a chemical ____ is a process in which some substances change chemically into different substances

 The correctly identified subatomic particle with its charge is  

The British physicist James Chadwick made the neutron discovery in 1932.

Neutrons are neutral subatomic particles that are a part of every atomic nucleus, except the exception of regular hydrogen. Its rest mass of 1.67927980 10-27 Kg is slightly larger than a proton but 1838.68 times greater than an electron. It has no electricity charge. The dense inner core of the atom is where protons and neutrons, collectively referred to as nucleons, are linked together and account for 99.9% of the mass of the atom.

To learn more about neutron , visit;

https://brainly.com/question/6357434

#SPJ13

Answer:  a large number of plants with a small number of carbon sources.  

Explanation:  the Formula for photosynthesis is

6CO2 + 6H2O → C6H12O6 + 6O2

So to use the carbon dioxide from the atmosphere to produce sugar and oxygen the more the atmosphere CO2 is available rather than other sources of carbon would allow plants to fully utilize the CO2 in the atmosphere.  

a large number of plants would use more CO2 than a small number of plants.  

The label of a bag of potato chips that contains 20 chips using calorimetry will be 400,000J.

Calorimetry is the science of measuring the heat absorbed or evolved during the course of a chemical reaction or change of state.

A bomb calorimeter is a type of constant-volume calorimeter in which material is burned to measure its heat content.

According to this question, a bomb calorimetry measurement indicates that a single potato chip has a heat content of 20,000J. This amount is specifically for only one chip, hence, the amount of multiple chips can easily be calculated as follows:

Heat energy of 20 chips = 20,000J × 20 chips

Heat energy of 20 chips = 400,000J

Therefore, 400,000J of energy will be on the label bag.

Learn more about calorimetry at: https://brainly.com/question/24245395

#SPJ1

Answer: supercalifragilisticexpialidocuos

Explanation:

According to the Van’t Hoff factor, 0.01M [tex]ZnCl_2[/tex] will have the lowest freezing point.

The difference between a substance's concentration as determined by its mass and the concentration of particles that are actually formed when it dissolves is known as the Van 't Hoff factor, or i.

The quantity of ions that are produced during the dissolution of an ionic substance is the ideal Van 't Hoff factor.

According to Van’t Hoff factor, i, NaCl = 2

Therefore, 2 x 0.01 = 0.02M

According to Van’t Hoff factor, i, [tex]ZnCl_2[/tex] = 3

Therefore, 3 x 0.01 = 0.03M

ΔT = i x m x Kf

Higher the concentration of the particles, the lower the freezing point will be.

Therefore, 0.01M [tex]ZnCl_2[/tex] will have the lowest freezing point among the two solutions.

Learn more about Van’t Hoff factor here:

https://brainly.com/question/26231160

#SPJ4

According to the solving the density of the marble is:

D = 2.5 g/cm^3

The amount of mass that a substance has per unit volume is known as its density. If two materials occupy the same volume, the one with a higher density would weigh more than the one with a lower density.

Utilizing the density formula is another approach to determining an object's weight-to-volume ratio. Since you only need to perform one operation to find it, the computation is not too difficult.

The density formula is as follows:

D = m / v,

where:

D - density;

m - mass; and

v - volume.

m - 5grams

v - 2cm

D -

Putting the value in the formula we get:

D = 5/ 2,

D = 2.5 g/cm^3

According to the solving the density of the marble is:

D = 2.5 g/cm^3

To know more about density visit:

https://brainly.com/question/6107689

#SPJ10

The alum produced during experiment for every 210 can is 38.21 kg

Experiment can be defined as a technique used to establish or refute a hypothesis, or to determine the efficacy or likelihood of anything new.

It can also be defined as a series of acts and observations carried out in the context of attempting to solve a specific problem or question.

According to your experiment 0.4996 gram of aluminum will produce 5.183 grams of alum.

Mass of 1 aluminum can = 13.5 g

Mass of 210 can = 13.5 x 210 = 2835g

Mass of alum produced by one gram of aluminum = 13.48 g

Mass of alum produced by 2835 g = 13.48 x 2835

                                                          = 38.21 kg

The amount of alum produced by 210 can = 38.21 kg

Thus, the alum produced during experiment for every 210 can is 38.21 kg

To learn more about experiment, refer to the link below:

https://brainly.com/question/11256472

#SPJ1

Answer:

N-16

Explanation:

Atom has 7 protons so it's atomic number is 7, which is Nitrogen

so isotope is 7 + 9 = 16

then it's N-16

The difference between covalent and ionic bonds is that covalent bonding allows atoms to share electrons, but ionic bonding cause electron transfer, leading the atoms to form ions (cations and anions), and these oppositely charged ions are attracted to each other.

Atoms combine to create compounds in order to complete their octet and to achieve stability. This can be done by combining with other atoms either by electron sharing or electron transfer from one atom to another. Therefore, covalent bonds are created when electrons are shared, whereas ionic bonds are created when electrons are transferred.

Ionic bonds are generally formed between metal and nonmetal atoms. Non-metallic atoms gain electrons to form a negatively charged ion, while metallic atoms lose electrons to form positively charged ions. An atom becomes a cation when one or more of its electrons are lost, while an atom forms an anion when one or more electrons are gained. Hence, an ionic bond is formed as a result of the electrostatic attraction between oppositely charged ions.

A covalent bond, on the other hand, is formed between non-metal atoms as a result of electron sharing.

Therefore, an ionic bond is an attraction between ions with opposite charges whereas a covalent bond is the sharing of electrons between atoms.

Read more about Ionic & Covalent Bonds:

https://brainly.com/question/13640352

#SPJ9

0.003 moles of NaOH was used in the titration.

The concentration of an identified analyte can be found using a simple laboratory technique called titration. As a standard solution with a given concentration and volume, a reagent known as the titrant or titrator is created.

By using a solution with a known concentration to measure the concentration of an unknown solution, this process is known as titration. To a known volume of the analyte (the unknown solution), the titrant (the known solution) is typically added from a buret until the reaction is finished. To ascertain the unknown concentration of an identifiable analyte, titration, commonly referred to as titrimetry, is a widely used quantitative laboratory analytical technique (Medwick and Kirschner, 2010). Volume measurements are a crucial component of titration

Concentration in mol/dm3 =

Amount of solution mol

= concentration in mol/dm3 × volume in dm3

Amount of sodium hydroxide

= 0.100 × 0.0250

= 0.00250 mol

To know more about titration, visit:

https://brainly.com/question/27394328

#SPJ9

Answer:

You would want a metal that transfered heat efficiently.

Explanation:

We use metal frying pans to cook our food because they conduct heat. They are conductors of heat, if it was not so, they could not be used for cooking food.

Hope this helps! :)

Going by the remnant charge, if a negatively charged substance is brought near the ion, an attraction will take place. The ion will attract the substance because the ion has more protons than electrons.

According to established law, substances with like charges repel one another while those with unlike charges tend to attract.

Considering the ion in question, there are 3 positive and 2 negative charges. This means that the ion has one remnant positive charge. In other words, the ion has more protons than electrons.

If a substance that is negatively charged is brought near the ion, an attraction will take place. This is because both the ion and the substance have unlike charges.

In summary, there will be an attraction between the ion and the substance because the ion has more protons (positive charges) than electrons (negative charges).

More on the law of attractions can be found here: https://brainly.com/question/2287677

#SPJ1

Answer:

The ion will repel the substance because the ion has more protons than electrons.

Explanation:

Because the ion has more protons than electrons the ion will repel the substance :)

Answer: 2

Explanation: Every non-zero digit is a significant digit.

Answer:

2 significant figures.

Explanation:

38 contains 2 significant figures.

The balanced reaction equations are given below. They are all examples of double displacement.

a) balanced reaction equation of the reaction between aqueous copper(II) nitrate and aqueous potassium hydroxide, resulting in the formation of solid copper(II) hydroxide and aqueous potassium nitrate

[tex]Cu(NO_{3} )_{2}(aq)+2KOH(aq)[/tex] → [tex]Cu(OH)_{2} (s) + 2KNO_{3}(aq)[/tex]

b) balanced reaction equation of the double displacement between gaseous boron cyanide and liquid water resulting in the formation of solid boric acid and gaseous hydrogen cyanide

[tex]2B(CN)_{3} (g) + 6H_{2} O[/tex] → [tex]2H_{3} BO_{3} (s)+6HCN(g)[/tex]

c) balanced reaction equation between solid calcium silicate and gaseous hydrogen fluoride resulting in the formation of gaseous silicon fluoride, solid calcium fluoride and liquid water

[tex]CaSiO_{3}(s) + 6HF (g)[/tex] → [tex]SiF_{4}(g)+CaF_{2}(s)+3H_{2}O(l)[/tex]

d) balanced reaction equation between cyanogen gas and liquid water resulting in formation of aqueous oxalic acid and gaseous ammonia

[tex](CN)_{2}(g) + 4H_{2} O (l)[/tex] → [tex]H_{2} C_{2} O_{4} (aq) +2NH_{3} (g)[/tex]

You can learn more about double displacement reactions here:
brainly.com/question/13522228

#SPJ4

Answer:

21.107

Explanation:

because this answer gives you 10 and also 90

1) This is an Anion

2) This is a Cation

3) It is Neutral.

Atom: A chemical element is uniquely defined by its atoms, which are tiny pieces of substance. An atom is made up of a core nucleus and one or more negatively charged electrons that orbit it. The positively charged, comparatively hefty protons and neutrons that make up the nucleus may be present.

1) number of protons = 7

So, the atomic number = 7

N has an atomic number of 7.

charge = number of proton - number of electrons

= 7 - 10

= -3

So, this is an anion

symbol: N3-

atoms or ion: anion

number of protons = 7

number of electrons = 10

2) charge = +3

Pd has an atomic number of 46.

number of protons = 46

charge = number of proton - number of electrons

+3 = 46 - number of electron

number of electron = 43

since the charge is positive it is a cation

symbol: Pd3+

atoms or ion: cation

number of protons = 46

number of electrons = 43

3) number of protons is 28

So, the atomic number is 28

Ni has an atomic number of 28.

since it is neutral,

number of electron = number of proton = 28

symbol: Ni

atoms or ion: neutral atom

number of protons = 28

number of electrons = 28

To know more about Atoms, refer to this link:

https://brainly.com/question/13654549

#SPJ9

Chemical element chlorine has the atomic number 17 and the symbol Cl. The second-lightest halogen, fluorine is situated between bromine and fluorine in the periodic table and has most of its features in the middle of those two elements. Chlorine is an odorless, yellow-green gas at room temperature.

Chlorine is found in nature in the ratios of 75.53% and 24.47% as the isotopes "CI35" (atomic mass = 34.969 amu) and "CI37" (atomic mass = 36.966 amu). The atomic masses of the two chlorine isotopes are 35 u and 37 u.

The two chlorine isotopes, 35Cl and 37Cl, have a respective ratio of 3:1.

Cl-37 atoms has a total of 37 nucleons—17 protons and 20 neutrons—make up its nucleus. Natural chlorine is composed of chlorine-37, which makes up 24.23%, and chlorine-35, which makes up 75.77%. This gives chlorine atoms in bulk an apparent atomic weight of 35.453(2) g/mol.

To know more about chlorine  isotopes, click on the link below:

https://brainly.com/question/731055

#SPJ9

The number of electrons can be predicted in a neutral atom  because the number of protons and electrons in a neutral atom will be identical, we can readily calculate the electron number from the atomic number.

An atom's atomic number can be used to forecast its electrical structure. The atomic number can be used to forecast the total number of electrons because neutral atoms have an equal number of protons and electrons.

So, If you know what group the atom's element belongs to and the group number correlates to the number of electrons on the valence shell and you can determine how many atoms are on the atom's valence shell.

Learn more about electrons from

https://brainly.com/question/25674345
#SPJ1

The student observed the solution before it wind put into the flame and realized it was similar in texture and colour to,  the lithium chloride the teacher showed them. When they  saw that both lithium chloride and the unknown produced a red flame, they were sure that the unknown must have been lithium chloride as well

A compound refers to a substance consisting of identical molecules composed of atoms of two or more chemical elements.  That is called a chemical compound. A chemical compound means a chemical substance consisting of several similar molecules containing elements of several elements.

Most notably, these molecules are linked by chemical bonds.  A chemical formula expresses the number of atoms of each element in a molecule of a compound. In addition, this chemical formula uses standard abbreviations for chemical elements with numerical signatures.

To learn more about chemical compound, visit;

https://brainly.com/question/26487468

#SPJ13

Answer:

concentrated solar energy

Explanation:

Solar thermal power systems use concentrated solar energy

All solar thermal power systems have solar energy collectors with two main components: reflectors (mirrors) that capture and focus sunlight onto a receiver.

Based on the number of particles involved and the enthalpy of the reaction, changes that would shift the equilibrium to the right would, according to Le Chatelier's principle, include increasing the volume of the system, reducing the pressure of the system, reducing the temperature of the system, increasing the concentration of ammonia and/or oxygen and reducing the concentration of NO and/or water. Changes in the opposite direction would cause the equilibrium to shift towards the reactants.

Upon increasing pressure or reducing volume, the equilibrium shifts in the direction that produces fewer gaseous particles. In this case, that's the reactants (9 molecules) and not the products (10 molecules). When considering temperature, it is useful to consider heat as one of the reaction components. When the enthalpy of the reaction is negative, heat is produced so it can be considered to be one of the products. Le Chatelier's principle states that upon changing one of the variables, the equilibrium will shift in the direction that counteracts the effects of the change. So, when reducing the temperature of the system, we are taking the heat out of the system, so equilibrium will shift to the products so that it can produce more heat, and vice versa. The same principle applies to the concentrations of ammonia, oxygen, water, and NO.

You can learn more about Le Chatelier's principle here:
brainly.com/question/2001993

#SPJ4

1. Iceberg

2. The iceberg is more underwater than the ship.

Thanks to radar technology better crew training and iceberg monitoring systems, ship collisions with icebergs are generally avoidable, but when a collision does occur, the consequences can be devastating. These things are very rare. One of the rare but high-impact risks. The Titanic was neither the first nor the last ship to hit an iceberg and sink.

Here are the ten most sunk ships in the world in terms of lives lost due to iceberg accidents. A second study by British historian Tim Martin argued that atmospheric conditions on the night of the disaster may have caused a phenomenon called super refraction. This diffraction of light may have created a mirage or optical illusion that obscured the iceberg from the Titanic's vantage point.

Learn more about An iceberg here:-https://brainly.com/question/17873919

#SPJ1

Answer:

It is a neutralization reaction.

There's approximately 15.8 g of NaOCl in a cup of bleach. To calculate this we need to use the molarity of the bleach solution and the molar mass of sodium hypochlorite.

In order to convert the molarity to mass, we need the molar mass of sodium hypochlorite. We can calculate it by adding up the relative atomic masses of sodium (23), oxygen (16), and chlorine (35.5):

M (NaOCl) = (23 + 16 + 35.5) g/mol = 74.5 g/mol

Now we calculate the amount (in moles) of sodium hypochlorite present in 250 mL (0.25 L) of bleach:

c = n/V ⇒ n = c*V = 0.850 M * 0.250 L = 0.2125 mol of NaOCl

Using the molar mass, we can now calculate the mass required:

n = m/M ⇒ m = n*M = 0.2125 mol * 74.5 g/mol = 15.8 g of NaOCl

You can learn more about molarity here:
brainly.com/question/2817451

#SPJ4

The masses of each of the substances after the reaction is;

Let us recall that the limiting reactant is the reactant that is present in the least amount that is possible. This implies that  once the limiting reactant is exhausted, then the reaction would have to come to a stop.

Now;

Number of moles of iron III oxide = 960 g/160 g/mol = 6 moles

Number of moles of CO = 420 g/28 g/mol = 15 moles

Now;

1 mole of iron III oxide reacts with 3 moles of CO

x moles of iron III oxide reacts with 15 moles of CO

x = 1 mole * 15 moles / 3 moles

= 5 moles

Hence iron III oxide is the excess reactant

It the follows that;

Mass of iron;

If 3 moles of CO produced 2 moles of Fe

15 moles of Co would produce 15 moles * 2 moles /3 moles = 10 moles

Mass of Fe = 10 moles * 56 g/mol = 560 g

Mass of carbon dioxide

3 moles of CO produced 3 moles of carbon dioxide

Mass of carbo dioxide =  15 moles * 44  g/mol = 660 g

Mass of iron III oxide left over;

1 mole * 160 g/mol = 160 g

Learn more about stoichiometry:https://brainly.com/question/9743981

#SPJ1

Answer:

The ion will repel the substance because it has more electrons than protons.

Explanation:

there are more electrons (negative) than protons (postitive)

The mass of water produced from 50 g of hydrochloric acid and excess potassium hydroxide is determined to be 24.7 grams.

The balanced chemical reaction of equation is :

HCl + KOH  →  H₂O + KCl

First we will convert the mass of HCl from grams to moles,

Molar mass of HCl = 1.008 g/mol + 35.45 g/mol

Molar mass of HCl = 36.45 g/mol

Then, we will convert the mass of H₂O from grams to moles,

Molar mass of H₂O = 2 x (1.008 g/mol) + 16.00 g/mol

Molar mass of H₂O = 18.01 g/mol

Now, we will calculate the moles of HCl

Moles of HCl = Given mass

                         Molar mass

Moles of HCl =  50 g     = 1.37 mol

                         36.45 g

We know that,

1 mole of HCl is required to produce 1 mole of water

Then, 1.37 mole of HCl forms 1.37 mole x 18.01 g = 24.7 grams

                                                          1 mole

Hence,

The mass of water produced is 24.7 grams.

To learn more about hydrochloric acid,

brainly.com/question/1349091

#SPJ1

The percentage by mass of hydrogen in the Compound that is formed is found to be 5% if 1.0g of hydrogen reacts Completely with 19.0g of fluorine.

A component in a particular combination or a concentration can be described using the mass percent symbol. The mass of solute contained in a specific mass of solution is indicated by the mass percentage used to characterize the solution composition. The concentration of the solute is expressed in terms of mass or moles.

As a mass percentage, an element's concentration in a compound or component of a combination can be represented. The mass percentage is calculated by multiplying the result by 100% after dividing the combined mass by the masses of each component. Also called Mass Percent or (w/w) Percent.

[tex]\frac{1}{2} H_{2} + \frac{1}{2} F_{2}[/tex] →[tex]HF[/tex]

Percentage by mass hydrogen

= (Mass of hydrogen) / (Mass of Hydrogen fluoride) x 100%

= [tex]\frac{1}{20}[/tex] x 100%

=5%

To know more about percent by mass visit:

https://brainly.com/question/14990953

#SPJ9

a)The 4.48 mol H₂O₂ contains 8.96 moles of oxygen atoms.

b)The 2.15 mol N₂O contains 2.15 moles of oxygen atoms.

c)The 0.0237 moles H₂CO₃ contains 0.0711 moles of oxygen atoms.

d)The 24.1 mol CO₂ contains 48.2 moles of oxygen atoms.

A mole is 6.02214076 x 1023 of any chemical unit, comprising atoms, molecules, ions, and others. Due to the large number of atom, molecules, or other components that comprise any material, the mole is an useful unit to utilize.

There are two moles of H and two moles of O in every mole of H₂O₂

There are two moles of N and one mole of O in every mole of N₂O

There are 2 moles of H, 1 mole of C, and 3 moles of O in a mole of H₂CO₃

1 moles of C and 2 moles of O are present for every mole of CO₂

Taking this into account:

The number of moles of oxygen atoms present in a 4.88 moles sample of H₂O₂ can be determined by:

[tex]\text { 4.48 molesof } \mathrm{H}_2 \mathrm{O}_2 x \frac{2 \text { moleso foxygen }}{1 \text { moleof } \mathrm{H}_2 \mathrm{O}_2}=[/tex]8.96 moles of oxygen atoms

The 4.48 mol H₂O₂ contains 8.96 moles of oxygen atoms.

The number of moles of oxygen atoms present in a 2.15 moles sample of N₂O can be determined by:

[tex]2.15 \text { molesof } N_2 O x \frac{1 \text { molesofoxygen }}{1 \text { moleof } N_2}=[/tex]2.15 moles of oxygen atoms

The 2.15 mol N₂O contains 2.15 moles of oxygen atoms.

The number of moles of oxygen atoms present in a 0.0237 moles sample of H₂CO₃ can be determined by:

[tex]0.0237 \text { molesof } \mathrm{H}_2 \mathrm{CO}_3 x \frac{3 \text { moleso foxygen }}{1 \text { moleof } \mathrm{H}_2 \mathrm{CO}_3}=[/tex]0.0711 moles of oxygen atoms

The 0.0237 moles H₂CO₃ contains 0.0711 moles of oxygen atoms.

The number of moles of oxygen atoms present in a 24.1 moles sample of CO₂ can be determined by:

[tex]24.1\text { molesofC } \mathrm{CO}_2 x \frac{2 \text { moleso foxygen }}{1 \text { moleof } \mathrm{CO}_2}[/tex]=48.2 moles of oxygen atoms

The 24.1 mol CO₂ contains 48.2 moles of oxygen atoms.

To know more about mole visit:

https://brainly.com/question/26416088

#SPJ13