A chemist measures the enthalpy change ∆H during the reaction COCl2(g)+4NH3(g)--->CO(NH2)2(s)+2NH4Cl(s). Then ∆H = -140 KJ.
Enthalpy ChangeThe amount of heat that gets released or absorbed during a reaction and that takes place under constant pressure is referred to as the enthalpy change. The sign for it is H, which can be read as “∆H.”
Note that only reactions carried out under constant pressure are covered by the phrase “enthalpy change.”
What distinguishes entropy change from enthalpy?The main distinction that comes in between enthalpy and entropy, which exists despite the fact that they are both components of a thermodynamic system, is that the enthalpy is expressed as the total amount of heat content whereas altogether the entropy is the level of disorder.
Simply put, what is enthalpy?The whole internal energy is represented by enthalpy. And volume times pressure. The enthalpy of a system cannot be measured, although enthalpy variations can be observed.
Table 1[tex]CoCl_{2}[/tex] + [tex]4NH_{3}[/tex] →[tex]CO(NH_{2} )_{2} + 2 NH_{4}Cl\\[/tex]
∆H = -559 Kj
Then reverse the above reaction and multiply with 2 as sign of ∆H changes from -ve to +ve
[tex]2CO(NH_{2})_{2} + 4NH_{4}Cl[/tex] → [tex]2COCl_{2} + 8NH_{3}[/tex]
∆H = -559 x 2
= 1118 Kj
Table 2[tex]CoCl_{2}[/tex] + [tex]4NH_{3}[/tex] →[tex]CO(NH_{2} )_{2} + 2 NH_{4}Cl\\[/tex]
∆H = -559 Kj
Reverse the above reaction ∆H changes from -ve to +ve
[tex]CO(NH_{2})_{2} + 2NH_{4}Cl[/tex] → [tex]COCl_{2} + 4NH_{3}[/tex]
∆H = +559 Kj
Table 3[tex]CoCl_{2}[/tex] + [tex]4NH_{3}[/tex] → [tex]CO(NH_{2} )_{2} + 2 NH_{4}Cl\\[/tex]
∆H = -559 Kj
Above equation is divided with 4
[tex]\frac{1}{4}[/tex][tex]CoCl_{2}[/tex] + [tex]NH_{3}[/tex] → [tex]\frac{1}{4}[/tex] [tex]CO(NH_{2} )_{2} + \frac{1}{2} NH_{4}Cl\\[/tex]
∆H = -559/4 KJ
= -139.8 KJ
≈ -140 KJ
To know more about enthalpy change, visit:
https://brainly.com/question/4526346
#SPJ9
Given the following reaction:
2 CH4O + 3 O2 → 2 CO2 + 4 H2O
How many grams of CO2 will be produced if you start with 1.34 g CH4O?
Please use the periodic table and remember to include your units.
What is the formula for osmium decobromide
Answer:
OsBr2.
Explanation:
Osmium decobromide is the same as osmium bromide. This is the result of the reaction between osmium hydroxide (Os(OH)2) and hydrobromic acid (HBr) to form water and a salt (osmium bromide):
[tex]Os(OH)_2+2HBr\rightarrow OsBr_2+2H_2O.[/tex]So, osmium bromide has the formula: OsBr2.
Draw the arrow(s) required to go from the left structure to the right structure.
Answer:
See image below
Explanation:
To convert the left structure to the right structure, one pair of electrons on the oxygen is pushed down onto the carbon-oxygen bond (resulting in a double bond). This results in too many electrons on the top carbon. The electrons from the adjacent double bond are subsequently pushed onto the second carbon.
15. If an airplane is in flight, where is the air pressure lower?
under
above
When an airplane is in flight, the air pressure at the under drops.
What is pressure?Pressure is defined as the force applied perpendicular to an object's surface per unit area over which that force is dispersed. Gauge pressure is the pressure in relation to the surrounding atmosphere. Pressure is expressed using a variety of units.
As air flows over an airplane wing, the form of the wing creates a low pressure over the wing surface. The low pressure creates lift, which allows the plane to fly.
Learn more about pressure here:
https://brainly.com/question/28012687
#SPJ1
when working in a contaminated chemical enviroment,which one of the following devices provides the most protection against vapors or fumes froma chemical ga
Answer: gas mask
Explanation: A gas mask provides optimal protection from vapor and fumes.
Suppose 87.1 mL of a 0.190 M solution of Na2SO4 reacts with 143 mL of a 0.311 M solution of MgCl2 to produce MgSO4 and NaCl as shown in the balanced reaction Na2SO4(aq)+MgCl2(aq)⟶MgSO4(s)+2NaCl(aq)
1. Calculate the mass of MgSO4 that can be produced in the given reaction.
2. Only 0.212 g of MgSO4 are isolated after carrying out the reaction. Calculate the percent yield of MgSO4
a. The mass of MgSO₄ that can be produced in the given reaction is 1.985 grams.
b. The percent yield of MgSO₄ is 10.68%
The complete balanced chemical equation is,
Na₂SO₄(aq)+MgCl₂(aq)⟶MgSO₄(s)+2NaCl(aq)
We know,
Molarity(M) = number of moles(n)/per litres solution.
So,
Number of moles of Na₂SO₄ = Molarity × volume.
Moles of Na₂SO₄ = 0.190×0.0871
Moles of Na₂SO₄ = 0.016549 moles.
Moles of MgCl₂ = 0.311×0.144
Moles of MgCl₂ = 0.044473 moles.
As we can see, moles of Na₂SO₄ are present in less amount,
So Na₂SO₄ will be Limiting reagent and it will control the reaction.
So,
Moles of Na₂SO₄ = Moles of MgSO4
Moles of MgSO₄ = 0.016549 moles.
As we know,
Moles = Mass produced/molar mass
Molar mass of MgSO₄ = 120grams/mole
Putting the values,
0.016549 = mass of Mg produced/120
Mass of MgSO₄ produced = 1.985 grams.
b. Percentage yield formula,
Percentage yield = experimental mass/theoretical mass×100
Theoretical mass = 1.985 grams
Experimental mass = 0.212 grams.
Percentage yield = 0.212/1.985×100
Percentage yield of MgSO₄ = 10.68%
To know more about Molarity, visit,
https://brainly.com/question/26873446
#SPJ1
Question 7 of 8
How many mL HCI of a 0.100 M HCI solution is needed to completely neutralize
25.0 mL of a 0.350 M NaOH solution according to the balanced chemical reaction:
HCl(aq) + NaOH(aq) → H₂O(l) + NaCl(aq)
The volume of HCl is needed to completely neutralize is 81.25 ml.
Formula of neutralization, M₁V₁ = M₂V₂
M₁ = concentration of HCl
V₁ = volume of HCl
M₂ = concentration of NaOH
V₂ = volume of NaOH
Put the value in M₁V₁ = M₂V₂
0.100 × V₁ = 25 × 0.325
V₁ = 25 × 0.325/ 0.100
V₁ = 81.25 ml
Hence, the volume of HCl is 81.25 ml.
In chemistry, neutralization or neutralization is a chemical reaction wherein acid and a base react quantitatively with every other. In a reaction in water, neutralization results in there being no excess of hydrogen or hydroxide ions present inside the answer.
whilst a strong acid reacts with a strong base the ensuing salt is neither acidic nor primary in nature i.e. it's far impartial for instance whilst HCl, a strong acid, reacts with NaOH, a robust base, the resulting salt is sodium chloride and water.
Learn more about neutralization here:- https://brainly.com/question/23008798
#SPJ1
which 5 systems help u change from a child to a adult
The five systems that helps us grow from a child to adult are excretory, integumentary, digestive, respiratory and cardiovascular system.
What are body systems?The body systems are the combination two or more systems located in the body that helps in the maintenance of hemostasis of the body.
Examples of body systems include the following:
Excretory system: This is the system that contains organs that helps in the removal of metabolic wastes from the body.The integumentary system: This is the system that protects the delicate internal organs of the body.The digestive system: This is the system that helps in the breaking down of food substances for body use.The respiratory system: This is the system that helps in the oxygenation of blood.The cardiovascular system: This is the system that helps in the pumping of blood throughout the body.Learn more about body systems here:
https://brainly.com/question/20200187
#SPJ1
If 100. mL of 0.400 M NaOH and 100, mL of 0.400 M HCI both initially at 24.5°C react in a calorimeter, the final temperature of the surrounding solution is 27.2°C. What is the enthalpy change of this chemical reaction (in Joules)? Assume the density of the solutions are the same as water. (be careful with your signs)
The negative sign indicators that the reaction is exothermic. the enthalpy change -2257.2 J.
Describe enthalpy.Enthalpy, one of a thermodynamic system's attributes, is determined by multiplying the system's internal energy by the sum of its pressure and volume. The large surrounding environment conveniently offers this state function, which is commonly utilized in measurements of chemical, biological, and physical systems at constant pressure.
In order to calculate the system's physical dimensions, the pressure-volume term specifies the effort required to displace the system's surrounds and make room for it. The pressure-volume term is quite tiny for solids and liquids under ordinary conditions, but only fairly modest for gases. Enthalpy therefore acts as a substitute for energy in chemical systems.
The equation for the reaction is NaOH + HCl [tex]\rightarrow[/tex] NaCl + H₂O
Volume of the solution (100+100) ml = 200ml
Mass of solution = 200ml soln. x 1.00gm/1ml soln. (water density 1g/ml)
= 200ml
We, know the rule q=mcp∆t can be used to calculate the enthalpy change
Where q = enthalpy change
m = mass of solution
c = Specific heat of solution
∆t = Change in temperature
∴ m = 200gm soln.
c = 4.18J/g°C (water specific heat)
∆t = (27.2°C - 24.5°C)
∴ q=mcp∆t
= 200gm x 4.18J/g°C x (27.2°C - 24.5°C)
= 2257.2 J
We known that
q reaction = - q solution
= (c x m x ∆t) soltuion
∴ q reaction = -2257.2 J
Therefore, the correct answer is -2257.2 J
To learn more about enthalpy
https://brainly.com/question/14047927
#SPJ10
The smooth ER differs from the rough ER in that:
A. The rough ER contains no ribosomes, the smooth ER contains ribosomes.
B. The smooth ER produces carbohydrates and lipids, rough ER produces proteins.
C. The smooth ER produces proteins, rough ER produces lipids.
D. The rough ER is the site of mRNA transcription, smooth ER is the site of protein translation.
The smooth ER differs from the rough ER in that the smooth ER produces carbohydrates and lipids, whereas the rough ER produces proteins. (Option B)
What distinguishes the smooth Endoplasmic reticulum from the rough Endoplasmic reticulum?The manufacture, folding, quality assurance, and shipment of some proteins take place in the rough ER, which is dotted with millions of membrane-bound ribosomes.
The production of steroid hormones, lipid (fat) synthesis, and metabolism are all heavily correlated with SER. It also serves as a detoxifier. The production of proteins is greatly aided by the rough endoplasmic reticulum.
The fundamental distinction between the rough endoplasmic reticulum and the smooth endoplasmic reticulum is that the RER contains ribosomes, which give it its rough appearance and enable protein synthesis.
Ribosomes cover the rough endoplasmic reticulum, which is important in the synthesis and creation of proteins.
To know more about Smooth ER and Rough ER visit:
https://brainly.com/question/13118914
#SPJ9
look at the picture
Answer:
Determining the melting point of a substance.
Silver has a density of 10.49 g/cm³. If 101.0 g of silver is added to 51.0
mL of water in a graduated cylinder, to what volume reading will the
water level in the cylinder rise?
Density is the mass of a substance per unit volume. So, adding 9.628 ml of Ag to 51ml of H2O, makes the total volume 60.628ml.
What is meant by density ?
Density is the mass of a substance per unit volume. The most commonly used symbol for density is ρ, although the Latin letter D can also be used. Mathematically, density is defined as mass divided by volume: [tex]{\displaystyle \rho ={\frac {m}{V}}}[/tex] where ρ is density, m is mass and V is the volume.
Density is an important concept because it allows us to determine which substances float and which sink when placed in a liquid. In general, substances float until their density is lower than the density of the liquid in which they are placed.
Density = Mass/ water displaced
water displaced = Mass/Density
water displaced = 101 / 10.49
water displaced = 9.628 cm³
Here 1 cm³ = 1ml
so, adding 9.628 ml of Ag to 51ml of H2O, makes the total volume 60.628ml.
To learn more about Density, visit;
https://brainly.com/question/952755
#SPJ9
Using an id reader to check ids can make it easier to
Display data associated with the ID such as age and other information.
Glassy unfocused eyes slow speech and movement or difficulty with small motor skills indicate a slow reaction. State ID cards, passports military ID cards, and driver's licenses are acceptable forms of ID in most states. Permanent Resident Cards may be accepted in some areas, but check with your administrator.
When a liquor store has carefully examined the identity of a customer before serving alcoholic beverages and reached a reasonable conclusion. Even if it turns out to be a fake ID and the appearance of the minor suggests the minor may be over the age of 21 or doing things she normally wouldn't. It is legally permissible even if it suggests that it is sexual. This can be a behavioral sign of addiction. Delayed reaction time Your body reacts and acts slower.
Learn more about An ID reader here:-https://brainly.com/question/27089667
#SPJ1
an auto mechanic spills 88mL of 2.6M H2S04 solution from an auto battery. How many milliliters of 1.6M NaHCO3 must be poured on the spill to react competely with the sulfuric acid?
The volume (in mL) of the 1.6 M NaHCO₃ solution that must be poured on the spill to react completely is 286 mL
How to determine the volume of NaHCO₃We'll begin by writing the balanced equation for the reaction. This is given below:
H₂SO₄ + 2NaHCO₃ —> Na₂SO₄ + 2H₂O + 2CO₂
The mole ratio of the acid, H₂SO₄ (nA) = 1The mole ratio of the base, NaHCO₃ (nB) = 2The volume of NaHCO₃ can be obtained as follow:
Volume of acid, H₂SO₄ (Va) = 88 mL Molarity of acid, H₂SO₄ (Ma) = 2.6 MMolarity of base, NaHCO₃ (Mb) = 1.6 MVolume of base, NaHCO₃ (Vb) =?MaVa / MbVb = nA / nB
(2.6 × 88) / (1.6 × Vb) = 1 /2
228.8 / (1.6 × Vb) = 1 / 2
Cross multiply
1.6 × Vb = 228.8 × 2
1.6 × Vb = 457.6
Divide both side by 1.6
Vb = 457.6 / 1.6
Vb = 286 mL
Thus, the volume of the NaHCO₃ solution needed is 286 mL
Learn more about titration:
https://brainly.com/question/19053582
#SPJ1
Write the ions present in a solution of NaC2H3O2.
Balance the given equations by inserting the appropriate coefficients.
chemical equation=p4+O2
The reaction equation that is balanced is obtained as; [tex]P_{4} + 5O_{2} ----- > 2P_{2} O_{5}[/tex]
What is reaction equation?We know that it is common to use a chemicals reaction equation to show what is going on in a reaction system. The chemical reaction equation would include the symbols of the elements that are combined in the reaction equation.
The first rule that must be observed when we are writing a balanced reaction equation is that the number of atoms of each element on the reactant side must be the same as the number of atoms of the same element on the left hand side. This is what we call an atom count. If the atom count is not complete it then follows that the reaction equation is not balanced as written
Having said this let us now attempt to write the balanced reaction equation between phosphorus and oxygen molecules which are both poly atomic.
The balanced reaction equation is; [tex]P_{4} + 5O_{2} ----- > 2P_{2} O_{5}[/tex]
Learn more about reaction equation:https://brainly.com/question/3588292
#SPJ1
A buffer solution with a pH of 4.23 is prepared with the same volumes of 0.90 M HC₂H₂O₂ and .
O 1.2x10-9 M NaC₂H₂O₂. The K₂ of HC₂H₂O₂ is 1.8 - 105.
A buffer solution with a pH of 4.23 is prepared with the same volumes of 0.90 M HC₂H₂O₂ and O 1.2x10-9 M NaC₂H₂O₂ is 0.37.
A buffer answer is an aqueous answer along with an aggregate of a weak acid and its conjugate base, or vice versa. Its pH adjustments little or no when a small amount of sturdy acid or base is introduced to it.
Buffer solution is a water solvent based totally answer which includes a combination containing a vulnerable acid and the conjugate base of the vulnerable acid, or a vulnerable base and the conjugate acid of the vulnerable base. They withstand a trade-in pH upon dilution or upon the addition of small amounts of acid/alkali to them.
Buffer solutions resist an exchange in pH whilst small amounts of a robust acid or a strong base are added. a solution of acetic acid and sodium acetate CH3COOH + CH3COONa is an example of a buffer that includes a susceptible acid and its salt.
Learn more about buffer solution here:-
https://brainly.com/question/2131477
#SPJ1
i need help with chemistry equation
From the given equation of reaction:
The maximum amount of ethane (C₂H₆ ) that can be formed is 9.15 gThe formula of the limiting reagent, hydrogen is H₂.The amount of the excess reagent that remains after the reaction is complete = 3.78 gramsWhat are limiting reagents?Limiting reagents refers to the reactants in a given reaction which is completely used up at the end of a reaction.
Once the limiting reagent is used up, the reaction will stop.
Considering the given question and the data provided:
0.610 grams of hydrogen gas are allowed to react with 12.4 grams of ethylene (C₂H₄).
The equation of the reaction is as follows:
H₂ (g) + C₂H₄ (g) ---> C₂H₆ (g)
The mole ratio of the reactants is used to determine the limiting reactant.
Mole ratio of hydrogen to ethylene is 1 : 1
Moles of hydrogen = 0.610/2 = 0.305 moles
Moles of ethylene = 12.4/28 = 0.44 moles
The limiting reagent is hydrogen while the excess reagent is ethylene.
The maximum amount of ethane (C₂H₆ ) that can be formed is 0.305 moles.
mass of 0.305 moles of ethane = 0.305 * 30 grams
mass of 0.305 moles of ethane = 9.15 g
The moles of the excess reagent that remains after the reaction is complete = 0.44 - 0.305 = 0.135 moles
mass of 0.135 moles of ethylene = 0.135 * 28 = 3.78 grams
Learn more about limiting reagents at: https://brainly.com/question/26905271
#SPJ1
Which statement is correct in the process of balancing the equation?
CH4+O2 = CO2+2H2O
.Do nothing, the equation is already balanced.
Add coefficient 2 to O2 on the left side of the equation.
Remove coefficient 2 in front of H2O on the right side of the equation.
Add coefficient 4 to O2 on the left side of the equation.
Correct statement in the process of balance the equation CH₄+O₂ → CO₂+2H₂O then add coefficient 2 to O₂ on the left side of the equation
Balance reaction is the chemical reaction in which number atom is arranged specific manner which reaction is balanced means all elements in the reaction are balanced with specific number
And the given reaction is
CH₄+O₂ → CO₂+2H₂O then,
Place a coefficient of 2 in front of the O₂ we now have 4O atoms on both sides CH₄+2O₂ → CO₂+2H₂O
Know more about balance
https://brainly.com/question/19181672
#SPJ1
How mamy liters of a 0.500 M sucrose, C12H22O11 solution contain 1.5 kg of sucrose?
Answer:
10.0 g C12H22O11 (mol/342.34 g) (1/0.500 L) = 0.06 M C12H22O11 => 1 sig.
Explanation:
According to molar concentration,0.00876 liter of 0.500 M sucrose contain 1.5 kg of sucrose.
What is molar concentration?Molar concentration is defined as a measure by which concentration of chemical substances present in a solution are determined. It is defined in particular reference to solute concentration in a solution . Most commonly used unit for molar concentration is moles/liter.
The molar concentration depends on change in volume of the solution which is mainly due to thermal expansion. Molar concentration is calculated by the formula, molar concentration=mass/ molar mass ×1/volume of solution in liters.
In terms of moles, it's formula is given as molar concentration= number of moles /volume of solution in liters.
Volume is obtained by using molar concentration formula, 0.500×342.3/1.5×10³=114.1×10[tex]^-3[/tex]=1/V
Thus,volume=1/114.1×10[tex]^-3[/tex]=0.00876 M.
Thus, the volume of sucrose solution is 0.00876 M.
Learn more about molar concentration,here:
https://brainly.com/question/21841645
#SPJ2
8. You are on in-line skates at the top of a small hill. Your potential energy is equal to
The last time you checked, your mass was 60.0 kg.
a. What is the height of the hill?
b. If you start rolling down this hill, your potential energy will be converted to kinetic
energy. At the bottom of the hill, your kinetic energy will be equal to your potential
energy at the top. Calculate your speed at the bottom of the hill.
The hill is 1.7 metres high (Approx.)
Knowing that;
Energy potential = 1000 J
Weight = 60 kg
mgh = potential energy
1,000 = [60][9.8][h]
h = 1.7 m
At the peak of its climb, how much potential energy does the ball still have?The whole amount of energy will be in the form of potential energy since the ball's kinetic energy will be equal to zero. As a result, when the ball reaches the peak of its climb, its potential energy will be 450 J. As a result, the ball will soar as high as 45.91 metres.
An enormous amount of potential or stored energy exists in a rock that is at rest on a hill. The boulder's potential energy transforms into kinetic energy, the energy of motion, when it falls.
The automobile drives faster as it goes down the hill, which results in an increase in kinetic energy and a decrease in potential energy.
Learn more about potential energy refer
https://brainly.com/question/14427111
#SPJ13
Sir Isaac Newton reasoned that the attractive force that keeps planets in their orbits around the Sun is due to two factors, one of which is the distance between the planet and the Sun. Which law was the result of his observations and calculations?
A) The law of Superposition
B) The law of Universal Gravitation
C) The law of Conservation of Mass
D) The law of Conservation of Energy
Answer:
The law of Universal Gravitation.
Complete the balanced neutralization equation for the reaction below. Be
sure to include the proper phases for all species within the reaction.
HCl(aq) + Sr(OH)₂(aq) –
→
2 HCl(aq) + Sr(OH)₂(aq) → SrCl₂(aq) + 2 H₂O(l).
Complete neutralization occurs when strong acids such as hydrochloric acid and HCl are mixed with strong bases such as sodium hydroxide and NaOH. Strong acids and strong bases decompose or completely dissociate into their constituent ions when dissolved in water. When a strong acid reacts with a strong base, the resulting salt is neither acidic nor basic.
Neutral. For example, when HCl hydrochloric acid a strong acid reacts with NaOH a strong base the resulting salts are sodium chloride and water. In a neutralization reaction, an acid reacts with an equimolar amount of base to form salt and water. An example would be the reaction between a strong acid and a base. The sodium chloride formed is the result of the neutralization reaction.
Learn more about Neutralization here:-https://brainly.com/question/23008798
#SPJ1
When subjected to heat and pressure, a chemical sedimentary rock can be changed into which rock type?
Responses
foliated igneous rock
clastic sedimentary,
metamorphic
non-foliated igneous
If you dissolved 54 grams of ammonia in 100 grams of water at 400C would it be considered saturated, unsaturated, or supersaturated? Why?
If you dissolved 54 grams of ammonia in 100 grams of water at 400°C then the solution is saturated
A saturated solution is a solution that has dissolved as much solute as it is capable of dissolving and in a saturated solution no more solute can be dissolved at a given temperature and we can make an saturated solution by keep on dissolving solute until no more solute can be dissolved
Here given data is dissolved 54 grams of ammonia in 100 grams of water at 400°C then the ammonia is totally dissolved in this 100 ml water
NH₃ + H₂O → NH₄OH
So, here ammonium hydroxide are formed which is saturated solution and when ammonia is dissolved in water the water molecule donate the proton to the NH₃ molecule and the solubility of ammonia decreases with the increases in of water solvent that's why when we dissolved 54 grams of ammonia in 100 grams of water at 400°C the solution is saturated
Know more about saturated
https://brainly.com/question/14904802
#SPJ1
Each copper(II) sulfate unit is associated with five water molecules in crystalline copper(II) sulfate pentahydrate
(CuSO4 ⋅ 5H2O). When this compound is heated in air above 100oC, it loses the water molecules and also its blue color:
CuSO4 ⋅ 5H2O → CuSO4 + 5H2O
If 9.60 g of CuSO4 are left after heating 15.01 g of the blue compound, calculate the number of moles of water originally
present in the compound.
Number of moles of water originally present in the compound is 0.060 mol
Mole is the SI unit of amount of substance of a specified elementary entity
Here given reaction is
CuSO₄ ⋅ 5H₂O → CuSO₄ + 5H₂O
And given data is CuSO₄ = 9.60 g
So we have to find number of mole of water originally present in the compound = ?
So number of mole = mass of substance/mass of one mole
Number of mole = 9.60 g/159.6
Number of mole = 0.060 mol
Water originally present in the compound is 0.060 mol
Know more about compound
https://brainly.com/question/14865342
#SPJ1
Which term describes what happens when solutes dissolve in water?
hydrate
particulate
diffuse
dissociate
Dissociate is the term which describes the dissolution of solutes in water.
What is Particle theory?One way to think of dissolving is as a certain kind of mixing. There are various effects that can occur from mixing materials. Sometimes the parts can be readily separated, stay visible, and have little impact on one another. Other times, mixing can cause materials to undergo significant, irreversible modifications. On the spectrum between the two is dissolving. The simplest scenario entails combining two different materials. Dissolving often occurs when a solid and a liquid, usually water, come into contact. Solids (solute) and liquids (solvent) combine very closely to create a mixture known as a solution when they dissolve. Without color, the solid won't be visible, and the solution can just appear to be the initial liquid.To learn more about Particle theory, refer
https://brainly.com/question/23487480
#SPJ13
HW6.3. 221 PS6_1c molal sat balances
Moist air at atmospheric presure, 92 C and relative humidity 44% enters a cooler where it is cooled isobarically at 1 atm to a temperature of 21 C. (Isobaric means at constant pressure)
The Antoine equation with T in C and p in mm Hg has coefficients for water given by
0 to 60 C: A= 8.10765 B=1750.286 C=235.000
60 to 150 C : A=7.96681 B=1668.210 C= 228.000
At the specified temperature 92 C, the Antoine equation gives a vapor pressure p*=567.09 mm Hg, and at a temperature 21 C, the vapor pressure is p*=18.65 mm Hg.
What is the molal saturation of the moist entering air?
What is the molal saturation of the exiting air at 21 C
If the moist entering air contains 33.39 total moles which includes 22.43 moles of dry air; how many g's of water condenses in the cooler?
The molal saturation of the moist entering air is 10.96 mol, molal saturation of the exiting air at 21 C is 0.560 mol and 187.2g of water condenses in the cooler.
Antoine equationThe Antoine equation can be stated as a class of semi-empirical correlations describing the exact relation between vapor pressure and temperature for pure substances.
it is seen that
humidity = 44%
Ptotal = 1 atm = 760 mm Hg
[tex]P_{H2O}[/tex] = RH/100 X [tex]P^{*} _{H2O}[/tex] = 52/100 X 567.09
= 294.88 mmHg
Molal saturation = [tex]\frac{P_{H2O} }{P_{T} -P_{H2O} }[/tex]
= 294.88/ (760 - 294.88)
= 0.6361
Exit air = 100% (after cooling)
[tex]P_{H2O}[/tex] = [tex]P^{*} _{H2O}[/tex] at 21°C = 18.65
Hm2 = 18.67/ (760 - 18.65)
= 0.025
Mole of water that enters = mole of total moist - mole of total dry
= 33.39 - 22.43
= 10.96
mole of water exits after cooling
n2 = Hm2 x (mole of dry air)
= 0.025 x 22.43
= 0.560
water condenses = n1 - n2
=10.96 - 0.560
=10.4 mol
=10.4 x 18 g
= 187.2 g
To know more about molality, visit:
https://brainly.com/question/14823885
#SPJ9
When 25.0 mL of 0.500 M AgNO, solution is mixed with 40.0 mL of 0.250 M Na SO4, solid Ag-SO4 precipitates out. What
mass of AgSO4 is formed?
(The molar mass of Ag:SO, is 311.8 g/mol.)
Answer:
Explanation:
yyyyyyyyyyyy
14) Identify which types of acid-base reactions are reversible and which ones are
irreversible.
Acid-base reactions are reversible and which ones are irreversible then the 1st reaction is HA + H₂O ↔ A⁻ + H₃O⁺ is the reversible reaction and in the 2nd reaction MOH → M⁺ + OH⁻ is the reversible reaction and 3rd reaction is HA+H₂O → A⁻ + H₃O⁺ is the irreversible reaction
Acid base reaction is the chemical reaction that occur when acid and base are mixed together called acid base reaction and irreversible reaction means they can occur only in one direction the reactants can change to the products but the products cannot change back to the reactants and reversible reaction means chemical reaction occur in both direction the reactants can change to the products and the products can also change back to the reactants and in that given reactions
1st reaction is HA + H₂O ↔ A⁻ + H₃O⁺ is the reversible reaction because it goes in the both direction called as reversible reaction2nd reaction MOH → M⁺ + OH⁻ is the reversible reaction because in that reaction product can also back to the reactant called as reversible reaction 3rd reaction is HA+H₂O → A⁻ + H₃O⁺ is the irreversible reaction because in that reaction acid are treated with water that's why it is called irreversible reactionKnow more about reversible irreversible
https://brainly.com/question/13747461
#SPJ1