A force of 100N acts on a body of mass 20kg. The force accelerates the body from rest until it attains a velocity of 20ms-1 . Through what distance the force acts?​

The pressure increase in the fluid in the syringe when a nurse applies a force of 27 N to the syringe's circular piston with a radius of 1.2 cm is approximately 71618.037 Pascal (Pa).

We have to find the pressure increase in the fluid in a syringe when a nurse applies a force of 27 N to the syringe's circular piston with a radius of 1.2 cm.

First, calculate the area of the circular piston using the formula A = πr², where A is the area and r is the radius.

In this case, r = 1.2 cm.

A = π(1.2 cm)²
A ≈ 3.77 cm²

Now, use the formula P = F/A, where P is the pressure increase, F is the applied force, and A is the piston area.

In this case, F = 27 N and A ≈ 3.77 cm².

Note that we need to convert the area to m² before calculating the pressure.

A ≈ 3.77 cm² * (1 m² / 10000 cm²) ≈ 0.000377 m²

Plug in the values and calculate the pressure increase:

P = 27 N / 0.000377 m² ≈ 71618.037 Pa

Learn more about pressure:

https://brainly.com/question/28012687

#SPJ11

The pressure increase in the fluid in the syringe when a nurse applies a force of 27 N to the syringe's circular piston with a radius of 1.2 cm is approximately 71618.037 Pascal (Pa).

We have to find the pressure increase in the fluid in a syringe when a nurse applies a force of 27 N to the syringe's circular piston with a radius of 1.2 cm.

First, calculate the area of the circular piston using the formula A = πr², where A is the area and r is the radius.

In this case, r = 1.2 cm.

A = π(1.2 cm)²
A ≈ 3.77 cm²

Now, use the formula P = F/A, where P is the pressure increase, F is the applied force, and A is the piston area.

In this case, F = 27 N and A ≈ 3.77 cm².

Note that we need to convert the area to m² before calculating the pressure.

A ≈ 3.77 cm² * (1 m² / 10000 cm²) ≈ 0.000377 m²

Plug in the values and calculate the pressure increase:

P = 27 N / 0.000377 m² ≈ 71618.037 Pa

Learn more about pressure:

https://brainly.com/question/28012687

#SPJ11

The speed of light in ice is 2.29 x 10^8m/s. The refractive index of ice is 1.31.

To find the index of refraction of ice, you can use:

            Index of refraction (n) = Speed of light in vacuum / Speed of light in the medium

The speed of light in a vacuum is approximately 3.00 x 10^8 m/s.

You've provided the speed of light in ice, which is 2.29 x 10^8 m/s.

Using these values, you can calculate the index of refraction of ice as follows:

            n = (3.00 x 10^8 m/s) / (2.29 x 10^8 m/s)

            n ≈ 1.31

The index of refraction of ice is approximately 1.31.

Learn more about refraction here:

https://brainly.com/question/27932095

#SPJ11

The speed of light in ice is 2.29 x 10^8m/s. The refractive index of ice is 1.31.

To find the index of refraction of ice, you can use:

            Index of refraction (n) = Speed of light in vacuum / Speed of light in the medium

The speed of light in a vacuum is approximately 3.00 x 10^8 m/s.

You've provided the speed of light in ice, which is 2.29 x 10^8 m/s.

Using these values, you can calculate the index of refraction of ice as follows:

            n = (3.00 x 10^8 m/s) / (2.29 x 10^8 m/s)

            n ≈ 1.31

The index of refraction of ice is approximately 1.31.

Learn more about refraction here:

https://brainly.com/question/27932095

#SPJ11

The index of refraction for this material is 3.

What is Refractions?

Refraction is the bending of light as it passes through a medium such as air, water, or glass. This bending occurs because light travels at different speeds in different media, and when it enters a new medium at an angle, the change in speed causes the light to change direction

The index of refraction (n) of a material is defined as the ratio of the speed of light in a vacuum (c) to the speed of light in the material (v):

n = c/v

If light travels one-third as fast in the material as it does in a vacuum, then the speed of light in the material (v) is:

v = (1/3)c

Substituting this into the equation for the index of refraction:

n = c/v = c/((1/3)c) = 3

Learn more about Refractions from the given link

https://brainly.com/question/1360744

#SPJ1

Question 1-9: Yes, it does seem to take more effort to move the cart when the force was inclined at an angle to the ramp's surface.

Question 1-10: if your choice in Prediction 1-1 was that it would take more effort to move the cart when the force was inclined at an angle, then yes, it was the best choice.

Explanation:

Question 1-9: Yes, it does seem to take more effort to move the cart when the force was inclined at an angle to the ramp's surface. This is because only the force component parallel to the displacement is included in the calculation of work.

The equation W = F × d × (cos A) supports this observation as a reasonable way to calculate the work. When the force is applied at an angle, the cosine of the angle is taken into account, which reduces the effective force used in the work calculation.

Question 1-10: Based on all of your observations in this investigation, if your choice in Prediction 1-1 was that it would take more effort to move the cart when the force was inclined at an angle, then yes, it was the best choice.

The observations support the fact that more physical work was done to move the cart over the same distance at the same slow constant speed when the force was applied at an angle to the ramp's surface.

To know more about force refer here:

https://brainly.com/question/13191643

#SPJ11

The equation that expresses the tangent of the angle to the first dark fringe (θdark) in terms of the width of the central maximum (D) and the distance from the slit to the screen (L) is tan θdark = tan((D/2) / L).

To express tan θdark in terms of D and L, we can use the formula for the angular width of the central maximum in a single-slit diffraction pattern:

θdark = (D/2) / L

where θdark is the angle to the first dark fringe from the central maximum, D is the width of the central maximum, and L is the distance from the slit to the screen. We want to express tan θdark in terms of D and L, so we can rewrite the formula as:

tan θdark = tan((D/2) / L)

This equation expresses the tangent of the angle to the first dark fringe (θdark) in terms of the width of the central maximum (D) and the distance from the slit to the screen (L).

Learn more about "slit": https://brainly.com/question/29451443

#SPJ11

5. The data collected will determine if the R=PL/A equation is supported or not.

6. The slope of the graph physically represents the resistivity of the wire.

7. The calculated value of resistivity will depend on the specific data collected and the wire being tested.

8. The uncertainty of the resistivity value can be estimated based on the uncertainty of the measurements taken and any assumptions made during the calculation process.

9. The value of resistivity should be reported with units and uncertainty.

10. The resistivity value can be compared to accepted values for different materials to determine the substance the wire is made of.

11. Resistance is the property of a specific wire, while resistivity is a property of a material. The wire with a larger diameter (0.1 mm) has a lower resistance than the wire with a smaller diameter (0.01 mm).

12. The current in the experiment should be kept relatively low to avoid heating the wire and changing its resistivity.

The experiment involves measuring the potential drop and distance along a wire to calculate resistance and plot it against length. The R=PL/A equation predicts that resistance is proportional to length and inversely proportional to cross-sectional area, so the plotted data should follow this relationship if the equation is supported.

The resistivity, denoted by p, is the coefficient of proportionality in the R=PL/A equation. Thus, the slope of the graph, which plots resistance against length, is equal to p/A, where A is the cross-sectional area of the wire. Therefore, the slope physically represents the resistivity of the wire.

The resistivity of a material is a constant that depends only on the material itself, but the calculated value will depend on the specific data collected and the wire being tested.

All measurements and calculations have some degree of uncertainty, which can propagate through to the final result. The uncertainty of the resistivity value can be estimated based on the uncertainty of the measurements taken, such as potential drop and wire diameter, and any assumptions made during the calculation process.

The value of resistivity should be reported with the appropriate units, such as ohm-meters, and the estimated uncertainty, such as +/- 0.1 ohm-meters.

Different materials have different resistivity values, so comparing the calculated resistivity value to accepted values for different materials can help determine the substance the wire is made of. The relative discrepancy between the calculated value and accepted value can also indicate the accuracy of the experiment.

Resistance is a property of a specific wire and depends on both the material and the geometry of the wire, while resistivity is a property of a material and does not depend on the geometry of the wire. Therefore, two wires made of the same material can have different resistances if they have different lengths or diameters. The wire with a larger diameter has a greater cross-sectional area, and thus a lower resistance, than the wire with a smaller diameter.

When a current flows through a wire, the wire heats up due to resistance. This can cause the resistivity of the wire to change, which can affect the accuracy of the experiment. Therefore, the current should be kept relatively low to avoid heating the wire and changing its resistivity.

To learn more about Resistance and resistivity, here

https://brainly.com/question/30799966

#SPJ4

The ranking of orbital speed is A < B < C. The object with medium mass (B) will have an intermediate orbital speed, while the object with the smallest mass (A) will have the slowest orbital speed.

Orbital speed is the speed at which an object orbits around another object in space. It is determined by the gravitational pull of the central object and the distance between the two objects. The closer an object is to the central object, the faster it must travel to maintain its orbit.

Orbital speed is an important concept in space travel and satellite communication. Satellites in low Earth orbit, for example, must travel at a speed of approximately 7.9 kilometers per second to maintain their orbit. This high speed is necessary to balance the gravitational pull of the Earth and the centrifugal force of the satellite's orbit.

To learn more about Orbital speed visit here:

brainly.com/question/541239

#SPJ4

Answer:

Option (c) is the correct answer.

Explanation: When two substances does not exchange any energy with each other then they are said to be in thermal equilibrium with each other. This means the temperature of both the substances will be equal, that is why, there is no exchange of energy between them. Thus, we can conclude that when the objects have the same temperature then you can tell the two objects are in thermal equilibrium.

a) The maximum magnitude of the electric field in the electromagnetic wave is 1.66 × 10^3 V/m.

b) The peak intensity of the wave is 1.86 × 10^-5 W/m^2 and the average intensity of the wave cannot be determined without additional information.

a) The relationship between the maximum magnitude of the magnetic field (B) and the maximum magnitude of the electric field (E) in an electromagnetic wave is given by E/B = c, where c is the speed of light in a vacuum. Solving for E, we get E = B × c = 499 μT × 3 × 10^8 m/s = 1.66 × 10^3 V/m.

b) The peak intensity of an electromagnetic wave is given by I = (cε0/2) × E^2, where ε0 is the permittivity of free space. Plugging in the given values, we get I = (3 × 10^8 m/s × 8.85 × 10^-12 F/m) / 2 × (374 × 10^-6 T)^2 = 1.86 × 10^-5 W/m^2. The average intensity of the wave cannot be determined without additional information.

For more questions like Wave click the link below:

https://brainly.com/question/25954805

#SPJ11

The largest resistance is [tex]759.0 ω (670+55+34)[/tex] , and the smallest resistance is[tex]19.7 ω (1/((1/34)+(1/55)+(1/670))).[/tex]

To obtain the largest resistance, you simply add all three resistors together. To obtain the smallest resistance, you need to use the formula for calculating resistors in parallel: [tex]1/R(total) = 1/R(1) + 1/R(2) + 1/R(3).[/tex] In this case,[tex]R(1) is 34.0 ω, R(2) is 55.0 ω, and R(3) is 670 ω.[/tex]  Plugging these values into the formula gives you[tex]1/R(total) = 0.0294[/tex] , which simplifies to [tex]R(total) = 34.0 Ω, 55.0 Ω, and 670 Ω.[/tex]

Note that the answer to this question assumes that the resistors are connected in parallel, as that is the only way to calculate the smallest resistance. If the resistors were connected in series, the smallest resistance would be 759.0 Ω and the largest resistance would be 759.0 Ω as well.

Learn more about resistance here:

https://brainly.com/question/30799966

#SPJ11

The speed with which the particles enter the cyclotron is given by:

v = sqrt(2qV / mr).

In a cyclotron, the magnetic field B and the electric field E are perpendicular to each other and to the direction of motion of the particles. The magnetic field causes the particles to move in a circular path, while the electric field accelerates the particles between the two Dees.

The frequency of the electric field is adjusted so that it matches the frequency of the circular motion, causing the particles to gain energy with each pass through the Dees. This leads to an increase in the speed of the particles, which can be calculated using the following equation:

mv^2 / r = qvB

where m is the mass of the particle, v is its speed, r is the radius of the circular path, q is the charge of the particle, and B is the magnetic field.

The radius of the circular path can be expressed as:

r = mv / (qB)

Substituting this expression for r into the first equation, we get:

mv^2 / (mv / (qB)) = qvB

Simplifying and solving for v, we get:

v = sqrt(2qV / mr)

where V is the potential difference applied to accelerate the particles.

Therefore, the speed with which the particles enter the cyclotron is given by:

v = sqrt(2qV / mr)

Note that the speed of the particles will continue to increase as they pass through the Dees, until relativistic effects become significant. At that point, the frequency of the electric field must be adjusted in order to maintain resonance and continue accelerating the particles.

Visit to know more about Speed:-

brainly.com/question/13943409

#SPJ11

Option C is Correct. All three blocks experience the same buoyant force because buoyant force is determined by the volume of the object submerged and the density of the fluid it is submerged in, not the density of the object itself.

The term "buoyancy" refers to the upward force that is produced when an object is displaced by water.

According to Archimedes' principle, it is directly proportionate to the volume (weight) of water being displaced by an object.

As a thing moves more water, the force of buoyancy pushing it upward increases.

The formula gives the buoyancy of an object;

Fb=pgv

Where Fb represents the force of buoyancy that a liquid applies to an object.

g is the gravitationally induced acceleration, and p is the density of the liquid.

V is the volume of the liquid after displacement.

h is the amount of water a piece of equipment has transported.

A is the surface area of the floating object.

The buoyancy scale uses the Newton (N) unit of measurement.

The ice block, which receives the same buoyant force as the other two, has the same volume as the concrete and iron blocks, while having densities that are far more than the fluid's density.

Learn more about buoyant force here

https://brainly.com/question/21990136

#SPJ11

The original concentration of ni2 in the solution was 0.909 mol/L.

To find the original concentration of ni2 in the solution, we need to use Faraday's law of electrolysis, which states that the amount of substance deposited at an electrode during electrolysis is proportional to the amount of electric charge passed through the electrode.

We know that it took 126.5 minutes to deposit all of the nickel from 225 ml of the solution using a current of 5.15 A. We can use the formula Q = I*t, where Q is the electric charge passed through the electrode, I is the current, and t is the time.

Q = 5.15 A * 126.5 min * 60 sec/min = 39,351 C

Next, we need to use the formula relating the amount of substance deposited to the electric charge passed through the electrode:

n = Q/Fz

where n is the amount of substance (in moles) deposited, Q is the electric charge (in coulombs), F is Faraday's constant (96,485 C/mol), and z is the charge on the ion being deposited (in this case, 2+ for ni2).

n = 39,351 C / (96,485 C/mol * 2) = 0.2045 mol

Finally, we can use the formula for concentration:

C = n/V

where C is the concentration (in mol/L), n is the amount of substance (in mol), and V is the volume (in L).

C = 0.2045 mol / 0.225 L = 0.909 mol/L

For more such questions on Concentration.

https://brainly.com/question/12947924#

#SPJ11

The value of t0.05t0.05 for a tt-distribution with 1616 degrees of freedom is  -1.645.

To find the value of t0.05t0.05 for a t-distribution with 1616 degrees of freedom, we need to look up the critical value in a t-distribution table or use a calculator.

Using a calculator, we can input the degrees of freedom (df) as 1616 and the confidence level (α) as 0.05. The formula to calculate the t-score is:

t = invT(α, df)

where invT is the inverse t-distribution function.

Plugging in the values, we get:

t = invT(0.05, 1616)

≈ -1.645

Therefore, the value of t0.05t0.05 for a t-distribution with 1616 degrees of freedom is -1.645 (rounded to three decimal places).

Learn more about t-distribution: https://brainly.com/question/30895354

#SPJ11

Therefore, the mass of the flywheel is approximately 3.7 kg, which corresponds to option (b).

The rotational kinetic energy of the flywheel can be expressed as:

K = [tex](1/2)Iw^2[/tex]

I is the moment of inertia of the flywheel, ω is the angular velocity, and K is the rotational kinetic energy.

The work done on the flywheel can be expressed as:

[tex]W = K_f - K_i[/tex]

K_f is the final kinetic energy of the flywheel (zero in this case) and K_i is the initial kinetic energy of the flywheel (when it was spinning at 500.0 rpm).

The moment of inertia of a solid disk is given by:

I = [tex](1/2)mr^2[/tex]

m is the mass of the disk and r is its radius.

The angular velocity can be converted from rpm to rad/s:

ω = (500.0 rpm) * (2π rad/rev) * (1 min/60 s) = 52.36 rad/s

Here in the given values:

4.2 kJ = [tex](1/2)(1/2)mr^2w^2[/tex]

Solving for m:

m = [tex]2W/(r^2w^2) = 2(4.2 kJ)/(1.2 m)^2(52.36 rad/s)^2[/tex] = 3.7 kg

Learn more about mass visit: brainly.com/question/86444

#SPJ4

To find the correct lens power for the contact lenses, we can use the formula

P = 1/f, where P is the lens power in diopters and f is the focal length in meters.

Follow these steps:

1. Identify the near point: In this case, it's 2.3 meters.

2. Convert the near point to diopters: Diopters (D) = 1 / distance in meters (m). So, Diopters = 1 / 2.3 m ≈ 0.4348 D.

3. Determine the normal near point: The normal near point for most people is 25 centimeters (0.25 meters).

4. Calculate the normal near point in diopters: Normal Diopters = 1 / 0.25 m = 4 D.

5. Find the lens power needed: Lens Power = Normal Diopters - Near Point Diopters = 4 D - 0.4348 D ≈ 3.5652 D.

The correct choice of lens power for the contact lenses is approximately +3.57 D.

To know more about farsightedness visit:

https://brainly.com/question/30513666

#SPJ11

The value of lo is -8.48 A, which is approximately equal to -8.5 A. Option c is correct.

To find the value of current,

I = V/Z

Where V is the voltage amplitude, Z is the impedance of the circuit, and I is the current amplitude.

Impedance (Z) of a series LCR circuit is given by,

Z = sqrt((R^2)+((wL)-(1/(wC)))^2)

Where R is the resistance, L is the inductance, C is the capacitance, w is the angular frequency (2pif), and f is the frequency of the sinusoidal voltage.

Substituting the given values,

w = 200 rad/s

R = 40 ohms

L = 160 mH = 0.16 H

C = 100 F = 0.0001 F

V = 40 V

Z = sqrt((40^2)+((2000.16)-(1/(2000.0001)))^2) = 50 ohms

Now, we can find the current amplitude as,

I = V/Z = 40/50 = 0.8 A

So, the current amplitude is 0.8 A.

Next, we need to find the phase angle (phi) between the voltage and current.

tan(phi) = ((wL)-(1/(wC)))/R

Substituting the given values,

tan(phi) = ((2000.16)-(1/(2000.0001)))/40 = 1.6

phi = tan^-1(1.6) = 57.99 degrees

So, the phase angle is 57.99 degrees.

Now, we can use the given equation for the current to find the value of lo,

1(t) = 10 sin(wt-phi)

At t=0, sin(wt-phi) = sin(-phi) = -sin(phi) = -0.848

So, 1(0) = 10*(-0.848) = -8.48 A

Therefore, the value of lo is -8.48 A, which is approximately equal to -8.5 A. Option c is correct.

To know more about LCR circuit, here

brainly.com/question/24477599

#SPJ4

The value of efficiency (η) in a DC motor can be calculated using the formula η = Pout / Pin, where τs is stall torque and ωn is no load speed.

To calculate the efficiency in a DC motor, follow these steps:

1. Determine the mechanical power output (Pout) by multiplying the stall torque (τs) by the no load speed (ωn) and dividing by 2: Pout = (τs × ωn) / 2

2. Measure the electrical power input (Pin) to the motor.

3. Calculate the efficiency (η) by dividing the mechanical power output (Pout) by the electrical power input (Pin): η = Pout / Pin

Efficiency indicates the ratio of useful mechanical power output to the electrical power input, and it is typically expressed as a percentage. A higher efficiency means the motor converts more electrical energy into mechanical energy, reducing energy waste.

To know more about  stall torque click on below link:

https://brainly.com/question/31325441#

#SPJ11

The temperature range over which a nichrome wire resistor can be used without changing its resistance by more than 1.00Ω from its value at 20°C depends on its TCR. The specific TCR of the wire needs to be known to determine the range.

The resistance of a conductor, such as a nichrome wire resistor, changes with temperature. The temperature coefficient of resistance (TCR) is a measure of this change, typically expressed in parts per million per degree Celsius (ppm/°C). A resistor made of nichrome wire is used in an application where its resistance must not change by more than 1.00Ω from its value at 20°C. The temperature range over which it can be used without exceeding this limit depends on the TCR of the wire. The specific TCR of the wire needs to be known to calculate the temperature range. For example, if the TCR of the wire is 500 ppm/°C, the temperature range over which it can be used without exceeding the 1.00Ω limit would be approximately 40°C.

Learn more about temperature range here:

https://brainly.com/question/31458330

#SPJ11

By following these , you can compute the maximum stress due to bending in the bar.

Apply the bending stress formula to find the maximum stress: σ = (M * c) / I.

To compute the maximum stress due to bending in the bar, we can follow these steps:

Identify the bending moment (M) at the point where maximum stress occurs. In this case, we have two forces acting on the bar: 840 N and 600 N. Since both forces are at equal distances from the ends (400 mm), the bending moment will be maximum at the center of the bar.

Calculate the bending moment (M) at the center of the bar. M = (840 N * 400 mm) - (600 N * 400 mm) = 96,000 Nmm.

Calculate the moment of inertia (I) for the bar's cross-sectional area. Since we're given a typical T-shaped cross-section, we can calculate I using the parallel axis theorem: I = I_center + A * d^2, where I_center is the moment of inertia of the individual rectangles about their own centroidal axes, A is the area of each rectangle, and d is the distance between the centroids of each rectangle and the centroid of the entire cross-section.

Compute the distance (c) from the neutral axis to the farthest point of the cross-section. In this case, c is half the height of the T-shape, which is 45 mm / 2 = 22.5 mm.

Apply the bending stress formula to find the maximum stress: σ = (M * c) / I.

By following these steps, you can compute the maximum stress due to bending in the bar.

Learn more about stress.

brainly.com/question/31366817

#SPJ11

(a) The path followed by a charged particle moving through a magnetic field is a circle with radius r given by:

r = mv / (qB)

where m is the mass of the particle, v is its velocity, q is its charge, and B is the magnetic field strength.

In this case, the particle is an alpha particle with charge q = 2e, where e is the elementary charge. The velocity of the particle is v = 35.6 km/s = 35.6 × 10^3 m/s, and the magnetic field strength is B = 1.80 T. The mass of the alpha particle is m = 6.64 × 10[tex]^-27 kg.[/tex]

Substituting the given values into the equation for the radius, we get:

r = (m v) / (q B)  ≈ 3.03 cm

Therefore, the diameter of the path followed by the alpha particle is approximately 6.06 cm.

(b) The magnetic field does not change the speed of the alpha particle, only its direction. This is because the magnetic force acts perpendicular to the velocity of the particle, causing it to move in a circular path but not changing its speed.

(c) The magnitude of the acceleration experienced by a charged particle moving through a magnetic field is given by:

a = (qB/m) v

where q is the charge of the particle, B is the magnetic field strength, m is the mass of the particle, and v is its velocity.

In this case, the charge of the alpha particle is q = 2e, where e is the elementary charge, the magnetic field strength is B = 1.80 T, the mass of the alpha particle is m = 6.64 × 10[tex]^-27[/tex]kg, and the velocity is v = 35.6 × 10[tex]^3 m/s.[/tex]

Substituting the given values into the equation for acceleration, we get:

The direction of the acceleration is given by the right-hand rule: if you point your right thumb in the direction of the velocity of the particle (horizontal in this case), and your fingers in the direction of the magnetic field (vertical in this case), then the direction of the acceleration is perpendicular to both, pointing into the plane of the circle.

(d) The speed of the alpha particle does not change because the magnetic force acting on the particle is perpendicular to its velocity. Since the force is always perpendicular to the direction of motion, it does no work on the particle and therefore does not change its kinetic energy or speed. The magnetic force only changes the direction of the velocity, causing the particle to move in a circular path.

learn more about   magnetic field here:

https://brainly.com/question/14411049

#SPJ4

Jupiter is substantially more massive than Earth and has a bigger orbit. It has no solid surface and is primarily made of gas.

Scientist Alan Boss estimates that the gas giant is around 318 times as large as Earth (opens in new tab). Jupiter would still be 2.5 times as big if the masses of all the other planets in the solar system were united into one "super planet."

The gas giant Jupiter is the most massive planet in our solar system, with a mass that is 2.5 times that of all the other planets put together. Hydrogen and helium, which make up 87% of Jupiter's atmosphere, make up the majority of its mass, with other gases making up a significantly smaller percentage.

To know more about the Jupiter visit:

https://brainly.com/question/3460304

#SPJ1

The point's tangential speed is approximately 1.34 m/s.

To solve this problem, we need to use the formula for centripetal acceleration:

a = v^2/r

where a is the centripetal acceleration, v is the tangential speed, and r is the radius of the wheel.

We are given that the radius of the wheel is 1.5 m and the centripetal acceleration is 1.2 m/s^2. Plugging these values into the formula, we get:

1.2 = v^2/1.5

Simplifying, we get:

v^2 = 1.8

Taking the square root of both sides, we get:

v = 1.34 m/s

Therefore, the point on the rim of the wheel has a tangential speed of 1.34 m/s.

To know more about tangential speed click on below link :

https://brainly.com/question/28020464

#SPJ11

This statement is known as Pascal's Law, which states that any change in pressure applied to a confined fluid will be transmitted equally and uniformly in all directions throughout the fluid.

This means that if pressure is increased at one point in the fluid, it will be transmitted to all other points in the fluid. This is because fluids are considered incompressible, meaning that they cannot be easily compressed or squished together. Therefore, any change in pressure must be transmitted equally throughout the fluid.

This law has many practical applications in engineering, such as in hydraulic systems where pressure is used to move liquids or gases.

For example, in a car's braking system, applying pressure to the brake pedal increases pressure in the brake fluid, which is then transmitted uniformly throughout the brake lines to apply pressure to the brake pads, slowing the car down.

Understanding Pascal's Law is important for ensuring the proper function and safety of many mechanical systems.

To know more about Pascal's Law refer here:

https://brainly.com/question/29875098#

#SPJ11

To determine the excited state of the hydrogen atom after the electron with energy 12.09 eV strikes it,

1. Determine the energy levels of the hydrogen atom using the formula E_n = -13.6 eV / n^2, where E_n is the energy at the nth level and n is the principal quantum number.
2. Calculate the difference in energy levels between the ground state (n = 1) and each possible excited state.
3. Compare the energy difference to the energy provided by the electron (12.09 eV) and find the state that matches or is just below this value.

Using this process:

A) Fourth state (n = 4): E_4 = -13.6 / 4^2 = -0.85 eV
Energy difference = |-13.6 - (-0.85)| = 12.75 eV

B) Third state (n = 3): E_3 = -13.6 / 3^2 = -1.51 eV
Energy difference = |-13.6 - (-1.51)| = 12.09 eV

C) Second state (n = 2): E_2 = -13.6 / 2^2 = -3.4 eV
Energy difference = |-13.6 - (-3.4)| = 10.2 eV

D) First state (n = 1): No energy difference, as it is the ground state.

Since the energy difference between the ground state and the third state is equal to the energy provided by the electron (12.09 eV), the hydrogen atom is excited to the Third state. So the correct answer is:

Your answer: B) Third state.

To know more about Principal quantum number:

https://brainly.com/question/16746749

#SPJ11

the magnitude of the electric field at the position of the charge is 1.2×10^3 N/C.

The magnitude of the electric field at the position of the charge can be found using the equation E = F/q, where E is the electric field, F is the electric force, and q is the charge. Substituting the given values, we get:

E = F/q = (1.5×10^-3 N) / (1.25×10^-6 C) = 1.2×10^3 N/C

Therefore, the magnitude of the electric field at the position of the charge is 1.2×10^3 N/C.
Hi! To find the magnitude of the electric field at the position of the charge, you can use the following formula:

Electric field (E) = Electric force (F) / Charge (q)

You are given the electric force experienced by a charge (F) as 1.5×10^−3 N and the charge (q) as 1.25×10^−6 C. Now, plug in these values into the formula:

E = (1.5×10^−3 N) / (1.25×10^−6 C)

E = 1.2×10^3 N/C

Learn more about magnitude  here:

https://brainly.com/question/14452091

#SPJ11

The total energy of a binary system where both objects (m1, m2) are moving can be expressed as E = 1/2 µv² - GMµ/ r

where µ is the reduced mass of the system, given by µ = m1m2/ (m1 + m2), v is the relative velocity between the two objects, G is the gravitational constant, M is the mass of the fixed object around which the binary system is orbiting, and r is the distance between the two objects.

This expression for the total energy is a combination of the kinetic energy of the system, given by 1/2 µv², and the potential energy of the system, given by -GMµ/ r.

The kinetic energy represents the energy due to the motion of the objects relative to each other, while the potential energy represents the energy due to the gravitational attraction between the two objects.

This expression applies to the general case of elliptical orbits, where the distance between the two objects changes over time.

As the objects move closer together, the potential energy increases, while the kinetic energy decreases, and vice versa as they move further apart. However, the total energy of the system remains constant over time, as required by the conservation of energy principle.

To know more about conservation of energy click on below link:

https://brainly.com/question/2137260#

#SPJ11

You would need to do 420.21 J of work to push the 11.0 kg block of steel across the steel table at a steady speed of 1.10 m/s for 5.90 s.

To calculate the work required to push the block of steel across the table, we need to use the formula: Work = Force x Distance.

First, we need to find the force required to overcome the friction between the block and the table.

We can use the formula:

Force of friction = coefficient of kinetic friction x normal force.

The normal force is equal to the weight of the block, which is given by:

Weight = mass x gravity = 11.0 kg x 9.81 m/s^2 = 107.91 N.

Therefore, the force of friction is:

Force of friction = 0.60 x 107.91 N = 64.746 N.

Since the block is moving at a steady speed of 1.10 m/s, the net force acting on it must be zero.

Therefore, the force required to push the block is equal to the force of friction:

Force = 64.746 N.

Now we can calculate the work required using the formula: Work = Force x Distance.

The distance traveled by the block during the 5.90 s is:

Distance = Speed x Time = 1.10 m/s x 5.90 s = 6.49 m.

Therefore, the work required to push the block is:

Work = 64.746 N x 6.49 m = 420.21 J.

Learn more about work done at

https://brainly.com/question/29566762

#SPJ11

In summary, the work needed to turn the generator is related to Lenz's Law because it involves overcoming the opposing force created by the induced EMF and current in the coil, as described by Lenz's Law.

The work needed to turn the generator is related to Lenz's Law through the following process:

1. A generator converts mechanical energy into electrical energy by rotating its coils within a magnetic field.
2. As the coil rotates, the magnetic field induces an electromotive force (EMF) and a current in the coil, according to Faraday's Law of electromagnetic induction.
3. Lenz's Law states that the induced EMF and current will generate a magnetic field that opposes the change in magnetic flux that produced it.
4. This opposition creates a force that resists the rotation of the generator's coils, which is called the "back EMF" or "counter EMF."
5. The work needed to turn the generator is directly related to overcoming this back EMF, as it is the force that opposes the rotation of the coils.

In summary, the work needed to turn the generator is related to Lenz's Law because it involves overcoming the opposing force created by the induced EMF and current in the coil, as described by Lenz's Law.

#SPJ11

For more information on generator and lenz's law refer to  https://brainly.com/question/29202369