Answer:
The magnitude of the work performed by the mover is 1863 J.
Explanation:
The work can be found using the following equation:
[tex] W = F*d [/tex]
Where:
F: is the force
d: is the displacement = 8.1 m
First, we need to find the net force in the horizontal direction, as follows:
[tex] \Sigma F_{x} = ma = 0 [/tex]
a = 0 since the mover slides a refrigerator at a constant velocity.
[tex] F_{x} = F_{f} = -230 N [/tex]
[tex]F_{f}[/tex]: is the friction force.
Then, the work is:
[tex] W = F*d = -230 N*8.1 m = -1863 J [/tex]
Therefore, the magnitude of the work performed by the mover is 1863 J.
I hope it helps you!
Energy that is stored is called...
Answer:
Potential energy
Explanation:
Potential energy is stored energy and the energy of position––gravitational energy. There are several forms of potential energy. Electrical Energy is the movement of electrical charges. Everything is made of tiny particles called atoms.
- Scientific Forms of Energy_ Stored Energy, Kinetic Energy ...ei.lehigh.edu › learners › energy › readings › energy_basics
Which of the following is related to a person’s self-concept?
A) what neighborhood he or she lives in
B) his or her sense of self-worth
C) how good an athlete he or she is
D) how attractive he or she is
Answer:
Im not a 100 percent sure but i thinks it za A
Explanation:
As a young boy swings a yo-yo parallel to the ground and above his head, the yo-yo has a centripetal acceleration of 250 m/s2 . If the yo-yo’s string is 0.50 m long, what is the yo-yo’s tangential speed?
Centripetal acceleration ac is the acceleration experienced while in uniform circular motion. It always points toward the center of rotation. It is perpendicular to the linear velocity (tangential speed) v and has the magnitude:
[tex]a_c = \dfrac{v^2}{R}[/tex]
Solving for v:
[tex]v = \sqrt{a_c R} = \sqrt{(250\;m/s^2)(0.50\;m)} = 5\sqrt{5}\;m/s \approx 11.18\;m/s[/tex]
The yo-yo’s tangential speed 11.18 m/sec.
What is speed?The speed of an object is the magnitude of the change of its position over time or the magnitude of the change of its position per unit of time; it is thus a scalar quantity.
Centripetal acceleration ac is the acceleration experienced while in uniform circular motion. It always points toward the center of rotation. It is perpendicular to the linear velocity (tangential speed) v and has the magnitude:
[tex]a_{c} = v^2/r[/tex]
Solving for v
[tex]v = \sqrt{a_{c}r }[/tex] = 11.18 m/sec
The yo-yo’s tangential speed 11.18 m/sec.
To learn more about speed refer to the link:
brainly.com/question/28224010
#SPJ2
A projectile is fired at an angle such that the vertical component of its velocity
and the horizontal component of its velocity are BOTH equal to 30 m/s.
a. Using the approximate value of g = +/-10 m/s2, how long in time does it take for the
ball to reach its high point?
Answer:
It takes 3 seconds to reach its high point
Explanation:
Projectile Motion
In a projectile motion (or 2D motion), the object is launched with an initial angle θ and an initial velocity vo.
The components of the velocity are
[tex]v_{ox}=v_o\cos\theta[/tex]
[tex]v_{oy}=v_o\sin\theta[/tex]
The speed in the horizontal direction at any time t is:
[tex]v_y=v_o\sin\theta-g.t[/tex]
The time taken to reach the maximum height is when vy=0, or:
[tex]\displaystyle t_m=\frac{v_o\sin\theta}{g}[/tex]
We are given the y-component of the velocity, thus:
[tex]\displaystyle t_m=\frac{30~m/s}{10~m/s^2}[/tex]
[tex]t_m=3~s[/tex]
It takes 3 seconds to reach its high point
Question 6 (14 points)
A 3.68 kg object is tied to the end of a cord and whirled in a horizontal circle of radius 881 cm. The object completes 10.8 revolutions every 18.8
s. What is the centripetal acceleration of the object?
Answer:
[tex]a=114\ m/s^2[/tex]
Explanation:
Given that,
Mass of an object, m = 3.68 kg
It is whirled in a horizontal circle of radius 881 cm or 8.81 m
The object completes 10.8 revolutions every 18.8 s.
We need to find the centripetal acceleration of the object. It is given by the formula as follows :
[tex]a=\omega^2 r[/tex] ...(1)
Where [tex]\omega[/tex] is angular velocity
10.8 revolutions = 67.85 rad
[tex]\omega=\dfrac{67.85\ rad}{18.8\ s}\\\\=3.6\ rad/s[/tex]
Put values in equation (1)
[tex]a=3.6^2\times 8.81\\\\a=114\ m/s^2[/tex]
So, the centripetal acceleration of the object is [tex]114\ m/s^2[/tex].
PLEASE HELP!
Formulate a conclusion about what happens to the pH of a substance when an
acid and base are mixed.
Answer:
They gon' hate me regardless, that's why I do what I do (what I do)
See me in person i'm flawless (I'm flawless girl), i might just snatch up your dude (hahahaha)
Explanation:
i just want to be....appreciated
Kylie has a mass of 54 kg and is jogging at a velocity of 3 m/s what is Kylie’s kinetic energy?
Where does compression often occur?
Answer:
a convergent boundary^^
Explanation:
hope it helped
A sky diver with a mass of 80 kg jumps from a plan. They are accelerating at a constant rate due to gravity which is 9.8 m/s2. What is the net Force of the sky diver? Show your work.
Answer:
At terminal velocity, the drag force = mass x g
Explanation:
Force = 80 kg x 9.8 m/s2 = 784 kgm/s2 = 784 N
Find the distance Sara walks from A to B, B to C
then C to D?
Answer:
16m
Explanation:
5m pluse 5m equals 10m 3m pluse 3m equals 6m 10m pluse 6m equals 16m thats ju ansar
Harry Styles fires a T-shirt cannon horizontally off a stage 10 meters high, with an
initial velocity in the x-direction of 5 meters per second. How far away from the
stage should you stand to be able to catch the t-shirt?
Answer:
7.15 m
Explanation:
From the question given above, the following data were obtained:
Height (h) = 10 m
Initial velocity (u) = 5 m/s
Horizontal distance (s) =?
Next, we shall determine the time taken for the shirt to get to the ground. This can be obtained as follow:
Height (h) = 10 m
Acceleration due to gravity (g) = 9.8 m/s²
Time (t) =?
h= ½gt²
10 = ½ × 9.8 × t²
10 = 4.9 × t²
Divide both side by 4.9
t² = 10 / 4.9
t² = 2.04
Take the square root of both side
t = √2.04
t = 1.43 s
Finally, we shall determine the horizontal distance travelled by the shirt. This can be obtained as follow:
Initial velocity (u) = 5 m/s
Time (t) = 1.43 s
Horizontal distance (s) =?
s = ut
s = 5 × 1.43
s = 7.15 m
Thus, the shirt will land at 7.15 m away from the stage. Thus, to catch the shirt, you must be at a point 7.15 m away from the stage.
In a physics demonstration, two identical balloons (A and B) are propelled across
the room on horizontal guide wires. The motion diagrams (depicting the relative
position of the balloons at time intervals of 0.05 seconds) for these two balloons are
shown below.
Balloon A
Balloon B
Which balloon (A or B) has the greatest acceleration? Explain.
Which balloon (A or B) has the greatest final velocity? Explain.
Cobalt (Co) has an atomic mass of 59 and an atomic number of 27. Which statement correctly describes an atom of cobalt?
O A. An atom of cobalt contains more neutrons than protons.
B. An atom of cobalt contains more electrons than protons.
O C. An atom of cobalt contains the same number of neutrons and protons.
O D. An atom of cobalt contains the same number of neutrons, electrons and protons.
Answer:
Option A. An atom of cobalt contains more neutrons than protons.
Explanation:
From the question given above, the following data were obtained:
Mass number = 59
Atomic number = 27
Next, we shall determine the number of protons in the atom. This is illustrated below:
Atomic number of an element is simply defined as the number of protons in the atom of the element. Thus,
Atomic number = proton number
Atomic number = 27
Therefore,
Proton number = 27
Next, we shall determine the neutron number. This can be obtained as follow:
Mass number = 59
Proton number = 27
Neutron number =?
Mass number = Proton + Neutron
59 = 27 + Neutron
Collect like terms
Neutron = 59 – 27
Neutron number = 32
Next, we shall determine the number of electrons. This can be obtained as follow:
Since the atom is neutral i.e it has no charge, then, the number of protons and electrons are equal. Thus,
Electron number = Proton number
Proton number = 27
Therefore,
Electron number = 27
Summary:
Mass number = 59
Atomic number = 27
Proton number = 27
Neutron number = 32
Electron number = 27
From the above, we can see that the atom of cobalt contains:
1. More neutrons than protons.
2. The same number of protons and electrons.
Therefore, option A gives the correct answer to the question.
HELP PLZZZ!!!! Hurry
3. What does doubling the number of coils do to the strength of the electromagnet?
4. What does doubling the voltage do to the strength of the electromagnet?
5. Using the graph, predict how many paper clips a 7.5 V battery would pick up for both the 25-
coil electromagnet and the 50-coil electromagnet.
6. Calculate the slope of the 25-coilline and the 50-coil line to determine the average number of
paper clips that a 1 V battery would pick up.
Answer:
3. When the number of turns, N is doubled, the strength of the electromagnet is also doubled
4. Doubling the voltage, doubles the strength of the electromagnet
5. The number of paper clips a 7.5 V battery would pick is approximately 28 paper clips
The number of paper clips a 7.5 V battery would pick is 59 paperclips
6. For the 50-coil electromagnet, the average number of paper clips a 1 V battery would pick is approximately 7 paperclips
For the 50-coil electromagnet, the average number of paper clips a 1 V battery would pick is 16 paperclips
Explanation:
3. The Magnetomotive Force, MMF = The Number of Turns on the Coil, N × The Current I Flowing in the Coil, I
∴ MMF = N × I
When the number of turns, N is doubled, the magnetomotive force, MMF is also doubled, and the strength of the electromagnet is doubled
4. Given that the voltage, V applied to the coil = The current, I flowing × The resistance, R of the coil, we have
V = I × R
Therefore, for a given constant resistance in the coil, doubling the voltage, doubles the current and therefore doubles the strength of the electromagnet
5. The average slope for the 25-coil electromagnet = (23 - 12)/(6 - 3) = 3.[tex]\bar 6[/tex]
The number of paper clips a 7.5 V battery would pick = 12 + (7.5 - 3) × 11/3 = 28.5 paperclips ≈ 28 paper clips
The average slope for the 50-coil electromagnet = (48 - 26)/(6 - 3) = 7.[tex]\bar 3[/tex]
The number of paper clips a 7.5 V battery would pick = 26 + (7.5 - 3) × 22/3 = 59 paperclips
6. The slope calculated from a start point of approximately 0.4 V, is given as follows;
The slope for the 25-coil electromagnet = (12 - 6)/(3 - 0.4) = 30/13
Therefore, for the 25-coil electromagnet, the average number of paper clips a 1 V battery would pick = 6 + (1 - 0.4) × 30/13) = 96/13 ≈ 7 paperclips
The slope for the 50-coil electromagnet = (26 - 13)/(3 - 0.4) = 5
Therefore, for the 50-coil electromagnet, the average number of paper clips a 1 V battery would pick = 13 + (1 - 0.4) × 5 = 16 paperclips
3. When the number of revolutions, N, is twice, the electromagnet's strength is doubled as well.
4. Doubling the voltage doubles the electromagnet's strength.
5. The number of paper clips selected by a 7.5 V battery is 59.
6. For a 50-coil electromagnet, a 1 V battery would pull up around 7 paperclips on average. The average number of paper clips picked by a 1 V battery for a 50-coil electromagnet is 16 paperclips.
What is electromagnet?The magnetic field of an electromagnet is created by an electric current. Electromagnets are caused from conducting wire wriggled into a coil.
A magnetic field is created in the hole by a current passing through the wire.
The magnetic field production is increased by;
1) increasing the number of turns
2) increase the area of the loop
3) by moving the magnet faster
Answer for the following given options as follows;
3. When the number of revolutions, N, is twice, the electromagnet's strength is doubled as well. Because the no of coils in the circuit is directly proportional to the strength of electromagnet.
4. From the ohm's law principal doubling the voltage twice the current and hence the electromagnet's strength for a given constant resistance in the coil increases.
5. For the 25-coil electromagnet, the average slope is ;
[tex]\rm m_{avg}= \frac{23-12}{6-3} \\\\ m_{avg}= 3[/tex]
The number of paper clips selected by a 7.5 V battery is;
[tex]\rm n = 12+ (7.5-+3)\times \frac{11}{3}\\\\n = 28.5[/tex]
For the 50-coil electromagnet, the average slope;
[tex]\rm (m_{avg})_{50}= \frac{48-26}{6-3} \\\\\ \rm (m_{avg})_{50}= 7[/tex]
The number of paper clips selected by a 7.5 V battery is;
[tex]\rm N = 26+(7.5-3) \times \frac{22}{3} \\\\ N= 59[/tex]
The following is the slope determined from a starting position of around 0.4 V:
For the 25-coil electromagnet, the slope is;
[tex]\rm m_{25}=\frac{12-6}{3-0.4} \\\\\ m_{25}=\frac{6}{2.6} \\\\ m_{25}=\frac{30}{13}[/tex]
As a result, the average number of paper clips a 1 V battery would choose for the 25-coil electromagnet is;
[tex]\rm N_{25}=6+ (1-0.4)\times \frac{30}{13} \\\\ N_{25}=\frac{96}{13} \\\\ N_{25}= 7 \ paperclip[/tex]
For the 50-coil electromagnet, the slope is;
(26 - 13)/(3 - 0.4) = 5.
As a result, the average number of paper clips picked by a 1 V battery is;
[tex]\rm N'_{50}= 13+ (1-0.14)\times 5 \\\\ N'_{50}=16[/tex]
Hence,the average number of paper clips picked by a 1 V battery for a 50-coil electromagnet is 16 paperclips.
To learn more about the electromagnets, refers to the link:
https://brainly.com/question/23727978
#SPJ5
please help !!!!! I’ll give brainliest !
I think A but I dont really know
How long does it take to run 2000 meters if you run 2 m/s
Answer:
1000 seconds.
Explanation:
A 90 kg body is taken to a planet where the acceleration due to
gravity is 2.5 times that of the earth. What is the weight of this body
on the surface of this planet? Take g = 10 m/s?.
Answer:
225 kg.
Explanation:
Since the gravity is 2.5 times than that of the Earth, g on that planet = (10 * 2.5) m/s = 25 m/s.
Hence, the weight of the body would be (90 * 2.5) kg, aka 225 kg.
Hope this helped!
How can we use magnetic fields to transport objects from one location to another?
Does natural selection produce a change in individuals or populations?
Explanation:
Natural selection is the process through which populations of living organisms adapt and change. Individuals in a population are naturally variable, meaning that they are all different in some ways. This variation means that some individuals have traits better suited to the environment than others
Jake and Amir are both standing on identical skateboards and
perform a physics experiment in which they push off one
another to move. Jake is taller and more massive than Amir. If
Jake pushes with 20 N of force, what force would he feel
backwards away from Amir? F= N
Answer: 20
Explanation:
If Jake pushes with 20 N of force, the force that he would feel backwards away from Amir is 20N
Force simply means the strength or energy that can later the position of an object. Force can also be described as a push or pull.
It should be noted that since Jake pushes with 20 N of force, the force that he would feel backwards away from Amir will be the exact force that was used in pushing.
This will therefore be 20 Newton as well.
Read related link on:
https://brainly.com/question/18038995
3. Which of the following is an example of Newtons second law of motion? (2 points)
O Caties skateboard hits a curb and she falls forward onto the grass.
O A tissue and a rock are dropped from a ladder. The rock exerts a greater force when it hits the ground.
A person stands on a chair and pushes down, and the chair pushes upwards on the person.
Tires from a bike push against the road, and the road pushes back.
Answer:b
Explanation: i took the test and b was correct
when it comes to graphs I am no genius lol
Answer:
Option B
Explanation:
Displacement = Area under the velocity-time graph
So to find the displacement of a particle from 7 to 8 seconds we take the triangle and calculate its area.
[tex]Area\ of\ a\ right\ angled\ triangle = \frac{1}{2}*(base)*(height) \\\\Area\ of\ a\ right\ angled\ triangle = \frac{1}{2}*(1)*(3) \\\\Area\ of\ a\ right\ angled\ triangle = 1.5[/tex]
So the displacement is 1.5 meters
I have an uploaded image so you can understand it better hope it helps
A box is sitting stationary on a long level ramp on level ground. The coefficient of static friction is (1.0). One end of the ramp is slowly lifted higher and higher. What is the angle of the ramp with respect to the ground when the box begins slidig?
Answer:
45 degrees
Explanation:
Given that the coefficient of friction, [tex]\mu=1.0[/tex]
Let the angle of the ramp be [tex]\theta[/tex].
The gravitational force acting downward [tex]=mg[/tex]
The normal reaction by the ramp on the box, [tex]N=mg\cos\theta[/tex]
So, the maximum frictional force that can act on the box, [tex]f= \mu N[/tex]
The force along with the plane in the direction of sliding, [tex]F = mg\sin\theta[/tex]
When the box begins sliding, the F must have to overcome the frictional force,f.
So, F=f
[tex]mg\sin\theta=\mu N \\\\mg\sin\theta=\mu mg\cos\theta \\\\\frac {\sin\theta}{\cos\theta}=\mu \\\\\tan\theta=\mu \\\\\theta=\tan^{-1}\mu \\\\[/tex]
Putting the value of \mu, we have
[tex]\theta=\tan^{-1}1[/tex]
[tex]\theta=45[/tex] degrees.
Hence, the angle of the ramp with respect to the ground when the box begins sliding is 45 degrees.
is a tree a living or non living thing?
Answer:
Living thing
Explanation:
Nonliving things do not move by themselves, grow, or reproduce.
Answer:
Living
Explanation:
Unless you cut the tree, making that thang dead- its living
PLS HELP BEING TIMED!!!
Which equation represents the law of conservation of energy in a closed system?
KEi + PEi = KEf + PEf
PEi + PEf = KEi + KEf
KEi – KEf = PEi – PEf
KEi – PEf = PEi – KEf
Answer:
[tex]K_{i}+U_{g,i} = K_{f}+U_{g,f}[/tex]
Explanation:
A closed system is a system where exists energy interactions with surroundings, but not mass interactions. If we neglect any energy interactions from boundary work, heat, electricity, magnetism and nuclear phenomena and assume that process occurs at steady state and all effects from non-conservative forces can be neglected, then the equation of energy conservation is reduce to this form:
[tex]\Delta K +\Delta U_{g} = 0[/tex] (1)
Where:
[tex]\Delta K[/tex] - Change in kinetic energy of the system, measured in joules.
[tex]\Delta U_{g}[/tex] - Change in gravitational potential energy of the system, measured in joules.
If we know that [tex]\Delta K=K_{i}-K_{f}[/tex] and [tex]\Delta U_{g} = U_{g,i}-U_{g,f}[/tex], then we get the following equation:
[tex]K_{i}+U_{g,i} = K_{f}+U_{g,f}[/tex] (2)
Where [tex]i[/tex] and [tex]f[/tex] stands for initial and final states of each energy component.
Hence, the right answer is [tex]K_{i}+U_{g,i} = K_{f}+U_{g,f}[/tex]
Answer:
KEi + PEi = KEf + PEf
Explanation
right on edge 2020
A particle with mass of 200 kg is acted on by a net force of 4.5N. The acceleration of the particle is most nearly
Why might it be important to know your inherited traits passed down by your parents?
Answer:
health factors that could harm you or your offspring
Which of the following would be an example of mechanical energy?
Elastic Energy, Kinetic Energy, Gravitational Potential Energy
Gravitational Potential Energy, Thermal Energy
Electric Potential Energy, Nuclear Energy, Kinetic Energy
Magnetic Energy, Elastic Potential Energy
Answer:
A) Elastic Energy, Kinetic Energy, and Gravitational Potential Energy
Explanation:
Hope this helps!
How much power will it take to move a 10 kg mass at an acceleration of 2 m/s² a distance of 10 meters in 5 seconds?
Answer:
100 Watts
Explanation:
These equations are needed to work out the answer:
power= work done/ time takenwork done= force* distanceforce= mass* accelerationforce: 10 kg* 2m/s= 20
work done: 20* 10m=200
power: 200/2=100
The chimney of an oil lamp cracks when touched with rhe brade of cold knife?why
Answer:
The extreme difference between the hot chimney and the cold knife makes the chimney expand and contract so quickly it cracks.
Explanation:
Hope this helped!
Answer:
When a blade of cold knife is touched to hot glass chimney there is a sudden drop of temperature on the spot where the blade touches. As a result it cracks.
Explanation:
When a blade of cold knife is touched to hot glass chimney there is a sudden drop of temperature on the spot where the blade touches. This decrease in temperature makes the glass to contract. The stress developed on the site of contraction is responsible for the cracking of the glass chimney.