A circus tightrope walker weighing 800 N is standing in the middle of a 15 meter long cable stretched between two posts. The cable was originally horizontal. The lowest point of the cable is now at his feet and is 30 cm below the horizontal. Assume the cable is massless. What is the tension in the cable

Answers

Answer 1

Answer:

T = 10010 N

Explanation:

To solve this problem we must use the translational equilibrium relation, let's set a reference frame

X axis

       Fₓ-Fₓ = 0

       Fₓ = Fₓ

whereby the horizontal components of the tension in the cable cancel

Y Axis  

        [tex]F_{y} + F_{y} - W =0[/tex]

        2[tex]F_{y}[/tex] = W

let's use trigonometry to find the angles

        tan θ = y / x

        θ = tan⁻¹ (0.30 / 0.50 L)

        θ = tan⁻¹ (0.30 / 0.50 15)

        θ = 2.29º

the components of stress are

         F_{y} = T sin θ

we substitute

       2 T sin θ = W

       T = W / 2sin θ

        T = [tex]\frac{ 800}{ 2sin 2.29}[/tex]

        T = 10010 N


Related Questions

Choose all the answers that apply.

Which of the following will cause an increase in the acceleration of an object?

increase force
decrease force
increase mass
decrease mass

Whats the answer!?

Answers

Increase force decrease mass

On the periodic table , the vertical columns that extend down the periodic table are called ?

Answers

Answer:

groups

Explanation:

Answer: Groups

Explanation: They are in the same group! Like the Alkaline Metals are all the group. They all lose an electron. :)

A car has a mass of 1500 kg. If the driver applies the brakes while on a gravel road, the maximum friction force that the tires can provide without skidding is about 7000 N. how long are the skid marks

Answers

Explanation:

Given data:

mass of the car = 1500 kg

maximum friction force = 7000 N

initial velocity v_i = 20 m/s ( it is not given in the question just an assumption)

final velocity v_f = 0 m/s

[tex]\begin{array}{l}

\sum F_{y}=M g-F_{n}=0 \\

\sum F_{x}=-F_{s}=m a_{x} \\

-F_{s}=m a_{x}

\end{array}[/tex]  

[tex]a_{x}=\frac{-F_{s}}{m}=\frac{-7000}{1500}[/tex]

[tex]a_{x}=-4.7 \mathrm{~m} / \mathrm{s}^{2}[/tex]

Now we can find the distance from this formula:

[tex]v_{f x}^{2}=v_{i x}^{2}+2 a_{x}(\Delta x)[/tex]

[tex]0=20^{2}+(2 \times-4.7 \times \Delta x)[/tex]

[tex]20^{2}=9.4 \Delta x[/tex]

[tex]\Delta x=\frac{20^{2}}{9.4}=42.55 \mathrm{~m}[/tex]

So, the shortest distance in which the car can stop safely without kidding

=42.55 m

A 40 kg boy standing on a skateboard throws a 2 kg ball 20 m/s to the left.
a. What is the ball's momentum?
O 10 kg m/s
O 20 kg mis
O 40 kg m/s
O 1 kg m/s

Answers

Answer:

40 kg m/s

Explanation:

Given the following data;

Mass of boy = 40kg

Mass of ball = 2kg

Velocity = 20m/s

To find the momentum;

Momentum can be defined as the multiplication (product) of the mass possessed by an object and its velocity. Momentum is considered to be a vector quantity because it has both magnitude and direction.

Mathematically, momentum is given by the formula;

Momentum =mass * velocity

Substituting into the equation, we have

Momentum = 2 * 20

Momentum = 40 kg m/s

2.19 The drag characteristics of a blimp traveling at 4 m/s are to be studied by experiments in a water tunnel. The prototype is 20 m in diameter and 110 m long. The model is one-twentieth scale. What velocity must the model have for dynamic similarity

Answers

Answer:

[tex]Vm=0.894m/s[/tex]

Explanation:

From the question we are told that

Velocity if travel [tex]v=4m/s[/tex]

Diameter of  prototype [tex]d_1=20m[/tex] and [tex]d_2=110m[/tex]

Scale ratio=[tex]\frac{1}{20}[/tex]

Generally Velocity of of the model using Froud's model is mathematically given as

[tex]Fm=Fp[/tex]

[tex]\frac{Vm}{\sqrt{Lmg}} =\frac{Vp}{\sqrt{Lpg}}[/tex]

[tex]Vm=Vp*\frac{Vp}{\sqrt{Lpg} }[/tex]

[tex]Vm=4*\frac{1}{\sqrt{20}}[/tex]

[tex]Vm=0.894m/s[/tex]

Two point charges, A and B, are separated by a distance of 19.0 cm . The magnitude of the charge on A is twice that of the charge on B. If each charge exerts a force of magnitude 45.0 N on the other, find the magnitudes of the charges.

Answers

Answer:

QA = 19μC

QB = 9.5 μC

Explanation:

The force that each charge exerts on the other must obey Coulomb's Law, as follows:

       [tex]F_{AB} = \frac{k*Q_{A} * Q_{B}}{r_{AB}^{2}} (1)[/tex]

We know that the value of the magnitude of FAB  is 45.0 N, the distance between QA and  QB is 0.19 m, and that QA = 2*QB.Replacing in (1), we can solve for QB, as follows:

      [tex]Q_{B} = \sqrt{\frac{F_{AB}*r_{AB} ^{2}}{2*k} } = \sqrt{\frac{45.0N*(0.19m) ^{2}}{2*9e9N*m2/C2} } = 9.5e-6 C (2)[/tex]

Since QA = 2*QB⇒ QA = 2* 9.5μC = 19.0 μC⇒ QB = 9.5μC

True or False. The larger a waves wavelength, the more energy it carries. (1 Point) True O False O Maybe​

Answers

Explanation:

False, it is oppisite the shorter the wavelength the more energy it carries.

What is a work out time setting? (Gym)

Answers

Answer:

It determines how long you do a certain workout.

A spring has a constant of 100 N/m. What Force does the spring exert on you if you stretch it a distance of 0.5 m?

Answers

Answer:

F = - K x        force is opposed to direction of extension

F = -100 N / m * .5 m = -50 N

It would be impossible to build a microscope that could use visible light to see the molecular structure of a crystal because. It would be impossible to build a microscope that could use visible light to see the molecular structure of a crystal because. lenses cannot be ground with fine enough precision. diffraction limits the resolving power to about the size of the wavelength of the light used. lenses with enough magnification cannot be made. lenses cannot be placed in the correct place with enough precision. More than one of the above is correct.

Answers

Answer:

the correct one is: a diffraction limits the resolving power to approximately the size of the wavelength of the light used

Explanation:

To be able to solve two structures with a light source, the Rayleigh criterion must be met that stable the two structures are solved when the first minimum of diffraction at one point is in the code of the first maximum of the other point

Using this criterion we can find an expression for the first minimization of the diffraction spectrum m = 1

     sin θ tea = λ / a

now the structure of the comatose has a separation of around 1 nm and the wavelength of visible light ranges from 400 to 700 nm, when substituting we find

           sin θ = 400/1 10

           sin θ  = 400

           sin θ  = 700/1

           sin θ  = 700

These values ​​are neither impossible since the sin function is bounded between -1 to 1, so we cannot see the diffraction

When reviewing the different statements, the correct one is: a diffraction limits the resolving power to approximately the size of the wavelength of the light used:

It would be impossible to build a microscope that could use visible light to

see the molecular structure of a crystal because diffraction limits the

resolving power to about the size of the wavelength of the light used.

Diffraction occurs when waves encounter an obstacle which leads to it

bending around it. Visible light when diffracted results in the overlapping of

the patterns thereby formation of images as one instead of in different parts.

This thereby leads to the resolving power being limited to the size of the

wavelength of light used and images won't be able to be identified

separately.

Read more about diffraction here https://brainly.com/question/16749356

One component of a metal sculpture consists of a solid cube with an edge of length 24.5 cm . The alloy used to make the cube has a density of 8050 kg/m3 . Find the cube's mass.

Answers

Answer:

118kg

Explanation:

answered

Given

density of the cube= 8050 kg/m3 .

length of the sizes of the cube=24.5 cm

We can convert the length to cm for unit consistency.

It's length =24.5 cm =0.245m

✓ the length of sizes of the cube is the same, then the volume can be calculated as

Volume= L^3

= (0.245m)^3

=0.01470625 m^3

✓ but we know that

Density = mass/ volume

Then,

Mass= (Volume × density)

= (0.01470625)(8050)

= 118 kg

Hence, the mass of the cube is 118 kg

g Incandescent bulbs generate visible light by heating up a thin metal filament to a very high temperature so that the thermal radiation from the filament becomes visible. One bulb filament has a surface area of 30 mm2 and emits 60 W when operating. If the bulb filament has an emissivity of 0.8, what is the operating temperature of the filament

Answers

Answer:

2577 K

Explanation:

Power radiated , P = σεAT⁴ where σ = Stefan-Boltzmann constant = 5.6704 × 10⁻⁸ W/m²K⁴, ε = emissivity of bulb filament = 0.8, A = surface area of bulb = 30 mm² = 30 × 10⁻⁶ m² and T = operating temperature of filament.

So, T = ⁴√(P/σεA)

Since P = 60 W, we substitute the vales of the variables into T. So,

T = ⁴√(P/σεA)

= ⁴√(60 W/(5.6704 × 10⁻⁸ W/m²K⁴ × 0.8 × 30 × 10⁻⁶ m²)

= ⁴√(60 W/(136.0896 × 10⁻¹⁴ W/K⁴)

= ⁴√(60 W/(13608.96 × 10⁻¹⁶ W/K⁴)

= ⁴√(0.00441 × 10¹⁶K⁴)

= 0.2577 × 10⁴ K

= 2577 K

This cat is A tired B lazy or C Dreaming

Answers

i think it’s all hahaha , but thanks for the points

the answer is obviously c because cats cant have nightmares

A 46.8-g golf ball is driven from the tee with an initial speed of 58.8 m/s and rises to a height of 24.7 m. (a) Neglect air resistance and determine the kinetic energy of the ball at its highest point. (b) What is its speed when it is 8.11 m below its highest point?

Answers

Answer:

a) the kinetic energy of the ball at its highest point is 69.58 J

b) its speed when it is 8.11 m below its highest point is 55.97 m/s

Explanation:

Given that;

mass of golf ball m = 46.8 g = 0.0468 kg

initial speed of the ball v₁ = 58.8 m/s

height h = 24.7 m

acceleration due to gravity = 9.8 m/s²

the kinetic energy of the ball at its highest point = ?

from the conservation of energy;

Kinetic energy at the highest point will be;

K.Ei + P.Ei = KEf + PEf

now the Initial potential energy of the ball P.Ei = 0 J

so

1/2mv² + 0 J = KEf + mgh

K.Ef = 1/2mv² - mgh

we substitute

K.Ef = [1/2 × 0.0468 × (58.8 )²] - [0.0468 × 9.8 × 24.7]

K.Ef  = 80.904 - 11.3284

K.Ef = 69.58 J

Therefore, the kinetic energy of the ball at its highest point is 69.58 J

b) when the ball is 8.11 m below the highest point, speed = ?

so our raw height h' will be ( 24.7 m - 8.11 m) = 16.59 m

so our velocity will be v₂

also using the principle of energy conservation;

K.Ei + P.Ei = KEh + PEh

1/2mv² + 0 J = 1/2mv₂² + mgh'

1/2mv₂² = 1/2mv² - mgh'

multiply through by 2/m

v₂² = v² - 2gh'

v₂ = √( v² - 2gh' )

we substitute

v₂ = √( (58.8)² - 2×9.8×16.59 )

v₂ = √( 3457.44 - 325.164 )  

v₂ = √( 3132.276 )

v₂ = 55.97 m/s

Therefore, its speed when it is 8.11 m below its highest point is 55.97 m/s

Your family is moving, and you are asked
to help move some boxes. One box is so
heavy that you must push it across the
room rather than lift it. What are some
ways you could reduce friction to make
moving the box easier?

Answers

Answer:

Explanation:

I would use a hand truck dollies

It has been argued that power plants should make use of off-peak hours (such as late at night) to generate mechanical energy and store it until it is needed during peak load times, such as the middle of the day. One suggestion has been to store the energy in large flywheels spinning on nearly frictionless ball-bearings. Consider a flywheel made of iron, with a density of 7800 kg/m^3 , in the shape of a uniform disk with a thickness of 11.3 cm.

Required:
a. What would the diameter of such a disk need to be if it is to store an amount of kinetic energy of 14.1 MJ when spinning at an angular velocity of 93.0 rpm about an axis perpendicular to the disk at its center?
b. What would be the centripetal acceleration of a point on its rim when spinning at this rate?

Answers

Answer:

Explanation:

kinetic energy = 14.1 MJ = 14.1 x 10⁶ J

Let radius of flywheel be r .

volume of flywheel = π r² x t where t is thickness

= 3.14 x r² x .113 m³

= .04 r² m³

mass = volume x density

= .04 r² x 7800 = 312.73 r²kg

moment of inertia I = 1 / 2 mass x radius²

= .5 x 312.73 r² x r²

= 156.37 r⁴ kg m²

angular velocity ω = 2π x 93/60

= 9.734 rad /s

kinetic energy = 1/2 Iω² where ω is angular velocity

= .5 x 156.37 r⁴ x 9.734²

= 7408.08 r⁴

Given

7408.08 r⁴ =  14.1 x 10⁶

r⁴ = .19 x 10⁴

r = .66 x 10

= 6.60 m .

Diameter = 13.2 m

b )

centripetal acceleration of a point on its rim = ω² r

= 9.734² x 6.6

= 625.35 m /s²

Name and explain the
various types of friction.

Answers

Answer:

There are four types of friction: static, sliding, rolling, and fluid friction. Static, sliding, and rolling friction occur between solid surfaces. Static friction is strongest, followed by sliding friction, and then rolling friction, which is weakest. Fluid friction occurs in fluids, which are liquids or gases.

Explanation:

You have a two-wheel trailer that you pull behind your ATV. Two children with a combined mass of 92.2 kg hop on board for a ride through the woods and the springs (one for each wheel) each compress by 5.97 cm. When you pull the trailer over a tree root in the trail, it oscillates with a period of 1.14 s. Determine the force constant of the springs in N/m.

Answers

Answer:

 k = 1400.4 N / m

Explanation:

When the springs are oscillating a simple harmonic motion is created where the angular velocity is

          w² = k / m

          w = [tex]\sqrt{ \frac{k}{m} }[/tex]

where angular velocity, frequency and period are related

          w = 2π f = 2π / T

           

we substitute

          2π / T = \sqrt{ \frac{k}{m} }

         T² = 4π² [tex]\frac{m}{k}[/tex]

          k =  π²  [tex]\frac{m}{T^{2} }[/tex]

in this case the period is T = 1.14s, the combined mass of the children is

m = 92.2 kg and the constant of the two springs is

          k = 4π² 92.2 / 1.14²

          k = 2800.8 N / m

to find the constant of each spring let's use the equilibrium condition

          F₁ + F₂ - W = 0

           k x + k x = W

indicate that the compression of the two springs is the same, so we could replace these subtraction by another with an equivalent cosecant

           (k + k) x = W

            2k x = W

            k_eq = 2k

            k = k_eq / 2

            k = 2800.8 / 2

            k = 1400.4 N / m

ts
An electric light bulb mixer is used for 19.2 seconds. In that time, it transfers 1
536 J of energy.
Calculate the power output of the cake mixer.
A
I DONT KNOW​

Answers

And electric light bulb mix it is used for nine. Two seconds in that temperature transfers one 536 J of energy calculate shin is 2+2 is 4-1 that’s three quick maths exclamation is calculate the power work output of the kitchen

A 1.00 kg particle has the xy coordinates (-1.20 m, 0.500 m) and a 4.50 kg particle has the xy coordinates (0.600 m, -0.750 m). Both lie on a horizontal plane. At what (a) x and (b) y coordinates must you place a 4.00 kg particle such that the center of mass of the three-particle system has the coordinates (-0.500 m, -0.700 m)

Answers

Answer:

a) The x coordinate of the third mass is -1.562 meters.

b) The y coordinate of the third mass is -0.944 meters.

Explanation:

The center of mass of a system of particles ([tex]\vec r_{cm}[/tex]), measured in meters, is defined by this weighted average:

[tex]\vec r_{cm} = \frac{\Sigma_{i=1}^{n}\,m_{i}\cdot \vec r_{i}}{\Sigma_{i=1}^{n}\,m_{i}}[/tex] (1)

Where:

[tex]m_{i}[/tex] - Mass of the i-th particle, measured in kilograms.

[tex]\vec r_{i}[/tex] - Location of the i-th particle with respect to origin, measured in meters.

If we know that [tex]\vec r_{cm} = (-0.500\,m,-0.700\,m)[/tex], [tex]m_{1} = 1\,kg[/tex], [tex]\vec r_{1} = (-1.20\,m, 0.500\,m)[/tex], [tex]m_{2} = 4.50\,kg[/tex], [tex]\vec r_{2} = (0.600\,m, -0.750\,m)[/tex] and [tex]m_{3} = 4\,kg[/tex], then the coordinates of the third particle are:

[tex](-0.500\,m, -0.700\,m) = \frac{(1\,kg)\cdot (-1.20\,m,0.500\,m)+(4.50\,kg)\cdot (0.600\,m,-0.750\,m)+(4\,kg)\cdot \vec r_{3}}{1\,kg+4.50\,kg+4\,kg}[/tex]

[tex](-4.75\,kg\cdot m, -6.65\,kg\cdot m) = (-1.20\,kg\cdot m, 0.500\,kg\cdot m) + (2.7\,kg\cdot m, -3.375\,kg\cdot m) +(4\cdot x_{3},4\cdot y_{3})[/tex]

[tex](4\cdot x_{3}, 4\cdot y_{3}) = (-6.25\,kg\cdot m,-3.775\,kg\cdot m)[/tex]

[tex](x_{3},y_{3}) = (-1.562\,m,-0.944\,m)[/tex]

a) The x coordinate of the third mass is -1.562 meters.

b) The y coordinate of the third mass is -0.944 meters.

Energy can be transferred from one place to another through?

Answers

Energy can be transferred from one place to another through light, sound, and heat.

The ball of a ballpoint pen is 0.5 mm in diameter and has an ASTM grain size of 12. How many grains are there in the ball

Answers

Given :

The ball of a ballpoint pen is 0.5 mm in diameter and has an ASTM grain size of 12.

To Find :

How many grains are there in the ball?

Solution :

Volume of ball of the ballpoint is :

[tex]V = \dfrac{4 \pi r^3}{3}\\\\V = \dfrac{4\times 3.14 \times 0.5^3}{3}\ mm^3\\\\V = 0.523\ mm^3[/tex]

Now, grain size of 12 has about 520000 grains/mm³.

Therefore, number of grains are :

[tex]n = 520000\times 0.523\ grains\\\\n = 271960\ grains[/tex]

An unmarked police car traveling a constant 38.6 m/s is passed by a speeder traveling 53.4 m/s. Precisely 2.2 seconds after the speeder passes, the police officer steps on the accelerator; if the police car's acceleration is a constant 1.6 m/s2, how much time passes before the police car overtakes the speeder after the speeder passes (assumed moving at constant speed).

Answers

Answer:

The unmarked police car needs approximately 71.082 seconds to overtake the speeder.

Explanation:

Let suppose that speeder travels at constant velocity, whereas the unmarked police car accelerates at constant rate. In this case, we need to determine the instant when the police car overtakes the speeder. First, we construct a system of equations:

Unmarked police car

[tex]s = s_{o}+v_{o,P}\cdot (t-t') + \frac{1}{2}\cdot a\cdot (t-t')^{2}[/tex] (1)

Speeder

[tex]s = s_{o} + v_{o,S}\cdot t[/tex] (2)

Where:

[tex]s_{o}[/tex] - Initial position, measured in meters.

[tex]s[/tex] - Final position, measured in meters.

[tex]v_{o,P}[/tex], [tex]v_{o,S}[/tex] - Initial velocities of the unmarked police car and the speeder, measured in meters per second.

[tex]a[/tex] - Acceleration of the unmarked police car, measured in meters per square second.

[tex]t[/tex] - Time, measured in seconds.

[tex]t'[/tex] - Initial instant for the unmarked police car, measured in seconds.

By equalizing (1) and (2), we expand and simplify the resulting expression:

[tex]v_{o,P}\cdot (t-t')+\frac{1}{2}\cdot a\cdot (t-t')^{2} = v_{o,S}\cdot t[/tex]

[tex]v_{o,P}\cdot t -v_{o,P}\cdot t' +\frac{1}{2}\cdot a\cdot t^{2}-a\cdot t'\cdot t+\frac{1}{2}\cdot a\cdot t'^{2} = v_{o,S}\cdot t[/tex]

[tex]\frac{1}{2}\cdot a\cdot t^{2}+[(v_{o,P}-v_{o,S})-a\cdot t']\cdot t -\left(v_{o,P}\cdot t'-\frac{1}{2}\cdot a\cdot t'^{2}\right) = 0[/tex]

If we know that [tex]a = 1.6\,\frac{m}{s^{2}}[/tex], [tex]v_{o,P} = 0\,\frac{m}{s}[/tex], [tex]v_{o,S} = 53.4\,\frac{m}{s}[/tex] and [tex]t' = 2.2\,s[/tex], then we solve the resulting second order polynomial:

[tex]0.8\cdot t^{2}-56.92\cdot t +3.872 = 0[/tex] (3)

[tex]t_{1} \approx 71.082\,s[/tex], [tex]t_{2}\approx 0.068[/tex]

Please notice that second root is due to error margin for approximations in coefficients. The required solution is the first root.

The unmarked police car needs approximately 71.082 seconds to overtake the speeder.

A mass m is gently placed on the end of a freely hanging spring. The mass then falls 33 cm before it stops and begins to rise. What is the frequency of the oscillation

Answers

Answer:

Explanation:

The mass falls by .33 m before it begins to rise . At that point loss of potential energy is equal to gain of elastic energy .

1/2 k x² = mgx

.5 x k x .33² = m x 9.8 x .33

k / m = 59.4

frequency of oscillation =  [tex]\frac{1}{2\pi} \times\sqrt{\frac{k}{m} }[/tex]

= [tex]\frac{1}{2\pi} \times\sqrt{59.4}[/tex]

= 1.22 per second .

What type of energy is stored in a battery?
pls give all the possible answer and pls if you can give an explanation

thx I'm really stuck​

Answers

Answer:

Batteries use chemistry, in the form of chemical potential, to store energy, just like many other everyday energy sources. For example, logs store energy in their chemical bonds until burning converts the energy to heat.

Explanation:

Electrical energy I’m leaning about this in class right now and I’m really good at it I have a 100 but if I get it wrong I’m sorry but I think it’s electrical energy it has to be

A constant force FA is applied to an object of mass M, initially at rest. The object moves in the horizontal x-direction, and the force is applied in the same direction. After the force has been applied, the object has a speed of vf. Which mathematical routines can be used to determine the time in which the force is applied to the object of mas

Answers

Answer:

 t = [tex]\frac{ v \ F}{ m}[/tex]

Explanation:

The question is a bit strange, for this exercise we must use the mathematical relationship of Newton's second law to find the acceleration of the body

          F = m a

          a = F / m        (1)

with this acceleration the mathematical relations of kinematics of accelerated motion must be used

          v = v₀ + a t

with the body starting from rest its initial velocity is zero

          v = a t

          t = v / a          (2)

if we substitute the equation 1 in 2

          t = [tex]\frac{ v \ F}{ m}[/tex]

this is the final mathematical expression that allows to find the time based on the data of the problem


A school is creating a small parking lot next to the school. They will need
998,140 grams of rock for the parking lot. How many pounds of rock does
the school need? (1 kg = 2.205 lb)

Answers

Answer:

2200.9lb

Explanation:

This is a conversion problem.

 We have been given that:

            Mass of rock the school needed  = 998140g

 

Unknown:

       Pound of rocks the park needed  = ?

To solve this problem, we have to convert from:

     grams to kilograms and then to pounds

            1000g of the rock will weigh 1kg

  So;       998140g of the rock will weight 998.14kg

Therefore:

               1kg of a substance weighs 2.205lb

           998.14g will weight2.205 x 998.14  = 2200.9lb

greyhound pursues a hare and takes 5 leaps for every 6 leaps of the hare, but
3 leaps of the hound are equal to 5 leaps of the hare. Compare the speed of the
hound and the hare,

need full solution:-​

Answers

[tex]{\large{\bold{\rm{\underline{Given \; that}}}}}[/tex]

★ A grey hound pursues a hare and takes 5 leaps for every 6 leaps of the hare, but 3 leaps of the hound are equal to 5 leaps of the hare.

[tex]{\large{\bold{\rm{\underline{To\; find}}}}}[/tex]

★ The speed of the hound and the hare

[tex]{\large{\bold{\rm{\underline{Solution}}}}}[/tex]

★ The speed of the hound and the hare = 25:18

[tex]{\large{\bold{\rm{\underline{Full \; Solution}}}}}[/tex]

[tex]\dashrightarrow[/tex]  As it's given that a grey hound pursues a hare and takes 5 leaps for every 6 leaps of the hare, but 3 leaps of the hound are equal to 5 leaps of the hare.

 So firstly let us assume a metres as the distance covered by the hare in one leap.

Ok now let's talk about 5 leaps,.! As it's cleared that the hare cover the distance of 5a metres.

 But 3 leaps of the hound are equal to 5 leaps of the hare.

Henceforth, (5/3)a meters is the distance that is covered by the hound.

 Now according to the question,

Hound pursues a hare and takes 5 leaps for every 6 leaps of the hare..! (Same interval)

Now the distance travelled by the hound in it's 5 leaps..!

(5/3)a × 5

25/3a metres

 Now the distance travelled by the hare in it's 6 leaps..!

6a metres

 Now let us compare the speed of the hound and the hare. Let us calculate them in the form of ratio..!

25/3a = 6a

25/3 = 6

25:18

a lamp with flux 1400 lm, has an intensity of

a.) 1400 cd
b.) 100 cd
c.) 1000 cd
d.) 111 cd

Answers

I think it’s c sorry if I’m wrong

If there is "waste" energy, does the Law of Conservation of Energy still apply? please don't type something random if so i'll just report it.​

Answers

Explanation:

Yes, the law of conservation of energy still applies even if there is waste energy.

The waste energy are the transformation products of energy from one form to another.

According to the law of conservation of energy "energy is neither created nor destroyed by transformed from one form to another in a system".

But of then times, energy is lost as heat or sound within a system.

If we take into account these waste energy, we can see that energy is indeed conserved. The sum total of the energy generated and those produced will be the same if we factor in other forms in which the energy has been transformed into.
Other Questions
Which level of organization is pictured? organellecelltissueorgan What is a mutation that stops the production of a protein considered 3 (x + 7) = -12x + 7 = ?x = ?Find out ? fast How would I solve this problem? Present progressive assignment Fill in the Tu, el ella usted, nosotros and ellos ellas ustedes forms with the present progressive...Please conjugate ESTAR with the present participle (in english ends in ing..in Spanish it is either ando or iendo!!!!!!!!!Will give brainliest!!!!!!!! What is the quotient of 1+ 3 Over 4 and 2 over 5 From the following ledger balances, prepare a trial balance for the Whispering Winds Corp. at June 30, 2022. All account balances are normal. Accounts Payable $8,300 Service Revenue $7,300Cash $7,700 Accounts Receivable $4,300Common Stock $22,500 Salaries and Wages Expense $3,500Dividends $2,100 Rent Expense $2,300Equipment $18,200. A species of desert plant produces flowers that only bloom at night. How does this enhance the survival of the species?A. This allows the plants to conserve water and not bloom during the heat of the day.B. This species relies on nocturnal animals like moths for pollination and reproductionC. This species relies on moonlight for photosynthesis.D.This allows flowers to stay closed durng the day when herbivores are more likely to eat them.Od Find the size of angle AED? Can someone please give me an explanation for Interphase and what happens in interphase?I will mark brainliestPlease dont copy and paste please help me with this answer Which pair shows equivalent expressions? Please Help me On vocabulary. What did Federalist 51 Argue? Some young people view celebrities including professional athletes, actors, and musicians as role models. Do you think that celebrities are good role models? Explain why or why not. (2007, EOC) Supports: 1. 2. 3. ThesisStatement: What is cancel culture?this is extremely urgent. help. Which prehistoric culture was the first to use pottery? Pls Help Me With This Math Question :,> Which one of the following is a chemical property?A. A wood block is less dense than waterB. Gold bar is shinyC. Bubbles form when baking soda and vinegar are mixed.D. Water turns from liquid to gas at 1000C.pls help thx what is your favorite song? write a paragraph why.