a cd players operating speed is 1600 rad/s. if it starts from rest and has an acceleration of 400 rad/s, how long does it take to reach full speed

Answers

Answer 1

The time taken for the cd player to reach the full angular speed is 4 seconds.

What is the time of motion of the cd player?

The time of motion of the cd player is calculated by applying the following kinematic equation as shown below.

ωf = ωi + αt

where;

ωf is the final angular velocityωi is the initial angular velocityα is angular accelerationt is the time of motion

Since the cd player started from rest, the initial angular velocity = 0

The time taken for the cd player to reach the full speed is calculated as follows;

1600 = 0 + 440t

1600 = 400t

t = 1600/400

t = 4 seconds

Learn more about angular velocity here: https://brainly.com/question/6860269

#SPJ1


Related Questions

mrs. hogan has given you a box of materials and challenged you to use the materials to determine what effect increasing the current in a wire has on the magnetic field generated around the wire. describe how you can use some, or all, of the materials to determine what effect increasing the current in a wire has on the magnetic field generated around the wire. In your description, be sure to include the following:

Describe how you would use each of the materials you choose to use

Identify your independent and dependent variables, and at least two controlled variables

Create a data table that can be used to record your data

Materials in the Box

4 batteries

wire

directional compass

10 iron nails

a strong permanent magnet

a weak permanent magnet

a voltmeter

a box of paper clips

Answers

The magnetic field is the area around a magnet in which there is magnetic force. Moving electric charges can make magnetic fields.

we are able to make this magnetic field more potent by using growing the quantity of electrical cutting-edge going thru the twine or we are able to grow the variety

A magnetic area is a vector field that describes the magnetic affect on shifting electric costs, electric-powered currents, and magnetic materials. A shifting charge in a magnetic area reviews a force perpendicular to its very own velocity and to the magnetic field.

The force is perpendicular to each the velocity v of the price q and the magnetic field B. 2. The significance of the force is F = qvB sinθ where θ is the angle < a hundred and eighty levels among the rate and the magnetic field.

Examples of magnetic force is a compass, a motor, the magnets that maintain stuff at the fridge, teach tracks, and new roller coasters. All transferring expenses supply upward thrust to a magnetic subject and the charges that flow through its regions, revel in a force

This discipline is shaped via the magnetic strains of pressure which run from the north pole to the south pole. these traces can be located to be most crowded at the 2 ends of the magnet which might be the poles i.e the north pole and the south pole.

Learn more about magnetic force here:-

https://brainly.com/question/2279150

#SPJ1

Antonio has been told that he needs to work on his self- awareness. What might he do to most improve this skill

Answers

For Antonio to improve his self-awareness skills he should be able to recognise hie strengths and his weaknesses.

What is self awareness?

Self awareness is the act of being able to recognise your feelings and keep your character under control.

To be a self awareness leader, one should be able to have the following qualities:

They should be able to recognize their strengths and challenges.They should be able to recognise other people's needs and feelings,They should be able to notice how their behaviour affects the people around them.

Therefore, it can be said for Antonio to improve his self awareness skills, he should be able to recognise his strength and weaknesses and observe how his character affects the people around him.

Learn more about self awareness here:

https://brainly.com/question/28039248

#SPJ1

starting from the sum (3.31) and replacing it by the appropriate integral, find the moment of inertia of a uniform thin square of side 2b, rotating about an axis perpendicular to the square and passing through its center.

Answers

The electron binding energy for gold essence is. find the longest wavelength( in) of light that could eject electrons from gold in a photoelectric effect trial.

Electron

The electron is a subatomic flyspeck( denoted by the symbol whose electric charge is negative one abecedarian charge. Electrons belong to the first generation of the lepton flyspeck family, and are generally allowed to be abecedarian patches because they've no given factors or substructure. The electron's mass is roughly 1/ 1836th that of the proton.

Quantum mechanical parcels of the electron include an natural angular instigation( spin) of a half- integer value, expressed in units of the reduced Planck constant, ħ. Being fermions, no two electrons can enthrall the same amount state, in agreement with the Pauli rejection principle. Like all abecedarian patches, electrons parade parcels of both patches and swells They can collide with other patches and can be diffracted like light. The surge parcels of electrons are easier to observe with trials than those of other patches like neutrons and protons because electrons have a lower mass and hence a longer de Broglie wavelength for a given energy.

Electrons play an essential part in multitudinous physical marvels, similar as electricity, captivation, chemistry and thermal conductivity, and they also share in gravitational, electromagnetic and weak relations. Since an electron has charge, it has a girding electric field, and if that electron is moving relative to an bystander, said bystander will observe it to induce a glamorous field.

To learn more about Monent of inertia click on given link below

https://brainly.com/question/15461378

#SPJ9

a force of 5.0 n is applied to a point object at 30o with the horizontal. another force of 10.0 n is applied at 120o . a) determine the net force (the magnitude and angle)

Answers

The net force calculated is 5 N. The total of all forces exerted on an object is known as the net force. A mass can accelerate due to net force. A body is subject to another force whether it is at rest or in motion.

The combined effect (the sum) of all pushing and pulling forces that are really operating on an object is known as the net force. An object will accelerate in the direction of the net force if the pushing and pulling forces acting on it are not equal (a net force acts).When there are a lot of forces acting on a system, the term "net force" is employed.

We now have a 30° - 60° /90° right triangle because this force does produce a 30° angle with the y-axis.

The force of 10N (hyp.) or sin 30 = x/10N

x = 10N sin 30

x = 5 N is used to find the magnitude of x.

Learn more about force here-

https://brainly.com/question/13191643

#SPJ4

Determine whether each statement describes a solid, liquid, or gas

Answers

Answer:

1.solid

2.gas

3.liquid

4.liquid and gas

5.gas

6.liquid

7.gas

8.liquid and gas

With the aid pf sketch explain uniform speed and uniform velocity

Answers

If a body covers equal distances in equal intervals of time it has uniform speed. If a body covers equal displacement in equal intervals of time it has uniform velocity.

Speed is the rate of change of an object's position with respect to time in any direction. An object will have uniform speed, if the speed of the object remains constant and not varying.

 

Velocity is the rate of change of an object's position with respect to time in a particular direction. Uniform velocity is a condition in which a body covers equal displacements in equal intervals of time.

Therefore, if a body covers equal distances in equal intervals of time it is said to have uniform speed and if it covers equal displacement in equal intervals of time it is said to have uniform velocity.

To know more about Uniform velocity

https://brainly.com/question/19818013

#SPJ1

Which of the following correctly completes box #2 in the chart above?

Answers

City - A city is defined as a group of people living in one place within a county sharing many common characteristics, especially the system of government. Cities are part of counties and counties are part of states.

A 2D column chart shows the evolution of a data series over time or compares multiple items. Element types are arranged horizontally and data values ​​are displayed vertically to emphasize changes over time. Scatter charts have two value axes. It displays one set of numerical data along the horizontal axis and another set along the vertical axis.

Combine these values ​​into individual data points and display them in irregular intervals or clusters. The main function of charts is to display data and explore topics in more detail. Charts are used when a simple table cannot adequately represent important relationships or patterns between data points.

Learn more about The chart here:-https://brainly.com/question/25032284

#SPJ1

a box weighing 500n is at rest on the floor. a person pushes against it and it starts moving when 100n force is applied to it. what can be said about the coefficient of kinetic friction between the box and the floor?

Answers

The coefficient of kinetic friction between the box and the floor is 0.2.

The direction of the kinetic friction force between the box and the floor is the opposite of the velocity, as depicted in the free body diagram on the attached picture.

The second Newton's law of motion:

∑ F = m. a

Let F1 be the person force and f be the kinetic friction force.

Since the box is just about to move, it means a = 0.

F1 - f = 0

f = F1 = 100 Newton

Let N be the normal force and w be the weight of the box.

In the vertical direction:

N - w = 0

N = w = 500 Newton.

It is known that:

f = μ . N

Where:  μ = coefficient of kinetic friction.

Hence,

μ . N = 100

μ  = 100/N = 100/500 = 0.2

Learn more about Newton's law here:

https://brainly.com/question/716216

#SPJ4

spike claims that dimensional analysis shows that the correct expression for change in velocity, , is , where m is mass, t is time, and f is the magnitude of force. carla says that can't be true because the dimensions of force are . which one, if either, is correct? group of answer choices

Answers

Carla says that can't be true because the dimensions of force are Carla because [tex]$[\overrightarrow{\mathrm{v}}]=\left[\frac{\mathrm{L}}{\mathrm{T}}\right]$[/tex].

The correct option is C.

What do dimensions mean?

In physics, a mathematical space's dimension is formally defined as the smallest set of coordinates required to specify any given point. As a result, a line has a dimension of one since a point on it may be specified by a single coordinate, such as the point at 5 on a number line.

Describe the dimension formula:

The definition of the dimensional formula is the correct statement of the physical quantity in terms of its fundamental unit. Dimensional force is one example. F = [M L T-2] It's because Netwon, or kg*m/s2, is the unit of force.

To know more about Dimension visit:

https://brainly.com/question/22695190

#SPJ9

The complete question is-

Spike claims that dimensional analysis shows that the_ correct expression for change in velocity,  is , where m is mass, t is time, and f is the magnitude of force. Carla says that can't be true because the dimensions of force are ML/T2. which one, if either, is correct? group of answer choices

A-Spike because [tex]$[\overrightarrow{\mathrm{V}}]=\left[\frac{\mathrm{ML}}{\mathrm{T}}\right]$[/tex]

B- Spike because[tex]$[\overrightarrow{\mathrm{v}}]=\left[\frac{\mathrm{T}^2}{\mathrm{~L}}\right]$[/tex]

C- Carla because [tex]$[\overrightarrow{\mathrm{v}}]=\left[\frac{\mathrm{L}}{\mathrm{T}}\right]$[/tex]

D- Carla because [tex]$[\overrightarrow{\mathrm{v}}]=\left[\frac{\mathrm{L}}{\mathrm{MT}}\right]$[/tex]

E- Spike because the dimension of force are [tex]$[\overrightarrow{\mathrm{F}}]=\left[\frac{\mathrm{T}^2}{\mathrm{ML}}\right]$[/tex]  


A car starts from rest and accelerates uniformly over a time of 5.21 seconds for a distance of 110.0 m.
Determine the acceleration of the car.

Answers

Answer: a = 8.10 m/s^2

Explanation:

The car starts at rest, so:

V0= 0m/s

t= 5.21m/s

S = 110.0 m

Using one of the five uniformly accelerated motion formulas

S= V0t + 1/2 at^2

but V0 = 0 m/s

S = 1/2 at^2

a= 2S/ t^2

a = 2(110m)/ (5.21 s)^2

a = 8.10 m/s^2

a sled (mass 500 kg) is pulled across a stone floor with a coefficient of kinetic friction of 1.7. the rope that is used to pull it is at an angle $\alpha$ of 55 degrees with the horizontal. when the sled moves at a constant velocity (i.e., no acceleration), the normal force that the floor exerts on the sled is ...

Answers

The normal force that the floor exerts on the sled is 7557 N when is pulled across a stone floor with a coefficient of kinetic friction of 1.7.

What is kinetic friction and how the normal force is calculated to be so?Friction, is a very well-known word in our daily lives, though putting it a little more officially it is the force due which any vehicle, man, or something grips the floor.Friction is of two types kinetic and static, static friction is the friction that opposes the motion and kinetic friction is the friction that regulates the motion.

Here using the formula F = - Uk mg/cos θ - Uksin θ

= -1.7 x 500 x 10/ cos55° - 1.7 sin 55°

= 7557 N

The normal force of 7557 Newton is exerted on the floor by the sled.

To know more about kinetic friction visit:

https://brainly.com/question/13754413

#SPJ9

suppose a boat moves at 16.4 m/s relative to the water. if the boat is in a river with the current directed east at 2.30 m/s, what is the boat's speed relative to the ground when it is heading east, with the current, and west, against the current? (enter your answers in m/s.)

Answers

The boat's speed relative to the ground when it is heading east with the current is 18.7 m/s and west against the current is -14.1 m/s.

In the first case,

The velocity of the boat concerning water= 16.4 m/s

The velocity of the water concerning ground= 2.3 m/s

By using the formula of relative velocity:

V(b, g)= V(b, w) + V(w, g)

V(b, g)= 16.4i + 2.3i m/s

V(b, g)= 18.7i m/s

Hence, the magnitude of the velocity of the boat concerning the ground is 18.7 m/s along the current.

In the second case,

The velocity of the boat concerning water is -16.4 m/s

The velocity of the water concerning the ground is 2.3 m/s

By using the formula for relative velocity:

V(b, g)= V(b, w) + V(w, g)

V(b, g)= -16.4i + 2.3i

V(b, g)= -14.1i m/s

Hence, the magnitude of the velocity of the boat concerning the ground is -14.1 m/s against the current.

Learn more about the speed at:

https://brainly.com/question/13943409

#SPJ9

A race car travels on a racetrack at 44 m/s and slows at a constant rate to a velocity of 22 m/s over 5.5 seconds. How far does it move during this time?

Answers

 The distance traveled by the race car would be 181.5 meters,

What are the 3 equations of motion?First equation of motion: v = u + at.Second equation of motion: s = ut + 12 at2Third equation of motion: v2 = u2 + 2as.Equations of motion are used to describe how a physical system behaves in terms of how its motion changes over time. The behavior of a physical system is described in more detail by the equations of motion as a collection of mathematical functions expressed in terms of dynamic variables. These variables typically consist of space, time, and sometimes elements of momentum. Generalized coordinates, which can be any useful variable a part of the physical system, are the most versatile option. In classical mechanics, the functions are defined in a Euclidean space; in relativity, curved spaces are used instead. The equations are the answers to the differential equations describing the motion of the dynamics if the dynamics of a system are known.

To learn more about : Equations of motion

Ref : https://brainly.com/question/11744179

#SPJ13

a beam of white light is focused on a wafer of a semiconductor. nothing is detected coming through the other side. which semiconductor(s) could it be, and why?

Answers

It would be a diode, also called a rectifier. It's used in electronic circuits to control the flow of current between two points.

Individual electronic parts, such as resistors, transistors, capacitors, inductors, and diodes, are connected by conductive wires or traces that allow electric current to pass through them to form an electronic circuit. It is a particular kind of electrical circuit, and typically at least one active component is required for it to be called an electronic circuits as opposed to an electrical one. Signals may be amplified, calculations can be made, and data can be sent from one location to another thanks to the combination of components and connections.

Typically, an electronic circuits can be classed as an analogue, digital, or mixed-signal circuit within rectifiers. The MOSFET is the semiconductor component utilised in electronic circuits the most (metal-oxide-semiconductor field-effect transistor).

Learn more about electronic circuits here

https://brainly.com/question/20165581

#SPJ4

b. When a certain amount of violet light and yellow light shine on a metal surface, only violet light
produces an electric current. Write 3-4 sentences describing how an increase in the intensity of
each type of light will affect the amount of current produced. How does quantization help to explain
these observations? (6 points)

Answers

Answer:when a certain amount of violet light and yellow light shine on a metal surface only violet light produces an electric current describe how an increase in the intensity of each type of light will affect the amount of current produced, how does quantization help to explain these observations? Question thumb_up 100%

Explanation:

An increase in the intensity of violet light will lead to a proportional increase in the amount of electric current produced, as more violet photons will have enough energy to liberate electrons through the photoelectric effect.

However, an increase in the intensity of yellow light will not affect the electric current, as even with higher intensity, yellow photons do not possess sufficient energy to release electrons from the metal surface. This observation can be explained by quantization, which states that light energy is quantized into discrete packets called photons.

Each photon must possess a minimum energy threshold (the work function) to cause electron emission. Violet light photons have higher energy and can overcome the work function, while yellow light photons do not have enough energy and thus cannot produce a current, regardless of their intensity.

To learn more about electric current, here

https://brainly.com/question/29766827

#SPJ2

Two vehicles have a head-on collision. The vehicles essentially stick together and travel a certain distance for 20 seconds before coming to a complete stop. You are able to obtain the mass of both vehicles, the initial velocity for Vehicle A, and the final velocity for both vehicles immediately after the crash. Can you determine the momentum of both vehicles before the collision?

Answers

The answer is yes because of conservation of momentum. That is, the momentum before collision is equal to the momentum after collision.

What is Momentum ?

Momentum is the product of mass and velocity. It is a vector quantity. And it is measured in Kgm/s

If two vehicles have a head-on collision, the vehicles essentially stick together and travel a certain distance for 20 seconds before coming to a complete stop. The final velocity for both vehicles immediately after the crash can be obtain by using the formula

v = u - at

Where

v = final velocityu = initial velocitya = accelerationt = time

If you are able to obtain the mass of both vehicles, the initial velocity for Vehicle A, and the final velocity for both vehicles immediately after the crash, then you can determine the momentum of both vehicles before the collision by calculating the momentum of both after the collision because momentum is always conserved.

Or by first calculating the initial velocity for vehicle B by using the formula below

[tex]M_{1}U_{1} - M_{2}U_{2} = (M_{1} + M_{2} )V[/tex]

where

M1 = mass of the first objectU1 = initial velocity of the first objectM2 = mass of the second objectU2 = initial velocity of the second objectV = common final velocity

After we obtain initial velocity for vehicle B, we can calculate the momentum of both vehicles before the collision

Therefore, the momentum of both vehicles before the collision can be determined.

Learn more about Momentum here: https://brainly.com/question/25121535

#SPJ1

20 points!! Pls help
An object has a mass of 40 kilograms. What is its weight on the Moon? (The acceleration due to
gravity on the moon is 1.8 m/s².)
Select one:
a. 72 newtons
B. 97 newtons
c. 108 newtons
d. 235 newtons

Answers

Answer:  [tex]w=72N[/tex]

Explanation:

[tex]m=40\ kg\\g=1.8\ m/s^2\\w=mg\\w=40*1.8\\w=72N[/tex]

After looking at sound waves in this way, why do you think people prefer to view sound waves transverse waves rather than
longitudinal?

Answers

If a wave is longitudinal that means that it is travelling in the exact same direction, at the exact same angle as the medium in which it is propagating. You can think of it like a stretched out slinky. If you push the slinky forward a little and then pull it back to its original position, a wave travels in the direction of the slinky's coils. Sound waves are just like that but the medium is all the particles that constitute air.

You are on a hike in the mountains. You have 3.23 km left to go before your next camp-site. The sun will set in 5.34 h.
What average speed must you walk to get to camp at sunset

Answers

Average speed corresponds to the total distance traveled in a specific time interval. Given distance and time information just divide it.

Average speed = 3.23KM/5.34h = 0.604km/h

Hence, you should not have a speed of less than 0.604km/h if you want to catch the sunset.

Average speed is calculated by dividing the total distance something has traveled by the total time it took to travel that distance. Velocity is how fast something is going at a given moment. Average speed measures the average speed while moving. Average speed is calculated by dividing the total distance traveled by the time interval. For example, the average speed of a person who takes him 40 minutes to travel 20 miles north and then 20 miles south (to reach the same place) is 40 miles divided by his 40 minutes.

Learn more about Average speed here:-https://brainly.com/question/18102135

#SPJ1

Tarzan (m = 80 kg) is on a quest to save Jane. He runs towards a rope with a velocity of 12 m·s-1 . He grabs onto the rope. To what height will Tarzan swing?

Answers

The height to which Tarzan swings with a mass 80 kg and a velocity of 12 m / s is 7.2 m

K = 1 / 2 m v²

U = m g h

E = K + U

E = Total mechanical energy

K = Kinetic energy

U = Potential energy

m = Mass

g = Acceleration due to gravity

h = Vertical height

v = Velocity

Since Tarzan swings, it represents half the motion of pendulum. Therefore total mechanical energy is constant.

[tex]E_{i}[/tex] = [tex]E_{f}[/tex]

m = 80 kg

[tex]v_{i}[/tex] = 12 m / s

[tex]v_{f}[/tex] = 0

[tex]h_{i}[/tex] = 0

g = 10 m / s²

According to Law of conservation of Energy,

[tex]K_{i}[/tex] + [tex]U_{i}[/tex] = [tex]K_{f}[/tex] + [tex]U_{f}[/tex]

( 1 / 2 * m * [tex]v_{i}[/tex]² ) + ( m g [tex]h_{i}[/tex] ) = ( 1 / 2 * m * [tex]v_{f}[/tex]² ) + ( m g [tex]h_{f}[/tex] )

( 1 / 2 * 80 * 12² ) + 0 = 0 + ( 80 * 10 * [tex]h_{f}[/tex] )

[tex]h_{f}[/tex] = 5760 / 800

[tex]h_{f}[/tex] = 7.2 m

Therefore, Tarzan will swing to a height of 7.2 m

To know more about Law of conservation of Energy

https://brainly.com/question/12050604

#SPJ1

1. A scientist wants to test the sleeping effects of a mild animal tranquilizer on two of his
pet rats. He decides that he will put them in two cages of the same size and shape and
place them in the same area of his lab for 24 hrs. He decides that he is going to turn the
lights on at 5am and turn the lights of at 8pm each day. He feeds both rats lunch each day
at noon and chops up 5mg of animal tranquilizer into their food. He notes that at about 5pm
both rats fall asleep and wake up at about 5am the following day. He continues this
procedure for 15 days and notes the same pattern each day. He concludes that his study
shows that the animal tranquilizer will cause all animals to fall asleep at 5pm for a total of
12 hrs.


Did this experiment give accurate results? Why or why not?

Answers

The experiment is not accurate since the both rats get the tranquilizer and there is no control setting.

What is an experiment?

The quest for data and information is what would cause a scientist to perform an experiment. We know that an experiment is one that an experiment is one that we have to find the effect of the independent variable on the dependent variable.

In this case, the independent variable is the administration of the dose of the drug while the dependent variable is the number of hours that the pet rats are made to sleep.

Let us note that an experiment ought to have a control setting. The control setting of the experiment is what would serve to validate the experiment as we know. We can see that this experiment does not have a control setting therefore it is not accurate. This experiment would need to be reviewed a control setting should be added.

Learn more about experiment:https://brainly.com/question/11256472

#SPJ1

A toy plane is displaced 12m to the right and then 16m upward.
What is the magnitude of the resultant displacement?

Answers

Answer:
20m [E 53 degree N]

I attached a photo to answer you question. Hope this helps!

derive an expression for the speed v of the object just before it strikes the ground for general α0 . express your answer in terms of some or all of the variables v0 , α0, h, and the acceleration due to gravity g.

Answers

The speed of the object just before it hits the ground will be equal to,

v = √ ( v₀² + 2 g H )

What are newton's equations of motion?

Equations of motion describe the concept of the motion of an object such as the position, velocity, or acceleration at various times. Three equations of motion are derived for the motion of an object in 1D, 2D, and 3D.

To derive components are displacement(s), velocity, time(t), and acceleration(a). :

The 1st equation of motion is : v = u + at

The 2nd equation of motion is : S = ut + (1/2)at²

The 3rd equation of motion is : v² = u² + 2 g S

Given, the initial velocity of an object u = v₀ in an upward direction so it will be negative, u = - v₀

The displacement of an object is the height of the object from the ground S = H and It is downward so it will be positive.

The acceleration = g as the object moving towards the ground ( positive in downwards ). The final velocity of the object is V before it hits the ground.

Using the 3rd equation of motion to find the velocity of the object,

v² = u² + 2 g S

v² = (- v₀ )² + 2 g h

v = v₀² + 2 g H .

v = √ ( v₀² + 2 g H )

Learn more about equations of motion, here:

https://brainly.com/question/16782759

#SPJ1

1) [30 points] find the rotation matrix after a clockwise rotation of 240 o about an axis that describes equal angles with respect to the original coordinate axes. 2) [30 points] at a given time two point charges q1

Answers

Since, ABCDEF is a regular hexagon,

The measure of the central angle of a regular polygon = [tex]\frac{360}{n}[/tex]

where n = number of sides of the polygon

The measure of the central angle of a regular hexagon =[tex]\frac{360}{6}[/tex] = 60°

That means when we rotate a regular hexagon by an angle in the multiple of 60°, the hexagon overlaps itself.

Therefore, by the rotation of 240° clockwise, point C will replace the position of point A.

The image of hexagon ABCDEF will become CDEFAB.

A rotation matrix is a transformation matrix in linear algebra that is used to make a rotation in Euclidean space. Rotation matrices depict rotations about the origin since matrix multiplication has no effect on the zero vector (the coordinates of the origin). Rotation matrices provide an algebraic description of such rotations and are widely utilized in geometry, physics, and computer graphics computations. In some publications, the term rotation is broadened to cover improper rotations, which are defined by orthogonal matrices with determinants of 1 (rather than +1). These incorporate appropriate rotations and reflections (which invert orientation). In other circumstances, where reflections are not taken into account, the label proper may be omitted. This article adheres to the later convention.

To learn more about the Rotation matrix the given link:

brainly.com/question/22363471

#SPJ9

3. Over which of the following time intervals is
the acceleration of the object the greatest?
A. 0 s to 1 s
B. 1 s to 2 s
C. 2 s to 3 s
D. 4 s to 5 s

Answers

Answer:

A. 0s to 1s

Explanation:

ok bro hav a nise dey

a school bus slows to a stop with an average acceleration of -2m/s. the bus had an initial speed of 10m/s how long will it take the bus to come to a stop

Answers

It will take 2.5 seconds for the school bus to come to stop.

The initial velocity U of the School bus is 10m/s. As the bus has to come to stop, the final velocity V of the school bus will be 0 m/s.

The Acceleration a is -2m/s² and constant.

Because the Acceleration is constant. We can use the equations of motion,

Let say the School bus stopes after Reaching a distance D.

So, applying the equation of motion,

V = U + at

0 = 10 - 4t

-10 = -4t

t = 2.5 seconds.

So the school bus will come to stop after 2.5 seconds.

To know more about Equations of motion, visit,

https://brainly.com/question/25951773

#SPJ9

compare the magnitude of the acceleration of the object that you calculate from your measurements to the ""centripetal acceleration"" that you can calculate from the speed and the radius of the object.

Answers

The magnitude of the acceleration of the object that can be calculated from the measurements is compared to the "centripetal acceleration" that can be calculated from the speed and the radius is [tex]a_{c}[/tex] = r ( α t )²

The magnitude of the acceleration of the object that can be calculated the measurements is Angular acceleration. If angular velocity and time are given,

α = ω / t

α = Angular acceleration

ω = Angular velocity

t = Time.

[tex]a_{c}[/tex] = v² / r

[tex]a_{c}[/tex] = Centripetal acceleration

v = Tangential velocity

r = Radius

Rearranging angular acceleration formula as,

ω = α t

v = r ω

[tex]a_{c}[/tex] = v² / r

[tex]a_{c}[/tex] = ( r ω )² / r

[tex]a_{c}[/tex] = r² α² t² / r

[tex]a_{c}[/tex] = r ( α t )²

This is the relation between angular acceleration and centripetal acceleration.

Therefore, the comparison is [tex]a_{c}[/tex] = r ( α t )²

To know more about Centripetal acceleration

https://brainly.com/question/14465119

#SPJ1

Physics Suppose that, while in a squatting position, you stand on your hands, and then you pull up on your feet with a great deal of force. You are applying a large force to the bottoms of your feet, but no matter how strong you are, you will never be able to lift yourself off the ground. Use your understanding of force and motion to explain why this is not possible.

Answers

Explanation:

can you show me the answer of science

all of the following are true of neutral hand position except the . a. palm of the hand is held in an open and relaxed position b. fingers apply light pressure against the instrument handle c. little finger side of the palm is rotated slightly downward d. index finger and thumb are flattened against the handle

Answers

The correct answer is option D: index finger and thumb are flattened against the handle

All of the following are true of neutral hand position except the index finger and thumb are flattened against the handle.

When the wrist is straight or lightly bent then it is said to be in a neutral position.

Our neutral hand position refers to the palm of the hand being held in an open and relaxed position.

Similarly, the hand will be in a neutral position if the fingers apply light pressure against the instrument handle.

Another example is if we hold a glass full of water, then we will see that our thumb and forearm are aligned with respect to each other.

In the above-mentioned case, the hand will be in a neutral position.

If you need to learn more about rule of thumb click here:

https://brainly.com/question/943703

#SPJ4

the speed of light is . how far does light travel in ? set the math up. but don't do any of it. just leave your answer as a math expression. also, be sure your answer includes all the correct unit symbols.

Answers

Using speed and distance relation, It take the speed of 299 m to travel 30 cm .

What is speed ?

speed is the rate at where someone or something moves is able to operate.

Let us convert cm to m for distance

C = 2.998× 10^8 ms

The relationship between distance, speed, and time is

T =1 ×10^6/8

Because in this case you are being asked how long or time it takes, make it the subject.

Rounding the quotient produces.

Adjust it again to fit the scientific notation.

The result is -

d= c×t

d=2.998×10^8 m/s 10^6 m/s

d=2.998

As a mathematical expression, the time taken for light is 2.998

To know more about speedclick

https://brainly.com/question/24739297

#SPJ9

Other Questions
-23x + x - 6x + 10 + 2x If the pattern below was tripled, what would be the ratio of black squares to gray squares PLEASE, PLEASE HELP QUESTION IN PICTURE BELOW. WILL GIVE BRAINLIEST!!! timmy is a new employee at an organization and was given a laptop. upon connecting the laptop to the local wi-fi network, he receives an ip address of 192.168.58.127 but is not able to connect to the internet. what could be the problem? quizlet Mrs. Jenkins gave her class the function f(x)=(x-5)(x+1). Four students made a claim about the function. Each student's claim is below. Annie: The x-intercepts are (5,0) and (1,0) Jacob: The y-intercept is at (-5,0) Neil: The vertex is at (2, -9)Zoey: The midpoint between the x-intercepts is at (-2,0)Which student's claim about the function is correct? Simplify the expression.(4)66(4) 5 = 41 PART A: What is Roosevelts overall purpose in his speech? A) to inform Japan that the U.S. will take any means necessary to enact revengeB) to notify the American people of the losses suffered in the Japanese attacksC) to warn of impending danger in the form of more attacks from Japan and its alliesD) to reassure the American people that actions are being taken to protect the countryWhich letter choice is the correct answer to this question? A researcher at the center of disease control and prevention is studying the growth of a certain bacteria he starts his experiment with 300 bacteria that grow at a rate of 20% per hour This semester Hung Lee took four 3-credit courses at Pikes Peak Community College. She received an A in accounting and Cs in history, psychology, and algebra. What is her cumulative grade point average (assume A = 4 and C = 2) Need answers as soon as possible please. find the indicated probability. in one town, 72% of adults have health insurance. what is the probability that 7 adults selected at random from the town all have health insurance? What was the main focus of the Roman Senate? 5/8 divided by 2 1/10 compare and contrast boarding school and a day School Please answer the questions Why did those who settled inthe western part of NorthAmerica rely on hunting andgathering?A. There were no crops to grow.B. There was very little farmland.C. The game was very plentiful. you randomly select an integer from 0 to 9 (inclusively) and then randomly select an integer from 0 to 4 (inclusively). What is the probability of selecting a three both times? dake corporation's relevant range of activity is 3,100 units to 6,500 units. when it produces and sells 4,800 units, its average costs per unit are as follows: What was the main focus of Giovanni Pierluigi da Palestrina's musical works?O A.He focused on chants, motets, and ballets for Kings.O B. He focused on madrigals for noble courts of Europe.O C.He focused on works for the Catholic Church.O D.He focused on consort music for playwrights. tienes una urna con "x" esferas. cuales de la expresin algebraica de la extraccin de 3 esferas? porfaaaaa