A cross-connection is defined as a connection between?
a)A high pressure system and a low-pressure system
b) Two different sized pipes
c) A potable water system and a source of contamination
d) Two intersecting pipes

Answers

Answer 1

A cross-connection is defined as a connection between a potable water system and a source of contamination. Option C is correct.

A cross-connection refers to a physical connection or arrangement between a potable water system (i.e., a system that provides water that is suitable for drinking, cooking, and other domestic uses) and a potential source of contamination.

This can occur when there is a connection between a potable water supply and a non-potable source such as a contaminated water system, industrial process, irrigation system, or other sources which may introduce contaminants into the drinking water supply.

Cross-connections pose a risk of contaminating the potable water supply and can potentially lead to waterborne diseases or other health hazards. Therefore, it is essential to properly manage and prevent cross-connections to ensure the safety and quality of drinking water.

Hence, C. is the correct option.

To know more about cross-connection here

https://brainly.com/question/31559171

#SPJ1


Related Questions

3.4. Mortise-and-tenon joints were used in most 18th century timber framing because A. it was the easiest type of joint to produce with the available tools. B. joint strength could not be achieved by any other method. C. metal fasteners were scarce.
D. appearance was of primary importance.

Answers

The answer to the question is D. Appearance was of primary importance because of which Mortise-and-tenon joints were used in most 18th century timber framing

Mortise-and-tenon joints were commonly used in 18th century timber framing because they provided a strong and durable joint, but they also allowed for a clean and aesthetically pleasing appearance. While metal fasteners were scarce at the time, it was not the only reason for the use of this joint. The use of mortise-and-tenon joints was also a reflection of the craftsmanship and skill of the builders who wanted to create a lasting and visually appealing structure. Additionally, the tools needed to make mortise-and-tenon joints were readily available and could easily be produced with the primitive tools of the time.

To learn more about metal click here https://brainly.com/question/29404080

#SPJ11

How many carbon atoms are there in 15 lbs of sugar, C12H22O11?A) 4.1 x 1028 C atoms D) 2.6 x 1022 C atomsB) 1.2 x 1026 C atoms E) 3.2 x 1023 C atomsC) 1.4 x 1026 C atoms

Answers

To calculate the number of carbon atoms in 15 lbs of sugar, we need to first determine the molar mass of C₁₂H₂₂O₁₁ and the number of moles of C₁₂H₂₂O₁₁ in 15 lbs of the compound.

To determine the number of carbon atoms in 15 lbs of sugar (C₁₂H₂₂O₁₁), we need to first calculate the molar mass of C₁₂H₂₂O₁₁:

Molar mass of C₁₂H₂₂O₁₁ = (12 × 12.01 g/mol) + (22 × 1.01 g/mol) + (11 × 16.00 g/mol) = 342.3 g/mol

Next, we need to calculate the number of moles of C₁₂H₂₂O₁₁ in 15 lbs:

1 lb = 0.4536 kg

15 lbs = 6.804 kg

Number of moles of C₁₂H₂₂O₁₁ = (6.804 kg) / (342.3 g/mol) = 19.88 mol

Finally, we can calculate the number of carbon atoms:

Number of carbon atoms = (12 atoms/mol) × (19.88 mol) = 238.5 ≈ 2.4 × 10^2 carbon atoms

Therefore, the answer is option D) 2.6 x 10^22 C atoms.

Learn more about carbon atoms here:

https://brainly.com/question/21850455

What is the coefficient of oxygen gas after balancing the following equation?___P(s) + ___O2(g) â ___P2O3(s)

Answers

The coefficient of oxygen gas after balancing the equation is 3.

To balance the given equation, we need to find the correct coefficients for the reactants and products involved. The equation is:
___P(s) + ___O2(g) → ___P₂O₃(s)

First, let's balance the phosphorus (P) atoms:
2P(s) + ___O2(g) → 1P₂O₃(s)

Now, let's balance the oxygen (O) atoms:
2P(s) + 3/2O₂(g) → 1P₂O₃(s)

However, having a fraction (3/2) as a coefficient is not ideal, so we can multiply the entire equation by 2 to get whole number coefficients:
4P(s) + 3O₂(g) → 2P₂O₃(s)

Thus, the balanced equation is:
4P(s) + 3O₂(g) → 2P₂O₃(s)

The coefficient of oxygen gas (O₂) in the balanced equation is 3.

Learn more about the coefficients at https://brainly.com/question/29065673

#SPJ11

Calculate the molar mass of (NH4)2SO4A) 114.11 g/mol D) 63.09 g/molB) 228.22 g/mol E) 132.15 g/molC) 118.14 g/mol

Answers

The molar mass of [tex](NH4)2SO4[/tex] is approximately 132.16 g/mol, which corresponds to option E.

To calculate the molar mass of (NH4)2SO4, we need to add up the atomic masses of all the atoms present in one mole of the compound:

[tex](NH4)2SO4 = 2(N) + 8(H) + S + 4(O)= 2(14.01 g/mol) + 8(1.01 g/mol) + 32.06 g/mol + 4(16.00 g/mol)= 28.02 g/mol + 8.08 g/mol + 32.06 g/mol + 64.00 g/mol[/tex]

= 132.16 g/mol. The molar mass of a substance is the mass in grams of one mole of the substance. It is expressed in units of grams per mole (g/mol). The molar mass is calculated by adding up the atomic masses of all the atoms present in the chemical formula of the compound.

Learn more about the molar mass here:

https://brainly.com/question/29202809

#SPJ11

9. The equilibrium constant expression for the reaction 2 BrF5(g) Br2(g) + 5 F2(g) is:
A. Kc = [Br2][F2]/[BrF5] D. Kc = [BrF5]2/[Br2][F2]5
B. Kc = [Br2][F2]5/[BrF5]2 E. Kc = 2[BrF5]2/[Br2]x5[F2]5
C. Kc = [Br2][F2]2/[BrF5]5

Answers

The equilibrium constant expression for the reaction 2 BrF5(g) Br2(g) + 5 F2(g) is  Kc = [BrF5]2/[Br2][F2]5. The correct answer is option D.

This expression shows that the equilibrium constant is equal to the concentration of BrF5 raised to the power of 2, divided by the concentration of Br2 multiplied by the concentration of F2 raised to the power of 5.

The equilibrium constant is a measure of the extent to which the reaction proceeds towards the products at equilibrium, and it is a function of temperature. The larger the equilibrium constant, the more products are present at equilibrium. In this reaction, the concentration of the reactant BrF5 is squared, which means that it has a greater impact on the equilibrium constant than the concentrations of the products Br2 and F2.

Therefore, a decrease in the concentration of BrF5 will cause a decrease in the value of the equilibrium constant, and a shift towards the reactants. Conversely, an increase in the concentration of BrF5 will cause an increase in the value of the equilibrium constant, and a shift towards the products.

Therefore, option  D is correct.

For more such questions on  equilibrium constant, click on:

https://brainly.com/question/19340344

#SPJ11

In the reduction reaction, the hot water and the 95% ethanol act as a solvent pair for the benzil. Which is the better solvent and which is the poorer one?

Answers

In the reduction reaction involving benzil, hot water and 95% ethanol act as a solvent pair. Among the two, ethanol is the better solvent as it can dissolve benzil more efficiently, while hot water serves as the poorer solvent due to its lower solubility for benzil.

In the reduction reaction, the 95% ethanol is the better solvent for benzil as it is able to dissolve more of the compound due to its polar nature. Hot water, on the other hand, is a poorer solvent for benzil as it is less polar and less able to dissolve the compound. However, both solvents are necessary for the reduction reaction as they help to create the necessary conditions for the reduction of benzil to take place.

To know more about relation between solvent and its polar nature

please click:-

https://brainly.com/question/30434187

#SPJ11

PLEASE ANWER!!!! 40 POINTS
7.0 mol AgNo3 reacts with 3.0 mol Zn in a single replacement reaction. 2AgNo3 + Zn --> 2Ag + Zn(no3)2
How many moles of Zn(no3)2 form from 3.0 mol Zn?
mol Zn(NO3)2

Answers

Answer:

n[(ZnNO3)2] = 3.0 mol

Explanation:

The balanced chemical equation for the reaction is:

2AgNO3 + Zn → 2Ag + Zn(NO3)2

From the equation, we can see that 2 moles of AgNO3 react with 1 mole of Zn to produce 1 mole of Zn(NO3)2. Therefore, we can calculate the number of moles of Zn(NO3)2 formed from 7.0 moles of AgNO3 and 3.0 moles of Zn using the mole ratio:

Moles of Zn(NO3)2 = (moles of Zn) × (1 mole of Zn(NO3)2 / 1 mole of Zn)

Moles of Zn = 3.0 mol (given)

Moles of Zn(NO3)2 = 3.0 mol × (1 mol of Zn(NO3)2 / 1 mol of Zn) = 3.0 mol × 1 = 3.0 mol

Therefore, 3.0 moles of Zn(NO3)2 form from 3.0 moles of Zn.

Question 46
The increase of dissolved solids due to evaporation in whirlpools, hot tubs and spas is indicated by
a. increased water temperature
b. condensation
c. cloudy water
d. foamy water

Answers

The increase of dissolved solids due to evaporation in whirlpools, hot tubs and spas is indicated by increased water temperature. The correct answer is option a.

When water evaporates from whirlpools, hot tubs, and spas, the concentration of dissolved solids in the water increases. This happens because the water evaporates, leaving behind the minerals and other substances that were dissolved in it. As a result, the water becomes more concentrated, and the temperature of the remaining water increases as well.

This increase in dissolved solids can lead to several problems, including cloudiness and foaming of the water. Cloudy water occurs when the dissolved solids in the water reach a level where they become visible to the exposed eye. Foaming can occur when the water contains high levels of detergents or other substances that cause suds to form.

To prevent these problems, it is important to monitor the water in whirlpools, hot tubs, and spas regularly and add chemicals as needed to maintain the proper balance of dissolved solids. Regular maintenance and cleaning can also help keep the water clean and clear.

Therefore, option a is correct.

For more such questions on evaporation, click on:

https://brainly.com/question/8944874

#SPJ11

A magnesium ion, Mg2+, hasA) 12 protons and 13 electrons. D) 24 protons and 22 electrons.B) 24 protons and 26 electrons. E) 12 protons and 14 electrons.C) 12 protons and 10 electrons.

Answers

A magnesium ion, Mg2+, has correct answer is option E) 12 protons and 14 electrons.

The correct answer is option E) 12 protons and 14 electrons. This is because the atomic number of magnesium, which is the number of protons in its nucleus, is 12. When it loses two electrons to become an ion, it still has 12 protons but now only 10 electrons. Therefore, the charge on the ion is 2+ (written as Mg2+). Options A, B, C, and D have incorrect numbers of protons and electrons for a magnesium ion.

Mg2+, an ion of magnesium, contains 12 protons and 14 electrons. This is so because magnesium has 12 protons, or its atomic number, in its nucleus. It still has 12 protons but only 10 electrons when it loses two electrons to become an ion. As a result, the ion has a 2+ charge, represented by the symbol Mg2+. For a magnesium ion, the protons and electrons in Options A, B, C, and D are in the wrong proportions.

To know more about magnesium ion click here:

https://brainly.com/question/1698012

#SPJ11

Please answer asap
It's due today

Answers

The correct volume of the solid where the inner cylinder is hollow is:508.2in³

What is volume?

The space occupied within an object's borders in three dimensions is referred to as its volume. It is sometimes referred to as the object's capacity.

What is cylinder?

a cylinder is a three-dimensional solid that holds two parallel bases joined by a curved surface, at a fixed distance. These bases are normally circular in shape (like a circle) and the center of the two bases are joined by a line segment, which is called the axis. The perpendicular distance between the bases is the height, “h” and the distance from the axis to the outer surface is the radius “r” of the cylinder.

according to question,

If we calculate the volume of the outer cylinder, we get:

Volume = π × [tex]r^{2}[/tex] × h = 3.14 × 5^2 × 10 = 785.4 [tex]in^2[/tex]

If we calculate the volume of the inner cylinder, we get:

Volume = π × [tex]r^{2}[/tex] × h = 3.14 × 3^2 × 10 = 282.6 [tex]in^{2}[/tex]

However, the volume of the solid where the inner cylinder is hollow is not the difference between these two volumes. Instead, we need to subtract the volume of the hollow part (the space between the two cylinders), which is the volume of a cylinder with a radius of 3 inches and a height of 10 inches:

Volume = π × r^2 × h = 3.14 × 3^2 × 10 = 282.6 in^3

Therefore, the correct volume of the solid where the inner cylinder is hollow is:

Volume = 785.4 - 282.6 = 502.8 in^3

So, the student's mistake was not taking into account the thickness of the inner cylinder and subtracting the wrong volume.

To know more about volume visit:

https://brainly.com/question/1578538

#SPJ1

Question 20
The first major recorded episode of air pollution that produced human casualties occurred in:
a. Meuse River Valley, Belgium
b. London, England
c. Los Angeles, CA
d. Donora, PA

Answers

The first major recorded episode of air pollution that produced human casualties occurred in the Meuse River Valley, Belgium.

In 1930, a combination of industrial emissions and weather conditions led to a thick smog settling over the valley for several days, resulting in the deaths of at least 60 people and causing illness in thousands more. This event brought attention to the dangers of air pollution and led to the development of air quality regulations and monitoring systems.

the first major recorded episode of air pollution that produced human casualties occurred in Donora, Pennsylvania in 1948. Severe industrial air pollution created a deadly smog that asphyxiated 20 people and made 7,000 more sick.

Find out more about Meuse River Valley

at brainly.com/question/31556531

#SPJ11

When fully opened, which valve will have the highest head loss?
a.) Gate valve
b.) Plug valve
c.) Globe valve
d.) Ball valve

Answers

Answer:

Globe valve

[tex]hope \: it \: helps[/tex]

Why does less evaporation mean higher temperatures in urban areas?

Answers

Less evaporation means that less of the sun's energy is used to convert water into water vapor, and more of it is used to heat up the surface. In urban areas, there is typically less vegetation and more impervious surfaces (such as concrete and asphalt), which reduces the amount of water that can evaporate.

This means that more of the sun's energy is absorbed by the surface, leading to higher temperatures. Additionally, buildings and other structures in urban areas can trap heat and prevent it from dissipating, further contributing to the urban heat island effect.

In rural areas, vegetation and soil moisture play an important role in regulating temperature through a process called evapotranspiration. Evapotranspiration is the combined process of water evaporation from the soil and plant transpiration. It helps to cool the air by removing heat from the surface through the transfer of water from the surface to the atmosphere.

In contrast, urban areas have a significant amount of impervious surfaces like concrete, asphalt, and buildings, which reduce the amount of vegetation and soil moisture. As a result, urban areas have less evapotranspiration, which means less cooling effect from the evaporation of water. This leads to a higher surface temperature in urban areas.

Furthermore, urban areas have a higher proportion of dark-colored surfaces, such as asphalt and concrete, which absorb more solar radiation than lighter-colored surfaces like vegetation and soil. This is known as the "urban heat island effect," which further contributes to higher temperatures in urban areas.

For more question on evaporation click on

https://brainly.com/question/8944874

#SPJ11

You react 2-fluorobutane and 1-bromobutane with sodium iodide in acetone. Which alkyl halide would theoretically yield precipitate in this reaction faster? Provide reason.

Answers

In this reaction, you are reacting 2-fluorobutane and 1-bromobutane with sodium iodide in acetone. The alkyl halide that would theoretically yield precipitate faster in this reaction is 1-bromobutane. The reason for this is due to the difference in reactivity of the halogens involved.


The 2-fluorobutane would theoretically yield a precipitate faster in the reaction with sodium iodide in acetone compared to 1-bromobutane. This is because fluorine (F) is a stronger halogen than bromine (Br) in terms of reactivity in nucleophilic substitution reactions.

In nucleophilic substitution reactions, a halogen atom in an alkyl halide is replaced by a nucleophile. The reactivity of alkyl halides towards nucleophilic substitution reactions depends on the nature of the halogen atom attached to the alkyl group. Fluorine is the most electronegative element among the halogens, and the C-F bond is the strongest and most polarized among the C-X bonds (where X represents a halogen). As a result, alkyl fluorides tend to be more reactive in nucleophilic substitution reactions compared to alkyl chlorides, bromides, or iodides.

In the given reaction, sodium iodide (NaI) is a nucleophile that would replace the halogen atom in the alkyl halide via a nucleophilic substitution reaction. Since fluorine is more reactive than bromine, 2-fluorobutane (which has a fluorine atom) would be expected to undergo the nucleophilic substitution reaction with sodium iodide faster than 1-bromobutane (which has a bromine atom). Therefore, 2-fluorobutane would theoretically yield a precipitate faster in this reaction compared to 1-bromobutane.

To know more about fluorine ,

https://brainly.com/question/1940697

#SPJ11

A total of 1.436 F of electricity (1 F=1 mol e−) was required to electrodeposit all of the Zn and Co from a solution of ZnSO4 and CoSO4. The mixture of Zn and Co that was deposited had a mass of 43.57 g. Calculate the masses of ZnSO4 and CoSO4 present in the original solution.

Answers

There were approximately 128.94 g of ZnSO4 and 109.34 g of CoSO4 present in the original solution.

What is electroplating?

Electroplating is the process of coating a metal object with a thin layer of another metal by means of electrolysis. In an electrolytic cell with a solution of a salt of the metal to be deposited, the item to be plated is made the cathode (negative electrode).

The electroplating of Zn and Co from the solution involves the transfer of electrons from the cathode to the metal ions in the solution, which results in the deposition of the metals on the cathode. The amount of electricity required for this process is proportional to the amount of metal ions present in the solution, which in turn is proportional to the mass of the metals deposited.

Let's first calculate the moles of electrons transferred in the electroplating reaction:

1.436 F × (1 mol e⁻/1 F) = 1.436 mol e⁻

Since the number of electrons transferred is the same for both Zn and Co, the ratio of the moles of Zn and Co deposited should be the same as the ratio of their atomic masses. The atomic masses of Zn and Co are 65.38 g/mol and 58.93 g/mol, respectively, so the ratio of their masses is:

65.38 g/mol ÷ 58.93 g/mol ≈ 1.11

This means that for every 1.11 moles of Zn deposited, 1 mole of Co is deposited.

Let's assume that x moles of ZnSO4 and y moles of CoSO4 were present in the original solution. Then we can set up the following equations based on the balanced electroplating reaction:

2 e⁻ + Zn²+ → Zn (s)

2 e⁻ + Co²+ → Co (s)

The total number of moles of electrons transferred in the electroplating reaction is:

1.436 mol e⁻ = 2 mol e⁻/mol Zn × x mol ZnSO4 + 2 mol e⁻/mol Co × y mol CoSO4

Simplifying and solving for y:

y = (1.436 mol e⁻ - 2 mol e⁻/mol Zn × x mol ZnSO4) / (2 mol e⁻/mol Co)

y = 0.718 mol CoSO4

Since the ratio of the moles of Zn to Co deposited is 1.11, we can calculate the moles of ZnSO4 from the moles of CoSO4:

x = (1.11 mol Zn/mol Co) × (0.718 mol CoSO4) = 0.798 mol ZnSO4

Finally, we can calculate the masses of ZnSO4 and CoSO4:

mass of ZnSO4 = 0.798 mol × 161.47 g/mol = 128.94 g

mass of CoSO4 = 0.718 mol × 152.06 g/mol = 109.34 g

To know more about cathode, visit:

https://brainly.com/question/4052514

#SPJ1

Ammonium sulfate, (NH4)2SO4, is used in fertilizer to supply nitrogen to the soil. What is the total number of atoms in the chemical formula? A) 13 B) 14 C) 15 D) 20

Answers

There are a total of 15 atoms in the chemical formula of ammonium sulfate, (NH4)2SO4. So, the correct answer is C) 15.

To find the total number of atoms in the chemical formula of ammonium sulfate, (NH₄)₂SO₄, we need to count each type of atom present in the formula.

1. There are 2 nitrogen (N) atoms in the two ammonium ions (NH₄).
2. There are 8 hydrogen (H) atoms in the two ammonium ions (2 x 4 = 8).
3. There is 1 sulfur (S) atom in the sulfate ion (SO₄).
4. There are 4 oxygen (O) atoms in the sulfate ion (SO₄).

Now, let's add up the total number of atoms: 2 (N) + 8 (H) + 1 (S) + 4 (O) = 15 atoms

So, C is the correct option.

You can learn more about ammonium sulfate at: brainly.com/question/10834028

#SPJ11

An exothermic reaction causes the surroundings to Group of answer choices become acidic expand. warm up. release CO2. decrease its temperature.

Answers

An exothermic reaction causes the surroundings to warm up.

It is a chemical reaction that releases heat, making the temperature of the surroundings increase. However, it does not necessarily cause the surroundings to become acidic or release CO2. The products of the reaction may vary depending on the reactants involved. Sometimes, an exothermic reaction may cause the substances involved to expand due to the increase in temperature. But again, this depends on the specific reaction and its conditions.

Learn more about exothermic reaction at

brainly.com/question/10373907

#SPJ11

Calculate the number of liters of carbon dioxide measured at STP that could be produced from 6.71 g of propane.

Answers

The number of liters of carbon dioxide measured at STP that could be produced from 6.71 g of propane is 15.5 L.

When propane (C3H8) is burned completely with oxygen (O2), it produces carbon dioxide (CO2) and water vapor (H2O). The balanced chemical equation for the reaction is: C3H8 + 5O2 → 3CO2 + 4H2O
From the balanced equation, we can see that 1 mole reacts with 5 moles of oxygen to produce 3 moles of carbon dioxide. Its molar mass is 44.1 g/mol, so 6.71 g of propane is equivalent to 0.152 moles. Therefore, the amount of carbon dioxide produced would be 0.456 moles (3 moles CO2 per 1 mole C3H8). At STP (standard temperature and pressure), 1 mole of any gas occupies 22.4 L of volume. Therefore, the volume of carbon dioxide produced at STP would be:
V = nRT/P = (0.456 mol) (0.0821 L·atm/mol·K) (273 K) / (1 atm) = 15.5 L
Thus, the number of liters of carbon dioxide measured at STP that could be produced from 6.71 g of propane is 15.5 L.

To learn more about propane, click here:
https://brainly.com/question/25008296

#SPJ11

is this adding of yeast to hydrogen peroxide a physical or chemical change.

Answers

Answer:

Chemical Reaction

Explanation:

A chemical reaction is a process in which substances undergo a chemical change to form a different substance. In this reaction, the hydrogen peroxide is catalyzed by the yeast to release the oxygen molecules.

Please mark as brainlist.

When does an amino acid take on the zwitterion form?

Answers

An amino acid takes on the zwitterion form when it is in a neutral solution, particularly at its isoelectric point.

An amino acid takes on the zwitterion form when it is in a neutral solution, typically at its isoelectric point (pI). A zwitterion is a molecule with both positive and negative charges, but with a net charge of zero. In an amino acid, the carboxyl group [tex](-COOH)[/tex] donates a proton [tex](H^+)[/tex] to the amino group [tex](-NH_2)[/tex] , resulting in a negatively charged carboxylate ion [tex](-COO-)[/tex]  and a positively charged ammonium ion [tex](-NH_3^+)[/tex].

The isoelectric point (pI) is the pH at which an amino acid exists predominantly as a zwitterion. At this pH, the overall charge on the amino acid is zero, and it will not migrate in an electric field. The pI values of amino acids vary, depending on the side chain groups present, which can affect the overall charge of the molecule.

For more such questions on amino acid, click on:

https://brainly.com/question/30265108

#SPJ11

State a general rule about what happens to the pH of acidic or basic solutions when they are diluted with pure water.

Answers

When acidic or basic solutions are diluted with pure water, the pH of the solution will tend to move towards 7 (neutral). In the case of acidic solutions, dilution will result in an increase in pH towards neutrality. This is because the concentration of H+ ions (which contribute to acidit) decreases as more water is added, resulting in a less acidic solution.

Conversely, for basic solutions, dilution will cause the pH to decrease towards 7. This is because as the concentration of OH- ions (which contribute to basicity) decreases, the solution becomes less basic and more neutral. Overall, dilution tends to have a neutralizing effect on the pH of both acidic and basic solutions. When acidic or basic solutions are diluted with pure water, the pH of the solution generally moves closer to neutral (pH 7). For acidic solutions, the pH will increase, while for basic solutions, the pH will decrease. This occurs because the concentration of ions responsible for acidity or basicity is reduced upon dilution.

to know more about neutralizing effect please vist :-

https://brainly.com/app/profile/72583604

#SPJ11

a compound containing lithium and sulfur reacts with a compound containing aluminum and iodine.which best describes the elements present in the products of this reaction?

Answers

The reaction between lithium and sulfur forms lithium sulfide (Li₂S) while the reaction between aluminum and iodine forms aluminum iodide (AlI₃). When the two compounds react, a double replacement reaction occurs resulting in the formation of lithium iodide (LiI) and aluminum sulfide (Al₂S₃).

The products of this reaction are thus lithium, aluminum, sulfur, and iodine. However, since lithium and iodine form a stable ionic compound, LiI, it is not present in its elemental form in the products. Therefore, the products contain aluminum, sulfur, and lithium ions (Li⁺) in the form of aluminum sulfide (Al₂S₃) and lithium iodide (LiI).

In summary, the products of the reaction between a compound containing lithium and sulfur and a compound containing aluminum and iodine are aluminum sulfide and lithium iodide. The elements present in the products are aluminum, sulfur, and lithium ions (Li⁺).

To know more about the double replacement reaction refer here :

https://brainly.com/question/19267538#

#SPJ11

__________ is required to break covalent bonds between atoms.
(double/triple, coordinate covalent bond, energy, bond dissociation energy, resonance structure)

Answers

Bond dissociation energy is required to break covalent bonds between atoms. Bond dissociation energy (BDE) is the energy required to break a covalent bond between two atoms in a molecule.

Here are some additional points about bond dissociation energy:

BDE varies depending on the identity of the atoms involved in the bond and the bonding environment.BDE values can be calculated using computational methods, such as density functional theory.The bond dissociation energy of a molecule can influence its reactivity and stability.Chemical reactions can involve the breaking and forming of bonds with different BDEs, which can affect the overall energy change of the reaction.

This energy is necessary to overcome the attractive forces between the positively charged nuclei and negatively charged electrons. BDE is typically measured in units of kilojoules per mole (kJ/mol).

Learn More About Atoms

https://brainly.com/question/441927

#SPJ11

Question 16
Swimming pool water that is brownish black in color may be due to:
a. H2S
b. Mg
c. Mn
d. Fe

Answers

Swimming pool water that is brownish-black in color may be due to iron (Fe) contamination. option (d)

Iron can enter swimming pool water through a variety of sources, including source water, metal pipes, or iron-containing pool equipment. When the pH level of the pool water is too low, the iron can react with the chlorine to form insoluble iron compounds, resulting in a brownish-black color.

This can be a cosmetic issue, as well as a potential health hazard. To treat the problem, the pH level of the pool water can be raised to prevent the formation of insoluble iron compounds, and a sequestrant can be added to help keep the iron in the solution.

Learn more about the potential health hazard

https://brainly.com/question/6856980

#SPJ4

110. Hydrogen chloride gas can be prepared by the following reaction:2NaCl(s) + H2SO4(aq) ® 2HCl(g) + Na2SO4(s)How many grams of HCl can be prepared from 2.00 mol H2SO4 and 2.56 mol NaCl?A) 7.30 g B) 93.3 g C) 146 g D) 150 g E) 196 g

Answers

Option C is Correct. 146 g  Hydrogen chloride gas can be prepared. Chemistry's use of relationships between products and/or reactants in a specific chemical process to obtain desired quantitative data is known as stoichiometry.

To solve this problem, we need to use stoichiometry and convert the given amounts of H2SO4 and NaCl to the amount of HCl that can be produced.
First, let's write the balanced chemical equation:
2NaCl(s) + H₂SO₄(aq) ⇒ 2HCl(g) + Na₂SO₄(s)
According to the equation, 2 moles of NaCl reacts with 1 mole of H2SO4 to produce 2 moles of HCl. Therefore, we can use the following ratios:
2 mol NaCl : 1 mol H₂SO₄ : 2 mol HCl
Now we can use these ratios to calculate the amount of HCl produced:
2.56 mol NaCl × (1 mol H₂SO₄ / 2 mol NaCl) × (2 mol HCl / 1 mol H₂SO₄) = 2.56 mol HCl
2.00 mol H₂SO₄ × (2 mol HCl / 1 mol H₂SO₄) = 4.00 mol HCl
The limiting reactant is H₂SO₄, since it produces less HCl than NaCl. Therefore, we need to use the amount of H₂SO₄ to calculate the mass of HCl produced:
4.00 mol HCl × 36.46 g/mol = 146 g
Therefore, 146 g of HCl can be prepared from 2.00 mol H₂SO₄ and 2.56 mol NaCl.

Learn more about stoichiometry here

https://brainly.com/question/30215297

#SPJ11

If 0.274 moles of a substance weighs 62.5 g, what is the molar mass of the substance, inunits of g/mol?A) 2.28 × 102 g/mol D) 2.17 × 102 g/molB) 1.71 × 101 g/mol E) 6.02 x 1023 g/molC) 4.38 × 10-3 g/mol

Answers

If 0.274 moles of a substance weighs 62.5 g, then the molar mass of the substance is 2.28 × 10² g/mol. Hence, option A is correct.

Generally, molecular mass of an element is defined as the sum of the masses of the elements which are present in the molecule. Molecular mass is basically obtained by multiplying the atomic mass of an element with the number of atoms in the molecule and then adding the masses of all the elements in the molecule.

Mass of substance = 62.5 g

Number of moles of substance = 0.274 moles

From the formula,

Number of moles = Given mass / Molar mass

⇒ Molar mass = Given mass / Number of moles

Substituting the values we get,

Molar mass = 62.5 g / 0.274 g =  2.28 × 10² g/mol

Hence, option A is correct.

Learn more about molecular masses from the link given below.

https://brainly.com/question/15880821

#SPJ4

From this reaction, ∆G°=-RTlnK we can conclude:If ∆G° <0 then K ___ 1 (<,>,=)If ∆G° = 0 then K ___ 1 (<,>,=)If ∆G° > 0 then K ___ 1 (<,>,=)

Answers

From the reaction, ∆G° = -RT ln K, we can conclude the following:

1)If ∆G° < 0, then K > 1. This means that the reaction is spontaneous and favors the formation of products over reactants at standard conditions.

2)If ∆G° = 0, then K = 1. This means that the reaction is at equilibrium, and the concentrations of products and reactants are equal at standard conditions.

3)If ∆G° > 0, then K < 1. This means that the reaction is non-spontaneous and favors the formation of reactants over products at standard conditions.

4)In summary, the sign of ∆G° determines whether a reaction is spontaneous or non-spontaneous, while the value of K indicates the extent to which the reaction favors either the products or the reactants.

Learn more about equilibrium here:

https://brainly.com/question/30807709

#SPJ11

In order to determine if two atoms are copper (CU) atoms, what must be the same for each?



the number of valence electrons

the number of protons

the charge of the atom

the size of the atom

Answers

In order to determine if two atoms are copper (Cu) atoms, the number of protons will be same for each. Option B is correct.

Copper atoms are an individual particles which make up the element copper (Cu) which is a metal having an atomic number 29 in the periodic table. Each copper atom has 29 protons in its nucleus and an equal number of electrons orbiting around the nucleus in various shells or energy levels.

Copper is known for its thermal conductivity, corrosion resistance, and attractive reddish-orange color. Copper atoms will bond together with other copper atoms or with other elements to form a molecules or compounds with various physical and chemical properties. Copper and its compounds are widely used in electrical wiring, roofing, plumbing, and many other applications.

Hence, B. is the correct option.

To know more about Copper atoms here

https://brainly.com/question/11151224

#SPJ4

--The given question is incomplete, the complete question is

"In order to determine if two atoms are copper (CU) atoms, what must be the same for each? A) the number of valence electrons B) the number of protons C) the charge of the atom D) the size of the atom."--

What is the Effects of H bonding on BP and VP

Answers

The effects of hydrogen bonding on boiling point (BP) and vapor pressure (VP) are as follows:

1. Boiling point: Hydrogen bonding increases the boiling point of a compound.

2. Vapor pressure: Hydrogen bonding decreases the vapor pressure of a compound.

1. This is because hydrogen bonds are strong intermolecular forces that require a lot of energy to break. As a result, it takes more energy to convert a hydrogen-bonded molecule from a liquid to a gas, which leads to a higher boiling point.

2. This is because hydrogen bonds restrict the motion of molecules in the liquid phase and make it harder for them to escape into the gas phase. As a result, a hydrogen-bonded liquid has a lower vapor pressure than a non-hydrogen-bonded liquid at the same temperature.

Hydrogen bonding is a type of intermolecular force that occurs when a hydrogen atom is covalently bonded to an electronegative atom (such as nitrogen, oxygen, or fluorine) and interacts with another electronegative atom in a nearby molecule.

In summary, hydrogen bonding has a significant impact on the physical properties of a compound, including its boiling point and vapor pressure.

For more question on Hydrogen bonding click on

https://brainly.com/question/24317372

#SPJ11

Question 91
Dairy equipment can be disinfected with a chlorine solution of a. 20 mg/l
b. 2 mg/l
c. 200 mg/l
d. 220 mg/l

Answers

The answer is c. Dairy equipment can be disinfected with a chlorine solution of 200 mg/l. This is the recommended concentration for effective disinfection of dairy equipment to prevent the growth of harmful bacteria.

It is important to properly clean the equipment before applying the chlorine solution to ensure that it is fully effective in eliminating any potential pathogens. Typically, a chlorine solution is one that contains chlorine, most frequently in the form of sodium hypochlorite or calcium hypochlorite. These solutions are frequently employed as sanitizers and disinfectants in a range of settings, such as water treatment, swimming pool upkeep, and home cleaning. Depending on how it will be used, the solution's chlorine content may change. For instance, although a professional swimming pool sanitizer may include up to 12% calcium hypochlorite, a common domestic bleach solution has only around 5% sodium hypochlorite.

Learn more about chlorine solution here:

https://brainly.com/question/31142500

#SPJ11

Other Questions
What percent of the world's power is generated form renewable sources?a) 10%b) 5%c) 7%d) 3%e) 20% 3. Describe how you would formulate a model to test Purchasing Power Parity using the cointegration test. You must clearly state the model specification, null hypothesis, variable definition, and test statistics. The default equals implementation of class Object determines:a. whether two references refer to the same object in memory.b. whether two references have the same type.c. whether two objects have the same instance variables.d. whether two objects have the same instance variable values. Ok people. In the pdf are 2 questions. I literally just need to know what numbers go in them boxes. I am offering 30 points. Please Help soon. Suppose that, in the long run, a dairy's variable costs are VC=2Q2 (where Q is the number of gallons of milk produced each day), its marginal cost is MC = 4Q and there is an avoidable fixed cost of $5 0 per day. In the long run there is free entry into the market. The long run market supply curve is: Multiple Choice horizontal at $50 per gallon. horizontal at $100 per gallon. vertical at 5 gallons per day. horizontal at $20 per gallon. An economy-wide expectation that a recession is over and that a robust expansion will occur. properties of a thermal radiator include group of answer choices the power radiated is proportional to the temperature raised to the fourth power. hotter objects emit more light for a given area. hotter objects look redder hotter objects look bluer hotter objects emit less light for a given area. the power radiated is inversely proportional to the temperature. The Educational Policy and Accreditation Standards understand the knowledge base of policy practice to include: analyze the foreign and domestic factors that led many americans to feel this uneasiness with life in the 1970s The big surprise about the first planet discovered around another regular star was that ita. was smaller than Mercury or Pluto in our own solar systemb. had a spectrum which indicated it was made of elements we never find on Earthc. was inhabited by intelligent creatures which never had to take astronomy quizzesd. had a mass greater than that of most starse. orbited so close to its star it took only 4 days to go around (340-12) Type UF cable shall not be used where subject to physical damage. When this cable is subject to physical damage, it shall be protected by a suitable method such as a raceway.(True/False) 3. Anika is on the crew to set up rides for the state fair. The crew does most of the setup on the day that the fairarrives at the fairground and then continues to work on finishing the setup for about a week to have the ridesready to go in time for the opening of the fair. The scatter plot shows Anika's setup time on different days andthe linear model for the data.Anika's Setup Times Explain how changes might affect the functioning of the genome (3) Hillard & Maxwell, an advertising agency, allows employees to start and end their day at their preferred times as long as they complete eight hours and are present between 10 a.m. and 2 p.m. since this is when most meetings are scheduled. Hillard & Maxwell offers ________ to its employees. enrichment, a type of fortification, adds back some but not all, of the nutrients lost in processing is called____ What was the problem that led to The Long Beach, California, AIDS Community Demonstration Project ? If an organism is classified in the animal kingdom, then it must PG 76-22 (PMA) is especially good at what? What is the relative minimum of the function?Enter your answer in the box.A grid with x axis increments of two increasing from negative ten to ten and y axis increments of two increasing from negative ten to ten. The grid contains a parabola opening up with a vertex at x equals negative three and y equals negative two. A toy balloon has an internal pressure of 1.05 atm and a volume of 5.0 L. If the temperature where the balloon is released is 250 C, what will happen to the volume when the balloon rises to an altitude where the pressure is 0.65 atm and the temperature is 150 C?