Answer:
f. 0.0537 kg
Explanation:
To solve this, we use the formula for force of buoyancy (Fb) = Vs × D × g
Where; Fb= Force of buoyancy
Vs= Volume of submerged
block
D= Density of water that block
submerges in
g= acceleration due to gravity
In this question, volume of block can be calculated using L×B×H
= 4.3cm × 5.9cm × 2.75cm = 69.7675cm^3
If 77% of the block is submerged in water, then 77/100 × 69.7675cm^3
= 53.72cm^3 is the Volume of submerged block
Density of water is known as 1000kg/m^3 while the gravitational force is 10m/s^2
We need to convert the Vs (volume of submerged block) to m^3 by dividing by 1,000,000
Hence, Vs = 53.72/1000000
Vs= 0.00005372m^3
Using the formula; (Fb) = Vs × D × g
Fb = 0.00005372m^3 × 1000kg/m^3 × 10m/s^2
Fb = 0.5372kg/m/s^2
Therefore, the force of buoyancy of the object on water is 0.5372kg/m/s^2
Recall that; Mass (m) = Volume (V) × Density (D)
Force of buoyancy (Fb) = Vs×D = mass (m) × acceleration due to gravity (g)
i.e. mass = Fb/g
= Mass of the block = 0.5372/10
Mass = 0.05372kg
Therefore, the mass of the block in kg is 0.05372kg
name of element flaurine what is latin name
Answer:
Fluere
i hope this helps!
Which of the following statements correctly represents the relationships between molecular motion and pressure?
a. The greater the molecular motion, the less pressure the molecules exert
b.The greater the molecular motion the greater the pressure the molecules exert
c. Molecular motion is not related to the pressure the molecules exert
d. None of the above
A solution of 100.0 mL of 0.200 M KOH is mixed with a solution of 200.0 mL of 0.150 M NiSO4. (a) Write the balanced chemical equation for the reaction that occurs. (b) What precipitate forms? (c) What is the limiting reactant? (d) How many grams of this precipitate form? (e) What is the concentration of each ion that remains in solution?
Answer:
a) 2KOH + NiSO₄ → K₂SO₄ + Ni(OH)₂
b) Ni(OH)₂
c) KOH
d) 0.927 g
e) K⁺=0.067 M, SO₄²⁻=0.1 M, Ni²⁺=0.067 M
Explanation:
a) The equation is:
2KOH + NiSO₄ → K₂SO₄ + Ni(OH)₂ (1)
b) The precipitate formed is Ni(OH)₂
c) The limiting reactant is:
[tex] n_{KOH} = V*M = 100.0 \cdot 10^{-3} L*0.200 mol/L = 0.020 moles [/tex]
[tex] n_{NiSO_{4}} = V*M = 200.0 \cdot 10^{-3} L*0.150 mol/L = 0.030 moles [/tex]
From equation (1) we have that 2 moles of KOH react with 1 mol of NiSO₄, so the number of moles of KOH is:
[tex] n = \frac{2}{1}*0.030 moles = 0.060 moles [/tex]
Hence, the limiting reactant is KOH.
d) The mass of the precipitate formed is:
[tex] n_{Ni(OH)_{2}} = \frac{1}{2}*n_{KOH} = \frac{1}{2}*0.020 moles = 0.010 moles [/tex]
[tex] m = n*M = 0.010 moles*92.72 g/mol = 0.927 g [/tex]
e) The concentration of the SO₄²⁻, K⁺, and Ni²⁺ ions are:
[tex]C_{K^{+}} = \frac{2*\frac{1}{2}*n_{KOH}}{V} = \frac{0.020 moles}{0.300 L} = 0.067 M[/tex]
[tex]C_{SO_{4}^{2-}} = \frac{\frac{1}{2}*n_{KOH + (0.03 - 0.01)}}{V} = \frac{0.030 moles}{0.300 L} = 0.1 M[/tex]
[tex]C_{Ni^{2+}} = \frac{0.020 moles}{0.300 L} = 0.067 M[/tex]
I hope it helps you!
The mass of precipitate formed is 0.93 g .
The equation of the reaction is;
NiSO4(aq) + 2KOH(aq) ---->K2SO4(aq) + Ni(OH)2(s)
The precipitate that forms is Ni(OH)2(s).
To obtain the limiting reactant;
Number of moles of NiSO4 = 200/1000 × 0.150 M = 0.03 moles
Number of moles of KOH = 100/1000 × 0.200 M = 0.02 moles
Since 1 mole of NiSO4 reacts with 2 moles of KOH
x moles of NiSO4 reacts with 0.02 moles of KOH
x = 1 mole × 0.02 moles/2 moles = 0.01 moles of NiSO4
Hence, KOH is the limiting reactant.
Now;
Since 2 mole of KOH yields 1 mole of Ni(OH)2
0.02 moles of KOH yields 0.02 moles × 1 mole/ 2 mole = 0.01 moles of Ni(OH)2
Mass of Ni(OH)2 produced = 0.01 moles of Ni(OH)2 × 93 g/mol = 0.93 g
Learn more: https://brainly.com/question/9743981
How many significant figures does the number 0.00650
have?
Answer:
3
Explanation:
For decimals, you always start at the first non-zero number and count all the way to the end of the number. To count the number of significant figures this number has, you start at 6 and count every number after that for a total of 3.
For each case below, identify the most likely value for x: a. BHx b. CHx c. NHx d. CH2Clx
Answer:
BHx, x=3
CHx, x=4
NHx, x=3
CH2Clx, x=2
Explanation:
We have to know that the value of x must depend on the valency of the central atom. If we look at each of the species;
Boron has a common valency of 3
Carbon has a common valency of 4
Nitrogen has a common valency of 3
The valency of each elements will determine the most likely value of x as outlined in the answer above.
Which of the following have a neutral charge. Electron, plasma, neutron, or proton
In the Chocolate Chip Rock Cycle Lab,
what was represented by stirring the
melting chips with a spatula?
B. convection currents
A. weathering
C. deposition
D. erosion
Use the virtual lab to prepare 150.0 ml of an iodine solution with a concentration of 0.06 g/ ml from the bottle of 0.12g/ml iodine solution
Answer:
Explanation:
In 150 ml of .06 g / ml solution , gram of iodine = 150 x .06 g = 9 g
Let volume of given concentration of .12 g / ml required be V
In volume V , gram of iodine = V x .12 g
According to question
V x .12 = 9 g
V = 9 / .12 = 75 ml
So, 75 ml of .12 g/ml will be taken and it is diluted to the volume of 150 ml to get the solution of required concentration .
Which of the following does not involve chemical processes? A. cooking of food B.Changing of fruit color when it ripens C.Burning of Wood D.None of the above
Answer:
c because a chemical process is when something changes into another thing which the wood would be doing if you burned it
Rank these hydrocarbons in order from predicted highest boiling point to lowest boiling point: a. CH3CH3b. CH3CH2CH3c. CH3CH2CH2CH3d. CH3CH(CH3)2
Answer:
c. CH3CH2CH2CH3 > d. CH3CH(CH3)2 > b. CH3CH2CH3 > a. CH3CH3
Explanation:
Hello,
In this case, considering the physical properties of hydrocarbons we find that the longer the carbon chain, the higher the boiling point as more energy is required for the phase transition from liquid to gas, thus, we see that c. CH3CH2CH2CH3 and d. CH3CH(CH3)2 have the highest boiling points since they have four carbons both. Then, we have b. CH3CH2CH3 which has three carbon atoms and the lowest boiling point is had by a. CH3CH3.
Nevertheless for both c. and d. we can see that c. has a straight chain whereas d. a branched chain, it means that c, has the highest boiling point due to the higher surface area for energy transfer.
Therefore, the order from highest to lowest is:
c. CH3CH2CH2CH3 > d. CH3CH(CH3)2 > b. CH3CH2CH3 > a. CH3CH3
Regards.
The diagram shows the layers formed when 10 mL each of honey, maple syrup, and corn syrup were slowly poured into a glass cylinder.
A tall cylinder with 3 layers is shown. The top layer is labeled Corn Syrup, the middle layer is labeled Maple Syrup and the bottom layer is labeled Honey.
A ping pong ball released gently into the cylinder floats on top of the corn syrup layer. What best compares the densities of the substances?
Group of answer choices
Honey is denser than corn syrup but less dense than the ball.
All liquids are denser than the ball, and honey is denser than corn syrup and maple syrup.
Corn syrup is denser than the other liquids, and the ball is denser than the liquids.
Corn syrup is denser than the other liquids and the ball.
The correct answer is B. All liquids are denser than the ball, and honey is denser than corn syrup and maple syrup.
Explanation:
Differences in density cause substances such as solids or liquids to float or sink. In general, the substance sinks if it is denser, or floats if it is less dense. In this context, honey is the substance with the most density because it is at the bottom of the container. Also, honey is followed in density by maple syrup, and then by corn syrup. Moreover, if the ping pong ball floats in the most superficial layer, it is because this is less dense than any of the liquids. According to this, it can be concluded honey is denser than the other liquids, and the liquids are denser than the ball (option B.)
Answer:
b is right ( all liquids are denser than the ball and honey is denser than corn syrup.)
Explanation:
If a buffer solution is 0.260 M in a weak acid (Ka=8.3×10−5) and 0.480 M in its conjugate base, what is the pH?
Answer: pH = 4.3
Explanation: The pH of a buffer solution and its conjugate base can be determine by the Henderson-Hasselbach Equation. It can be estimated because equilibrium between weak acid and its conjugate base allows the solution to not change pH when small amounts of strong acid or base are added.
pH is calculated by:
[tex]pH = pK_{a} + log(\frac{[conjugate]}{[acid]} )[/tex]
pKa is the acidic dissociation constant and it shows how much strong an acid can be. It is determined as:
[tex]pK_{a}=-log(K_{a})[/tex]
For the buffer solution:
[tex]pK_{a}=-log(8.3.10^{-5})[/tex]
[tex]pK_{a}=4.081[/tex]
Calculating pH:
[tex]pH = 4.081 + log(\frac{0.480}{0.260} )[/tex]
[tex]pH = 4.081 + log(1.846)[/tex]
pH = 4.3
For this buffer solution and its conjugate, pH = 4.3
Each of these geometric shapes has adifferent number of sides. Arrange the shapes in order from theshape with the greatest number of sides to the shape with thefewest number of sides.Rank these shapes from greatest tofewest number of sides. To rank items as equivalent, overlapthem.triangle , square, rectangle, octagon, hexagon, pentagon
Answer:
Octagon > Hexagon > pentagon > square and rectangle > triangle
Explanation:
As we know that
Triangle contains 3 slides
Rectangle contains 4 slides
Square contains 4 slides
Octagon contains 8 slides
hexagon contains 6 slides
Pentagon contains 5 slides
Now based on this
The ranking is as follows
Octagon > Hexagon > pentagon > square and rectangle > triangle
This is the correct order from high to low
The bird bobbed its head up and down.
A) qualitative
B) quantitative
"The bird bobbed its head up and down" it is qualitative. So, A is correct.
What is quantitative and qualitative?Quantitative data is numbers-based, countable, or measurable. Qualitative data is interpretation-based, descriptive, and relating to language. Quantitative data tells us how many, how much, or how often in calculations. Qualitative data can help us to understand why, how, or what happened behind certain behaviors.
That statement given in the question is not telling us about any quantity or any number, it is telling us about certain behavior.
Quantitative Information – Involves a measurable quantity—numbers are used. Some examples are length, mass, temperature, and time. Quantitative information is often called data, but can also be things other than numbers. Qualitative Information – Involves a descriptive judgment using concept words instead of numbers.
Therefore, "The bird bobbed its head up and down" it is qualitative. So, A is correct.
Learn more about quantitative and qualitative, here:
https://brainly.com/question/12831013
#SPJ7
The concentration of protein in a urine sample is calculated to be 2.77 μg/mL. What is the concentration of this solution in units of pounds per gallon (lb/gal)?
Answer:
The concentration of this solution in units of pounds per gallon is [tex]2.776*10^{-5} \frac{lb}{gal}[/tex]
Explanation:
Units of measurement are established models for measuring different quantities. The conversion of units is the transformation of a quantity, expressed in a certain unit of measure, into an equivalent one, which may or may not be of the same system of units.
In this case, the conversion of units is carried out knowing that 1 μg are equal to 2.205*10⁻⁹ Lb and 1 mL equals 0.00022 Gallons. So
[tex]2.77 \frac{ug}{mL} = \frac{2.77 ug}{mL}[/tex]
If 1 μg equals 2.205*10⁻⁹ lb, 2.77 μg how many lb equals?
[tex]lb=\frac{2.77ug*2.205*10^{-9}lb }{1ug}[/tex]
lb=6.10785*10⁻⁹
So, 2.77 μg= 6.10785*10⁻⁹ lb
Then:
[tex]2.77 \frac{ug}{mL} = \frac{2.77 ug}{mL}=\frac{6.10785*10^{-9}lb }{mL} =\frac{6.10785*10^{-9}lb }{0.00022 gal} =\frac{6.10785*10^{-9}lb }{0.00022 gal}[/tex]
You get:
[tex]2.77 \frac{ug}{mL} = 2.776*10^{-5} \frac{lb}{gal}[/tex]
The concentration of this solution in units of pounds per gallon is [tex]2.776*10^{-5} \frac{lb}{gal}[/tex]
Initially, scientists described atoms as the smallest particles of matter. However, smaller particles within atoms were discovered. How did the scientific world respond to this new information? by ignoring the new information because it went against a scientific law by discarding the old theory about atoms and making a new one by revising the theory that explained atoms to include this new information by designing new technology that would prove the new information was wrong
Answer:
By designing new technology that would prove new information
Explanation:
im not sure about the answer but i just did the test and "by designing new technology that would prove the new information was wrong" isint the answer
Compare and contrast the results between the commercial and homemade pH test strips. Which test strips were more accurate? Explain your answer.
Answer:
See explanation
Explanation:
Homemade pH test strips make it a bit difficult to identity the colours that indicate various values of pH on a pH colour scale. These homemade pH strips make the results of the experiment more prone to human error. Also the creator of the test strip is also prone to human error during the creation of the strip.
The commercial pH test strips are more accurate when used.
please answer these true false
Answer:
False
False
they both will stay on the water
Hope this helped
The total volume of seawater is 1.5 x 10²¹ L. Seawater contains approximately 3.5% sodium chloride by mass. At that high of a concentration of salt within the water, the density of water is 1.03 g/mL. Calculate the total mass of sodium chloride, in grams, contained in all the seawater in the world.
Answer:
There are [tex]5.408\times 10^{22}[/tex] grams contained in all the seawater in the world.
Explanation:
At first let is determinate the total mass of seawater ([tex]m_{sw}[/tex]), measured in grams, in the world by definition of density and considering that mass is distributed uniformly:
[tex]m_{sw} = \rho_{sw}\cdot V_{sw}[/tex]
Where:
[tex]\rho_{sw}[/tex] - Density of seawater, measured in grams per liters.
[tex]V_{sw}[/tex] - Volume of seawater, measured in liters.
If [tex]V_{sw} = 1.5\times 10^{21}\,L[/tex] and [tex]\rho_{sw} = 1030\,\frac{g}{L}[/tex], then:
[tex]m_{sw}=\left(1030\,\frac{g}{L} \right)\cdot (1.5\times 10^{21}\,L)[/tex]
[tex]m_{sw} = 1.545\times 10^{24}\,g[/tex]
The total mass of sodium chloride is determined by the following ratio:
[tex]r = \frac{m_{NaCl}}{m_{sw}}[/tex]
[tex]m_{NaCl} = r\cdot m_{sw}[/tex]
Given that [tex]m_{sw} = 1.545\times 10^{24}\,g[/tex] and [tex]r = 0.035[/tex], the total mass of sodium chloride in all the seawater in the world is:
[tex]m_{NaCl} = 0.035\cdot (1.545\times 10^{24}\,g)[/tex]
[tex]m_{NaCl} = 5.408\times 10^{22}\,g[/tex]
There are [tex]5.408\times 10^{22}[/tex] grams contained in all the seawater in the world.
Following are the calculation to the total mass of sodium chloride in grams:
Given:
Seawater volume[tex]= 1.5 \times 10^{21}\ L\\\\[/tex]
Seawater density [tex]= 1.03\ \frac{g}{mL}\\\\[/tex]
[tex]\%[/tex] of sodium chloride in seawater [tex]= 3.5\ \%[/tex]
To find:
The total mass of sodium chloride in grams=?
Solution:
The total volume of seawater [tex]= 1.5 \times 10^{21}\ L= 1.5 \times 10^{24}\ mL\\\\[/tex]
The density of seawater [tex]= 1.03 \frac{g}{mL}[/tex]
[tex]\therefore\\\\[/tex]
Seawater mass = Seawater volume [tex]\times[/tex] density
[tex]= 1.5 \times 10^{24}\times 1.03 \ g\\\\= 1.545 \times 10^{24}\ g\\\\[/tex]
[tex]\%[/tex] of sodium chloride in seawater [tex]= 3.5\ \%[/tex]
[tex]\therefore\\\\[/tex]
Calculating the sodium chloride mass in Seawater:
[tex]= 3.5\% \ \ of\ \ 1.545 \times 10^{24} \ g\\\\ =\frac{3.5}{100} \times 1.545 \times 10^{24}\ g\\\\= 5.4075 \times 10^{22} \ g\\\\[/tex]
Calculating the sodium chloride mass [tex]= 5.4075 \times 10^{22} \ g\\\\[/tex]
Learn more:
brainly.com/question/2809961
What is the empirical formula of an oxide of chromium that is 48% oxygen
Answer:
[tex]CrO_3[/tex]
Explanation:
Hello,
In this case, considering that the compound is 48% oxygen, we infer it is 52% chromium, therefore, by using their atomic masses we compute the moles by assuming those percentages as masses:
[tex]n_{Cr}=52g*\frac{1mol}{52g}=1mol\\ \\n_O=48g*\frac{1mol}{16g}=3mol[/tex]
Next, by dividing by the smallest moles, we find the subscripts in the empirical formula:
[tex]Cr=\frac{1}{1} =1\\\\O=\frac{3}{1} =3[/tex]
Which are also expressed in the smallest whole numbers, therefore the empirical formula is:
[tex]CrO_3[/tex]
Which corresponds to the chromic oxide or chromium (IV) oxide.
Regards.
Fe(OH)2 Spell out the full name of the compound.
Answer:
Ferrous hydroxide or iron (II) hydroxide.
Explanation:
Hello,
In this case, for the nomenclature of hydroxides we can use two styles:
a. IUPAC: it points out the oxidation state of the given metal by using suffixes ous or ic for metals having to oxidation states, thus, since +2 for iron is the first one, it turns out ferrous hydroxide.
b. Stock: it points out the oxidation state of the given metal by writing it inside parenthesis, thus, it turns out iron (II) hydroxide.
Regards.
The full name of the compound is ferrous hydroxide or iron (II) hydroxide.
Ionic compounds are formed when ions with opposing negative and positive charges form ionic bonds and form compounds, which are compounds made of ions.
Ionic compounds are named by stating the cation first, followed by the anion. When a neutral atom loses one or more electrons, it acquires a positive charge and is called a cation and when an atom gains one or more electrons, it becomes an anion and acquires a negative charge.
Learn more about Naming of compounds, here:
https://brainly.com/question/30962696
#SPJ6
Ammonium perchlorate nh4clo4 is a powerful solid rocket fuel, used in the space shuttle boosters. it decomposes into nitrogen n2 gas, chlorine cl2 gas, oxygen o2 gas and water vapor, releasing a great deal of energy. calculate the moles of ammonium perchlorate needed to produce 1.4 of nitrogen. be sure your answer has a unit symbol, if necessary, and round it to the correct number of significant digits.
Answer:
Explanation:
2 NH₄ClO₄ ⇒ N₂ + Cl₂ + 2O₂ + 4 H₂O
2 moles 1 mole
We are required to produce 1.4 moles of N₂ from ammonium perchlorate .
1 mole of N₂ is produced by 2 moles of ammonium perchlorate
1.4 moles of N₂ will be produced by 2 x 1.4 = 2.8 moles of ammonium perchlorate .
Answer is 2.8 moles .
A pure substance made up of molecules of the same kind of atoms is called...
Answer:
All substances that are made up of the same kind of mole ules are called pure substances.
So what do you mean ?
Explanation:
Answer: all matter is made up of pure substance
Explanation:
The human gut microbiome is a collection of microbes that are necessary for proper function of the digestive system and that contribute to the overall health of the individual. Infants are colonized with these microbes at birth and their nutrition in the early days of life is important for supporting growth of these microbes. Milk sugars are important in development of the microbiome. Which of the following best explains how both lacto-N-tetraose and lacto-N-fucopentaose could contribute to proper development of an infant's microbiome
A. Lacto-N-fucopentaose binds to surface receptors on pathogenic bacteria and prevents them from entering epithelial cells in the intestine.
B. Lacto-N-tetraose prevents pathogenic bacteria from hydrolyzing and metabolizing carbohydrates found in the intestine.
C. Lacto-N-tetraose is a food source for bacteria that aid in digestion of this and other oligosaccharides.
D. Lacto-N-fucopentaose is digested by pathogenic bacteria and, in the process, destroys these types of bacteria.
Answer:
A. Lacto-N-fucopentaose binds to surface receptors on pathogenic bacteria and prevents them from entering epithelial cells in the intestine.
C. Lacto-N-tetraose is a food source for bacteria that aid in digestion of this and other oligosaccharides.
Explanation:
Human milk contains high levels of indigestible Human milk oligosaccharides (HMOs). It is believed that these HMOs influence the process of coevolution of the nursing infant and its microbiome. Lacto-N-fucopentaose (LNFP) is a carbohydrate (i.e., an oligosaccharide) found in human milk. This oligosaccharide is a bioactive molecule that acts as a substrate for the development of the intestinal microflora. LNFP binds to proteins (to form glycoproteins) and lipids (to form glycolipids) localized on the surface of cells. Moreover, Lacto-N-tetraose (LNT) is also an oligosaccharide found in human milk, which is used as food supplement. It has been shown that LNT prevents infection by inhibiting the adhesion mechanism of harmful bacteria and their toxins. Furthermore, LNT stimulates the development of the microbiome in early life.
The process of making proteins using information from DNA is called ___ a. mitosis b. transcription c. replication d. translation e. mitosis
Answer:
Transcription
Explanation:
Transcription is when you make a copy of the RNA from DNA. This is how the mRNA can leave the nucleus which exists to the cytoplasm and into ribosomes where protein synthesis occurs.
What is the mass percent of sucrose (C12H22O11, Mm = 342 g/mol) in a 0.329-m sucrose solution?
Answer:
[tex]\% m/m=10.1\%[/tex]
Explanation:
Hello,
In this case given the molal solution of sucrose, we can assume there are 0.329 moles of sucrose in 1 kg of solvent, thus, computing both the mass of sucrose and solvent in grams, we obtain:
[tex]m_{sucrose}=0.329mol*\frac{342g}{1mol}=112.5g[/tex]
[tex]m_{solvent}=1000g[/tex]
In such a way, we proceed to the calculation of the mass percent as follows:
[tex]\% m/m=\frac{112.5g}{112.5g+1000g}*100\%\\ \\\% m/m=10.1\%[/tex]
Regards.
A sample of marble has a volume of 8cm and density of 2.75g/cm. What is mass?
Answer:
22.0 g
Explanation:
To find the mass, multiply the volume by the density.
8 cm³ × 2.75 g/cm³ = 22.0 g
The marble is 22.0 g.
What happens to the density of a material if you have a larger piece of it?(1 point) A.The density will be smaller because the mass remains the same as the volume increases.
B.The density will remain the same because mass and volume will both increase in the same way.
C. The density will remain the same because mass and volume will remain the same. D.The density will be greater because the mass increases but the volume remains the same.
PLEASSSSSSSSSSSSSE HELPPPPPPPPPPPPP ASAP.........
The change in the density of a material, if you have a larger piece of it, is the density will remain the same because mass and volume will remain the same. The correct option is C.
What is density?Density is mass per volume. It is calculated by dividing the mass by the volume of the substance. It is a scalar quantity, and it is denoted by rho a Greek symbol. Furthermore, it is written in small d.
The density, mass, and volume are related to each other. These quantities do not change with the change in the quantity of the substance. If we take the large weight or quantity of substance, the density of the substance does not change.
Thus, the correct option is C. The density will remain the same because mass and volume will remain the same.
To learn more about density, refer to the link:
https://brainly.com/question/15164682
#SPJ6
What obligations do scientist have to society
Which compound would be expected to show intense IR absorption at 2710 and 1705 cm-1? (Ph = phenyl group)
A. CH2=CHCOCH3
B. PhCHO
C. CH3COCH2CH3
D. PhCOCH3
E. CH3Cl
Answer:
B. PhCHO
Explanation:
Every organic group shows a characteristic IR absorption at certain wavelength . With the help of these absorption spectra we can identify the group present on organic molecules .
The wave number of 2710 cm⁻¹ is absorbed by aldehyde bond stretching .
The wave number of 1705 cm⁻¹ is shown by conjugated aldehyde . So the most likely compound among given compounds is PhCHO .