get:

ln 0.912 = ln (1/2)^(48/T)

Using the rule that ln (a^b) = b ln a, we get:

ln 0.912 = (48/T) ln (1/2)

Dividing both sides by ln (1/2), we get:

ln 0.912 / ln (1/2) = 48/T

Using a calculator to evaluate the left-hand side, we get:

3.26 = 48/T

Multiplying both sides by T, we get:

3.26T = 48

Dividing both sides by 3.26, we get:

T ≈ 14.72 hours

Therefore, the half-life of the radioisotope is approximately 14.72 hours, which is closest to option d) 1.44 hr (1 hour and 26.4 minutes).

To know more about radioisotope refer here: https://brainly.com/question/13143662#

#SPJ11

a different student trying to determine if a different white solid is a true hydrate heats the sample and observes water droplets on the side of the test tube. the residue obtained is brownish and dissolves in water, producing a solution that is dark reddish-brown. is this a true hydrate? provide full reasoning.

Answers

Based on the observations described, it is likely that the white solid is a true hydrate.

Water droplets on the side of the test tube: When heating a hydrate, the water molecules trapped within the crystal lattice are released as vapor. The presence of water droplets on the side of the test tube indicates that water was indeed released during the heating process.

Brownish residue: The brownish residue obtained after heating the solid suggests that the white solid might contain a transition metal ion. Transition metal ions can form complex compounds that exhibit different colors, including brown.

Dissolving in water: The brownish residue dissolves in water, indicating that it is soluble in the solvent.

Dark reddish-brown solution: The solution obtained after dissolving the brownish residue is described as dark reddish-brown. This color could be attributed to the formation of a complex compound between the transition metal ion in the residue and the water or other substances present in the solution.

Based on the observations of water droplets upon heating, the brownish residue that dissolves in water, and the resulting dark reddish-brown solution, it is likely that the white solid is a true hydrate.

The presence of water droplets and the dissolution of the residue suggest that water was released from the solid during heating, indicating the presence of water molecules within the crystal lattice.

The color change to brownish and the subsequent dark reddish-brown solution point towards the involvement of a transition metal ion, possibly forming a complex compound.

To know more about hydrate visit:

https://brainly.com/question/29188417

#SPJ11

Which has the highest heat capacity? (Values of heat capacities and calculations are unnecessary). a. 1000 L of liquid water b. 10 g of sand c. 1 g of Iron d. 5g of glass

Answers

Option a, 1000 L of liquid water, is likely to have the highest heat capacity among the given options.

The heat capacity of a substance refers to the amount of heat energy required to raise the temperature of that substance by a certain amount. In general, substances with higher molar masses and larger numbers of atoms or molecules tend to have higher heat capacities.

Given the options provided:

a. 1000 L of liquid water has a higher heat capacity compared to the other options because water has a relatively high molar mass and specific heat capacity.

b. 10 g of sand generally has a lower heat capacity compared to water since sand has a lower molar mass and specific heat capacity.

c. 1 g of iron has a moderate heat capacity. While iron has a higher molar mass compared to sand, it typically has a lower specific heat capacity than water.

d. 5 g of glass generally has a lower heat capacity compared to water, as glass has a lower molar mass and specific heat capacity.

Therefore, option a, 1000 L of liquid water, is likely to have the highest heat capacity among the given options.

Learn more about Specific heat capacity from the link given below.

https://brainly.com/question/1105305

#SPJ4

Which lists the structures, in correct order, through which light passes when it enters the eye?


cones, pupil, lens, sclera

sclera, iris, pupil, lens

vitreous humor, lens, pupil, cornea

cornea, pupil, lens, vitreous humor

hurry plz

Answers

Answer:

cornea, pupil, lens, vitreous humor

Answer:

cornea, pupil, lens, vitreous humor 

Explanation:

Calculate ΔH°298 for the process Co3O4(s) ⟶ 3Co(s) + 2O2(g) from the following information:
Co(s) + 1/2O2(g) ⟶ CoO(s) ΔH°298 = −237.9kJ
3CoO(s) +1/2O2(g) ⟶ Co3O4(s) ΔH°298 = −177.5kJ

Answers

The ΔH° 298 for the process Co₃O₄ (s) ⟶ 3 Co (s) + 2 O₂(g) is -536.2 kJ.

What is the ΔH° of the reaction?

To calculate ΔH° 298 for the process:

Co₃O₄ (s) ⟶ 3 Co (s) + 2 O₂(g)

First, we reverse the second reaction and change the sign of the enthalpy change:

Co₃O₄ (s) ⟶ 3 CoO (s) + 1/2 O₂ (g) :ΔH°298 = +177.5 kJ

Multiply the first reaction by 3 to match the number of CoO(s) in the second reaction:

3 Co(s) + 3/2 O₂ (g) ⟶ 3 CoO(s) ΔH°298 = 3 * (-237.9) kJ = -713.7 kJ

Sum the reactions and their enthalpy changes to obtain the desired reaction:

3 Co(s) + 3/2 O₂(g) + Co₃O₄(s) ⟶ 3 CoO(s) + 1/2 O₂(g) + Co₃O₄ (s) ΔH°298 = -713.7 kJ + 177.5 kJ

ΔH° 298 = -536.2 kJ

Learn more about ΔH° at: https://brainly.com/question/28263454

#SPJ4

molecular mass meaning in chemistry?

Answers

Answer:

Molecular mass is a number equal to the sum of the atomic masses of the atoms in a molecule.

Explanation:

The molecular mass gives the mass of a molecule relative to that of the 12 C atom, which is taken to have a mass of 12. Hence why Molecular mass is a number equal to the sum of the atomic masses of the atoms in a molecule.

state one advantage of drinking hard water rather than drinking soft water​

Answers

Answer: Have a great day!

Explanation: Unlike hard water, soft water is free of harsh minerals that can damage your home and your body. In other words, it is more gentle on your body and your home. Without calcium and magnesium, soft water can prevent scale buildup around your home including your appliances and pipes.

!!MARKING BRAINLIEST!! Please help this is due at midnight!! No websites please just help me! :(

Answers

Answer:

I'll do the first one for you. The reason why I'm not going to do the rest is because this is pretty simple stuff. I'll explain how I got the answer, please read it ^^ the rest of the problems should be a breeze.

1. 5.454285714285714 liters, or approx. 5.45 liters

Explanation:

P1V2 = P2V2

P1 refers to the original pressure. V1 refers to the original volume, or the amount of space the gas takes up.

P2 and V2 refer to the final pressure or volume, accordingly.

You insert the values into the equation, like so:

(8.3)(46) = (70)(x)

Now, multiply.

381.8 = 70x

Use inverse operations to find the value of x. Divide 381.8 by 70 to isolate x.

381.8/70 = x

5.454285714285714 = x

The volume of the gas when the pressure is increased to 70.0 mm Hg is approximately 5.45 liters. Don't forget about the units at the end, when you write your final answer.

Important! When pressure increases, volume decreases, and vice versa. Volume and pressure for gases are inversely proportional. So even though the pressure increased, that doesn't mean the volume increases, too.

You can check your answers easily!

Just multiply your final answer by its corresponding pressure or volume and compare it to the other. I hope that made sense. Like so:

5.454285714285714 x 70 = 381.8

8.3 x 46 = 381.8

That makes P1V2 DOES equal P2V2, and your answer is correct.

I hope this helped in time for you to submit it before the deadline! Good luck.

Tips!

For #2: I'm pretty sure the mentioning of the temperature (25.0 °C) doesn't matter. You can ignore it, it won't affect your calculations.

For #4: the standard pressure in mm Hg (millimeters of mercury) is 760 mm Hg. That's your P2.

How many moles of water are consumed if 0.729 mol H

Answers

1) State the equation that represents the chemical reaction

P2O5 + 3H2O → 2H3PO4

2) State the molar ratios: 1 mol P2O5 : 3 mol H2O : 2 mol H3PO4

3) Use the proportions 3molH2O / 2 mol H3PO4

0.729 mol H3PO4 * [ 3 mol H2O / 2 mol H3PO4] = 1.094 mol H2O

Answer: 1.094 mol of water

Answer: The answer that i got for this is 1.09 give the other kid the brainliest.

Explanation:

The V/Q ratio of a normal upright lunch is 0.8, this indicates that ventilation is _______________ than perfusion.

Answers

The V/Q (Ventilation/Perfusion) ratio of a normal upright lung is 0.8, which indicates that ventilation is less than perfusion.

The V/Q ratio is a measure of the ratio between the amount of ventilation (airflow) reaching the alveoli of the lungs and the amount of blood perfusion (blood flow) in the pulmonary capillaries. In a normal upright lung, the V/Q ratio is 0.8, which means that ventilation is less than perfusion.

Ventilation refers to the movement of air into and out of the alveoli, allowing for gas exchange. Perfusion, on the other hand, refers to the blood flow in the pulmonary capillaries, which carries deoxygenated blood to the lungs for oxygenation.

A V/Q ratio of 0.8 indicates that there is relatively less airflow (ventilation) compared to blood flow (perfusion) in the lung. This can occur in certain areas of the lung where blood flow is relatively high compared to the amount of air reaching those regions. Factors such as gravity and differences in regional blood flow can contribute to this imbalance in ventilation and perfusion.

Learn more about ventilation here:

https://brainly.com/question/31440202

#SPJ11

The mass in grams of 2.6 x 10^22 chlorine atoms is
a.4.4
b.0.76
c.1.5
d.11

Answers

I believe the answer is 11

A copper coin with a mass of 6.30 grams changes temperature in the sunshine from 20.0°C to 32.0°C. How much energy is transferred? The specific heat capacity of copper is 0.377 joules/gram degree Celsius. Express your answer to three significant figures.

The amount of energy transferred to the coin is
joules.

Answers

Answer:

q = mC∆T

q = heat = ?

m = mass = 6.30 g

C = specific heat = 0.385 J/g/deg

∆T = change in temperature = 32-20 = 12º

q = ((6.30 g)(0.385 J/g/deg)(12 deg) = 29.1 J (to 3 significant figures)

Explanation:

a=MCAS Z=AESDR the game for a few

Anyone know how to do this? It’s for Chemisty

Answers

You have to take the top quantity and divide it by the crossponent

How do plants respond to seasonal changes

Answers

Answer

Plants can respond to the change of season by losing their leaves, flowering, or breaking dormancy. Plants go through seasonal changes after detecting differences in day length.

Explanation:

For the reaction :
2NH 3

(g)→N 2

(g)+3H 2

(g)
if rate of disappearance of of NH 3

is 1.7 gm/sec then rate of appearance of N 2

should be:

Answers

The Required Correct Answer for the rate of appearance of N2 is 1.4 g/s.

Explanation : Given reaction is2NH3(g) → N2(g) + 3H2(g)The stoichiometric coefficients of NH3 and N2 in the balanced chemical equation are 2 and 1 respectively, which indicates that one mole of N2 is produced for every 2 moles of NH3 consumed.The rate of disappearance of NH3 is 1.7 g/s.

Number of moles of NH3 disappearing per second can be determined by the following formula:n = m/MwWhere,n = number of moles of NH3 disappearing per secondm = mass of NH3 disappearing per secondMw = molecular weight of NH3.The molecular weight of NH3 is 17 g/mol.

So,m/Mw = 1.7/17= 0.1 mole/sNow we know that 2 moles of NH3 produce 1 mole of N2. Hence, 0.1 mole/s of NH3 will produce (1/2) × 0.1 = 0.05 mole/s of N2The mass of N2 produced can be calculated by using the formula:m = n × MwThe molecular weight of N2 is 28 g/mol.So, m = 0.05 × 28= 1.4 g/s

Therefore, the rate of appearance of N2 is 1.4 g/s.

Learn more about rate of appearance of a reaction here https://brainly.in/question/56331389

#SPJ11

T/F if you take an antacid tablet, the ph in your stomach will increase. this means your stomach juice becomes more acidic.

Answers

If you take an antacid tablet, the ph in your stomach will increase. this means your stomach juice becomes more acidic - False

The stomach's pH will rise if a person takes an antacid pill. Antacids neutralise excess stomach acid to treat conditions like gastroesophageal reflux disease, heartburn, and acid indigestion. They usually consist of elements such as calcium carbonate, magnesium or aluminium hydroxide; when coupled with stomach acid, these elements react to form salts and water.

Antacids reduce the acidity of the stomach contents by raising the pH level and neutralising the stomach's acid. This can aid in reducing the symptoms brought on by excessive acid production. Therefore, it is untrue that taking an antacid increases the acidity of the stomach liquid.

Read more about stomach on:

https://brainly.com/question/29812006

#SPJ4

Other Questions
During basketball practice, you make 8 free throws out of 20 shots taken. Usingexperimental probability, how many free throws would you score out of 50shots taken? Assume the following (1) sales-$200.000, (2) unit sales - 10,000, 3) the contribution margin ratio-25%, and (4) net operating income $10,000. Given these four assumptions, which of the following is true? Multiple Choice A. The total fixed expenses-$150,000 B. The total contribution margin-$40,000 C. The variable expense ratio is 300% D. The break-even point is 8.000 units The graph below represents the motion of four cars, labeled W, X, Y, and Z.wDistanceTimeWhich car traveled at a constant speed throughout its motion?O AW. O c.ruOD. Z determine the normal and shear stresses at point d that act perpendicular and parallel, respectively, to the grains. the grains at this point make an angle of 35 with the horizontal as shown. The accounting entry for a sales invoice is debit Accounts Receivable, credit Sales. debit Sales, credit Bank. debit Sales, credit Accounts Payable. debit Accounts Payable, credit Sales. Solve the following differential equation: dV/d= V cot + V^3cosec WHY IS NO ONE ANSWERING MY QUESTIONS Question 7 of 10Which is part of the nonspecific immune response?O A. LymphocytesB. Killer T cellsC. Production of antibodiesD. InflammationSUBMIT You are a struggling song writer. You hear a group on the radio singing a songthat you wrote with a friend who is now managing the band. You want tomake sure you are not cheated out of your creative work. You have tried totalk to the band but they won't respond. What writ would effectively stop theband from earning income on that song until the problem is remedied?A. A mandatory injunctionO B. A permanent injunctionO C. A restraining orderO D. Punitive damagesMy Barkly Doghouses charges$50 per sq. ft. for their doghouses. What is the cost of adoghouse that is 4.8 sq. ft.?Please Help! Predict whether or not the following compounds would be more soluble in an acidic solution, a basic solution, or whether pH would have little to no effect on its solubility. A. AgBr Select] B. LiF [Select] C. Ca(OH)2 [Select ] D. Fel: [Select ] 10 sentences of how you can make the earth a better place 2 paragraphs about it What is entomophagy? nue when he had made 300,000 copies? (5pts) 3. An asset is purchased for P9000. Its estimated economic life is 10 years after which it will be sold for P1000. Find the depreciation in the first three A point charge of +10 C is at (+3 m, 0 m) on the x-axis and a point charge of +10 C is at (-3 m,0 m).a. Determine the work required to assemble this charge distribution.W = ________ Jb. Find the magnitude of the electric field at a point (0,+3 m) on the y-axis.E = __________ x103 N/CA charge q = +1 C is placed at this point. Find the magnitude of the force on the 1 C charge.c. A charge q= +1 C is placed at a point (0,+3 m) on the y-axis. Find the magnitude of the force on the 1 C charge.F = ____________ x10-3 N Based on the graph of the trigonometric functions f () = 4sin + 3 and g () = cos 2, at what value(s) on the interval [0, 2) does f () = g ()? pi over 4 comma 3 times pi over 4 comma 5 times pi over 4 comma 7 times pi over 4 3 times pi over 2 pi over 2 comma 5 times pi over 2 5 times pi over 4 comma 7 times pi over 4 P Company owns 80% of the common stock of S, Inc. In the current year, P Company reports sales of $10,000,000 and cost of goods sold of $7,500,000. For the same period, S Inc. has sales of $200,000 and cost of goods sold of $160,000. During the year , P Company sold merchandise to Sinc. for $60,000 at a price based on the normal markup (Hint use seller's sales and COGS to determine gross profit rate) At the end of the year, S Inc. still possesses 30 percent of this inventory Assume the same information, except SIncsold inventory to P Company, Compute consolidated sales. Multiple Choice $10.200.000 $10,140,000 $10, 200,000. $10.140.000. $10.126,000. $10.000,000. $10,260,000 Pls help, Does anyone know of a free website to make political cartoons? Thx! Please help me, brainlist will be givin. Tea costs 1.40 and coffeecosts 65p how much will 5coffees and 2 teas cost?