A computer's power supply converts mains AC to low-voltage regulated DC power for the internal components of a computer. You are building a new computer. You are deciding which type of power supply to install. Which of the following definitions BEST describes a valid type of power supply?
- A single-rail power supply provides one rail (PCB trace). This provides the best safety for the computer by providing a single point of shutdown in the event of a short circuit.
- A single-rail power supply provides one rail (PCB trace) used to always provide equal wattage to all devices attached to the power supply.
- A dual-rail power supply provides separate rails (PCB traces) used to balance the power load between multiple circuits, which prevents any one circuit from becoming overloaded.
- A dual-rail power supply provides separate rails (PCB traces) used to provide equal wattage to the devices attached to each rail.

Answers

Answer 1

The correct definition of a dual-rail power supply is: "A dual-rail power supply provides separate rails (PCB traces) used to balance the power load between multiple circuits, which prevents any one circuit from becoming overloaded."

In general, dual-rail power supplies are preferred for computers because they offer better power management and can help prevent short circuits or other issues that can damage the computer's components. However, single-rail power supplies can also be used in some cases, depending on the specific power requirements of the computer's components. A dual-rail power supply is a type of power supply that provides separate rails, or PCB traces, for distributing power to the components of a computer. These separate rails are used to balance the power load between multiple circuits, which can help prevent any one circuit from becoming overloaded.

Learn more about power supply, here https://brainly.com/question/28875612

#SPJ4


Related Questions

9. Lael wants to determine several totals and averages for active students. In cell Q8, enter a formula using the COUNTIF function and structured references to count the number of students who have been elected to offices in student organizations.

Answers

Let understand that a spreadsheet perform function such as getting the sum, subtraction, averages, counting of numbers on the sheet rows and columns.

Also, the image to the question have been attached as picture.

Here, Lael wants to count the number of students who have been elected to offices in student organizations.

Lael will used the COUNTIF Function in the Spreadsheet to achieve the count because function helps to count cells that contain numbers.

In conclusion, the formulae that Lael should use on the Spreadsheet to count the number of students who are elected is "Q8 = COUNTIF(M2:M31, "Elected")"

Learn more about Excel function here

brainly.com/question/24826456/

What is the creative strategy for music application.​

Answers

Answer:

The City of Vancouver has allocated $300,000 to support the growth and development of the Vancouver Music Strategy, developed to address current gaps in the music ecosystem that support: Creating a sustainable, resilient, and vibrant music industry.

Explanation:

Earl develops a virus tester which is very good. It detects and repairs all known viruses. He makes the software and its source code available on the web for free and he also publishes an article on it. Jake reads the article and downloads a copy. He figures out how it works, downloads the source code and makes several changes to enhance it. After this, Jake sends Earl a copy of the modified software together with an explanation. Jake then puts a copy on the web, explains what he has done and gives appropriate credit to Earl.
Discuss whether or not you think Earl or Jake has done anything wrong?

Answers

Answer:

They have done nothing wrong because Jake clearly gives credit to Earl for the work that he did

Explanation:

Earl and Jake have nothing done anything wrong because Jake give the proper credit to Earl.

What is a virus tester?

A virus tester is a software that scan virus on computer, if any site try to attack any computer system, the software detect it and stop it and save the computer form virus attack.

Thus, Earl and Jake have nothing done anything wrong because Jake give the proper credit to Earl.

Learn more about virus tester

https://brainly.com/question/26108146

#SPJ2

Write a SELECT statement that displays each product purchased, the category of the product, the number of each product purchased, the maximum discount of each product, and the total price from all orders of the item for each product purchased. Include a final row that gives the same information over all products (a single row that provides cumulative information from all your rows). For the Maximum Discount and Order Total columns, round the values so that they only have two decimal spaces. Your result

Answers

Answer:

y6ou dont have mind

Explanation:

Complete the problem about Olivia, the social worker, in this problem set. Then determine the telecommunications tool that would best meet Olivia's needs.


PDA

VoIP

facsimile

Internet

Answers

Answer:

PDA is the correct answer to the following answer.

Explanation:

PDA refers for Programmable Digital Assistant, which is a portable organizer that stores contact data, manages calendars, communicates via e-mail, and manages documents and spreadsheets, typically in conjunction with the user's personal computer. Olivia needs a PDA in order to communicate more effectively.

Write a line of code that declares a variable called shipName and set it equal to the string SpaceX3000.

Answers

Answer:

shipName = "SpaceX3000"

Explanation:

Which of the following techniques is a direct benefit of using Design Patterns? Please choose all that apply Design patterns help you write code faster by providing a clear idea of how to implement the design. Design patterns encourage more readible and maintainable code by following well-understood solutions. Design patterns provide a common language / vocabulary for programmers. Solutions using design patterns are easier to test

Answers

Answer:

Design patterns help you write code faster by providing a clear idea of how to implement the design

Explanation:

Design patterns help you write code faster by providing a clear idea of how to implement the design. These are basically patterns that have already be implemented by millions of dev teams all over the world and have been tested as efficient solutions to problems that tend to appear often. Using these allows you to simply focus on writing the code instead of having to spend time thinking about the problem and develop a solution. Instead, you simply follow the already developed design pattern and write the code to solve that problem that the design solves.

examples of pop in computer​

Answers

Answer:

Short for Post Office Protocol, POP or POP mail is one of the most commonly used protocols used to receive e-mail on many e-mail clients. There are two different versions of POP: POP2 and POP3. POP2was an early standard of POP that was only capable of receiving e-mail and required SMTP to send e-mail. POP3 is the latest standard and can send and receive e-mail only using POP, but can also be used to receive e-mail and then use SMTP to send e-mail.

Suppose you have the following search space:

State
next
cost

A
B
4

A
C
1

B
D
3

B
E
8

C
C
0

C
D
2

C
F
6

D
C
2

D
E
4

E
G
2

F
G
8

Draw the state space of this problem.

Assume that the initial state is A and the goal state is G. Show how each of the following search strategies would create a search tree to find a path from the initial state to the goal state:
Breadth-first search
Depth-first search
Uniform cost search

Answers

Breadth

Depth

Uniform

U

What is the command to launch each of the following tools? Local Group Policy Local Security Policy Computer Management console Local Users and Groups console Resultant Set of Policy (RSoP)

Answers

Answer:

The command for

Local Group Policy  is GPedit.msc

Local Security Policy is SecPol.msc

Computer Management console is Compmgmt.msc

Local Users and Groups console is Lusrmgr.msc

Resultant Set of Policy is RSOP.msc

Explanation:

The command for

Local Group Policy  is GPedit.msc

Local Security Policy is SecPol.msc

Computer Management console is Compmgmt.msc

Local Users and Groups console is Lusrmgr.msc

Resultant Set of Policy is RSOP.msc

To add musical notes or change the volume of sound, use blocks from.

i. Control ii. Sound iii. Pen​

Answers

Sorry but what’s the question?
ii-i-iii I got you.

A medium-sized highway construction company CST has chosen to constrain its investment in computing resources to laptop and desktop computers and the necessary networking hardware and software to access the Internet efficiently. All of CST's data is to be stored off-site through an Internet-enabled storage provider that is used by many different companies and organizations. The service model employed for the data storage capability of only CST is:

Answers

Answer:

The service model employed for the data storage capability of only CST is:

SaaS (Software as a Service).

Explanation:

The three cloud computing categories are Infrastructure as a Service (IaaS), Software as a Service (SaaS), and Platform as a Service (PaaS).  The three cloud computing services provide different virtual computing resources.  In the case of CST, it utilizes only the data storage software of a provider, who provides the data storage infrastructure, including cloud-based servers, while CST uses its own "laptop and desktop computers and other networking hardware and software to access the Internet efficiently."

Information Technology​

Answers

Answer:

information technologies

Explanation:

Information technology is the study, design, development, implementation, support or management of computer-based information systems—particularly software applications and computer hardware. IT workers help ensure that computers work well for people.

Nearly every company, from a software design firm, to the biggest manufacturer, to the smallest “mom & pop” store, needs information technology workers to keep their businesses running smoothly, according to industry experts.

Most information technology jobs fall into four broad categories: computer scientists, computer engineers, systems analysts and computer programmers. HR managers responsible for recruiting IT employees increasingly must become familiar with the function and titles of the myriad job titles in demand today.

Some of them are listed below:

Database administration associate

Information systems operator/analyst

Interactive digital media specialist

Network specialist

Programmer/analyst

Software engineer

Technical support representative

Answer:

Information technology is the use of computers to store, retrieve, transmit and manipulate data, or information, often in the context of business or other enterpise

Think of an aspect of HTML that you found challenging to master. Why is that aspect of HTML important? What are some future situations that you could use it in?

Answers

Answer:

html is a thing that u can to create an website business that u can make money on it

Which of the following describes a codec? Choose all that apply.
a computer program that saves a digital audio file as a specific audio file format
short for coder-decoder
converts audio files, but does not compress them

Answers

Answer:

A, B

Explanation:

Before hard disk drives were available, computer information was stored on:

Floppy Disks

Cassette Tapes

Punch Cards

All of the Above

Answers

floppy disks . is the answer

When analyzing data sets, such as data for human heights or for human weights, a common step is to adjust the data. This adjustment can be done by normalizing to values between 0 and 1, or throwing away outliers.
For this program, adjust the values by dividing all values by the largest value. The input begins with an integer indicating the number of floating-point values that follow.
Output each floating-point value with two digits after the decimal point, which can be achieved as follows:
print('{:.2f}'.format(your_value))
Ex: If the input is:
5 30.0 50.0 10.0 100.0 65.0
the output is:
0.30 0.50 0.10 1.00 0.65
The 5 indicates that there are five floating-point values in the list, namely 30.0, 50.0, 10.0, 100.0, and 65.0. 100.0 is the largest value in the list, so each value is divided by 100.0.
For coding simplicity, follow every output value by a space, including the last one
1 #include
2 #include
3 #include
4 using namespace std;
5
6 int main() {
7
8 /* Type your code here. */
9
10 return 0;
11 }
12

Answers

Answer:

5.23 LAB: Adjust values in a list by normalizing When analyzing data sets, such as data for human heights or for human weights, a common step is to adjust the data. This can be done by normalizing to values between 0 and 1, or throwing away outliers.

Explanation:

Explain the paging concept and main disadvantages of pipelined
approaches? Compare the superscalar and super pipelined approaches
with block diagram?

Answers

Answer:

PAGINACIÓN En la gestión de memoria con intercambio, cuando ... Debido a que es posible separar los módulos, se hace más fácil la modificación de los mismos. ... Ventajas y Desventajas de la segmentación paginada

Explanation:

Animation timing is does not affect the
speed of the presentation
Select one:
True
False​

Answers

Answer:

True

Explanation:

I think it's true.....

In java I need help on this specific code for this lab.


Problem 1:


Create a Class named Array2D with two instance methods:


public double[] rowAvg(int[][] array)


This method will receive a 2D array of integers, and will return a 1D array of doubles containing the average per row of the 2D array argument.


The method will adjust automatically to different sizes of rectangular 2D arrays.


Example: Using the following array for testing:


int [][] testArray =

{

{ 1, 2, 3, 4, 6},

{ 6, 7, 8, 9, 11},

{11, 12, 13, 14, 16}

};

must yield the following results:


Averages per row 1 : 3.20

Averages per row 2 : 8.20

Averages per row 3 : 13.20

While using this other array:


double[][] testArray =

{

{1, 2},

{4, 5},

{7, 8},

{3, 4}

};


must yield the following results:


Averages per row 1 : 1.50

Averages per row 2 : 4.50

Averages per row 3 : 7.50

Averages per row 4 : 3.50

public double[] colAvg(int[][] array)


This method will receive a 2D array of integers, and will return a 1D array of doubles containing the average per column of the 2D array argument.


The method will adjust automatically to different sizes of rectangular 2D arrays.


Example: Using the following array for testing:


int [][] testArray =

{

{ 1, 2, 3, 4, 6},

{ 6, 7, 8, 9, 11},

{11, 12, 13, 14, 16}

};

must yield the following results:


Averages per column 1: 6.00

Averages per column 2: 7.00

Averages per column 3: 8.00

Averages per column 4: 9.00

Averages per column 5: 11.00

While using this other array:


double[][] testArray =

{

{1, 2},

{4, 5},

{7, 8},

{3, 4}

};


must yield the following results:


Averages per column 1: 3.75

Averages per column 2: 4.75



My code is:


public class ArrayDemo2dd

{


public static void main(String[] args)

{

int [][] testArray1 =

{

{1, 2, 3, 4, 6},

{6, 7, 8, 9, 11},

{11, 12, 13, 14, 16}

};

int[][] testArray2 =

{

{1, 2 },

{4, 5},

{7, 8},

{3,4}

};


// The outer loop drives through the array row by row

// testArray1.length has the number of rows or the array

for (int row =0; row < testArray1.length; row++)

{

double sum =0;

// The inner loop uses the same row, then traverses all the columns of that row.

// testArray1[row].length has the number of columns of each row.

for(int col =0 ; col < testArray1[row].length; col++)

{

// An accumulator adds all the elements of each row

sum = sum + testArray1[row][col];

}

//The average per row is calculated dividing the total by the number of columns

System.out.println(sum/testArray1[row].length);

}

} // end of main()


}// end of class


However, it says there's an error... I'm not sure how to exactly do this type of code... So from my understanding do we convert it?

Answers

Answer:

Explanation:

The following code is written in Java and creates the two methods as requested each returning the desired double[] array with the averages. Both have been tested as seen in the example below and output the correct output as per the example in the question. they simply need to be added to whatever code you want.

public static double[] rowAvg(int[][] array) {

       double result[] = new double[array.length];

     for (int x = 0; x < array.length; x++) {

         double average = 0;

         for (int y = 0; y < array[x].length; y++) {

             average += array[x][y];

         }

         average = average / array[x].length;

         result[x] = average;

     }

     return result;

   }

   public static double[] colAvg(int[][] array) {

       double result[] = new double[array[0].length];

       for (int x = 0; x < array[x].length; x++) {

           double average = 0;

           for (int y = 0; y < array.length; y++) {

               average += array[y][x];

           }

           average = average / array.length;

           result[x] = average;

       }

 

       return result;

   }

he is trying to find information on the internet first he navigated to a search engine entered the keywords database administrator and clicked on search the results did not show what it was looking for​

Answers

Answer:

b

Explanation:

b

(Hours, minutes, and seconds) Write a method that returns a string in the form of hour:minute:second for a given total seconds using the following header:
public static String format(long seconds)
Here is a sample run:

Enter total seconds: 342324
The hours, minutes, and seconds for total seconds 342324 is 23:05:24

Note that a zero is padded to hour, minute, and second if any of these values is a single digit.

Answers

Answer:

Answered below.

Explanation:

class Convert {

public static String format(long seconds) {

Scanner sc = new Scanner(System.in);

System.out.print("Enter total seconds: ");

int secs = sc.nextInt();

int hours = secs / 3600;

int minutes = (secs % 3600) / 60;

int seconds = (secs % 3600) % 60;

String timeFormat = hours + ":" + minutes + ":" + seconds;

return timeFormat;

}

}

An example of a host-based intrusion detection tool is the tripwire program. This is a file integrity checking tool that scans files and directories on the system on a regular basis and notifies the administrator of any changes. It uses a protected database of cryptographic checksums for each file checked and compares this value with that recomputed on each file as it is scanned. It must be configured with a list of files and directories to check and what changes, if any, are permissible to each. It can allow, for example, log files to have new entries appended, but not for existing entries to be changed. What are the advantages and disadvantages of using such a tool? Consider the problem of determining which files should only change rarely, which files may change more often and how, and which change frequently and hence cannot be checked. Hence consider the amount of work in both the configuration of the program and on the system administrator monitoring the responses generated.

Answers

Answer:

The main problem with such a tool would be resource usage

Explanation:

The main problem with such a tool would be resource usage. Such a tool would need a large amount of CPU power in order to check all of the files on the system thoroughly and at a fast enough speed to finish the process before the next cycle starts. Such a program would also have to allocate a large amount of hard drive space since it would need to temporarily save the original versions of these files in order to compare the current file to the original version and determine whether it changed or not. Depending the amount of files in the system the work on configuring the program may be very extensive since each individual file needs to be analyzed to determine whether or not they need to be verified by the program or not. Monitoring responses may not be so time consuming since the program should only warn about changes that have occurred which may be only 10% of the files on a daily basis or less.

Suppose you are choosing between the following three algorithms:
• Algorithm A solves problems by dividing them into five subproblems of half the size, recursively solving each subproblem, and then combining the solutions in linear time.
• Algorithm B solves problems of size n by recursively solving two subproblems of size n − 1 and then combining the solutions in constant time.
• Algorithm C solves problems of size n by dividing them into nine sub-problems of size n=3, recursively solving each sub-problem, and then combining the solutions in O(n2) time.
What are the running times of each of these algorithms (in big-O notation), and which would you choose?

Answers

Answer:

Algorithm C is chosen

Explanation:

For Algorithm A

T(n) = 5 * T ( n/2 ) + 0(n)

where : a = 5 , b = 2 , ∝ = 1

attached below is the remaining part of the solution

Read the 4 entities below and assume that customer_id is the key common to all tables.
Customer: An entity that describes a customer. An instance occurs for unique customers only using name, date of birth, and login name as customer_id primary key.
Online: An entity that describes a customer purchasing activity online. An instance occurs when the customer completes the transaction. Customers can purchase more than once.
Visits: An entity that describes a customer purchase in a physical store. An instance occurs if a customer makes or purchase or checks-in using an app. Customers can visit more than once per day.
Satisfaction: An entity that represents data from a recent customer satisfaction survey. An instance occurs when a customer takes the Survey. A customer is tracked by login name and can only take the survey one time.
Use the information to match the following relationships. Answers can be reused more than once.
1. The relationship between Customer and Online.
2. The relationship between Customer and Satisfaction.
3. The relationship between Online and Visits.
4. The relationship between Visits and Satisfaction
A. prototype
B. one-to-one
C. Zero-sum
D. one-to-many
E. TOO many
F. many-to-many

Answers

Answer:

1. The relationship between Customer and Online - One to One

2. The relationship between Customer and Satisfaction - Many to Many

3. The relationship between Online and Visits - Zero sum

4. The relationship between Visits and Satisfaction - Prototype

Explanation:

The relationship between customers and satisfaction is important for any business. One disappointed customer will make a business to loose 10 new customers. The customer satisfaction is most important for any business and it is necessary to get feedback from customers in order to know whether the business service is adequate to satisfy a customer positively.

How does it relate
to public domain
and fair use?

Answers

Because the corilateion of the hippo

Many individuals and organizations are choosing cloud storage for their important files. Discuss the pros and cons of cloud storage for both personal files and business files. Many individuals and organizations are choosing cloud storage for their important files. Discuss the pros and cons of cloud storage for both personal files and business files. What inputs and outputs are needed to support the storage environment

Answers

Answer:

Pros of cloud storage

Files can be accessed remotely without having to be connected to a company's intranetSecurity and file backups are managed by the cloud storage company, frees up employees time applying updates and other maintenance tasks.Usually billed monthly which allows for a lower initial startup cost

Cons of cloud storage

File security relies upon trust in the cloud storage providerLong term cost could be higher than storing files yourselfRequires an internet connection to access files

the
Wnte
that
Program
will accept three
Values of
sides of a triangle
from
User and determine whether Values
carceles, equal atera or sealen
- Outrast of your
a
are for
an​

Answers

Answer:

try asking the question by sending a picture rather than typing

How was the first computer reprogrammed

Answers

Answer:

the first programs were meticulously written in raw machine code, and everything was built up from there. The idea is called bootstrapping. ... Eventually, someone wrote the first simple assembler in machine code.

Explanation:

What is a foreign key? a security key to a database that stores foreign data a security key to a database located in another country a field in a table that uniquely identifies a record in a relational database a field in a table that links it to other tables in a relational database

Answers

Answer: a field in a table that links it to other tables in a relational database

A - a security key to a database that stores foreign data

Other Questions
What theorem shows ACE = BCD divide the polynomial (x^2 + 3x + 5) by 2x + 1 find the volume of the cone. make sure to round using the figure below complete the proof. Which of the following sequence of reasons may be used to fill the blanks in the two-columns proof above? what makes the Aqueducts different from most Roman architecture Wich measurement is the closest to the area of the triangle in square centimeters???? :( Need It ASAP Who generally discusses insurance information with the patient at a pharmacy?A. PharmacistB. Pharmacy TechnicianC. Store managerD. None of the above I just want you to read this and tell me what you think I wanted to share this with you. Is Jesus the only way to get to God? We did not invent the claim of Jesus being the only way. This is not our claim; it is His. Jesus said, I am the way, and the truth, and the life; no one comes to the Father, but through Me (John 14:6, NASB) and, For unless you believe that I am He, you shall die in your sins (John 8:24, NASB). The apostle Peter echoed these words, Neither is their salvation in any other: for there is no other name under heaven given among men, whereby we must be saved (Acts 4:12, KJV). Paul said, There is one God, and one mediator between God and men, the man Christ Jesus(I Timothy 2:5, KJV). It is therefore the united testimony of the New Testament that no one can know God the Father except through Jesus Christ. The bond between man and nature was broken, with the ground producing thorns and thistles and the animal world no longer being benevolent (Genesis 3:17, 18). Man also became separated from himself, with a feeling of emptiness and incompleteness, something he had not experienced before the fall. However, God promised to make all these things right and gave His word that He would send a Saviour, or Messiah, who would deliver the entire creation from the bondage of sin (Genesis 3:15). The Old Testament kept repeating the theme that someday this person would come into the world and set mankind free. Gods Word did come true. God became a man in the person of Jesus Christ (John 1:14, 29). Jesus eventually died in our place in order that we could enjoy again a right relationship with God. The Bible says, God was in Christ, reconciling the world unto himself and he hath made him to be sin for us, who knew no sin; that we might be made the righteousness of God in him (II Corinthians 5:19, 21, KJV). Jesus has paved the way for you! God has done it all, and our responsibility is to accept that fact. We can do nothing to add to the work of Jesus; it has all been done for us. How do you become a Christian? Believe that you are loved and accepted by God. Admit that you are a sinner. Acknowledge your sins. Its not enough to admit that you have sinned. You must regret those sins and then turn away from them. Repenting is asking God to forgive your sins and turning away from them. Commit your life to Christ. When I was six years old my dad died so, I accepted God as my savior because my mom said that it's better to do life with God. You could say I loved praying and talking to God when I was six, but I didn't really know what it meant. When I was nine years old I started to realize who God was and that I needed Him. A couple of days before my brother died in the hospital, I remember that my siblings and I were over at a friend's house because we needed someone to watch us while our parents were at the hospital, and we had school the next day. I was so tired of crying and worrying about my brother, so I asked God to give me rest and help clear my mind. That next day I slept in, and the daughter of my parent's friend woke me up and said, "It's a snow day", (it was dry the day before) (December). I knew that God was giving me rest and all my school worries went away. When my brother died on December 20th a week before Christmas, I did not get mad at God instead, I thanked Him for the time I had with my brother and knowing that I'll see him soon. I knew that God was a morning with me. Even though God gets to have my brother, He knows that I still have to go through the pain. People blame God for the things that happen to them because they can and because it's someone to blame. God lets things happen for a reason. That reason is to grow other people. I learned that at the age of nine. I would not be the person I am today if that didn't happen. Many people say they don't believe in God, then they say "it's God's fault, why did God do this? I hate him". Why are you blaming Him when you don't believe in him? It's not fair. When someone dies in a person's life we get mad instead of realizing it's a part of life, we live in a fallen world. I remember this story where there was a pastor that was going to die because of cancer and he kept saying that he was going to be healed. Soon he died. His kids were confused and frustrated. They became mad at God. They didn't realize that God did heal him, he is now in heaven and has no pain. Today his kids don't want anything to do with God. I met one of his kids and we are good friends today but, I can never talk about the thing that is most important to me, which is God. God wants you to be a part of His movement, whether you accept Him or not just remember He is in your DNA. If you are an atheist you are saying that life has no creator, that is like saying that a book can create its self there is not an author and there is no planning or thought behind the words or how many pages there are. Ballio's family traveled 2/7 of the distance to his uncles house on Saturday. They traveled 2/5 of the remaining distance on Sunday. What fraction of the total distance to his uncles house was traveled on Sunday? Please help! I will give brainliest to those who answer correctly Word Problem #2On one night, a scientist needs to determine thedistance she is away from the International SpaceStation. At the specific time she is determining this thespace station distance they are both on the same line oflongitude 77' E. Furthermore, she is on a latitude of 29N and the space station is orbiting just above a latitudeof 61.4 N. In short, the central angle between the twois 32.4. If the Earth's radius is 3959 miles and thespace station orbits 205 miles above the surface of theEarth, then how far is the scientist away from the spacestation?205 mi3959 miles324 CEA3959 miles find the value of each variable Given the function f(x) = 5x2 - 3x + 2, what is f(2)? !!!!!Please do step by step when answering!!!!! The table shows a students results from spinning the pointer 30 times. Find the experimental probability that the pointer lands in a section with a number greater than or equal to 3. The earth and the moon have both been hit by asteroids. They've been hit throughout history. There are no craters on the earth's surface. Weather, water, and plants work together to erase craters from the earth's surface. You will know your smart after you answer this :) What order of events took place within days of the attack on Pearl Harbor ? You invest $3,000. You have speculated that you will earn an average of 7% on your initial investment each year. What do you expect the total value to be in ten years? will mark brainliest!what is ethics and why is it so important? How does it affect the manufacturing processes of specific goods