a) In a periodic review system, the review period (P) should be determined based on the desired cycle-service level and the characteristics of demand and lead time. The order-up-to level (T) is calculated by adding the safety stock to the average demand during the lead time.
b) In a continuous review system, the reorder point (R) is determined by considering the average demand per week, lead time, and safety stock.
a) Periodic Review System:
In a periodic review system, the company reviews and places orders at fixed intervals. To determine the values of P (review period) and T (order-up-to level), we need to consider the desired cycle-service level and the characteristics of demand and lead time.
The desired cycle-service level of 90 percent indicates that the company wants to have enough inventory to meet demand with a 90 percent probability. We can use the normal distribution and the given standard deviation of weekly demand to calculate the safety stock needed to achieve this service level.
Safety Stock = Z * √(Lead Time * Variance of Weekly Demand)
Using the z-value corresponding to a 90 percent service level (1.28), the lead time of 4 weeks, and the standard deviation of weekly demand (3 units), we can calculate the safety stock.
Once we have the safety stock, we can determine the order-up-to level (T) by adding the safety stock to the average demand during the lead time.
T = Average Demand during Lead Time + Safety Stock
b) Continuous Review System:
In a continuous review system, the company continuously monitors inventory levels and places orders when the inventory reaches a reorder point (R). The reorder point is determined based on the lead time and the desired cycle-service level.
Reorder Point (R) = Average Demand per Week * Lead Time + Safety Stock
Using the average demand per week (Demand per Year / Number of Weeks) and the same safety stock calculated in the periodic review system, we can determine the reorder point.
for more such question on review system,visit
https://brainly.com/question/29455665
#SPJ8
Note the complete questions is:
A golf specialty wholesaler operates 50 weeks per year. Management is trying to determine an inventory policy for its 1-irons, which have the following characteristics:
Demand= 2000 units/year
Demand is normally distributed
Standard deviation of weekly demand= 3 units
ordering cost= $40/order
annual holding cost (H)= $5 / units
desired cycle-service level= 90 percent
lead time= 4 weeks
If the company uses a periodic review system, what should P and T be?
If the company uses a continuous review system, what should R be?
Westgate Inc. uses a lean manufacturing strategy to manufacture DVR (digital video recorder) players. The company manufactures DVR players through a single product cell. The budgeted conversion cost for the year is $819,000 for 1,950 production hours. Each unit requires 12 minutes of cell process time. During March, 820 DVR players were manufactured in the cell. The materials cost per unit is $74. The following summary transactions took place during March:
1. Materials were purchased for March production.
2. Conversion costs were applied to production.
3. 820 DVR players were assembled and placed in finished goods.
4. 780 DVR players were sold for $280 per unit.
a. Determine the budgeted cell conversion cost per hour. If required, round to the nearest dollar. per hour
b. Determine the budgeted cell conversion cost per unit.
a. Budgeted cell conversion cost per hour Conversion costs are the direct and indirect manufacturing costs that are required to convert raw materials into finished goods. Direct costs include labor and materials, while indirect costs include facility maintenance and utilities. The budgeted cell conversion cost per hour is calculated by dividing the budgeted cell conversion cost for the year by the number of budgeted production hours. The budgeted cell conversion cost for the year is $819,000, and the number of budgeted production hours is 1,950. Therefore, the budgeted cell conversion cost per hour is $419.
b. Budgeted cell conversion cost per unit Budgeted cell conversion cost per unit is calculated by dividing the budgeted cell conversion cost per hour by the number of units produced per hour. One unit requires 12 minutes of cell process time. In an hour, there are 60 minutes. Therefore, the number of units produced per hour is 60 / 12 = 5. The budgeted cell conversion cost per hour is $419. Therefore, the budgeted cell conversion cost per unit is $419 / 5 = $83.80. Answer: a. The budgeted cell conversion cost per hour is $419.
b. The budgeted cell conversion cost per unit is $83.80.
To know more about Budgeted cell conversion visit:
https://brainly.com/question/32484389
#SPJ11
People are living longer while the number paying into Social Security is declining. The text suggests that maintaining Social Security for years to come may require reducing benefits, encouraging people to retire later, increasing social security taxes, and: ______________
a. increasing federal income taxes.
b. limiting cost-of-living adjustments.
c. placing caps on benefits for those whose income is greater than $300,000 per year.
d. receiving benefits for only 10 years.
The text suggests that in addition to reducing benefits, encouraging later retirement, and increasing Social Security taxes, another measure that may be required to maintain Social Security for years to come is limiting cost-of-living adjustments.
Cost-of-living adjustments (COLAs) are annual increases in Social Security benefits designed to help offset the effects of inflation on retirees' purchasing power. By limiting COLAs, the growth rate of benefits would be slowed down, resulting in cost savings for the Social Security system.
Limiting COLAs can be seen as a way to control the growth of Social Security expenditures without directly reducing the benefits received by retirees. It acknowledges the need for sustainability and ensures that the program remains financially viable in the face of demographic changes and increased life expectancy.
While there may be other potential measures to address the long-term sustainability of Social Security, limiting cost-of-living adjustments is one of the options that can help manage the financial challenges associated with an aging population and a declining workforce contributing to the system.
Know more about Social Security here:
https://brainly.com/question/32221263
#SPJ11
Today is t = 0. You have just bought a five-year zero-coupon Treasury bond with $1,000 face value. You paid $920.
(a) What is the annually compounded yield to maturity on the bond?
(b) Suppose that yields at all maturities increase to 2% immediately after you have purchased the bond. Calculate the annualized holding period return if you sell the bond one year after you have purchased it, at t = 1.
(c) Suppose instead that you did not sell the bond at t = 1 and held it to maturity. What is the annualized holding period return for the five year investment?
a. The annually compounded yield to maturity on the bond is 1.7%.
b. The annualized holding period return after one year is 8.7%.
c. If the bond is held to maturity, the annualized holding period return for the five-year investment would be the same as the yield to maturity calculated in part (a), which is 1.7%.
(a) To calculate the annually compounded yield to maturity (YTM) on the bond, we can use the formula:
YTM = ((Face Value / Purchase Price) ^ (1 / Years to Maturity)) - 1
In this case, the face value of the bond is $1,000, and the purchase price is $920. The bond has a maturity of five years. Plugging in these values into the formula:
YTM = (($1,000 / $920) ^ (1 / 5)) - 1
= (1.08695652174 ^ 0.2) - 1
= 0.017 - 1
= 0.017 or 1.7%
Therefore, the annually compounded yield to maturity on the bond is 1.7%.
(b) If yields at all maturities increase to 2% immediately after purchasing the bond and you sell it after one year, the annualized holding period return can be calculated using the formula:
Holding Period Return = ((Selling Price / Purchase Price) ^ (1 / Holding Period)) - 1
Since the bond is a zero-coupon bond, the selling price after one year would be the face value of $1,000. Plugging in the values:
Holding Period Return = (($1,000 / $920) ^ (1 / 1)) - 1
= (1.08695652174 ^ 1) - 1
= 0.08695652174 or 8.7%
Therefore, the annualized holding period return after one year is 8.7%.
(c) If the bond is held to maturity, the annualized holding period return for the five-year investment would be the same as the yield to maturity calculated in part (a), which is 1.7%.
Holding the bond to maturity means receiving the face value of $1,000 at the end of the five-year period, and the return is based on the initial investment of $920. The return is earned through the discount or difference between the purchase price and the face value.
For more such questions on maturity
https://brainly.com/question/31393741
#SPJ8
According to four-drive theory, organizations maximize motivation by focusing employees on opportunities to fulfill only one of the four drives. T/F
According to the Four-Drive Theory, organizations maximize motivation by focusing employees on opportunities to fulfill all four drives :False.
The drive to acquire, the drive to bond, the drive to comprehend, and the drive to defend. The theory, proposed by Lawrence and Nohria, suggests that these four intrinsic drives are fundamental to human motivation in the workplace.
By creating a work environment that addresses and satisfies all four drives, organizations can enhance employee motivation, engagement, and overall performance. Each drive serves a unique purpose and contributes to different aspects of employee motivation and satisfaction. Therefore, it is important for organizations to consider and cater to all four drives to maximize employee motivation and well-being.
Learn more about four drive theory here:
https://brainly.com/question/30408732
#SPJ11
Which meets the criteria of a good email subject line?
A good email subject line is the one that is short, catchy, and descriptive of the content of the email. In general, the ideal length of the email subject line should be around 50 characters or less to ensure that it displays properly on all devices, including smartphones.
The subject line should convey the purpose or context of the email without being too vague or generic. It should be clear, concise, and informative, with a sense of urgency or relevance that prompts the recipient to open the email.Using capital letters, exclamation marks, or special characters can also help to draw attention to the subject line and increase the open rate. However, it is important not to overdo it as this may come across as spammy or unprofessional. Avoid using misleading or deceptive subject lines as this can lead to low open rates or even legal consequences. In summary, a good email subject line is short, descriptive, informative, and relevant to the recipient's needs or interests.
To know more about Email subject line visit-
brainly.com/question/13341491
#SPJ11
Gamboa, Inc. sold 120 selfie sticks for $15 each. If producing the selfie sticks had an average cost of $3, how much profit did the company make? Provide your answer below:
If producing the selfie sticks had an average cost of $3, the company made a profit of $1440.
As the company sold 120 selfie sticks for the price of $15 each, the total sale would be
120 x 15 = $1800.
And the production cost of one selfie stick was average $3. So, production cost for all 120 sticks would be
120 x 3 = $360
The profit of the company would be total sale amount minus the total production cost
$1800 - $360 = $ 1440
Profit is the term used to describe the financial gain experienced when the revenue from a commercial activity exceeds the costs, costs, and taxes associated with maintaining that activity.
Any profits generated are returned to the company's owners, who can decide whether to keep the money for themselves, pay dividends to shareholders, or reinvest it in the company. The money a business keeps after deducting all costs is known as profit.
Know more about profit here
https://brainly.com/question/32381738
#SPJ4
Deadweight losses from tariffs and quotas in high-income countries
a.can be justified by jobs protected.
b.are small enough to be ignored
c.are greater than consumer losses from tariffs and quotas.
d.have been reduced since the mid-1990s.
Deadweight losses from tariffs and quotas in high-income countries can be justified by jobs protected, which means that option (a) is correct.
Deadweight loss is a term used to describe the loss of economic efficiency that occurs when supply and demand for a product are not in equilibrium due to a tax, subsidy, or price ceiling. Deadweight losses from tariffs and quotas in high-income countries can be justified by jobs protected. For instance, a tariff may be imposed on foreign goods to protect domestic producers and workers, ensuring that the domestic industry remains competitive and profitable. The goal of these protectionist measures is to create more jobs and to make goods less expensive. Although the measure has its drawbacks, it is beneficial to some extent. The size of the deadweight loss from a tariff or quota can be substantial in some cases, and the losses for consumers, producers, and the economy as a whole can be significant. If a tariff or quota is intended to generate revenue for the government, the loss to the economy may be justified by the revenue received. If the objective is to protect jobs, the deadweight loss is justified, although there may be better alternatives. The term deadweight loss is not used in conjunction with a subsidy because it is intended to boost economic efficiency. The government may subsidize goods or industries to stimulate production and demand, which can result in a net economic benefit.
To know more about Deadweight losses visit:
https://brainly.com/question/31668302
#SPJ11
To confirm your grasp of the key points in this chapter, try answering the following questions. 1. Why does a corporate entity need a constitution? 2. Explain the difference between governance and management. 3. What are the two aspects of the board's work that can provide a paradox for the unitary board? 4. Describe the scope of corporate governance. 5. What sort of companies might have an all-executive board?
The statement "To confirm your grasp of the key points in this chapter, try answering the following questions" means that you should try to answer the following questions to determine if you have fully understood the main points in the chapter. Here are the answers to the questions:1. A corporate entity requires a constitution because it is a fundamental document that governs the company's activities, describes the company's objectives, and sets out the limits within which the company's operations must be conducted.2. Governance refers to the way that an organisation is managed, controlled, and directed, whereas management refers to the act of managing or supervising people, processes, and resources to achieve a particular goal. Governance is responsible for overseeing management activities.3. The two aspects of the board's work that can provide a paradox for the unitary board are:
Monitoring the effectiveness of management and making strategic decisions.
Acting as both a representative of the shareholders and as an independent decision-making body.
4. Corporate governance is the set of principles, practices, and procedures that govern how companies are managed and controlled. The scope of corporate governance includes everything from the board's structure and composition to the way that the company's objectives are set and achieved.5. An all-executive board is a board of directors composed entirely of executives from the company. Smaller companies that are closely held, and companies that are at an early stage of development, may have an all-executive board.
Learn more about chapter here: brainly.com/question/1295887
#SPJ11
Consider a hypothetical world with two countries: Country A and Country B. Per hour, Country A can produce 8080 units of Product 1 or 110110 units of Product 2, while Country B can produce 9090 units of Product 1 or 6060 units of Product 2. Each country has 140140 worker hours. Assume that, initially, each country devotes 50%50% of its available time to each product.
Initial production in Country A is 5600 units of Product 1 and 7700 units of Product 2, whereas production in Country B is 6300 units of Product 1 and 4200 units of Product 2.
In this hypothetical world, we have two countries: Country A and Country B. Each country has a certain number of worker hours available to allocate towards the production of two products: Product 1 and Product 2.
Given the production capabilities per hour for each country, we have the following information:
Country A:
- Can produce 80 units of Product 1 or 110 units of Product 2 per hour.
- Has 140 worker hours available.
Country B:
- Can produce 90 units of Product 1 or 60 units of Product 2 per hour.
- Also has 140 worker hours available.
Initially, both countries allocate 50% of their worker hours to each product. This means that in each hour, both Country A and Country B produce an equal number of units for both Product 1 and Product 2.
To determine the total production of each product for each country, we can multiply the production per hour by the number of worker hours and the initial allocation:
Country A:
- Product 1: 80 units/hour * 140 hours * 0.5 = 5600 units
- Product 2: 110 units/hour * 140 hours * 0.5 = 7700 units
Country B:
- Product 1: 90 units/hour * 140 hours * 0.5 = 6300 units
- Product 2: 60 units/hour * 140 hours * 0.5 = 4200 units
Therefore, initially, Country A produces 5600 units of Product 1 and 7700 units of Product 2, while Country B produces 6300 units of Product 1 and 4200 units of Product 2.
To know more about product efficiency refer here:
https://brainly.com/question/28415264?#
#SPJ11
organizations function within three identifiable environments: external, industry, and internal.
Organizations function within three identifiable environments: external, industry, and internal. The external environment includes factors such as technology, demographics, and economic forces.
Organizations function within three identifiable environments: external, industry, and internal. These environments have an impact on the operation of an organization and need to be considered when developing strategy and making decisions.The external environment includes factors such as technology, demographics, and economic forces. Technological advances have allowed businesses to operate in new ways and can create both opportunities and threats. Demographics play a role in determining customer preferences and needs. Economic forces can impact an organization's ability to operate and influence the availability of resources. The industry environment includes factors such as competitors, suppliers, and regulations. Competitors can drive innovation and create a need for differentiation. Suppliers can influence the availability and cost of raw materials and other inputs. Regulations can impact how an organization operates and limit its ability to grow and innovate. The internal environment includes factors such as organizational structure, culture, and resources. The structure of an organization can impact communication, decision-making, and efficiency. Culture can impact employee morale, motivation, and performance. Resources, such as financial and human capital, are necessary for an organization to operate effectively. By understanding the three environments in which organizations function, managers can better assess the impact of external factors on their operations, develop strategies to respond to these factors, and make informed decisions.
To learn more about Resources visit:
https://brainly.com/question/14289367
#SPJ11
Which of the following statements concerning the effects of fluctuating exchange rates on companies competing in foreign markets is true?
Select one:
a. Fluctuating exchange rates pose no significant risks to a company's competitiveness in foreign markets.
b. Competitive advantages of manufacturing goods in a particular country are largely unaffected by fluctuating exchange rates.
c. Exporters are advantaged when the currency of the country where goods are being manufactured grows stronger.
d. Exporters always gain in cost/price competitiveness when the currency of the country in which the goods are manufactured is weak.
e. Exporters always lose in cost/price competitiveness when the currency of the country in which the goods are manufactured is weak.
The following statements concerning the effects of fluctuating exchange rates on companies competing in foreign markets are true Exporters always gain in cost/price competitiveness when the currency of the country in which the goods are manufactured is weak.
The option (D) is correct.
At the point when the cash of the country where the products are fabricated is powerless, it implies that the merchandise can be delivered at a moderately cheaper with regards to unfamiliar money.
This gives a benefit exporters as they can offer their products at a lower cost in unfamiliar business sectors, which can build their seriousness and piece of the pie.
Learn more about fluctuating exchange:
https://brainly.com/question/13789514
#SPJ4
acob's Event Planning Service has just prepared the unadjusted trial balance, which shows the following balances Salary expense debit $8.000 Service revenue: credit $3,000 Interest expense: 50 Late in this month, Jacob signed a contract with a new client, providing event planning services for an upcoming event. The work will be started and completed in the following month at which time the company will collect the full amount of $900 from this client. The company makes accrual adjustments monthly The adjusted balance of service revenue, as shown on the adjusted trial balance for this month, should be a OA. debit balance of $900 OB. credit balance of $900 OC. credit balance of $2,100 OD. credit balance of $3,000 Combining the amounts from the unadjusted trial balance with the adjustments gives rise to the OA. adjusted trial balance OB. balance sheet OC. Income statement OD. unadjusted trial balance
The adjusted balance of service revenue, as shown on the adjusted trial balance for this month, should be a credit balance of $2,100. We can solve this problem by calculating the unadjusted and adjusting entries and then preparing the adjusted trial balance.
Step 1: Calculate unadjusted entries. The following unadjusted trial balance has been given:
Salary expense debit $8,000Service revenue: credit $3,000 Interest expense: 50We can see from the unadjusted trial balance that service revenue account has a credit balance of $3,000 and there is no entry for the event planning services provided to the new client. Hence, an adjusting entry is required.
Step 2: Calculate the adjusting entries. Adjusting entries are made to ensure that the correct revenue and expense accounts are reported on the income statement for a given period. The adjusting entry for the new contract is given below:
Adjusting entry: Service revenue account debit: $900Accounts receivable credit: $900 (Because the full amount of $900 will be collected from the client in the following month).Hence, after adjusting entries, the service revenue account will have a balance of $3,000 + $900 = $3,900Step 3: Adjusted trial balance. An adjusted trial balance is prepared after the adjusting entries have been made to ensure that the debits equal the credits.
The adjusted trial balance of Jacob's Event Planning Service is given below:
Therefore, the adjusted balance of service revenue, as shown on the adjusted trial balance for this month, should be a credit balance of $2,100. Hence, option (C) is correct.
To know more about unadjusted visit :
https://brainly.com/question/27752873
#SPJ11
Which of the following is not a risk associated with a global strategy?
A. A firm with only one manufacturing location must export its product, sometimes at great distance from the operation.
B. The geographic concentration of any activity may also tend to isolate that activity from the targeted markets.
C. Concentrating an activity in a single location makes the rest of the firm dependent on that location.
D. The pressures for local adaptation may elevate the cost structure of the firm.
The correct answer is D. The pressures for local adaptation may elevate the cost structure of the firm.
A global strategy involves operating in multiple countries and targeting global markets. While there are several risks associated with a global strategy, option D does not accurately reflect one of these risks. The pressures for local adaptation actually tend to reduce the cost structure of the firm, rather than elevate it. Local adaptation involves customizing products or services to suit the specific needs and preferences of local markets. By catering to local demands, a firm can enhance its competitiveness and increase its market share, which can ultimately lead to cost efficiencies through economies of scale and improved customer satisfaction.
While options A, B, and C accurately depict risks associated with a global strategy, option D does not. It is important to assess and manage the risks involved in a global strategy, such as the challenges of exporting products, geographic concentration, and dependence on a single location. However, the pressures for local adaptation typically contribute to cost efficiencies and market success rather than elevating the cost structure of the firm.
To know more about firm,visit:
https://brainly.com/question/31687318
#SPJ11
Cullumber Company issued $1,160,000, 13-year bonds. It agreed to make annual deposits of $93,000 to a fund (called a sinking fund), which will be used to pay off the principal amount of the bond at the end of 13 years. The deposits are made at the end of each year into an account paying 4% annual interest. Click here to view the factor table. (For calculation purposes, use 5 decimal places as displayed in the factor table provided.) What amount will be in the sinking fund at the end of 13 years? (Round answer to 2 decimal places, e.g. 25.75.) Amount in the sinking fund $
The amount in the sinking fund at the end of 13 years will be $45,991.69. In order to find out what amount will be in the sinking fund at the end of 13 years, we will use the formula for the future value of an annuity.
In order to find out what amount will be in the sinking fund at the end of 13 years, we will use the formula for the future value of an annuity. Future value of an annuity (FVA) is the amount to which a series of equal payments or deposits will grow over a specified period of time when deposited at a specified interest rate.
The formula for calculating FVA is: FVA = P * ((1 + i)n - 1) / i
where P = annual deposit, i = interest rate, and n = number of years. We know that the annual deposit is $93,000, the interest rate is 4%, and the number of years is 13. So, we can plug these values into the formula:
FVA = $93,000 * ((1 + 0.04)13 - 1) / 0.04
FVA = $93,000 * (1.598747 - 1) / 0.04
FVA = $93,000 * 0.494869
FVA = $45,991.69
Therefore, the amount in the sinking fund at the end of 13 years will be $45,991.69.
To know more about interest rate visit: https://brainly.com/question/28272078
#SPJ11
Kryton Corp. has provided the following information: Gross profit was $586,500; Cost of goods sold was $404,000; Net income was $436,000. What was Kryton's gross profit percentage? 44% o 134.5% o 68.9% o 59.2%
The Kryton Corp's gross profit percentage, we need to divide the gross profit by the net sales (revenue).
The Gross profit percentage is calculated using the formula:
Gross Profit Percentage = (Gross Profit / Net Sales) * 100 Without the net sales information, we cannot accurately determine the gross profit percentage. Therefore, we cannot calculate the specific percentage based on the given data.Please note that gross profit percentage is typically calculated by dividing gross profit by net sales and multiplying by 100 to express it as a percentage. However, without the net sales figure, we cannot proceed with the calculation.
learn more about Net sales here:
https://brainly.com/question/31517314
#SPJ11
By contract, Quality Metals Corporation forbids Resource Refining, Inc., a wholesale buyer of Quality’s products, from purchasing the products of Quality’s competitors. This is allowed
a. under any circumstances.
b. unless its effect is to cause a competitor a loss of any business.
c. unless its effect is to substantially lessen competition.
d. unless there is no effect on a competitor.
This is permissible as long as it does not lead to a material restriction of competition.
Option c is correct .
A provision in an agreement that prohibits Resource Refining, Inc. from purchasing products from Quality's competitors is anti-competitive and violates antitrust laws if it has the effect of significantly reducing competition in the marketplace. may be considered probable.
The deciding factor is the impact on competition. A provision may be deemed unlawful if it creates a monopoly or significantly reduces consumer choice or competition in the marketplace. However, it may be permitted if the provision has minimal impact on competition or if the restriction is justified (such as protection of trade secrets or product quality).
hence, Option c is correct .
To know more about Corporation visit :
https://brainly.com/question/30029715
#SPJ4
El Capitan Foods has a capital structure of 42% debt and 58% equity, its tax rate is 25%, and its beta (leveraged) is 0.70. Based on the Hamada equation, what would the firm's beta be if it used no debt, i.e., what is its unlevered beta, bu? a. 0.45 b. 0.53 C0.59 . d. 0.41 e. 0.34
The unlevered beta (bu) for El Capitan Foods, if it used no debt, is approximately 0.4536.
The Hamada equation is used to calculate the unlevered beta (bu) of a company, which represents the risk of the company's assets without the influence of debt.
The formula for the Hamada equation is:
bu = bl / [1 + (1 - t) * (D / E)]
where:
bu = Unlevered beta
bl = Levered beta
t = Tax rate
D = Debt proportion
E = Equity proportion
In this case, El Capitan Foods has a capital structure of 42% debt (D) and 58% equity (E). The tax rate (t) is given as 25%. The levered beta (bl) is 0.70.
To calculate the unlevered beta (bu), we substitute the given values into the Hamada equation:
bu = 0.70 / [1 + (1 - 0.25) * (0.42 / 0.58)]
bu = 0.70 / [1 + (0.75) * (0.7241)]
bu = 0.70 / [1 + 0.5431]
bu = 0.70 / 1.5431
bu ≈ 0.4536
Therefore, the unlevered beta (bu) for El Capitan Foods, if it used no debt, is approximately 0.4536.
Looking at the answer choices provided, the closest option is 0.45 (a), which corresponds to the calculated unlevered beta.
for more such question on beta visit
beta
#SPJ8
Saved Assume that Simple Company had credit sales of $257.000 and cost of goods sold of $157,000 for the period. Simple uses the aging method and estimates that the appropriate ending balance in the Allowance for Doubtful Accounts is $3.700. Before the end-of-period adjustment is made, the Allowance for Doubtful Accounts has a credit balance of $320. Required: What amount of Bad Debt Expense would the company record as an end of period adjustment?
The company would record $3,380 amount of Bad Debt Expense as an end-of-period adjustment.
The Allowance for Doubtful Accounts has a credit balance is $320.
Simple Company uses the aging method and estimates that the appropriate ending balance in the Allowance for Doubtful Accounts is $3,700.
Credit sales of Simple Company = $257,000
Cost of goods sold of Simple Company = $157,000
To determine the amount of Bad Debt Expense that Simple Company would record as an end-of-period adjustment, we use formula:
Ending balance of Allowance for Doubtful Accounts = Beginning balance of Allowance for Doubtful Accounts + Bad Debt Expense - Write-offs - Recoveries
Since the beginning balance of Allowance for Doubtful Accounts is a credit of $320 and the estimated ending balance is a credit of $3,700, the amount of the end-of-period adjustment for bad debts will be $3,380.
Beginning balance of Allowance for Doubtful Accounts = $320
Estimated ending balance of Allowance for Doubtful Accounts = $3,700
Bad Debt Expense = Beginning balance of Allowance for Doubtful Accounts + Bad Debt Expense - Write-offs - Recoveries
= $320 + Bad Debt Expense - Write-offs - Recoveries
= $3,700 - $320
= $3,380
Therefore, the company would record $3,380 amount of Bad Debt Expense as an end-of-period adjustment.
Learn more about the bad debt expense from the given link-
https://brainly.com/question/31191868
#SPJ11
Blanchard Company manufactures a single product that sells for $160 per unit and whose total variable costs are $120 per unit. The company’s annual fixed costs are $629,000. The sales manager predicts that annual sales of the company’s product will soon reach 39,900 units and its price will increase to $199 per unit. According to the production manager, variable costs are expected to increase to $139 per unit, but fixed costs will remain at $629,000. The income tax rate is 25%. What amounts of pretax and after-tax income can the company expect to earn from these predicted changes? Prepare a forecasted contribution margin income statement.
Answer:
Following are the solution to the given question:
Explanation:
Income statement
sales [tex]39900\times 199 \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ 7940100\\\\[/tex]
The less average cost of variable [tex]39900\times 139 \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ 5546100 \\\\[/tex]
margin for contribution [tex]2394000\\\\[/tex]
Lesser fixed costs [tex]629000\\\\[/tex]
Income from of the company or tax [tex]1765000 \\\\[/tex]
Lower-income tax by [tex]25\%[/tex] [tex]441250 \\\\[/tex]
after-tax revenue [tex]1323750\\\\[/tex]
The Samsung Galaxy has been a successful android phone for both t-Mobile and Verizon and is the current market leader. The HTC Inspire has also been popular, is sold through AT&T and Sprint and is the Galaxy's largest competitor. It is estimated that the Galaxy has a market share of 8.7 %, while the HTC comes in at 4.3 %. What is the RMS for the HTC? Round your answer to two decimal places.
The RMS (Relative Market Share) for the HTC is 0.49.
The RMS is calculated by dividing the market share of a specific brand (in this case, HTC) by the market share of the market leader (Samsung Galaxy). For the HTC, the market share is 4.3%, while the market share of the Samsung Galaxy is 8.7%.
To calculate the RMS, we divide 4.3% by 8.7%, which gives us 0.49425. Rounded to two decimal places, the RMS for the HTC is 0.49.
The RMS is a measure of the relative strength of a brand compared to the market leader. In this case, the HTC Inspire has an RMS of 0.49, indicating that it holds roughly 49% of the market share of the Samsung Galaxy, its largest competitor. This suggests that the HTC Inspire is a significant player in the market but still falls behind the Samsung Galaxy in terms of market dominance.
You can learn more about Relative Market Share at
https://brainly.com/question/32373882
#SPJ11
If the price level falls, then: (a) The Aggregate Expenditure (AE) curve will shift up and there will be a movement along the Aggregate Demand curve in the direction of higher output. (b) The Aggregate Expenditure (AE) curve will shift up and the Aggregate Demand (AD) curve will shift to the right. (c) The Aggregate Expenditure (AE) curve will shift down and the Aggregate Demand (AD) curve will shift to the left. (d) The Aggregate Expenditure (AE) curve will shift down and there will be a movement along the Aggregate Demand curve in the direction of lower output.
If the price level falls, then the Aggregate Expenditure (AE) curve will shift up and there will be a movement along the Aggregate Demand curve in the direction of higher output. Option A is the correct answer.
The primary factor influencing supply and demand in the economy is the cost of products and services. Yet, the opposite is also true: variations in demand and supply have an effect on the cost of products and services. Option A is the correct answer.
The relationship between overall price levels and total demand is not always obvious or straightforward. However, in the broadest sense, rising aggregate demand is correlated with rising price levels. The entire amount of completed products and services that are wanted in an economy is measured by aggregate demand. The total amount of money traded for such products and services at a certain price point and period is how this measurement is stated.
Learn more about Demand here:
https://brainly.com/question/1245771
#SPJ4
QUESTION 7 Budgeted Production in units 500 500 Budgeted Fixed Costs 100,000 100,000 Budgeted VC per unit 150 150 Operating Costs per Unit 75 75 Fixed Operating Costs 95,000 95,000 Selling price per unit 1,500 1,500 Expected sales per unit 200 500 Based on the above information what is the budgeted fixed cost per unit? Compute the Sales, Cost of Goods Sold and the Operating Income under 1) Variable Costing and 2) Absorption Costing.
1) Variable Costing:
Sales: $300,000
Cost of Goods Sold: $45,000
Operating Income: $217,500
2) Absorption Costing:
Sales: $300,000
Cost of Goods Sold: $145,000
Operating Income: $60,000
To calculate the budgeted fixed cost per unit, we divide the total budgeted fixed costs by the budgeted production in units.
Budgeted fixed cost per unit = Budgeted fixed costs / Budgeted production in units
Budgeted fixed cost per unit = $100,000 / 500 units
Budgeted fixed cost per unit = $200
1) Variable Costing:
Sales = Selling price per unit × Expected sales per unit
Sales = $1,500 × 200 units
Sales = $300,000
Cost of Goods Sold (Variable Costing) = Budgeted VC per unit × Expected sales per unit + Variable operating costs per unit × Expected sales per unit
Cost of Goods Sold = $150 × 200 units + $75 × 200 units
Cost of Goods Sold = $30,000 + $15,000
Cost of Goods Sold = $45,000
Operating Income (Variable Costing) = Sales - Cost of Goods Sold (Variable Costing) - Variable operating costs per unit × Budgeted production in units
Operating Income = $300,000 - $45,000 - $75 × 500 units
Operating Income = $300,000 - $45,000 - $37,500
Operating Income = $217,500
2) Absorption Costing:
Cost of Goods Sold (Absorption Costing) = Budgeted VC per unit × Expected sales per unit + Variable operating costs per unit × Expected sales per unit + Fixed manufacturing costs per unit × Budgeted production in units
Cost of Goods Sold = $150 × 200 units + $75 × 200 units + $200 × 500 units
Cost of Goods Sold = $30,000 + $15,000 + $100,000
Cost of Goods Sold = $145,000
Operating Income (Absorption Costing) = Sales - Cost of Goods Sold (Absorption Costing) - Fixed operating costs
Operating Income = $300,000 - $145,000 - $95,000
Operating Income = $60,000
Learn more about the Variable and Absorption Costing at
https://brainly.com/question/31832653
#SPJ4
2. Write out in Lingo the equation or equations plus any other Lingo instructions that capture the verbal problem. (10 points each) A. X need not be produced. But if X is produced at all, at least 250
The objective is to minimize the cost of production for products X, Y, and Z, represented by the equation 40A + 20B + 60C. The constraints ensure that if product X is produced, at least 250 units must be produced (3A + 2B + 6C >= 250), and a minimum of 20 products must be produced overall (A + B + C >= 20).
In Lingo, the equation or equations plus any other Lingo instructions that capture the verbal problem will be as follows: To capture the verbal problem, the following Lingo instructions are used: Minimize 40A + 20B + 60C
Subject to the constraints:3A + 2B + 6C >= 250A + B + C >= 20A, B, C >= 0
Where A, B, and C represent the number of products X, Y, and Z produced, respectively. The explanation of the problem is as follows: Let's consider the problem: "X need not be produced. But if X is produced at all, at least 250."
This means that the company can produce any quantity of products Y and Z, and they may or may not produce product X. But if the company produces product X, they must produce at least 250 of it. The mathematical equation for this problem is to minimize the cost of production, which is given by the function:40A + 20B + 60C, where A, B, and C represent the number of products X, Y, and Z produced, respectively.
The problem can be modeled using the following set of constraints: 3A + 2B + 6C >= 250: This constraint represents the condition that if the company produces product X, it must produce at least 250 of it.
A + B + C >= 20: This constraint represents the condition that the company must produce at least 20 products in total. A, B, C >= 0: These constraints represent the non-negativity condition on the number of products X, Y, and Z produced, respectively. The above equation and the instructions capture the given verbal problem.
To learn more about production
https://brainly.com/question/16755022
#SPJ11
The non-bank private sector holds $250 of currency and $8,000 in deposits. Banks hold $1,000 in currency as reserves. In this economy, the money multiplier is 6.3 6.6 None of the above. 07
None of the above. Without the reserve requirement ratio, it is not possible to determine the money multiplier in this economy based on the given information.
To calculate the money multiplier, we need to use the formula:
Money Multiplier = 1 / Reserve Ratio
To determine the money multiplier, we need to divide the total money supply by the monetary base. In this case, the monetary base consists of the currency held by the non-bank private sector and the reserves held by banks.
The currency held by the non-bank private sector is given as $250, and the reserves held by banks are $1,000. Therefore, the monetary base is $250 + $1,000 = $1,250.
However, we are not given the total money supply in this economy. Without knowing the total money supply, we cannot calculate the money multiplier.
The reserve ratio is the portion of deposits that banks are required to hold as reserves. In this case, the reserve ratio is not provided, so we cannot determine the money multiplier.
However, we can calculate the total reserves held by banks by adding the currency held as reserves ($1,000) and the currency held by the non-bank private sector ($250). So, the total reserves would be $1,000 + $250 = $1,250.
We can also calculate the total deposits in the economy by adding the currency held by the non-bank private sector ($250) and the deposits held by the non-bank private sector ($8,000). So, the total deposits would be $250 + $8,000 = $8,250.
The money multiplier can then be calculated as the ratio of total deposits to total reserves:
Money Multiplier = Total Deposits / Total Reserves
Money Multiplier = $8,250 / $1,250
Money Multiplier = 6.6
The correct money multiplier for the given scenario is 8, which differs from the options provided.
To know more about economy , visit;
https://brainly.com/question/28210218
#SPJ11
What happens to the welfare of a large nation as a result of the following forms of technical progress if consumption is trade neutral?
a. Neutral technical progress in production of the exportable good.
b. Neutral technical progress in production of the importable good.
a. Neutral technical progress in the production of the exportable good can potentially enhance the welfare of a large nation through increased exports and income.
b. Neutral technical progress in the production of the importable good can potentially improve the welfare of a large nation by reducing prices and increasing consumer purchasing power.
When considering the welfare of a large nation in the context of trade and technical progress, the impact of neutral technical progress in the production of the exportable and importable goods can be analyzed.
a. Neutral technical progress in the production of the exportable good:
If there is neutral technical progress in the production of the exportable good, it implies that the productivity of resources used in producing the exportable good has improved without affecting the terms of trade. As a result, the nation's production capacity for the exportable good increases. This leads to an expansion in exports, which can benefit the nation's welfare.
With increased production and exports of the exportable good, the nation can generate higher income and potentially experience positive welfare effects. The increased export revenue can contribute to economic growth, employment opportunities, and improved living standards. Additionally, the nation may have access to more resources to allocate towards other sectors or goods, further enhancing welfare.
b. Neutral technical progress in the production of the importable good:
If there is neutral technical progress in the production of the importable good, it implies that the productivity of resources used in producing the importable good has improved without affecting the terms of trade. This leads to a reduction in the cost of producing the importable good, making it cheaper for the nation to acquire.
The reduced cost of the importable good benefits the nation's consumers by lowering prices and increasing their purchasing power. As a result, consumers can enjoy a higher standard of living and increased welfare. Additionally, the availability of cheaper importable goods can lead to a more efficient allocation of resources within the nation, which can further contribute to welfare improvements.
Overall, both forms of neutral technical progress have the potential to positively impact the welfare of a large nation. Increased production and exports of the exportable good can boost income and economic growth, while improved productivity in the production of the importable good can enhance consumer welfare through lower prices and increased purchasing power.
To learn more about Neutral technical progress refer here:
https://brainly.com/question/32703219
#SPJ11
which of the following examples would be considered an unfunded mandate?
An unfunded mandate is a statute or regulation that requires a state or local government to perform certain activities or provide services, without providing funds to cover the cost of those activities or services. The correct option is the federal government required universities to accept more students tuition-free without appropriating more funds to offset the lost revenue.
Unfunded mandates place a financial burden on the state or local government, which may lead to cuts in other programs or services to balance the budget. Below are some examples of unfunded mandates :Expanding Medicaid coverage without providing additional funding to cover the costs.
Imposing new environmental regulations on state and local governments without providing funding to comply with the regulations. Imposing new education standards on schools without providing funding for additional resources or training. Mandating security measures for elections without providing funding to cover the costs. The correct option is c.
The complete question is:
Which of the following examples would be considered an unfunded mandate?
-Texas universities were required to allow veterans and their children to attend tuition-free and the federal government covered the costs.
-The state legislature considers an income tax to fund public schools and higher education in the state.
-The federal government required universities to accept more students tuition-free without appropriating more funds to offset the lost revenue.
-The federal government funded federal veterans health centers and required them to serve all veterans.
-The federal government extended more benefits to veterans and increased block grants to cover the costs.
For more about government:
https://brainly.com/question/4160287
#SPJ11
Which of the following is an example of a critical incident question? O Tell me about a time when you put in extra effort to finish a project on time" O "If the CEO was here right now and asked you how to improve the company, what would you say? O Would you be willing to travel to South Africa two or three times a year? O "How would you handle an employee who is habitually 5 or 10 minutes late for his shift? QUESTION 3 Surveys of interviewers and small business owners showed that when these groups were presented with a list of llegal job int mistakenly o hardly any of them O about half of them a large majority
The example of a critical incident question from the options provided is: "How would you handle an employee who is habitually 5 or 10 minutes late for his shift?"
A critical incident question is designed to assess a candidate's ability to handle specific workplace situations or challenges. It aims to elicit responses that reveal the candidate's problem-solving skills, decision-making abilities, and their approach to handling difficult scenarios. In this case, the question about handling an employee who is habitually late for their shift is an example of a critical incident question because it presents a specific workplace situation that requires the candidate to provide a thoughtful and strategic response. The question assesses the candidate's potential conflict resolution skills, communication abilities, and their understanding of managing employee behavior in a professional setting.
Critical incident questions are valuable in the interview process as they allow employers to gauge a candidate's practical experience and problem-solving capabilities. By presenting real or hypothetical scenarios, employers can assess how candidates would respond to challenging situations in the workplace. These questions provide insight into a candidate's decision-making processes, interpersonal skills, and their ability to handle conflict or difficult employee situations effectively.
To know more about Employee,visit:
https://brainly.com/question/16952744
#SPJ11
should I rko my handicap grandma
Answer:
no u shloud not rko her ,.
Explanation:
Answer:
How would i know?
Explanation:
POINTS
Which of the following is correct? If interest rates are expected to fall, investors may prefer bonds with longer duration. The higher the yield, the longer the duration. The higher the coupon rate, the longer the duration. If interest rates are expected to rise, investors may prefer bonds with longer duration.
The correct statement is if interest rates are expected to rise, investors may prefer bonds with longer duration. Option d is correct.
Duration is a widely-used measure of bond investment risk that calculates the bond's sensitivity to variations in interest rates. The period indicates the bond's interest rate sensitivity over time. Furthermore, the bond with a higher period is more vulnerable to changes in interest rates.
Bonds with longer maturities, or durations, are usually more sensitive to interest rate fluctuations because they have a greater number of payments in the future. The duration of a bond is an estimation of how much its price would adjust if interest rates shift by a certain percentage.
An investor can make better choices about which bonds to purchase or sell and which ones to keep in their portfolio by understanding the concept of duration.
Therefore, d is correct.
Learn more about interest rates https://brainly.com/question/28236069
#SPJ11
Calculate the amount of two commodities that maximizes satisfaction from the following budget line and the utility function,. What is the maximum amount of satisfaction?
4000 = 25X +35Y
U= 400 X^0.6X^0.7
Given budget line is 4000 = 25X + 35Y and the utility function is U = 400 X^0.6Y^0.7.To calculate the amount of two commodities that maximizes consumer satisfaction from the given budget line and utility function, we will use the Lagrange multiplier method.
Let L(X,Y,λ) = U(X,Y) + λ [M - PX - QY] be the Lagrangian equation Where L
= Lagrangian function, X
= quantity of commodity X, Y
= quantity of commodity Y, λ = Lagrange multiplier, U = Utility function, P = Price of commodity X, Q
= Price of commodity Y, and M = Income of the consumerPut the given value of U and M into the equation above, we haveL(X,Y,λ) = 400 X^0.6Y^0.7 + λ[4000 - 25X - 35Y].
Now, solve for the first order conditions ∂L/∂X, ∂L/∂Y, and ∂L/∂λ∂L/∂X = 0∂L/∂X = 240X^-0.4Y^0.7 - 25λ = 0∂L/∂Y = 280X^0.6Y^-0.3 - 35λ
= 0∂L/∂λ = 4000 - 25X - 35Y = 0From equation (1), we have 240X^-0.4Y^0.7 = 25λ ...........
(i)From equation (2), we have 280X^0.6Y^-0.3 = 35λ ...........(ii) Multiplying equation (i) by 7/5 and multiplying equation
(ii) by 6/4, we have:(7/5) × 240X^-0.4Y^0.7 = (7/5) × 25λ ..........
.(iii)(6/4) × 280X^0.6Y^-0.3 = (6/4) × 35λ ...........(iv)Now, dividing equation
(iii) by equation (iv), we get:X/Y = (7/5) × (4/6) × [(280/240)^(0.3/1.1)]X/Y = 0.763Y/X = 1.309Putting the value of X/Y in the budget line equation,
we have:4000
= 25X + 35Y4000 = 25X + 35 (0.763X)4000
= 51.805X ⇒ X
= 77.3Now, Y = (0.763)77.3
= 58.94 Thus, the maximum amount of satisfaction is U(X,Y)
= 400 X^0.6Y^0.7
= 296482.8 (approx)Therefore, the maximum amount of satisfaction is 296482.8 (approx).
To know more about Consumer visit:
https://brainly.com/question/30165369
#SPJ11