A hurricane is a type of severe cyclone

The osmotic pressure of the 0.250 L solution made with 1.60 g of glucose, in water at 25.00°C is 0.869atm.

The osmotic pressure of the solution can be calculated using the following expression:

PV = nRT

where;

no of moles of glucose = 1.60g ÷ 180g/mol = 8.89 × 10-³mol

P × 0.250 = 0.00889 × 0.08206 × 298

0.25P = 0.217

P = 0.217/0.25

P = 0.869atm

Therefore, the osmotic pressure of the 0.250 L solution made with 1.60 g of glucose, in water at 25.00°C is 0.869atm.

Learn more about osmotic pressure at: https://brainly.com/question/10046758

#SPJ1

Answer:

D

Explanation:

best choice, makes the most sense

In the scientific method, conducting an experiment involves designing and performing controlled experiments to test a hypothesis and the correct option is option B.

Scientists manipulate the independent variable while controlling other variables (dependent and controlled variables) to observe and measure the effect on the dependent variable.

By controlling variables, scientists can isolate the factors that influence the outcome, ensuring that any observed changes are a result of the manipulated variable and not other unrelated factors. This step allows for the collection of reliable data, which is essential for drawing meaningful conclusions based on the evidence gathered from the experiment.

Thus, the ideal selection is option B.

Learn more about Scientific method, here:

https://brainly.com/question/17309728

#SPJ3

3.4x10^4 = 34000

3.4×104 = 3.4 ×10000 = 34×1000=34000

In linguistics, ordinal integers or ordinal digit words are terms representing place or rank in sequential ordering; the order may be of a size, significance, record, and so on (e.g., "third", "tertiary").

They vary from cardinal digits, which mean quantity (e.g., "three") and other kinds of numerals.

Thus, 34000 is the answer.

To learn more about  ordinary number click here:

https://brainly.com/question/8516015

#SPJ1

Molarity is the estimation of the solute concentration in the solution. The final molar concentration of the acetate anion in the solution is 0.006 M.

Molarity is the ratio of the moles to the volume in liters.

Given,

Mass of lead (II) acetate = 0.258 gm

Volume of solution = 0.25 L

Moles are calculated as:

Moles = mass ÷ molar mass

= 0.258 g ÷ 325.29 g/mol

= 0.00079

Molarity is calculated as:

M = moles ÷ volume

= 0.00079 ÷ 0.25

= 0.0032

The molar concentration of the acetate ions: 2 × 0.0032 = 0.0064 M

Therefore, the molarity of the acetate anion in the solution is 0.006 M.

Learn more about molarity here:

https://brainly.com/question/16850494

#SPJ1

The final temperature of the mass of gold is  737 °C.

The specific heat capacity of gold is 0.126 J/g/K

The final temperature, T2 of the gold is calculated as follows:

T2 = T + Q/mc

where;

T is initial temperature, m is mass, and c is specific heat capacity of gold.

T2 = 27 + 2.3 x 1000/(25 x 0.126)

T2 = 737 °C

Therefore, the mass and heat capacity of gold determines its final temperature.

Learn more about specific heat capacity at: https://brainly.com/question/27862577

#SPJ1

The resistance has a linear relationship with temperature because it increases as temperatures increases.

Temperature refers to the activity (motion or thermal energy) in the atoms that form molecules.

The resistance of an electric conductor increases as the temperature increases since the thermal energy of subatomic electrons also increases.

In conclusion, the resistance has a linear relationship with temperature because it increases as temperatures increases.

Learn more about resistance here:

https://brainly.com/question/1834200

#SPJ1

The correct statements about all greenhouse gases include the following:

These are gases which are found in the atmosphere and have varying effects on the energy present on earth.

Examples include carbon dioxide, methane etc and their characteristics are mentioned above.

Read more about Greenhouse gas here https://brainly.com/question/12684997

#SPJ1

The molar heat of vaporization of substance Z is 3.375 kJ/mol.

The molar heat of vaporization of substance Z is calculated as follows;

ΔH(vap) = E/n

where;

ΔH(vap) = 5.4 kJ/1.6

ΔH(vap) = 3.375 kJ/mol

Thus, the molar heat of vaporization of substance Z is 3.375 kJ/mol.

Learn more about molar heat here: https://brainly.com/question/20716582

#SPJ1

The amount of sodium azide required will be 123.72 grams

From the equation of the reaction below:

[tex]2NaN_3 --- > 2Na + 3N_2[/tex]

The mole ratio of sodium azide to nitrogen gas is 2:3

Mole of 80.0 g nitrogen = 80/28.02 = 2.855 moles

Equivalent mole of sodium azide = 2/3 x 2.855 = 1.903 moles

Mass of 1.903 moles sodium azide = 1.903 x 65 = 123.72 grams

More on stoichiometric problems can be found here: https://brainly.com/question/14465605

#SPJ1

The type of nuclear decay in which Oxygen decays to form nitrogen is beta plus decay.

A beta plus decay is a type of decay in which a proton in an element disintegrates to produce a neutron resulting in a decrease in the atomic number of the radioactive element.

In the given equation below:

Oxygen decays to form nitrogen due to a decrease in atomic number.

This is an example of beta plus decay.

In conclusion, oxygen decays to form nitrogen beta plus decay.

Learn more about beta plus decay at: https://brainly.com/question/12448836

#SPJ1

Answer: 2.88×[tex]10^{24}[/tex]atoms [tex]P_{2}O_{5}[/tex]

Explanation: First, using stoichiometry, we must convert this from grams to moles, then from moles to atoms.

1. For the first step, we should also look at the periodic table to find the molar mass of the compound, then use that as the denominator.

[tex]0.680g P_{2} O_{5} *\frac{1molP_{2} O_{5} }{141.948gP_{2} O_{5} } =4.79mol P_{2} O_{5}[/tex]

2. Now that it is converted to moles, we must convert it to atoms by multiplying it by Avogadro's number.

[tex]4.79molP_{2} O_{5} *\frac{6.022X10^{23} }{1mol} =2.88*10^{24}[/tex]

With this information, we know that there are [tex]2.88X10^{24}[/tex] total atoms in 0.680 grams [tex]P_{2} O_{5}[/tex].

I hope this helps! Pls give brainliest!! :)

Answer:

6.97 atm is the osmotic pressure.

Answer:

all of the above

Answer:

C

Explanation:

C .       specific heat =    J / gm-C

The formula units in the substances are as follows:

The moles of the substances are determined from their molar mass.

Molar mass of the substances is given as follows:

Formula units = mass/molar mass × 6.02 × 10^23

The formula units in the substances are as follows:

In conclusion, the number of formula units is derived from the moles and Avogadro number.

Learn more about formula units at: https://brainly.com/question/24529075

#SPJ1

Answer:

Explanation:

Formula

Heat = m * c * delta t

t = temperature in centigrade.

The first thing you have to do is convert kelvin degrees to centigrade. The conversion factor is - 273. The formula is degrees centigrade = degrees kelvin - 273. It is easier to understand with a couple of examples.

Solution

Heat = 100.0 grams * 4.18 J/g*C * (52 - 17)

Heat = 100 * 4.18 * 35

Heat = 14630 Joules

But you want kj

Heat = 14630 / 100 = 14.63

Answer

Heat = 14.6 kj

Answer:

Explanation:

d because a b and c is in correct

The rate constant is s-1 which is the unit of first order reaction rate constant thus the reaction is a first order reaction. Option B

The term rate of reaction refers to how fast or slow a reaction proceeds a reaction could be;

We can know the order of reaction here by looking at the unit of the rate constant. The rate constant is s-1 which is the unit of first order reaction rate constant thus the reaction is a first order reaction.

Learn more about rate of reaction:https://brainly.com/question/8592296

#SPJ1

4) 0.05 L of the stock solution must be taken.

5) The osmotic pressure would be 12.23 atm

4) Using the dilution equation: m1v1=m2v2

   m1 = 1M, m2 = 0.1M, v2 = 0.5L

      v1 = m2v2/m1 = 0.1 x 0.5/1 = 0.05 L

5) Using the formula: osmotic pressure = icRT

 Since sucrose does not ionize in water,  i = 1

  C = 0.5

  R = 0.0821

  T = 298

  Osmotic pressure = 1 x 0.5 x 0.0821 x 298 = 12.23 atm

More on osmotic pressure can be found here: https://brainly.com/question/12497098

#SPJ1

Proper cleaning and sanitizing practices are critical in preventing bacteria that can cause foodborne illness.

Benefits of sanitizing:

Eliminates Pathogens.

Sanitizing Improves Home Odor.

Reduces Respiratory issues.

Decreases Allergy Flare-Ups.

Easy to Use.

Reduces Stress.

Helps the Immune System.

When and how to clean surfaces in your home.

Important to clean and sanitize kitchen premises

Cleaning your kitchen premises and equipment ensures that clean food preparation is carried out in order to improve kitchen efficiency and reduce environmental impacts.

To learn more about cleaning refer: https://brainly.com/question/25912875

#SPJ4

Neither attract much nor allows it be free.

How the molecules behave in such way?

Because fluorine has a higher electronegativity than carbon and hydrogen, CH3F possesses a non-zero dipole moment. As a result, fluorine draws a partial negative charge whereas other atoms (such as carbon or hydrogen) draw a partial positive charge, leading to a non-zero dipole moment in CH3F. Lewis' structure, CH3F, is made up of one carbon atom, three hydrogen atoms, and one fluorine atom. Carbon is the key atom in the CH3F lewis structure because it is the least electronegative. The CH3F lewis dot structure consists of 3 lone pairs and a total of 4 bound pairs.

Properties of CH3F

Know more about carbon here:

https://brainly.com/question/3049557

#SPJ4

Answer:

An ecosystem is defined by the interactions between the living and non-living things in any given area. Abiotic factors are the non-living components of an ecosystem. These include: air water, wind, soil, temperature, sunlight. One of the most critical interactions in an ecosystem between the biotic and abiotic environment is photosynthesis , the base chemical reaction that drives most life on earth. Plants and algae use sunlight, water and carbon dioxide to create the energy they need to grow and live via photosynthesis.

There are four main types of species interactions that occur between organisms in an ecosystem:

Predation , parasitism and herbivory – In these interactions, one organism benefits while the other is negatively affected.

* Competition – Both organisms are negatively affected in some way due to their interactions.

* Commensalism – One organism benefits while the other is neither harmed nor gains.

* Mutualism – Both organisms benefit from their interactions.

Plants with bird or butterfly pollinators are good examples of mutualistic interactions. Plants benefit by having their flowers pollinated so they can reproduce.

Using Newton's second law, the car is experiencing a net force parallel to the banked curve such that

[tex]mg \sin(\theta) = \dfrac{mv^2}r \implies \sin(\theta) = \dfrac{v^2}{rg}[/tex]

where [tex]v[/tex] is the tangential speed of the car and [tex]r[/tex] is the radius of the curve. Solve for [tex]\theta[/tex] :

[tex]\sin(\theta) = \dfrac{\left(61.0\frac{\rm m}{\rm s}\right)^2}{(1860\,\mathrm m)g} \approx 0.204 \implies \theta = \sin^{-1}(0.204) \approx \boxed{11.8^\circ}[/tex]

Answer: 0.680 mol

Explanation:

From the coefficients of the equation, we know that for every 3 moles of carbon dioxide produced, 5 moles of oxygen gas are consumed.

So, the answer is (5/3)(0.408) = 0.680 mol (to 3 sf)

Lewis symbol for K+ is given by a dot and K.

Lewis symbols can be defined as a symbol the is used in describing the valence electron configurations of an atom ions.

A Lewis symbol consists of the symbol of the element and then surrounded by one dot for each of its valence electrons.

In conclusion, Lewis symbol for K+ is given by a dot and K.

Learn more about Lewis symbol: https://brainly.com/question/6605265

#SPJ1

Answer:

C. Xenon

Explanation:

The question only requires you to use your visual skills to identify the unknown gas. Look at the spectra of unknown gas and xenon, are they not identical? SInce they are same, the unknown sample must be xenon.