A force of 120 N is applied to the front of a sledge at an angle of 28.00 above the horizontal so as to pull the sledge a distance of 165 meters. How much work was done by the applied force?

Answer:

The force of friction opposes the motion of an object, causing moving objects to lose energy and slow down.

Explanation:

Answer:

n = 4 x 10¹⁸ photons

Explanation:

First, we will calculate the energy of one photon in the radiation:

[tex]E = \frac{hc}{\lambda}\\\\[/tex]

where,

E = Energy of one photon = ?

h = Plank's Constant = 6.625 x 10⁻³⁴ J.s

c = speed of light = 3 x 10⁸ m/s

λ = wavelength of radiation = 567 nm = 5.67 x 10⁻⁷ m

Therefore,

[tex]E = \frac{(6.625\ x\ 10^{-34}\ J.s)(3\ x\ 10^8\ m/s)}{5.67\ x\ 10^{-7}\ m}[/tex]

E = 3.505 x 10⁻¹⁹ J

Now, the number of photons to make up the total energy can be calculated as follows:

[tex]Total\ Energy = nE\\1.4\ J = n(3.505\ x\ 10^{-19}\ J)\\n = \frac{1.4\ J}{3.505\ x\ 10^{-19}\ J}\\[/tex]

n = 4 x 10¹⁸ photons

Answer:

the final speed of the smaller car is 5.624 m/s

Explanation:

Given;

mass of the small car, m₁ = 200 kg

initial velocity of the small car, u₁ = 3 m/s

mass of the larger car, m₂ = 392 kg

initial velocity of the larger car, u₂ = 6 m/s

final velocity of the larger car, v₂ = 1.6 m/s

let the direction of the larger car be positive

let the direction of the smaller car be negative

Apply the principle of conservation of linear momentum to determine the final speed of the smaller car.

m₁u₁ + m₂u₂ = m₁v₁  +  m₂v₂

200(-3)  +  392(6)  = 200v₁   +  392 x 1.6

-600 + 2352  = 200v₁    +  627.2

1752   =  200v₁     +   627.2

1752  -  627.2     =  200v₁

1124.8  = 200v₁

v₁  =  1124.8/200

v₁ = 5.624 m/s

Therefore, the final speed of the smaller car is 5.624 m/s

Answer:

2.334‬ kV

Explanation:

Since the electric field strength Ecosθ = -ΔV/Δx = -(V₂ - V₁)/(x₂ - x₁)

where V₁ = potential at x₁ = 966 V, x₁ = 4.59 m, V₂ = potential at x₂ = unknown, x₂ = 1.61 m and θ = angle between E and the x - axis.

Given that E = + 449 N/C and since it is directed parallel to the positive x - axis, θ = 0°

So,

Ecosθ = -ΔV/Δx

Ecos0° = -ΔV/Δx

E = -ΔV/Δx

E = -(V₂ - V₁)/(x₂ - x₁)

making V₂ subject of the formula, we have

-E(x₂ - x₁) = V₂ - V₁

-E(x₂ - x₁) + V₁ = V₂

V₂ = V₁ - E(x₂ - x₁)

Substituting the values of the variables into the equation, we have

V₂ = V₁ - E(x₂ - x₁)

V₂ = 966 V - 449 N/C(1.61 m - 4.59 m)

V₂ = 966 V - 449 N/C(-2.98 m)

V₂ = 966 V + 1,338.02‬ Nm/C

V₂ = 966 V + 1,338.02‬ V

V₂ = ‭2,334.02‬ V

V₂ ≅ ‭2,334‬ V

V₂ = ‭2.334‬ kV

Answer:

Explanation:

Laminar Flow is a very important topic discussed in physics in the subject of fluid dynamics. Basically, it explains how fluid particles behave at lower velocities. In such cases and when the viscosity of the fluid is low, the fluid particles flow smoothly in perfectly perpendicular layers that do not collide or cross each other. Unlike turbulent flow, which is the opposite. An example of Laminar flow can be seen when you open up a water hose with little pressure, the water simply flows out of the hose and looks very clear and smooth.

Explanation:

full moon

Answer: 420 km

Explanation:

120 per hour, 3.5 hours

120 x 3.5 = 420

Explanation:

light waves because the categorised under mechanical waves

Answer:

5 m/s

Explanation:

Mass of the boy + scooter system =  35 kg

Kinetic Energy =  437.6 J

437.6 = [tex]\frac{1}{2} 35 {v}^2[/tex]

25.0057143 = [tex]v^{2}[/tex]

v = 5 m/s

Answer:

Scenario 1 will cause the sound of the drumstick hitting the metal bar to reach your ears in the least amount of time.

Explanation:

The sound wave will travel faster in the metal bar than through the air because the speed of sound waves in solids is faster than it is in gases.

Answer:

Scenario 1 will cause the sound of the drumstick hitting the metal bar to reach your ears in the least amount of time.

Explanation:

ifunny is dankreloaded

Answer:

1.5 m/s

Explanation:

The dart moves when it leaves the spring gun with a velocity of 22.4 m/s.

Potential energy is defined as the stored energy that depends on the relative position of different parts of a system such as springs have more potential energy when it will be compressed or stretched.

For velocity calculation of the dart when it leaves the spring gun, using the formula for potential energy stored in a spring:

[tex]PE = (1/2)kx^2[/tex]

where,

k is the spring constant

x is the compression of the spring.

Since the spring is compressed by 5 cm, the potential energy stored in it is:

[tex]PE = (1/2)(250 N/m)(0.05 m)^2[/tex]

PE = 6.25 J

The potential energy stored in the spring will be transferred to the dart when it is released which can be calculated from the velocity of the dart using the equation of conservation of energy:

[tex]PE = (1/2)mv^2[/tex]

where,

m is the mass of the dart

v is its velocity.

Solving for v:

v = sqrt(2PE/m)

=> sqrt(2(6.25 J)/(0.025 kg))

=> 22.4 m/s.

Thus, the dart moves when it leaves the spring gun with a velocity of 22.4 m/s.

Learn more about Velocity, here:

brainly.com/question/25287332

#SPJ2

Answer:

They store floodwater

Explanation:

Answer:

apply more energy to the object with more mass

Explanation:

Answer:

1.12

Explanation:

Acellus

Answer: +1.12

Explanation:

This answer works for Acellus! :)

Answer:

[tex]force = mass \times acceleration \\ 100 = m \times 5 \\ m = \frac{100}{5} \\ m = 20 \: kg[/tex]

Answer:

An object is in notion if its position change with time.

Answer:

Current = 0.063 Amperes

Explanation:

Let the three resistors be R1, R2, and R3 respectively.

Given the following data;

R1 = 25.0Ω,

R2 = 30.0Ω

R3 = 40.0Ω

Voltage = 6 Volts

First of all, we would determine the equivalent or total resistance;

Total resistance (in series) = R1 + R2 + R3

Total resistance = 25.0Ω + 30.0Ω + 40.0Ω

Total resistance = 95 Ω

Next, we find the current flowing through the circuit;

Voltage = current * resistance

Substituting into the formula, we have;

6 = current * 95

Current = 6/95

Current = 0.063 Amperes

Answer:

Explanation:

The answer is A. First of all, due to the First Law of Thermodynamics, energy cannot be created or destroyed, it only changes form. That being said, it is impossible for the PE and the KE to both increase or decrease at the same time. The second one starts decreasing, the other starts increasing at the exact same rate. PE exists or is at its highest when an object has the potential to fall to a point lower than it is, and it is at this point where Kinetic energy is the lowest. If this block is kicked UP a ramp, which is odd but there you have it, the potential energy increases as it gets higher off the ground. Because of gravity, and assuming that once the block is kicked, the foot that kicked it is no longer important to it (meaning it's not being pushed up, it's just kicked once and that's it) and it will slow down very quickly. KE exists where there is a great amount of velocity.

The answer is A.

Answer:

answer=1.97×10^8

Explanation:

will u mark me brainliest?

Green light (520 nm) enters glass with n = 1.52, the wavelength of light that enters the glass is 520 nm.

To find the wavelength of light that enters the glass, we can use Snell's Law, which relates the angles and indices of refraction for light passing through a boundary between two mediums:

n₁ × sin(θ₁) = n₂ × sin(θ₂)

In this scenario, we can assume that the angle of incidence is zero degrees (the light is entering the glass perpendicular to the surface). Therefore, sin(θ₁) becomes sin(0) which is 0.

Using Snell's Law, we have:

n₁ × sin(θ₁) = n₂ × sin(θ₂)

1 × 0 = 1.52 × sin(θ₂)

The wavelength of light that enters the glass remains the same as the initial wavelength in air, which is 520 nm (nanometers).

Thus, the wavelength of light that enters the glass is 520 nm.

For more details regarding wavelength, visit:

https://brainly.com/question/31143857

#SPJ5

Answer:Electrical conduction is the transfer of electrically charged particles through a medium, such as electricity traveling through the power lines in your house. Sound conduction (or acoustic conduction) is the transfer of sound waves through a medium, such as vibrations from loud music passing through a wall.

Explanation: Trust

Answer:

50 newtons of kenetic energy?? im guessing ngl

Explanation:

Answer:

extensions.

Explanation:

Hope this helps

Answer:

extensions i think because sound waves travel through the air and to our ears so its extended  

Explanation:

Answer:

A

Explanation:

Explanation:

The force on the passenger will be F = ma

Here, m does not change, but a is the variable.

If the cars slows down very fast, the acceleration will be higher, and thus the force will be higher.

If the acceleration is lower, the force will be lower as well, which would be the most desirable scenario for the passenger.

Answer:

Ok, first is important that you understand how the heat radiation works.

All the objects that have some heat energy in them, radiate some of that energy in the form of electromagnetic waves.

Particularly, the Sun radiates a lot of energy (at the point that if you step under the sunlight, you can feel on your skin the heat that comes from the sun, this is due to radiation).

Now, suppose that you have a thin coat of water over you, then the material that gets impacted by that radiation will be the water and not you, and then the energy is dissipated (some of the energy goes to your body and some go to the air)

This is one way in which spraying water over themselves helps the elephants to keep them cool.

Another way in which heat can be transferred is by conduction.

When you have a hot object and a cool object, and you put them together (so the objects touch each other), the heat will flow from the hotter object to the cooler object until both objects have the same temperature.

Then if the elephant body temperature is larger than the temperature of the water that the elephant sprays over his body, when the water touches the body some of the heat in the elephant body will be transferred to the coat of water, and in this way, the temperature of the elephant's body decreases.

These are the two ways we wanted to find.

Answer:

b and d :)

Explanation:

Answer:

A, B, And C,

Explanation:

The law of conservation of energy is a physical law that states energy cannot be created or destroyed but may be changed from one form to another. Another way of stating this law of chemistry is to say the total energy of an isolated system remains constant or is conserved within a given frame of reference.

Answer:

B.) a wheel and axle and a lever

Explanation:

P.S - The exact question is -

Given - A wheelbarrow can be used to help lift a load, such as a pile of dirt, and then push the load across a distance. A man pushes a wheelbarrow.

To find - Which simple machines make up a wheelbarrow?

A.) a pulley and an inclined plane

B.) a wheel and axle and a lever

C.) a pulley and a wheel and axle

D.) a lever and a wedge

Proof -

The correct option is - B.) a wheel and axle and a lever

Wheelbarrows are used to carry more goods from place to place by using minimal force as compared when goods are carried by hand.

With this machine, During hauling people can save time.

Answer:

B.) a wheel and axle and a lever

Explanation:

Answer:

F = 4117.64

Explanation:

First, we will calculate the acceleration of the hand, by using the third equation of motion:

[tex]2as = v_f^2 - v_i^2\\[/tex]

where,

a = acceleration = ?

s = distance covered = compression = 8.5 cm = 0.085 m

vf = final speed = 0 m/s

vi = iniial speed = 10 m/s

Therefore,

[tex]2a(0.085\ m) = (0\ m/s)^2-(10\ m/s)^2\\a = - 588.23\ m/s^2[/tex]

negative sign hows deceleration.

Now, we will calculate the force exerted by the hand:

[tex]F = ma = (7\ kg)(588.23\ m/s^2)\\[/tex]

F = 4117.64 N