A gas originally at 27 degree celsius and 1.00 atm pressure in a 3.9 L flask is cooled at constant pressure until the temperature is 11 degrees celsius. The new volume of the gas is?

The volume of the diluted solution is 31.2 ml.

This can be found using the dilution equation, C1V1 = C2V2. We know that the initial concentration (C1) is 12.0 M, the initial volume (V1) is 3.12 ml, and the final concentration (C2) is 1.20 M. Solving for V2, we get V2 = (C1V1)/C2 = (12.0 M x 3.12 ml)/1.20 M = 31.2 ml.

The dilution equation is commonly used in chemistry to calculate the final volume or concentration of a solution after dilution. It states that the product of the initial concentration and volume is equal to the product of the final concentration and volume.

This equation allows us to manipulate the known variables to find the unknown ones. In this case, we started with a highly concentrated stock solution of hydrochloric acid and needed to dilute it to a lower concentration.

By using the dilution equation, we were able to find the final volume of the diluted solution needed to achieve the desired concentration.

To know more about dilution equation click on below link:

https://brainly.com/question/11493179#

#SPJ11

To convert moles to grams, we need to use the molar mass of benzoic acid: 0.00200 moles x 122.12 g/mol = 0.244 g So, about 0.244 grams of benzoic acid will be neutralized by 20.00 mL of the prepared NaOH solution.

Since benzoic acid and NaOH react in a 1:1 ratio, the moles of benzoic acid needed to neutralize the NaOH will be equal to the moles of NaOH.
Moles of benzoic acid = Moles of NaOH = 0.00200 moles
To find the mass of benzoic acid in grams, simply multiply the moles by its molar mass:
Mass of benzoic acid = (0.00200 moles) x (122.12 g/mol) = 0.244 g
So, you will need 0.00200 moles or 0.244 grams of benzoic acid to neutralize the 20.00 mL of prepared NaOH solution.

Learn more about moles here: https://brainly.com/question/29367909

#SPJ11

NiCO₃, which is nickel(II) carbonate, has a Ksp of 1.42 x 10⁻⁷. Determine the compound's molar solubility, S. NiCO₃(s) + Ni₂₊ + CO₃²⁻(aq) chemical reaction. Ksp = 1.42·10⁻⁷.

The equilibrium constant for a solid material dissolving in an aqueous solution is the solubility product constant, Ksp. It stands for the degree of solute dissolution in solution. A substance's Ksp value increases with how soluble it is.

NiCO₃, the nickel(II) carbonate, has the following Ksp expression:

Ksp = [Ni₂₊][CO₃²⁻]

where [Ni₂₊] and [CO₃²⁻] are the concentrations of nickel and carbonate ions, respectively, in the solution.

Fe(OH)₂, the iron(II) hydroxide, has the following Ksp expression:

Ksp = [Fe₂₊][OH⁻]²

where [Fe₂₊] denotes the amount of iron(II) ions in the solution and [OH⁻] denotes the amount of hydroxide ions in the solution.

To know more about solubility visit:-

https://brainly.com/question/28170449

#SPJ1

The solution has a molality of 0.658 mol/kg.

The amount of moles of solute per kilogram of solvent is known as molality (m).

We must first determine the number of moles of NaI3 in the solution in order to determine the molality of a solution containing 314 grams of NaI3 in 1.18 kilograms of water.

The formula below can be used to determine NaI3's molar mass:

Na: 1 x 22.99 = 22.99 g/mol

I: 3 x 126.90 = 380.70 g/mol

Total molar mass: 22.99 + 380.70 = 403.69 g/mol

The number of moles of NaI3 in the solution is therefore:

moles = mass/molar mass

moles = 314 g/403.69 g/mol

moles = 0.7786 mol

Next, we need to calculate the mass of water in the solution:

mass of water = 1.18 kg = 1180 g

Finally, we can determine the solution's molality:

molality = moles of solute/mass of solvent (in kg)

molality = 0.7786 mol/1.18 kg

molality = 0.658 mol/kg

Therefore, The solution has a molality of 0.658 mol/kg.

Learn more about molality here : brainly.com/question/24065939

#SPJ1

The presence of multiple equilibria can result in the formation of different species of silver ions in solution due to the formation of different complexes with ligands.

The presence of multiple equilibria can result in the formation of different species in a chemical reaction. In the case of silver ion (Ag⁺) in solution, it can form various complexes with ligands (such as ammonia, chloride ions, etc.) that have different equilibrium constants. This can lead to the formation of multiple equilibria and different species of silver ions in solution.

One possible observation in this case could be the formation of a precipitate of AgCl when silver nitrate (AgNO₃) is added to a solution containing chloride ions (Cl⁻). The net ionic equation for this reaction is:

Ag⁺ (aq) + Cl⁻ (aq) → AgCl (s)

In this reaction, Ag⁺ and Cl⁻ ions are in equilibrium with each other, and the reaction proceeds to form AgCl precipitate due to the insolubility of AgCl.

Equation 16.6 refers to the formation constant of a complex ion with a ligand. For example, the formation constant of the Ag(NH3)₂⁺ complex ion can be given by:

Ag⁺ + 2 NH₃ ⇌ Ag(NH3)₂⁺

The equilibrium constant for this reaction can be represented by Kf. Therefore, the presence of different ligands and their respective formation constants can result in the formation of multiple species of silver ions in solution, leading to multiple equilibria.

To know more about equilibria, here

brainly.com/question/29313546

#SPJ4

Answer:

pH = 4.90

Explanation:

Use the hassel henderbach equation:

[tex]pH = pKa + log(\frac{Conjugate Acid or Base}{Acid or Base})\\pH = -log(3.5*10^-4)+log(\frac{\frac{0.63g Naf}{45/1000L} }{0.5 M HF}) = 4.90[/tex]

b. HNO2(aq) + NH3(aq) --> NH4NO2(aq) is the neutralization reactions has a pH > 7 when equal molar amounts of acid and base are mixed.

Explanation: In a neutralization reaction, an acid reacts with a base to produce a salt and water. When equal molar amounts of acid and base are mixed, the resulting pH depends on the acidity and basicity of the products.
a. CH3CO2H(aq) + NaOH(aq) --> H2O(l) + NaCH3CO2(aq)
Acetic acid (CH3CO2H) is a weak acid and sodium hydroxide (NaOH) is a strong base. The reaction produces water and sodium acetate (NaCH3CO2), a salt of a weak acid and a strong base. The pH of this reaction would be greater than 7.
b. HNO2(aq) + NH3(aq) --> NH4NO2(aq)
Nitrous acid (HNO2) is a weak acid and ammonia (NH3) is a weak base. The reaction produces ammonium nitrite (NH4NO2), a salt of a weak acid and a weak base. The pH of this reaction would be close to 7 but slightly greater than 7 due to the higher basicity of ammonia.
c. HCl(aq) + NaOH(aq) --> H2O(l) + NaCl(aq)
Hydrochloric acid (HCl) is a strong acid and sodium hydroxide (NaOH) is a strong base. The reaction produces water and sodium chloride (NaCl), a salt of a strong acid and a strong base. The pH of this reaction would be exactly 7.
Based on the given choices, option b has a pH slightly greater than 7 when equal molar amounts of acid and base are mixed.

learn more about neutralization here

https://brainly.com/question/28970253

#SPJ11

The molality of the solution is 78.11 m, which means that there are 78.11 moles of naphthalene per kilogram of benzene. The molality is a concentration unit that is defined as the number of moles of solute per kilogram of solvent.

In this case, we have 0.100 mole of naphthalene dissolved in 100. g of benzene, which is equivalent to 0.1/128.17 = 0.0007802 kg of naphthalene and 0.100/78.11 = 0.0012798 kg of benzene. Therefore, the total mass of the solution is 0.0007802 + 0.0012798 = 0.00206 kg.

To calculate the molality, we need to divide the number of moles of solute by the mass of solvent in kilograms. So, the molality is:

molality = (0.100 mol)/(0.0012798 kg) = 78.11 m

This value is a measure of the concentration of the solution and it is independent of the temperature and pressure. It is also useful in calculating other properties of the solution, such as the boiling point elevation and the freezing point depression.

To know more about molality refer here:

https://brainly.com/question/26921570#

#SPJ11

In general, a polar stationary phase, such as a silica gel or alumina column, is effective for separating alcohols based on their polarity.

The stationary phase that should be chosen to separate a mixture of alcohols depends on the specific alcohols in the mixture and their properties. The appropriate stationary phase to separate a mixture of alcohols is typically a polar stationary phase, such as silica gel or polymeric sorbents. This is because alcohols are polar compounds, and in chromatography, like dissolves like. A polar stationary phase will interact more strongly with the polar alcohols, allowing for better separation.

Alternatively, a stationary phase with a high degree of cross-linking, such as a polymeric resin, can provide improved resolution and selectivity for certain alcohol mixtures. Other factors to consider include the desired separation efficiency, column length and diameter, and operating conditions such as temperature and flow rate. Ultimately, the best stationary phase for a given alcohol mixture will depend on a careful evaluation of these factors and the specific separation goals.

To know more about Column Chromatography:
https://brainly.com/question/30296545

#SPJ11

The pH of a solution that is 0.085 M in HNO₃ and 0.15 M in HBrO is approximately 1.07.

To calculate the pH of this solution, first recognize that HNO₃ is a strong acid and will fully dissociate, while HBrO is a weak acid. For HNO₃, the [H⁺] concentration is 0.085 M. Next, apply the Ka expression for HBrO: Ka = [H⁺][BrO⁻] / [HBrO].

Plug in the given Ka value (2.3 x 10⁻⁹) and the initial concentration of HBrO (0.15 M). Since [H⁺] from HNO₃ is much larger than what HBrO will contribute, you can approximate [H⁺] to be 0.085 M. Solve for [BrO⁻], which is approximately 3.22 x 10⁻⁹ M.

Finally, calculate the pH using the formula pH = -log([H⁺]). The pH of the solution is approximately 1.07.

To know more about strong acid click on below link:

https://brainly.com/question/8743052#

#SPJ11

The quantity in moles of NaOH needed to be added to 200.0 mL of a 0.200 M solution of HF to make a buffer with a pH of 2.80 is 2.72 x 10⁻⁵ moles of NaOH.

A buffer is a solution of a weak acid and its conjugate base, or a weak base and its conjugate acid. When making a buffer, the key is to maintain a constant pH.

In this problem, we are given that the desired pH of the buffer is 2.80, the volume of the solution is 200.0 mL, and the Ka of HF is 6.8 × 10⁻⁴.

The first step is to calculate the concentration of the HF in the solution. Since the volume is given in mL, we need to convert it to liters. This can be done by dividing 200.0 mL by 1000, giving us 0.200 L. Since the concentration is 0.200 M, we can determine the number of moles of HF in the solution by multiplying the molarity by the volume. This gives us 0.200 moles of HF.

Next, we need to calculate the concentration of the conjugate base, NaOH. The Ka of HF is 6.8 × 10⁻⁴, so we can use the Henderson-Hasselbalch equation to calculate the ratio of conjugate base to acid. This ratio is given by:

(Concentration of conjugate base) / (Concentration of acid) = Ka

Rearranging this equation gives us:

(Concentration of conjugate base) = Ka * (Concentration of acid)

Substituting the given values gives us:

(Concentration of conjugate base) = 6.8 x 10⁻⁴ * 0.200

This gives us a concentration of 1.36 x 10⁻⁴ M.

Finally, we can use this concentration to calculate the number of moles of NaOH needed to make the buffer. This is done by multiplying the concentration by the volume, giving us:

Moles of NaOH = (Concentration of conjugate base) * (Volume)

= 1.36 x 10⁻⁴ * 0.200

= 2.72 x 10⁻⁵ moles of NaOH.

Therefore, the quantity in moles of NaOH needed to be added to 200.0 mL of a 0.200 M solution of HF to make a buffer with a pH of 2.80 is 2.72 x 10⁻⁵ moles of NaOH.

For more questions related to conjugate base

https://brainly.com/question/14684465

#SPJ1

Equilibrium is a state where the forward and reverse reactions of a chemical system occur at equal rates. Le Châtelier's Principle states that a system in equilibrium will shift in response to a change in conditions to re-establish equilibrium.

In this lab report, the equilibrium system being studied is HA (aq) = H (aq) + A (aq), where HA represents the acidic form of the bromothymol blue indicator and A represents the basic form.

Upon completing Step 1, the color of bromothymol blue in distilled water was observed to be yellow. When reagent A was added in Step 2, the color changed to blue, indicating a shift toward the basic form of the indicator. Reagent A is likely a base, causing the equilibrium system to shift towards the basic form to re-establish equilibrium.

In Step 3, reagent B caused a return to the original yellow color. Reagent B is likely an acid, causing the equilibrium system to shift towards the acidic form of the indicator to re-establish equilibrium.

Overall, this lab report demonstrates the principles of Le Châtelier's Principle in action and how changes in conditions can affect equilibrium systems.

Learn more about Equilibrium here:

https://brainly.com/question/30807709

#SPJ11

(a) pH an aqueous solution of 0.083 M HCl at 25°C is 1.08.

(b) pH of an aqueous solution 7.3 × [tex]10^-^3[/tex] M HNO₃ at 25°C is 2.14.

(c) pH of an aqueous solution 3.1 × [tex]10^-^6[/tex] M HClO₄ at 25°C is 2.26.

(a) For 0.083 M HCl, we can assume that all of the HCl will dissociate in water, so the concentration of H⁺ ions is equal to the concentration of HCl. Therefore, [H⁺] = 0.083 M.

To find the pH, we use the equation: pH = -log[H⁺].

pH = -log(0.083) = 1.08

Therefore, the pH of the solution is 1.08.

(b) For 7.3 × [tex]10^-^3[/tex] M HNO₃, we can also assume complete dissociation of HNO₃. Therefore, [H⁺] = [NO₃⁻] = 7.3 × [tex]10^-^3[/tex] M.

pH = -log(7.3 × [tex]10^-^3[/tex]) = 2.14

Therefore, the pH of the solution is 2.14.

(c) For 3.1 × [tex]10^-^6[/tex] M HClO₄, we need to take into account the fact that HClO₄ is a strong acid, but it is not completely dissociated in water. The dissociation constant (Ka) of HClO₄ is 7.5 × [tex]10^-^1[/tex]. Therefore, we can assume that [H⁺] = [ClO₄⁻] = x (where x is the concentration of H⁺ ions).

Using the equation for the dissociation constant of an acid (Ka = [H⁺][ClO₄⁻]/[HClO₄]), we can write:

7.5 × [tex]10^-^1[/tex] = x²/3.1 × [tex]10^-^6[/tex]

Solving for x, we get:

x = 5.45 × [tex]10^-^3[/tex] M

pH = -log(5.45 × [tex]10^-^3[/tex]) = 2.26

Therefore, the pH of the solution is 2.26.

Learn more about pH

brainly.com/question/1625945

#SPJ11

The magnesium ion molarity for a solution with a concentration of 176.4 ppm is 7.25 x [tex]10^-^3[/tex] M, and the total hardness of a water sample containing 21.4 ppm Mg²⁺ and 51.9 ppm Ca²⁺ is 4.35 ppm of CaCO₃.

To calculate the magnesium ion molarity for a solution with a concentration of 176.4 ppm:

Convert the concentration from ppm (parts per million) to mg/L:

176.4 ppm = 176.4 mg/L

Calculate the molar mass of Mg²⁺:

Mg²⁺ has a molar mass of 24.31 g/mol

Calculate the number of moles of Mg²⁺ in 1 L of the solution:

176.4 mg/L / 24.31 g/mol = 7.25 x [tex]10^-^3[/tex] mol/L

So the magnesium ion molarity is 7.25 x [tex]10^-^3[/tex] M.

To calculate the hardness of a water sample containing 21.4 ppm Mg²⁺ and 51.9 ppm Ca²⁺:

Convert the concentrations from ppm to mg/L:

21.4 ppm Mg²⁺ = 21.4 mg/L

51.9 ppm Ca²⁺ = 51.9 mg/L

Calculate the equivalent concentration of each ion in the water sample:

One mole of Mg²⁺ or Ca²⁺ ions will react with two moles of the complexing agent used in the hardness test. Therefore, the equivalent concentration of each ion is calculated by dividing the concentration (in mg/L) by the ion's equivalent weight:

Equivalent weight of Mg²⁺ = 12.16 g/mol

Equivalent weight of Ca²⁺ = 20.04 g/mol

Equivalent concentration of Mg²⁺ = 21.4 mg/L / 12.16 g/mol = 1.76 equivalent ppm

Equivalent concentration of Ca²⁺ = 51.9 mg/L / 20.04 g/mol = 2.59 equivalent ppm

Calculate the total hardness of the water sample:

Total hardness = equivalent concentration of Mg2² ⁺ equivalent concentration of Ca⁺

Total hardness = 1.76 equivalent ppm + 2.59 equivalent ppm = 4.35 equivalent ppm

Convert the total hardness from equivalent ppm to ppm of CaCO₃:

1 equivalent ppm = 1 mg/L of CaCO3

So, the total hardness of the water sample is 4.35 ppm of CaCO₃.

Learn more about Magnesium ion molarity

brainly.com/question/15440029

#SPJ11

a) The values are q = 2199 J, w = -1099 J, ΔU = 1100 J, ΔH = 2199 J, ΔS = 6.33 J/K
b) The values are q = 1100 J, w = 0 J, ΔU = 1100 J, ΔH = 2199 J, ΔS = 3.19 J/K
c) The values are q = 685 J, w = 685 J, ΔU = 0 J, ΔH = 0 J, ΔS = 2.21 J/K


a) For constant pressure heating, q = nCpΔT = (2.25)(5/2R)(675-310), w = -PextΔV = -nRΔT, ΔU = q - w, ΔH = nCpΔT, ΔS = q/T2 - q/T1

b) For constant volume heating, q = nCvΔT = (2.25)(3/2R)(675-310), w = 0, ΔU = q, ΔH = nCpΔT, ΔS = q/T2 - q/T1

c) For reversible isothermal expansion, q = w = nRTln(P1/P2), ΔU = ΔH = 0, ΔS = nRln(V2/V1)

To know more about isothermal expansion click on below link:

https://brainly.com/question/4674503#

#SPJ11

Mechanism: Electrophilic substitution via protonation and deprotonation with the aid of D2SO4, leading to gradual replacement of benzene hydrogens by deuterium.

D2SO4 serves as a source of the electrophilic H+ ion, which attacks the electron-rich benzene ring, forming a sigma complex. The sigma complex then undergoes deuterium substitution, facilitated by the presence of excess D2SO4 and the acidic environment. This process repeats until all the hydrogens on the benzene ring have been replaced by deuterium, resulting in the formation of fully deuterated benzene (hexadeuterobenzene).

Learn more about hydrogens here:

https://brainly.com/question/28937951

#SPJ11

The mass of HCl required is 73 g (to two significant figures).

To find the mass of HCl, follow these steps:

1. Determine the molar mass of Zn, HCl, and ZnCl₂ using their atomic masses: Zn = 65.38 g/mol, HCl = 36.46 g/mol, ZnCl₂ = 136.32 g/mol.

2. Calculate the moles of Zn²⁺: moles of Zn²⁺ = mass of Zn²⁺/molar mass of Zn = 38 g / 65.38 g/mol ≈ 0.581 mol.

3. Use the balanced equation's stoichiometry (1:2 ratio) to find moles of HCl: moles of HCl = 2 × moles of Zn²⁺ = 2 × 0.581 mol ≈ 1.162 mol.

4. Calculate the mass of HCl: mass of HCl = moles of HCl × molar mass of HCl = 1.162 mol × 36.46 g/mol ≈ 73 g (to two significant figures).

To know more about balanced equation's click on below link:

https://brainly.com/question/7181548#

#SPJ11

The balanced chemical equation for the thermite reaction is: Fe2O3 (s) + 2Al(s) → Al2O3 (s) + 2Fe(l)

In this reaction, solid iron (Fe) and solid aluminum oxide (Al2O3) are formed as products. The states of matter are indicated in parentheses: (s) for solid and (l) for liquid. Fe2O3(s) + 2Al(s) → Al2O3(s) + 2Fe(l)

The thermite reaction is an exothermic reaction between a metal oxide and a reducing agent, typically aluminum. The balanced chemical equation for the thermite reaction between iron(III) oxide and aluminum.

In this equation, two molecules of aluminum react with one molecule of iron(III) oxide to form two molecules of iron and one molecule of aluminum oxide, along with the release of a significant amount of heat. This reaction is commonly used in welding and pyrotechnics due to its intense heat production. It is important to note that the equation must be balanced to accurately represent the reaction, with equal numbers of each element on both sides of the equation.

To learn more about aluminum oxide click here

brainly.com/question/9496279

#SPJ11

The molecular formula for toluene is C7H8. It consists of a benzene ring with a methyl group (-CH3) attached to it.

Toluene is an aromatic compound and has two resonance structures, which are equivalent representations of the molecule. In one structure, the double bond between two carbon atoms of the benzene ring is broken, and one carbon has a positive charge while the other has a negative charge. In the other structure, the double bond between two different carbon atoms of the ring is broken, and the methyl group carries a positive charge. These resonance structures show the delocalization of electrons in the benzene ring, making it a more stable molecule.

Learn more about molecular formula here:

https://brainly.com/question/28647690

#SPJ11

The change in Gibbs free energy of 1.0 mol of hydrogen regarded as an ideal gas, when it is compressed isothermally from 1.0 atm to 700 atm at 298.15 K is approximately 14,466 J/mol.

To calculate the change in Gibbs free energy (ΔG) for the isothermal compression of 1.0 mol of hydrogen gas from 1.0 atm to 700 atm at 298.15 K, we can use the formula:

ΔG = nRT ln(P₂/P₁)

where n is the number of moles, R is the ideal gas constant (8.314 J/mol·K), T is the temperature in Kelvin, and P₁ and P₂ are the initial and final pressures, respectively. Plugging in the values, we have:

ΔG = (1.0 mol) * (8.314 J/mol·K) * (298.15 K) * ln(700 atm / 1.0 atm)

ΔG ≈ 14466 J/mol

So, the change in Gibbs free energy for the isothermal compression of 1.0 mol of hydrogen gas from 1.0 atm to 700 atm at 298.15 K is approximately 14,466 J/mol.

Learn more about Gibbs free energy here: https://brainly.com/question/13765848

#SPJ11

To determine the pH of a solution of NaN3, we need to first consider the dissociation of HN3, the acid form of NaN3, in water. The equilibrium equation for the dissociation of HN3 is:

HN3 + H2O ⇌ H3O+ + N3-

The acid dissociation constant, Ka, for HN3 is given as 1.9 × 10−5. This means that at equilibrium, the concentration of H3O+ and N3- can be determined using the following equation:

Ka = [H3O+][N3-]/[HN3]

Since NaN3 is a salt, it dissociates completely in water to form Na+ and N3-. However, N3- can react with water to form HN3 and OH-. Therefore, the concentration of HN3 can be determined using the equilibrium equation for the reaction of N3- with water:

N3- + H2O ⇌ HN3 + OH-

The equilibrium constant for this reaction is Kw/Ka, where Kw is the ion product constant of water and has a value of 1.0 × 10^-14 at 25°C.

Kw/Ka = (1.0 × 10^-14)/(1.9 × 10^-5) = 5.26 × 10^-10

Let x be the concentration of HN3 and [OH-] be the concentration of hydroxide ions. Then the concentration of N3- is also x, and the concentration of H3O+ is (Ka/x). Using the equilibrium constant expression for the reaction of N3- with water, we have:

Kw/Ka = [HN3][OH-]/[N3-]

Substituting the values for Kw/Ka and the concentrations of HN3 and N3-, we get:

5.26 × 10^-10 = [(Ka/x)(x + [OH-])]/x

Simplifying and rearranging the equation, we get:

x^2 + Ka[OH-] - Kw = 0

Substituting the values for Ka and Kw, we get:

x^2 + (1.9 × 10^-5)[OH-] - 1.0 × 10^-14 = 0

Solving for [OH-], we get:

[OH-] = (−Ka ± √(Ka^2 + 4Kw))/2 = (−1.9 × 10^-5 ± √(1.9 × 10^-5)^2 + 4(1.0 × 10^-14))/2

Taking the positive value of [OH-] (since pH = -log[H3O+], and [OH-][H3O+] = Kw), we get:

[OH-] = 2.4 × 10^-6 M

The pH of the solution can be calculated as:

pH = -log[H3O+] = -log(Ka/[OH-]) = -log(1.9 × 10^-5/[2.4 × 10^-6]) = 3.58

Therefore, the pH of a 0.681 M solution of NaN3 is approximately 3.58.

Click the below link, to learn more about pH of solution:

https://brainly.com/question/12482336?

#SPJ11"

The concentration of C₅H₅NHCl necessary to buffer a 0.44 M C₅H₅N solution at pH 5.00 is 0.24 M.


1. Calculate the pOH by subtracting pH from 14: pOH = 14 - 5.00 = 9.

2. Find the OH⁻ concentration using the pOH: [OH⁻] = [tex]10^-^p^O^H[/tex] = 10⁻⁹.

3. Calculate the concentration of the base (C₅H₅N) in its ionized form: [C₅H₅N⁻] = (Kb × [C₅H₅N]) / [OH⁻] = (1.7 × 10⁻⁹ × 0.44) / 10⁻⁹ = 0.748 M.

4. Use the Henderson-Hasselbalch equation: pH = pKa + log ([A⁻]/[HA]).

5. Rearrange to solve for [HA]: [HA] = [A⁻] / [tex]10^(^p^K^_a-pH)[/tex].

6. Calculate [HA]: [HA] = 0.748 / (10⁽⁹⁻⁵⁾)= 0.24 M.

Thus, the concentration of C₅H₅NHCl needed is 0.24 M.

To know more about Henderson-Hasselbalch equation click on below link:

https://brainly.com/question/13423434#

#SPJ11

The order of the mass measurements from smallest to largest is: 10 mg: This is the smallest unit of mass measurement in the given list. It is equal to 0.01 grams or 0.00001 kilograms.

10 g: This is the second smallest unit of mass measurement in the given list. It is equal to 10,000 milligrams or 0.01 kilograms.

10 kg: This is the second largest unit of mass measurement in the given list. It is equal to 10,000 grams or 10,000,000 milligrams.

10 Mg: This is the largest unit of mass measurement in the given list. It is equal to 10,000 kilograms or 10,000,000 grams.

It is important to understand the different units of mass measurement and their conversions, as they are used in many fields, such as science, engineering, and medicine, to measure and calculate the properties of objects and materials.

To know more about measurement

brainly.com/question/2107310

#SPJ11

The pH of the buffer solution is approximately 4.83.

To find the pH of this buffer solution, we need to use the Henderson-Hasselbalch equation:

pH = pKa + log([A-]/[HA])

where pKa is the dissociation constant of the weak acid, [A-] is the concentration of the conjugate base, and [HA] is the concentration of the weak acid.

First, we need to calculate the pKa of the weak acid:

pKa = -log(3.7×10−5) = 4.43

Next, we can plug in the values given for the concentrations of the weak acid and conjugate base:

pH = 4.43 + log(0.400/0.160)

pH = 4.43 + log(2.5)

pH = 4.43 + 0.397

pH = 4.83

Learn More about pH here :-

https://brainly.com/question/30656928

#SPJ11

Since [C9H8NO3^-] = [H^+], the concentration of C9H8NO3^- is also 2.2 x 10^-4 M.

Hippuric acid has the chemical formula C9H8NO3 and dissociates in water to form C9H8NO3^- and H^+ ions. The dissociation reaction is as follows:

C9H8NO3 (aq) ⇌ C9H8NO3^- (aq) + H^+ (aq)

The concentration of C9H8NO3^- can be calculated using the equilibrium constant expression for the dissociation reaction:

K_a = [C9H8NO3^-][H^+]/[C9H8NO3]

where K_a is the acid dissociation constant of hippuric acid.

At equilibrium, the concentration of C9H8NO3^- is equal to the concentration of H^+, since one C9H8NO3^- ion is produced for each H^+ ion. Therefore:

[C9H8NO3^-] = [H^+]

We can then rearrange the equilibrium constant expression to solve for [C9H8NO3^-]:

[C9H8NO3^-] = K_a[C9H8NO3]/[H^+]

The acid dissociation constant, K_a, for hippuric acid is 1.4 x 10^-5 at 25°C. We can assume that the dissociation of hippuric acid is negligible compared to its initial concentration of 0.190 M, so we can use the initial concentration of hippuric acid as [C9H8NO3] and solve for [H^+]:

K_a = [C9H8NO3^-][H^+]/[C9H8NO3]
1.4 x 10^-5 = [H^+]^2/0.190
[H^+] = 2.2 x 10^-4 M

Since [C9H8NO3^-] = [H^+], the concentration of C9H8NO3^- is also 2.2 x 10^-4 M.

Visit to know more about Concentration:-

brainly.com/question/26255204

#SPJ11

Equation chemically balanced for Aquarius solutions. When cations and anions in an aqueous solution react to generate a precipitate, an insoluble ionic solid, precipitation processes take place.

A solution of a salt that is only sparingly soluble adjusts the solubility equilibrium in the desired direction when a common cation or common anion is added. When soluble ionic chemical solutions are combined, the solubility table in Table 1 can be used to forecast if a precipitation process will take place. A single solution is created by combining multiple solutions; the finished product contains 0.2 mol Pb1CH3COO), 0.1 mol Na2S, and 0.1 mol CaCl2.

To know more about Aquarius, click here:

https://brainly.com/question/555394

#SPJ4

The new temperature of the gas inside the balloon is 63°C, that is option b is the correct answer.

To solve this problem, we can use Charles' Law formula, which states that V1/T1 = V2/T2 for a constant pressure system.

Where V1 and T1 are the initial volume and temperature, and V2 and T2 are the final volume and temperature.

Plugging in the given values, we get:

(1.90 L/21°C) = (5.70 L/T2)

Solving for T2, we get:

T2 = (5.70 L x 21.0 C) / 1.90 L

T2 = 63°C

Therefore, the new temperature of the gas inside the balloon is 63°C. The correct answer is (b)

Learn more about Charles' Law: https://brainly.com/question/16927784

#SPJ11

The volume of HCl needed to react completely Na₂CO₃ is 0.0667 liters.

To determine the volume of 3.00 M HCl needed to react completely with 0.250 L of 0.400 M Na₂CO₃, you can use stoichiometry. The balanced chemical equation for this reaction is:

2 HCl + Na₂CO₃→ 2 NaCl + H₂O + CO₂

From the balanced equation, 2 moles of HCl are required to react with 1 mole of Na₂CO₃. First, find the moles of Na₂CO₃ by multiplying the volume with the concentration (molarity):

moles of Na₂CO₃= volume (L) × molarity (M)
moles of Na₂CO₃= 0.250 L × 0.400 M = 0.100 moles

Now, use the stoichiometry to determine the moles of HCl required:

moles of HCl = moles of Na₂CO₃× (2 moles of HCl / 1 mole of Na₂CO₃)
moles of HCl = 0.100 moles × 2 = 0.200 moles

Finally, calculate the volume of 3.00 M HCl needed:

volume (L) = moles of HCl / molarity (M)
volume (L) = 0.200 moles / 3.00 M = 0.0667 L

So, 0.0667 liters of 3.00 M HCl are needed to react completely with 0.250 L of 0.400 M Na₂CO₃.

Learn more about stoichiometry here: https://brainly.com/question/30820349

#SPJ11

In a small test tube, when you combine about 6 drops of ammonium carbonate solution (NH4)2CO3 aq and about 6 drops of barium chloride solution BaCl2 aq, you will observe the formation of a white precipitate.

First, break up the reactants into ions:
(NH4)2CO3 aq → 2NH4+ (aq) + CO3^2- (aq)
BaCl2 aq → Ba^2+ (aq) + 2Cl- (aq)

Switch the cations:
NH4+ (aq) + Cl- (aq) → NH4Cl (aq)
Ba^2+ (aq) + CO3^2- (aq) → BaCO3 (s)

Use the criss-cross method to get the balanced formulas for the products:
NH4Cl (aq)
BaCO3 (s)

Write the balanced molecular equation for this reaction, including phase labels:
(NH4)2CO3 (aq) + BaCl2 (aq) → 2NH4Cl (aq) + BaCO3 (s)

Write the complete ionic equation for this reaction:
2NH4+ (aq) + CO3^2- (aq) + Ba^2+ (aq) + 2Cl- (aq) → 2NH4+ (aq) + 2Cl- (aq) + BaCO3 (s)

Write the net ionic equation for this reaction:
CO3^2- (aq) + Ba^2+ (aq) → BaCO3 (s)

The precipitate in this reaction is barium carbonate (BaCO3) solution, which is a white solid.

Learn more about solutions at  brainly.com/question/30620786

#SPJ11

The speed of the proton after being accelerated from rest through a 4.9×10^7 V potential difference is approximately 1.54×10^7 m/s.

To calculate the speed of a proton after being accelerated from rest through a 4.9×10^7 V potential difference, we can use the formula for the kinetic energy of a charged particle:

KE = q × V

Where q is the charge of the particle and V is the potential difference.

For a proton, q = +1.6×10^-19 C, the kinetic energy gained by the proton is:

KE = (1.6×10^-19 C) x (4.9×10^7 V)

     = 7.84×10^-12 J

Now, we can use the formula for kinetic energy to calculate the speed of the proton:

KE = (1/2)mv^2

Where m is the mass of the proton, and v is its speed. The mass of a proton is 1.67×10^-27 kg.

Substituting the values, we get:

7.84×10^-12 J = (1/2) (1.67×10^-27 kg)(v^2)

Solving for v (speed), we get:

v = √[(2 x 7.84×10^-12 J) / (1.67×10^-27 kg)]

v = 1.54×10^7 m/s

To know more about speed in an accelerating body, click on the below link:

https://brainly.com/question/19891482

#SPJ11