Answer:
P1V1=P2V2P1V1/P2
=200×4.50/760
=1.1842
Discuss the similarities and differences in the behavior of the metals tested with water relative to their positions in the periodic table. Compare behavior within a family and in the same period. What would you predict to be the relative reactivities of cesium and lithium with water? Compare the reactivities of Groups IIA and IIIA with dilute acids.
a. Metals can react with water to form metal hydroxide and hydrogen gas.
b. Within a family, the reactivity of metals with water increases as you move down the group.
c. Within the same period, the reactivity of metals with water generally decreases as you move from left to right.
d. As for the relative reactivities of cesium and lithium with water, cesium is more reactive than lithium due to its larger size and lower ionization energy.
e. The reactivities of Groups IIA and IIIA with dilute acids are also different.
The reactivity of a metal with water depends on its position in the periodic table. Metals in Group IA (alkali metals) are highly reactive with water, while metals in Group IIA (alkaline earth metals) are less reactive. Metals in Group IIIA have a lower reactivity with water than metals in Group IA and IIA.
The reactivity of metals with water increases as you move down the group. For example, lithium reacts slowly with water, while cesium reacts explosively with water. This trend is due to the increasing size of the atoms and the decreasing ionization energy as you move down the group.
The reactivity of metals with water generally decreases as you move from left to right. For example, sodium reacts more vigorously with water than magnesium. This trend is due to the increasing electronegativity of the elements as you move from left to right, making it harder for the metal atom to lose electrons and form positive ions.
Metals in Group IIA react with dilute acids to form a metal salt and hydrogen gas, while metals in Group IIIA do not react with dilute acids. This is because Group IIA metals have a lower ionization energy and are more likely to form positive ions in solution, while Group IIIA metals have a higher ionization energy and are less likely to form positive ions.
Learn more about reactivities: https://brainly.com/question/30843855
#SPJ11
Chloroacetic acid, CICH2CO2H, is a stronger acid than acetic acid. Which one of the following best explains this? Select an answer and submit. For keyboard navigation, use the up/down arrow keys to select an answer. a. CICH2C02" is more stable than CH3C02" because of the electron-withdrawing Cl. b. CICH2CO2 is more soluble in water than CH3CO2" because of the CI. с. CICH2CO2 is more stable than CH3CO2" because of an additional resonance form. d. CICH2C02" is more stable than CH3C02" because of hydrogen bonding
The correct answer is (c) CICH2CO2 is more stable than CH3CO2" because of an additional resonance form.
The acidity of a carboxylic acid depends on the stability of the conjugate base formed when the acid donates a proton. The more stable the conjugate base, the stronger the acid. In this case, the conjugate base of chloroacetic acid, CICH2CO2-, is more stable than the conjugate base of acetic acid, CH3CO2-.
This is due to the presence of an additional resonance form in the conjugate base of chloroacetic acid, which is not present in the conjugate base of acetic acid. The Cl atom in chloroacetic acid withdraws electron density from the carbonyl carbon, making the double bond between the carbon and oxygen stronger. This allows for delocalization of the negative charge over two oxygen atoms and the carbon atom, leading to an additional resonance form.
In contrast, the conjugate base of acetic acid has only one resonance form, where the negative charge is localized on the oxygen atom. Therefore, the conjugate base of chloroacetic acid is more stable than the conjugate base of acetic acid, making chloroacetic acid a stronger acid. The correct answer is (c).
For more such questions on resonance
https://brainly.com/question/11331041
#SPJ11
14h (aq) cr2o72-(aq) 3ni(s) --> 2cr3 (aq) 3ni2 (aq) 7h2o(l) in the above reaction, a piece of solid nickel is added to a solution of potassium dichromate. how many moles of electrons are transferred when 1 mole of potassium dichromate is mixed with 3 mol of nickel?
A total of 18 moles of electrons are transferred when 1 mole of potassium dichromate is mixed with 3 moles of nickel.
The balanced chemical equation for the given reaction is:
14H+ (aq) + Cr2O7 2- (aq) + 3Ni (s) → 2Cr3+ (aq) + 3Ni2+ (aq) + 7H2O (l)
From the equation, we can see that 6 moles of electrons are transferred per mole of Ni (s). Therefore, when 3 moles of nickel react, 18 moles of electrons are transferred.
To determine the number of moles of electrons transferred when 1 mole of potassium dichromate is mixed with 3 moles of nickel, we need to first calculate the limiting reactant. The balanced equation shows that 3 moles of nickel require 1 mole of potassium dichromate to react completely. Therefore, 1 mole of potassium dichromate will react with 3 moles of nickel.
As we know that 18 moles of electrons are transferred when 3 moles of nickel react, we can conclude that 6 moles of electrons are transferred when 1 mole of nickel reacts. Therefore, when 1 mole of potassium dichromate is mixed with 3 moles of nickel, a total of 6 x 3 = 18 moles of electrons are transferred.
In summary, 18 moles of electrons are transferred when 1 mole of potassium dichromate is mixed with 3 moles of nickel.
for more such question on moles
https://brainly.com/question/28037816
#SPJ11
given that you determined the molarity of potassium hydeogen phthalate in 250.0 ml of the hydrogen phthalate buffer to be 0.0393 m, calculate the pH of the potassium hydrogen phthalate buffer, before the addition of a base or an acid.
The pH of the potassium hydrogen phthalate buffer before the addition of a base or an acid is equal to its pKa, which is 5.51.
How to calculate the pH of solution?To calculate the pH of the potassium hydrogen phthalate buffer before the addition of a base or an acid, you'll need to consider the molarity of the buffer solution and the pKa of potassium hydrogen phthalate. The pKa value for potassium hydrogen phthalate is 5.51. We can use the Henderson-Hasselbalch equation to determine the pH of the buffer:
pH = pKa + log ([A-]/[HA])
Given that the buffer is not yet titrated with any acid or base, the ratio of [A-]/[HA] is 1. Therefore, the equation becomes: pH = pKa + log (1)
Since the log (1) is 0, the equation simplifies to:
pH = pKa = 5.51
To know more about Henderson-Hasselbach Equation:
https://brainly.com/question/22278201
#SPJ11
Scoring: You must get all matches correct to get credit Identify the following structural features as either similarities or difference between a triacylglycerol and a phosphatidylserine. Clear All There is an esterified phosphoric acid molety. Structural difference There are two ester linkages formed between glycerol and carboxylic acids Structural similarity The structure contains one glycerol unit. Submit Answer Try Another Version 1tom attempt rontaining
To identify the structural features as either similarities or differences between a triacylglycerol and a phosphatidylserine.
1. Esterified phosphoric acid moiety: This is a structural difference between a triacylglycerol and a phosphatidylserine. Triacylglycerols do not have a phosphoric acid moiety, while phosphatidylserines do.
2. Two ester linkages formed between glycerol and carboxylic acids: This is a structural similarity between a triacylglycerol and a phosphatidylserine. Both molecules have ester linkages between the glycerol backbone and carboxylic acids (fatty acids in triacylglycerols and fatty acids + phosphoric acid in phosphatidylserines).
3. The structure contains one glycerol unit: This is also a structural similarity between a triacylglycerol and a phosphatidylserine. Both molecules have a glycerol backbone as a structural component.
In summary, the esterified phosphoric acid moiety is a structural difference, while the presence of two ester linkages formed between glycerol and carboxylic acids, and the presence of one glycerol unit are both structural similarities between a triacylglycerol and a phosphatidylserine.
To know more about triacylglycerol :
https://brainly.com/question/13020914
#SPJ11
Calculate the pH of each of the following strong acid solutions. Part A. 0.220 g of hclo3 in 2.50 l of solution. Express the pH of the solution to three decimal places.
pH of the solution is 2.982
HClO₃ is a strong acid and dissociates completely in water, which means that all the HClO₃ molecules will ionize to form H⁺ ions and ClO₃⁻ ions. The balanced chemical equation for the dissociation of HClO₃ is:
HClO₃ + H₂O → H₃O+ + ClO₃⁻
To calculate the pH of the solution, we need to know the concentration of H⁺ ions in the solution, which we can calculate from the amount of HClO and the volume of the solution.
First, we need to convert the mass of HClO₃ to moles:
moles HClO₃ = mass / molar mass
moles HClO₃ = 0.220 g / 84.46 g/mol
moles HClO₃ = 0.002605 mol
Next, we need to calculate the concentration of H⁺ ions in the solution:
[H+] = moles HClO₃ / volume of solution
[H+] = 0.002605 mol / 2.50 L
[H+] = 0.001042 M
Finally, we can calculate the pH of the solution using the formula:
pH = -log[H⁺]
pH = -log(0.001042)
pH = 2.982
Therefore, the pH of the solution of 0.220 g of HClO₃ in 2.50 L of solution is 2.982.
To know more about pH here:
https://brainly.com/question/491373#
#SPJ11
The balanced chemical equation for the combustion of hydrogen and oxygen to give water is 2 H2 + O2 --> 2 H2O
Complete the following sentence to describe the number of moles of each reactant involved in the combustion of hydrogen:
___ moles of hydrogen react with ___ moles of oxygen to give moles of water
In the combustion of hydrogen and oxygen , 2 moles of hydrogen react with 1 mole of oxygen to give 2 moles of water.
Combustion is a chemical process in which a substance reacts rapidly with oxygen and results in production of heat. When the hydrogen molecule is burned (hydrogen combustion) with oxygen gas, the bonds between two hydrogen atoms are broken as well as those between oxygen atoms to make up bonds between hydrogen and oxygen atoms and hence producing water as product. This is the balanced chemical equation for the process: 2 H2 + O2 --> 2 H2O, hence, 2 moles of hydrogen react with 1 mole of oxygen to give 2 moles of water.
Learn more about combustion : https://brainly.com/question/23992512
#SPJ11
Calculate the H for the reaction: NO2 (g) + CO (g) CO2 (g) + NO (g) using the standard enthalpies of formation:
NO = 90 kJ/mol
NO2 = 34 kJ/mol
CO = –111 kJ/mol
CO2 = –394 kJ/mol
A) 339 kJ B) 381 kJ C) –227 kJ D) –339 kJ E) 227 kJ
Answer is C, but how?
The ΔH for the given reaction is -227 kJ. The standard enthalpy of formation is the change in enthalpy when one mole of a substance is formed from its elements in their standard states under standard conditions.
To do this, we'll use the following formula:
ΔH_reaction = Σ ΔH_f(products) - Σ ΔH_f(reactants)
First, let's find the ΔH_f values for all the compounds involved in the reaction:
NO = 90 kJ/mol
NO2 = 34 kJ/mol
CO = -111 kJ/mol
CO2 = -394 kJ/mol
Now, plug these values into the formula:
ΔH_reaction = [(ΔH_f(CO2) + ΔH_f(NO)) - (ΔH_f(NO2) + ΔH_f(CO))]
ΔH_reaction = [(-394 kJ/mol + 90 kJ/mol) - (34 kJ/mol - 111 kJ/mol)]
Now, perform the calculations inside the brackets:
ΔH_reaction = [(-304 kJ/mol) - (-77 kJ/mol)]
Lastly, subtract the values:
ΔH_reaction = -227 kJ/mol
Therefore, the ΔH for the given reaction is -227 kJ.
To learn more about standard enthalpy please visit:
https://brainly.com/question/29556033
#SPJ11
what is the hybridization on the n atom of methylamine (ch3nh2)? draw the complete lewis structure. group of answer choices sp sp2 sp3 sp3d sp3d2 flag question: question 4 question 4
The nitrogen atom in methylamine (CH3NH2) is sp3 hybridized.
To draw the complete Lewis structure, we start by counting the total number of valence electrons in the molecule. Therefore, the total number of valence electrons in the molecule is:
4 + 3(1) + 5 = 12
We then arrange the atoms in the molecule so that the nitrogen atom is in the center, with the three hydrogen atoms and one carbon atom bonded to it. The Lewis structure for methylamine is:
H
. . |
H - N - C - H
| |
H H
To determine the hybridization of the nitrogen atom, we count the number of regions of electron density around the atom, which includes both the lone pair and the bonds to the hydrogen and carbon atoms. In this case, there are four regions of electron density around the nitrogen atom, which corresponds to sp3 hybridization.
learn more about hybridization,
https://brainly.com/question/22765530
#SPJ11
the solubility of silver phosphate, ag3po4, at 25°c is 1.59 × 10–5 mol/l. what is the ksp for the silver phosphate at 25°c?
a. 1.09x10^-13 b. 1.73x10^-18 c. 7.58x10^-10 d. 6.39x10^-20
The Ksp for the silver phosphate at 25°c is (a) 1.09 × 10⁻¹³.
To find the Ksp, we first need to write the balanced dissociation equation and set up an expression for the solubility product:
Ag₃PO₄(s) ↔ 3Ag⁺(aq) + PO₄³⁻(aq)
If the solubility of Ag₃PO₄ is 1.59 × 10⁻⁵ mol/L, then the concentration of Ag⁺ ions will be 3 times that, and the concentration of PO₄³⁻ ions will be equal to the solubility.
[Ag⁺] = 3 × 1.59 × 10⁻⁵ mol/L = 4.77 × 10⁻⁵ mol/L
[PO₄³⁻] = 1.59 × 10⁻⁵ mol/L
Now, we can write the Ksp expression:
Ksp = [Ag⁺]³ × [PO₄³⁻] = (4.77 × 10⁻⁵)³ × (1.59 × 10⁻⁵)
Ksp ≈ 1.09 × 10⁻¹³
So, the correct answer is (a) 1.09 × 10⁻¹³.
Learn more about solubility product here: https://brainly.com/question/29597105
#SPJ11
hat would happen to the normality if you titrated too much naoh into the flask? explain your reasoning to whether the normality would decrease, increase, or stay the same
Titrating too much NaOH into the flask would cause the normality of the solution to decrease due to the increase in volume without a corresponding increase in the number of equivalents (moles of OH-) being added.
To explain this reasoning, let's consider the following steps:
1. When titrating NaOH into the flask, you are adding more moles of hydroxide ions (OH-) to the solution.
2. As you add more NaOH, the concentration of the hydroxide ions in the solution will increase.
3. Normality is defined as the number of equivalents of solute per liter of solution (N = equivalents/L).
4. In this case, an "equivalent" refers to the number of moles of hydroxide ions (OH-).
5. As you continue to add NaOH beyond the equivalence point, the volume of the solution in the flask will also increase.
6. Because normality takes both the number of equivalents (moles of OH-) and the volume of the solution into account, increasing the volume without adding more equivalents of the solute will result in a lower normality.
To know more about "Titrating" refer here:
https://brainly.com/question/29358403#
#SPJ11
Acetic acid (pka = 4.76) is 4% dissociated in an aqueous solution at 25°C. g) What was the initial concentration (molarity) of acetic acid? h) What is the pH? i) What is the van't Hoff i factor?
The initial concentration (molarity) of acetic acid is 0.0462 M. The pH of the solution is 1.75, the van't Hoff i factor for acetic acid is 2,
The dissociation reaction of acetic acid in water is:
CH₃COOH + H₂O ⇌ CH₃COO- + H₃O+
The equilibrium constant expression for this reaction is:
Ka = [CH₃COO⁻][H₃O⁺]/[CH₃COOH]
Given that acetic acid is 4% dissociated in solution, we can assume that the concentration of acetic acid remaining is 96% of the initial concentration, and the concentration of both acetate and hydronium ions formed is 4% of the initial concentration.
g) What was the initial concentration (molarity) of acetic acid?
Let's assume that the initial concentration of acetic acid is x M. Then, the concentration of acetate and hydronium ions formed is 0.04x M. The concentration of acetic acid remaining is (1-0.04)x M = 0.96x M.
Using the equilibrium constant expression, we can write:
Ka = [CH₃COO⁻][H3O⁺]/[CH₃COOH]
Ka = (0.04x)(0.04x)/(0.96x)
Ka = 0.00176
We know that the equilibrium constant expression for a weak acid can be written as Ka = [H3O⁺][A-]/[HA]. In this case, HA represents acetic acid and A- represents acetate ion. Since the concentration of acetate and hydronium ions formed is 0.04x M, and assuming that they are equal due to the 1:1 stoichiometry of the dissociation reaction, we can write:
Ka = [H3O⁺][CH₃COO⁻]/[CH₃COOH]
0.00176 = (0.04x)/(0.96x)
x = 0.0462 M
Therefore, the initial concentration (molarity) of acetic acid is 0.0462 M.
h) What is the pH?
The concentration of hydronium ions formed in the solution can be calculated using the equation:
[H3O⁺] = Ka[CH₃COOH]/[CH₃COO⁻]
[H3O⁺] = (0.00176)(0.0462)/(0.00462)
[H3O⁺] = 0.0177 M
The pH of the solution can be calculated using the equation:
pH = -log[H3O⁺]
pH = -log(0.0177)
pH = 1.75
Therefore, the pH of the solution is 1.75.
i) What is the van't Hoff i factor?
The van't Hoff i factor represents the number of particles that are formed when a solute dissolves in a solvent. In this case, acetic acid is a weak acid, which means that it partially dissociates in water to form acetate and hydronium ions. Therefore, the van't Hoff i factor for acetic acid is 2, since 2 particles are formed when it dissolves in water (one molecule of acetic acid and one hydronium ion).
Know more about molarity here: https://brainly.com/question/2817451
#SPJ4
what is the specific heat of benzene if 3450 j of heat is added to a 150. g sample of benzene and its temperature increases from 22.5°c to 35.8°c?
To find the specific heat of benzene, we can use the formula: Q = mcΔT where Q is the heat added (3450 J), m is the mass of the benzene sample (150 g).
c is the specific heat capacity we want to find, and ΔT is the temperature increase (35.8°C - 22.5°C). First, let's calculate ΔT: ΔT = 35.8°C - 22.5°C = 13.3°C Now, we can rearrange the formula to find c: c = Q / (mΔT) c = 3450 J / (150 g × 13.3°C) c ≈ 1.73 J/(g°C)
So, the specific heat capacity of benzene is approximately 1.73 J/(g°C). Plugging in the given values: 3450 J = 150 g * c * (35.8°C - 22.5°C) Solving for c: c = 1.74 J/g°C Therefore, the specific heat of benzene is 1.74 J/g°C if 3450 J of heat is added to a 150 g sample of benzene and its temperature increases from 22.5°C to 35.8°C.
To know more about temperature click here
brainly.com/question/29072206
#SPJ11
Which reactant for adding carbon group to biotin?
The reactant for adding a carbon group to biotin is usually a biotin carboxylase enzyme, which uses ATP and bicarbonate as co-factors to add a carboxyl group to the biotin molecule. This process is known as biotinylation and is an essential step in the activation of certain enzymes involved in various metabolic pathways.
Biotin, also known as vitamin B7 or vitamin H, is a water-soluble vitamin that is important for various metabolic processes in the body. It is involved in the metabolism of carbohydrates, fats, and proteins, and plays a key role in maintaining healthy skin, hair, and nails. Biotin is also essential for the normal functioning of the nervous system and is sometimes used as a dietary supplement to help improve the health of hair, skin, and nails. Biotin is found in a variety of foods, including egg yolks, liver, nuts, and whole grains.
Visit here to learn more about biotin brainly.com/question/8906658
#SPJ11
Calculate the pH of the resulting solution if 22.0 mL of 0.220 M HCl(aq) is added to (a) 12.0 mL of 0.320 M NaOH(aq). (b) 32.0 mL of 0.220 M NaOH(aq).
When 22.0 mL of 0.220 M [tex]H_{Cl}[/tex](aq) is added to (a) 12.0 mL of 0.320 M [tex]Na_{OH}[/tex](aq), we have a reaction between the acid and base: [tex]H_{Cl}[/tex](aq) + [tex]Na_{OH}[/tex](aq) → [tex]Na_{Cl}[/tex](aq) + [tex]H_{2}O[/tex](l)
The balanced equation shows that one mole of [tex]H_{Cl}[/tex] reacts with one mole of [tex]Na_{OH}[/tex] to produce one mole of [tex]Na_{Cl}[/tex]and one mole of water. The limiting reagent in this case is [tex]Na_{OH}[/tex], as it is present in smaller amount.
First, we need to calculate the amount of [tex]Na_{OH}[/tex]:
0.0120 L × 0.320 mol/L = 0.00384 mol [tex]Na_{OH}[/tex]
Next, we need to calculate the amount of [tex]H_{Cl}[/tex] added:
0.0220 L × 0.220 mol/L = 0.00484 mol [tex]H_{Cl}[/tex]
Since [tex]Na_{OH}[/tex]is the limiting reagent, all of it will be consumed in the reaction. Therefore, the amount of [tex]Na_{OH}[/tex] that remains after the reaction is: 0.00384 mol - 0.00484 mol = -0.001 mol
The negative result indicates that there is no excess [tex]Na_{OH}[/tex], and that all of it has reacted with the [tex]H_{Cl}[/tex]. The amount of [tex]Na_{Cl}[/tex] produced is equal to the amount of [tex]H_{Cl}[/tex] added, which is:
0.00484 mol [tex]Na_{Cl}[/tex]
The volume of the final solution is the sum of the volumes of the acid and base solutions:
0.0120 L + 0.0220 L = 0.0340 L
The concentration of [tex]Na_{Cl}[/tex]is:
0.00484 mol / 0.0340 L = 0.142 M
The pH of a 0.142 M [tex]Na_{Cl}[/tex] solution is approximately 7, which means that the resulting solution is neutral.
(b) When 22.0 mL of 0.220 M [tex]H_{Cl}[/tex](aq) is added to 32.0 mL of 0.220 M [tex]Na_{OH}[/tex](aq), we have a similar neutralization reaction:
[tex]H_{Cl}[/tex](aq) + [tex]Na_{OH}[/tex](aq) → [tex]Na_{Cl}[/tex](aq) + [tex]H_{2}O[/tex](l)
The balanced equation shows that one mole of [tex]H_{Cl}[/tex] reacts with one mole of [tex]Na_{OH}[/tex]to produce one mole of [tex]Na_{Cl}[/tex] and one mole of water. In this case, both the acid and base solutions have the same concentration, so we need to calculate the amount of each reagent:
Amount of [tex]H_{Cl}[/tex] = 0.0220 L × 0.220 mol/L = 0.00484 mol
Amount of [tex]Na_{OH}[/tex]= 0.0320 L × 0.220 mol/L = 0.00704 mol
Since the stoichiometry of the reaction is 1:1, the limiting reagent is the one that is present in smaller amount, which is HCl in this case. Therefore, all of the [tex]H_{Cl}[/tex] will react with the [tex]Na_{OH}[/tex] , leaving an excess of [tex]Na_{OH}[/tex].
The amount of [tex]Na_{Cl}[/tex] produced is equal to the amount of [tex]H_{Cl}[/tex] added, which is:
0.00484 mol [tex]Na_{Cl}[/tex]
The amount of [tex]Na_{OH}[/tex] that remains after the reaction is:
0.00704 mol - 0.00484 mol = 0.00220 mol
The volume of the final solution is the sum of the volumes of the acid and base solutions:
0.0220 L + 0.0320 L = 0.0540 L
The concentration of [tex]Na_{Cl}[/tex] is:
0.00484 mol / 0.0540 L = 0.090 M
The concentration of excess [tex]Na_{OH}[/tex] is:
0.00220 mol / 0.0540 L = 0
To know more about pH
brainly.com/question/15289741
#SPJ11
Given the equilibrium 3 A (g) + B (g) + 2C (g) = D (g) + 2 E (g), which change will shift the equilibrium to the right? - increasing the pressure on the system - increasing the concentration of D - decreasing the concentration of B - decreasing the pressure on the system
Increasing the pressure on the system will shift the equilibrium to the right, favoring the formation of products D and E.
According to Le Chatelier's principle, an increase in pressure will shift the equilibrium towards the side with fewer moles of gas. Since there are fewer moles of gas on the product side, an increase in pressure will favor the forward reaction, producing more D and E. Conversely, decreasing the pressure will shift the equilibrium towards the side with more moles of gas, favoring the reverse reaction. Increasing the concentration of D will not have an effect on the equilibrium because it is a product, and decreasing the concentration of B will also not have an effect because it is a reactant.
learn more about equilibrium here:
https://brainly.com/question/30807709
#SPJ11
Propose a structure for a compound that is consistent with the following data: MS: M+ 74 m/zIR: 3300 (broad), 3000, 1710 (strong) cm^–1
Based on the given data, the compound can be proposed as a ketone with a molecular ion peak at m/z 74. The IR spectrum shows a broad peak at 3300 cm^-1 indicating the presence of an O-H group, and strong peaks at 3000 and 1710 cm^-1 suggesting the presence of C-H and C=O groups, respectively. Therefore, the proposed structure for the compound is a methyl ethyl ketone (MEK) with the formula CH3COCH2CH3.
Based on the provided data, the compound with a molecular ion peak (M+) at 74 m/z in the mass spectrum, and IR absorption bands at 3300 cm^−1 (broad), 3000 cm^−1, and 1710 cm^−1 (strong) can be proposed as ethyl acetate (CH3COOCH2CH3).
The IR absorptions can be explained as follows:
- 3300 cm^−1 (broad) is indicative of an O-H stretching vibration, which suggests the presence of a carboxylic acid. However, due to the molecular weight of 74, it is more likely that this peak represents hydrogen bonding between ethyl acetate molecules.
- 3000 cm^−1 is associated with C-H stretching vibrations in alkyl groups (CH2 and CH3).
- 1710 cm^−1 (strong) is characteristic of a carbonyl (C=O) stretching vibration, which is consistent with an ester functional group.
Therefore, the compound is ethyl acetate (CH3COOCH2CH3) as its structure matches the given data.
To learn more about compound visit;
https://brainly.com/question/13516179
#SPJ11
Whats the difference between zinc amino acid chelate with other type of zinc ( gluconate, picolinate, citrate, etc)?
A zinc supplement known as zinc amino acid chelate binds the mineral to amino acids, typically glycine, to increase the body's ability to absorb it. Zinc amino acid chelate differs from other zinc supplements including gluconate, picolinate, and citrate in terms of both chemical makeup and rate of absorption.
For instance, zinc is combined with gluconic acid, a naturally occurring substance present in fruits and honey, to create zinc gluconate. Zinc is combined with picolinic acid, a byproduct of the amino acid tryptophan, to create zinc picolinate. On the other hand, zinc is combined with citric acid, a naturally occurring substance present in citrus fruits, to create zinc citrate.
While the body can absorb zinc from all of these kinds of supplementation, their rates of absorption may vary. For instance, it has been demonstrated that zinc amino acid chelate has a better rate of absorption than zinc gluconate and zinc citrate.
Additionally, due to individual variances in intestinal health and heredity, some persons may be more tolerant to one form of zinc supplement than another. As a result, it is advised to speak with a healthcare professional before selecting a particular zinc supplement.
learn more about chelate here
https://brainly.com/question/15242975
#SPJ1
bond polarity and molecular shape determine molecular polarity, which is measured as a dipole moment. group of answer choices true false
A molecule with a net dipole moment is considered polar,a molecule with no net dipole moment is considered nonpolar.
What is dipole moment?True, bond polarity and molecular shape determine molecular polarity, which is measured as a dipole moment. Bond polarity arises from differences in electronegativity between atoms in a bond, leading to an uneven distribution of electron density and creating a dipole.
Molecular polarity is the overall polarity of the entire molecule, considering both the bond polarities and the molecular shape. A molecule with a net dipole moment is considered polar, while a molecule with no net dipole moment is considered nonpolar.
Learn more about dipole moment
brainly.com/question/14140953
#SPJ11
A molecule with a net dipole moment is considered polar,a molecule with no net dipole moment is considered nonpolar.
What is dipole moment?True, bond polarity and molecular shape determine molecular polarity, which is measured as a dipole moment. Bond polarity arises from differences in electronegativity between atoms in a bond, leading to an uneven distribution of electron density and creating a dipole.
Molecular polarity is the overall polarity of the entire molecule, considering both the bond polarities and the molecular shape. A molecule with a net dipole moment is considered polar, while a molecule with no net dipole moment is considered nonpolar.
Learn more about dipole moment
brainly.com/question/14140953
#SPJ11
in nmr spectroscopy, what are the advantages of using a magnet with as great a field strength as possible?
A higher field strength in NMR spectroscopy results in increased resolution, sensitivity, and the ability to study larger molecules.
In NMR spectroscopy, a higher magnetic field strength leads to better spectral resolution due to the narrower chemical shift range of each nucleus. This results in sharper and better-resolved spectral lines, allowing for easier identification and analysis of compounds. Additionally, higher field strengths provide increased sensitivity, allowing for the detection of smaller sample quantities and more accurate measurement of sample concentrations. The increased field strength also enables the study of larger molecules, as it provides a higher signal-to-noise ratio and better resolution of overlapping signals. Overall, the use of a magnet with as great a field strength as possible improves the accuracy and precision of NMR measurements and allows for the study of a wider range of compounds.
learn more about spectroscopy here:
https://brainly.com/question/28523860
#SPJ11
how many moles of copper are there in the copper sample shown!
The number of mole of copper present in the copper sample shown in the diagram is 1.5 mole (option A)
How do i determine the mole of copper in the sample?We can obtain the number of mole of copper present in sample as follow:
Mass of copper in sample = 95.33 grams Molar mass of copper = 63.55 g/mol Mole of copper =?Mole is defined as:
Mole = mass / molar mass
Inputting the mass and molar mass of copper, we have:
Mole of copper = 95.33 / 63.55
Mole of Copper = 1.5 mole
Thus, we can conclude that the number of mole of copper is 1.5 mole (option A)
Learn more about mole:
https://brainly.com/question/13314627
#SPJ1
What is the standard free energy of formation of 1.00 mol of CuO(s)?
From the following formula ΔG°f = ΣnΔG°f(products) - ΣmΔG°f(reactants), the standard free energy of formation of 1.00 mol of CuO(s) is -157.3 kJ.
The standard free energy of formation of 1.00 mol of CuO(s) can be calculated using the equation: ΔG°f = ΣnΔG°f(products) - ΣmΔG°f(reactants)
;where ΔG°f is the standard free energy of formation, n and m are the stoichiometric coefficients of the products and reactants respectively.
The standard free energy of formation of CuO(s) is -157.3 kJ/mol. Therefore, the standard free energy of formation of 1.00 mol of CuO(s) can be calculated as:
ΔG°f = (1 mol) (-157.3 kJ/mol) = -157.3 kJ
So, the standard free energy of formation of 1.00 mol of CuO(s) is -157.3 kJ.
The standard free energy of formation (ΔGf°) of a compound is the change in free energy when 1.00 mol of the substance is formed from its constituent elements under standard conditions (1 atm pressure and 298 K temperature). For CuO(s), this refers to the formation of 1.00 mol of solid copper(II) oxide from its elements, copper (Cu) and oxygen (O₂).
To find the ΔGf° value for CuO(s), you can refer to a table of standard free energies of formation. According to such tables, the ΔGf° for CuO(s) is approximately -129.7 kJ/mol. This negative value indicates that the formation of CuO(s) from its elements is a spontaneous process under standard conditions.
Visit here to learn more about standard free energy : https://brainly.com/question/6556762
#SPJ11
What monoalkylated product(s) would one expect to obtain if benze were alkylated with n-butylchloride?
If benzene were alkylated with n-butyl chloride, the most likely product formed would be n-butylbenzene, which is a monoalkylated product. This reaction is an example of Friedel-Crafts alkylation, which involves the use of a Lewis acid catalyst, such as aluminum chloride (AlCl₃).
The reaction can lead to the formation of multiple monoalkylated products due to the possibility of substitution at different positions on the benzene ring.
However, in the case of n-butyl chloride, the major product obtained would be n-butylbenzene, which is formed by substitution of the butyl group at the ortho or para position on the benzene ring.
This is because these positions are more accessible to the incoming alkyl group and also stabilize the intermediate carbocation formed during the reaction.
The other possible monoalkylated products that could be formed are sec-butylbenzene and tert-butylbenzene, which are formed by substitution of the butyl group at the meta position on the benzene ring.
However, these products are less favored due to steric hindrance from the other substituents on the ring.
To learn more about alkylated here:
https://brainly.com/question/29031148
#SPJ11
a 25.0 ml sample of 0.150 m hydrazoic acid, hn3, is titrated with a 0.211 m naoh solution. what is the ph after 10.18 ml of base is added? the ka of hydrazoic acid is 1.8 x 10−5.
Hydrazoic acid ([tex]HN_{3}[/tex]) is a weak acid with a Ka value of 1.8 x [tex]10^{-5}[/tex] When it reacts with NaOH, it undergoes a neutralization reaction, producing water and sodium azide ([tex]NaN_{3}[/tex]). The balanced equation for the reaction is:
[tex]HN_{3} (aq) + NaOH(aq)[/tex] → [tex]NaN_{3} (aq) + H_{2} O(l)[/tex]
To determine the pH after adding 10.18 mL of 0.211 M NaOH to a 25.0 mL sample of 0.150 M [tex]HN_{3}[/tex], we can use the Henderson-Hasselbalch equation, which relates the pH to the acid dissociation constant (Ka) and the ratio of the concentrations of the acid and its conjugate base.
First, we need to calculate the initial concentration of [tex]HN_{3}[/tex] in the 25.0 mL sample:
0.150 M × 0.0250 L = 0.00375 mol [tex]HN_{3}[/tex]
Next, we need to calculate the number of moles of NaOH added to the solution:
0.211 M × 0.01018 L = 0.00215 mol NaOH
Since NaOH and [tex]HN_{3}[/tex] react in a 1:1 ratio, the number of moles of [tex]HN_{3}[/tex] that remain after the neutralization reaction is:
0.00375 mol - 0.00215 mol = 0.00160 mol [tex]HN_{3}[/tex]
The volume of the resulting solution is 25.0 mL + 10.18 mL = 35.18 mL.
Now we can use the Henderson-Hasselbalch equation:
pH = pKa + log([[tex]A^{-}[/tex]]/[HA])
where [[tex]A^{-}[/tex]] is the concentration of the conjugate base ([tex]NaN_{3}[/tex]) and [HA] is the concentration of the weak acid ([tex]HN_{3}[/tex]).
At the equivalence point of the titration, all of the [tex]HN_{3}[/tex] has reacted with the NaOH to form [tex]NaN_{3}[/tex], so the concentration of the conjugate base is:
[[tex]A^{-}[/tex]] = (0.00215 mol NaOH / 0.03518 L) = 0.0612 M
The concentration of the weak acid remaining after the titration is:
[HA] = (0.00160 mol [tex]HN_{3}[/tex] / 0.03518 L) = 0.0455 M
The pKa of [tex]HN_{3}[/tex] is given as 1.8 x [tex]10^-5[/tex]. Converting this to Ka gives:
Ka = [tex]10^-pKa[/tex] = 5.56 x [tex]10^{-6}[/tex]
Substituting these values into the Henderson-Hasselbalch equation gives:
pH = 4.25 + log(0.0612/0.0455) ≈ 9.13
Therefore, the pH of the solution after adding 10.18 mL of NaOH is approximately 9.13.
Learn more about Hydrazoic acid
https://brainly.com/question/13770854
#SPJ4
An unknown compound is found to have 5.34 grams of oxygen, 3.99 grams of carbon, and 0.67 grams of hydrogen. What is the empirical formula of
this compound? If the molecular mass for the compound is 60.052 amu (or g/mol), what is the molecular formula?
Make sure to show all of your work on paper for credit.
Answer:
Empirical formula:CH2O
Molecular formula:C2H4O2
Explanation: For empirical formula: Find mass to mole ratio
so we divide each of th c,h,o respective mass with their molar mass giving us the ratio of approximately 0.3:0.6:0.3
which simplifies to 1:2:1 giving us CH2O
To find the molecular formula:
We find the molar mass of empirical formula which is 30 (half the molecular mass) so we multiply the empirical formula by 2 giving us C2H4O2
P₁
T₁ V₁
T₁
P₂
=
For each of the following situations, determine which
Gas Law equation you would use to answer the
question.
V₂
P₁V₁ = P₂V₂
Situation 1- Suppose we have a 2.37-L sample of gas at 298 K that
is then heated to 354 K with no change in pressure. What is the final
volume of the sample?
Situation 2 - If a gas originally at 750 torr is cooled from 323.0 K to
273 K and the volume is kept constant, what is final pressure of the
gas?
Situation 3-A snorkeler takes a syringe filled with 16 mL of air from
the surface, where the pressure is 1.0 atm, to an unknown depth.
The volume of the air in the syringe at this depth is 7.5 ML. What is
the pressure at this depth?
Gas Law Equation
For Situation 1, where the temperature of a gas sample changes at constant pressure, you would use the Combined Gas Law equation:
P₁V₁/T₁ = P₂V₂/T₂
For Situation 2, where the volume of a gas sample is kept constant while the temperature changes, you would use the Gay-Lussac's Law equation:
P₁/T₁ = P₂/T₂
For Situation 3, where the volume of a gas sample changes at constant temperature, you would use Boyle's Law equation:
P₁V₁ = P₂V₂
Note: In all the equations above, P₁, P₂ represent the initial and final pressure respectively, V₁, V₂ represent the initial and final volume respectively, and T₁, T₂ represent the initial and final temperature respectively.
Look at the periodic table, and then order the following elements according to decreasing electronegativity: Li, K, Br, C, Cl. Rank the elements from most electronegative to least electronegative. To rank items as equivalent, overlap them.
As per the periodic table, the decreasing electronegativity of the given elements is:
Cl > Br > C > Li > K
Electronegativity is the tendency to attract electrons. In the periodic table, electronegativity increases across the period and decreases down the group.
The halogens (Cl and Br) are present in the second last group, making them the maximum electronegative. And as electronegativity decreases down the group chlorine is more electronegative than bromine.
Carbon is in p-block before halogens and is so lesser electronegative than chlorine and bromine.
Lithium and potassium are present in the first group making them highly electropositive. As electro-positivity increases down the group, potassium is more electropositive and lithium has a more electronegative character than potassium.
To know more about electronegativity, click on the below link:
https://brainly.com/question/17762711
#SPJ11
Consider a buffer made by adding 44.9 g of (CH₃)₂NH₂I to 250.0 ml of 1.42 m (CH2)2NH (kb = 5.4 x 10⁻⁴) what is the ph of this buffer?
Consider a buffer made by adding 44.9 g of (CH[tex]_2[/tex])[tex]_2[/tex]NH[tex]_2[/tex]I to 250.0 ml of 1.42 m (CH[tex]_2[/tex])[tex]_2[/tex]NH. 10.29 is the pH of this buffer.
pH is a numerical indicator of how acidic or basic aqueous or other liquid solutions are. The phrase, which is frequently used in chemistry, biology, and agronomy, converts the hydrogen ion concentration, which typically ranges between 1 and 1014 gram-equivalents per litre, into numbers between 0 and 14. The hydrogen ion concentration in pure water, which has a pH of 7, is 107 gram-equivalents per litre, making it neutral (neither acidic nor alkaline). A solution with a pH below 7 is referred to as acidic, and one with a pH over 7 is referred to as basic, or alkaline.
moles of (CH[tex]_2[/tex])[tex]_2[/tex]NH = 1.42 mol/L x 0.250 L
= 0.355 mol
(CH[tex]_2[/tex])[tex]_2[/tex]NH[tex]_2[/tex]I → (CH[tex]_2[/tex])[tex]_2[/tex]NH[tex]_2[/tex]⁺ + I⁻
Kb = [ (CH[tex]_2[/tex])[tex]_2[/tex]NH[tex]_2[/tex]⁺ ][OH⁻] / [ (CH[tex]_2[/tex])[tex]_2[/tex]NH ]
[ (CH[tex]_2[/tex])[tex]_2[/tex]NH[tex]_2[/tex]⁺ ] = Kb x [ (CH₂)₂NH ]
= (5.4 x 10⁻⁴) x 0.355 mol
= 1.92 x 10⁻⁴ M
[ (CH[tex]_2[/tex])[tex]_2[/tex]NH ] =(CH[tex]_2[/tex])[tex]_2[/tex]NH + (CH[tex]_2[/tex])[tex]_2[/tex]NH[tex]_2[/tex]⁺
= 0.355 mol + 1.92 x 10⁻⁴ mol
= 0.3552 mol
Kb = Kw / Ka
Ka = Kw / Kb
= 1.0 x 10⁻¹⁴ / 5.4 x 10⁻⁴
= 1.85 x 10⁻¹¹
pKa = -log(Ka)
= -log(1.85 x 10⁻¹¹)
= 10.73
pH = pKa + log( [ (CH₃)₂NH₂⁺ ] / [ (CH₂)₂NH ] )
pH = 10.73 + log(1.92 x 10⁻⁴ M / 0.3552 M)
= 10.29
To know more about pH, here:
https://brainly.com/question/2288405
#SPJ12
Copper is a transition metal that can have more than one charge. Write the equation of Cu+ reacting with hydrochloric acid. Then write the reaction of Cu+2 reacting with hydrochloric acid. How does the amount of hydrogen gas evolved change with each?
The amount of hydrogen gas that evolved in the reaction of Cu⁺ with HCl is less than the amount of hydrogen gas that evolved in the reaction of Cu₂⁺ with HCl.
When the Copper (I) ion (Cu⁺) reacts with hydrochloric acid (HCl), it undergoes a single replacement reaction, as follows:
Cu⁺ (aq) + HCl (aq) → CuCl (aq) + H⁺ (aq)
In this reaction, copper (I) ion is oxidized to copper (II) ion (Cu₂⁺) while hydrogen ion (H⁺) is reduced to hydrogen gas (H₂).
The reaction of Copper (II) ion (Cu₂⁺) with hydrochloric acid (HCl) also undergoes a single replacement reaction, as follows:
Cu₂⁺ (aq) + 2HCl (aq) → CuCl₂ (aq) + 2H⁺ (aq)
In this reaction, copper (II) ion is reduced to copper (I) ion (Cu⁺) while hydrogen ion (H⁺) is again reduced to hydrogen gas (H₂).
The second reaction produces twice the amount of hydrogen gas compared to the first reaction.
To learn more about hydrogen follow the link:
https://brainly.com/question/31018544
#SPJ1
Draw the missing curved arrow notation to incidate how the carbocation in left box rearranges to the carbocation in the right box.
In a carbocation rearrangement, a positively charged carbon atom (carbocation) shifts its position to a neighboring carbon atom, creating a new carbocation with a more stable structure.
This process occurs via the movement of electrons, which is represented using curved arrow notation.
To draw the missing curved arrow notation for the carbocation rearrangement, you would need to indicate the movement of the electron pair from the carbon-carbon bond to the adjacent carbon atom, leading to the formation of a new carbon-carbon bond and a more stable carbocation. The exact placement and direction of the curved arrow depend on the specific reaction mechanism and the structure of the starting and final carbocations.
To learn more about carbocation click here https://brainly.com/question/13164680
#SPJ11