A force is used to lift mass to a height of 8 m does 1040 J of work. How much force is used?

Answers

Answer 1

Answer:

[tex]\boxed {\boxed {\sf 130 \ Newtons }}[/tex]

Explanation:

Work is the energy transferred to or from an object when force is applied to cause displacement. It is the product of force and displacement.

[tex]W=F*s[/tex]

The displacement (s) is 8 meters and the work (W) is 1,040 Joules. Substitute these values into the formula.

[tex]1040 \ J= F* 8 \ m[/tex]

First, let's convert the units. This will make the question easier later on. 1 Joule is equal to 1 Newton meter, so the 1040 J of work equal 1040 N*m.

[tex]1040 \ N*m= F * 8 \ m[/tex]

Since we are solving for the force (F), we must isolate the variable. It is being multiplied by 8 meters and the inverse of multiplication is division. Divide both sides by 8 m.

[tex]\frac {1040 \ N*m}{8 \ m}= \frac{F * 8 \ m}{8 \ m}[/tex]

[tex]\frac {1040 \ N*m}{8 \ m}=F[/tex]

The meters cancel out, hence our earlier unit conversion.

[tex]130 \ N = F[/tex]

A force of 130 Newtons is used.


Related Questions

In a car collision, is it better for the passenger if the change in momentum is over a short period of time or a long period of time?

Answers

Explanation:

The force on the passenger will be F = ma

Here, m does not change, but a is the variable.

If the cars slows down very fast, the acceleration will be higher, and thus the force will be higher.

If the acceleration is lower, the force will be lower as well, which would be the most desirable scenario for the passenger.

The _____ of a mechanical wave is a direct measure of its energy.

speed

frequency

amplitude

hertz

Answers

The answer is amplitude. “Amplitude of a wave is a direct measure of its energy. The amplitude of transverse waves is the maximum distance the medium moves up or down from its rest position.”

Which two structures are not found in animal cells?
A) vacioles and ribosomes
B) chloroplasts and ribosomes
C) cell walls and chloroplasts
D) endoplasmic reticulum and cell walls

Answers

Answer:

C

Explanation:

So, lets start off by thinking about what we know is in both cells, and rule out from there.

There are just some basic things you need in eukaryotic cells, those include the following:

Nucleuscell membranemitochondriacytoplasm(dont get confused with chloroplast)Rough and smooth endoplasmic reticulumGolgi vescileGolci apparatusNucleolus(Dont get confused with nulceus)

Here are jsut a few examples of what can be found in both plant and animal cells, however we can already rule out all of the following except for:

C

Because remember, c talks about the chlorplast, which is not the chlorplasm found in both plant anf animal cells, its just the chloroplast found in plant cells.

Although I gave the asnwer to you. Here are some things that are in plant cells that arent in animal cells:

Cell wallvaciolescentral vaciolechlroplastplastids

Animal cells on the other hand, have a few things that plant cells do not as well:

LysomeCentrolsome

Hope this helps! ;)

which apparatus is used to measure mass of a bread

Answers

Explanation:

a triple beam balance can measure the mass of one slice of bread

1.What is the kinetic energy of an object with a velocity of 7m / s and a mass of 14kg
2. What is the kinetic energy of an object with a velocity of 5m / s and a mass of 5kg
Helppppp!

Answers

Answer:

Explanation:

The formula for KE is

[tex]KE=\frac{1}{2}mv^2[/tex] and we fill in to solve for KE:

[tex]KE=\frac{1}{2}(14)(7.0)^2[/tex] I used 2 significant digits in the velocity because 1 isn't accurate enough. Therefore, my answer will be rounded to 2 sig fig's:

KE = 340 J (rounded from 343). And we do the exact same thing in #2:

[tex]KE=\frac{1}{2}(5.0)(5.0)^2[/tex] (Used 2sig fig's for both the mass and the velocity) to get

KE = 63 J (rounded from 62.5)

If a cart at the top of a hill has 50 newtons of pot. energy what will it have when it comes down?

Answers

Answer:

50 newtons of kenetic energy?? im guessing ngl

Explanation:

I'm stuck between B and C

In the problem, I know the potential energy increases because the height increases.

A block is at the bottom of a frictionless ramp and is given a kick so that it has some initial velocity and starts to slide up the ramp. There
is no air resistance. Which of the following is true of the energy of the block as it slides?
(A) Its potential energy will increase; its kinetic energy will decrease.
(C) Both its potential and kinetic energies will increase.
(B) Its potential energy will decrease; its kinetic energy will increase.
(D) Both its potential and kinetic energies will decrease.

Answers

Answer:

Explanation:

The answer is A. First of all, due to the First Law of Thermodynamics, energy cannot be created or destroyed, it only changes form. That being said, it is impossible for the PE and the KE to both increase or decrease at the same time. The second one starts decreasing, the other starts increasing at the exact same rate. PE exists or is at its highest when an object has the potential to fall to a point lower than it is, and it is at this point where Kinetic energy is the lowest. If this block is kicked UP a ramp, which is odd but there you have it, the potential energy increases as it gets higher off the ground. Because of gravity, and assuming that once the block is kicked, the foot that kicked it is no longer important to it (meaning it's not being pushed up, it's just kicked once and that's it) and it will slow down very quickly. KE exists where there is a great amount of velocity.

The answer is A.

discuss impact of Newton's second law on roads​

Answers

Answer:

The second law: When a force is applied to a car, the change in motion is proportional to the force divided by the mass of the car. This law is expressed by the famous equation F = ma, where F is a force, m is the mass of the car, and a is the acceleration, or change in motion, of the car

A wheelbarrow can be used to help lift a load, such as a pile of dirt, and then push the load across a distance. A man pushes a wheelbarrow.

Answers

Answer:

B.) a wheel and axle and a lever

Explanation:

P.S - The exact question is -

Given - A wheelbarrow can be used to help lift a load, such as a pile of dirt, and then push the load across a distance. A man pushes a wheelbarrow.

To find - Which simple machines make up a wheelbarrow?

A.) a pulley and an inclined plane

B.) a wheel and axle and a lever

C.) a pulley and a wheel and axle

D.) a lever and a wedge

Proof -

The correct option is - B.) a wheel and axle and a lever

Wheelbarrows are used to carry more goods from place to place by using minimal force as compared when goods are carried by hand.

With this machine, During hauling people can save time.

Answer:

B.) a wheel and axle and a lever

Explanation:

You hold an object up with a spring scale and it reads 5N.
What is the mass of the object?

Answers

Answer:

balance

Explanation:

A uniform electric field, with a magnitude of 449 N/C, is directed parallel to the positive x-axis. If the potential at x= 4.59 m is 966 V, what is the potential at x= 1.61 m?

Answers

Answer:

2.334‬ kV

Explanation:

Since the electric field strength Ecosθ = -ΔV/Δx = -(V₂ - V₁)/(x₂ - x₁)

where V₁ = potential at x₁ = 966 V, x₁ = 4.59 m, V₂ = potential at x₂ = unknown, x₂ = 1.61 m and θ = angle between E and the x - axis.

Given that E = + 449 N/C and since it is directed parallel to the positive x - axis, θ = 0°

So,

Ecosθ = -ΔV/Δx

Ecos0° = -ΔV/Δx

E = -ΔV/Δx

E = -(V₂ - V₁)/(x₂ - x₁)

making V₂ subject of the formula, we have

-E(x₂ - x₁) = V₂ - V₁

-E(x₂ - x₁) + V₁ = V₂

V₂ = V₁ - E(x₂ - x₁)

Substituting the values of the variables into the equation, we have

V₂ = V₁ - E(x₂ - x₁)

V₂ = 966 V - 449 N/C(1.61 m - 4.59 m)

V₂ = 966 V - 449 N/C(-2.98 m)

V₂ = 966 V + 1,338.02‬ Nm/C

V₂ = 966 V + 1,338.02‬ V

V₂ = ‭2,334.02‬ V

V₂ ≅ ‭2,334‬ V

V₂ = ‭2.334‬ kV

GIVING BRAINLIEST PLEASE HELP!!
-if you answer correctly ill give you brainliest which will give you 25pts-

Answers

Answer:

b and d :)

Explanation:

Answer:

A, B, And C,

Explanation:

The law of conservation of energy is a physical law that states energy cannot be created or destroyed but may be changed from one form to another. Another way of stating this law of chemistry is to say the total energy of an isolated system remains constant or is conserved within a given frame of reference.

Maria's mother was deported 6 months ago, and she is staying with a cousin. She has to share a room with 3 other children and is very discouraged. She has little energy to do much of anything, and she cries a lot. She is probably suffering from?

Answers

The answer would be A.

She is probably suffering from a major depression. Depression results in emotional change and loss of interest in previously appreciated activities.

What is depression?

Depression is a frequent and significant medical ailment that has an adverse effect on how you feel, think, and act. It can cause a number of mental and physical difficulties, as well as a loss in your ability.

According to epidemiological research, a hereditary element is involved in 30% to 40% of instances of bipolar illness. As a result, environmental influences have a larger role in the development of depression.

Maria's mother was deported 6 months ago, and she is staying with a cousin. She has to share a room with 3 other children and is very discouraged.

She has little energy to do much of anything, and she cries a lot, she is probably suffering from a major depression.]

Hence, option A is correct.

To learn more about the depression, refer to the link;

https://brainly.com/question/9790235

#SPJ2

Boxers wear gloves that are padded to lessen the force of a punch. Calculate the force exerted by a boxing glove on an opponent's face, if the glove and face compress 8.50 cm during a blow in which the 7.00-kg arm and glove are brought to rest from an initial speed of 10.0 m/s. Give your answer in Newtons, do not include the unit in your answer.

Answers

Answer:

F = 4117.64

Explanation:

First, we will calculate the acceleration of the hand, by using the third equation of motion:

[tex]2as = v_f^2 - v_i^2\\[/tex]

where,

a = acceleration = ?

s = distance covered = compression = 8.5 cm = 0.085 m

vf = final speed = 0 m/s

vi = iniial speed = 10 m/s

Therefore,

[tex]2a(0.085\ m) = (0\ m/s)^2-(10\ m/s)^2\\a = - 588.23\ m/s^2[/tex]

negative sign hows deceleration.

Now, we will calculate the force exerted by the hand:

[tex]F = ma = (7\ kg)(588.23\ m/s^2)\\[/tex]

F = 4117.64 N

Which of the following statements is true for a ball thrown vertically upward

Answers

What are the word answers?

A bat produces a sound at 17,250Hz and wavelength 0.019m. What is
the speed of the sound?

Answers

Explanation:

v = f × /\

v = 17250 × 0.019

v = 327.75ms²

A produces a sound at a frequency of 17,250 Hz and wavelength of 0.079 m then the speed of sound will be equal to 327.75 m/s².

What is Wavelength?

The distance between two identical locations (adjacent crests) in successive cycles is known as the wavelength, and it is used to describe waveform signals that are transmitted over wires or into space. Typically, in wireless systems, this length is specified in meters (m), centimeters (cm), or millimeters (mm). The wavelength is more frequently described in nanometers (nm), which are units of 10⁻⁹ m, or angstroms, which are units of 10⁻¹⁰ m, for infrared (IR), visible light (UV), and gamma radiation.

As per the given information in the question,

Frequency, f = 17,250 Hz

The wavelength λ = 0.019 m

Then the speed of the sound (v) will be,

v = f × λ

v = 17250 × 0.019

v = 327.75 m/s²

To know more about Wavelength:

https://brainly.com/question/13533093

#SPJ2

Utility companies charge by the kilowatt-hour. The number of kilowatt-hours used equals the number of kilowatts multiplied by the number of hours an electrical device was used. How long would it take for a 50-watt fan to use 1 kilowatt-hour of electricity? (Hint: 50 watts = 0.05 kilowatts.)

Answers

Answer:

t = 3 minutes

Explanation:

Given that,

Power of fan, P = 50 W

Energy used, E = 1 kWh

We know that,

Energy = Power/time

As, 50 watts = 0.05 kilowatts

So,

[tex]t=\dfrac{P}{E}\\\\t=\dfrac{0.05\ kW}{1\ kWh}\\\\t=0.05\ h[/tex]

or

t = 3 min

So, the required time is equal to 3 minutes.


a) How is the single covalent bond usually shown in each diagram?​

Answers

Single bonds are represented in drawn structures by one line segments which connects two pairs of Adams kind a like this. H
|
H — C — H
|
H

this questions pls help

Answers

Answer:

1. True

2. False

3. True

4. True

5. False

True, False, True, True, False :) !

A 200kg bumper car moving 3 m/s collides head on with a 392kg bumper car moving 6m/s. After impact, the larger car continues traveling in the same direction with a velocity of 1.6 m/s . Determine the speed of the other car.

Answers

Answer:

the final speed of the smaller car is 5.624 m/s

Explanation:

Given;

mass of the small car, m₁ = 200 kg

initial velocity of the small car, u₁ = 3 m/s

mass of the larger car, m₂ = 392 kg

initial velocity of the larger car, u₂ = 6 m/s

final velocity of the larger car, v₂ = 1.6 m/s

let the direction of the larger car be positive

let the direction of the smaller car be negative

Apply the principle of conservation of linear momentum to determine the final speed of the smaller car.

m₁u₁ + m₂u₂ = m₁v₁  +  m₂v₂

200(-3)  +  392(6)  = 200v₁   +  392 x 1.6

-600 + 2352  = 200v₁    +  627.2

1752   =  200v₁     +   627.2

1752  -  627.2     =  200v₁

1124.8  = 200v₁

v₁  =  1124.8/200

v₁ = 5.624 m/s

Therefore, the final speed of the smaller car is 5.624 m/s

Which object is an example of a mechanical wave?

A. light from a flashlight

B. microwaves used to heat food

C. police siren

D. sunlight​

Answers

Answer:

C.

Explanation:

Hope It Helps

brainliest please

Answer:

C. police siren

Explanation:

Sound waves are mechanical waves

Help Me!! 50pts
It will mean a lot

Answers

Answer: Full Moon

Explanation:
The image below will help you!

Explanation:

full moon

The kinetic theory describes the __1__ of particles in matter and the forces of attraction between them. The theory assumes that the volume occupied by a gas is mostly __2__, that the particles of gas are relatively __3__, move __4__ of each other, and are in constant __5__ motion. The __6__ between particles are perfectly elastic so that the total __7__ remains constant. Gas pressure results from the simultaneous collisions of billions of particles with an object. Barometers are used to measure __8__ pressure. Standard conditions are defined as a temperature of __9__ and a pressure of __10__.

Answers

Answer:

1. Motion

2. Empty space

3. Far apart

4. Independently

5. Random or rapid

6. Collision

7. Kinetic energy

8. Atmospheric

9. 273 Kelvin or 0° Celsius

10. 1 atm, 101.3 kPa or 760 mmHg

Explanation:

In science, matter can be defined as anything that has mass and occupies space. Any physical object that is found on earth is typically composed of matter. Matter are known to be made up of atoms and as a result has the property of existing in states.

Generally, matter exists in three (3) distinct or classical phases and these are;

I. Gas.

II. Solid.

III. Liquid.

Filling the missing words or texts in the question, we have;

The kinetic theory describes the motion of particles in matter and the forces of attraction between them. The theory assumes that the volume occupied by a gas is mostly empty space, that the particles of gas are relatively far apart, move independently of each other, and are in constant random or rapid motion. The collision between particles are perfectly elastic so that the total kinetic energy remains constant. Gas pressure results from the simultaneous collisions of billions of particles with an object. Barometers are used to measure atmospheric pressure. Standard conditions are defined as a temperature of 273 Kelvin or 0° Celsius and a pressure of 1 atm, 101.3 kPa or 760 mmHg.

Suppose you needed to push a 1,500-N sofa up a frictionless ramp with a 30° angle. How much force would you have to apply to the sofa?Show your work below.

Answers

Answer:

1299N

Explanation:

GIven data

Weight W= 1500N

Angle Ф= 30°

The applied force up the frictionless ramp is gotten by applying the formula below

F= WcosФ

substitute

F=1500 cos 30

F = 1500*0.8660

F= 1299N

Hence the applied force is 1299N

A microphone is attached to a spring that is suspended from the ceiling, as the drawing indicates. Directly below on the floor is a stationary 375-Hz source of sound. The microphone vibrates up and down in simple harmonic motion with a period of 1.80 s. The difference between the maximum and minimum sound frequencies detected by the microphone is 2.75 Hz. Ignoring any reflections of sound in the room and using 343 m/s for the speed of sound, determine the amplitude (in m) of the simple harmonic motion.

Answers

Answer:

[tex]0.361\ \text{m}[/tex]

Explanation:

[tex]f_s[/tex] = Frequency of source = 375 Hz

[tex]\Delta f[/tex] = Difference between the maximum and minimum sound frequencies = 2.75 Hz

v = Speed of sound in air = 343 m/s

T = Time period = 1.8 s

[tex]v_m[/tex] = Maximum speed of the microphone

We have the relation

[tex]\Delta f=2f_s\dfrac{v_m}{v}\\\Rightarrow v_m=\dfrac{\Delta fv}{2f_s}\\\Rightarrow v_m=\dfrac{2.75\times 343}{2\times 375}\\\Rightarrow v_m=1.26\ \text{m/s}[/tex]

Amplitude is given by

[tex]A=\dfrac{v_mT}{2\pi}\\\Rightarrow A=\dfrac{1.26\times 1.8}{2\pi}\\\Rightarrow A=0.361\ \text{m}[/tex]

The amplitude of the simple harmonic motion is [tex]0.361\ \text{m}[/tex].

Why are solar storms a concern to Earth?

Answers

Solar radiation can cause an EMP effect and knock out electric grids.

What is a mechanical advantage?

Answers

The answer is C I think

Answer:

B

Explanation:

 A Mechanical Advantage is when you use a piece of machinery to help you do work, and it is an easy advantage.

Two neutral objects - object A and object B - are rubbed together. During the process,
electrons are transferred from object A to object B. This would cause object A to acquire
a charge and object B to acquire a charge.

Answers

Answer:

I think it is + and + I could be wrong but I hope it helps

Help please:A boy weighing 30 kg rides a scooter. The total kinetic energy of the boy and the scooter is 437.6 J. Determine the speed at which the boy moves if the mass of the scooter is 5kg?​

Answers

Answer:

5 m/s

Explanation:

Mass of the boy + scooter system =  35 kg

Kinetic Energy =  437.6 J

437.6 = [tex]\frac{1}{2} 35 {v}^2[/tex]

25.0057143 = [tex]v^{2}[/tex]

v = 5 m/s

heena wants to measure the volume of a ball that is 24 cm across. How should she set up her equation? v = one-third pi 24 squared (12). v = one-third p 12 squared (24). v = four-thirds pi 24 cubed. v = four-thirds pi 12 cubed.

Answers

Answer:

v = four-thirds pi 12 cubed.

Explanation:

A ball has a spherical shape. The volume of a spherical shape can be calculated using the following formula:

[tex]V = \frac{4}{3} \pi r^3[/tex]

where,

V = Volume of Ball = ?

d = diameter of the ball = length across the ball = 24 cm

r = radius of ball = d/2 = 24 cm/2 = 12 cm

Therefore,

[tex]V = \frac{4}{3}\pi (12)^3[/tex]

Hence, the correct answer is:

v = four-thirds pi 12 cubed.

Other Questions
she sang sweet or she sang sweetly? What's something you liked or found interesting about any one of the episodes of the aquarium? (Make sure to write at least 4 sentence). What type of physical evidence is acquired through the senseshelp quick What political party is considered pro-business and supports lower taxes? A ball bounces several times after it is dropped. The graph shows the height of the ball over time. Height is measured in meters and time is measured in seconds.Select all statements that are true about the graph and the situation it represents. can someone pls help me Copper and nickel electroless plating processes are under consideration for printed circuit boards. The copper process has fixed costs of $110,000 per year with a variable cost of $50 per batch. The nickel process has a fixed cost of $85,000 per year and a variable cost of $90 per batch. Determine the number of batches that must be produced each year in order for the processes to break even. Ms. Chang has 16 students in her class. She wants to send 3 of her students to pick up books for the class. How many combinations of students can she choose? Determine whether these two triangles are similar, and if so what is the ratio of their sides?Yes, ratio = 3/4Yes, ratio = 3/8Yes, ratio = 4/5No, these triangles are not similar I have 48 candys for 50cents each, how much total will I have after I sell all 48 candies? What is the opinion that David Ellis has about technology Please answer me whats the answer for this ? Complete.write the word or phrase from the word bank the best completes each sentence. A mixture of water and water vapor is present in a closed vessel at 20 degrees Celsius. the total pressure of the system is 755.0 mmHg. Partial pressure of water vapor at 20 degrees Celsius equals 17.5 mm Hg. What is the partial pressure of H2 Which biome receives the most rain?tropical rain foresttemperate rain foresttaigatundra Summarize three reasons why it is important to use critical thinking. Which statement Is always true?The sum of two Irrational numbers is rational.The product of a rational and irrational number is rational.The sum of two rational numbers is irrational.The product of two rational numbers is rationall When planning your App what difficulties did come across and why? identify 2 people that were involved in the explorations west. what did they do to tribute? Andre is making paper cranes to decorate for a party. He plans to make one large papercrane for a centerpiece and several smaller paper cranes to put around the table. It takesAndre 10 minutes to make the centerpiece and 3 minutes to make each small crane. He willonly have 30 minutes to make the paper cranes once he gets home.1. Andre wrote the inequality to plan his time. Describe what , , 10,and 30 represent in this inequality.2. Solve Andres inequality and explain what the solution means.