The spring constant can be calculated by using the formula: Spring Constant = Force / Compression. Plugging in the given values we get the spring constant for this spring is 1200 N/m.
Hooke's Law states that the force exerted by a spring is proportional to its displacement from its equilibrium position, which is given by the equation: F = -k * x Where: - F is the force applied to the spring (in Newtons) - k is the spring constant (in N/m) - x is the displacement of the spring from its equilibrium position (in meters).
In this problem, you are given a force (F) of 600 N and a displacement (x) of 0.5 m.
Then find the spring constant (k).
To do this, we'll rearrange the formula to solve for k: k = F / x
Now, we can plug in the values:
k = 600 N / 0.5 m
k = 1200 N/m
To learn more about spring constant click here
https://brainly.com/question/14159361
#SPJ11
PRACTICE IT Use the worked example above to help you solve this problem. Find the height to which water would rise in a capillary tube with radius equal to 5.4 x 10-5 m. Assume that the contact angle between the water and the material of the tube is small enough to be considered zero. m EXERCISE HINTS: GETTING STARTED | I'M STUCK! Suppose ethyl alcohol rises 0.190 m in a thin tube. Estimate the radius of the tube, assuming the contact angle is approximately zero. (Use 0.022 N/m and 806 kg/m3 for the surface tension and density of ethyl alcohol respectively.) m Need Help? Read It
The height to which water would rise in the capillary tube with a radius of 5.4 x 10^-5 m is approximately 2.717 meters.
To find the height to which water would rise in a capillary tube with radius 5.4 x 10^-5 m, we can use the Jurin's Law formula:
h = (2 * S * cos(θ)) / (ρ * g * r)
where:
- h is the height of the liquid in the capillary tube
- S is the surface tension of the liquid (N/m) - for water, it's approximately 0.072 N/m
- θ is the contact angle between the liquid and the material of the tube - we assume it's zero, so cos(θ) = 1
- ρ is the density of the liquid (kg/m³) - for water, it's approximately 1000 kg/m³
- g is the acceleration due to gravity (9.81 m/s²)
- r is the radius of the capillary tube (5.4 x 10^-5 m)
Now we can plug in the values into the formula:
h = (2 * 0.072 * 1) / (1000 * 9.81 * 5.4 x 10^-5)
h ≈ 0.144 / (1000 * 9.81 * 5.4 x 10^-5)
h ≈ 0.144 / (5.2998 x 10^-2)
h ≈ 2.717 m
The height to which water would rise in the capillary tube with a radius of 5.4 x 10^-5 m is approximately 2.717 meters.
learn more about radius here
https://brainly.com/question/20430163
SPJ11
a 22.9 a current flows in a long, straight wire. find the strength of the resulting magnetic field at a distance of 48.1 cm from the wire.
The strength of the resulting magnetic field at a distance of 48.1 cm from the wire with a 22.9 A current is approximately 1.93 x 10⁻⁵ T.
Detailed explanation below:
The formula to be used is
B = (μ₀ * I) / (2 * π * r)
Step 1: Convert the distance to meters.
r = 48.1 cm * (1 m / 100 cm) = 0.481 m
Step 2: Plug the values into the formula.
B = (4π x 10⁻⁷ T·m/A * 22.9 A) / (2 * π * 0.481 m)
Step 3: Simplify the equation and solve for B.
B ≈ (9.274 x 10⁻⁶ T·m) / (0.481 m)
B ≈ 1.93 x 10⁻⁵ T
So, the strength of the resulting magnetic field at a distance of 48.1 cm from the wire with a 22.9 A current is approximately 1.93 x 10⁻⁵ T.
Learn more about magnetic field strength here:
"magnetic field strength at a distance in a straight conducting wire" https://brainly.com/question/18651668
#SPJ11
On Jupiter, g = 25N/kg. Calculate the energy gained when a 2kg mass is lifted by 2m.
The energy gained when a 2 kg mass is lifted by 2 m on Jupiter is 100 J.
To calculate the energy gained when a 2 kg mass is lifted by 2 m on Jupiter, we can use the formula:
E = mgh
where E is the energy gained, m is the mass, g is the acceleration due to gravity, and h is the height the object is lifted.
In this case, g = 25 N/kg, m = 2 kg, and h = 2 m. Substituting these values into the formula, we get:
E = (2 kg)(25 N/kg)(2 m) = 100 J
Therefore, the energy gained by Jupiter when a 2 kg mass is lifted by 2 m is 100 J.
To know more about Acceleration, here
brainly.com/question/12550364
#SPJ1
most dc motors with three phases only energize two of the three at any given time. which of the three phases is de-energized and why?
When a DC motor with three phases is in operation, it is true that only two of the three phases are energized at any given time. The specific phase that is de-energized depends on the position of the rotor.
The rotor is attracted to the magnetic field produced by the energized phases, so as the rotor rotates, the phases that are energized change in a specific sequence. This sequence is controlled by the motor controller and is designed to produce smooth and efficient operation of the motor.
Therefore, the phase that is de-energized at any given time is determined by the controller's sequence and the position of the rotor.
A direct current (DC) motor is a type of electric machine that converts electrical energy into mechanical energy. DC motors take electrical power through direct current, and convert this energy into mechanical rotation.
To know more about DC motor:https://brainly.com/question/15721280
#SPJ11
A standing electromagnetic wave in a certain material has a frequency 2.20 × 10^10 Hz. The nodal planes of B⃗ are 4.35 mm apart. Find the wavelength of the wave in this material. Find the distance between adjacent nodal planes of the E⃗ field. Find the speed of propagation of the wave.
The wavelength (λ) of the wave can be found using the formula λ = c/f, where c is the speed of light in vacuum (3 × 10^8 m/s) and f is the frequency. Substituting the given values, we get:
λ = (3 × 10^8 m/s)/(2.20 × 10^10 Hz) = 0.0136 m = 13.6 mm
The distance between adjacent nodal planes of the E⃗ field (which is perpendicular to the B⃗ field) is half the wavelength, so it is:
(1/2)λ = (1/2)(0.0136 m) = 0.0068 m = 6.8 mm
The speed of propagation of the wave can be found using the formula v = fλ, where v is the speed and f and λ are the frequency and wavelength, respectively. Substituting the given values, we get:
v = (2.20 × 10^10 Hz)(0.0136 m) = 2.99 × 10^8 m/s
Note that the speed of propagation in a material can be different from the speed of light in vacuum, which is why we use the given frequency and nodal plane separation to calculate the wavelength and speed in this specific material.
Given the frequency of the standing electromagnetic wave is 2.20 × 10^10 Hz, and the distance between the nodal planes of the magnetic field (B⃗) is 4.35 mm.
1. To find the wavelength of the wave in this material, we can use the relationship between the distance between nodal planes and wavelength: the distance between nodal planes is half the wavelength. Therefore:
Wavelength (λ) = 2 * distance between nodal planes
λ = 2 * 4.35 mm
λ = 8.70 mm
2. The distance between adjacent nodal planes of the electric field (E⃗) is the same as the distance between the nodal planes of the magnetic field (B⃗), which is 4.35 mm.
3. To find the speed of propagation of the wave, we can use the formula:
Speed (v) = Frequency (f) * Wavelength (λ)
v = 2.20 × 10^10 Hz * 8.70 × 10^-3 m (converting mm to meters)
v = 1.914 × 10^8 m/s
In summary, the wavelength of the wave in this material is 8.70 mm, the distance between adjacent nodal planes of the E⃗ field is 4.35 mm, and the speed of propagation of the wave is 1.914 × 10^8 m/s.
Learn more about wavelength here;
https://brainly.com/question/13533093
#SPJ11
what is the load, in amps, for a 3ø, 208v feeder supplying a load calculated at 96.75kva?
The load, in amps, for a 3-phase, 208V feeder supplying a load calculated at 96.75kVA is approximately 268.64 Amps.
To calculate the load, in amps, for a 3-phase, 208V feeder supplying a load calculated at 96.75kVA, you can use the formula,
Load (Amps) = (kVA x 1000) / (Voltage x √3)
Where,
kVA = 96.75
Voltage = 208V
√3 = 1.732 (the square root of 3)
Multiply kVA by 1000 to convert it to VA.
96.75 x 1000 = 96750VA
Multiply voltage by the square root of 3.
208 x 1.732 = 360.256
Divide the VA value by the result from step 2.
96750 / 360.256 = 268.64 Amps
A 3-phase, 208V feeder's load in amps for feeding a 96.75kVA load is roughly equal to 268.64 Amps.
Learn more about "load": https://brainly.com/question/25543272
#SPJ11
Suppose you now grab the edge of thewheel with your hand, stopping it from spinning.
What happens to themerry-go-round?
It remainsat rest.
It begins torotate counterclockwise (as observed from above).
It begins torotate clockwise (as observed from above).
The merry-go-round stops spinning. When you grab the edge of the merry-go-round wheel with your hand, the friction force between your hand and the wheel causes the wheel to slow down and eventually come to a stop.
The direction of rotation before you stopped the wheel will determine the direction it rotates after you stop it.
If the wheel was rotating clockwise before you stopped it, it will rotate counterclockwise after you stop it, and vice versa.
This is due to the conservation of angular momentum, which states that the total amount of angular momentum in a closed system remains constant unless acted upon by an external torque.
For more such questions on friction force, click on:
https://brainly.com/question/24338873
#SPJ11
This plot shows three blackbody spectra, for T = 5000, 400
The spectrum for T=4000 K
None of these spectra will produce blue light.
The spectrum for T=3000 K
The spectrum for T=5000 K
Among the blackbody spectra shown in Question 5, which one produces more light in the infrared part of the spectrum?
Group of answer choices
The spectrum for T=5000 K
None of these spectra will produce infrared light.
The spectrum for T=4000 K
The spectrum for T=3000 K
Among the blackbody spectra shown in Question 5, which one will produce more light in the X-ray part of the spectrum (at a wavelength of 0.001 microns)?
Group of answer choices
The spectrum for T=3000 K
None of these spectra will produce X-ray light.
The spectrum for T=4000 K
The spectrum for T=5000 K0, and 3000 K. Which of these spectra produces more light in the blue part of the visible spectrum?
None of these spectra will produce significant X-ray light, as the temperatures are not high enough to emit light at such short wavelengths (0.001 microns).
The spectrum for T=5000 K produces more light in the blue part of the visible spectrum.
The spectrum for T=5000 K produces more light in the blue part of the visible spectrum.
Among the blackbody spectra shown in Question 5, the spectrum for T=3000 K produces more light in the infrared part of the spectrum.
None of these spectra will produce significant X-ray light, as the temperatures are not high enough to emit light at such short wavelengths (0.001 microns).
To know more about visible spectrum. click here:
brainly.com/question/18704022
#SPJ11
despite contacting the glacier sample boundary at an angle larger than the critical angle, why is the first incident laser beam still refracted?
Despite contacting the glacier sample boundary at an angle larger than the critical angle, the first incident laser beam is still refracted as the Total internal refraction condition is not met.
Critical angle: it is the angle of incidence where the angle of refraction becomes 90 degrees.
The Total internal reflection (TIR) is a phenomenon that takes place when the two conditions are fulfilled.
First: a light ray is traveling in the more dense medium and approaching the less-dense medium.
Second: the angle of incidence for the light ray is greater than the critical angle.
Here, the second condition is met, but the first condition is not met.
Hence, the first incident laser beam is still refracted as the Total internal refraction condition is not met.
To learn more about Total internal reflection :
https://brainly.com/question/13088998
#SPJ12
in a collection of these objects excited by an electron beam, all five states are occupied. what are the possible energies of photons emitted?Indicate the corresponding transitions on the diagram. -1 eV___ -5 eV ___ -8 eV ____ -10 eV ____ -20 eV ____
The possible energies of photons emitted would be 2 eV, 3 eV, 5 eV, 10 eV, 12 eV, 15 eV, and 19 eV. The corresponding transitions on the diagram would be:
2 eV: State 3 to State 4
3 eV: State 2 to State 3
5 eV: State 2 to State 4
10 eV: State 4 to State 5
12 eV: State 3 to State 5
15 eV: State 2 to State 5
19 eV: State 1 to State 5
Transitions are words or phrases that connect different ideas within a piece of writing. They are used to help the reader move from one idea to another in a smooth and logical way. Transitions are an important part of writing because they help to create coherence and flow, making the text easier to read and understand.
Examples of transition words and phrases include "however," "moreover," "in addition," "on the other hand," "therefore," "consequently," "likewise," and "for instance." Using transitions in writing can improve the overall quality of the text by making it more organized, clear, and easy to follow. Transitions can be used in any type of writing, from academic essays to business reports to creative writing.
To learn more about Transitions visit here:
brainly.com/question/18089035
#SPJ4
Consider a generator that rotates its 200 turn, 019 m diameter coil at 3200 rpm in a 0.75 T field Randomized Variables d-0.19 m f 3200 rpm B 0.75 T
The induced EMF in the coil will vary sinusoidally between 0 and 0 volts, with a frequency of 3200/60 = 53.3 Hz.
Using the given information, we can calculate the EMF induced in the coil using the equation: EMF = NABωsinθ
where N is the number of turns in the coil, A is the area of the coil, B is the magnetic field strength, ω is the angular velocity of the coil, and θ is the angle between the magnetic field lines and the normal to the coil.
First, we need to find the area of the coil:
A = πr^2
A = π(0.19/2)^2
A = 0.028 m^2
Next, we can calculate the angular velocity:
ω = 2πf
ω = 2π(3200/60) (converting from rpm to Hz)
ω = 335.1 rad/s
Now we can calculate the EMF induced in the coil for a random value of θ: EMF = NABωsinθ
EMF = (200)(0.028)(0.75)(335.1)sinθ
EMF = 1418.8sinθ volts
The value of θ will vary randomly between 0 and 2π, so the maximum and minimum values of the induced EMF can be found by substituting these values into the equation above:
EMFmax = 1418.8sin(2π) = 0 volts
EMFmin = 1418.8sin(0) = 0 volts
Therefore, the induced EMF in the coil will vary sinusoidally between 0 and 0 volts, with a frequency of 3200/60 = 53.3 Hz.
To learn more about EMF here:
https://brainly.com/question/15121836
#SPJ11
3. an ac circuit is powering an electric heater (i.e., pure resistance, pf = 1.0). assume the voltage is 120 v and the current draw is 10 a. compute the apparent power and real power
The apparent power (S) is the total power in an AC circuit is 1200 VA, while the real power (P) is the power that is actually used to perform useful work, such as generating heat in the case of an electric heater is 1200 W.
In an AC circuit powering an electric heater, the apparent power (S) and real power (P) can be calculated using the formulas:
Apparent power (S) = Voltage (V) × Current (I)
Real power (P) = Apparent power (S) × Power factor (PF)
Given that the voltage (V) is 120 V and the current draw (I) is 10 A, we can substitute these values into the formulas to compute the apparent power and real power.
Apparent power (S) = 120 V × 10 A = 1200 VA (volt-amperes)
The apparent power (S) represents the total power in the circuit, which includes both the real power (P) and the reactive power (Q) due to the inductance or capacitance in the circuit.
The power factor (PF) is given as 1.0, which indicates that the circuit has a purely resistive load (the electric heater), and there is no reactive power component. Therefore, the real power (P) is equal to the apparent power (S).
Real power (P) = Apparent power (S) × Power factor (PF) = 1200 VA × 1.0 = 1200 W (watts)
The real power (P) represents the actual power consumed by the electric heater and is the power that is used to generate heat. It is the power that is useful and converted into the desired output (heat) in this case.
In summary, the power factor (PF) indicates the efficiency of power utilization in the circuit, with a higher power factor indicating a more efficient utilization of power.
You can learn more about apparent power at: brainly.com/question/31116183
#SPJ11
what is the linear speed of an outer horse on the carousel, which is 2.55 m from the axis of rotation]
The linear speed of an outer horse on the carousel can be calculated using the formula v = rω, where v is the linear speed, r is the distance from the axis of rotation, and ω is the angular velocity. Assuming that the carousel is rotating at a constant speed, we can use the formula v = rω to find the linear speed of the outer horse.
Given that the distance from the axis of rotation to the outer horse is 2.55 m, we can plug this value into the formula to get:
v = rω
v = (2.55 m)(ω)
However, we still need to find the value of ω. To do this, we need to know the period of rotation, which is the time it takes for the carousel to complete one full rotation. Let's assume that the period is 10 seconds.
The formula for angular velocity is ω = 2π/T, where T is the period of rotation. Plugging in the values we know, we get:
ω = 2π/T
ω = 2π/10 s
ω = 0.628 rad/s
Now we can use the formula v = rω to find the linear linear
v = (2.55 m)(0.628 rad/s)
v = 1.6 m/s
Therefore, the linear speed of the outer horse on the carousel is 1.6 m/s.
Learn more about linear here:
https://brainly.com/question/15830007
#SPJ11
what is the resistance of a 20.4 −m-long piece of 12-gauge copper wire having a 2.047 −mm diameter? the resistivity of copper is 1.61 ×10−8ωm.
Answer: 3.24 * 10^-4 ohms
Explanation:
For this question, we will use the equation R = p L/A. R represents resisatnce, p is resistivity, L is length, and A is area.
p = 1.61 * 10^-8 ohm-meters
L = 20.4 m
A = (area of a circle)
- Convert diameter into radius (and the correct units): 2.047/2 * 10 ^-3.
Now plug them into the equation.
At a distance of 8 km from a radio transmitter the amplitude of electric field strength is measured to be 0.35 V/m. Assuming the transmitter radiates isotropically (a word we covered in class), what is the total power emitted by the transmitter, in Watts? (The area of a sphere is 4phir^2.)
The total power emitted by the transmitter, in Watts, is approximately 867,167 W. To find the total power emitted by the transmitter, we need to use the given information: distance from the transmitter (8 km), electric field strength (0.35 V/m), and the assumption that the transmitter radiates isotropically.
We also need the formula for the area of a sphere (4πr²).
Step 1: Convert the distance from kilometers to meters:
8 km = 8,000 meters
Step 2: Calculate the surface area of the sphere:
Area = 4πr² = 4π(8,000 m)² ≈ 804,247,719 m²
Step 3: Calculate the power density at the given distance (Power density = E²/120π):
Power density = (0.35 V/m)² / (120π) ≈ 1.08 × 10⁻³ W/m²
Step 4: Calculate the total power emitted by the transmitter (Power = Power density × Area):
Total power = 1.08 × 10⁻³ W/m² × 804,247,719 m² ≈ 867,167 W.
To know more about transmitter refer here:
https://brainly.com/question/2084370#
#SPJ11
The scientist first credited for discovering the concept of inertia was Select one: a. Newton. b. Aristotle. c. Galileo. d. Copernicus
The scientist first credited for discovering the concept of inertia was Galileo. Option c is correct.
Galileo was an Italian physicist, mathematician, and astronomer who lived in the late 16th and early 17th century. He was one of the first scientists to study motion and is credited with discovering the concept of inertia, which is the tendency of a body at rest to remain at rest or a body in motion to remain in motion in a straight line at a constant velocity unless acted upon by a force.
Galileo discovered this concept through his experiments with moving objects, including rolling balls and falling objects, and his observations of the movements of the planets. His work laid the foundation for Isaac Newton's laws of motion, which are still used today to describe the behavior of objects in motion. Hence Option c is correct.
To learn more about concept of inertia, here
https://brainly.com/question/31322892
#SPJ4
Two 3.7-uF capacitors, two 2.0kohm resistors, and a 16.0-V source are connected in series.Starting from the uncharged state, how long does it take for the current to drop from its initial value to 1.30mA ?
It takes 4.7ms for the current to drop from its initial value to 1.30mA.
We can solve for the time t when the current drops to 1.30mA by setting I(t) equal to 1.30mA and solving for t:
[tex]1.30mA = I0e^(-t/\tau)[/tex]
ln(1.30mA/I0) = -t/τ
Solving for t, we get:
t = -ln(1.30mA/I0) * τ
I0 = V/R = 16.0V / 4.0kohm = 4.0mA
Substituting into the equation for t, we get:
t = -ln(1.30mA/4.0mA) * 7.4ms = 4.7ms
Current refers to the flow of electric charge in a circuit or medium. It is measured in amperes (A) and is denoted by the symbol "I." The flow of current can be either direct or alternating. Direct current (DC) flows continuously in one direction, while alternating current (AC) changes direction periodically.
The flow of current is facilitated by the presence of a voltage difference or potential difference between two points in a circuit or medium. This voltage difference causes electrons to flow from a higher potential to a lower potential, thereby creating a flow of current. The rate of flow of current is dependent on the resistance of the medium through which it flows.
To learn more about Current visit here:
brainly.com/question/12618565
#SPJ4
A lens is made of glass having an index of refraction of 1.5. One side of the lens is flat, and the other is convex with a radius of curvature of 20cm. (a) Find the focal length of the lens. (b) If and object is placed 40 cm in front of the lens, where is the image?
The focal length of the lens is 40 cm, and the image is located at infinity.
The focal length of a lens can be determined using the lensmaker's equation;
1/f=(n - 1) × (1/R₁ - 1/R₂)
where f is the focal length of the lens, n is the refractive index of the lens material (in this case, n = 1.5), R₁ is the radius of curvature of one side of the lens (in this case, R₁ = infinity for the flat side), and R₂ is the radius of curvature of the other side of the lens (in this case, R₂ = 20 cm for the convex side).
Plugging in the values, we get;
1/f = (1.5 - 1) × (1/infinity - 1/20)
1/f = 0.5 × (-1/20)
1/f = -0.025
f = -40 cm
Note that the negative sign indicates that the lens is a converging lens (i.e., it brings parallel light rays to a focus).
Therefore, the focal length of the lens will be 40 cm.
To find the location of the image formed by the lens, we can use the thin lens equation;
1/o + 1/i = 1/f
where o is the object distance (the distance of the object from the lens), i is the image distance (the distance of the image from the lens), and f is the focal length of the lens.
Plugging in the values, we get;
1/40 + 1/i = 1/40
1/i = 0
This indicates that the image is formed at infinity (i.e., the light rays are parallel after passing through the lens).
Therefore, the image is located at infinity.
To know more about focal length here
https://brainly.com/question/16188698
#SPJ4
An electric motor on a full electric vehicle operates on a 350 V battery pack and has 60kWh energy. The vehicle consumes 200Wh/km.
A) how many kilometers can the car drive on a fully charged battery?
B) If the battery current drain during driving is at 100 A, find how many hours in the car and drive at this discharge current. assume the voltage of the battery during driving remains at 350 V.
C) how much does it cost to charge the battery pack if electricity cost is 0.15 cents per kWh
A) To calculate the number of kilometers the car can drive on a fully charged battery, we need to divide the total energy of the battery (60 kWh) by the energy consumed per kilometer (200 Wh/km).
60,000 Wh / 200 Wh/km = 300 km
Therefore, the car can drive 300 kilometers on a fully charged battery.
B) If the battery current drain during driving is at 100 A, we can calculate the number of hours the car can drive at this discharge current by dividing the total energy of the battery (60 kWh) by the power consumed (voltage x current).
P = V x I
P = 350 V x 100 A = 35,000 W
60,000 Wh / 35,000 W = 1.7 hours
Therefore, the car can drive for 1.7 hours at a discharge current of 100 A.
C) If the electricity cost is 0.15 cents per kWh, we can calculate the cost to charge the battery pack by multiplying the energy of the battery (60 kWh) by the electricity cost (0.15 cents/kWh) and converting it to dollars.
60 kWh x 0.15 cents/kWh = 9 dollars
Therefore, it costs 9 dollars to charge the battery pack at an electricity cost of 0.15 cents per kWh.
Hi there! I'd be happy to help you with your electric vehicle question.
A) To determine how many kilometers the car can drive on a fully charged battery, divide the battery energy by the vehicle's energy consumption:
60 kWh / (200 Wh/km) = (60,000 Wh) / (200 Wh/km) = 300 km
The car can drive 300 kilometers on a fully charged battery.
B) To find how many hours the car can drive at a discharge current of 100 A, first calculate the power being used:
Power = Voltage x Current = 350 V x 100 A = 35,000 W (or 35 kW)
Next, divide the battery energy by the power being used:
60 kWh / 35 kW = 1.714 hours
The car can drive for 1.714 hours at this discharge current.
C) To calculate the cost to charge the battery pack, multiply the battery energy by the electricity cost:
60 kWh x $0.15/kWh = $9
It costs $9 to charge the battery pack.
I hope this helps! If you have any further questions, feel free to ask.
Learn more about battery energy by the electricity here;
https://brainly.com/question/31238327
#SPJ11
50 ml of water at 80°c is added to 50 ml of water at 20°c. what would be the final temperature?
The final temperature of the mixture would be 50°C when 50 ml of water at 80°C is added to 50 ml of water at 20°C.
To determine the final temperature, we need to use the principle of conservation of energy, which states that the total energy in a closed system remains constant. In this case, we can assume that the two samples of water together form a closed system.
First, we need to calculate the amount of energy in each sample of water using the specific heat capacity formula:
q = m x c x ΔT
where q is the energy in Joules, m is the mass in grams, c is the specific heat capacity in J/g°C, and ΔT is the change in temperature in °C.
For the first sample of water at 80°C:
[tex]q_1 = 50 * 4.18 *(80 - T_1)[/tex]
where T1 is the final temperature we are trying to find.
For the second sample of water at 20°C:
[tex]q_2 = 50 *4.18 * (T_1 - 20)[/tex]
Now, since the total energy in the closed system remains constant, we can set q1 equal to [tex]q_2[/tex] and solve for [tex]T_1[/tex]:
[tex]50 * 4.18 * (80 - T_1) = 50 * 4.18 * (T_1 - 20)[/tex]
Simplifying the equation, we get:
[tex](80 - T_1) = (T_1 - 20)[/tex]
[tex]100 = 2T_1[/tex]
[tex]T_1[/tex] = 50°C
Therefore, the final temperature of the mixture would be 50°C.
Learn more about energy :
https://brainly.com/question/1371184
#SPJ11
The meterstick is supported so that it remains horizontal, and then it is released from rest. One second after it is released, what is the change in the angular momentum of the meterstick? A. 0 B. 500 kg.m/s C. 1000 kg.mºs D. The change in angular momentum of the meterstick cannot be determined from this information.
The change in the angular momentum of the meterstick cannot be determined from this information.
An object's angular momentum is comparable to its linear momentum, which is defined as the mass in motion, except that the item is rotating as opposed to traveling in a straight line. We can think of angular momentum as the mass in rotation.
Change in angular momentum
ΔL = L(final) - L(initial)
ΔL = Iω,
where I = moment of inertia and
ω = angular velocity.
No information can be obtained from the question about angular velocity, hence we can't calculate the change in angular momentum.
Therefore, the change in the angular momentum of the meterstick cannot be determined from this information.
To know more about angular momentum, click here :
https://brainly.com/question/29563080
#SPJ12
A wheel rotates at a constant rate of 2.0 × 10^3 rev/min . (a) What is its angular velocity in radians per second? (b) Through what angle does it turn in 10 s? Express the solution in radians and degrees.
In 10 seconds, the wheel turns through an angle of approximately 2094.4 radians or 120000 degrees.
(a) To find the angular velocity in radians per second, first convert the given rate from revolutions per minute to radians per second. Recall that there are 2π radians in one revolution and 60 seconds in one minute.
Angular velocity (ω) = (2.0 × 10^3 rev/min) × (2π radians/rev) × (1 min/60 s)
Now, perform the calculations:
ω = (2.0 × 10^3) × (2π) × (1/60)
ω ≈ 209.44 radians/s
So, the angular velocity of the wheel is approximately 209.44 radians per second.
(b) To find the angle through which the wheel turns in 10 seconds, multiply the angular velocity by the time interval:
Angle (θ) = Angular velocity (ω) × Time (t)
θ = 209.44 radians/s × 10 s
θ ≈ 2094.4 radians
Now, to express this angle in degrees, recall that there are 180 degrees in π radians:
θ (degrees) = 2094.4 radians × (180°/π)
θ (degrees) ≈ 120000°
Therefore, the wheel rotates across an angle of around 2094.4 radians, or 120000 degrees, in 10 seconds.
Learn more about "angular velocity": https://brainly.com/question/20432894
#SPJ11
Initially, a single capacitance C1 is wired to a battery. Then capacitance C2 is added in parallel. Are (a) the potential difference across C1 and (b) the charge q1 on C1 now more than, less than, or the same as previously? (c) Is the equivalent capacitance C12 of C1 and C2 more than, less than, or equal to C1? (d) Is the charge stored on C1 and C2 together more than, less than, or equal to the charge stored previously on C1? (e)Repeat Question 5 for C2 added in series rather than in parallel. i only care for e part and please with the full answer so i can understand why
Initially, a single capacitance C1 is wired to a battery. Then capacitance C2 is added in series.
(e) When capacitance C2 is added in series to capacitance C1:the equivalent capacitance C12 of C1 and C2 is less than C1, and the equivalent capacitance C12 = (C1C2)/(C1 + C2)
As, the capacitances are in series, and the total potential difference V across them would be equal to the sum of the potential differences across them.
So, the potential difference across C1 will be less than the previous potential difference across C1 when only capacitance C1 was connected to the battery.
The formula for potential difference across capacitance C1 would be: V = Q1/C1, where Q1 is the charge stored in capacitance C1.
As the potential difference V decreases and C1 remains the same, the charge Q1 on C1 would also decrease. Thus, (i) the potential difference across C1 and (ii) the charge q1 on C1 is now less than previously.
Know more about capacitance:
https://brainly.com/question/31871398
#SPJ12
what is the wavelength of light in nm falling on double slits separated by 2.15 µm if the third-order maximum is at an angle of 61.0°? 627 correct: your answer is correct. nm
The correct answer is the wavelength of light falling on the double slits is approximately 1160 nm.
To find the wavelength of light in nm, we can use the formula for double-slit interference:
d * sin(θ) = m * λ
where:
- d is the distance between the slits (2.15 µm or 2.15 * 10^(-6) m)
- θ is the angle of the maximum (61.0°)
- m is the order of the maximum (3 for third-order)
- λ is the wavelength of light
Rearranging the formula to find λ:
λ = (d * sin(θ)) / m
Converting the angle to radians:
θ = 61.0° * (π / 180) ≈ 1.064 radians
Now, plug in the values:
λ = (2.15 * 10^(-6) m * sin(1.064)) / 3
Calculating the wavelength:
λ ≈ 1.16 * 10^(-6) m
Converting the wavelength to nm:
λ ≈ 1160 nm
To know more about wavelength here
https://brainly.com/question/31143857
#SPJ11
The substitution of machinery that has sensing and control devices for human labour is best described by the term: Select one:
a. computer-integrated manufacturing
b. loss of jobs
c. flexible manufacturing system
d. automation
e. computer-aided manufacturing
The substitution of machinery that has sensing and control devices for human labor is best described by the term: d. automation
The best term to describe the substitution of machinery that has sensing and control devices for human labor is "automation". Automation involves the use of machinery with advanced control devices and sensors to perform tasks that were previously done by humans. This can lead to increased efficiency and productivity, but can also result in the loss of jobs for human workers. Automation can be used to replace physical labor, reduce workloads, minimize mistakes, and increase efficiency. Automation can also be used to increase safety by having machines perform tasks that are too dangerous for humans, such as handling hazardous materials.
To learn more about automation click here https://brainly.com/question/28222698
#SPJ11
9. Block A is pulled at a constant velocity up an incline as shown. Toward which point will the force of
friction be directed?
C.
d.
t
1 TL.
C.
The block would try to push down due to it's weight.
if a = 12i - 16j and b = -24i ; 10j, what is the direction of the vector c = 2a - b?
The direction of the vector c = 48i - 42j is approximately -41.19 degrees. Since the angle is negative, it means the vector c is in the fourth quadrant.
To find the direction of the vector c = 2a - b, we first need to calculate the components of the new vector c.
1. Multiply vector a by 2:
2a = 2(12i - 16j) = 24i - 32j
2. Subtract vector b from the result of step 1:
c = 2a - b = (24i - 32j) - (-24i + 10j) = 24i - 32j + 24i - 10j
3. Combine like terms:
c = 48i - 42j
Now that we have the components of vector c, we can find its direction. The direction of a vector can be calculated using the tangent inverse function (arctan):
θ = arctan(opposite/adjacent) = arctan(c_j/c_i) = arctan((-42)/48)
Use a calculator to find the arctan value:
θ ≈ -41.19 degrees
To learn more about vector click here https://brainly.com/question/29740341
#SPJ11
Conservation of Momentum states Select one: o When an object decreases in momentum, then some other object in the same system will increase in momentum. o is not observed in the universe to be violated given that all objects can be observed. O is none of these because Momentum is never conserved. O That the total momentum of an isolated system remains constant. O is like the principal for Conservation of Energy.
Conservation of Momentum states d. That the total momentum of an isolated system remains constant
This means that in a closed system where no external forces are acting, the total momentum of the system will remain constant. This principle is similar to the principle of conservation of energy, where the total energy of a closed system remains constant. Momentum is a property of moving objects and is calculated by multiplying the mass of an object by its velocity.
If an object in a system loses momentum, another object in the same system must gain an equal amount of momentum to maintain the total momentum of the system. This principle is observed in all systems, from subatomic particles to celestial bodies. Understanding the conservation of momentum is essential in fields such as physics and engineering, as it can help predict the behavior of systems and the outcomes of collisions or other interactions between objects. Conservation of Momentum states d. that the total momentum of an isolated system remains constant.
Learn more about momentum at:
https://brainly.com/question/31336310
#SPJ11
a discus thrower accelerates a discus from rest to a speed of 25.9 m/s by whirling it through 1.30 rev. assume the discus moves on the arc of a circle 1.04 m in radius.(a) Calculate the final angular speed of the discus._______ rad/s(b) Determine the magnitude of the angular acceleration of the discus, assuming it to be constant._______ rad/s2
The final angular speed of the discus is 113.8 rad/s, and the magnitude of the angular acceleration of the discus is 347.6 rad/s².
To find the final angular speed of the discus, we can use the equation:
ω² = ω0² + 2αθ
where ω will be the final angular speed, ω0 will be the initial angular speed (which is zero), α will be the angular acceleration, and θ is the angle through which the discus is whirled.
We know that θ = 1.30 rev, which is equivalent to 2π(1.30) = 8.168 radians, and the radius of the circle on which the discus moves is 1.04 m. Therefore, the distance traveled by the discus is;
s = rθ = (1.04 m)(8.168 rad) = 8.502 m
We also know that the final speed of the discus is 25.9 m/s, so we can find the time it takes to reach this speed;
v = at
25.9 m/s = a t
t = 25.9/a
where a is the linear acceleration of the discus.
Since the distance traveled by the discus is equal to the circumference of the circle on which it moves, we can find the time it takes to travel this distance;
t = s/v = 8.502 m / 25.9 m/s = 0.328 s
Therefore, we have;
t = 25.9/a
0.328 s = 25.9/a
a = 79.02 m/s²
Now we can use the equation above to find ω;
ω² = 2αθ
ω² = 2(79.02 m/s²)(8.168 rad)
ω² = 12945.76
ω = 113.8 rad/s
Therefore, the final angular speed of the discus will be 113.8 rad/s.
To find the angular acceleration of the discus, we can use the equation;
α = (ω - ω0) / t
where ω will be the final angular speed, ω0 will be the initial angular speed (which is zero), and t is the time it takes for the discus to reach this speed.
We already know that ω = 113.8 rad/s and that t = 0.328 s, so we have;
α = (113.8 rad/s - 0 rad/s) / 0.328 s
α = 347.6 rad/s²
Therefore, the magnitude of the angular acceleration of the discus is 347.6 rad/s².
To know more about angular speed here
https://brainly.com/question/14663644
#SPJ4
at 11 °c, the kinetic energy per molecule in a room is kave.
At 11 °C, the kinetic energy per molecule in a room is kave = 6.21 x 10^-21 J.
Why the kinetic energy is per molecule in a gas?The kinetic energy per molecule in a gas is given by the formula:
KE = (3/2) kT
where KE is the kinetic energy per molecule, k is the Boltzmann constant (1.38 x 10^-23 J/K), and T is the temperature in Kelvin.
To convert a temperature from Celsius to Kelvin, we need to add 273.15 to the Celsius temperature.
So if the temperature is 11 °C, then the temperature in Kelvin is:
T = 11 °C + 273.15 = 284.15 K
Substituting this value into the formula for kinetic energy per molecule, we get:
KE = (3/2) kT = (3/2) (1.38 x 10^-23 J/K) (284.15 K)
KE = 6.21 x 10^-21 J
Therefore, at 11 °C, the kinetic energy per molecule in a room is kave = 6.21 x 10^-21 J.
Learn more about kinetic energy
brainly.com/question/26472013
#SPJ11