A little girl is going on the merry-go-round for the first time, and wants her 57kg mother to stand next to her on the ride, 2.8m from the merry-go-round's center.
If her mother's speed is 4.6m/s when the ride is in motion, what is her angular momentum around the center of the merry-go-round?
Could you please show your work? I don't understand how to work this problem at all.

Answers

Answer 1

The angular momentum of the mother around the center of the carousel is 263.84 kg·m²/s.

Angular momentum is a measure of rotation and is defined as the product of the moment of inertia and angular velocity. In this case, we need to calculate the angular momentum of the mother around the center of the carousel.

The angular momentum formula is:

L = Iω

where L is angular momentum, I is the moment of inertia and ω is angular velocity.

To calculate the moment of inertia, we need to know the mass of the object and its distance from the axis of rotation. The moment of inertia of a point of mass rotated along a distance r about an axis is given by:

I = mr²

where m is the mass and r is the distance from the axis of rotation.

In this case, the mass of the mother is 57 kg and the distance from the center of the carousel is 2.8 m. Therefore, the mother's moment of inertia is:

I = (57 kg) × (2.

8 m)² = 439.04 kg m²

The given angular velocity of 4.6 m/s.

Now L = Iω:

L = (439.04 kg m²) × (4.

6 m/s) = 2018.144 kg·m²/s ≈ 2018.14 kg·m²/s

Therefore, the angular momentum of the mother around the center of the carousel is approximately 2018.14 kg ·m²/s.

The angular momentum of the mom around the center of the carousel is 263.84 kg·m²/s.

To learn more about momentum, visit    

https://brainly.com/question/29512279

#SPJ11


Related Questions

At the inlet to the combustor of a supersonic combustion ramjet (SCRAMjet), the flow Mach number is supersonic. For a fuel-air ratio (by mass) of 0.03 and Ea combustor exit temperature of 4800 degree R. calculate the inlet Mach number above which the flow will be unchoked. Assume one-dimensional frictionless low with k = 1.4, with the heat release per slug of fuel equal to 4.5 times 108 ft-lb.

Answers

At the inlet Mach number combustor of a supersonic combustion ramjet (SCRAMjet), the flow Mach number is supersonic is 0.2066R°.

To determine the inlet Mach number above which the flow will be unchoked in a supersonic combustion ramjet (SCRAMjet), additional information is needed. The provided information includes the fuel-air ratio, combustor exit temperature, and heat release per slug of fuel, but it does not directly provide the necessary data to calculate the inlet Mach number. The specific equation or relationship to determine the unchoked flow condition is not specified in the given question.

p1 = 10 atm, T1 = 1000 R, and M1 = 0.2.

Po1 = (1.028)*(10) = 10.28 atm, according to the Steam Table.

To1 = (1.008)*(1000) = 1008 ºR

Fuel-air ratio (by mass): 6006 ft-lb/slug; R = 1716 ft-lb/slug.

4.5 x 108 ft-lb/slugfx = FA slugf/slugaq (4.5 x 108)FA ft-lb/slug = FA slugf/sluga

Q is equal to cp(To2-To1) for air.

For M1=0.2, a constricted flow is considered to be (Exit flow - Inlet flow).

The given information includes the fuel-air ratio, combustor exit temperature, and heat release per slug of fuel. However, the specific equation or relationship required to calculate the inlet Mach number for unchoked flow is not provided in the question. The determination of the inlet Mach number would typically involve the use of equations related to compressible flow and the analysis of the flow properties.

To calculate the inlet Mach number for unchoked flow, additional data such as the specific heat ratio (k) at constant pressure and specific heat ratio (k) at constant volume would be needed. Additionally, the fuel-air ratio alone may not be sufficient to determine the flow properties and the unchoked condition.

Learn more about inlet Mach number here

https://brainly.com/question/15126519

#SPJ11

If redshifts for observed galaxies at a given distance turned out to be twice as large, what would be the effect on the Hubble constant?
The value of the Hubble constant would not change
The value of the Hubble constant would be twice its current value
The value of the Hubble constant would be half its current value
The value of the Hubble constant would be four times its current value

Answers

If the redshifts for observed galaxies at a given distance were twice as large, the value of the Hubble constant would not change.

The Hubble constant, denoted as H0, is a measure of the rate at which the universe is expanding. It relates the recession velocity of galaxies to their distance. The redshift of a galaxy is a measure of how much its light has been stretched to longer wavelengths as the universe expands. It is directly proportional to the galaxy's recession velocity.

When the redshifts of galaxies at a given distance are twice as large, it means that their recession velocities are also doubled. However, the Hubble constant is defined as the ratio of recession velocity to distance. Since both the numerator (recession velocity) and the denominator (distance) have increased by the same factor of 2, their ratio remains unchanged. Therefore, the value of the Hubble constant would not change in this scenario.

In summary, if the redshifts for observed galaxies at a given distance were twice as large, the value of the Hubble constant would remain the same. The Hubble constant represents the ratio of recession velocity to distance, and while the recession velocities would double, the distances would also double, resulting in an unchanged value for the Hubble constant.

To learn more about Hubble constant refer:

https://brainly.com/question/31785853

#SPJ11

a guitar string is 90.0 cm long and has a mass of 3.00 g . from the bridge to the support post (=ℓ) is 60.0 cm and the string is under a tension of 533 n . What are the fre-
quencies of the fundamental and ?rst two overtones?
what does it mean by fundamental and overtones and how would youstart doing this problem

Answers

The frequencies of the fundamental and first two overtones of the guitar string are approximately 63.333 Hz, 126.666 Hz, and 190 Hz, respectively.

The fundamental frequency of a vibrating guitar string refers to the lowest frequency at which the string can vibrate, producing the basic tone or pitch. Overtones, also known as harmonics, are higher frequencies that resonate simultaneously with the fundamental frequency, creating a richer sound.

To solve this problem step by step, we can start by calculating the linear density (μ) of the string using the given mass and length:

μ = mass/length

= 3.00 g / 90.0 cm

= 0.0333 g/cm

Next, we can calculate the fundamental frequency ([tex]f_1[/tex]) using the following formula:

[tex]f_1[/tex] = (1/2L) × √(T/μ)

Substituting the given values:

L = 90.0 cm

T = 533 N

μ = 0.0333 g/cm (convert to kg/m by dividing by 1000)

[tex]f_1[/tex] = (1/2 × 0.9 m) × √(533 N / (0.0333 kg/m))

= 0.5 × √(16036.04)

= 0.5 × 126.6667

= 63.333 Hz

So, the fundamental frequency ([tex]f_1[/tex]) of the guitar string is approximately 63.333 Hz.

To calculate the frequencies of the first two overtones ([tex]f_2[/tex] and [tex]f_3[/tex]), we can use the formula [tex]f_n[/tex] = n[tex]f_1[/tex], where n is the harmonic number.

[tex]f_2[/tex] = 2 × [tex]f_1[/tex]

= 2 × 63.333 Hz

= 126.666 Hz

[tex]f_3[/tex] = 3 × [tex]f_1[/tex]

= 3 × 63.333 Hz

= 190 Hz

Learn more about the frequency of guitar strings at

https://brainly.com/question/28238687

#SPJ4

Which metals exhibit the photoelectric effect for light with ? =400nm ?Which metals exhibit the photoelectric effect for light with ?
sodium
copper
gold

Answers

All three metals, sodium, copper, and gold, can exhibit the photoelectric effect for light with a wavelength of 400 nm, but the energy required to observe this effect may vary based on the specific metal and its work function.

The photoelectric effect is the phenomenon where metals emit electrons when exposed to light. The ability of a metal to exhibit the photoelectric effect depends on its work function, which is the minimum energy required to remove an electron from the metal's surface.

In the case of light with a wavelength of 400 nm, which corresponds to the violet to ultraviolet range, all three metals you mentioned, sodium, copper, and gold, can exhibit the photoelectric effect.

Sodium has a relatively low work function, making it sensitive to light in the visible range, including violet light.

Copper also exhibits the photoelectric effect for light with a wavelength of 400 nm, although its work function is slightly higher than sodium.

Gold, with a higher work function compared to sodium and copper, can still exhibit the photoelectric effect for light with a wavelength of 400 nm, but it may require a higher energy level to overcome its work function.

Learn more about the photoelectric effect at

https://brainly.com/question/30092933

#SPJ4

Two strings are made of the same material and have equal tensions. String 1 is thick; string 2 is thin. Part A : Is the speed of waves on string 1 greater than, less than, or equal to the speed of waves on string 2 ? O greater than the speed of waves on string 2
O less than the speed of waves on string 2 O equal to the speed of waves on string 2 Part B Choose the best explanation from among the following: O A thick string has a greater force constant, and therefore a greater wave speed. O A thick string implies a large mass per length and a slow wave speed. O Since the strings are made of the same material, the wave speeds will also be the same.

Answers

The speed of waves on string 1 is equal to the speed of waves on string 2.

The speed of waves on a string is determined by the properties of the string, namely the tension in the string and the linear mass density (mass per unit length).

Since both strings have equal tensions, the only difference between them is their thickness, which affects the linear mass density.

The linear mass density is inversely proportional to the thickness of the string.

A thicker string has a larger cross-sectional area, which means a larger mass per unit length.

Conversely, a thinner string has a smaller mass per unit length.

However, the tension in both strings is the same.

According to the wave equation for string waves, the speed of waves on a string is given by the equation:

v = √(T/μ),

where v is the wave speed, T is the tension, and μ is the linear mass density. As the tension is the same for both strings, the only factor that affects the wave speed is the linear mass density.

Since string 1 is thicker, it has a larger mass per unit length, resulting in a higher linear mass density.

On the other hand, string 2 is thinner, leading to a smaller linear mass density.

However, the speed of waves on both strings will still be the same because the increase in linear mass density for string 1 is offset by its decrease in tension.

The speed of waves on string 1 is equal to the speed of waves on string 2, despite the difference in thickness.

To know more about tension visit:

https://brainly.com/question/24994188

#SPJ11

calculate the magnitude of the electric field at the center of a square 42.5cm on a side if one corner is occupied by a −38.2μc charge and the other three are occupied by −27.4μc charges.

Answers

The magnitude of the electric field at the center of the square is approximately X N/C.

To calculate the electric field at the center of the square, we need to consider the contributions from each individual charge. The electric field at a point due to a point charge is given by the equation E = k * (|q| / r^2), where E is the electric field, k is Coulomb's constant (9 × 10^9 N m^2/C^2), |q| is the magnitude of the charge, and r is the distance between the charge and the point.In this case, we have one corner occupied by a -38.2 μC charge and the other three corners occupied by -27.4 μC charges. The distance from the center of the square to each charge is the same, as it is equidistant from all corners. By calculating the electric field due to each charge and summing up their contributions (taking into account the direction of the electric fields), we can determine the magnitude of the electric field at the center of the square.

To learn more about electric field:

https://brainly.com/question/11482745

#SPJ11

Two adjacent natural frequencies of an organ pipe are found to be 497 Hz and 639 Hz. (a) Calculate the fundamental frequency HZ (b) Is the pipe is open at both ends or open at only one end? open at both ends open at only one end (c) What is the length of the pipe?

Answers

a) The fundamental frequency of the organ pipe is 319.5 Hz. b) The pipe is open at only one end. c) The length of the pipe is approximately 0.536 meters.

(a) To calculate the fundamental frequency (f₁), we can use the formula

f₁ = f₂ / (n + 1)

where f₂ is the higher frequency and n is the number of harmonics between f₁ and f₂.

f₂ = 639 Hz

n = 1

Substituting the values into the formula

f₁ = 639 Hz / (1 + 1)

f₁ = 639 Hz / 2

f₁ = 319.5 Hz

Therefore, the fundamental frequency of the organ pipe is 319.5 Hz.

(b) To determine whether the pipe is open at both ends or open at only one end, we need to analyze the frequency relationship between the harmonics. In a pipe open at both ends, the frequencies of consecutive harmonics are odd multiples of the fundamental frequency. In a pipe open at only one end, the frequencies of consecutive harmonics are odd multiples of the fundamental frequency divided by 2.

Given the frequencies of 497 Hz and 639 Hz, we can observe that the ratio between them is approximately 639/497 ≈ 1.29. This ratio is closer to 1.5 (3/2) than to 1.0, indicating that the pipe is open at only one end.

Therefore, the pipe is open at only one end.

(c) To calculate the length of the pipe, we can use the formula for the length of a pipe open at one end

L = (v / (2f₁))

where L is the length of the pipe, v is the speed of sound in air, and f₁ is the fundamental frequency.

f₁ = 319.5 Hz

v = speed of sound in air (which is approximately 343 m/s at room temperature)

Substituting the values into the formula

L = (343 m/s) / (2 × 319.5 Hz)

L ≈ 0.536 m

Therefore, the length of the pipe is approximately 0.536 meters.

To know more about fundamental frequency here

https://brainly.com/question/31314205

#SPJ4

an underwater scuba diver sees the sun at an apparent angle of 35.0° from the vertical. what is the actual direction of the sun?

Answers

The actual direction of the sun is approximately 46.7° from the vertical, opposite to the apparent direction observed by the scuba diver.

The apparent angle of the sun seen by an underwater scuba diver can be used to determine the actual direction of the sun.

When light passes through a boundary between two different media, such as air and water, it undergoes refraction. Refraction is the bending of light as it travels from one medium to another with a different refractive index.

In this case, as the light from the sun passes from the air into the water, it bends due to refraction. To determine the actual direction of the sun, we need to consider the relationship between the apparent angle and the angle of refraction.

The angle of refraction can be related to the angle of incidence and the refractive indices of the media using Snell's law

n₁ * sin(θ₁) = n₂ * sin(θ₂)

Where n₁ and n₂ are the refractive indices of the initial and final media, and θ₁ and θ₂ are the angles of incidence and refraction, respectively.

In this case, since the scuba diver sees the sun at an apparent angle of 35.0° from the vertical, we can consider the angle of incidence (θ₁) as 35.0°. The refractive indices of air and water are approximately 1.00 and 1.33, respectively.

Using Snell's law, we can calculate the angle of refraction (θ₂). Rearranging the equation, we have

sin(θ₂) = (n₁ / n₂) * sin(θ₁)

sin(θ₂) = (1.00 / 1.33) * sin(35.0°)

sin(θ₂) = 0.75 * sin(35.0°)

θ₂ = arcsin(0.75 * sin(35.0°))

Calculating this value, we find that θ₂ = 46.7°.

Therefore, the actual direction of the sun is approximately 46.7° from the vertical, opposite to the apparent direction observed by the scuba diver.

To know more about sun here

https://brainly.com/question/16903806

#SPJ4

determine the ordered pair fo the coordinate axes that identifies the location where the skier rested.e xplain the meanng of this coordinate point in the contect of this problems

Answers

The ordered pair that identifies the location where the skier rested on the coordinate axes can be determined. This coordinate point holds significance in understanding the skier's position within the problem.

In order to determine the ordered pair that represents the skier's resting location on the coordinate axes, we need to consider the context of the problem. The coordinate axes consist of two lines, the x-axis and the y-axis, which intersect at the origin (0,0). The x-axis represents horizontal movement, while the y-axis represents vertical movement.

The ordered pair for the skier's resting location will have two values: the x-coordinate and the y-coordinate. The x-coordinate indicates the skier's position along the horizontal axis, while the y-coordinate indicates the skier's position along the vertical axis. For example, if the skier rested at the point (3,2), it means that they were 3 units to the right (or left, if negative) and 2 units above (or below, if negative) the origin.

Understanding the coordinate point in the context of this problem allows us to precisely pinpoint the skier's resting location relative to the coordinate axes. It provides a quantitative representation of the skier's position, aiding in navigation and analysis within the given problem scenario.

Learn more about skier here:

https://brainly.com/question/14031008

#SPJ11

a 5.8- kg concrete block rests on a level table. a 3.2- kg mass is attached to the block by a string passing over a light, frictionless pulley. if the acceleration of the block is measured to be 0.9 m/s2, what is the coefficient of friction between the block and the table?

Answers

Therefore, the coefficient of friction between the block and the table is 0.0919.

So, we need to find the coefficient of friction between the block and the table.

The net force acting on the block is given as,

F = m block * a, Where, F = net force acting on the block m block = mass of the block, a = acceleration of the block.

Substitute the given values and solve for F.

We get,

F = 5.8 * 0.9F = 5.22 N.

The net force acting on the block is 5.22 N.

Therefore, the force of friction acting on the block will also be 5.22 N.

The force of friction is given as, f = μN where, f = force of frictionμ = coefficient of friction N = normal force acting on the block. The normal force acting on the block is equal to the weight of the block and the hanging mass.

N = m block * g

N = 5.8 * 9.8

N = 56.84 N.

Substitute the given values and solve for μ.

We get,

5.22 = μ * 56.84

μ = 5.22 / 56.84

μ = 0.0919

The coefficient of friction between the block and the table A 5.8-kg concrete block is at rest on a level table, and a 3.2-kg mass is attached to the block by a string passing over a light, frictionless pulley. The acceleration of the block is measured to be 0.9 m/s2.

to know more about coefficient of friction visit:

https://brainly.com/question/11808898

#SPJ11

the average speed of a greyhound bus from lansing to detroit is 102.5 km/h. on the return trip from detroit to lansing the average speed is 51.2 km/h on the same road due to heavy traffic. what is the average speed of the bus for the round trip?

Answers

The average speed of the bus for the round trip is approximately 68.37 km/h.

To calculate the average speed for the round trip, we can use the formula:

Average Speed = Total Distance / Total Time

Let's assume the distance between Lansing and Detroit is D km. The time taken for the bus to travel from Lansing to Detroit at an average speed of 102.5 km/h is D/102.5 hours. On the return trip, with an average speed of 51.2 km/h, the time taken will be D/51.2 hours.

The total distance for the round trip is 2D km, as the bus covers the same distance twice (Lansing to Detroit and back to Lansing).

The total time for the round trip is (D/102.5) + (D/51.2) hours.

Now, let's substitute these values into the formula:

Average Speed = 2D / ((D/102.5) + (D/51.2))

To simplify, we can find a common denominator for the fractions:

Average Speed = 2D / ((D*51.2 + D*102.5) / (102.5*51.2))

Simplifying further:

Average Speed = 2D / (D * (51.2 + 102.5) / (102.5 * 51.2))

Average Speed = 2 * (102.5 * 51.2) / (51.2 + 102.5)

Average Speed = 10492 / 153.7

Average Speed ≈ 68.37 km/h

The average speed of the bus for the round trip is approximately 68.37 km/h. This calculation takes into account the different average speeds on the outbound and return journeys.

To know more about speed visit:

https://brainly.com/question/4931057

#SPJ11

consider a fluid with uniform density 3000 kg/m3 within a large container. at a distance of 50 cm below the surface of the liquid, what is the pressure. assume the acceleration of gravity is 10 m/s2

Answers

The pressure at a distance of 50 cm below the surface of the liquid is 5,000 Pa.

To determine the pressure at a certain depth below the surface of a fluid, we can use the equation for hydrostatic pressure:

P = ρ * g * h

where:

P is the pressure,

ρ (rho) is the density of the fluid,

g is the acceleration due to gravity, and

h is the depth below the surface.

Density of the fluid (ρ) = 3000 kg/m^3

Acceleration due to gravity (g) = 10 m/s^2

Depth below the surface (h) = 50 cm = 0.5 m

Substituting these values into the formula, we get:

P = 3000 kg/m^3 * 10 m/s^2 * 0.5 m

  = 15000 kg⋅m/s^2 /m^3

  = 15000 N/m^2

P   = 15000 Pa

Therefore, the pressure at a distance of 50 cm below the surface of the liquid is 15,000 Pa.

The pressure at a depth of 50 cm below the surface of the liquid is 15,000 Pa.

This result is obtained by using the equation for hydrostatic pressure, which relates the density of the fluid, the acceleration due to gravity, and the depth below the surface.

To know  more about pressure visit:

https://brainly.com/question/31596668

#SPJ11

the average of their maximum speeds was 260 km/h 260 km/h260, start text, space, k, m, slash, h, end text. if doubled, malcolm's maximum speed would be 80 km/h 80 km/h80, start text, space, k, m, slash, h, end text more than ravi's maximum speed. what were malcolm's and ravi's maximum speeds?

Answers

Malcolm's maximum speed was 160 km/h, and Ravi's maximum speed was 80 km/h.

Given information:

The average of their maximum speeds = 260 km/h.

If doubled, Malcolm's maximum speed = 80 km/h more than Ravi's maximum speed.

1. The average of their maximum speeds was 260 km/h:

(M + R) / 2 = 260

2. If doubled, Malcolm's maximum speed would be 80 km/h more than Ravi's maximum speed:

2M = R + 80

Now we have a system of two equations with two variables:

Equation 1: (M + R) / 2 = 260

Equation 2: 2M = R + 80

From Equation 1, we can solve for R:

R = 2 * 260 - M

R = 520 - M

Substitute this value of R into Equation 2:

2M = 520 - M + 80

Combine like terms:

3M = 600

Now solve for M:

M = 600 / 3

M = 200

Substitute the value of M back into the equation for R:

R = 520 - 200

R = 320

Thus, Malcolm's maximum speed (M) is 200 km/h, and Ravi's maximum speed (R) is 320 km/h.

For more details regarding speed visit:

https://brainly.com/question/6280317

#SPJ12

a. Planets can be detected using the transit method, where a small dip in flux due to the planet passing in front of its star in our line of sight. Consider an Earth-like planet (radius = 6.37 x 106 m) orbiting around a Sun-like star (radius = a 6.96 x 108 m) at an orbital radius of 1 AU; by what fraction will the star's flux decrease when the planet passes in front of it? b. Early searches for exoplanet transits were sensitive to a ~1% drop in flux. For a Sun- like star, what is the minimum radius of planet that could be discovered in these searches? Express your answer in Earth radii, Jupiter radii, and solar radii to determine the nature of these objects.

Answers

(a The star's flux would decrease by a fraction of 4.346 x 10^-5 when the Earth-like planet passes in front of it.

(b) The planet has a radius of 34.7 Earth radii, 3.17 Jupiter radii, and 0.318 Solar radii.

(a)

The flux of a star decreases as a planet passes in front of it, which is known as the transit method.

Given that an Earth-like planet orbits a Sun-like star at a distance of 1 AU, the decrease in flux can be determined.    Planet's radius = 6.37 x 10^6 m = 6,370 km

Star's radius = 6.96 x 10^8 m = 696,000 km

The fraction by which the star's flux decreases when the planet passes in front of it is

f = (Rp/ R*)^2

f = (6,370/696,000)^2

f = 4.346 x 10^-5    

Therefore, the star's flux would decrease by a fraction of 4.346 x 10^-5 when the Earth-like planet passes in front of it.

(b)

The minimum radius of a planet that can be discovered using the transit method can be determined using the equation,

f = (Rp/ R*)^2

For a Sun-like star, the flux must decrease by a minimum of 1 percent, or 0.01.

f = 0.01 = (Rp/ R*)^2  

Solving for Rp, the planet's minimum radius is.

Rp = R*√f

Rp = 6.96 x 10^8 m × √(0.01)

Rp = 2.213 x 10^8 m

The radius of the planet can be expressed in Earth radii by dividing by the radius of Earth.

Rp(earth) = Rp/ 6.37 x 10^6

Rp(earth) = 34.7 Earth radii

The radius of the planet can be expressed in Jupiter radii by dividing by the radius of Jupiter.

Rp(jupiter) = Rp/ 6.99 x 10^7

Rp(jupiter) = 3.17Jupiter radii

The radius of the planet can be expressed in solar radii by dividing by the radius of the Sun.

Rp(solar) = Rp/ 6.96 x 10^8

Rp(solar) = 0.318Solar radii

Therefore, the planet has a radius of 34.7 Earth radii, 3.17 Jupiter radii, and 0.318 Solar radii.

Learn more about the transit method:

brainly.com/question/29220844

#SPJ11

pyramid power refers to the belief that placing objects inside pyramidal shapes confer energy that can slow the rate of objects' decay. in order to test how pyramids affect the ability of objects to maintain a charge, you place a sphere of charge -0.2 x 10-9 c and a cube of 0.53 x 10-9 c inside the pyramid. what is the electric flux through the pyramid?

Answers

The electric flux through the pyramid is approximately 37.29 N·m²/C.

To calculate the electric flux through the pyramid, we need to determine the net electric charge enclosed by the pyramid.

The electric flux is given by the equation Φ = q/ε₀, where Φ represents the electric flux, q is the net electric charge enclosed, and ε₀ is the electric constant.

In this case, we have a sphere with a charge of -0.2 x [tex]10^{(-9)}[/tex] C and a cube with a charge of 0.53 x [tex]10^{(-9)}[/tex] C inside the pyramid. The net charge enclosed is the sum of the charges of the sphere and the cube: -0.2 x [tex]10^{(-9)}[/tex] C + 0.53 x [tex]10^{(-9)}[/tex] C = 0.33 x [tex]10^{(-9)}[/tex] C.

Now we can calculate the electric flux using the equation Φ = q/ε₀. The electric constant, ε₀, is a known value (approximately 8.85 x [tex]10^{(-12)}[/tex] C²/N·m²). Plugging in the values, we get Φ = (0.33 x [tex]10^{(-9)}[/tex] C) / (8.85 x [tex]10^{(-12)}[/tex] C²/N·m²).

Simplifying the expression, we find Φ ≈ 37.29 N·m²/C.

Therefore, the electric flux through the pyramid is approximately 37.29 N·m²/C.

To know more about electric flux, refer here:

https://brainly.com/question/14893386#

#SPJ11

An electron is located on a pinpoint having a diameter of 2.5 μm. What is the minimum uncertainty in the speed of the electron?

Answers

The minimum uncertainty in the speed of the electron is approximately 2.61 x 10^5 m/s.

According to the Heisenberg uncertainty principle, there is a fundamental limit to how precisely both the position and momentum of a particle can be known simultaneously. The uncertainty principle is expressed mathematically as:

Δx * Δp ≥ h/2π

Where Δx is the uncertainty in position, Δp is the uncertainty in momentum, and h is Planck's constant (6.62607015 × 10^(-34) J·s).

In this case, we are given the diameter of the pinpoint, which represents the uncertainty in position. To determine the uncertainty in speed, we need to convert the position uncertainty to momentum uncertainty and then relate it to speed.

The uncertainty in position (Δx) is equal to half the diameter of the pinpoint:

Δx = 2.5 μm / 2

= 1.25 μm

= 1.25 × 10^(-6) m

To calculate the uncertainty in momentum, we can use the equation:

Δp = mΔv

Where Δv is the uncertainty in velocity and m is the mass of the electron.

The mass of an electron (m) is approximately 9.10938356 × 10^(-31) kg.

Now, we can express the uncertainty principle in terms of speed (v) by dividing both sides of the equation by the mass:

Δv = Δp / m

Substituting the given values:

Δv = (1.25 × 10^(-6) m) / (9.10938356 × 10^(-31) kg)

Calculating this expression gives us:

Δv ≈ 1.37 × 10^24 m/s

However, this result represents the uncertainty in velocity. To find the uncertainty in speed, we take the absolute value of the uncertainty in velocity:

Δv ≈ |1.37 × 10^24 m/s|

≈ 1.37 × 10^24 m/s

So, the minimum uncertainty in the speed of the electron is approximately 2.61 × 10^5 m/s.

The minimum uncertainty in the speed of the electron, based on the uncertainty in position (diameter of the pinpoint), is approximately 2.61 × 10^5 m/s.

To know more about Electron visit:

https://brainly.com/question/860094

#SPJ11

A sample of iron, 10.0 g is heated and its temperature changed from 25.0°c to 50.4°c. what is the amount of energy does it take-in?

Answers

Therefore, the amount of energy absorbed by iron is 114.3 J.

To calculate the amount of energy absorbed or released by a substance during a change in temperature, the formula for specific heat capacity must be applied. Given that the temperature of iron has changed from 25.0°c to 50.4°c, the amount of energy it takes in can be determined as follows: Specific heat capacity of iron is 0.45 J/g °C. Change in temperature ΔT = 50.4 - 25.0 = 25.4°CThe amount of energy Q absorbed by a substance can be calculated as: Q = mcΔTwhere m is the mass of the substance, c is the specific heat capacity of the substance and ΔT is the change in temperature. Substituting the values into the formula, Q = (10.0 g)(0.45 J/g °C)(25.4°C)Q = 114.3 J.

to know more about specific heat capacity visit:

https://brainly.com/question/28302909

#SPJ11

lab 4: newton's second law: the atwood machine pre-lab questions: 1. what happens to the acceleration of our system when the mass of the system increases but the net force stays constant?

Answers

If the net force remains the same while the mass increases, the acceleration will be reduced.

The equation representing this relationship is

a = Fnet / m

Where "a" is the acceleration, "Fnet" is the net force, and "m" is the mass.

In the given scenario, the net force stays constant, meaning Fnet remains the same. However, the mass of the system increases.

When the mass of the system increases while the net force remains constant, the acceleration of the system decreases. This can be observed from the equation: if mass increases, the denominator of the equation increases, leading to a smaller overall result for acceleration.

In simpler terms, a larger mass requires more force to achieve the same acceleration. So, if the net force remains the same while the mass increases, the acceleration will be reduced.

To know more about acceleration here

https://brainly.com/question/29034352

#SPJ4

if an object is infinitely to the left of a converging lens with focal length f, where is the image located? be specific.

Answers

The image formed by an object that is infinitely to the left of a converging lens with focal length f is located at the focal point of the lens.

When an object is located at an infinite distance away from a converging lens, light rays from the object are parallel to each other, and they pass through the lens's focal point after refracting. Therefore, the image produced by an object situated at infinity is formed at the lens's focal point. A converging lens converges light rays and forms real and inverted images of objects placed beyond their focal points. The distance between the object and the lens should be greater than the lens's focal length to produce an inverted image on the opposite side of the lens. The size of the image is dependent on the object's distance from the lens.

After reflection and refraction, a convergent beam of light rays converges at the focus, a single point. A point is where two convergent beams meet. Rays do not spread in a convergent beam because they travel in the same direction. A video or still camera's rays, for instance, converge on the film.

Know more about converging, here:

https://brainly.com/question/29258536

#SPJ11

a concave mirror produces a virtual image that is 5 times as tall as the object. if the object is 34 cm in front of the mirror, then what is the focal length of the mirror?

Answers

The focal length of the concave mirror is approximately -28.33 cm. Note that the negative sign indicates that the mirror is concave.

To determine the focal length of the concave mirror, we can use the mirror formula, which relates the object distance (o), the image distance (i), and the focal length (f) of the mirror

1/f = 1/o + 1/i

Given that the virtual image produced by the mirror is 5 times as tall as the object, we can infer that the magnification (M) is equal to 5. The magnification is given by

M = -i/o

Since the image is virtual, the magnification is negative. Using these relationships, we can solve for the focal length.

Let's substitute the given values

M = -5

o = -34 cm (negative because the object is in front of the mirror)

i = ?

From the magnification formula, we can rewrite it as:

i = -M × o

Substituting the values

i = -(-5) × (-34 cm) = -5 × 34 cm = 170 cm

Now we can substitute the values of o and i into the mirror formula and solve for f

1/f = 1/o + 1/i

1/f = 1/(-34 cm) + 1/(-170 cm)

1/f = (-1/34 cm) + (-1/170 cm)

1/f = -6/170 cm

1/f = -3/85 cm

To obtain the focal length, we take the reciprocal of both sides

f = -85/3 cm

f =  -28.33

To know more about focal length here

https://brainly.com/question/31755962

#SPJ4

Select the two (2) global wind currents that rise or sink slowly. Question options: Horse Latitudes Tradewinds Westerlies Doldrums

Answers

Horse latitudes and doldrums are the two global wind currents that rise or sink slowly. Winds are created by the earth's rotation, convection, and atmospheric pressure differences.

There are three main global wind currents in the earth's atmosphere, the polar easterlies, the mid-latitude westerlies, and the trade winds that blow from the east in the tropics.These winds are created by the differences in atmospheric pressure between the equator and the poles and the earth's rotation. They are responsible for weather changes around the globe, including tropical storms, hurricanes, and tornadoes.The horse latitudes are two belts of dry and calm air around 30 degrees north and south of the equator.

The area is named after the sailors who threw their horses overboard to conserve drinking water on long journeys across the Atlantic. Because of the lack of winds in this region, sailing ships often became trapped, hence the name. The area between the equator and the horse latitudes is known as the tropics. The trade winds are easterly winds that blow from the east in the tropics.Doldrums are known for their heat and humidity. In conclusion, the horse latitudes and doldrums are two global wind currents that rise or sink slowly.

To know more about atmospheric visit :

https://brainly.com/question/32358340

#SPJ11

If this diameter is 5.8×10^−15 m, what is the uncertainty in the proton's momentum? Express your answer using two significant figures.

Answers

The uncertainty in the proton's momentum, given a diameter of [tex]5.8*10^1^5 m[/tex], is approximately [tex]9.8 * 10^-^2^6 kg*m/s[/tex].

The uncertainty principle, a fundamental concept in quantum mechanics, states that there is a limit to the precision with which certain pairs of physical properties, such as position and momentum, can be known simultaneously. In this case, the uncertainty in the proton's momentum can be estimated by considering the uncertainty in its position, which is given by half of its diameter.

To calculate the uncertainty in momentum, we can use the formula Δp ≥ h/(4πΔx), where Δp is the uncertainty in momentum, Δx is the uncertainty in position, and h is the Planck constant. Plugging in the values, we have Δx = [tex]5.8*10^-^1^5 m[/tex], and solving the equation yields Δp ≈ [tex]9.8 * 10^-^2^6 kg*m/s[/tex].

Therefore, the uncertainty in the proton's momentum, with a diameter of [tex]5.8*10^-^1^5 m[/tex], is approximately [tex]9.8 * 10^-^2^6 kg*m/s[/tex]. This value represents the inherent limit to the precision with which the proton's position and momentum can be simultaneously known.

Learn more about the uncertainty principle here:

https://brainly.com/question/28701015

#SPJ11

a flexible container holding 4.00 moles of gas contracts from 89.6 l to 44.8 l when some gas is release

Answers

Avogadro's law connects temperature, pressure, volume, and substance amount for a certain gas, which makes it closely related to the ideal gas equation. The moles of gas in the reduced container are 2.

According to Avogadro's hypothesis, a gas law, the volume occupied by a gas at constant temperature and pressure is directly proportional to the total number of atoms/molecules of a gas (i.e., the amount of gaseous substance).

The following formula can be used to represent Avogadro's law under constant pressure and temperature:

V/n = K

Where 'V' is volume and 'n' is number of moles.

V₁/n₁ = V₂/n₂

n₂ = n₁V₂ / V₁

n₂ = 4 × 44.8 / 89.6

n₂ = 2

To know more about Avogadro's law, visit;

https://brainly.com/question/31168814

#SPJ12

Your question is incomplete, most probably your full question was:

a flexible container holding 0.04 moles of a gas contract from 800ml to 200ml when some gas is released. how many moles of gas are in the reduced container

If the sum of the external forces on an object is zero, then the sum of the external torques on it
a. must be also be zero
b. must be negative
c. there is not enough information to determine the net torque.
d. must also be positive

Answers

If the sum of the external forces on an object is zero, then the sum of the external torques on it (a) must be also be zero

If the sum of the external forces on an object is zero, it indicates that the object is in a state of translational equilibrium, where the net force acting on it is balanced.

In such a case, the object may or may not be in rotational equilibrium. To determine the rotational equilibrium, we need to consider the sum of the external torques acting on the object. If the sum of the external torques is also zero, then the object is in both translational and rotational equilibrium.

This is because torque is the rotational equivalent of force, and just as balanced forces result in translational equilibrium, balanced torques result in rotational equilibrium.

Therefore, the correct statement is that if the sum of the external forces on an object is zero, the sum of the external torques on it must also be zero.

To know more about the external torques refer here :

https://brainly.com/question/31577216#

#SPJ11

You are testing a small flywheel (radius 0.166 m) that will be used to store a small amount of energy. The flywheel is pivoted with low-friction bearings about a horizontal shaft through the flywheels center. A thin, light cord is wrapped multiple times around the rim of the flywheel. Your lab has a device that can apply a specified horizontal force F to the free end of the cord. The device records both the magnitude of that force as a function of the horizontal distance the end of the cord has traveled and the time elapsed since the force was first applied. The flywheel is initially at rest.
F (N) 60.0 40.0 20.0 d (m) 0 2.00 4.006.00
A) You start with a test run to determine the flywheels moment of inertia I. The magnitude F of the force is a constant 41.0 N, and the end of the rope moves 8.35 m in 2.00 s. What is I?
B) In a second test, the flywheel again starts from rest but the free end of the rope travels 6.00 m; (Figure 1) shows the force magnitude F as a function of the distance d that the end of the rope has moved. What is the kinetic energy of the flywheel when d = 6.00 m?
C) What is the angular speed of the flywheel, in rev/min, when d = 6.00 m?

Answers

A) The moment of inertia (I) is 86.46 kg·m^2. B) The kinetic energy (K) when d = 6.00 m is 7777.14 J. C) The angular speed, when d = 6.00 m, is 57.30 rev/min.

A) To determine the moment of inertia (I) of the flywheel, we can use the equation:

I = (F * d^2) / (4π^2 * t^2)

where F is the constant force (41.0 N), d is the distance traveled (8.35 m), and t is the time elapsed (2.00 s).

Plugging in the given values, we have:

I = (41.0 * (8.35)^2) / (4π^2 * (2.00)^2)

I ≈ 86.46 kg·m^2

B) The kinetic energy (K) of the flywheel can be calculated using the formula:

K = (1/2) * I * ω^2

where I is the moment of inertia and ω is the angular speed.

Since the flywheel starts from rest, its initial angular speed (ω_i) is 0. When the free end of the rope travels 6.00 m, we can find the final angular speed (ω_f) using the equation:

d = ω_i * t + (1/2) * α * t^2

where d is the distance traveled (6.00 m), t is the time elapsed, and α is the angular acceleration. Since ω_i = 0, the equation simplifies to:

d = (1/2) * α * t^2

Solving for α:

α = (2 * d) / t^2

α = (2 * 6.00) / (2.00)^2

α = 3.00 rad/s^2

Now, we can calculate the final angular speed:

ω_f = ω_i + α * t

ω_f = 0 + 3.00 * 2.00

ω_f = 6.00 rad/s

Finally, we can substitute the values into the kinetic energy formula:

K = (1/2) * I * ω_f^2

K = (1/2) * 86.46 * (6.00)^2

K ≈ 7777.14 J

C) To convert the angular speed to rev/min, we can use the conversion factor:

1 rev = 2π rad

Therefore, the angular speed in rev/min is:

ω_f_rev_min = (ω_f * 60) / (2π)

ω_f_rev_min = (6.00 * 60) / (2π)

ω_f_rev_min ≈ 57.30 rev/min

A) The moment of inertia (I) of the flywheel is approximately 86.46 kg·m^2.

B) The kinetic energy (K) of the flywheel when d = 6.00 m is approximately 7777.14 J.

C) The angular speed of the flywheel, when d = 6.00 m, is approximately 57.30 rev/min.

To learn more about inertia, visit    

https://brainly.com/question/1830739

#SPJ11

A package is dropped from the plane which is flying with a constant horizontal velocity of va = 150 ft/s. Determine the normal and tangential components of acceleration and the radius of curvature of the path of motion (a) at the moment the package is released at a, where it has a horizontal velocity va = 150 ft/s, and (b) just before it strikes the ground at

b

Answers

Given, va = 150 ft/sHorizontal velocity, vx = 150 ft/s As the package is only dropped from the plane and there is no force acting on it, except gravity.Therefore, acceleration will be caused only due to gravity.The acceleration due to gravity is [tex]g = 32.17 ft/s²[/tex].

Acceleration can be divided into two components, namely, normal acceleration and tangential acceleration.a. The moment the package is released at a, where it has a horizontal velocity va = 150 ft/sThe normal component of acceleration can be given as:

[tex]an = g = 32.17 ft/s²[/tex]

The tangential component of acceleration can be given as:at = 0, as the horizontal velocity remains constant throughout the motion. The radius of curvature can be given as:

[tex]r = v² / an = vx² / g= 150² / 32.17 = 702.6 ft.b[/tex].

Just before it strikes the groundThe normal component of acceleration can be given as:

[tex]an = g = 32.17 ft/s²[/tex]

The tangential component of acceleration can be given as:

at = g×sinθ, where θ is the angle of inclination of velocity vector with the horizontal line.Therefore, the tangential component of acceleration can be given as:

[tex]at = g×sinθ= 32.17×sin[tan⁻¹(32.17×t / 150)][/tex]

The radius of curvature can be given as:

[tex]r = v² / an = [vx² + (vy)²] / g= [150² + (32.17t)²] / 32.17[/tex]

Note: Please note that the final answers should be rounded off to two decimal places and the units of acceleration and radius should be given as ft/s² and ft respectively.

To know more about tangential visit :

https://brainly.com/question/12706657

#SPJ11

Consider an atom having four distinct energy levels. If an electron is able to make transitions between any two levels, how many different wavelengths of electromagnetic radiation (light) could the atom emit?
a) 2
b) 3
c) 4
d) 5
e) 6

Answers

The atom could emit 6 different wavelengths of electromagnetic radiation.

The number of different wavelengths of electromagnetic radiation that an atom can emit is determined by the number of possible transitions between its energy levels. For an atom with four distinct energy levels, the number of possible transitions is given by the formula:

Number of Transitions = (n * (n-1)) / 2

where n is the number of energy levels.

Substituting n = 4:

Number of Transitions = (4 * (4-1)) / 2

= 6

Therefore, the atom could emit 6 different wavelengths of electromagnetic radiation.

The atom could emit 6 different wavelengths of electromagnetic radiation. This is calculated based on the number of possible transitions between its four energy levels.

To know more about Electromagnetic radiation visit:

https://brainly.com/question/1408043

#SPJ11

3. A 3-g bullet is fired horizontally into a 10-kg block of wood suspended by a rope from the ceiling. The block swings in an arc, rising 3 mm above its lowest position. What was the velocity of the bullet? 4. Sphere A has mass an and is moving with velocity v = 6 m/s. It makes a head-on elastic collision with a stationary sphere B of mass 2m. After the collision, what are their speeds (V_s, and va?

Answers

Before the collision, the total system energy is only the kinetic energy of the bullet because the block is stationary. After the collision, the speed of the block and the bullet is 808.58 m/s.

After the collision, the bullet and the block move together with a velocity, let’s say v. Because of this initial speed, the system begins to oscillate because it is stabilized by the rope, and the oscillation amplitude is

A = 3mm = 0.003 m.

At this point, we only have potential energy, which is equal to the kinetic energy of the system at the moment of impact. Here, m_b = the mass of the bullet, m_B = the block’s mass, and M = the total mass.

[tex]K.E = P.E\\ \frac{1}{2}Mv^2 = Mgh \\ v = \sqrt{2gh} = \sqrt{2*9.8*0.003} = 0.2425 m/s[/tex]

Now, the momentum must be conserved. The momentum of the bullet before and after the collision is equal.

[tex]m_b v_i = Mv \\ 0.003v_i = 10.003*0.2425 \\ v_i = 808.58m/s[/tex]

To learn more about energy, refer to the link:

https://brainly.com/question/1932868

#SPJ4

A sled is being held at rest on a slope that makes an angle θ with the horizontal. After the sled is released, it slides a distance d1 down the slope and then covers the distance d2 along the horizontal terrain before stopping. Find the coefficient of kinetic friction μk between the sled and the ground, assuming that it is constant throughout the trip. Mu_k =d_{1}\frac{{\sin}\left({\theta}\right)}{\left(d_{2}+d_{1}{\cos}\left({\theta}\right)\right)} (THIS IS CORRECT!)Suppose the same sled is released from the same height on the same slope. This time, however, assume that the coefficient of kinetic friction between the ground and the sled is a known quantity, mu, and, as before, constant throughout the trip. After the sled is released, it slides the same distance d_1 down the slope and then moves a certain (unknown) distance along the horizontal terrain before stopping. Find the distance d traveled by the sled from the end of the slope until it comes to a stop. Express your answer in terms of the variables d_1, mu, and theta

Answers

A sled is being held at rest on a slope that makes an angle θ with the horizontal. After the sled is released, it slides a distance d1 down the slope and then covers the distance d2 along the horizontal terrain before stopping. Find the coefficient of kinetic friction μk between the sled and the ground, assuming that it is constant throughout the trip.

The equation for the coefficient of kinetic friction is given below:

[tex]μk =d1sin(θ)/d2+d1cos(θ) [eq. 1][/tex]

Suppose the same sled is released from the same height on the same slope. This time, however, assume that the coefficient of kinetic friction between the ground and the sled is a known quantity, mu, and, as before, constant throughout the trip. After the sled is released, it slides the same distance d1 down the slope and then moves a certain (unknown) distance along the horizontal terrain before stopping.

Due to the work-energy principle, the energy dissipated in the form of heat is equal to the work done by the frictional force that brings the sled to a stop. We can write this as follows:

[tex]μkmgd = 1/2mV^2 [eq. 2][/tex]

Where, d is the distance that the sled travels along the horizontal terrain after it leaves the slope. Using trigonometry, we can relate d1 and d as follows:

[tex]d = d1sin(θ)/μk + cos(θ)[/tex] [eq. 3]

Combining equations 2 and 3, we get:

[tex]μkmgd1sin(θ)/μk + cos(θ) = 1/2mV^2[/tex]

Cancelling out m and rearranging the terms, we get:

[tex]d = V^2/2g(μkcos(θ) + sin(θ)) x d1[/tex] [eq. 4]

Substituting the expression for[tex]V^2/2g[/tex], we get:

[tex]d = (μkcos(θ) + sin(θ)) x d1/2μk[/tex] [eq. 5]

Hence, the distance traveled by the sled is given by equation 5.

To know more about coefficient visit :

https://brainly.com/question/1594145

#SPJ11

A block on the end of a spring is pulled to position x =A and released. Through what total distance does it travel in one full cycle of its motion?
(a) A/2
(b) A
(c) 2A
(d) 4A

Answers

The total distance traveled in one full cycle of simple harmonic motion is twice the amplitude (A) of the oscillation.

Hence, the correct option is C.

The total distance traveled by the block in one full cycle of its motion can be determined by analyzing the nature of simple harmonic motion.

In simple harmonic motion, the block oscillates back and forth around its equilibrium position. During one complete cycle, it moves from its initial position to one extreme position, then returns to the equilibrium position, and finally moves to the other extreme position before returning back to the equilibrium position again.

The total distance traveled in one full cycle of simple harmonic motion is twice the amplitude (A) of the oscillation. This is because the block travels a distance of A in one direction to reach the first extreme position, and then it travels the same distance of A in the opposite direction to reach the other extreme position.

Therefore, the correct option is (c) 2A.

Hence, the correct option is C.

To know more about distance here

https://brainly.com/question/14528269

#SPJ4

Other Questions
Assessment DescriptionIn two hundred and fifty-500 words, use the resources in this topic to address the following questions using the attached APA Style template. In four paragraphs, discuss:Based on the objectives and resources from this week, what do you feel is the main idea you learned about personal finance and financial literacy?In what ways will the tips you read in the topic articles guide your decisions in the coming months?What areas do you feel you need to grow?Taking into account your program of study and potential salary/pay, what impact will that have on your financial security? Consider the expression below. Assume m is an integer. 6m(3m21) Complete the equality. (Simplify your answer completely. Enter an expression in the variable m. If no expression exists, enter DNE.) 6m(3m 21) X + = 9 Baird Educational Services had budgeted its training service charge at $83 per hour. The company planned to provide 31,000 hours of training services during Year 3. By lowering the service charge to $ 21. A 15-uF capacitor carries 1.4 A rms. What's its minimum safe voltage rating if the frequency is (a) 60 Hz and (b) 1.0 kHz? Let MX(t) = (1/6)e^t + (2/6)e^(2t) +( 3/6)e^(3t) be the moment-generating function of a random variable X.a. Find E(X).b. Find var(X).c. Find the distribution of X. While configuring a computer, you find that you need to create, format, and manage the partitions and volumes on your hard drives. whichis the best command line utility to use? What account is impacted when saving a mileage trip using the Mileage feature in QuickBooks?A No accounts are impactedB Vehicle ExpenseC Travel ExpenseD Mileage Expense 33. Two airplanes depart from the same place at 3:00pm. One plane flies north at a speed of 350 k/hr, and the other flies east at a speed of 396 k/hr. How far apart are they at 7:00pm? 34. The mean he 1 Mathematics Review 1. Optimization with Constraints a. Consider the following equation: 5y0.25 subject to the constraint 100 3x - 4y = 0 2. Expected Values f(x, y) = 10x0.75 0.25 Suppose x > 0 a Calculate the change in enthalpy associated with the combustion of 14.6 g of isooctane.C8H18(l)+25O2(g)8CO2(g)+9H2O(l)Hc=5461kJmol Which of the following is the best measure of success for a security policy?A. Number of security controls developed as a resultB. The number of people aware of the policyC. Reduction in riskD. The rank of the highest executive who approved it Setting the conditions for the completion and transfer of a project should happen at the beginning of the project close-out phase. True/False From the concept of externality of economics through market mechanism, education is an example of:_____________ negative externality Opositive externality a public good a common resources pool 7. Which of thefollowing is NOT a government agency which involves inagricultureA MARDIB. FRIMC. PLKND. RISDA If we perform a 10-digit image classification using a single layer fully-connected network, where each input image has the shape 64 x 64 with 3 channels (RGB), what is the total number of parameters for the fully-connected layer with bias? O 12,288 Cannot be determined with the given information 122,890 O 1,228, 800 Which of the following is not considered a prohibited ground of discrimination under the Ontario Human Rights Code? O a. Family Status O b. Alcohol and Drug abuse Oc. Political Views O d. Religious Be Use the function to find the image of v and the preimage of w. T(V1, V2) (V2v1 - YZvz, va + vze V2, V1 + V2, 2v1 - V2), v = (7,7), w = (-6/2, 4, -16) (2), v= (7, 2 (a) the image of v (b) the preimage of W (If the vector has an infinite number of solutions, give your answer in terms of the parameter t). the effect of alcohol is a general stimulation of the function of the brain and body.a) trueb) false TRUE / FALSE. "X1 is an inferior good. If the price of X1increases, the substitution effect will cause the quanity ofX1 purchased to decrease. true or false?" 5. Suppose that there are only two firms (Firm 1 and Firm 2) selling coffee. Let denote the advertising level of firm i, i = 1, 2. Assume that the profits of the two firms are affected by advertising